Compare commits

...

811 Commits

Author SHA1 Message Date
shiz01 c9cd274b2b
Fix build for Gentoo 2022-05-22 11:26:18 +07:00
Vitaliy Filippov f826831282 Describe OSD placement tree and reweights 2022-05-17 10:42:11 +03:00
Vitaliy Filippov 5d47bbe04c Add documentation 2022-05-17 01:10:49 +03:00
Vitaliy Filippov 93a9f1ef89 Fix NFS socket read hangs 2022-05-11 21:06:56 +03:00
Vitaliy Filippov 2697aae909 Fix free_down_raw in cli status 2022-05-11 18:08:45 +03:00
Vitaliy Filippov 6b69db73ac Remove getrandom() usage 2022-05-11 11:25:20 +03:00
Vitaliy Filippov d48a824846 Fix some warnings 2022-05-10 12:42:58 +03:00
Vitaliy Filippov 40985282ff Fix build under GCC 8 2022-05-10 12:26:47 +03:00
Vitaliy Filippov acf403e886 Add install target for NFS proxy 2022-05-10 10:43:17 +03:00
Vitaliy Filippov cf03b9c84d Implement "primary affinity tags" 2022-05-09 22:37:23 +03:00
Vitaliy Filippov 7c2379d458 Simplified NFS proxy based on own NFS/XDR implementation 2022-05-07 01:01:20 +03:00
Vitaliy Filippov a2189100dd Make CLI functions usable in library form
Return results and errors in a variable instead of just printing them,
separate vitastor-cli main() from cli_tool_t, move positional argument
parsing to CLI main from command implementations.
2022-05-06 02:18:32 +03:00
Vitaliy Filippov bb84379db6 Release 0.6.17
- Fix incorrect reading of extra metadata block leading to extra unknown objects in stats
- Fix CSI driver volumeMode: Block support
- Add block PVC and pod examples
- Fix build under 32 bit architectures
- Fix slow connection ramp-up caused by up_wait_retry_interval
2022-05-06 02:18:01 +03:00
Vitaliy Filippov 714dda8151 Fix slow connection ramp-up caused by up_wait_retry_interval pausing operations on first connection attempt 2022-05-06 02:12:08 +03:00
Vitaliy Filippov 834554c523 LD_PRELOAD=libasan.so.5 fio in tests fails when vitastor is built with ASan 2022-05-05 02:11:34 +03:00
Vitaliy Filippov e718116f54 Fix incorrect reading of extra metadata block 2022-04-21 02:52:21 +03:00
Vitaliy Filippov 98e3528a14 Add block PVC and pod examples 2022-04-17 15:43:37 +03:00
Vitaliy Filippov 8e88f77101 Fix CSI driver volumeMode: Block support 2022-04-17 15:39:11 +03:00
Vitaliy Filippov caa2cc2e6c Fix 32bit build error 2022-04-16 01:48:24 +03:00
Vitaliy Filippov 842ba8b831 Use (uint64_t)1 instead of 1l / 1ul 2022-04-16 01:48:14 +03:00
Vitaliy Filippov 1493823f9e Note about starting monitors 2022-04-12 15:00:28 +03:00
Vitaliy Filippov c857272f44 Comment: epoch is uint64_t 2022-04-10 12:21:37 +03:00
Vitaliy Filippov 340a4b4f27 Release 0.6.16
- Implement `vitastor-cli status` (print cluster status) command
- Add a new `make-osd-hybrid.js` script to quickly prepare a lot of hybrid (HDD+SSD) OSDs
- Implement snapshot deletion for Cinder driver (only works in a healthy cluster)
- Fix a huge :) bug causing reads to return all zeroes during rebalance. Add a test to prevent it in the future
- Disconnect NBD proxy correctly without leaving a zombie [vitastor-nbd] process in D state
- Fix a rare write hang appearing with small write throttling enabled
2022-04-09 01:16:52 +03:00
Vitaliy Filippov 5118980315 Add a script to run all tests 2022-04-09 01:14:00 +03:00
Vitaliy Filippov d71cc174e3 Implement CLI status command 2022-04-09 00:25:51 +03:00
Vitaliy Filippov 0eb929f1ba Fix change_pg_count test (statistic reporting may take some time) 2022-04-08 11:58:53 +03:00
Vitaliy Filippov 83146fa3e2 Fix the same HUGE bug for regular reads during rebalance 2022-04-08 11:50:09 +03:00
Vitaliy Filippov 15dcaf7903 Add the same "rebalance" test with regular reads 2022-04-08 11:48:31 +03:00
Vitaliy Filippov cd18ef7323 Disconnect NBD proxy correctly without leaving a zombie [vitastor-nbd] process in D state 2022-04-07 16:03:35 +03:00
Vitaliy Filippov 39531ef1a6 Fix incorrect chained reads during rebalance (the bug detected by test_rebalance_verify.sh) 2022-04-07 15:56:58 +03:00
Vitaliy Filippov d334914948 Fix the test so it actually fails indicating a bug :-) 2022-04-07 15:56:26 +03:00
Vitaliy Filippov c373425562 Fix nbd log 2022-04-07 15:55:38 +03:00
Vitaliy Filippov 3615e57879 Register standby monitors in etcd in /mon/member 2022-04-04 00:48:52 +03:00
Vitaliy Filippov 0edc6fe5a6 Add notes about the new script 2022-04-03 13:04:34 +03:00
Vitaliy Filippov 9c30df83e3 Fix a HUGE :) bug in NBD proxy
The bug could result in corrupted data on large writes
2022-04-03 10:42:06 +03:00
Vitaliy Filippov a420c77107 Add rebalance-verify test 2022-04-03 10:42:06 +03:00
Vitaliy Filippov 4100d829c7 Allow to override log file for daemonized NBD proxy 2022-04-03 02:41:04 +03:00
Vitaliy Filippov 79ebda933e Fix a write hang with throttling due to timer reenterability / triggerability 2022-03-28 01:42:06 +03:00
Vitaliy Filippov 65d08e067e Add a script for preparing hybrid (HDD+SSD) OSDs 2022-03-28 01:11:26 +03:00
Vitaliy Filippov d289753df4 Implement snapshot deletion for Cinder driver 2022-03-08 11:41:29 +03:00
Vitaliy Filippov 85298ddae2 Release 0.6.15
- Make peering much faster in medium to large clusters
- Fix a reenterability issue which could rarely lead to peering process hangs
2022-03-06 19:16:34 +03:00
Vitaliy Filippov e23296a327 Rename cli_rm -> cli_rm_data, cli_snap_rm -> cli_rm 2022-02-24 14:34:14 +03:00
Vitaliy Filippov 839ec9e6e0 Shard clean_db by PGs to speedup listings 2022-02-20 00:21:24 +03:00
Vitaliy Filippov 7cbfdff41a Replace some throws with force_stop 2022-02-20 00:21:19 +03:00
Vitaliy Filippov 951272f27f Try to process PG one after another 2022-02-19 19:25:55 +03:00
Vitaliy Filippov a3fb1d4c98 Fix reenterability around set_timer 2022-02-19 18:28:12 +03:00
Vitaliy Filippov 88402e6eb6 Move next_request to run_cb_and_clear 2022-02-19 16:59:03 +03:00
Vitaliy Filippov 390239c51b Don't terminate HTTP requests with timeouts if response is already available in the socket 2022-02-19 13:37:12 +03:00
Vitaliy Filippov b7b2adfa32 Fix http client not continuing requests in case of failure to connect 2022-02-19 13:36:26 +03:00
Vitaliy Filippov 36c276358b Attempt to fix "head-of-line blocking" by LIST operations 2022-02-18 01:31:45 +03:00
Vitaliy Filippov 117d6f0612 Release 0.6.14
- Fix IPv6 address parsing
- Fix "cannot read bytes of undefined" in the monitor on a fresh DB
- Fix possible hangs of read requests on OSD restarts without immediate_commit=all mode
- Fix OSDs skipping misplaced recovery in some cases
- Fix OSDs possibly dying with "map::at" errors when other OSDs are stopped
- Fix division by zero in ls if all pool OSDs are down
2022-02-17 14:43:44 +03:00
Vitaliy Filippov 7d79c58095 Use the larger sockaddr_storage structure 2022-02-12 11:22:56 +03:00
Vitaliy Filippov 46d2bc100f Add some tolerance to stat calculation so it does not fail on a fresh DB 2022-02-11 16:37:16 +03:00
Vitaliy Filippov 732e2804e9 Fix operation dependency counter underflow for reads without immediate_commit=all mode 2022-02-11 10:54:11 +03:00
Vitaliy Filippov abaec2008c Fix OSDs missing misplaced recovery 2022-02-11 01:00:24 +03:00
Vitaliy Filippov 8129d238a4 Different fio versions have different types for xfer_buflen, but Vitastor anyway does not support 128-bit offsets 2022-02-10 01:21:04 +03:00
Vitaliy Filippov 61ebed144a Fix OSDs possibly dying with "map::at" errors when other OSDs are stopped 2022-02-09 10:35:29 +03:00
Vitaliy Filippov 9d3ba113aa Extract bind socket code into a utility function 2022-02-06 00:39:52 +03:00
Vitaliy Filippov 9788045dc9 Fix division by zero in ls if all pool OSDs are down 2022-02-05 17:03:37 +03:00
Vitaliy Filippov d6b0d29af6 4k MEM_ALIGNMENT 2022-02-05 17:03:37 +03:00
Vitaliy Filippov 36f352f06f Release 0.6.13
- Fix client hangs possible on OSD restarts (bug affected versions from 0.5.11)
- Fix "Assertion `sqe != NULL' failed" io_uring-related crashes possible
  on some kernels (0.6.11 increased probability of this bug)
- Fix timeout=0 in NBD proxy
- Fix build under centos 7
2022-02-03 01:50:30 +03:00
Vitaliy Filippov 318cc463c2 Fix warnings 2022-02-03 01:50:30 +03:00
Vitaliy Filippov 145e5cfb86 MCL_ONFAULT is not available under centos 7 2022-02-03 01:42:19 +03:00
Vitaliy Filippov 73ae578981 Add osd_memlock option 2022-02-02 01:40:22 +03:00
Vitaliy Filippov 20ee4ed758 Update some parameter docs 2022-02-01 22:46:13 +03:00
Vitaliy Filippov 63de79d1b2 Change > to | to preserve newlines 2022-02-01 22:45:12 +03:00
Vitaliy Filippov f712967079 And one more sqe starvation fix 2022-02-01 02:50:16 +03:00
Vitaliy Filippov df0cd85352 Fix another part of the "async sqe clear" bug (followup to d9857a5340) 2022-02-01 01:14:56 +03:00
Vitaliy Filippov ebaf4d7a72 Fix compatibility with fio 3.28+ 2022-01-31 23:39:14 +03:00
Vitaliy Filippov d4bc10542c Fix compatibility with liburing >= 2.1 where it only has __pad2[2] 2022-01-31 22:49:40 +03:00
Vitaliy Filippov 140309620a Free recv_buf in nbd_proxy 2022-01-31 20:37:58 +03:00
Vitaliy Filippov 0a610ee943 Destroy the client after completing CLI command 2022-01-31 18:27:04 +03:00
Vitaliy Filippov f3ce166064 Do not print nan% in df when a pool has no available OSDs 2022-01-31 18:23:57 +03:00
Vitaliy Filippov 717d303370 Handle get_sqe failures, don't die with "will fall out of sync" in epoll_manager
Problem is that in recent kernels io_uring may return completions BEFORE
clearing the submission queue. I.e. for example its capacity is 512, there
were 512 requests, one of them completed, so when the request completion is
processed the queue "should have" 1 free slot. But sometimes it doesn't because
io_uring doesn't always clear the submission queue before sending CQE :-/
2022-01-31 02:52:20 +03:00
Vitaliy Filippov d9857a5340 Check for SQEs, not for completions
Should finally fix Assertion `sqe != NULL' failed introduced after journaling
refactor in 0.6.11...
2022-01-31 02:19:10 +03:00
Vitaliy Filippov eb5d9153e8 Fix build under centos 7 2022-01-30 20:29:44 +03:00
Vitaliy Filippov ae6d1ed1d5 Remove completed items 2022-01-30 20:20:06 +03:00
Vitaliy Filippov d123e58ea3 Fix yaml syntax - remove ` in default 2022-01-29 02:08:48 +03:00
Vitaliy Filippov d9869d8116 Add parameter documentation 2022-01-28 02:45:54 +03:00
Vitaliy Filippov 4047ca606f Add missing cancel_op(currently being read op) when stopping a client
Fixes client hangs possible after stopping & restarting an osd.
Hangs happened when a connection was closed in the middle of reading a READ
operation reply from the network. In this case the operation being read was
in read_op and the client didn't free it when closing the connection.

Test case for msgr_read.cpp:
- Partially read reply for a READ operation
- stop_client()
- Check that the READ operation returns EPIPE

The bug was actually introduced in 0.5.11.
2022-01-28 01:53:52 +03:00
Vitaliy Filippov 218e294e9c > 0, of course 2022-01-24 13:36:09 +03:00
Vitaliy Filippov c1929cabe0 Release 0.6.12
etcd connection stability, clang & elbrus support

- Fix build under CLang and Elbrus LCC compilers, making Vitastor compatible
  with Elbrus CPUs :)
- Completely fix the bug where OSDs didn't connect to peers and incorrectly marked
  PGs as incomplete
- Limit I/O depth for deletes the same way as for small writes. Makes OSD crashes
  with "Assertion failed: sqe != NULL" during image deletion go away
- Fix a very old, but rare, journaling bug (credits to https://github.com/mirrorll)
- Fix flushing of unclean journaled objects leading to OSDs sometimes hanging
  after failover in EC setups (bug was introduced in 0.6.7)
- Fix several problems that could prevent smooth operation of a Vitastor cluster
  under the condition of partial etcd failure:
  - OSDs could randomly fail due to too strict error handling
  - New clients and OSDs could be unable to start because of the lack of retries
  - CLI could fail some commands because of the lack of retries
  - Monitor could stop receiving state updates because of the lack of websocket pings
- Fix monitor being unable to rebalance PGs after a downscale of pool pg_size (3->2)
- Exit with failure when trying to nbd map or benchmark a non-existing image
- Use HTTP keep-alive for etcd connections
- Allow to configure etcd request timeouts and retries
- Allow to configure NBD timeout, max devices and partitions, and set default to
  up to 64 devices with up to 3 partitions each
2022-01-24 01:15:25 +03:00
Vitaliy Filippov cc6b24e03a Allow to configure NBD timeout, max devices and partitions
Also set default NBD devices/partitions to 64/3, Linux default is 16/16 which is way too low
2022-01-24 01:15:19 +03:00
Vitaliy Filippov 0757ba630a Do not happily NBD "map" non-existing images, do not try to benchmark them too 2022-01-23 23:03:42 +03:00
Vitaliy Filippov 2a0b881685 Respect max_write_iodepth for deletes 2022-01-23 22:05:23 +03:00
Vitaliy Filippov 9a15b843ff Do not set pg_real_size to 0 2022-01-23 20:15:04 +03:00
Vitaliy Filippov 8dc1ffb13b Try to connect with PG peers before deciding it's incomplete :)
I already attempted to fix it in 0.6.11, but it happened so that the fix was
only partial :)
2022-01-23 19:19:26 +03:00
Vitaliy Filippov ba63af49b4 Add etcd retries everywhere (they were missing in some places) 2022-01-23 17:21:48 +03:00
Vitaliy Filippov 31b9c683ee Fix flushing of unclean objects
This was preventing OSD failover when there were some unclean objects.
Bug was introduced in aa436027c8
2022-01-23 00:45:11 +03:00
Vitaliy Filippov 3abcac058f Check for double response_callback call more 2022-01-23 00:26:20 +03:00
Vitaliy Filippov e01c4db702 Add paranoic if()s to prevent accidental double free of etcd_watch_ws 2022-01-23 00:16:09 +03:00
Vitaliy Filippov a5cf06acd0 Remove etcd timeout and keepalive interval hardcode 2022-01-23 00:00:00 +03:00
Vitaliy Filippov 9c3653b1e1 Handle EINTR 2022-01-22 23:59:37 +03:00
Vitaliy Filippov 23e578b6a2 Fix common.sh 2022-01-21 01:51:25 +03:00
Vitaliy Filippov 7920414bee Fix build under older gcc (debian buster) 2022-01-20 10:34:52 +03:00
Vitaliy Filippov 098e369a3b Fix rand initialization, add etcd connection/disconnection logging 2022-01-20 00:45:49 +03:00
Vitaliy Filippov a43ef525a2 Remove two last end()s from http_client (should have been removed in the keepalive patch) 2022-01-20 00:44:18 +03:00
Vitaliy Filippov 8a6b07d8f7 Add a 2/5 etcd failure test 2022-01-20 00:43:22 +03:00
Vitaliy Filippov 2c930d55fb
Merge pull request #41 from promobit-bitblaze/1-small-fix
#1 fix deps
2022-01-18 11:19:08 +03:00
Mikhail Koshel d798e0821e #1 fix deps 2022-01-18 13:30:53 +06:00
Vitaliy Filippov e591a3e9f7 Include sys/stat.h in messenger.cpp
No idea why, but it builds without it on x86 and does not build on e2k
2022-01-17 13:43:29 +03:00
Vitaliy Filippov 77cc18420a Fix leaks detected by clang scan-build (only 1 of 4 may be important though) 2022-01-16 00:11:59 +03:00
Vitaliy Filippov 7bdd92ca4f Fix build under clang and some warnings
Build problems fixed:
- void* pointer arithmetic which is a GNU extension (works as byte*)
- "variable size object may not be initialized" which is OK under GCC
- nullptr_t related error in json11 (it lacks 'operator <' in clang)

Warnings fixed:
- empty nested struct initializer { 0 } replaced by {}
- removed several unused lambda captures
2022-01-16 00:02:54 +03:00
Vitaliy Filippov 8f64fc61e7 Ignore empty events in mon 2022-01-08 11:41:00 +03:00
Vitaliy Filippov 4a9f001d9e Make mon also ping etcd websockets regularly 2022-01-05 17:28:51 +03:00
Vitaliy Filippov 8c908316d9 Add a test with an OSD being added 2022-01-05 17:06:24 +03:00
Vitaliy Filippov 515a2e6e33 Only die when detecting a real race condition, not just a CAS failure 2022-01-05 17:05:25 +03:00
Vitaliy Filippov 68b6763ebe Add asserts for lp-optimizer tests, pass `ordered` from the monitor 2022-01-03 20:37:07 +03:00
Vitaliy Filippov 9c6168bf17 Remove fill_parsed_response 2022-01-03 20:08:26 +03:00
Vitaliy Filippov 08e467270a Fix pg_size changing from 3 to 2 2022-01-03 17:56:54 +03:00
Vitaliy Filippov 5473d5b4a2 Rework HTTP client to use keepalive, move getifaddr_list to addr_util 2022-01-03 14:52:01 +03:00
Vitaliy Filippov c3304bce27
Merge pull request #38 from mirrorll/master
journal check_available error
2021-12-31 12:45:16 +03:00
Vitaliy Filippov ec2852c598 Add minsize_1 test 2021-12-28 10:54:36 +03:00
Vitaliy Filippov b9f5c2a823 Support zero-copy send in fio_sec_osd to allow testing it
Prelimilary results:
- CPU usage drops significantly. For example, in T1Q8 128K write test against
  stub_uring_osd with 10G network and Athlon X4 860k CPU it drops from 100% to 30%
- Latency becomes slightly worse. In T1Q1 4K write test in the same environment
  latency increases from 56 to 63 us.
- Small write throughput also becomes slightly worse. In T1Q128 4K write test
  against stub iops decreases from 138k to ~110k (unstable, fluctuates 100k..120k).
  Note that this is without io_uring, of course.
2021-12-27 02:12:44 +03:00
Vitaliy Filippov e9d2f79aa7 Support reading bitmaps in fio_sec_osd 2021-12-27 02:12:44 +03:00
Vitaliy Filippov 0785bdf8b3 Release 0.6.11
- Slightly reduce journaling write amplification (requires no_same_sector_overwrites=false)
- Fix listen_backlog (it was 0) because it could more than halve OSD socket send speed
- Support IPv6 OSD addresses
- Do not try to initialize client in simple-offsets
- Fix OSDs sometimes marking PGs incomplete instead of trying to connect with peers
- Allow to configure OSD placement in node_placement
- Allow to run with 4k sector size block devices. Natural, but it was forbidden
2021-12-26 21:11:24 +03:00
Vitaliy Filippov b57e44748b Send 4 byte bitmap in stub_uring_osd 2021-12-25 11:38:13 +03:00
Vitaliy Filippov 1bbe62f29c Fix uninitialized listen_backlog which was leading to REALLY SLOW send speeds!!! 2021-12-25 11:38:13 +03:00
lihai 3061c30132 journal check_available error 2021-12-21 09:39:58 +08:00
Vitaliy Filippov 20a4406acc Support IPv6 OSD addresses 2021-12-19 10:42:17 +03:00
Vitaliy Filippov f93491bc6c Implement journal write batching and slightly refactor journal writes
Slightly reduces WA. For example, in 4K T1Q128 replicated randwrite tests
WA is reduced from ~3.6 to ~3.1, in T1Q64 from ~3.8 to ~3.4.

Only effective without no_same_sector_overwrites.
2021-12-16 00:27:17 +03:00
Vitaliy Filippov 999bed8514 Fix opening regular files as blockstore 2021-12-15 02:08:58 +03:00
Vitaliy Filippov 3f33095fd7 Do not try to initialize client in simple-offsets 2021-12-15 02:07:27 +03:00
Vitaliy Filippov dd74c5ce1b Fix OSDs marking PGs incomplete instead of trying to connect with peers 2021-12-14 01:57:51 +03:00
Vitaliy Filippov c6d104ecd6 Print object version on fatal overwrite 2021-12-14 01:57:04 +03:00
Vitaliy Filippov e544aef7d0 Fix test rw_blocking 2021-12-12 23:24:50 +03:00
Vitaliy Filippov 616c18c786 Fix stub_uring_osd 2021-12-12 23:06:11 +03:00
Vitaliy Filippov fa687d3878 Allow to configure OSD placement in node_placement 2021-12-12 01:25:45 +03:00
Vitaliy Filippov 2c7556e536 Allow to run with 4k sector size. Natural, but it was forbidden 2021-12-11 22:03:16 +00:00
Vitaliy Filippov 2020608a39 Release 0.6.10
- Implement a storage plugin for Proxmox. Now you can use Vitastor with Proxmox!
- Implement `vitastor-cli df` (pool space usage statistics) command
- Add glob pattern support for `vitastor-cli ls`
- Fix several bugs in other CLI commands (resize, create --parent, modify --readonly)
- Use 512 byte logical block size in QEMU driver by default (and thus don't require to set it in QEMU options)
2021-12-10 21:40:12 +03:00
Vitaliy Filippov 139b98d80f Exclude block/vitastor.c from patches and add script to easily re-add it 2021-12-10 21:38:36 +03:00
Vitaliy Filippov f54ff6ad5d Do not crash in simple-offsets when some options are empty, too 2021-12-10 12:27:25 +03:00
Vitaliy Filippov b376ef2ed9 Do not crash on empty matched_addrs 2021-12-10 11:40:59 +03:00
Vitaliy Filippov 5a234588b9 Do not die when invoked via `vita` symlink 2021-12-10 02:45:16 +03:00
Vitaliy Filippov b82c30328f Use vitastor-cli df to show pool stats in Proxmox 2021-12-10 02:42:31 +03:00
Vitaliy Filippov 0ee5e0a7fe Implement vitastor-cli df command 2021-12-10 02:37:02 +03:00
Vitaliy Filippov 0a1640d169 Some important fixes for our new Proxmox driver 2021-12-10 01:17:06 +03:00
Vitaliy Filippov 3482bb0860 Fix readonly/readwrite option parsing 2021-12-10 00:52:59 +03:00
Vitaliy Filippov 526995f486 Do not skip empty iops in listings 2021-12-10 00:52:59 +03:00
Vitaliy Filippov 073b505928 Package Proxmox plugin as pve-storage-vitastor 2021-12-10 00:22:45 +03:00
Vitaliy Filippov a8b21a22d0 Add patch for pve-qemu 6.1 2021-12-09 02:57:43 +03:00
Vitaliy Filippov 0b1ffba62b Add Proxmox storage driver 2021-12-09 02:26:54 +03:00
Vitaliy Filippov 8dfbd7943c Use logical block size = 512 bytes by default 2021-12-08 23:43:40 +03:00
Vitaliy Filippov 39e7f98e54 Allow to change etcd IP in tests 2021-12-08 23:00:48 +03:00
Vitaliy Filippov 3a83a32cb7 Aaand now fix create --parent :D 2021-12-08 23:00:34 +03:00
Vitaliy Filippov 20d5ed799a Add glob pattern matching for ls 2021-12-08 23:00:34 +03:00
Vitaliy Filippov b262938bca Fix naggy "Failed to get RDMA device list: Unknown error -38" 2021-12-08 02:02:30 +03:00
Vitaliy Filippov 7e54242251 Add patches for Proxmox QEMU 5.1 and 52 2021-12-05 17:45:01 +03:00
Vitaliy Filippov c3c2e68cc1 Now fix resize command :D 2021-12-05 01:38:08 +03:00
Vitaliy Filippov aa1e21dd99 Release 0.6.9
New features:
- Build Vitastor driver as part of QEMU
- Implement renaming images in CLI (vitastor-cli modify --rename)
- Add vitastor-cli alloc-osd and simple-offsets commands and use them in make-osd,
  thus removing the dependency on etcdctl
- Make monitor remove stale deleted inode statistics from etcd automatically
- Implement OSD address selection from a subnet, thus removing the need to specify
  OSD addresses in startup scripts explicitly

Bug fixes:
- Fix client failover in case of etcd shutdown or crash (make client survive etcd failures)
- Stick to the last live etcd in OSD and mon to prevent random failures when one of etcds is down
- Fix incorrect copying of data from journal to the data device which could lead to data corruption
- Prefer local etcd IPs in OSD
- Remove the total PG count restriction in optimize_change which was sometimes leading
  to inability to redistribute PGs over OSDs
- Fix error response parsing on a failed pg state report
- Fix slow linear writes with RDMA by changing default buffer settings
- Fix possible 'TypeError' in openstack nova when using Vitastor cinder driver
- Fix bugs in vitastor-cli create, ls, rm, modify commands

Patch changes:
- Add a patch for libvirt 7.6
- Add patches for QEMU 6.0 and 6.1
- Fix config file path XML location parsing in libvirt patches
- Replace _ with - in QEMU options
- Fix possible 'TypeError' in openstack nova when using Vitastor cinder driver
- Fix possible crashes of QEMU block driver in case of incorrect options
2021-12-03 10:58:54 +03:00
Vitaliy Filippov f4b57d487f Remove +deb10u1 from libvirt version 2021-12-03 10:56:44 +03:00
Vitaliy Filippov 711ecd2f8e Add a Dockerfile to build libvirt 2021-12-03 03:00:10 +03:00
Vitaliy Filippov 9fca01dc62 Add a forgotten return statement 2021-12-03 00:41:49 +03:00
Vitaliy Filippov 0bd3a94efd Use qdict_get_try_int because qdict_get_int may segfault on a missing key 2021-12-03 00:22:17 +03:00
Vitaliy Filippov 9ffdeef93b Install the built liburing version in el8 dockerfile 2021-12-03 00:04:18 +03:00
Vitaliy Filippov 589892d501 Fix rpm dockerfiles 2021-12-02 10:19:47 +03:00
Vitaliy Filippov 5fe3a40416 More fixes for QEMU 2.x :) 2021-12-02 02:25:50 +03:00
Vitaliy Filippov a453db9c8e An attempt to automatically build patched specs inside Docker is mostly broken for now 2021-12-02 01:51:48 +03:00
Vitaliy Filippov e6498a52ca Rename 4.2 el7 spec patch 2021-12-02 01:47:44 +03:00
Vitaliy Filippov 4bc41aed9d Add patches for QEMU 6.0 and for 6.0 RPM spec 2021-12-02 01:47:20 +03:00
Vitaliy Filippov 4da51f9c4c Update QEMU 3.1 patch 2021-12-02 01:29:21 +03:00
Vitaliy Filippov c6cee6f734 Update QEMU 5.0 patch 2021-12-02 01:27:00 +03:00
Vitaliy Filippov 6fc08f5581 Update CentOS 8 QEMU 4.2 spec patch 2021-12-02 01:23:43 +03:00
Vitaliy Filippov 15957b7d13 Update QEMU 4.2 patch and CentOS 7 QEMU 4.2 spec patch 2021-12-02 01:03:19 +03:00
Vitaliy Filippov 09a3987e83 Remove vitastor-qemu from RPM specs 2021-12-01 23:42:20 +03:00
Vitaliy Filippov cd6820c439 Update QEMU 5.1/5.2 patch to include internal vitastor driver 2021-12-01 02:08:02 +03:00
Vitaliy Filippov dcd8f5e76c Remove qemu shenanigans from vitastor build dockerfile 2021-12-01 02:00:14 +03:00
Vitaliy Filippov 5859f913fc Fix client failover in case of etcd shutdown or crash 2021-12-01 00:33:02 +03:00
Vitaliy Filippov cac6a1d8d1 Don't need to download fio in qemu dockerfile anymore 2021-11-30 22:24:48 +03:00
Vitaliy Filippov a0c32e7de9 Update patch for libvirt 7.6 2021-11-30 10:23:51 +03:00
Vitaliy Filippov 8b37610dd0 Rename patch to Nova 23 because it's actually closer 2021-11-30 02:05:24 +03:00
Vitaliy Filippov ae82ca3b08 Pass config path in <config file="" /> element instead of an attribute
libvirt has always had config in the element for Ceph, we don't want to break it
2021-11-30 02:02:07 +03:00
Vitaliy Filippov 92362027a8 Build vitastor driver as part of the QEMU package by default
Old behaviour can be restored with cmake var WITH_QEMU=true
2021-11-29 02:05:26 +03:00
Vitaliy Filippov c4aeeda143 Fix index removal in vitastor-cli rm 2021-11-29 02:00:05 +03:00
Vitaliy Filippov 24f0f8278a Fix modify --readwrite 2021-11-29 01:52:21 +03:00
Vitaliy Filippov 95496d0845 Implement renaming images in CLI (vitastor-cli modify --rename) 2021-11-28 22:38:57 +03:00
Vitaliy Filippov 94b1f09ef2 Create snapshots in the same pool by default 2021-11-28 21:50:42 +03:00
Vitaliy Filippov 32b1312abb Remove stale deleted inode statistics in monitor 2021-11-28 21:02:05 +03:00
Vitaliy Filippov d5c8fde5de Remove kludgy $IP and $ETCD_MON parsing from make-osd.sh, suggest to use vitastor.conf 2021-11-28 18:27:05 +03:00
Vitaliy Filippov 7a0b5212fe Exit if unable to restart watches
FIXME: It's probably not OK for the client to exit in this case
2021-11-28 01:43:31 +03:00
Vitaliy Filippov a8f5c71ae8 Use the same etcd address selection algorithm in the monitor 2021-11-28 01:19:42 +03:00
Vitaliy Filippov ce5b6253ab Make OSDs stick to the last successful etcd address
Previously OSDs were selecting a new random etcd from the cluster
on every request so they were failing randomly when part of etcds was down
2021-11-27 23:48:56 +03:00
Vitaliy Filippov 8398ad0117 Fix #36 - Fix old version data sometimes overriding new version data
Reproduction case:
- v3 = (offset 4kb, length 16kb)
- v2 = (offset 24kb, length 16kb)
- v1 = (offset 16kb, length 16kb)
- At the third step it was inserting 16..24kb instead of 20..24kb
2021-11-27 01:17:45 +03:00
Vitaliy Filippov fea451b4db Prefer local etcd in OSD 2021-11-27 00:36:53 +03:00
Vitaliy Filippov 6e12aca53b Remove the total PG count restriction in optimize_change which was leading to unfeasible problems sometimes 2021-11-26 23:05:37 +03:00
Vitaliy Filippov 8b007d531f
Merge pull request #33 from moly7x/fix-TypeError
Fixed TypeError
2021-11-25 14:47:31 +03:00
Vitaliy Filippov 7b7f20fb89
Merge pull request #34 from mirrorll/master
report pg state failed
2021-11-25 10:26:42 +03:00
Vitaliy Filippov 300d507026 Fix capture of out in alloc_osd 2021-11-25 10:20:01 +03:00
harley 6886171289
report pg state failed
after report pg state failed parse response error
2021-11-25 09:34:34 +08:00
Vitaliy Filippov 43f8ea47a0 Ok, something is not allowed somewhere in C99 2021-11-24 11:28:10 +03:00
Vitaliy Filippov 6e0e172e15 Implement OSD address selection from a specified subnet 2021-11-23 21:59:26 +03:00
Vitaliy Filippov 655a2c871d Move make-osd.sh into vitastor-client package 2021-11-21 16:33:33 +03:00
Vitaliy Filippov 879fe9b2b4 Add a patch for qemu 6.1 and replace _ with - in qemu options 2021-11-21 16:24:30 +03:00
Vitaliy Filippov 660c3f7b0d Change default RDMA settings to 128x 129K buffers
129K to leave extra space for the header

The problem with 8x 1M buffers is that the following happens with,
for example, 2 OSDs and 4M T1Q1 write:
- Server posts 8 receives
- Client posts 8 sends
- WRs are processed by the RDMA stack, but the OSD doesn't have the time
  to handle them and doesn't refill buffers
- Client posts 1 more send
- RNR retransmission happens and performance drops to zero

Overall it seems that RDMA support should be reworked to use real 'RDMA'
operations i.e. operations writing into remote memory. This has an
additional advantage of avoiding a copy at the receive side of the OSD.
2021-11-21 12:05:52 +03:00
Vitaliy Filippov f0ebfae3b8 Fix vitastor-cli alloc-osd, use vitastor-cli in make-osd.sh 2021-11-21 00:01:03 +03:00
Vitaliy Filippov eb7ad2c114 Fix empty size syntax, use C version of simple-offsets in tests 2021-11-20 23:51:26 +03:00
Tân Lê b4235b4edf
Fixed TypeError
Fix `TypeError: Argument must be bytes or unicode, got 'int'` in nova-compute.
2021-11-19 13:37:47 +07:00
Vitaliy Filippov cd21ff0b6a Rewrite simple-offsets.js in C/C++ 2021-11-19 02:39:56 +03:00
Vitaliy Filippov d3903f039c Implement alloc-osd (allocate a new OSD number) command 2021-11-19 02:39:37 +03:00
Vitaliy Filippov 66fe1a469b Additionally balance parity chunks over OSDs using round-robin when generating initial distribution 2021-11-16 21:02:39 +03:00
Vitaliy Filippov 24409bd4c4 Oops # 2. Fix vitastor-cli create broken due to json11 :D 2021-11-16 12:52:35 +03:00
Vitaliy Filippov c5029961ea Oops. Fix vitastor-cli ls 2021-11-16 12:39:41 +03:00
Vitaliy Filippov 1ca1143d4a Add fio_version and qemu_version variable example files back 2021-11-15 17:21:01 +03:00
Vitaliy Filippov 920345f7b6 Release 0.6.8
- Build separate packages for OSD, monitor, client, C header, fio and QEMU drivers
  instead of one package which included everything
2021-11-15 00:49:21 +03:00
Vitaliy Filippov 75b47a6298 Generate pkg-config file 2021-11-15 00:49:21 +03:00
Vitaliy Filippov 6e446653ae Include README 2021-11-15 00:00:02 +03:00
Vitaliy Filippov e51edf2542 Split into multiple rpm packages 2021-11-14 23:48:50 +03:00
Vitaliy Filippov ce170af91f Split into multiple Debian packages 2021-11-14 23:31:30 +03:00
Vitaliy Filippov 7eabc364bf Release 0.6.7
- Implement CLI commands for listing, viewing I/O statistics, creating,
  snapshotting, cloning, resizing and modifying images. All these operations
  are covered by 3 commands: ls, create, modify
- Implement an important fix to prior OSD set tracking for PGs. The previous
  version had an issue which could lead to data loss due to an OSD with older
  copy of the data thinking it has the newest copy
- Fix I/O statistics aggregation in the monitor
- Several minor fixes for Cinder driver
- Fix QEMU driver to be compatible with QEMU 2.x > 2.0
- Fix stalls sometimes possible in configurations without immediate_commit due
  to insufficient amount of automatic internal fsync operations
- Add `vita` alias for `vitastor-cli`
2021-11-13 23:23:55 +03:00
Vitaliy Filippov a346f84c69 Allow to show only specific images in listing 2021-11-13 23:23:55 +03:00
Vitaliy Filippov 71a0c1a7b9 Fix list sorting 2021-11-13 23:23:55 +03:00
Vitaliy Filippov 20e86c7d84 Note about vitastor-cli 2021-11-13 22:39:17 +03:00
Vitaliy Filippov 110b39900b Rename the new "set" command to "modify" 2021-11-13 22:39:17 +03:00
Vitaliy Filippov 697ee30a26 Add ARG REL into build Dockerfiles 2021-11-13 22:39:17 +03:00
Vitaliy Filippov 42479b4590 Fix vitastor-nbd list, add ls alias 2021-11-13 22:39:17 +03:00
Vitaliy Filippov 6e82044e84 Add `vita` symlink 2021-11-13 22:39:17 +03:00
Vitaliy Filippov 2cb3e84882 Implement CLI set (resize, change readonly status) command 2021-11-13 22:39:17 +03:00
Vitaliy Filippov 32614c5bc8 Add a test for the last change ("split-brain avoidance", lol) 2021-11-13 22:39:17 +03:00
Vitaliy Filippov aa436027c8 Report pg/history from OSD on every degraded activation
Required to prevent data loss due to activation of an OSD with older data
when PG OSD set change doesn't occur. I.e. fixes the simplest case:
- Run 2 OSDs with 1 PG
- Start writing into the PG
- Stop OSD 2
- Stop OSD 1
- Start OSD 2

After this change the PG will refuse to start after the last step.
2021-11-13 22:39:17 +03:00
Vitaliy Filippov 577a563b91 Allow to disable colored output 2021-11-11 01:41:58 +03:00
Vitaliy Filippov e4efa2c08a Improve vitastor-cli ls - show I/O statistics, allow to sort & limit output 2021-11-11 01:41:58 +03:00
Vitaliy Filippov 0f3f0a9d29 Calculate average statistics in mon, remove buggy "fix_stat_overflows" 2021-11-11 00:20:57 +03:00
Vitaliy Filippov 0544a16f95
Merge pull request #30 from moly7x/moly7x-fix-No-weighed-backend-found
Fix No weighed backend found
2021-11-10 17:13:17 +03:00
Tân Lê 30d8930958
Revert spacing in comment 2021-11-10 10:47:58 +07:00
Tân Lê baf003fbd3
Revert newline in comment 2021-11-10 10:43:24 +07:00
Tân Lê ba39a38dc4
Fix No weighed backend found 2021-11-10 10:27:01 +07:00
Vitaliy Filippov d528cd77f1 Fix install_symlink 2021-11-09 16:42:29 +03:00
Vitaliy Filippov 6e6f407df3 Simplify & fix monitor stats aggregation 2021-11-09 01:41:22 +03:00
Vitaliy Filippov 4d43774cbb Use 5s etcd_report_interval by default 2021-11-09 01:27:12 +03:00
Vitaliy Filippov a1488f7217 Fix qemu_driver to build with QEMU 2.x (previously it was only correct for QEMU 2.0) 2021-11-08 23:07:31 +03:00
Vitaliy Filippov 404e07d365 Implement image/snapshot/clone creation and listing by pool 2021-11-07 01:01:07 +03:00
Vitaliy Filippov b3dcee0d43 Also print "bare" inodes with missing config if they occupy space 2021-11-06 14:56:41 +03:00
Vitaliy Filippov 609bd4eb59 Remove naggy RDMA messages when log level is zero 2021-11-06 14:36:23 +03:00
Vitaliy Filippov 8e445ddc9a Begin to implement CLI: implement listing, add help, add create stub 2021-11-06 14:32:19 +03:00
Vitaliy Filippov ffb06536ff Revoke lease in mon on SIGINT & SIGTERM, fix raw_to_usable calculation 2021-11-06 13:54:35 +03:00
Vitaliy Filippov eeecab20c2
Merge pull request #28 from moly7x/fix
Fix building QEMU 3.1
2021-11-06 11:12:17 +03:00
Tân Lê e889ac4209
Fix building QEMU 3.1 2021-11-05 13:45:51 +07:00
Vitaliy Filippov cfe8de9b84 Autosync based on number of unstable ops to prevent journal stalls 2021-10-30 14:26:48 +03:00
Vitaliy Filippov 24b9b19066 Change rm to rm-data as it was renamed 2021-10-23 10:39:20 +03:00
Vitaliy Filippov ef645ee0c2
Merge pull request #26 from moly7x/fix
FIX ERROR cinder.volume.drivers.vitastor KeyError: 'total_raw_tb'
2021-10-22 21:29:52 +03:00
Tân Lê 8a9bae5216 FIX ERROR cinder.volume.drivers.vitastor KeyError: 'total_raw_tb' 2021-10-22 11:38:50 +07:00
Vitaliy Filippov da99686a15 Correctly aggregate pool statistics for unknown pools 2021-10-21 18:58:56 +03:00
Vitaliy Filippov dcc03ee41f Add go.sum 2021-10-19 02:42:10 +03:00
Vitaliy Filippov fb2f7a0d3c Release 0.6.6
- New command-line tool: vitastor-cli
- Implement layer (snapshot/clone) merge and delete
- Remove 'bool' from the C header
- Fix a very rare flusher stall
- More diagnostics now printed for slow ops in the log
2021-10-19 02:26:37 +03:00
Vitaliy Filippov 38d85da19a Fix build for older gcc 2021-10-19 02:26:37 +03:00
Vitaliy Filippov dc3caee284 Add Dockerfile 2021-10-19 02:26:37 +03:00
Vitaliy Filippov 89dcda1fed Remove "bool" from the C header 2021-10-18 01:49:07 +03:00
Vitaliy Filippov 1526e2055e Do not crash with RDMA when receiving garbage, free RDMA buffers when connection is closed 2021-10-15 23:56:22 +03:00
Vitaliy Filippov 74cb3911db Rebase children of the "inverse" child when it is removed, change /index/image/%s keys during metadata ops 2021-09-26 13:41:48 +03:00
Vitaliy Filippov d5efbbb6b9 Rename commands and add CLI help 2021-09-26 13:14:36 +03:00
Vitaliy Filippov 4319091bd3 Implement "inverse merge" optimisation 2021-09-26 12:59:04 +03:00
Vitaliy Filippov 6d307d5391 Ignore "readonly" flag when merging snapshots 2021-09-26 11:32:42 +03:00
Vitaliy Filippov 065dfef683 Rename vitastor-cmd to vitastor-cli 2021-09-26 00:52:05 +03:00
Vitaliy Filippov 4d6b85fe67 Split one big cmd.cpp into multiple files 2021-09-26 00:48:08 +03:00
Vitaliy Filippov 2dd2f29f46 Move get_inode_cfg to cli_tool_t 2021-09-25 23:36:45 +03:00
Vitaliy Filippov fc3a1e076a Fix minor bugs in snapshot removal, check it in tests 2021-09-25 19:30:29 +03:00
Vitaliy Filippov 3a3e168c42 Implement high-level snapshot flatten and remove commands 2021-09-25 01:36:44 +03:00
Vitaliy Filippov 95c55da0ad Implement merge with CAS 2021-08-01 20:06:05 +03:00
Vitaliy Filippov 5cf1157f16 Return real version on CAS failure 2021-08-01 20:05:19 +03:00
Vitaliy Filippov acf637950c Implement layer merge
A new command merges multiple snapshot/clone layers into one of them,
so merged layers can be deleted after this procedure
2021-07-31 00:23:30 +03:00
Vitaliy Filippov a02b02eb04 Use new listing methods in rm_inode 2021-07-20 00:19:34 +03:00
Vitaliy Filippov 7d3d696110 Implement object listing with controllable parallelism in cluster_client 2021-07-20 00:19:34 +03:00
Vitaliy Filippov 712576ca75
Merge pull request #13 from lnsyyj/wip-vitastor-debug
fix BLOCKSTORE_DEBUG, error: ‘dirty_it’ was not declared in this scope
2021-07-18 01:25:05 +03:00
Vitaliy Filippov 28bd94d2c2 Make diagnostics slightly better 2021-07-18 01:24:38 +03:00
Vitaliy Filippov 148ff04aa8 Do not lose flusher queue entries when an "older object rescan" happens in parallel with flushing of an older version of another object 2021-07-18 01:20:54 +03:00
JiangYu e86df4a2a2 fix BLOCKSTORE_DEBUG, error: ‘dirty_it’ was not declared in this scope
Signed-off-by: JiangYu <lnsyyj@hotmail.com>
2021-07-18 00:46:05 +08:00
Vitaliy Filippov e74af9745e Print journal flusher diagnostics on slow ops 2021-07-17 16:13:41 +03:00
Vitaliy Filippov 0e0509e3da Dump op states in slow operation log 2021-07-16 01:58:50 +03:00
Vitaliy Filippov cb282d25e0 Release 0.6.5
- Basic support for OpenStack: Cinder driver, patches for Nova and libvirt
- Add missing "image" and "config_path" QEMU options
- Calculate aggregate per-pool statistics in monitor
- Implement writes with Check-And-Set semantics
- Add a C wrapper library with public header
2021-07-10 11:01:21 +03:00
Vitaliy Filippov 8b2a4c9539 Fix centos builds (yum-builddep stopped working in el7, cmake in el8..) 2021-07-10 11:01:21 +03:00
Vitaliy Filippov b66a079892 State basic OpenStack support 2021-07-10 01:11:20 +03:00
Vitaliy Filippov e90bbe6385 Implement OpenStack Cinder driver for Vitastor
It can't delete snapshots yet because Vitastor layer merge isn't
implemented yet. You can only delete volumes with all snapshots.
This will be fixed in the near future.
2021-07-10 01:06:29 +03:00
Vitaliy Filippov 4be761254c Move patches to patches/ 2021-07-09 21:51:19 +03:00
Vitaliy Filippov 7a45c5f86c buster-backports has broken mesa 2021-07-09 12:29:39 +03:00
Vitaliy Filippov bff413584d Fix qemuBlockStorageSourceGetVitastorProps 2021-07-09 02:09:47 +03:00
Vitaliy Filippov bb31050ab5 Add missing image, config_path options to QEMU QAPI 2021-07-09 02:09:47 +03:00
Vitaliy Filippov b52dd6843a Rename qemu_rbd_unescape and qemu_rbd_next_tok to *_vitastor_* 2021-07-03 23:14:44 +03:00
Vitaliy Filippov b66160a7ad Aggregate per-pool statistics in mon 2021-07-03 23:14:44 +03:00
Vitaliy Filippov 30bb602681 Add _VITASTOR to missing switches in libvirt 7.0 patch 2021-06-28 22:00:23 +03:00
Vitaliy Filippov eb0a3adafc Patch libvirt schema, add an example to test libvirt 2021-06-28 01:20:55 +03:00
Vitaliy Filippov 24301b116c Add libvirt 5.0 patch 2021-06-27 18:43:29 +03:00
Vitaliy Filippov 1d00c17d68 Add libvirt 7.5 patch 2021-06-27 10:58:12 +03:00
Vitaliy Filippov 24f19c4b80 Add libvirt 7.0 patch 2021-06-27 00:58:56 +03:00
Vitaliy Filippov dfdf5c1f9c Fix comments in mon.js 2021-06-20 00:23:56 +03:00
Vitaliy Filippov aad7792d3f Check for loops in parent inode chains 2021-06-20 00:23:03 +03:00
Vitaliy Filippov 6ca8afffe5 Add CAS version parameter to the C wrapper 2021-06-19 01:00:52 +03:00
Vitaliy Filippov 511a89948b Rework qemu_proxy into a C wrapper library with public header 2021-06-19 00:39:11 +03:00
Vitaliy Filippov 3de553ecd7 Add a test for CAS write operation 2021-06-15 00:12:35 +03:00
Vitaliy Filippov 9c45d43e74 Extract common 3 OSD code from several test scripts 2021-06-15 00:12:35 +03:00
Vitaliy Filippov 891250d355 Implement CAS writes
From now on, reads will return the server-side object version numbers
and writes and deletes will have an additional "version" parameter
which, if set to a non-zero value, will be atomically compared with
the current version of the object plus 1 and the modification will
fail if it doesn't match.

This feature opens the road to correct online flattening of snapshot
layers and other interesting things.
2021-06-15 00:12:35 +03:00
Vitaliy Filippov f9fe72d40a Release 0.6.4
- Implement a basic Kubernetes CSI driver
- Minor fixes for vitastor-nbd
- Fix build without RDMA broken in 0.6.3
2021-05-16 01:38:01 +03:00
Vitaliy Filippov 10ee4f7c1d Add notes about CSI to README 2021-05-16 01:38:01 +03:00
Vitaliy Filippov fd8244699b Implement basic CSI driver
Currently can create and remove volumes, but resizing and snapshots is not supported yet
2021-05-16 01:15:43 +03:00
Vitaliy Filippov eaac1fc5d1 Log to stderr in etcd_state_client, too 2021-05-16 01:09:25 +03:00
Vitaliy Filippov 57be1923d3 Daemonize NBD_DO_IT process, correctly cleanup unmounted NBD clients 2021-05-16 01:09:25 +03:00
Vitaliy Filippov c467acc388 Fix /v3 appendage to etcd URLs without /v3 2021-05-15 19:22:24 +03:00
Vitaliy Filippov bf591ba3ee Fix nbd module load check 2021-05-15 19:22:24 +03:00
Vitaliy Filippov 699a0fbbc7 Log to stderr instead of stdout in client 2021-05-15 19:22:24 +03:00
Vitaliy Filippov 6b2dd50f27 Fix build without RDMA 2021-05-08 18:20:43 +03:00
Vitaliy Filippov caf2f3c56f Release 0.6.3
- RDMA support
- Client performance optimisations (4k randread ~120k -> ~180k on 1 core)
- JSON configuration file (/etc/vitastor/vitastor.conf) support
- Bug fixes
2021-05-02 17:47:43 +03:00
Vitaliy Filippov 9174f188b1 Build packages with libibverbs
For CentOS 7 it also requires newer rdma-core as CentOS 7's native version doesn't have
implicit ODP support. The updated version is already uploaded into the vitastor repo.
2021-05-02 17:47:16 +03:00
Vitaliy Filippov d3978c6d0e Do not print RDMA connection messages when log_level=0
By the way, it's 1 by default in the OSD, so these messages will still be there in OSD logs
2021-05-01 00:26:09 +03:00
Vitaliy Filippov 4a7365660d Do not wait for down OSDs during sync
Fixes a hang introduced in 0.5.11 in the non-immediate_commit mode
2021-05-01 00:26:07 +03:00
Vitaliy Filippov 818ae5d61d Some config parsing fixes 2021-05-01 00:20:01 +03:00
Vitaliy Filippov 6810e93c3f Add RDMA options to mon.js list 2021-04-30 01:23:22 +03:00
Vitaliy Filippov f6f35f4127 Pass options correctly to not override /etc/vitastor/vitastor.conf 2021-04-30 01:17:44 +03:00
Vitaliy Filippov 72aa2fd819 Make OSD and client read common configuration from /etc/vitastor/vitastor.conf 2021-04-30 01:11:27 +03:00
Vitaliy Filippov 5010b0dd75 Use json11 instead of blockstore_config_t 2021-04-30 00:52:46 +03:00
Vitaliy Filippov 483c5ab380 Negotiate max_msg instead of max_sge, make buffer settings more conservative :-) 2021-04-29 11:10:35 +03:00
Vitaliy Filippov 6a6fd6544d Add RDMA options to the QEMU driver 2021-04-29 11:02:49 +03:00
Vitaliy Filippov 971aa4ae4f Implement RDMA receive with memory copying (send remains zero-copy)
This is the simplest and, as usual, the best implementation :)

100% zero-copy implementation is also possible (see rdma-zerocopy branch),
but it requires to create A LOT of queues (~128 per client) to use QPN as a 'tag'
because of the lack of receive tags and the server may simply run out of queues.
Hardware limit is 262144 on Mellanox ConnectX-4 which amounts to only 2048
'connections' per host. And even with that amount of queues it's still less optimal
than the non-zerocopy one.

In fact, newest hardware like Mellanox ConnectX-5 does have Tag Matching
support, but it's still unsuitable for us because it doesn't support scatter/gather
(tm_caps.max_sge=1).
2021-04-29 02:34:45 +03:00
Vitaliy Filippov 9e6cbc6ebc Negotiate max_sge between RDMA client & server 2021-04-29 02:15:20 +03:00
Vitaliy Filippov ce777319c3 WIP RDMA support
Basic naive implementation works, but it's highly non-optimal as
RNR retransmissions occur all the time. RDMA expects the receiver
to always have place for incoming WRs...
2021-04-29 02:03:54 +03:00
Vitaliy Filippov f8ff39b0ab Rework continue_ops() to remove a CPU hot spot
This rework increases fio -rw=randread -iodepth=128 result from ~120k to ~180k iops :)
2021-04-29 01:50:13 +03:00
Vitaliy Filippov d749159585 Linked list experiment
Rework client operation queue from a vector to a linked list.
This is required to rework continue_ops() as its current implementation
consumes ~25% of client process CPU.
2021-04-29 01:47:33 +03:00
Vitaliy Filippov 9703773a63 Fix has_flushes setting 2021-04-28 23:40:44 +03:00
Vitaliy Filippov 5d8d486f7c Add SOVERSION 2021-04-20 01:01:32 +03:00
Vitaliy Filippov 2b546cdd55 Link vitastor_blk with vitastor_common for timerfd_manager_t
Not really required to operate, but fixes a verify-elf error
2021-04-20 00:51:53 +03:00
Vitaliy Filippov bd7b177707 Report sensitive configuration values instead of the configuration source 2021-04-17 23:11:16 +03:00
Vitaliy Filippov 33f9d03d22 Update documentation regarding image names and vitastor-nbd 2021-04-17 17:40:12 +03:00
Vitaliy Filippov 82e6aff17b Support mapping NBD by the image name 2021-04-17 17:39:55 +03:00
Vitaliy Filippov 57e2c503f7 Rename osd_t::c_cli to msgr 2021-04-17 16:32:09 +03:00
Vitaliy Filippov 715bc8d53d Release 0.6.2
- Fix a possible crash during SYNC when journal fsyncs are enabled
- Fix a memory leak in the chained read implementation
2021-04-15 23:40:06 +03:00
Vitaliy Filippov 0af077701c Fix a possible crash during SYNC when journal fsyncs are enabled 2021-04-15 02:01:50 +03:00
Vitaliy Filippov cac976ce25 Fix a memory leak in the chained read implementation 2021-04-15 01:42:18 +03:00
Vitaliy Filippov acf0646542 Build common sources once 2021-04-15 01:13:34 +03:00
Vitaliy Filippov ede1c1d667 Release 0.6.1
A bugfix for the new "chained read from snapshot" feature
2021-04-14 22:32:23 +03:00
Vitaliy Filippov 38bd51c97f Remove aio_context assertion, it seems it is unneeded 2021-04-14 22:32:15 +03:00
Vitaliy Filippov 8c9f32cd45 Add run_vm test bash scripts 2021-04-13 16:21:21 +03:00
Vitaliy Filippov 966fb763ca Oooops, fix chained reads 2021-04-13 16:19:21 +03:00
Vitaliy Filippov 0b41ffc08d Release 0.6.0
Warning: upgrading from 0.5.x is currently not supported!
Please create an issue if you really need upgrade capability.

New features:
- Snapshots and Copy-on-Write clones
- Inode (image) names
- Inode I/O and space statistics
- Write throttling for smoothing random write workloads in SSD+HDD configurations
2021-04-11 00:49:18 +03:00
Vitaliy Filippov 64eeb79051 Prevent 0.6.x OSDs from talking to 0.5.x
The new protocol is almost compatible - it has bitmaps, but also it has
a "bitmap_length" field. It's not hard to make 0.5-0.6 OSDs and clients
compatible, but for now I just assume nobody needs it.

If I'm wrong and anybody requests to upgrade their production 0.5.x system
to 0.6.x I'll fix it.
2021-04-10 22:26:17 +03:00
Vitaliy Filippov 2a02f3c4c7 Add metadata superblock and check it on start
Refuse to start if the superblock is missing or bad version;
zero out the metadata area when initializing superblock.
2021-04-10 22:26:17 +03:00
Vitaliy Filippov f684d9101a Refuse to start with old journal version 2021-04-10 17:44:12 +03:00
Vitaliy Filippov c72fddd714 Notes about master/0.5.x 2021-04-10 17:44:12 +03:00
Vitaliy Filippov a1f2f19489 Do not increment inode statistics if the object already exists 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 82c1a7ec67 Fix statistics reporting, split inode number into pool & inode 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 2ab423d4ef Implement journaled write throttling for the SSD+HDD case 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 4694811eab Add microsecond accuracy to set_timer 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 6b988de17d Remove timerfd_interval 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 37efdc2a83 Fix bitmap_set for replicated pools 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 591cad09c9 Fix bitmaps for objects larger than 128K 2021-04-10 17:44:12 +03:00
Vitaliy Filippov b907ad50aa Oops, forgot to add external bitmaps to blockstore in some places 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 7308d6a6c0 Note about etcd 3.4.15 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 5f5b6ef150 Enable chained reads in the client 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 38a3df4a0e Implement chained (optimized) read in the primary OSD code 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 6950b8e3a0 Watch inode metadata revisions 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 0cea3576fb Add "read bitmaps" operation to secondary OSD protocol 2021-04-10 17:44:12 +03:00
Vitaliy Filippov f01eea07d3 Add simplified interface to read blockstore bitmaps synchronously 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 2c2f08aca2 Shorten some structure names 2021-04-10 17:44:12 +03:00
Vitaliy Filippov d6524670e1 Introduce data distribution locality 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 879ecfa74d Fix wording 2021-04-10 17:44:12 +03:00
Vitaliy Filippov aea2d19d35 Change Telegram chat link 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 04f86dc00b Fix Russian README for CMake build 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 7aeb2cbac7 Capture all by value in qemu_proxy 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 519f081006 Add LICENSE 2021-04-10 17:44:12 +03:00
Vitaliy Filippov e50f703e1d Add Russian version of the README 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 2612d3198a Introduce image names and metadata storage in etcd
Each inode has: image name, parent inode number & pool, size and readonly flag

Snapshots are created by switching image name to a different inode number
while using the older inode as parent.
2021-04-10 17:44:12 +03:00
Vitaliy Filippov ab39ce2bbb Use clean_entry_bitmap_size instead of entry_attr_size back because of changed bitmap handling 2021-04-10 17:44:12 +03:00
Vitaliy Filippov d0c2e31312 Add a test for snapshots, fix bugs. Now the test passes 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 9038d42327 Fix several snapshot I/O bugs 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 691f066055 Actual snapshot support (untested) 2021-04-10 17:44:12 +03:00
Vitaliy Filippov ffe1cd4c79 Report inode I/O statistics, aggregate it in the monitor 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 4ae1b84c67 Report inode space usage statistics to etcd, aggregate it in the monitor 2021-04-10 17:44:12 +03:00
Vitaliy Filippov c35963967f Add inode space usage statistics tracking to blockstore 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 0aa2dd2890 Send bitmaps with primary-reads, actually read bitmaps for READ ops 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 6bf88883ac Allocate bitmaps along with stripes to avoid memory fragmentation 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 004f265393 Remove cryptic bitmap inlining from bs_op_t and osd_op_t, use bitmap in primary OSD code 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 860ac24762 Add "external" bitmap support to the secondary OSD protocol 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 6107a4d07b Add "external" bitmap support to blockstore 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 95c29b9dc3 Add "external" bitmap support to osd_rmw 2021-04-10 17:44:12 +03:00
Vitaliy Filippov d99407dcec Check QEMU block-vitastor.so during the test 2021-04-10 17:44:12 +03:00
Vitaliy Filippov 6909807068 Allow to start the OSD just to flush the journal completely 2021-04-10 17:44:12 +03:00
Vitaliy Filippov ec90fe6ec1 Release 0.5.13
Another followup to 0.5.11
2021-04-09 12:10:16 +03:00
Vitaliy Filippov 18c72f4835 Correct reenterability fix (now verified with a test)
It's rather funny but 0.5.12 has to be re-published again
2021-04-09 12:10:16 +03:00
Vitaliy Filippov 59fbcef734 Release 0.5.12
Fix qemu driver broken in 0.5.11 :)
2021-04-08 15:47:18 +03:00
Vitaliy Filippov 40b7c21fb1 Followup to 307c1731c1 - fix mark_stable 2021-04-08 15:47:18 +03:00
Vitaliy Filippov efb3678606 Fix qemu-img broken in 0.5.11
Caused by the lack of reenterability of the main cluster_client function
2021-04-08 14:59:20 +03:00
Vitaliy Filippov 462650134e Release 0.5.11
Another bunch of fixes, including important ones. Now OSDs are stable in SSD+HDD
configurations and everything is mostly ready for the merge of master branch.

Features:

- Add min_flusher_count configuration (good for HDDs)
- Shuffle PGs for better data device utilisation
- Make OSDs benefit from the immediate_commit=small setting if it's applicable

Bug fixes:

- Rework client code to fix write ordering during operation replay
- Rework error handling code so OSDs don't crash in reaction to a crash of their peer OSDs
- Fix several block layer problems related to the journal, some of which
  were leading to double allocations of the same block during journal replay
- Fix monitors crashing during the removal of OSD keys from etcd
- Fix data fsyncs being incorrectly disabled when only disable_journal_fsync was set
- Always zero out unused part of request/reply headers
- Fix some theoretically possible read/write ordering issues
- Don't try to "recover" misplaced objects if it would make them degraded
- Fix heartbeats sometimes preventing OSD to establish connections
2021-04-08 01:18:46 +03:00
Vitaliy Filippov 8d87e32175 Fix msgr_op.h includes 2021-04-08 01:18:46 +03:00
Vitaliy Filippov b0b2e7df3c Fix use-after-free in keepalive_timer and rework stop_client()
The bug reproduced if fio was temporarily stopped with SIGSTOP
during write test and then resumed after 10 seconds. In this case
"pings" were failed for all clients and fio process crashed with
'use-after-free' in keepalive_timer. It happened because it called
stop_client while having a live iterator to the map.
2021-04-07 11:06:31 +03:00
Vitaliy Filippov 97efb9e299 Do not crash on PG re-peering events when operations are in progress 2021-04-07 11:06:31 +03:00
Vitaliy Filippov f6d705383a Fix client connection recovery bugs, add dirty_ops limit 2021-04-07 11:06:31 +03:00
Vitaliy Filippov 68567c0e1f Fix messenger possibly trying to connect to the same OSD twice 2021-04-07 01:30:38 +03:00
Vitaliy Filippov 04b00003e9 Log ping failures 2021-04-07 01:30:38 +03:00
Vitaliy Filippov 307c1731c1 Forget all dirty_entries before stable big_write or delete during initialisation
This fixes a 'double_alloc' assertion in the following case:
- big_write object #1 v1 to block #100
- big_write object #1 v2 to block #101
- big_write object #2 v1 to block #100
2021-04-07 01:30:38 +03:00
Vitaliy Filippov 75a6a556b5 Shuffle PGs for better data device utilisation 2021-04-07 01:30:38 +03:00
Vitaliy Filippov a48e2bbf18 Fix write replay ordering when immediate_commit != all
Previous implementation didn't respect write ordering and could lead
to corrupted data when restarting writes after an OSD outage

Also rework cluster_client queueing logic and add tests for it to verify the correct behaviour
2021-04-03 14:51:52 +03:00
Vitaliy Filippov 688821665a Remove stoull_full() from etcd_state_client.cpp 2021-04-03 14:36:04 +03:00
Vitaliy Filippov 3e162d95a0 Remove http_client.h include from etcd_state_client.h 2021-04-03 14:36:04 +03:00
Vitaliy Filippov 829381b335 Extract some definitions to msgr_op.{cpp,h} 2021-04-03 14:36:04 +03:00
Vitaliy Filippov 54f2353f24 Use bitmap granularity for alignment checks 2021-04-03 14:36:04 +03:00
Vitaliy Filippov e47f6fba60 Remove cluster_client_t::stop() 2021-04-03 14:35:42 +03:00
Vitaliy Filippov 883bf84a16 Fix build 2021-04-03 01:47:15 +03:00
Vitaliy Filippov 52097c4856 Stop flushing when less than min_flusher_count operations are available (unless a trim is forced) 2021-04-03 00:53:28 +03:00
Vitaliy Filippov e1355cbc74 Report failed operation name in cluster_client 2021-04-03 00:53:28 +03:00
Vitaliy Filippov 8f8b90be7a Add min_flusher_count configuration 2021-04-03 00:53:28 +03:00
Vitaliy Filippov ad9f619370 Skip double allocs when reading journal 2021-04-03 00:53:28 +03:00
Vitaliy Filippov f4769ba7c7 Collapse create+delete journal entry pairs if they're already flushed
Old journal replay mechanism could lead to a double allocation of the same
block and a "Fatal error: tried to overwrite non-zero metadata entry"
2021-04-03 00:53:28 +03:00
Vitaliy Filippov 843b7052d2 Add an assertion when clearing deleted metadata entries, add debug details when freeing blocks 2021-04-03 00:53:28 +03:00
Vitaliy Filippov df99e232ee Deduplicate osd_sets in pg history + raise request size limit for etcd 2021-04-03 00:53:28 +03:00
Vitaliy Filippov 3a40fa4127 Fix monitor errors in case of OSD removal 2021-03-27 01:15:18 +03:00
Vitaliy Filippov 4095bcc558 Do not ignore object deletion journal entries when they are preceded by a big write 2021-03-25 11:00:10 +03:00
Vitaliy Filippov 564d64e271 Add some details for debug prints 2021-03-25 11:00:10 +03:00
Vitaliy Filippov cf54741c95 Followup to 05db1308aa
Don't do anything with the object state after errors because
it's freed by PG re-peer in this case
2021-03-25 11:00:10 +03:00
Vitaliy Filippov 18a5fafa2a Fix rollback 2021-03-25 02:41:58 +03:00
Vitaliy Filippov 06f4978085 Fix fsync check in blockstore_flush (data fsyncs were disabled instead of journal fsyncs) 2021-03-25 02:41:58 +03:00
Vitaliy Filippov 7ebf1588c5 Check for immediate_commit==small in the OSD code 2021-03-25 02:41:58 +03:00
Vitaliy Filippov b0ad1e1e6d Remember writes as "unsynced" only after completing them
Previously BS_OP_SYNC could take unfinished writes and add them into the journal before
they were actually completed. This was leading to crashes with the message
"BUG: Unexpected dirty_entry 2000000000001:9f2a0000 v3 unstable state during flush: 338"
2021-03-25 02:41:58 +03:00
Vitaliy Filippov 0949f08407 Extract osd_primary write and sync code into separate files 2021-03-24 14:20:56 +03:00
Vitaliy Filippov 04a1f18fa5 Assign .req as a whole to always zero out the remaining part
Also clear .reply before processing the operation
2021-03-24 14:20:56 +03:00
Vitaliy Filippov cf9a641d66 Skip disconnected OSDs during sync 2021-03-24 14:20:56 +03:00
Vitaliy Filippov 05db1308aa Fix two potential read/write ordering problems (even though not yet seen in tests)
- Write operations could be 'stabilized' and previous versions could be
  purged from OSDs before the removal of version_override and following
  reads could potentially hit different version in EC pools
- Object was marked clean after completing the delete during recovery, so
  reads could in theory hit a deleted version and return nothing
2021-03-24 14:20:56 +03:00
Vitaliy Filippov 98b54ca948 Don't try to "recover" misplaced objects if it would make them degraded 2021-03-21 01:37:23 +03:00
Vitaliy Filippov 23225c5e62 Do not run ping on clients that are not yet connected 2021-03-21 01:37:23 +03:00
Vitaliy Filippov 7e6e1a5a82 Release 0.5.10
The version seems to be stable after this bunch of fixes :)

- Fix delete & write operation ordering during rebalance to not lose objects in the immediate_commit=off mode
- Fix a possible crash caused by very high iodepths
- Re-distribute PG primaries over OSDs that come up after a short downtime
- Allow to specify etcd URLs for OSDs with http://, do not die with a strange error if -etcd option is missing for fio
- Fix a journal flushing deadlock which sometimes occurred in the immediate_commit=off mode
- Fix a bug where OSDs could hang if the data device filled up
- Fix an allocator bug where it was unable to allocate up to last (n%64) data device blocks
- Fix monitor crash that occurred on removal of some etcd keys
- Fix a bug where PGs could remain incomplete due to incorrect PG history with just zeroes in osd_sets
2021-03-16 12:48:26 +03:00
Vitaliy Filippov 435045751d Delete objects only after a SYNC during rebalance in the non-immediate_commit mode
Previously OSDs could commit deletes before writes during recovery or rebalance
in the "lazy fsync" (immediate_commit=off) mode which could result in lost objects
2021-03-16 12:48:26 +03:00
Vitaliy Filippov c5fb1d5987 Do not duplicate blockstore operations when io_uring fills up
This bug was leading to OSDs dying with "Assertion `fulfilled == read_op->len' failed"
when testing fio -rw=randread -numjobs=8 -iodepth=128
2021-03-16 12:48:26 +03:00
Vitaliy Filippov 9f59381bea Re-distribute PG primaries over OSDs that come up after a short downtime 2021-03-16 12:48:26 +03:00
Vitaliy Filippov 9ac7e75178 Allow to specify etcd URLs for OSDs with http://, do not die with a strange error if -etcd option is missing for fio 2021-03-16 12:48:26 +03:00
Vitaliy Filippov 88671cf745 Fix a bug causing all flushers to wait for an fsync without actually trying to do it
This happened because flusher_count became dynamic and fsync_batch() was comparing the number
of flushers currently ready to do an fsync with the maximum number of flushers. Also the number
wasn't rechecked on every loop which was also incorrect.

Now the interrupted_rebalance test passes even without IMMEDIATE_COMMIT=1.
2021-03-13 17:27:29 +03:00
Vitaliy Filippov fe1749c427 Fix the multiple_interrupted_rebalance test 2021-03-13 17:19:45 +03:00
Vitaliy Filippov ceb9c28de7 Set default log_level before passing config to etcd_state_client 2021-03-13 17:19:45 +03:00
Vitaliy Filippov 299d7d7c95 Use common macro for get_sqe 2021-03-13 17:19:45 +03:00
Vitaliy Filippov d1526b415f Correctly resume writes when OSD is full to return an error 2021-03-13 17:19:45 +03:00
Vitaliy Filippov f49fd53d55 Fix a bug where allocator was unable to allocate up to last (n%64) blocks, add tests for it 2021-03-13 02:19:02 +03:00
Vitaliy Filippov dd76eda5e5 Test multiple interrupted rebalancings
Currently only passes with immediate_commit=all configuration
(env variable IMMEDIATE_COMMIT=1 for the bash script)
2021-03-12 12:55:44 +03:00
Vitaliy Filippov 87dbd8fa57 Use empty hash as the default value for some etcd keys in the monitor 2021-03-12 12:40:15 +03:00
Vitaliy Filippov b44f49aab2 Ignore zero OSDs in history osd_sets 2021-03-12 12:40:15 +03:00
Vitaliy Filippov 036555638e Release 0.5.9
- Fix two monitor bugs which led to objects being "logically lost" (physically
  present on some secondary OSDs while primary doesn't know about it) after multiple
  interrupted rebalancings
- Implement "no_recovery" and "no_rebalance" flags
2021-03-11 00:39:10 +03:00
Vitaliy Filippov af5155fcd9 Implement "no_recovery" and "no_rebalance" flags 2021-03-11 00:36:31 +03:00
Vitaliy Filippov 0d2efbecc9 Preserve previous PG history when changing PG distribution
Fixes incorrect PG history in case when a new rebalance is started
before the finish of the previous one which could make primary OSDs unable
to locate some objects on some secondaries.
2021-03-11 00:16:10 +03:00
Vitaliy Filippov e62e8b6bae Use real pg configuration instead of the "last clean" one for generating PG history
Basically fixes the bug introduced in 0.5.7 where an rebalance interrupted
by the monitor could result in forgetting objects moved to the new place
2021-03-10 02:01:44 +03:00
Vitaliy Filippov c4ba24c305 Do not print ping op latency 2021-03-10 02:01:44 +03:00
Vitaliy Filippov 19e47a0279 Release 0.5.8
- Add heartbeats (fixes failover in case of network issues or offline nodes)
- Fix a bug where a PG could incorrectly become listed as 'incomplete' if historical osd_sets
  included a set with the the PG's primary OSD as the only alive one
- Use osd_out_time = 10 minutes by default instead of 30 minutes
- Make monitors stick to a single selected etcd URL on start and not try to select random ones
  on every request - this was leading to etcd interaction errors when some etcds were unavailable
2020-03-09 02:38:17 +03:00
Vitaliy Filippov bd178ac20f Fix history osd_set check - local OSD is always available! 2021-03-09 02:18:18 +03:00
Vitaliy Filippov 7006875a24 Make monitor stick to one etcd until the restart 2021-03-09 02:15:38 +03:00
Vitaliy Filippov ad577c4aac Add PING operation and timeouts to detect OSD failures when a host goes down 2021-03-09 02:15:38 +03:00
Vitaliy Filippov 836635c518 Use osd_out_time = 10 minutes by default 2021-03-09 02:15:38 +03:00
Vitaliy Filippov 88a03f4e98 Release 0.5.7
- Fix multiple bugs leading to OSDs sometimes being unable to correctly activate PGs
  when a lot of PG peering events occurred in a small amount of time
- Fix a bug where OSDs could list incomplete object versions during peering. The bug
  manifested with "local rollback operation failed" messages in OSD logs
- Fix a bug where misplaced chunks for degraded and incomplete objects were not removed
  from extra OSDs during recovery
- Fix incorrect PG history configuration resulting in OSDs being unable to find some
  of the objects after a PG count change
- Simplify block layer write ordering logic
- Avoid extra data move when a lot of OSDs are first stopped for long time and then restarted
- Fix incorrect degraded & misplaced object statistics after a completed rebalance
- Fix incorrect usage of pg_minsize instead of the minimal possible object chunk count in EC pools
2021-03-08 23:37:02 +03:00
Vitaliy Filippov 2a5036669d Fix PG count change procedure
In previous versions PG histories were calculated incorrectly during
PG count change which led to objects being lost on OSDs not in PG's osd set.
2021-03-08 23:15:58 +03:00
Vitaliy Filippov 2e0c853180 Make test_change_pg_count check if any objects are lost during the test 2021-03-08 23:15:07 +03:00
Vitaliy Filippov e91ff2a9ec Only forget offline PGs if their state is not changed during reporting 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 086667f568 Do not check PG state key ownership if it doesn't exist yet
This fixes the bug where OSDs were sometimes trying to report updated PG states
infinitely without luck when PGs transitioned from 'starting' to 'peering' too fast
2021-03-08 17:04:10 +03:00
Vitaliy Filippov 73ce20e246 Add a test for the "reappear after move" case 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 1be94da437 Check & remove extra chunks for degraded / incomplete objects, too 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 80e12358a2 Use pg_data_size instead of pg_minsize for object state calculation 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 36c935ace6 Use std::vector for the blockstore submission queue 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 0d8b5e2ef9 Remove unused enqueue_op_first() 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 98f1e2c277 Rework write/sync ordering
Make syncs wait for all previous writes because it's the only way
to make sure that OSDs do not receive incomplete writes in LIST results
during peering when some writes are still in progress.

Also simplify blockstore submission queue logic.
2021-03-08 17:04:10 +03:00
Vitaliy Filippov 21e7686037 Fix possible "assertion failed: pg.inflight >= 0" error during PG stop 2021-03-08 17:04:10 +03:00
Vitaliy Filippov ab21a1908b Check for the dirty PG flag when trying to continue to stop it after sync 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 30d1ccd43e Fix an infinite loop when discarding list operations during stop_pg() 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 8bdd6d8d78 Reset PG state when stopping them 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 09b3e4e789 Fix OSDs being unable to stop PGs that are 'peering', not 'active'
This was sometimes leading to incorrect misplaced and degraded object count statistics
2021-03-08 17:04:10 +03:00
Vitaliy Filippov 07912fd670 Use history/last_clean_pgs to avoid extra data move when observing a series of changes in the cluster 2021-03-08 17:04:10 +03:00
Vitaliy Filippov bc742ccf8c Fix a small memory leak in etcd_state_client 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 314b20437b Do not break subsequent small writes badly when a big write is canceled 2021-03-08 17:04:10 +03:00
Vitaliy Filippov 29bac892ad Add .gitignore 2021-03-08 17:04:10 +03:00
Vitaliy Filippov cf7547faf3 Fix *.sh build scripts 2021-03-02 02:17:11 +03:00
Vitaliy Filippov ab90ed747f Release 0.5.6
- Fix operation statistics
- Fix a rebalance hang introduced in 0.5.5
- Test PG count changes with actual data moving
- Fix a possible 'unexpected pg state: 0' error during PG count change
2021-03-01 16:26:04 +03:00
Vitaliy Filippov 29d8ac8b1b Do not report statistics for the empty operation 2021-03-01 16:20:57 +03:00
Vitaliy Filippov 97795ea1b1 Use pg_minsize=2 in the pg_count change test
Also don't check for has_degraded because it's not a bug that objects
are _temporarily_ listed as degraded during PG peering as it's not
required for the new primary to connect to _all_ older peers to start
peering. The test may be improved in the future by temporarily disabling
degraded recovery during it and returning the has_degraded check back.
2021-03-01 16:18:08 +03:00
Vitaliy Filippov 24e7075f08 Fix monitor's statistics aggregation 2021-02-28 19:51:16 +03:00
Vitaliy Filippov 6155b23a7e Replace pgs[id] with pgs.at(id) to prevent accidental auto-vivification 2021-02-28 19:36:59 +03:00
Vitaliy Filippov 7d49706c07 Improve the pg_count change test: add more OSDs and actually move data between them 2021-02-28 19:36:59 +03:00
Vitaliy Filippov 46e79f3306 Wait for PGs to become clean before stopping them 2021-02-28 19:36:59 +03:00
Vitaliy Filippov 41fd14e024 Fix deletes not increasing write_iodepth 2021-02-28 19:36:59 +03:00
Vitaliy Filippov bb2d9a3afe Release 0.5.5
- Transition to CMake build system
- Fix Monitor being unable to change PG sizes
- Fix PG optimizer not using some OSDs in some cases
- Fix inability to change PG count online
- Improve journal flusher performance
- Add a little better systemd unit generator
- Use w=8 with jerasure (breaking change for EC pools)
2021-02-26 01:59:18 +03:00
Vitaliy Filippov e899ed2c25 Make OSDs with 256 flushers (as they are now dynamic) 2021-02-26 01:59:18 +03:00
Vitaliy Filippov e21b14b72c Fix rpm specs for building with CMake 2021-02-26 01:59:18 +03:00
Vitaliy Filippov 5af8eddaa9 Add the remaining build script for Debian 2021-02-26 01:59:18 +03:00
Vitaliy Filippov 4f5a94c07a Modify instructions for the CMake build 2021-02-26 00:28:57 +03:00
Vitaliy Filippov e16b87ecc8 Rename random_combinations() parameter from "unordered" to "ordered" as it's more correct 2021-02-25 23:59:34 +03:00
Vitaliy Filippov fcb4aa0a11 Fix Monitor being unable to change PG sizes 2021-02-25 23:59:34 +03:00
Vitaliy Filippov 12adfa470c Add a test for changing PG size 2021-02-25 23:59:33 +03:00
Vitaliy Filippov 7f15e0c084 Add a simple test for the PG optimizer 2021-02-25 23:59:33 +03:00
Vitaliy Filippov 08d4bef419 Fix PG optimizer removing PGs without adding new ones
This happened when the distribution was already valid for the current OSD tree,
but didn't use all OSDs. For example, OSDs 1 2 3 and all PGs equal to [ 1, 2 ]
remained unchanged.
2021-02-25 23:59:33 +03:00
Vitaliy Filippov 2d73b19a6c Fix online PG count change bugs 2021-02-25 23:59:33 +03:00
Vitaliy Filippov 69c87009e9 Add a test for changing PG count 2021-02-25 23:59:33 +03:00
Vitaliy Filippov c974cb539c Make flusher_count adaptive and limit write iodepth 2021-02-25 23:59:33 +03:00
Vitaliy Filippov 00e98f64f3 A little better systemd unit generator 2021-02-25 23:59:33 +03:00
Vitaliy Filippov 91a70dfb1b Add a test for the no_same_sector_overwrites mode 2021-02-25 23:59:33 +03:00
Vitaliy Filippov 178388ac8c Use packages/ subdir instead of build/ for Docker package builds 2021-02-25 23:59:04 +03:00
Vitaliy Filippov bf9a175efc Move C/C++ sources to src subdirectory 2021-02-25 23:59:03 +03:00
Vitaliy Filippov 08aed962de Use CMake 2021-02-25 23:58:08 +03:00
Vitaliy Filippov 8c65e890b9 Slightly clean up the build script 2021-02-25 23:56:54 +03:00
Vitaliy Filippov 8cda70b889 Allow to enable AddressSanitizer with "ASAN=1 make" 2021-02-25 23:55:33 +03:00
Vitaliy Filippov 61ab22403a Use w=8 with jerasure 2021-02-25 23:55:33 +03:00
Vitaliy Filippov 16da663a66 Add another test for failure domains 2021-02-25 23:55:33 +03:00
Vitaliy Filippov 4a2dcf7b6b Update the license to VNPL 1.1
VNPL 1.1 is slightly reworded to make it clear that proprietary software
interacting with Vitastor and providing some kind of service to end users isn't
a "Proxy Program" if it's not specially designed to be used with Vitastor.

For example, Windows OS running in a virtual machine stored in a Vitastor
cluster clearly isn't.
2021-02-25 23:55:33 +03:00
Vitaliy Filippov 8d48cc56b0 Generate randomly permutated OSD combinations when optimizing for compressed chunks 2021-02-25 23:55:33 +03:00
Vitaliy Filippov 9f58f01425 Mirror afr.js from /vitalif/ceph-afr-calc 2021-02-25 23:55:33 +03:00
Vitaliy Filippov b9e7d31aa1 Release v0.5.4
- Fix a rare hang, more or less reproducible with very slow drives
- Fix a hang with the no_same_sector_overwrites mode
2021-02-24 01:40:30 +03:00
Vitaliy Filippov 2d9f09dcb6 Attempt forced trim when stopping an overrun flusher
Fixes a rare hang happening in the event of journal space running out without
new work to do for flushers except the current sector.
The hang could be reproduced more or less consistently with very slow drives.
2021-02-24 01:33:01 +03:00
Vitaliy Filippov 7cc59260c5 Fix no_same_sector_overwrites related bug 2021-02-23 18:50:51 +03:00
Vitaliy Filippov ca0a11ec85 Release 0.5.3 2021-02-03 00:38:57 +03:00
Vitaliy Filippov 51c0b5afee Whitelist more leaks 2021-02-02 02:05:41 +03:00
Vitaliy Filippov e1e01d042e Rename sector_info.usage_count to flush_count 2021-02-02 01:32:23 +03:00
Vitaliy Filippov 534a4a657e Rename space_check.sectors_required to sectors_to_write 2021-02-02 01:30:23 +03:00
Vitaliy Filippov 9b5d8b9ad4 Fix multiple-sector journal writes, add assertions to not miss any SQEs 2021-02-02 01:29:11 +03:00
Vitaliy Filippov e66ed47515 Clear SQEs before returning them to the caller to prevent erroneous double submissions 2021-02-02 01:26:54 +03:00
Vitaliy Filippov 036c6d4c42 Add a simple test case 2021-02-01 19:43:10 +03:00
Vitaliy Filippov 4cb79a3bf8 Allow to calculate simple-offsets for files 2021-02-01 19:43:10 +03:00
Vitaliy Filippov 3bf53754c2 Fix several I/O bugs 2021-02-01 19:43:10 +03:00
Vitaliy Filippov 6023cac361 Do not stop clients before they are connected 2021-02-01 19:31:10 +03:00
Vitaliy Filippov 915d04c446 Allow empty global configuration, report OSD statistics faster 2021-02-01 19:31:10 +03:00
Vitaliy Filippov 21e06ea40d Fix memory leaks in fio engines 2021-02-01 19:31:10 +03:00
Vitaliy Filippov 9ef7f865b0 Fix incorrect calls to prepare_journal_sector_write() when flushing multiple sectors 2021-02-01 19:31:10 +03:00
Vitaliy Filippov 9dd20a31aa Do not use pg_minsize in the client code! 2021-02-01 19:31:10 +03:00
Vitaliy Filippov 28be049909 Dump only actual part of the journal by default 2021-01-01 23:04:30 +03:00
Vitaliy Filippov 78fbaacf1f External jerasure's w into defines
In fact, w=8 looks better than w=32, so it may be changed in the future
2020-12-31 19:15:22 +03:00
Vitaliy Filippov 1526c5a213 Add lp_solve into dependencies 2020-12-31 01:32:31 +03:00
Vitaliy Filippov c7cc414c90 Skip removed descriptors in epoll (this is possible in real clusters) 2020-12-30 17:04:18 +03:00
Vitaliy Filippov f4ea313707 Fix cl->read_op being freed without calling the completion callback 2020-12-30 16:55:54 +03:00
Vitaliy Filippov b88b76f316 Parallel usage of multiple network interfaces was a sick fantasy 2020-12-30 00:05:17 +03:00
Vitaliy Filippov 4a17a61d1f Make rm_inode work with incomplete and degraded objects, allow to wait before deleting objects 2020-12-28 16:38:08 +03:00
Vitaliy Filippov ccabbbfbcb For reference: include a spec patch for building QEMU 4.2 or CentOS 7 2020-12-06 15:43:38 +03:00
Vitaliy Filippov 26dac57083 State that jerasure is now supported 2020-12-06 15:25:48 +03:00
Vitaliy Filippov 44a53d8352 Huh. Fix rpath for packages 2020-12-05 20:16:39 +03:00
Vitaliy Filippov 9d80bd2d98 Build with jerasure, split some build scripts 2020-12-05 19:02:23 +03:00
Vitaliy Filippov 322a38a144 Fix non-preserved real_pg_count leading to inability to change pools online 2020-12-04 23:46:48 +03:00
Vitaliy Filippov 1018764c91 Fix write->delete->write bugs, add & fix some debugging output 2020-12-04 23:21:58 +03:00
Vitaliy Filippov a45e0e5e67 Use custom decoding instead of just jerasure_matrix_decode()
- Cache the decoding matrix
- Don't do unnecessary erasures->erased conversion during decoding
- Avoid extra memory allocations during decoding
- Don't always reconstruct coding chunks
- Reconstruct chunks one-by-one, without overlapping ranges
2020-12-04 17:43:48 +03:00
Vitaliy Filippov 44656fbf67 Allow writes with low version numbers after a delete 2020-12-04 11:54:41 +03:00
Vitaliy Filippov 089f138e0c Allow situations where the journal contains a big_write(v1) after delete(v2) and v1 < v2
Fixes a crash in the following scenario:
- client issues a delete request (object version is at least 2)
- OSD has time to flush it to the metadata, but doesn't have time to move the journal start pointer on disk
- client overwrites the same object and it gets the version number 1 again
- OSD is restarted and sees delete(v=2), big_write(v=1) in the journal
- dirty_db sequence gets broken and OSD crashes with assert("Writes and deletes shouldn't happen at the same time")
2020-12-04 11:47:27 +03:00
Vitaliy Filippov bcc8e697f9 Delete PGs when deleting pools
(All OSD crash with "Online PG count change not allowed" if you try to delete an active pool though)
2020-12-04 11:47:27 +03:00
Vitaliy Filippov a4c46ba745 Add jerasure EC support (reed_sol_van, others are slower) (not tested yet) 2020-12-04 11:47:27 +03:00
Vitaliy Filippov 5596ad8997 Use custom QEMU build for CentOS 7 2020-12-04 11:47:05 +03:00
Vitaliy Filippov 59c29b0cee Fix RPATH for CentOS builds, add additional repos into the CentOS installation instructions 2020-12-04 11:47:04 +03:00
Vitaliy Filippov 959089b919 Enable progress_notify=true for etcd watches 2020-11-17 16:29:42 +03:00
Vitaliy Filippov d3e7749616 Final fixes for packaging 2020-11-10 23:33:07 +03:00
Vitaliy Filippov b56f8820ec Container packaging for Debian 11 Bullseye, CentOS 7 and CentOS 8 2020-11-10 00:02:53 +03:00
Vitaliy Filippov 4bd2bd48eb Build Vitastor packages, too 2020-11-09 14:41:39 +03:00
Vitaliy Filippov a3fc9f8d7d Add a Dockerfile to build patched QEMU for Debian (Buster) 2020-11-09 02:30:41 +03:00
Vitaliy Filippov 530975aed7 Make it also build with GCC 8 and on Debian Buster 2020-11-09 00:07:07 +03:00
Vitaliy Filippov 1446aad107 Simple patch for qemu-kvm .spec 2020-11-08 02:14:53 +03:00
Vitaliy Filippov 46479e2456 Add RPM build scripts for CentOS 8 2020-11-08 01:55:17 +03:00
Vitaliy Filippov e41bee72a5 Lower node.js requirement to 10.x 2020-11-08 01:54:12 +03:00
Vitaliy Filippov 2e0f223ddb Add RPM build scripts for CentOS 7 2020-11-07 01:52:10 +03:00
Vitaliy Filippov 3be7bc29d8 Make it build with QEMU 2.0, too
Also begin to work on rpms
2020-11-06 20:05:00 +03:00
Vitaliy Filippov 0c43ff9daf Add scripts to copy fio and qemu includes to the source package 2020-11-06 18:40:42 +03:00
Vitaliy Filippov 64d471cf53 Add simple Debian packaging 2020-11-06 18:40:42 +03:00
Vitaliy Filippov 809b2ad8cd Add install target 2020-11-06 01:12:22 +03:00
Vitaliy Filippov 550d4af151 Rename test.cpp to test_shit.cpp (random shit) 2020-11-06 01:12:22 +03:00
Vitaliy Filippov cf0f23ab8e Add patches for QEMU QAPI IDL 2020-11-04 23:30:51 +03:00
Vitaliy Filippov a516fefa8c Add qemu_module_dummy and qemu_stamp_xxx to qemu_driver.c 2020-11-04 23:10:29 +03:00
Vitaliy Filippov 3b7279b376 Add Ceph EC 2+1 test results 2020-11-01 14:13:35 +03:00
Vitaliy Filippov 824ea507d0 Do not try to push more segments than IOV_MAX at once as it leads to EMSGSIZE 2020-10-30 01:25:43 +03:00
Vitaliy Filippov 23ea409081 Fix "can't get SQE, will fall out of sync with EPOLLET" when overflowing the ring
OSDs shouldn't crash or hang with long iodepths anymore
2020-10-30 01:06:36 +03:00
Vitaliy Filippov 2ccb75974b Fix a rare crash caused by a stopped client still being in write_ready_clients 2020-10-30 01:04:58 +03:00
Vitaliy Filippov 6561d4e040 Validate pool ID before executing the operation
Reply -EPIPE for non-existing pools because we assume that it means
that pool config isn't loaded yet. Previously OSD crashed on such operations
2020-10-30 01:02:46 +03:00
Vitaliy Filippov 1eda7f529d Note about Linux 5.8+ 2020-10-28 19:17:22 +03:00
Vitaliy Filippov 0a174bb313 Return success for already finished rollback operations
There was a FIXME and I actually hit it during tests :)
2020-10-24 18:46:19 +03:00
Vitaliy Filippov 720985e4c7 Fix NULL rmw buffer after the latest changes and add a testcase for it 2020-10-24 18:29:19 +03:00
Vitaliy Filippov 4872f617a4 Clear connect timeout in stop_client() to stop races during disconnections 2020-10-24 10:37:16 +03:00
Vitaliy Filippov e8ac08be14 Allow to overwrite incomplete objects or parts of objects to recover them 2020-10-24 02:14:41 +03:00
Vitaliy Filippov 660c2412fb Improve debugging output for incomplete/degraded 2020-10-24 01:28:47 +03:00
Vitaliy Filippov faa5e1436f Attempt journal trim even without new flushes
This is the new guaranteed unblocking method which replaces old trims
in init and rollback, and also fixes a possible stall when just several
writes in the beginning of the journal are flushed without triggering
a subsequent trim.
2020-10-24 01:28:47 +03:00
Vitaliy Filippov 5fbe36198a Fix journal trimming
1) Update journal's used_start in memory only after updating journal superblock.
Doing the opposite is incorrect because part of the journal will be lost if writers
overwrite its old beginning.

2) Sync journal device after updating the superblock.

3) Do not trim in rollback and init because trimming there would also require
updating the superblock. And the only reason to trim in both those places was
to unblock writers. And a guaranteed unblocking method will follow in the next
commit :)
2020-10-24 01:08:33 +03:00
Vitaliy Filippov 99c45bb5ed Fix debugging output during journal loading 2020-10-24 01:08:33 +03:00
Vitaliy Filippov 701eb79422 Stabilize writes before deleting extra chunks to not stall peer journals 2020-10-23 22:45:05 +03:00
Vitaliy Filippov 220bda0667 Fix possible buffer over(under)flow when handling LIST 2020-10-23 02:17:44 +03:00
Vitaliy Filippov 1e8f0328e0 Cancel outbound operations after re-peering PGs 2020-10-22 22:54:38 +00:00
Vitaliy Filippov f011e0c675 Do not block stabilize by list and list by write 2020-10-22 22:13:40 +00:00
Vitaliy Filippov 1a694c387e Print slow ops in log 2020-10-20 23:41:23 +00:00
Vitaliy Filippov 738ad5af79 Fix infinite looping in continue_recovery_op() when pg_cancel_write_queue() is called 2020-10-20 22:23:15 +00:00
Vitaliy Filippov 9abf3c17c9 Correct fix for "Pool %u PG %u configuration is invalid" during startup
Establish watcher connection after loading PGs
2020-10-20 21:09:14 +00:00
Vitaliy Filippov d2b901aa09 Fix default auto-created failure domains 2020-10-20 21:07:40 +00:00
Vitaliy Filippov befff09370 Fix possible crash due to uninitialized ring_data_t in ringloop 2020-10-20 10:44:38 +03:00
Vitaliy Filippov d1645551d4 Implement write batching
Also fix possible race condition which could in theory lead to "command out of sync"
and a buffer overflow that could happen on incorrect server response.
2020-10-20 03:29:17 +03:00
Vitaliy Filippov 7cb561f95a Add etcd to the example service generator 2020-10-20 01:50:56 +03:00
Vitaliy Filippov ae480196e2 Add a note about etcd bug, fix simple-offsets.js cmdline 2020-10-19 17:05:45 +03:00
Vitaliy Filippov 398c86f943 Improve PG-related log messages 2020-10-18 12:17:22 +00:00
Vitaliy Filippov bec5f921a6 Fix buffer overflows in the no_same_sector_overwrites mode 2020-10-17 23:30:16 +00:00
Vitaliy Filippov 5335c8de8e Do not use unordered_map for list_ops/list_results 2020-10-17 23:30:16 +00:00
Vitaliy Filippov c696a82083 Replace assert with if + error message (may happen on metadata corruption) 2020-10-17 23:30:16 +00:00
Vitaliy Filippov 900171586b XOR 2+1 test results 2020-10-17 14:58:08 +03:00
Vitaliy Filippov 70612e5df0 Do not handle change events before loading config 2020-10-17 11:18:39 +00:00
Vitaliy Filippov d952c24979 Use timeout in rw callback 2020-10-17 11:00:55 +00:00
Vitaliy Filippov 776fe954a5 Fix crashes on multiple OSD reconnects
Identify clients by pointers instead of peer_fd as peer may be dropped
and reconnected between callbacks

Yeah maybe I need some Rust, but ... maybe in the future :)
2020-10-17 10:53:04 +00:00
Vitaliy Filippov 9350656af6 Fix osd tags 2020-10-16 23:28:48 +00:00
Vitaliy Filippov ece14a7d65 Hide "Connected with..." client messages by default 2020-10-11 02:22:46 +03:00
Vitaliy Filippov be5f314c32 Change notes about gcc requirement to 9+, fio to 3.16+ 2020-10-11 02:00:39 +03:00
Vitaliy Filippov 15dba96375 Implement inode removal tool. Removes multiple objects from multiple OSDs in parallel 2020-10-10 01:08:19 +03:00
Vitaliy Filippov 3d05aa9362 Make it build with GCC 10, fio 3.20+ (atomics...) and QEMU 5.1 2020-10-06 02:35:11 +03:00
Vitaliy Filippov 94efb54feb Implement OSD tags (device classes), fix pool failure_domain configuration 2020-10-04 17:31:50 +03:00
Vitaliy Filippov aa2a0ee00f Do not group adjacent stripes by default as it's pointless on SSDs 2020-10-02 10:17:54 +03:00
Vitaliy Filippov 9f2a948712 Make pg_stripe_size a per-pool config 2020-10-01 18:51:49 +03:00
Vitaliy Filippov ba74eece4a More fixes to the failure model (why am I doing this?..) 2020-10-01 18:38:30 +03:00
Vitaliy Filippov 2fdd8a1b38 More correct failure model (I hope so) 2020-10-01 02:33:48 +03:00
Vitaliy Filippov 526983f7a9 Add usable CLI commands for NBD proxy (map/unmap/list) 2020-09-29 02:06:19 +03:00
Vitaliy Filippov 8e36f04482 One more experiment with cluster AFR% 2020-09-27 19:42:42 +03:00
Vitaliy Filippov f460d8c1c8 Add note about NBD 2020-09-26 00:11:55 +03:00
Vitaliy Filippov 7619a789c0 Set request size in NBD 2020-09-26 00:01:23 +03:00
Vitaliy Filippov e65a28e27e Implement a simple NBD proxy (does not daemonize yet) 2020-09-25 20:51:01 +03:00
Vitaliy Filippov 6852f299ae Add functions to calculate AFR for a cluster 2020-09-24 23:15:26 +03:00
Vitaliy Filippov 1967269c13 Resume operations in cluster_client when PGs are loaded (fixes a hang in qemu-img) 2020-09-20 01:50:19 +03:00
Vitaliy Filippov 7574183ba6 Make qemu driver build with QEMU 3.x 2020-09-20 01:50:19 +03:00
Vitaliy Filippov 108cd6312d Correct some typos in README, add note about qemu-img 2020-09-20 01:50:19 +03:00
Vitaliy Filippov 588b9e6393 Add README 2020-09-17 23:07:50 +03:00
Vitaliy Filippov 0471b09b9c Add license notices to all source code files 2020-09-17 23:07:06 +03:00
Vitaliy Filippov ef911555ed Add cpp-btree and json11 submodules 2020-09-17 23:07:06 +03:00
Vitaliy Filippov 9d20839a02 Add license texts 2020-09-17 23:07:06 +03:00
Vitaliy Filippov 67a2e5640c Fix a GIANT memory leak on read :D 2020-09-17 00:45:59 +03:00
Vitaliy Filippov 28a0f08ce7 Add a very simple tool for calculating device offsets 2020-09-17 00:45:59 +03:00
Vitaliy Filippov 9b4e5b64ae Move monitor to mon/ 2020-09-16 02:15:26 +03:00
Vitaliy Filippov 4ca2eeafff Prefer data OSDs for EC/XOR because they can actually read something locally 2020-09-16 01:34:18 +03:00
Vitaliy Filippov 79156e0ee1 Add test systemd unit generation script 2020-09-13 12:50:15 +03:00
Vitaliy Filippov ed26c33f85 React to down OSDs instantly, set timer to recheck PGs after <osd_out_time> 2020-09-13 12:23:18 +03:00
Vitaliy Filippov 18692517be Increase receive_buffer_size 2020-09-13 00:39:20 +03:00
Vitaliy Filippov de6919b02b Add option to disable multiple overwrites of the same journal sector
This makes sense for some SSDs like Intel D3-4510 because they don't
like overwrites of the same sector:

$ fio -direct=1 -rw=write -bs=4k -size=4k -loops=100000 -iodepth=1
  write: IOPS=3142, BW=12.3MiB/s (12.9MB/s)(97.9MiB/7977msec)

$ fio -direct=1 -rw=write -bs=4k -size=128k -loops=100000 -iodepth=1
  write: IOPS=20.8k, BW=81.4MiB/s (85.3MB/s)(543MiB/6675msec)
2020-09-13 00:37:39 +03:00
Vitaliy Filippov 8f9f438e25 Allow zero reweights, fix changing pgs 2020-09-11 23:59:30 +03:00
Vitaliy Filippov db4b82089e connecting=true was also forgotten 2020-09-11 19:51:17 +03:00
Vitaliy Filippov faa871090f Do not die in mon on bad JSON in etcd 2020-09-11 19:25:52 +03:00
Vitaliy Filippov 49ec8c7c63 Add --verbose 1 flag for mon 2020-09-11 18:49:07 +03:00
Vitaliy Filippov eadd454992 Fix etcd key regexps 2020-09-11 18:33:49 +03:00
Vitaliy Filippov a15bd23ebd Missed a bad PG key 2020-09-11 17:56:18 +03:00
Vitaliy Filippov e3f502b466 Oops, I forgot a file 2020-09-11 17:49:44 +03:00
Vitaliy Filippov 6e72cf2732 Disable stdout/stderr buffering 2020-09-11 16:52:51 +03:00
Vitaliy Filippov 53832d184a Allow to use lazy sync with replicated pools 2020-09-06 12:08:44 +03:00
Vitaliy Filippov 352caeba14 Fix one more bug with replicated reads 2020-09-06 02:27:44 +03:00
Vitaliy Filippov fb533991b7 "Lock" retried objects from other flushers when accounting for overruns
Fixes a rare 100% CPU consuming hang
2020-09-06 02:19:36 +03:00
Vitaliy Filippov 73e26dbbea Add up_wait_retry_interval to config and fix it so it actually works 2020-09-05 22:05:21 +03:00
Vitaliy Filippov 44973e7f27 Fix replicated pool bugs 2020-09-05 21:45:04 +03:00
Vitaliy Filippov 242d9a42a2 Change object format in prints to %lx:%lx v%lu 2020-09-05 17:44:05 +03:00
Vitaliy Filippov 68c3e96e46 Add pool setting to fio and qemu drivers 2020-09-05 17:44:00 +03:00
Vitaliy Filippov cc4714a3a7 Basic fixes for the Monitor 2020-09-05 02:14:43 +03:00
Vitaliy Filippov e051db5a73 Check for unsuccessful memory allocations 2020-09-05 01:42:11 +03:00
Vitaliy Filippov 4f9b5286a0 Add replicated pool support to OSD logic
...in theory :-D now it needs some testing
2020-09-05 01:42:11 +03:00
Vitaliy Filippov 168cc2c803 Add pool support to OSD, part 1
This just fixes all the code so it builds and works like before,
but doesn't yet bring the support for replicated pools.
2020-09-04 17:04:17 +03:00
Vitaliy Filippov 4cdad634b5 Add pool support to the cluster client 2020-09-03 00:52:41 +03:00
Vitaliy Filippov 293cb5bd1d Parse pool configuration in etcd_state_client 2020-09-02 21:54:32 +03:00
Vitaliy Filippov 0918ea08fa Implement min/max inode filters in LIST operation 2020-09-02 14:42:40 +03:00
Vitaliy Filippov a8b3cbd6af Implement per-pool PG calculation, fix some lint warnings 2020-09-01 18:53:54 +03:00
Vitaliy Filippov fe0d78bf8e Filter configuration keys with regexps instead of "osd_tree" value checks 2020-09-01 17:07:06 +03:00
Vitaliy Filippov 085c145a18 Document etcd data (to-be state with pools) at least in some form 2020-09-01 16:29:45 +03:00
Vitaliy Filippov 30da4bddbe Extract scale_pg_count into a separate file 2020-09-01 16:18:58 +03:00
Vitaliy Filippov 14b4a4617e (re)move placement_tree 2020-09-01 16:18:58 +03:00
Vitaliy Filippov 3932c9b2e2 Add WRITE_STABLE to the secondary OSD for the upcoming replication support 2020-09-01 16:18:58 +03:00
Vitaliy Filippov 2e8c69fc5b Rename OSD_OP_SECONDARY_* to OSD_OP_SEC_* 2020-08-31 23:57:50 +03:00
Vitaliy Filippov a86788fe3b Support optimizing for the case when parity chunks occupy more space than data chunks
Mostly as an experiment because the problem solved by this commit
comes from Ceph's EC+compression implementation details and I'm not sure
if my implementation will be the same
2020-08-17 01:44:19 +03:00
Vitaliy Filippov 95ebfad283 Final name is Vitastor 2020-08-03 23:50:59 +03:00
Vitaliy Filippov 6022f28dc9 Add pseudo-random PG generation 2020-07-07 23:13:07 +03:00
Vitaliy Filippov 9d10a4d057 Support arbitrary pg_size in LPOptimizer 2020-07-05 20:28:05 +03:00
Vitaliy Filippov ec7acc8f3a Add WRITE_STABLE operation for future replication support 2020-07-05 01:48:02 +03:00
Vitaliy Filippov 416a80b099 Make blockstore object state a combination of type and workflow 2020-07-04 22:20:32 +03:00
Vitaliy Filippov a7929931eb Implement PG epochs to prevent the "version split"
The "version split" is when:
- A block is written to 1 OSD out of 3, all of them die
- OSDs 2 and 3 come up, the same block is written to both of them
- The remaining OSD comes up. Now all 3 OSDs have the same version of the same object,
  but with different data.
2020-07-04 00:55:27 +03:00
Vitaliy Filippov e680d6c1c3 Rename reconstruct_stripe and calc_rmw_parity to indicate that they are only for XOR N+1 2020-06-30 10:40:43 +03:00
Vitaliy Filippov 9b33f598d3 Fix two more cluster client bugs
1) Sync could delete an unfinished write due to the lack of ordering (fixed by introducing syncing_writes)
2) Writes could be postponed indefinitely due to bad resuming of operations after a sync
2020-06-27 02:13:35 +03:00
Vitaliy Filippov 592bcd3699 Fix QEMU driver bugs (QEMU and qemu-img now work! hooray!) 2020-06-26 18:25:43 +03:00
Vitaliy Filippov 5e1e39633d Implement QEMU block driver 2020-06-25 11:59:43 +03:00
Vitaliy Filippov 41c2655edd Disconnect sockets when read returns zero 2020-06-24 01:32:19 +03:00
Vitaliy Filippov d68370304e Support iovecs in cluster_client_t 2020-06-24 01:31:48 +03:00
Vitaliy Filippov a22d9f38aa Only use EPOLLOUT while connecting 2020-06-23 20:18:31 +03:00
Vitaliy Filippov 8736b3ad32 Add destructors, make ringloop optional in cluster_client_t 2020-06-23 20:10:33 +03:00
Vitaliy Filippov 62343c8022 Allow to turn synchronous recvmsg/sendmsg on with a config option 2020-06-23 01:15:07 +03:00
Vitaliy Filippov 9abaf5b735 Use epoll_manager in osd 2020-06-20 01:28:18 +03:00
Vitaliy Filippov badf68c039 Support iovecs for read operations 2020-06-19 19:47:05 +03:00
Vitaliy Filippov 0f6d193d73 Postpone op callbacks to the end of handle_read(), fix a bug where primary OSD could reply -EPIPE with data to a read operation 2020-06-16 01:36:38 +03:00
Vitaliy Filippov 27ee14a4e6 Fix bugs in cluster_client 2020-06-16 00:08:45 +03:00
Vitaliy Filippov 64afec03ec In theory, implement syncs and replay for the non-immediate commit mode 2020-06-15 00:04:16 +03:00
Vitaliy Filippov 4dde8b8a42 Oops, fix fio_sec_osd block_order parsing 2020-06-09 00:52:00 +03:00
Vitaliy Filippov f5ccb154af Benchmark reads in stub_bench, too 2020-06-08 01:54:44 +03:00
Vitaliy Filippov 73c80e2c39 Move accept_connections() to osd_messenger_t, add a simple uring OSD stub 2020-06-08 01:32:16 +03:00
Vitaliy Filippov 437dc5b630 Implement a FIO engine for testing cluster I/O 2020-06-07 00:30:15 +03:00
Vitaliy Filippov 226f5a2945 Allow to override block_size in fio_sec_osd 2020-06-07 00:10:13 +03:00
Vitaliy Filippov 2187d06eac Add a parameter to pass the initial config to client 2020-06-07 00:10:12 +03:00
Vitaliy Filippov c573bc6bb3 (Probably almost) implement cluster client 2020-06-07 00:09:36 +03:00
Vitaliy Filippov 2f6cf605a1 Rename cluster_client to osd_messenger 2020-06-04 12:57:54 +03:00
Vitaliy Filippov 05ea97119f Fix BS_OP_LIST to account for deleted objects: only list the newest stable entry of each object
This allows list responses to be unaffected by journal flushes, which, in turn,
fixes PG peering when a peer OSD is replaying journal and journal contains deletions
2020-06-02 23:52:48 +03:00
Vitaliy Filippov 571be0f380 Make deletions instantly stable
"2-phase" (write->stabilize) process is pointless for deletions because it
doesn't protect us from incomplete objects. This happens because it removes
the version information from metadata after stabilization. Deletions require
"3-phase" process with a potentially very long 3rd phase.

So, deletions will be allowed to generate degraded and incomplete objects,
and for it to not affect users' ability to delete something, the cluster
will allow to delete whole inodes while storing a list of them in etcd.
Proper TRIM will be impossible until the implementation of the aforementioned
"3-phase" process, though.

By the way, this change also fixes a possible write stall after rebalancing
which was caused by the lack of "stabilize delete" operations.
2020-06-02 23:45:22 +03:00
Vitaliy Filippov 985c309d7f Remove duplicate code between blockstore_{rollback,stable} and blockstore_init 2020-06-02 20:37:00 +03:00
Vitaliy Filippov a56f8cd14e Simplify handle_primary_subop() arguments 2020-06-02 18:44:23 +03:00
Vitaliy Filippov 46e111272f Replace assert(this_it == cur_op) with if() for the case of PG repeering 2020-06-02 14:30:57 +03:00
Vitaliy Filippov 165c204555 Fix BS_OP_DELETE (the implementation was untested up to this point) 2020-06-02 14:26:01 +03:00
Vitaliy Filippov af5cd45071 Oh crap, got SIGPIPE. Add MSG_NOSIGNAL 2020-06-02 11:41:08 +03:00
Vitaliy Filippov c3fe9ad0d1 Fix rebalancing writes (add a forgotten state resume) 2020-06-02 01:26:14 +03:00
Vitaliy Filippov 0fcdeae18b Do not die if a peer is already stopped on flush error 2020-06-01 23:07:08 +03:00
Vitaliy Filippov e6a4b634f8 Fix possible write stall
The stall occurred during fio Q=128 random write tests with low flusher_count (4).
It was caused by flushers being unable to flush the beginning of the journal
because it contained older writes to an object that also had writes in the very end
of the journal, after dirty_start.
2020-06-01 16:18:23 +03:00
Vitaliy Filippov c22e096943 Output journal offsets in debug trace in hex, add detailed "still waiting" messages 2020-06-01 16:18:19 +03:00
Vitaliy Filippov 45b1c2fbf1 Fix canceling of write operations on PG re-peer (which led to use-after-free, too...) 2020-06-01 16:18:14 +03:00
Vitaliy Filippov 3469bead67 Protect "delete this" with a stack refcounter
(to fix use-after-free, too, but "delete this" was a time bomb anyway)
2020-06-01 16:18:09 +03:00
Vitaliy Filippov 3a5d488f19 Fix use-after-free in osd_flush.cpp 2020-06-01 01:56:24 +03:00
Vitaliy Filippov 73e4e30b1f Auto-generate C++ header dependencies 2020-06-01 00:25:25 +03:00
Vitaliy Filippov 5feff1ffb9 Slightly cleanup socket send/receive code 2020-05-31 15:03:27 +03:00
Vitaliy Filippov b466e215f0 Fix queued OP_SYNC execution 2020-05-27 13:55:25 +03:00
Vitaliy Filippov 36f995367f Fix bind_address reporting 2020-05-27 10:58:40 +03:00
Vitaliy Filippov 0aca6e9ca8 Extract peer connect and read-write loop into a separate file (to be shared with the client library) 2020-05-26 22:11:30 +03:00
Vitaliy Filippov fa98be6bc0 Allow to specify multiple etcd addresses 2020-05-25 16:30:05 +03:00
Vitaliy Filippov 256a7f2667 Free op->bs_op manually 2020-05-25 15:31:22 +03:00
Vitaliy Filippov 79bf57b6e2 Allow to override pg_stripe_size 2020-05-25 15:31:22 +03:00
Vitaliy Filippov 53f6aba3e6 Die when journal_sector_buffer_count is too small 2020-05-24 17:26:47 +03:00
Vitaliy Filippov 36595eb669 Print "Ran out of journal sector buffers" warning 2020-05-24 16:48:50 +03:00
Vitaliy Filippov e09d0e0678 Several bug fixes
- Do not block flock() requests
- Fix stop_client(0) attempts leading to std::bad_function_call
- Fix degraded writes crashing due to an unset stripes[i].missing (at least with a missing parity device)
- Fix recovery B/W reporting
2020-05-24 01:51:35 +03:00
Vitaliy Filippov d1602b50b3 Fix BS_OP_ROLLBACK removing an incorrect version
Instead of only removing versions with oid == X and version > Y it was
also removing the previous version in list (with the previous oid or
with version == Y)
2020-05-24 01:51:28 +03:00
Vitaliy Filippov 7df384031a Re-peer PGs after stopping the peer
Fixes the bug where two peers killed at once have lead to PG state PG_DEGRADED|PG_HAS_INCOMPLETE instead of PG_INCOMPLETE
2020-05-23 18:45:12 +03:00
Vitaliy Filippov e614a98543 Add a sad FIXME :-) 2020-05-23 15:43:37 +03:00
Vitaliy Filippov 01dd3ef89e Fix timerfd_manager triggering of multiple times at the same time 2020-05-23 15:43:37 +03:00
Vitaliy Filippov cdccc23aff Print [OSD $osd_num] in stats, print B/W only for ops that log bytes 2020-05-23 15:43:37 +03:00
Vitaliy Filippov 700428829a Fix autosync_interval default not setting when autosync_interval is skipped in config 2020-05-23 15:43:37 +03:00
Vitaliy Filippov 6488d0044a Ignore EPOLL_CTL_DEL ENOENT, fix detection of the rollback version 2020-05-23 15:43:37 +03:00
Vitaliy Filippov 393fe75900 Fix creepy (osd_op_t*)(long) casts 2020-05-23 15:43:37 +03:00
Vitaliy Filippov f036eecf1c Fix osd_rmw object recovery case (len==0) 2020-05-23 15:43:37 +03:00
Vitaliy Filippov e56909fb45 Remove tv_send (unused) and timerfd_interval from blockstore 2020-05-22 15:57:08 +03:00
Vitaliy Filippov fac75b0b57 Handle reweights in mon 2020-05-22 12:52:27 +03:00
Vitaliy Filippov 9f842ec9a5 Remove connect callback because it is always the same 2020-05-22 12:45:12 +03:00
Vitaliy Filippov f6a01a4819 Extract "state-watching" etcd client into a separate file 2020-05-22 12:38:40 +03:00
Vitaliy Filippov 6202260018 Extract HTTP client functions from osd_t 2020-05-21 11:39:01 +03:00
Vitaliy Filippov a61ede9951 Remove io_uring usage from osd_http and timerfd_manager
For better future interoperability with external event loops such as QEMU's one
2020-05-21 01:25:38 +03:00
Vitaliy Filippov f57731f8ca Calculate total stats in the monitor 2020-05-15 01:37:17 +03:00
Vitaliy Filippov 19f25c7cd5 Handle integer overflow of the op_stat_count 2020-05-15 01:37:17 +03:00
Vitaliy Filippov 2c3e84cc41 Implement stop_all_pgs() 2020-05-15 01:37:17 +03:00
Vitaliy Filippov 7bda66b866 Do not crash when optimising PGs in an undersized cluster 2020-05-15 01:29:15 +03:00
Vitaliy Filippov b467d0559f Begin node.js storage monitor service 2020-05-15 01:29:15 +03:00
Vitaliy Filippov c2c2eefea4 Duplicate host in osd/state and osd/stats, take PGs from /config/pgs.items 2020-05-15 01:29:15 +03:00
Vitaliy Filippov 5084ff7c6c Measure & report recovery op count and bandwidth 2020-05-15 01:29:15 +03:00
Vitaliy Filippov 47b6f64106 Support level names 2020-05-11 15:57:21 +03:00
Vitaliy Filippov f71d0c117b Measure & report op bandwidth, include local blockstore ops in stats 2020-05-11 02:58:13 +03:00
Vitaliy Filippov 2b854948f9 Remove dead code 2020-05-09 16:15:02 +03:00
Vitaliy Filippov e7f897ed65 Report hostname to etcd 2020-05-09 02:33:43 +03:00
Vitaliy Filippov c26b6e1fc3 Support CRUSH-like multi-level placement trees 2020-05-09 00:55:24 +03:00
Vitaliy Filippov aaa054e644 Fix optimize_change generating infeasible problems
Mainly happened when removing PG combinations (removing OSDs)

Also randomize OSD combinations when there's a lot of them

Also remove Perl version
2020-05-08 16:42:40 +03:00
Vitaliy Filippov 706a44d4d4 Fix optimize_initial in both perl and js versions 2020-05-06 23:12:03 +03:00
Vitaliy Filippov 842f88f94f Rewrite LPOptimizer.pm to nodejs 2020-05-06 02:08:15 +03:00
Vitaliy Filippov e8149e5848 Implement OSD_OP_DELETE 2020-05-05 00:39:51 +03:00
Vitaliy Filippov 6355b968f4 Track osd_set history and all_peers separately 2020-05-04 15:28:07 +03:00
Vitaliy Filippov 00cf24fbd7 Split osd_primary.cpp 2020-05-03 11:04:20 +03:00
Vitaliy Filippov 1bc08174f9 Sync before listing objects so flushes do not fail thereafter 2020-05-01 12:56:49 +03:00
Vitaliy Filippov cd87333091 Fix PG state comparison leading to unclean PGs not flushing
(a & b == b) -> ((a & b) == b) !
2020-05-01 12:56:46 +03:00
Vitaliy Filippov bd0fe6e4cc Fix PGs not stopping during sync, fix state reporting autovivification of erased PGs 2020-05-01 01:33:14 +03:00
Vitaliy Filippov ce78454215 Reply with -EROFS to write commands in readonly mode 2020-05-01 00:54:34 +03:00
Vitaliy Filippov 762bd42096 Fix use-after-free caused by "delete this" in handle_read 2020-04-30 02:15:53 +03:00
Vitaliy Filippov 7b57eeeeb3 Implement PG state locking and PG moving in response to etcd events 2020-04-29 22:23:38 +03:00
Vitaliy Filippov ec4a52af48 Fix websocket (and timer!) bugs 2020-04-26 01:59:56 +03:00
Vitaliy Filippov 268b497c0b Implement simple websocket client 2020-04-25 23:11:50 +03:00
Vitaliy Filippov 35481925b1 Implement very simple HTTP streaming to handle etcd watches 2020-04-25 01:35:52 +03:00
Vitaliy Filippov 895a80dfc4 Fix etcd 3.2 compatibility (no compare.target == LEASE, /kv/lease/revoke), fix small bugs 2020-04-25 01:35:52 +03:00
Vitaliy Filippov caa01c6aaf Acquire etcd leases, prevent starting two OSDs with the same number 2020-04-25 01:35:52 +03:00
Vitaliy Filippov d398ddfd3b Use snake_case for etcd requests 2020-04-25 01:35:52 +03:00
Vitaliy Filippov 0f2b8dbf6f Use a single timerfd_manager for all timers 2020-04-25 01:35:49 +03:00
Vitaliy Filippov 4f42e9659e Use etcd instead of Consul 2020-04-24 01:03:55 +03:00
Vitaliy Filippov 7cf71a8031 Fix timerfd_manager: remove timer, then call callback 2020-04-21 12:45:18 +03:00
Vitaliy Filippov 9d22559bcf Start peering immediately when loading PGs 2020-04-21 02:27:13 +03:00
Vitaliy Filippov 8c03e3ebab Lock Blockstore devices exclusively by default 2020-04-21 01:59:11 +03:00
Vitaliy Filippov 2a640ba2e8 Remove range port selection (leads to races) 2020-04-21 00:10:59 +03:00
Vitaliy Filippov 6a21ea207e Check peer config (at least, number) after connecting 2020-04-21 00:08:54 +03:00
Vitaliy Filippov 642802b595 Auto-select port numbers 2020-04-20 17:45:27 +03:00
Vitaliy Filippov ff38b464a5 Add consul & connect timeouts, report state before loading PGs, move init_primary to osd_cluster 2020-04-20 15:43:07 +03:00
Vitaliy Filippov 663153713b Reconnect to peers after connecting drops 2020-04-19 01:01:26 +03:00
Vitaliy Filippov dc57c5c362 Report PG states again, clear PG history on reaching active+clean 2020-04-19 00:48:23 +03:00
Vitaliy Filippov f95299b769 Take PG history into account when starting PGs 2020-04-19 00:20:18 +03:00
Vitaliy Filippov 9126ffb0f9 Fix PG loading - now it works, at least once 2020-04-17 02:33:44 +03:00
Vitaliy Filippov 2a8e40835e Fix reporting to Consul, report even if we are purely secondary 2020-04-17 01:59:06 +03:00
Vitaliy Filippov 309486d746 Implement loading PGs from Consul (in theory) 2020-04-16 23:22:32 +03:00
Vitaliy Filippov 582f485578 Extract http & getifaddr_list into a separate file 2020-04-15 15:47:06 +03:00
Vitaliy Filippov 089b4eb208 Retry consul connection attempts and then die 2020-04-15 15:33:18 +03:00
Vitaliy Filippov d78ce509c6 Add simple timer manager 2020-04-15 13:41:44 +03:00
Vitaliy Filippov f3a7ccff50 Use 4K blockstore block by default, use MEM_ALIGNMENT in osd code 2020-04-14 19:19:56 +03:00
Vitaliy Filippov 37b27c3025 Implement basic OSD status reporting to Consul 2020-04-14 14:52:06 +03:00
Vitaliy Filippov edf6d6f897 Fix http_request 2020-04-12 02:08:00 +03:00
Vitaliy Filippov d11e8dcb5e Do not flush or recover in readonly mode 2020-04-11 12:06:18 +03:00
Vitaliy Filippov dd02bc1c44 Add base64 implementation 2020-04-11 12:06:18 +03:00
Vitaliy Filippov 298b013eae Add simple http request function 2020-04-11 12:05:58 +03:00
Vitaliy Filippov 0880a77c1a 2 FIXME for the future 2020-04-06 00:55:47 +03:00
Vitaliy Filippov aa849ea07b Add a test for missing chunk overwrite 2020-04-05 16:14:03 +03:00
Vitaliy Filippov d59be0e8b4 Delete misplaced chunks after moving the object, reset object state in primary_write 2020-04-05 15:51:22 +03:00
Vitaliy Filippov cf7de0f181 (Almost) Implement misplaced recovery, integrating it into calc_rmw() 2020-04-05 15:50:53 +03:00
Vitaliy Filippov 6212195440 Implement parallel recovery 2020-04-04 19:23:12 +03:00
Vitaliy Filippov dfb6e15eaa Implement graceful stopping of PGs 2020-04-03 13:03:42 +03:00
Vitaliy Filippov afe2e76c87 Implement regular automatic syncs, split osd_t constructor into some methods 2020-04-02 22:16:46 +03:00
Vitaliy Filippov 0f43f6d3f6 Fix crashes, print some stats
Notably:
- fix the `delete op` inside lambda callback crash (it frees the lambda itself
  which results in use-after-free with g++)
- fix stop_client() reenterability
- fix a bug in the blockstore layer which resulted in always returning version=0
  for zero-length reads
- change error codes for blockstore_stabilize
2020-03-31 17:55:31 +03:00
Vitaliy Filippov 92c800bb64 Forget unstable writes when re-peering, rename parity_block_size -> pg_stripe_size, pg_parity_size -> pg_block_size 2020-03-31 02:09:25 +03:00
Vitaliy Filippov 8a8b619875 Handle secondary OSD connection errors [in theory] 2020-03-30 19:51:34 +03:00
Vitaliy Filippov 43fe1d88e7 Fix memory leaks with subops, fix recovery crashes 2020-03-28 19:09:20 +03:00
Vitaliy Filippov 1b30120918 Fix stripe reconstruction in recovery, only write modified object parts 2020-03-28 13:58:42 +03:00
Vitaliy Filippov c0a22d825d Fix degraded object recovery (it seems to work now) 2020-03-25 02:17:41 +03:00
Vitaliy Filippov 7acfc95f75 CONFIG_HAVE_GETTID 2020-03-25 01:20:20 +03:00
Vitaliy Filippov 250f22c0b6 Implement basic degraded object recovery (integrated into primary_write) 2020-03-25 01:17:50 +03:00
Vitaliy Filippov dbd8418798 Reply using a single finish_op() method, allow to call OSD ops from inside the OSD 2020-03-24 00:18:52 +03:00
Vitaliy Filippov 036f4c5bf3 Fix unstable flushing, include extra OSDs with old object versions in osd_set 2020-03-23 20:28:47 +03:00
Vitaliy Filippov fd8e1a8418 Slightly reorganize object state check code 2020-03-23 00:42:17 +03:00
Vitaliy Filippov a08e0bfacd Treat misplaced and degraded as separate state parts 2020-03-23 00:40:31 +03:00
Vitaliy Filippov ddc3e927d3 Solve it in integers 2020-03-20 13:58:54 +03:00
Vitaliy Filippov 2aa605f2bb Do not check 2020-03-20 13:38:35 +03:00
Vitaliy Filippov 18915b264a Extract to .pm + fix all_combinations 2020-03-19 21:35:47 +03:00
Vitaliy Filippov 60f795e7eb Add lp_solve based data distribution optimizer 2020-03-19 17:23:24 +03:00
Vitaliy Filippov 3a4279adbf Hash-based PG distribution experiments 2020-03-17 18:52:39 +03:00
Vitaliy Filippov 1ec9794376 Extract flushing into a separate file 2020-03-15 18:39:31 +03:00
Vitaliy Filippov d8164e9d84 Print PG states on every change 2020-03-14 22:19:45 +03:00
Vitaliy Filippov 21d0b06959 Implement flushing (stabilize/rollback) of unstable entries on start of the PG 2020-03-14 02:49:34 +03:00
Vitaliy Filippov 46f9bd2a69 Make blockstore list operation return consistent snapshots 2020-03-14 02:10:25 +03:00
Vitaliy Filippov 6982fe1255 Do not block reads by previous unfinished writes 2020-03-13 21:28:49 +03:00
Vitaliy Filippov eba053febe Do not start small writes before finishing the last big write to the same object 2020-03-12 02:15:01 +03:00
Vitaliy Filippov 899946ff96 Add osd_test function to unblock an OSD blocked by the lack of journal space 2020-03-10 17:19:24 +03:00
Vitaliy Filippov 3dd1b22d55 Fix segfault with concurrent OP_SYNCs 2020-03-10 17:00:23 +03:00
Vitaliy Filippov 31f9445030 Use immediate_commit to benefit the primary OSD 2020-03-10 02:20:16 +03:00
Vitaliy Filippov 3f522c66e6 Implement immediate commit mode 2020-03-10 01:59:15 +03:00
Vitaliy Filippov c3737ae3ff Add journal fsync to stabilize/rollback 2020-03-09 00:35:58 +03:00
Vitaliy Filippov c863543bfe Fix possible journal corruption caused by concurrent flushing and writing of the same journal sector 2020-03-08 01:21:19 +03:00
Vitaliy Filippov 1696446545 Rename min/max _used to _flushed 2020-03-07 16:41:58 +03:00
Vitaliy Filippov 41dddddbf2 Fix some logging 2020-03-07 16:41:53 +03:00
Vitaliy Filippov 2d4e24c9ce Add journal dumper debugging tool 2020-03-06 02:29:43 +03:00
Vitaliy Filippov 844cacd357 Allow incorrectly forbidden BS_OP_LIST in readonly mode 2020-03-06 02:29:39 +03:00
Vitaliy Filippov e19d9fde5f Fix peering_pg, begin tests 2020-03-06 02:02:49 +03:00
Vitaliy Filippov 9cb07d844b Make [un]register_consumer operate on pointers, rename get_loop_again() to has_work() 2020-03-04 21:00:20 +03:00
Vitaliy Filippov 1e21555343 Add FIXME with Oops 2020-03-04 20:34:45 +03:00
Vitaliy Filippov 94cdbcd085 Stop reading when less than <buffer> data is available 2020-03-04 18:03:16 +03:00
Vitaliy Filippov 8315407558 Incoming data pre-buffering 2020-03-04 17:34:45 +03:00
Vitaliy Filippov b27ad550cf Use btree_map instead of sparsepp 2020-03-04 17:12:27 +03:00
Vitaliy Filippov 8e63995306 Allow to specify data area size 2020-03-04 02:32:49 +03:00
366 changed files with 60349 additions and 6045 deletions

19
.dockerignore Normal file
View File

@ -0,0 +1,19 @@
.git
build
packages
mon/node_modules
*.o
*.so
osd
stub_osd
stub_uring_osd
stub_bench
osd_test
dump_journal
nbd_proxy
rm_inode
fio
qemu
rpm/*.Dockerfile
debian/*.Dockerfile
Dockerfile

18
.gitignore vendored Normal file
View File

@ -0,0 +1,18 @@
*.o
*.so
package-lock.json
fio
qemu
osd
stub_osd
stub_uring_osd
stub_bench
osd_test
osd_peering_pg_test
dump_journal
nbd_proxy
rm_inode
test_allocator
test_blockstore
test_shit
osd_rmw_test

6
.gitmodules vendored Normal file
View File

@ -0,0 +1,6 @@
[submodule "cpp-btree"]
path = cpp-btree
url = ../cpp-btree.git
[submodule "json11"]
path = json11
url = ../json11.git

7
CMakeLists.txt Normal file
View File

@ -0,0 +1,7 @@
cmake_minimum_required(VERSION 2.8)
project(vitastor)
set(VERSION "0.6.17")
add_subdirectory(src)

339
GPL-2.0.txt Normal file
View File

@ -0,0 +1,339 @@
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.

27
LICENSE Normal file
View File

@ -0,0 +1,27 @@
Copyright (c) Vitaliy Filippov (vitalif [at] yourcmc.ru), 2019+
All server-side code (OSD, Monitor and so on) is licensed under the terms of
Vitastor Network Public License 1.1 (VNPL 1.1), a copyleft license based on
GNU GPLv3.0 with the additional "Network Interaction" clause which requires
opensourcing all programs directly or indirectly interacting with Vitastor
through a computer network and expressly designed to be used in conjunction
with it ("Proxy Programs"). Proxy Programs may be made public not only under
the terms of the same license, but also under the terms of any GPL-Compatible
Free Software License, as listed by the Free Software Foundation.
This is a stricter copyleft license than the Affero GPL.
Please note that VNPL doesn't require you to open the code of proprietary
software running inside a VM if it's not specially designed to be used with
Vitastor.
Basically, you can't use the software in a proprietary environment to provide
its functionality to users without opensourcing all intermediary components
standing between the user and Vitastor or purchasing a commercial license
from the author 😀.
Client libraries (cluster_client and so on) are dual-licensed under the same
VNPL 1.1 and also GNU GPL 2.0 or later to allow for compatibility with GPLed
software like QEMU and fio.
You can find the full text of VNPL-1.1 in the file [VNPL-1.1.txt](VNPL-1.1.txt).
GPL 2.0 is also included in this repository as [GPL-2.0.txt](GPL-2.0.txt).

View File

@ -1,66 +0,0 @@
BLOCKSTORE_OBJS := allocator.o blockstore.o blockstore_impl.o blockstore_init.o blockstore_open.o blockstore_journal.o blockstore_read.o \
blockstore_write.o blockstore_sync.o blockstore_stable.o blockstore_rollback.o blockstore_flush.o crc32c.o ringloop.o timerfd_interval.o
# -fsanitize=address
CXXFLAGS := -g -O3 -Wall -Wno-sign-compare -Wno-comment -Wno-parentheses -Wno-pointer-arith -fPIC -fdiagnostics-color=always
all: $(BLOCKSTORE_OBJS) libfio_blockstore.so osd libfio_sec_osd.so test_blockstore stub_osd stub_bench osd_test
clean:
rm -f *.o
crc32c.o: crc32c.c
g++ $(CXXFLAGS) -c -o $@ $<
json11.o: json11/json11.cpp
g++ $(CXXFLAGS) -c -o json11.o json11/json11.cpp
allocator.o: allocator.cpp allocator.h
g++ $(CXXFLAGS) -c -o $@ $<
ringloop.o: ringloop.cpp ringloop.h
g++ $(CXXFLAGS) -c -o $@ $<
timerfd_interval.o: timerfd_interval.cpp timerfd_interval.h ringloop.h
g++ $(CXXFLAGS) -c -o $@ $<
%.o: %.cpp allocator.h blockstore_flush.h blockstore.h blockstore_impl.h blockstore_init.h blockstore_journal.h crc32c.h ringloop.h timerfd_interval.h object_id.h
g++ $(CXXFLAGS) -c -o $@ $<
libblockstore.so: $(BLOCKSTORE_OBJS)
g++ $(CXXFLAGS) -o libblockstore.so -shared $(BLOCKSTORE_OBJS) -ltcmalloc_minimal -luring
libfio_blockstore.so: ./libblockstore.so fio_engine.cpp json11.o
g++ $(CXXFLAGS) -shared -o libfio_blockstore.so fio_engine.cpp json11.o ./libblockstore.so -ltcmalloc_minimal -luring
OSD_OBJS := osd.o osd_secondary.o osd_receive.o osd_send.o osd_peering.o osd_peering_pg.o osd_primary.o osd_rmw.o json11.o timerfd_interval.o
osd_secondary.o: osd_secondary.cpp osd.h osd_ops.h ringloop.h
g++ $(CXXFLAGS) -c -o $@ $<
osd_receive.o: osd_receive.cpp osd.h osd_ops.h ringloop.h
g++ $(CXXFLAGS) -c -o $@ $<
osd_send.o: osd_send.cpp osd.h osd_ops.h ringloop.h
g++ $(CXXFLAGS) -c -o $@ $<
osd_peering.o: osd_peering.cpp osd.h osd_ops.h osd_peering_pg.h ringloop.h
g++ $(CXXFLAGS) -c -o $@ $<
osd_peering_pg.o: osd_peering_pg.cpp object_id.h osd_peering_pg.h
g++ $(CXXFLAGS) -c -o $@ $<
osd_rmw.o: osd_rmw.cpp osd_rmw.h xor.h
g++ $(CXXFLAGS) -c -o $@ $<
osd_rmw_test: osd_rmw_test.cpp osd_rmw.cpp osd_rmw.h xor.h
g++ $(CXXFLAGS) -o $@ $<
osd_primary.o: osd_primary.cpp osd.h osd_ops.h osd_peering_pg.h xor.h ringloop.h
g++ $(CXXFLAGS) -c -o $@ $<
osd.o: osd.cpp osd.h osd_ops.h osd_peering_pg.h ringloop.h
g++ $(CXXFLAGS) -c -o $@ $<
osd: ./libblockstore.so osd_main.cpp osd.h osd_ops.h $(OSD_OBJS)
g++ $(CXXFLAGS) -o osd osd_main.cpp $(OSD_OBJS) ./libblockstore.so -ltcmalloc_minimal -luring
stub_osd: stub_osd.cpp osd_ops.h rw_blocking.o
g++ $(CXXFLAGS) -o stub_osd stub_osd.cpp rw_blocking.o -ltcmalloc_minimal
stub_bench: stub_bench.cpp osd_ops.h rw_blocking.o
g++ $(CXXFLAGS) -o stub_bench stub_bench.cpp rw_blocking.o -ltcmalloc_minimal
rw_blocking.o: rw_blocking.cpp rw_blocking.h
g++ $(CXXFLAGS) -c -o $@ $<
osd_test: osd_test.cpp osd_ops.h rw_blocking.o
g++ $(CXXFLAGS) -o osd_test osd_test.cpp rw_blocking.o -ltcmalloc_minimal
libfio_sec_osd.so: fio_sec_osd.cpp osd_ops.h rw_blocking.o
g++ $(CXXFLAGS) -ltcmalloc_minimal -shared -o libfio_sec_osd.so fio_sec_osd.cpp rw_blocking.o -luring
test_blockstore: ./libblockstore.so test_blockstore.cpp
g++ $(CXXFLAGS) -o test_blockstore test_blockstore.cpp ./libblockstore.so -ltcmalloc_minimal -luring
test: test.cpp osd_peering_pg.o
g++ $(CXXFLAGS) -o test test.cpp osd_peering_pg.o -luring
test_allocator: test_allocator.cpp allocator.o
g++ $(CXXFLAGS) -o test_allocator test_allocator.cpp allocator.o

100
README-ru.md Normal file
View File

@ -0,0 +1,100 @@
## Vitastor
[Read English version](README.md)
## Идея
Вернём былую скорость кластерному блочному хранилищу!
Vitastor - распределённая блочная SDS (программная СХД), прямой аналог Ceph RBD и
внутренних СХД популярных облачных провайдеров. Однако, в отличие от них, Vitastor
быстрый и при этом простой. Только пока маленький :-).
Vitastor архитектурно похож на Ceph, что означает атомарность и строгую консистентность,
репликацию через первичный OSD, симметричную кластеризацию без единой точки отказа
и автоматическое распределение данных по любому числу дисков любого размера с настраиваемыми схемами
избыточности - репликацией или с произвольными кодами коррекции ошибок.
Vitastor нацелен на SSD и SSD+HDD кластеры с как минимум 10 Гбит/с сетью, поддерживает
TCP и RDMA и на хорошем железе может достигать задержки 4 КБ чтения и записи на уровне ~0.1 мс,
что примерно в 10 раз быстрее, чем Ceph и другие популярные программные СХД.
Vitastor поддерживает QEMU-драйвер, протоколы NBD и NFS, драйверы OpenStack, Proxmox, Kubernetes.
Другие драйверы могут также быть легко реализованы.
Подробности смотрите в документации по ссылкам ниже.
## Презентации и записи докладов
- DevOpsConf'2021: презентация ([на русском](https://vitastor.io/presentation/devopsconf/devopsconf.html),
[на английском](https://vitastor.io/presentation/devopsconf/devopsconf_en.html)),
[видео](https://vitastor.io/presentation/devopsconf/talk.webm)
- Highload'2022: презентация ([на русском](https://vitastor.io/presentation/highload/highload.html)),
[видео](https://vitastor.io/presentation/highload/talk.webm)
## Документация
- Введение
- [Быстрый старт](docs/intro/quickstart.ru.md)
- [Возможности](docs/intro/features.ru.md)
- [Архитектура](docs/intro/architecture.ru.md)
- [Автор и лицензия](docs/intro/author.ru.md)
- Установка
- [Пакеты](docs/installation/packages.ru.md)
- [Proxmox](docs/installation/proxmox.ru.md)
- [OpenStack](docs/installation/openstack.ru.md)
- [Kubernetes CSI](docs/installation/kubernetes.ru.md)
- [Сборка из исходных кодов](docs/installation/source.ru.md)
- Конфигурация
- [Обзор](docs/config.ru.md)
- Параметры
- [Общие](docs/config/common.ru.md)
- [Сетевые](docs/config/network.ru.md)
- [Глобальные дисковые параметры](docs/config/layout-cluster.ru.md)
- [Дисковые параметры OSD](docs/config/layout-osd.ru.md)
- [Прочие параметры OSD](docs/config/osd.ru.md)
- [Параметры мониторов](docs/config/monitor.ru.md)
- [Настройки пулов](docs/config/pool.ru.md)
- [Метаданные образов в etcd](docs/config/inode.ru.md)
- Использование
- [vitastor-cli](docs/usage/cli.ru.md) (консольный интерфейс)
- [fio](docs/usage/fio.ru.md) для тестов производительности
- [NBD](docs/usage/nbd.ru.md) для монтирования ядром
- [QEMU и qemu-img](docs/usage/qemu.ru.md)
- [NFS](docs/usage/nfs.ru.md)-прокси для VMWare и подобных
- Производительность
- [Понимание сути производительности](docs/performance/understanding.ru.md)
- [Теоретический максимум](docs/performance/theoretical.ru.md)
- [Пример сравнения с Ceph](docs/performance/comparison1.ru.md)
## Автор и лицензия
Автор: Виталий Филиппов (vitalif [at] yourcmc.ru), 2019+
Заходите в Telegram-чат Vitastor: https://t.me/vitastor
Лицензия: VNPL 1.1 на серверный код и двойная VNPL 1.1 + GPL 2.0+ на клиентский.
VNPL - "сетевой копилефт", собственная свободная копилефт-лицензия
Vitastor Network Public License 1.1, основанная на GNU GPL 3.0 с дополнительным
условием "Сетевого взаимодействия", требующим распространять все программы,
специально разработанные для использования вместе с Vitastor и взаимодействующие
с ним по сети, под лицензией VNPL или под любой другой свободной лицензией.
Идея VNPL - расширение действия копилефта не только на модули, явным образом
связываемые с кодом Vitastor, но также на модули, оформленные в виде микросервисов
и взаимодействующие с ним по сети.
Таким образом, если вы хотите построить на основе Vitastor сервис, содержаший
компоненты с закрытым кодом, взаимодействующие с Vitastor, вам нужна коммерческая
лицензия от автора 😀.
На Windows и любое другое ПО, не разработанное *специально* для использования
вместе с Vitastor, никакие ограничения не накладываются.
Клиентские библиотеки распространяются на условиях двойной лицензии VNPL 1.0
и также на условиях GNU GPL 2.0 или более поздней версии. Так сделано в целях
совместимости с таким ПО, как QEMU и fio.
Вы можете найти полный текст VNPL 1.1 в файле [VNPL-1.1.txt](VNPL-1.1.txt),
а GPL 2.0 в файле [GPL-2.0.txt](GPL-2.0.txt).

100
README.md Normal file
View File

@ -0,0 +1,100 @@
# Vitastor
[Читать на русском](README-ru.md)
## The Idea
Make Clustered Block Storage Fast Again.
Vitastor is a distributed block SDS, direct replacement of Ceph RBD and internal SDS's
of public clouds. However, in contrast to them, Vitastor is fast and simple at the same time.
The only thing is it's slightly young :-).
Vitastor is architecturally similar to Ceph which means strong consistency,
primary-replication, symmetric clustering and automatic data distribution over any
number of drives of any size with configurable redundancy (replication or erasure codes/XOR).
Vitastor targets SSD and SSD+HDD clusters with at least 10 Gbit/s network, supports
TCP and RDMA and may achieve 4 KB read and write latency as low as ~0.1 ms
with proper hardware which is ~10 times faster than other popular SDS's like Ceph
or internal systems of public clouds.
Vitastor supports QEMU, NBD, NFS protocols, OpenStack, Proxmox, Kubernetes drivers.
More drivers may be created easily.
Read more details below in the documentation.
## Talks and presentations
- DevOpsConf'2021: presentation ([in Russian](https://vitastor.io/presentation/devopsconf/devopsconf.html),
[in English](https://vitastor.io/presentation/devopsconf/devopsconf_en.html)),
[video](https://vitastor.io/presentation/devopsconf/talk.webm)
- Highload'2022: presentation ([in Russian](https://vitastor.io/presentation/highload/highload.html)),
[video](https://vitastor.io/presentation/highload/talk.webm)
## Documentation
- Introduction
- [Quick Start](docs/intro/quickstart.en.md)
- [Features](docs/intro/features.en.md)
- [Architecture](docs/intro/architecture.en.md)
- [Author and license](docs/intro/author.en.md)
- Installation
- [Packages](docs/installation/packages.en.md)
- [Proxmox](docs/installation/proxmox.en.md)
- [OpenStack](docs/installation/openstack.en.md)
- [Kubernetes CSI](docs/installation/kubernetes.en.md)
- [Building from Source](docs/installation/source.en.md)
- Configuration
- [Overview](docs/config.en.md)
- Parameter Reference
- [Common](docs/config/common.en.md)
- [Network](docs/config/network.en.md)
- [Global Disk Layout](docs/config/layout-cluster.en.md)
- [OSD Disk Layout](docs/config/layout-osd.en.md)
- [OSD Runtime Parameters](docs/config/osd.en.md)
- [Monitor](docs/config/monitor.en.md)
- [Pool configuration](docs/config/pool.en.md)
- [Image metadata in etcd](docs/config/inode.en.md)
- Usage
- [vitastor-cli](docs/usage/cli.en.md) (command-line interface)
- [fio](docs/usage/fio.en.md) for benchmarks
- [NBD](docs/usage/nbd.en.md) for kernel mounts
- [QEMU and qemu-img](docs/usage/qemu.en.md)
- [NFS](docs/usage/nfs.en.md) emulator for VMWare and similar
- Performance
- [Understanding storage performance](docs/performance/understanding.en.md)
- [Theoretical performance](docs/performance/theoretical.en.md)
- [Example comparison with Ceph](docs/performance/comparison1.en.md)
## Author and License
Copyright (c) Vitaliy Filippov (vitalif [at] yourcmc.ru), 2019+
Join Vitastor Telegram Chat: https://t.me/vitastor
All server-side code (OSD, Monitor and so on) is licensed under the terms of
Vitastor Network Public License 1.1 (VNPL 1.1), a copyleft license based on
GNU GPLv3.0 with the additional "Network Interaction" clause which requires
opensourcing all programs directly or indirectly interacting with Vitastor
through a computer network and expressly designed to be used in conjunction
with it ("Proxy Programs"). Proxy Programs may be made public not only under
the terms of the same license, but also under the terms of any GPL-Compatible
Free Software License, as listed by the Free Software Foundation.
This is a stricter copyleft license than the Affero GPL.
Please note that VNPL doesn't require you to open the code of proprietary
software running inside a VM if it's not specially designed to be used with
Vitastor.
Basically, you can't use the software in a proprietary environment to provide
its functionality to users without opensourcing all intermediary components
standing between the user and Vitastor or purchasing a commercial license
from the author 😀.
Client libraries (cluster_client and so on) are dual-licensed under the same
VNPL 1.1 and also GNU GPL 2.0 or later to allow for compatibility with GPLed
software like QEMU and fio.
You can find the full text of VNPL-1.1 in the file [VNPL-1.1.txt](VNPL-1.1.txt).
GPL 2.0 is also included in this repository as [GPL-2.0.txt](GPL-2.0.txt).

648
VNPL-1.1.txt Normal file
View File

@ -0,0 +1,648 @@
VITASTOR NETWORK PUBLIC LICENSE
Version 1.1, 6 February 2021
Copyright (C) 2021 Vitaliy Filippov <vitalif@yourcmc.ru>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The Vitastor Network Public License is a free, copyleft license for
software and other kinds of works, specifically designed to ensure
cooperation with the community in the case of network server software.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
GNU General Public Licenses and Vitastor Network Public License are
intended to guarantee your freedom to share and change all versions
of a program--to make sure it remains free software for all its users.
When we speak of free software, we are referring to freedom, not
price. GNU General Public Licenses and Vitastor Network Public License
are designed to make sure that you have the freedom to distribute copies
of free software (and charge for them if you wish), that you receive
source code or can get it if you want it, that you can change the software
or use pieces of it in new free programs, and that you know you can do these
things.
Developers that use GNU General Public Licenses and Vitastor
Network Public License protect your rights with two steps:
(1) assert copyright on the software, and (2) offer
you this License which gives you legal permission to copy, distribute
and/or modify the software.
A secondary benefit of defending all users' freedom is that
improvements made in alternate versions of the program, if they
receive widespread use, become available for other developers to
incorporate. Many developers of free software are heartened and
encouraged by the resulting cooperation. However, in the case of
software used on network servers, this result may fail to come about.
The GNU General Public License permits making a modified version and
letting the public access it on a server without ever releasing its
source code to the public. Even the GNU Affero General Public License
permits running a modified version in a closed environment where
public users only interact with it through a closed-source proxy, again,
without making the program and the proxy available to the public
for free.
The Vitastor Network Public License is designed specifically to
ensure that, in such cases, the modified program and the proxy stays
available to the community. It requires the operator of a network server to
provide the source code of the original program and all other programs
communicating with it running there to the users of that server.
Therefore, public use of a modified version, on a server accessible
directly or indirectly to the public, gives the public access to the source
code of the modified version.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 1 of the Vitastor Network Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Remote Network Interaction.
A "Proxy Program" means a separate program which is specially designed to
be used in conjunction with the covered work and interacts with it directly
or indirectly through any kind of API (application programming interfaces),
a computer network, an imitation of such network, or another Proxy Program
itself.
Notwithstanding any other provision of this License, if you provide any user
with an opportunity to interact with the covered work through a computer
network, an imitation of such network, or any number of "Proxy Programs",
you must prominently offer that user an opportunity to receive the
Corresponding Source of the covered work and all Proxy Programs from a
network server at no charge, through some standard or customary means of
facilitating copying of software. The Corresponding Source for the covered
work must be made available under the conditions of this License, and
the Corresponding Source for all Proxy Programs must be made available
under the conditions of either this License or any GPL-Compatible
Free Software License, as described by the Free Software Foundation
in their "GPL-Compatible License List".
14. Revised Versions of this License.
Vitastor Author may publish revised and/or new versions of
the Vitastor Network Public License from time to time. Such new versions
will be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the Vitastor Network
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version. If the Program does not specify a version
number of the Vitastor Network Public License, you may choose any version
ever published.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the Vitastor Network Public License as published by
the Vitastor Author, either version 1 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
Vitastor Network Public License for more details.
Also add information on how to contact you by electronic and paper mail.
If your software can interact with users remotely through a computer
network, you should also make sure that it provides a way for users to
get its source. For example, if your program is a web application, its
interface could display a "Source" link that leads users to an archive
of the code. There are many ways you could offer source, and different
solutions will be better for different programs; see section 13 for the
specific requirements.

View File

@ -1,61 +0,0 @@
#include "blockstore_impl.h"
blockstore_t::blockstore_t(blockstore_config_t & config, ring_loop_t *ringloop)
{
impl = new blockstore_impl_t(config, ringloop);
}
blockstore_t::~blockstore_t()
{
delete impl;
}
void blockstore_t::loop()
{
impl->loop();
}
bool blockstore_t::is_started()
{
return impl->is_started();
}
bool blockstore_t::is_stalled()
{
return impl->is_stalled();
}
bool blockstore_t::is_safe_to_stop()
{
return impl->is_safe_to_stop();
}
void blockstore_t::enqueue_op(blockstore_op_t *op)
{
impl->enqueue_op(op, false);
}
void blockstore_t::enqueue_op_first(blockstore_op_t *op)
{
impl->enqueue_op(op, true);
}
std::unordered_map<object_id, uint64_t> & blockstore_t::get_unstable_writes()
{
return impl->unstable_writes;
}
uint32_t blockstore_t::get_block_size()
{
return impl->get_block_size();
}
uint64_t blockstore_t::get_block_count()
{
return impl->get_block_count();
}
uint32_t blockstore_t::get_disk_alignment()
{
return impl->get_disk_alignment();
}

View File

@ -1,458 +0,0 @@
#include "blockstore_impl.h"
blockstore_impl_t::blockstore_impl_t(blockstore_config_t & config, ring_loop_t *ringloop)
{
assert(sizeof(blockstore_op_private_t) <= BS_OP_PRIVATE_DATA_SIZE);
this->ringloop = ringloop;
ring_consumer.loop = [this]() { loop(); };
ringloop->register_consumer(ring_consumer);
initialized = 0;
zero_object = (uint8_t*)memalign(MEM_ALIGNMENT, block_size);
data_fd = meta_fd = journal.fd = -1;
parse_config(config);
try
{
open_data();
open_meta();
open_journal();
calc_lengths();
data_alloc = new allocator(block_count);
}
catch (std::exception & e)
{
if (data_fd >= 0)
close(data_fd);
if (meta_fd >= 0 && meta_fd != data_fd)
close(meta_fd);
if (journal.fd >= 0 && journal.fd != meta_fd)
close(journal.fd);
throw;
}
flusher = new journal_flusher_t(flusher_count, this);
}
blockstore_impl_t::~blockstore_impl_t()
{
delete data_alloc;
delete flusher;
free(zero_object);
ringloop->unregister_consumer(ring_consumer);
if (data_fd >= 0)
close(data_fd);
if (meta_fd >= 0 && meta_fd != data_fd)
close(meta_fd);
if (journal.fd >= 0 && journal.fd != meta_fd)
close(journal.fd);
if (metadata_buffer)
free(metadata_buffer);
if (clean_bitmap)
free(clean_bitmap);
}
bool blockstore_impl_t::is_started()
{
return initialized == 10;
}
bool blockstore_impl_t::is_stalled()
{
return queue_stall;
}
// main event loop - produce requests
void blockstore_impl_t::loop()
{
// FIXME: initialized == 10 is ugly
if (initialized != 10)
{
// read metadata, then journal
if (initialized == 0)
{
metadata_init_reader = new blockstore_init_meta(this);
initialized = 1;
}
if (initialized == 1)
{
int res = metadata_init_reader->loop();
if (!res)
{
delete metadata_init_reader;
metadata_init_reader = NULL;
journal_init_reader = new blockstore_init_journal(this);
initialized = 2;
}
}
if (initialized == 2)
{
int res = journal_init_reader->loop();
if (!res)
{
delete journal_init_reader;
journal_init_reader = NULL;
initialized = 10;
ringloop->wakeup();
}
}
}
else
{
// try to submit ops
unsigned initial_ring_space = ringloop->space_left();
auto cur_sync = in_progress_syncs.begin();
while (cur_sync != in_progress_syncs.end())
{
continue_sync(*cur_sync++);
}
auto cur = submit_queue.begin();
int has_writes = 0;
while (cur != submit_queue.end())
{
auto op_ptr = cur;
auto op = *(cur++);
// FIXME: This needs some simplification
// Writes should not block reads if the ring is not full and reads don't depend on them
// In all other cases we should stop submission
if (PRIV(op)->wait_for)
{
check_wait(op);
#ifdef BLOCKSTORE_DEBUG
if (PRIV(op)->wait_for)
{
printf("still waiting for %d\n", PRIV(op)->wait_for);
}
#endif
if (PRIV(op)->wait_for == WAIT_SQE)
{
break;
}
else if (PRIV(op)->wait_for)
{
if (op->opcode == BS_OP_WRITE || op->opcode == BS_OP_DELETE)
{
has_writes = 2;
}
continue;
}
}
unsigned ring_space = ringloop->space_left();
unsigned prev_sqe_pos = ringloop->save();
int dequeue_op = 0;
if (op->opcode == BS_OP_READ)
{
dequeue_op = dequeue_read(op);
}
else if (op->opcode == BS_OP_WRITE || op->opcode == BS_OP_DELETE)
{
if (has_writes == 2)
{
// Some writes could not be submitted
break;
}
dequeue_op = dequeue_write(op);
has_writes = dequeue_op ? 1 : 2;
}
else if (op->opcode == BS_OP_SYNC)
{
// wait for all small writes to be submitted
// wait for all big writes to complete, submit data device fsync
// wait for the data device fsync to complete, then submit journal writes for big writes
// then submit an fsync operation
if (has_writes)
{
// Can't submit SYNC before previous writes
continue;
}
dequeue_op = dequeue_sync(op);
}
else if (op->opcode == BS_OP_STABLE)
{
dequeue_op = dequeue_stable(op);
}
else if (op->opcode == BS_OP_ROLLBACK)
{
dequeue_op = dequeue_rollback(op);
}
else if (op->opcode == BS_OP_LIST)
{
process_list(op);
dequeue_op = true;
}
if (dequeue_op)
{
submit_queue.erase(op_ptr);
}
else
{
ringloop->restore(prev_sqe_pos);
if (PRIV(op)->wait_for == WAIT_SQE)
{
PRIV(op)->wait_detail = 1 + ring_space;
// ring is full, stop submission
break;
}
}
}
if (!readonly)
{
flusher->loop();
}
int ret = ringloop->submit();
if (ret < 0)
{
throw std::runtime_error(std::string("io_uring_submit: ") + strerror(-ret));
}
if ((initial_ring_space - ringloop->space_left()) > 0)
{
live = true;
}
queue_stall = !live && !ringloop->get_loop_again();
live = false;
}
}
bool blockstore_impl_t::is_safe_to_stop()
{
// It's safe to stop blockstore when there are no in-flight operations,
// no in-progress syncs and flusher isn't doing anything
if (submit_queue.size() > 0 || in_progress_syncs.size() > 0 || !readonly && flusher->is_active())
{
return false;
}
if (unsynced_big_writes.size() > 0 || unsynced_small_writes.size() > 0)
{
if (!readonly && !stop_sync_submitted)
{
// We should sync the blockstore before unmounting
blockstore_op_t *op = new blockstore_op_t;
op->opcode = BS_OP_SYNC;
op->buf = NULL;
op->callback = [](blockstore_op_t *op)
{
delete op;
};
enqueue_op(op);
stop_sync_submitted = true;
}
return false;
}
return true;
}
void blockstore_impl_t::check_wait(blockstore_op_t *op)
{
if (PRIV(op)->wait_for == WAIT_SQE)
{
if (ringloop->space_left() < PRIV(op)->wait_detail)
{
// stop submission if there's still no free space
return;
}
PRIV(op)->wait_for = 0;
}
else if (PRIV(op)->wait_for == WAIT_IN_FLIGHT)
{
auto dirty_it = dirty_db.find((obj_ver_id){
.oid = op->oid,
.version = PRIV(op)->wait_detail,
});
if (dirty_it != dirty_db.end() && IS_IN_FLIGHT(dirty_it->second.state))
{
// do not submit
return;
}
PRIV(op)->wait_for = 0;
}
else if (PRIV(op)->wait_for == WAIT_JOURNAL)
{
if (journal.used_start == PRIV(op)->wait_detail)
{
// do not submit
return;
}
PRIV(op)->wait_for = 0;
}
else if (PRIV(op)->wait_for == WAIT_JOURNAL_BUFFER)
{
int next = ((journal.cur_sector + 1) % journal.sector_count);
if (journal.sector_info[next].usage_count > 0 ||
journal.sector_info[next].dirty)
{
// do not submit
return;
}
PRIV(op)->wait_for = 0;
}
else if (PRIV(op)->wait_for == WAIT_FREE)
{
if (!data_alloc->get_free_count() && !flusher->is_active())
{
return;
}
PRIV(op)->wait_for = 0;
}
else
{
throw std::runtime_error("BUG: op->wait_for value is unexpected");
}
}
void blockstore_impl_t::enqueue_op(blockstore_op_t *op, bool first)
{
if (op->opcode < BS_OP_MIN || op->opcode > BS_OP_MAX ||
((op->opcode == BS_OP_READ || op->opcode == BS_OP_WRITE) && (
op->offset >= block_size ||
op->len > block_size-op->offset ||
(op->len % disk_alignment)
)) ||
readonly && op->opcode != BS_OP_READ ||
first && op->opcode == BS_OP_WRITE)
{
// Basic verification not passed
op->retval = -EINVAL;
op->callback(op);
return;
}
if (op->opcode == BS_OP_SYNC_STAB_ALL)
{
std::function<void(blockstore_op_t*)> *old_callback = new std::function<void(blockstore_op_t*)>(op->callback);
op->opcode = BS_OP_SYNC;
op->callback = [this, old_callback](blockstore_op_t *op)
{
if (op->retval >= 0 && unstable_writes.size() > 0)
{
op->opcode = BS_OP_STABLE;
op->len = unstable_writes.size();
obj_ver_id *vers = new obj_ver_id[op->len];
op->buf = vers;
int i = 0;
for (auto it = unstable_writes.begin(); it != unstable_writes.end(); it++, i++)
{
vers[i] = {
.oid = it->first,
.version = it->second,
};
}
unstable_writes.clear();
op->callback = [this, old_callback](blockstore_op_t *op)
{
obj_ver_id *vers = (obj_ver_id*)op->buf;
delete[] vers;
op->buf = NULL;
(*old_callback)(op);
delete old_callback;
};
this->enqueue_op(op);
}
else
{
(*old_callback)(op);
delete old_callback;
}
};
}
if (op->opcode == BS_OP_WRITE && !enqueue_write(op))
{
op->callback(op);
return;
}
if (0 && op->opcode == BS_OP_SYNC && immediate_commit)
{
op->retval = 0;
op->callback(op);
return;
}
// Call constructor without allocating memory. We'll call destructor before returning op back
new ((void*)op->private_data) blockstore_op_private_t;
PRIV(op)->wait_for = 0;
PRIV(op)->sync_state = 0;
PRIV(op)->pending_ops = 0;
if (!first)
{
submit_queue.push_back(op);
}
else
{
submit_queue.push_front(op);
}
ringloop->wakeup();
}
void blockstore_impl_t::process_list(blockstore_op_t *op)
{
// Count objects
uint32_t list_pg = op->offset;
uint32_t pg_count = op->len;
uint64_t parity_block_size = op->oid.stripe;
if (pg_count != 0 && (parity_block_size < MIN_BLOCK_SIZE || list_pg >= pg_count))
{
op->retval = -EINVAL;
FINISH_OP(op);
return;
}
uint64_t stable_count = 0;
if (pg_count > 0)
{
for (auto it = clean_db.begin(); it != clean_db.end(); it++)
{
uint32_t pg = (it->first.inode + it->first.stripe / parity_block_size) % pg_count;
if (pg == list_pg)
{
stable_count++;
}
}
}
else
{
stable_count = clean_db.size();
}
uint64_t total_count = stable_count;
for (auto it = dirty_db.begin(); it != dirty_db.end(); it++)
{
if (!pg_count || ((it->first.oid.inode + it->first.oid.stripe / parity_block_size) % pg_count) == list_pg)
{
if (IS_STABLE(it->second.state))
{
stable_count++;
}
total_count++;
}
}
// Allocate memory
op->version = stable_count;
op->retval = total_count;
op->buf = malloc(sizeof(obj_ver_id) * total_count);
if (!op->buf)
{
op->retval = -ENOMEM;
FINISH_OP(op);
return;
}
obj_ver_id *vers = (obj_ver_id*)op->buf;
int i = 0;
for (auto it = clean_db.begin(); it != clean_db.end(); it++)
{
if (!pg_count || ((it->first.inode + it->first.stripe / parity_block_size) % pg_count) == list_pg)
{
vers[i++] = {
.oid = it->first,
.version = it->second.version,
};
}
}
int j = stable_count;
for (auto it = dirty_db.begin(); it != dirty_db.end(); it++)
{
if (!pg_count || ((it->first.oid.inode + it->first.oid.stripe / parity_block_size) % pg_count) == list_pg)
{
if (IS_STABLE(it->second.state))
{
vers[i++] = it->first;
}
else
{
vers[j++] = it->first;
}
}
}
FINISH_OP(op);
}

View File

@ -1,186 +0,0 @@
#include "blockstore_impl.h"
blockstore_journal_check_t::blockstore_journal_check_t(blockstore_impl_t *bs)
{
this->bs = bs;
sectors_required = 0;
next_pos = bs->journal.next_free;
next_sector = bs->journal.cur_sector;
next_in_pos = bs->journal.in_sector_pos;
right_dir = next_pos >= bs->journal.used_start;
}
// Check if we can write <required> entries of <size> bytes and <data_after> data bytes after them to the journal
int blockstore_journal_check_t::check_available(blockstore_op_t *op, int required, int size, int data_after)
{
while (1)
{
int fits = (bs->journal.block_size - next_in_pos) / size;
if (fits > 0)
{
required -= fits;
next_in_pos += fits * size;
sectors_required++;
}
else if (bs->journal.sector_info[next_sector].dirty)
{
// sectors_required is more like "sectors to write"
sectors_required++;
}
if (required <= 0)
{
break;
}
next_pos = next_pos + bs->journal.block_size;
if (next_pos >= bs->journal.len)
{
next_pos = bs->journal.block_size;
right_dir = false;
}
next_in_pos = 0;
if (bs->journal.sector_info[next_sector].usage_count > 0 ||
bs->journal.sector_info[next_sector].dirty)
{
next_sector = ((next_sector + 1) % bs->journal.sector_count);
}
if (bs->journal.sector_info[next_sector].usage_count > 0 ||
bs->journal.sector_info[next_sector].dirty)
{
// No memory buffer available. Wait for it.
#ifdef BLOCKSTORE_DEBUG
printf("next journal buffer %d is still dirty=%d used=%d\n", next_sector,
bs->journal.sector_info[next_sector].dirty, bs->journal.sector_info[next_sector].usage_count);
#endif
PRIV(op)->wait_for = WAIT_JOURNAL_BUFFER;
return 0;
}
}
if (data_after > 0)
{
next_pos = next_pos + data_after;
if (next_pos > bs->journal.len)
{
next_pos = bs->journal.block_size + data_after;
right_dir = false;
}
}
if (!right_dir && next_pos >= bs->journal.used_start-bs->journal.block_size)
{
// No space in the journal. Wait until used_start changes.
printf(
"Ran out of journal space (free space: %lu bytes)\n",
(bs->journal.next_free >= bs->journal.used_start
? bs->journal.len-bs->journal.block_size - (bs->journal.next_free-bs->journal.used_start)
: bs->journal.used_start - bs->journal.next_free)
);
PRIV(op)->wait_for = WAIT_JOURNAL;
bs->flusher->force_start();
PRIV(op)->wait_detail = bs->journal.used_start;
return 0;
}
return 1;
}
journal_entry* prefill_single_journal_entry(journal_t & journal, uint16_t type, uint32_t size)
{
if (journal.block_size - journal.in_sector_pos < size)
{
assert(!journal.sector_info[journal.cur_sector].dirty);
// Move to the next journal sector
if (journal.sector_info[journal.cur_sector].usage_count > 0)
{
// Also select next sector buffer in memory
journal.cur_sector = ((journal.cur_sector + 1) % journal.sector_count);
}
journal.sector_info[journal.cur_sector].offset = journal.next_free;
journal.in_sector_pos = 0;
journal.next_free = (journal.next_free+journal.block_size) < journal.len ? journal.next_free + journal.block_size : journal.block_size;
memset(journal.inmemory
? journal.buffer + journal.sector_info[journal.cur_sector].offset
: journal.sector_buf + journal.block_size*journal.cur_sector, 0, journal.block_size);
}
journal_entry *je = (struct journal_entry*)(
(journal.inmemory
? journal.buffer + journal.sector_info[journal.cur_sector].offset
: journal.sector_buf + journal.block_size*journal.cur_sector) + journal.in_sector_pos
);
journal.in_sector_pos += size;
je->magic = JOURNAL_MAGIC;
je->type = type;
je->size = size;
je->crc32_prev = journal.crc32_last;
journal.sector_info[journal.cur_sector].dirty = true;
return je;
}
void prepare_journal_sector_write(journal_t & journal, int cur_sector, io_uring_sqe *sqe, std::function<void(ring_data_t*)> cb)
{
journal.sector_info[cur_sector].dirty = false;
journal.sector_info[cur_sector].usage_count++;
ring_data_t *data = ((ring_data_t*)sqe->user_data);
data->iov = (struct iovec){
(journal.inmemory
? journal.buffer + journal.sector_info[cur_sector].offset
: journal.sector_buf + journal.block_size*cur_sector),
journal.block_size
};
data->callback = cb;
my_uring_prep_writev(
sqe, journal.fd, &data->iov, 1, journal.offset + journal.sector_info[cur_sector].offset
);
}
journal_t::~journal_t()
{
if (sector_buf)
free(sector_buf);
if (sector_info)
free(sector_info);
if (buffer)
free(buffer);
sector_buf = NULL;
sector_info = NULL;
buffer = NULL;
}
bool journal_t::trim()
{
auto journal_used_it = used_sectors.lower_bound(used_start);
#ifdef BLOCKSTORE_DEBUG
printf(
"Trimming journal (used_start=%lu, next_free=%lu, first_used=%lu, usage_count=%lu)\n",
used_start, next_free,
journal_used_it == used_sectors.end() ? 0 : journal_used_it->first,
journal_used_it == used_sectors.end() ? 0 : journal_used_it->second
);
#endif
if (journal_used_it == used_sectors.end())
{
// Journal is cleared to its end, restart from the beginning
journal_used_it = used_sectors.begin();
if (journal_used_it == used_sectors.end())
{
// Journal is empty
used_start = next_free;
}
else
{
used_start = journal_used_it->first;
// next_free does not need updating here
}
}
else if (journal_used_it->first > used_start)
{
// Journal is cleared up to <journal_used_it>
used_start = journal_used_it->first;
}
else
{
// Can't trim journal
return false;
}
#ifdef BLOCKSTORE_DEBUG
printf("Journal trimmed to %lu (next_free=%lu)\n", used_start, next_free);
#endif
return true;
}

View File

@ -1,187 +0,0 @@
#include "blockstore_impl.h"
int blockstore_impl_t::dequeue_rollback(blockstore_op_t *op)
{
obj_ver_id* v;
int i, todo = op->len;
for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
{
// Check that there are some versions greater than v->version (which may be zero),
// check that they're unstable, synced, and not currently written to
auto dirty_it = dirty_db.lower_bound((obj_ver_id){
.oid = v->oid,
.version = UINT64_MAX,
});
if (dirty_it == dirty_db.begin())
{
bad_op:
op->retval = -EINVAL;
FINISH_OP(op);
return 1;
}
else
{
dirty_it--;
if (dirty_it->first.oid != v->oid || dirty_it->first.version < v->version)
{
goto bad_op;
}
while (dirty_it->first.oid == v->oid && dirty_it->first.version > v->version)
{
if (!IS_SYNCED(dirty_it->second.state) ||
IS_STABLE(dirty_it->second.state))
{
goto bad_op;
}
if (dirty_it == dirty_db.begin())
{
break;
}
dirty_it--;
}
}
}
// Check journal space
blockstore_journal_check_t space_check(this);
if (!space_check.check_available(op, todo, sizeof(journal_entry_rollback), 0))
{
return 0;
}
// There is sufficient space. Get SQEs
struct io_uring_sqe *sqe[space_check.sectors_required];
for (i = 0; i < space_check.sectors_required; i++)
{
BS_SUBMIT_GET_SQE_DECL(sqe[i]);
}
// Prepare and submit journal entries
auto cb = [this, op](ring_data_t *data) { handle_rollback_event(data, op); };
int s = 0, cur_sector = -1;
if ((journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_rollback) &&
journal.sector_info[journal.cur_sector].dirty)
{
if (cur_sector == -1)
PRIV(op)->min_used_journal_sector = 1 + journal.cur_sector;
cur_sector = journal.cur_sector;
prepare_journal_sector_write(journal, cur_sector, sqe[s++], cb);
}
for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
{
// FIXME This is here only for the purpose of tracking unstable_writes. Remove if not required
// FIXME ...aaaand this is similar to blockstore_init.cpp - maybe dedup it?
auto dirty_it = dirty_db.lower_bound((obj_ver_id){
.oid = v->oid,
.version = UINT64_MAX,
});
uint64_t max_unstable = 0;
while (dirty_it != dirty_db.begin())
{
dirty_it--;
if (dirty_it->first.oid != v->oid)
break;
else if (dirty_it->first.version <= v->version)
{
if (!IS_STABLE(dirty_it->second.state))
max_unstable = dirty_it->first.version;
break;
}
}
auto unstab_it = unstable_writes.find(v->oid);
if (unstab_it != unstable_writes.end())
{
if (max_unstable == 0)
unstable_writes.erase(unstab_it);
else
unstab_it->second = max_unstable;
}
journal_entry_rollback *je = (journal_entry_rollback*)
prefill_single_journal_entry(journal, JE_ROLLBACK, sizeof(journal_entry_rollback));
journal.sector_info[journal.cur_sector].dirty = false;
je->oid = v->oid;
je->version = v->version;
je->crc32 = je_crc32((journal_entry*)je);
journal.crc32_last = je->crc32;
if (cur_sector != journal.cur_sector)
{
if (cur_sector == -1)
PRIV(op)->min_used_journal_sector = 1 + journal.cur_sector;
cur_sector = journal.cur_sector;
prepare_journal_sector_write(journal, cur_sector, sqe[s++], cb);
}
}
PRIV(op)->max_used_journal_sector = 1 + journal.cur_sector;
PRIV(op)->pending_ops = s;
return 1;
}
void blockstore_impl_t::handle_rollback_event(ring_data_t *data, blockstore_op_t *op)
{
live = true;
if (data->res != data->iov.iov_len)
{
throw std::runtime_error(
"write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
"). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
);
}
PRIV(op)->pending_ops--;
if (PRIV(op)->pending_ops == 0)
{
// Release used journal sectors
release_journal_sectors(op);
obj_ver_id* v;
int i;
for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
{
// Erase dirty_db entries
auto rm_end = dirty_db.lower_bound((obj_ver_id){
.oid = v->oid,
.version = UINT64_MAX,
});
rm_end--;
auto rm_start = rm_end;
while (1)
{
if (rm_end->first.oid != v->oid)
break;
else if (rm_end->first.version <= v->version)
break;
rm_start = rm_end;
if (rm_end == dirty_db.begin())
break;
rm_end--;
}
if (rm_end != rm_start)
erase_dirty(rm_start, rm_end, UINT64_MAX);
}
journal.trim();
// Acknowledge op
op->retval = 0;
FINISH_OP(op);
}
}
void blockstore_impl_t::erase_dirty(blockstore_dirty_db_t::iterator dirty_start, blockstore_dirty_db_t::iterator dirty_end, uint64_t clean_loc)
{
auto dirty_it = dirty_end;
while (dirty_it != dirty_start)
{
dirty_it--;
if (IS_BIG_WRITE(dirty_it->second.state) && dirty_it->second.location != clean_loc)
{
#ifdef BLOCKSTORE_DEBUG
printf("Free block %lu\n", dirty_it->second.location >> block_order);
#endif
data_alloc->set(dirty_it->second.location >> block_order, false);
}
#ifdef BLOCKSTORE_DEBUG
printf("remove usage of journal offset %lu by %lu:%lu v%lu\n", dirty_it->second.journal_sector,
dirty_it->first.oid.inode, dirty_it->first.oid.stripe, dirty_it->first.version);
#endif
int used = --journal.used_sectors[dirty_it->second.journal_sector];
if (used == 0)
{
journal.used_sectors.erase(dirty_it->second.journal_sector);
}
}
dirty_db.erase(dirty_start, dirty_end);
}

View File

@ -1,195 +0,0 @@
#include "blockstore_impl.h"
// Stabilize small write:
// 1) Copy data from the journal to the data device
// 2) Increase version on the metadata device and sync it
// 3) Advance clean_db entry's version, clear previous journal entries
//
// This makes 1 4K small write+sync look like:
// 512b+4K (journal) + sync + 512b (journal) + sync + 4K (data) [+ sync?] + 512b (metadata) + sync.
// WA = 2.375. It's not the best, SSD FTL-like redirect-write could probably be lower
// even with defragmentation. But it's fixed and it's still better than in Ceph. :)
// except for HDD-only clusters, because each write results in 3 seeks.
// Stabilize big write:
// 1) Copy metadata from the journal to the metadata device
// 2) Move dirty_db entry to clean_db and clear previous journal entries
//
// This makes 1 128K big write+sync look like:
// 128K (data) + sync + 512b (journal) + sync + 512b (journal) + sync + 512b (metadata) + sync.
// WA = 1.012. Very good :)
// Stabilize delete:
// 1) Remove metadata entry and sync it
// 2) Remove dirty_db entry and clear previous journal entries
// We have 2 problems here:
// - In the cluster environment, we must store the "tombstones" of deleted objects until
// all replicas (not just quorum) agrees about their deletion. That is, "stabilize" is
// not possible for deletes in degraded placement groups
// - With simple "fixed" metadata tables we can't just clear the metadata entry of the latest
// object version. We must clear all previous entries, too.
// FIXME Fix both problems - probably, by switching from "fixed" metadata tables to "dynamic"
// AND We must do it in batches, for the sake of reduced fsync call count
// AND We must know what we stabilize. Basic workflow is like:
// 1) primary OSD receives sync request
// 2) it submits syncs to blockstore and peers
// 3) after everyone acks sync it acks sync to the client
// 4) after a while it takes his synced object list and sends stabilize requests
// to peers and to its own blockstore, thus freeing the old version
int blockstore_impl_t::dequeue_stable(blockstore_op_t *op)
{
obj_ver_id* v;
int i, todo = 0;
for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
{
auto dirty_it = dirty_db.find(*v);
if (dirty_it == dirty_db.end())
{
auto clean_it = clean_db.find(v->oid);
if (clean_it == clean_db.end() || clean_it->second.version < v->version)
{
// No such object version
op->retval = -EINVAL;
FINISH_OP(op);
return 1;
}
else
{
// Already stable
}
}
else if (IS_UNSYNCED(dirty_it->second.state))
{
// Object not synced yet. Caller must sync it first
op->retval = EAGAIN;
FINISH_OP(op);
return 1;
}
else if (!IS_STABLE(dirty_it->second.state))
{
todo++;
}
}
if (!todo)
{
// Already stable
op->retval = 0;
FINISH_OP(op);
return 1;
}
// Check journal space
blockstore_journal_check_t space_check(this);
if (!space_check.check_available(op, todo, sizeof(journal_entry_stable), 0))
{
return 0;
}
// There is sufficient space. Get SQEs
struct io_uring_sqe *sqe[space_check.sectors_required];
for (i = 0; i < space_check.sectors_required; i++)
{
BS_SUBMIT_GET_SQE_DECL(sqe[i]);
}
// Prepare and submit journal entries
auto cb = [this, op](ring_data_t *data) { handle_stable_event(data, op); };
int s = 0, cur_sector = -1;
if ((journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_stable) &&
journal.sector_info[journal.cur_sector].dirty)
{
if (cur_sector == -1)
PRIV(op)->min_used_journal_sector = 1 + journal.cur_sector;
cur_sector = journal.cur_sector;
prepare_journal_sector_write(journal, cur_sector, sqe[s++], cb);
}
for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
{
auto unstab_it = unstable_writes.find(v->oid);
if (unstab_it != unstable_writes.end() &&
unstab_it->second <= v->version)
{
unstable_writes.erase(unstab_it);
}
journal_entry_stable *je = (journal_entry_stable*)
prefill_single_journal_entry(journal, JE_STABLE, sizeof(journal_entry_stable));
journal.sector_info[journal.cur_sector].dirty = false;
je->oid = v->oid;
je->version = v->version;
je->crc32 = je_crc32((journal_entry*)je);
journal.crc32_last = je->crc32;
if (cur_sector != journal.cur_sector)
{
if (cur_sector == -1)
PRIV(op)->min_used_journal_sector = 1 + journal.cur_sector;
cur_sector = journal.cur_sector;
prepare_journal_sector_write(journal, cur_sector, sqe[s++], cb);
}
}
PRIV(op)->max_used_journal_sector = 1 + journal.cur_sector;
PRIV(op)->pending_ops = s;
return 1;
}
void blockstore_impl_t::handle_stable_event(ring_data_t *data, blockstore_op_t *op)
{
live = true;
if (data->res != data->iov.iov_len)
{
throw std::runtime_error(
"write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
"). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
);
}
PRIV(op)->pending_ops--;
if (PRIV(op)->pending_ops == 0)
{
// Release used journal sectors
release_journal_sectors(op);
// Mark dirty_db entries as stable, acknowledge op completion
obj_ver_id* v;
int i;
for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
{
// Mark all dirty_db entries up to op->version as stable
auto dirty_it = dirty_db.find(*v);
if (dirty_it != dirty_db.end())
{
while (1)
{
if (dirty_it->second.state == ST_J_SYNCED)
{
dirty_it->second.state = ST_J_STABLE;
}
else if (dirty_it->second.state == ST_D_META_SYNCED)
{
dirty_it->second.state = ST_D_STABLE;
}
else if (dirty_it->second.state == ST_DEL_SYNCED)
{
dirty_it->second.state = ST_DEL_STABLE;
}
else if (IS_STABLE(dirty_it->second.state))
{
break;
}
if (dirty_it == dirty_db.begin())
{
break;
}
dirty_it--;
if (dirty_it->first.oid != v->oid)
{
break;
}
}
#ifdef BLOCKSTORE_DEBUG
printf("enqueue_flush %lu:%lu v%lu\n", v->oid.inode, v->oid.stripe, v->version);
#endif
flusher->enqueue_flush(*v);
}
}
// Acknowledge op
op->retval = 0;
FINISH_OP(op);
}
}

View File

@ -1,269 +0,0 @@
#include "blockstore_impl.h"
#define SYNC_HAS_SMALL 1
#define SYNC_HAS_BIG 2
#define SYNC_DATA_SYNC_SENT 3
#define SYNC_DATA_SYNC_DONE 4
#define SYNC_JOURNAL_WRITE_SENT 5
#define SYNC_JOURNAL_WRITE_DONE 6
#define SYNC_JOURNAL_SYNC_SENT 7
#define SYNC_DONE 8
int blockstore_impl_t::dequeue_sync(blockstore_op_t *op)
{
if (PRIV(op)->sync_state == 0)
{
stop_sync_submitted = false;
PRIV(op)->sync_big_writes.swap(unsynced_big_writes);
PRIV(op)->sync_small_writes.swap(unsynced_small_writes);
PRIV(op)->sync_small_checked = 0;
PRIV(op)->sync_big_checked = 0;
unsynced_big_writes.clear();
unsynced_small_writes.clear();
if (PRIV(op)->sync_big_writes.size() > 0)
PRIV(op)->sync_state = SYNC_HAS_BIG;
else if (PRIV(op)->sync_small_writes.size() > 0)
PRIV(op)->sync_state = SYNC_HAS_SMALL;
else
PRIV(op)->sync_state = SYNC_DONE;
// Always add sync to in_progress_syncs because we clear unsynced_big_writes and unsynced_small_writes
PRIV(op)->prev_sync_count = in_progress_syncs.size();
PRIV(op)->in_progress_ptr = in_progress_syncs.insert(in_progress_syncs.end(), op);
}
continue_sync(op);
// Always dequeue because we always add syncs to in_progress_syncs
return 1;
}
int blockstore_impl_t::continue_sync(blockstore_op_t *op)
{
auto cb = [this, op](ring_data_t *data) { handle_sync_event(data, op); };
if (PRIV(op)->sync_state == SYNC_HAS_SMALL)
{
// No big writes, just fsync the journal
for (; PRIV(op)->sync_small_checked < PRIV(op)->sync_small_writes.size(); PRIV(op)->sync_small_checked++)
{
if (IS_IN_FLIGHT(dirty_db[PRIV(op)->sync_small_writes[PRIV(op)->sync_small_checked]].state))
{
// Wait for small inflight writes to complete
return 0;
}
}
if (journal.sector_info[journal.cur_sector].dirty)
{
// Write out the last journal sector if it happens to be dirty
BS_SUBMIT_GET_ONLY_SQE(sqe);
prepare_journal_sector_write(journal, journal.cur_sector, sqe, cb);
PRIV(op)->min_used_journal_sector = PRIV(op)->max_used_journal_sector = 1 + journal.cur_sector;
PRIV(op)->pending_ops = 1;
PRIV(op)->sync_state = SYNC_JOURNAL_WRITE_SENT;
return 1;
}
else
{
PRIV(op)->sync_state = SYNC_JOURNAL_WRITE_DONE;
}
}
if (PRIV(op)->sync_state == SYNC_HAS_BIG)
{
for (; PRIV(op)->sync_big_checked < PRIV(op)->sync_big_writes.size(); PRIV(op)->sync_big_checked++)
{
if (IS_IN_FLIGHT(dirty_db[PRIV(op)->sync_big_writes[PRIV(op)->sync_big_checked]].state))
{
// Wait for big inflight writes to complete
return 0;
}
}
// 1st step: fsync data
if (!disable_data_fsync)
{
BS_SUBMIT_GET_SQE(sqe, data);
my_uring_prep_fsync(sqe, data_fd, IORING_FSYNC_DATASYNC);
data->iov = { 0 };
data->callback = cb;
PRIV(op)->min_used_journal_sector = PRIV(op)->max_used_journal_sector = 0;
PRIV(op)->pending_ops = 1;
PRIV(op)->sync_state = SYNC_DATA_SYNC_SENT;
return 1;
}
else
{
PRIV(op)->sync_state = SYNC_DATA_SYNC_DONE;
}
}
if (PRIV(op)->sync_state == SYNC_DATA_SYNC_DONE)
{
for (; PRIV(op)->sync_small_checked < PRIV(op)->sync_small_writes.size(); PRIV(op)->sync_small_checked++)
{
if (IS_IN_FLIGHT(dirty_db[PRIV(op)->sync_small_writes[PRIV(op)->sync_small_checked]].state))
{
// Wait for small inflight writes to complete
return 0;
}
}
// 2nd step: Data device is synced, prepare & write journal entries
// Check space in the journal and journal memory buffers
blockstore_journal_check_t space_check(this);
if (!space_check.check_available(op, PRIV(op)->sync_big_writes.size(), sizeof(journal_entry_big_write), 0))
{
return 0;
}
// Get SQEs. Don't bother about merging, submit each journal sector as a separate request
struct io_uring_sqe *sqe[space_check.sectors_required];
for (int i = 0; i < space_check.sectors_required; i++)
{
BS_SUBMIT_GET_SQE_DECL(sqe[i]);
}
// Prepare and submit journal entries
auto it = PRIV(op)->sync_big_writes.begin();
int s = 0, cur_sector = -1;
if ((journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_big_write) &&
journal.sector_info[journal.cur_sector].dirty)
{
if (cur_sector == -1)
PRIV(op)->min_used_journal_sector = 1 + journal.cur_sector;
cur_sector = journal.cur_sector;
prepare_journal_sector_write(journal, cur_sector, sqe[s++], cb);
}
while (it != PRIV(op)->sync_big_writes.end())
{
journal_entry_big_write *je = (journal_entry_big_write*)
prefill_single_journal_entry(journal, JE_BIG_WRITE, sizeof(journal_entry_big_write));
dirty_db[*it].journal_sector = journal.sector_info[journal.cur_sector].offset;
journal.sector_info[journal.cur_sector].dirty = false;
journal.used_sectors[journal.sector_info[journal.cur_sector].offset]++;
#ifdef BLOCKSTORE_DEBUG
printf("journal offset %lu is used by %lu:%lu v%lu\n", dirty_db[*it].journal_sector, it->oid.inode, it->oid.stripe, it->version);
#endif
je->oid = it->oid;
je->version = it->version;
je->offset = dirty_db[*it].offset;
je->len = dirty_db[*it].len;
je->location = dirty_db[*it].location;
je->crc32 = je_crc32((journal_entry*)je);
journal.crc32_last = je->crc32;
it++;
if (cur_sector != journal.cur_sector)
{
if (cur_sector == -1)
PRIV(op)->min_used_journal_sector = 1 + journal.cur_sector;
cur_sector = journal.cur_sector;
prepare_journal_sector_write(journal, cur_sector, sqe[s++], cb);
}
}
PRIV(op)->max_used_journal_sector = 1 + journal.cur_sector;
PRIV(op)->pending_ops = s;
PRIV(op)->sync_state = SYNC_JOURNAL_WRITE_SENT;
return 1;
}
if (PRIV(op)->sync_state == SYNC_JOURNAL_WRITE_DONE)
{
if (!disable_journal_fsync)
{
BS_SUBMIT_GET_SQE(sqe, data);
my_uring_prep_fsync(sqe, journal.fd, IORING_FSYNC_DATASYNC);
data->iov = { 0 };
data->callback = cb;
PRIV(op)->pending_ops = 1;
PRIV(op)->sync_state = SYNC_JOURNAL_SYNC_SENT;
return 1;
}
else
{
PRIV(op)->sync_state = SYNC_DONE;
}
}
if (PRIV(op)->sync_state == SYNC_DONE)
{
ack_sync(op);
}
return 1;
}
void blockstore_impl_t::handle_sync_event(ring_data_t *data, blockstore_op_t *op)
{
live = true;
if (data->res != data->iov.iov_len)
{
throw std::runtime_error(
"write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
"). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
);
}
PRIV(op)->pending_ops--;
if (PRIV(op)->pending_ops == 0)
{
// Release used journal sectors
release_journal_sectors(op);
// Handle states
if (PRIV(op)->sync_state == SYNC_DATA_SYNC_SENT)
{
PRIV(op)->sync_state = SYNC_DATA_SYNC_DONE;
}
else if (PRIV(op)->sync_state == SYNC_JOURNAL_WRITE_SENT)
{
PRIV(op)->sync_state = SYNC_JOURNAL_WRITE_DONE;
}
else if (PRIV(op)->sync_state == SYNC_JOURNAL_SYNC_SENT)
{
PRIV(op)->sync_state = SYNC_DONE;
ack_sync(op);
}
else
{
throw std::runtime_error("BUG: unexpected sync op state");
}
}
}
int blockstore_impl_t::ack_sync(blockstore_op_t *op)
{
if (PRIV(op)->sync_state == SYNC_DONE && PRIV(op)->prev_sync_count == 0)
{
// Remove dependency of subsequent syncs
auto it = PRIV(op)->in_progress_ptr;
int done_syncs = 1;
++it;
// Acknowledge sync
ack_one_sync(op);
while (it != in_progress_syncs.end())
{
auto & next_sync = *it++;
PRIV(next_sync)->prev_sync_count -= done_syncs;
if (PRIV(next_sync)->prev_sync_count == 0 && PRIV(next_sync)->sync_state == SYNC_DONE)
{
done_syncs++;
// Acknowledge next_sync
ack_one_sync(next_sync);
}
}
return 1;
}
return 0;
}
void blockstore_impl_t::ack_one_sync(blockstore_op_t *op)
{
// Handle states
for (auto it = PRIV(op)->sync_big_writes.begin(); it != PRIV(op)->sync_big_writes.end(); it++)
{
#ifdef BLOCKSTORE_DEBUG
printf("Ack sync big %lu:%lu v%lu\n", it->oid.inode, it->oid.stripe, it->version);
#endif
auto & unstab = unstable_writes[it->oid];
unstab = unstab < it->version ? it->version : unstab;
dirty_db[*it].state = ST_D_META_SYNCED;
}
for (auto it = PRIV(op)->sync_small_writes.begin(); it != PRIV(op)->sync_small_writes.end(); it++)
{
#ifdef BLOCKSTORE_DEBUG
printf("Ack sync small %lu:%lu v%lu\n", it->oid.inode, it->oid.stripe, it->version);
#endif
auto & unstab = unstable_writes[it->oid];
unstab = unstab < it->version ? it->version : unstab;
dirty_db[*it].state = dirty_db[*it].state == ST_DEL_WRITTEN ? ST_DEL_SYNCED : ST_J_SYNCED;
}
in_progress_syncs.erase(PRIV(op)->in_progress_ptr);
op->retval = 0;
FINISH_OP(op);
}

View File

@ -1,328 +0,0 @@
#include "blockstore_impl.h"
bool blockstore_impl_t::enqueue_write(blockstore_op_t *op)
{
// Check or assign version number
bool found = false, deleted = false, is_del = (op->opcode == BS_OP_DELETE);
uint64_t version = 1;
if (dirty_db.size() > 0)
{
auto dirty_it = dirty_db.upper_bound((obj_ver_id){
.oid = op->oid,
.version = UINT64_MAX,
});
dirty_it--; // segfaults when dirty_db is empty
if (dirty_it != dirty_db.end() && dirty_it->first.oid == op->oid)
{
found = true;
version = dirty_it->first.version + 1;
deleted = IS_DELETE(dirty_it->second.state);
}
}
if (!found)
{
auto clean_it = clean_db.find(op->oid);
if (clean_it != clean_db.end())
{
version = clean_it->second.version + 1;
}
else
{
deleted = true;
}
}
if (op->version == 0)
{
op->version = version;
}
else if (op->version < version)
{
// Invalid version requested
op->retval = -EINVAL;
return false;
}
if (deleted && is_del)
{
// Already deleted
op->retval = 0;
return false;
}
// Immediately add the operation into dirty_db, so subsequent reads could see it
#ifdef BLOCKSTORE_DEBUG
printf("%s %lu:%lu v%lu\n", is_del ? "Delete" : "Write", op->oid.inode, op->oid.stripe, op->version);
#endif
dirty_db.emplace((obj_ver_id){
.oid = op->oid,
.version = op->version,
}, (dirty_entry){
.state = (uint32_t)(
is_del
? ST_DEL_IN_FLIGHT
: (op->len == block_size || deleted ? ST_D_IN_FLIGHT : ST_J_IN_FLIGHT)
),
.flags = 0,
.location = 0,
.offset = is_del ? 0 : op->offset,
.len = is_del ? 0 : op->len,
.journal_sector = 0,
});
return true;
}
// First step of the write algorithm: dequeue operation and submit initial write(s)
int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
{
auto dirty_it = dirty_db.find((obj_ver_id){
.oid = op->oid,
.version = op->version,
});
if (dirty_it->second.state == ST_D_IN_FLIGHT)
{
blockstore_journal_check_t space_check(this);
if (!space_check.check_available(op, unsynced_big_writes.size() + 1, sizeof(journal_entry_big_write), JOURNAL_STABILIZE_RESERVATION))
{
return 0;
}
// Big (redirect) write
uint64_t loc = data_alloc->find_free();
if (loc == UINT64_MAX)
{
// no space
if (flusher->is_active())
{
// hope that some space will be available after flush
PRIV(op)->wait_for = WAIT_FREE;
return 0;
}
op->retval = -ENOSPC;
FINISH_OP(op);
return 1;
}
BS_SUBMIT_GET_SQE(sqe, data);
dirty_it->second.location = loc << block_order;
dirty_it->second.state = ST_D_SUBMITTED;
#ifdef BLOCKSTORE_DEBUG
printf("Allocate block %lu\n", loc);
#endif
data_alloc->set(loc, true);
uint64_t stripe_offset = (op->offset % bitmap_granularity);
uint64_t stripe_end = (op->offset + op->len) % bitmap_granularity;
// Zero fill up to bitmap_granularity
int vcnt = 0;
if (stripe_offset)
{
PRIV(op)->iov_zerofill[vcnt++] = (struct iovec){ zero_object, stripe_offset };
}
PRIV(op)->iov_zerofill[vcnt++] = (struct iovec){ op->buf, op->len };
if (stripe_end)
{
stripe_end = bitmap_granularity - stripe_end;
PRIV(op)->iov_zerofill[vcnt++] = (struct iovec){ zero_object, stripe_end };
}
data->iov.iov_len = op->len + stripe_offset + stripe_end; // to check it in the callback
data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
my_uring_prep_writev(
sqe, data_fd, PRIV(op)->iov_zerofill, vcnt, data_offset + (loc << block_order) + op->offset - stripe_offset
);
PRIV(op)->pending_ops = 1;
PRIV(op)->min_used_journal_sector = PRIV(op)->max_used_journal_sector = 0;
// Remember big write as unsynced
unsynced_big_writes.push_back((obj_ver_id){
.oid = op->oid,
.version = op->version,
});
}
else
{
// Small (journaled) write
// First check if the journal has sufficient space
blockstore_journal_check_t space_check(this);
if (unsynced_big_writes.size() && !space_check.check_available(op, unsynced_big_writes.size(), sizeof(journal_entry_big_write), 0)
|| !space_check.check_available(op, 1, sizeof(journal_entry_small_write), op->len + JOURNAL_STABILIZE_RESERVATION))
{
return 0;
}
// There is sufficient space. Get SQE(s)
struct io_uring_sqe *sqe1 = NULL;
if ((journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_small_write) &&
journal.sector_info[journal.cur_sector].dirty)
{
// Write current journal sector only if it's dirty and full
BS_SUBMIT_GET_SQE_DECL(sqe1);
}
struct io_uring_sqe *sqe2 = NULL;
if (op->len > 0)
{
BS_SUBMIT_GET_SQE_DECL(sqe2);
}
// Got SQEs. Prepare previous journal sector write if required
auto cb = [this, op](ring_data_t *data) { handle_write_event(data, op); };
if (sqe1)
{
prepare_journal_sector_write(journal, journal.cur_sector, sqe1, cb);
// FIXME rename to min/max _flushing
PRIV(op)->min_used_journal_sector = PRIV(op)->max_used_journal_sector = 1 + journal.cur_sector;
PRIV(op)->pending_ops++;
}
else
{
PRIV(op)->min_used_journal_sector = PRIV(op)->max_used_journal_sector = 0;
}
// Then pre-fill journal entry
journal_entry_small_write *je = (journal_entry_small_write*)
prefill_single_journal_entry(journal, JE_SMALL_WRITE, sizeof(journal_entry_small_write));
dirty_it->second.journal_sector = journal.sector_info[journal.cur_sector].offset;
journal.used_sectors[journal.sector_info[journal.cur_sector].offset]++;
#ifdef BLOCKSTORE_DEBUG
printf("journal offset %lu is used by %lu:%lu v%lu\n", dirty_it->second.journal_sector, dirty_it->first.oid.inode, dirty_it->first.oid.stripe, dirty_it->first.version);
#endif
// Figure out where data will be
journal.next_free = (journal.next_free + op->len) <= journal.len ? journal.next_free : journal_block_size;
je->oid = op->oid;
je->version = op->version;
je->offset = op->offset;
je->len = op->len;
je->data_offset = journal.next_free;
je->crc32_data = crc32c(0, op->buf, op->len);
je->crc32 = je_crc32((journal_entry*)je);
journal.crc32_last = je->crc32;
if (op->len > 0)
{
// Prepare journal data write
if (journal.inmemory)
{
// Copy data
memcpy(journal.buffer + journal.next_free, op->buf, op->len);
}
ring_data_t *data2 = ((ring_data_t*)sqe2->user_data);
data2->iov = (struct iovec){ op->buf, op->len };
data2->callback = cb;
my_uring_prep_writev(
sqe2, journal.fd, &data2->iov, 1, journal.offset + journal.next_free
);
PRIV(op)->pending_ops++;
}
else
{
// Zero-length overwrite. Allowed to bump object version in EC placement groups without actually writing data
}
dirty_it->second.location = journal.next_free;
dirty_it->second.state = ST_J_SUBMITTED;
journal.next_free += op->len;
if (journal.next_free >= journal.len)
{
journal.next_free = journal_block_size;
}
// Remember small write as unsynced
unsynced_small_writes.push_back((obj_ver_id){
.oid = op->oid,
.version = op->version,
});
if (!PRIV(op)->pending_ops)
{
ack_write(op);
}
}
return 1;
}
void blockstore_impl_t::handle_write_event(ring_data_t *data, blockstore_op_t *op)
{
live = true;
if (data->res != data->iov.iov_len)
{
// FIXME: our state becomes corrupted after a write error. maybe do something better than just die
throw std::runtime_error(
"write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
"). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
);
}
PRIV(op)->pending_ops--;
if (PRIV(op)->pending_ops == 0)
{
release_journal_sectors(op);
ack_write(op);
}
}
void blockstore_impl_t::release_journal_sectors(blockstore_op_t *op)
{
// Release used journal sectors
if (PRIV(op)->min_used_journal_sector > 0 &&
PRIV(op)->max_used_journal_sector > 0)
{
uint64_t s = PRIV(op)->min_used_journal_sector;
while (1)
{
journal.sector_info[s-1].usage_count--;
if (s == PRIV(op)->max_used_journal_sector)
break;
s = 1 + s % journal.sector_count;
}
PRIV(op)->min_used_journal_sector = PRIV(op)->max_used_journal_sector = 0;
}
}
void blockstore_impl_t::ack_write(blockstore_op_t *op)
{
// Switch object state
auto & dirty_entry = dirty_db[(obj_ver_id){
.oid = op->oid,
.version = op->version,
}];
#ifdef BLOCKSTORE_DEBUG
printf("Ack write %lu:%lu v%lu = %d\n", op->oid.inode, op->oid.stripe, op->version, dirty_entry.state);
#endif
if (dirty_entry.state == ST_J_SUBMITTED)
{
dirty_entry.state = ST_J_WRITTEN;
}
else if (dirty_entry.state == ST_D_SUBMITTED)
{
dirty_entry.state = ST_D_WRITTEN;
}
else if (dirty_entry.state == ST_DEL_SUBMITTED)
{
dirty_entry.state = ST_DEL_WRITTEN;
}
// Acknowledge write without sync
op->retval = op->len;
FINISH_OP(op);
}
int blockstore_impl_t::dequeue_del(blockstore_op_t *op)
{
auto dirty_it = dirty_db.find((obj_ver_id){
.oid = op->oid,
.version = op->version,
});
blockstore_journal_check_t space_check(this);
if (!space_check.check_available(op, 1, sizeof(journal_entry_del), 0))
{
return 0;
}
BS_SUBMIT_GET_ONLY_SQE(sqe);
// Prepare journal sector write
journal_entry_del *je = (journal_entry_del*)
prefill_single_journal_entry(journal, JE_DELETE, sizeof(struct journal_entry_del));
dirty_it->second.journal_sector = journal.sector_info[journal.cur_sector].offset;
journal.used_sectors[journal.sector_info[journal.cur_sector].offset]++;
#ifdef BLOCKSTORE_DEBUG
printf("journal offset %lu is used by %lu:%lu v%lu\n", dirty_it->second.journal_sector, dirty_it->first.oid.inode, dirty_it->first.oid.stripe, dirty_it->first.version);
#endif
je->oid = op->oid;
je->version = op->version;
je->crc32 = je_crc32((journal_entry*)je);
journal.crc32_last = je->crc32;
auto cb = [this, op](ring_data_t *data) { handle_write_event(data, op); };
prepare_journal_sector_write(journal, journal.cur_sector, sqe, cb);
PRIV(op)->min_used_journal_sector = PRIV(op)->max_used_journal_sector = 1 + journal.cur_sector;
PRIV(op)->pending_ops = 1;
dirty_it->second.state = ST_DEL_SUBMITTED;
// Remember small write as unsynced
unsynced_small_writes.push_back((obj_ver_id){
.oid = op->oid,
.version = op->version,
});
return 1;
}

13
copy-fio-includes.sh Executable file
View File

@ -0,0 +1,13 @@
#!/bin/bash
gcc -I. -E -o fio_headers.i src/fio_headers.h
rm -rf fio-copy
for i in `grep -Po 'fio/[^"]+' fio_headers.i | sort | uniq`; do
j=${i##fio/}
p=$(dirname $j)
mkdir -p fio-copy/$p
cp $i fio-copy/$j
done
rm fio_headers.i

18
copy-qemu-includes.sh Executable file
View File

@ -0,0 +1,18 @@
#!/bin/bash
#cd qemu
#debian/rules b/configure-stamp
#cd b/qemu; make qapi
gcc -I qemu/b/qemu `pkg-config glib-2.0 --cflags` \
-I qemu/include -E -o qemu_driver.i src/qemu_driver.c
rm -rf qemu-copy
for i in `grep -Po 'qemu/[^"]+' qemu_driver.i | sort | uniq`; do
j=${i##qemu/}
p=$(dirname $j)
mkdir -p qemu-copy/$p
cp $i qemu-copy/$j
done
rm qemu_driver.i

1
cpp-btree Submodule

@ -0,0 +1 @@
Subproject commit 45e6d1f13196a0824e2089a586c53b9de0283f17

2
csi/.dockerignore Normal file
View File

@ -0,0 +1,2 @@
vitastor-csi
Dockerfile

32
csi/Dockerfile Normal file
View File

@ -0,0 +1,32 @@
# Compile stage
FROM golang:buster AS build
ADD go.sum go.mod /app/
RUN cd /app; CGO_ENABLED=1 GOOS=linux GOARCH=amd64 go mod download -x
ADD . /app
RUN perl -i -e '$/ = undef; while(<>) { s/\n\s*(\{\s*\n)/$1\n/g; s/\}(\s*\n\s*)else\b/$1} else/g; print; }' `find /app -name '*.go'`
RUN cd /app; CGO_ENABLED=1 GOOS=linux GOARCH=amd64 go build -o vitastor-csi
# Final stage
FROM debian:buster
LABEL maintainers="Vitaliy Filippov <vitalif@yourcmc.ru>"
LABEL description="Vitastor CSI Driver"
ENV NODE_ID=""
ENV CSI_ENDPOINT=""
RUN apt-get update && \
apt-get install -y wget && \
wget -q -O /etc/apt/trusted.gpg.d/vitastor.gpg https://vitastor.io/debian/pubkey.gpg && \
(echo deb http://vitastor.io/debian buster main > /etc/apt/sources.list.d/vitastor.list) && \
(echo deb http://deb.debian.org/debian buster-backports main > /etc/apt/sources.list.d/backports.list) && \
(echo "APT::Install-Recommends false;" > /etc/apt/apt.conf) && \
apt-get update && \
apt-get install -y e2fsprogs xfsprogs vitastor kmod && \
apt-get clean && \
(echo options nbd nbds_max=128 > /etc/modprobe.d/nbd.conf)
COPY --from=build /app/vitastor-csi /bin/
ENTRYPOINT ["/bin/vitastor-csi"]

9
csi/Makefile Normal file
View File

@ -0,0 +1,9 @@
VERSION ?= v0.6.17
all: build push
build:
@docker build --rm -t vitalif/vitastor-csi:$(VERSION) .
push:
@docker push vitalif/vitastor-csi:$(VERSION)

View File

@ -0,0 +1,5 @@
---
apiVersion: v1
kind: Namespace
metadata:
name: vitastor-system

View File

@ -0,0 +1,9 @@
---
apiVersion: v1
kind: ConfigMap
data:
vitastor.conf: |-
{"etcd_address":"http://192.168.7.2:2379","etcd_prefix":"/vitastor"}
metadata:
namespace: vitastor-system
name: vitastor-config

View File

@ -0,0 +1,37 @@
---
apiVersion: v1
kind: ServiceAccount
metadata:
namespace: vitastor-system
name: vitastor-csi-nodeplugin
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
namespace: vitastor-system
name: vitastor-csi-nodeplugin
rules:
- apiGroups: [""]
resources: ["nodes"]
verbs: ["get"]
# allow to read Vault Token and connection options from the Tenants namespace
- apiGroups: [""]
resources: ["secrets"]
verbs: ["get"]
- apiGroups: [""]
resources: ["configmaps"]
verbs: ["get"]
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
namespace: vitastor-system
name: vitastor-csi-nodeplugin
subjects:
- kind: ServiceAccount
name: vitastor-csi-nodeplugin
namespace: vitastor-system
roleRef:
kind: ClusterRole
name: vitastor-csi-nodeplugin
apiGroup: rbac.authorization.k8s.io

View File

@ -0,0 +1,72 @@
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
namespace: vitastor-system
name: vitastor-csi-nodeplugin-psp
spec:
allowPrivilegeEscalation: true
allowedCapabilities:
- 'SYS_ADMIN'
fsGroup:
rule: RunAsAny
privileged: true
hostNetwork: true
hostPID: true
runAsUser:
rule: RunAsAny
seLinux:
rule: RunAsAny
supplementalGroups:
rule: RunAsAny
volumes:
- 'configMap'
- 'emptyDir'
- 'projected'
- 'secret'
- 'downwardAPI'
- 'hostPath'
allowedHostPaths:
- pathPrefix: '/dev'
readOnly: false
- pathPrefix: '/run/mount'
readOnly: false
- pathPrefix: '/sys'
readOnly: false
- pathPrefix: '/lib/modules'
readOnly: true
- pathPrefix: '/var/lib/kubelet/pods'
readOnly: false
- pathPrefix: '/var/lib/kubelet/plugins/csi.vitastor.io'
readOnly: false
- pathPrefix: '/var/lib/kubelet/plugins_registry'
readOnly: false
- pathPrefix: '/var/lib/kubelet/plugins'
readOnly: false
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
namespace: vitastor-system
name: vitastor-csi-nodeplugin-psp
rules:
- apiGroups: ['policy']
resources: ['podsecuritypolicies']
verbs: ['use']
resourceNames: ['vitastor-csi-nodeplugin-psp']
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
namespace: vitastor-system
name: vitastor-csi-nodeplugin-psp
subjects:
- kind: ServiceAccount
name: vitastor-csi-nodeplugin
namespace: vitastor-system
roleRef:
kind: Role
name: vitastor-csi-nodeplugin-psp
apiGroup: rbac.authorization.k8s.io

View File

@ -0,0 +1,140 @@
---
kind: DaemonSet
apiVersion: apps/v1
metadata:
namespace: vitastor-system
name: csi-vitastor
spec:
selector:
matchLabels:
app: csi-vitastor
template:
metadata:
namespace: vitastor-system
labels:
app: csi-vitastor
spec:
serviceAccountName: vitastor-csi-nodeplugin
hostNetwork: true
hostPID: true
priorityClassName: system-node-critical
# to use e.g. Rook orchestrated cluster, and mons' FQDN is
# resolved through k8s service, set dns policy to cluster first
dnsPolicy: ClusterFirstWithHostNet
containers:
- name: driver-registrar
# This is necessary only for systems with SELinux, where
# non-privileged sidecar containers cannot access unix domain socket
# created by privileged CSI driver container.
securityContext:
privileged: true
image: k8s.gcr.io/sig-storage/csi-node-driver-registrar:v2.2.0
args:
- "--v=5"
- "--csi-address=/csi/csi.sock"
- "--kubelet-registration-path=/var/lib/kubelet/plugins/csi.vitastor.io/csi.sock"
env:
- name: KUBE_NODE_NAME
valueFrom:
fieldRef:
fieldPath: spec.nodeName
volumeMounts:
- name: socket-dir
mountPath: /csi
- name: registration-dir
mountPath: /registration
- name: csi-vitastor
securityContext:
privileged: true
capabilities:
add: ["SYS_ADMIN"]
allowPrivilegeEscalation: true
image: vitalif/vitastor-csi:v0.6.17
args:
- "--node=$(NODE_ID)"
- "--endpoint=$(CSI_ENDPOINT)"
env:
- name: NODE_ID
valueFrom:
fieldRef:
fieldPath: spec.nodeName
- name: CSI_ENDPOINT
value: unix:///csi/csi.sock
imagePullPolicy: "IfNotPresent"
ports:
- containerPort: 9898
name: healthz
protocol: TCP
livenessProbe:
failureThreshold: 5
httpGet:
path: /healthz
port: healthz
initialDelaySeconds: 10
timeoutSeconds: 3
periodSeconds: 2
volumeMounts:
- name: socket-dir
mountPath: /csi
- mountPath: /dev
name: host-dev
- mountPath: /sys
name: host-sys
- mountPath: /run/mount
name: host-mount
- mountPath: /lib/modules
name: lib-modules
readOnly: true
- name: vitastor-config
mountPath: /etc/vitastor
- name: plugin-dir
mountPath: /var/lib/kubelet/plugins
mountPropagation: "Bidirectional"
- name: mountpoint-dir
mountPath: /var/lib/kubelet/pods
mountPropagation: "Bidirectional"
- name: liveness-probe
securityContext:
privileged: true
image: quay.io/k8scsi/livenessprobe:v1.1.0
args:
- "--csi-address=$(CSI_ENDPOINT)"
- "--health-port=9898"
env:
- name: CSI_ENDPOINT
value: unix://csi/csi.sock
volumeMounts:
- mountPath: /csi
name: socket-dir
volumes:
- name: socket-dir
hostPath:
path: /var/lib/kubelet/plugins/csi.vitastor.io
type: DirectoryOrCreate
- name: plugin-dir
hostPath:
path: /var/lib/kubelet/plugins
type: Directory
- name: mountpoint-dir
hostPath:
path: /var/lib/kubelet/pods
type: DirectoryOrCreate
- name: registration-dir
hostPath:
path: /var/lib/kubelet/plugins_registry/
type: Directory
- name: host-dev
hostPath:
path: /dev
- name: host-sys
hostPath:
path: /sys
- name: host-mount
hostPath:
path: /run/mount
- name: lib-modules
hostPath:
path: /lib/modules
- name: vitastor-config
configMap:
name: vitastor-config

View File

@ -0,0 +1,102 @@
---
apiVersion: v1
kind: ServiceAccount
metadata:
namespace: vitastor-system
name: vitastor-csi-provisioner
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
namespace: vitastor-system
name: vitastor-external-provisioner-runner
rules:
- apiGroups: [""]
resources: ["nodes"]
verbs: ["get", "list", "watch"]
- apiGroups: [""]
resources: ["secrets"]
verbs: ["get", "list", "watch"]
- apiGroups: [""]
resources: ["events"]
verbs: ["list", "watch", "create", "update", "patch"]
- apiGroups: [""]
resources: ["persistentvolumes"]
verbs: ["get", "list", "watch", "create", "update", "delete", "patch"]
- apiGroups: [""]
resources: ["persistentvolumeclaims"]
verbs: ["get", "list", "watch", "update"]
- apiGroups: [""]
resources: ["persistentvolumeclaims/status"]
verbs: ["update", "patch"]
- apiGroups: ["storage.k8s.io"]
resources: ["storageclasses"]
verbs: ["get", "list", "watch"]
- apiGroups: ["snapshot.storage.k8s.io"]
resources: ["volumesnapshots"]
verbs: ["get", "list"]
- apiGroups: ["snapshot.storage.k8s.io"]
resources: ["volumesnapshotcontents"]
verbs: ["create", "get", "list", "watch", "update", "delete"]
- apiGroups: ["snapshot.storage.k8s.io"]
resources: ["volumesnapshotclasses"]
verbs: ["get", "list", "watch"]
- apiGroups: ["storage.k8s.io"]
resources: ["volumeattachments"]
verbs: ["get", "list", "watch", "update", "patch"]
- apiGroups: ["storage.k8s.io"]
resources: ["volumeattachments/status"]
verbs: ["patch"]
- apiGroups: ["storage.k8s.io"]
resources: ["csinodes"]
verbs: ["get", "list", "watch"]
- apiGroups: ["snapshot.storage.k8s.io"]
resources: ["volumesnapshotcontents/status"]
verbs: ["update"]
- apiGroups: [""]
resources: ["configmaps"]
verbs: ["get"]
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
namespace: vitastor-system
name: vitastor-csi-provisioner-role
subjects:
- kind: ServiceAccount
name: vitastor-csi-provisioner
namespace: vitastor-system
roleRef:
kind: ClusterRole
name: vitastor-external-provisioner-runner
apiGroup: rbac.authorization.k8s.io
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
namespace: vitastor-system
name: vitastor-external-provisioner-cfg
rules:
- apiGroups: [""]
resources: ["configmaps"]
verbs: ["get", "list", "watch", "create", "update", "delete"]
- apiGroups: ["coordination.k8s.io"]
resources: ["leases"]
verbs: ["get", "watch", "list", "delete", "update", "create"]
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: vitastor-csi-provisioner-role-cfg
namespace: vitastor-system
subjects:
- kind: ServiceAccount
name: vitastor-csi-provisioner
namespace: vitastor-system
roleRef:
kind: Role
name: vitastor-external-provisioner-cfg
apiGroup: rbac.authorization.k8s.io

View File

@ -0,0 +1,60 @@
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
namespace: vitastor-system
name: vitastor-csi-provisioner-psp
spec:
allowPrivilegeEscalation: true
allowedCapabilities:
- 'SYS_ADMIN'
fsGroup:
rule: RunAsAny
privileged: true
runAsUser:
rule: RunAsAny
seLinux:
rule: RunAsAny
supplementalGroups:
rule: RunAsAny
volumes:
- 'configMap'
- 'emptyDir'
- 'projected'
- 'secret'
- 'downwardAPI'
- 'hostPath'
allowedHostPaths:
- pathPrefix: '/dev'
readOnly: false
- pathPrefix: '/sys'
readOnly: false
- pathPrefix: '/lib/modules'
readOnly: true
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
namespace: vitastor-system
name: vitastor-csi-provisioner-psp
rules:
- apiGroups: ['policy']
resources: ['podsecuritypolicies']
verbs: ['use']
resourceNames: ['vitastor-csi-provisioner-psp']
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: vitastor-csi-provisioner-psp
namespace: vitastor-system
subjects:
- kind: ServiceAccount
name: vitastor-csi-provisioner
namespace: vitastor-system
roleRef:
kind: Role
name: vitastor-csi-provisioner-psp
apiGroup: rbac.authorization.k8s.io

View File

@ -0,0 +1,159 @@
---
kind: Service
apiVersion: v1
metadata:
namespace: vitastor-system
name: csi-vitastor-provisioner
labels:
app: csi-metrics
spec:
selector:
app: csi-vitastor-provisioner
ports:
- name: http-metrics
port: 8080
protocol: TCP
targetPort: 8680
---
kind: Deployment
apiVersion: apps/v1
metadata:
namespace: vitastor-system
name: csi-vitastor-provisioner
spec:
replicas: 3
selector:
matchLabels:
app: csi-vitastor-provisioner
template:
metadata:
namespace: vitastor-system
labels:
app: csi-vitastor-provisioner
spec:
affinity:
podAntiAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
- labelSelector:
matchExpressions:
- key: app
operator: In
values:
- csi-vitastor-provisioner
topologyKey: "kubernetes.io/hostname"
serviceAccountName: vitastor-csi-provisioner
priorityClassName: system-cluster-critical
containers:
- name: csi-provisioner
image: k8s.gcr.io/sig-storage/csi-provisioner:v2.2.0
args:
- "--csi-address=$(ADDRESS)"
- "--v=5"
- "--timeout=150s"
- "--retry-interval-start=500ms"
- "--leader-election=true"
# set it to true to use topology based provisioning
- "--feature-gates=Topology=false"
# if fstype is not specified in storageclass, ext4 is default
- "--default-fstype=ext4"
- "--extra-create-metadata=true"
env:
- name: ADDRESS
value: unix:///csi/csi-provisioner.sock
imagePullPolicy: "IfNotPresent"
volumeMounts:
- name: socket-dir
mountPath: /csi
- name: csi-snapshotter
image: k8s.gcr.io/sig-storage/csi-snapshotter:v4.0.0
args:
- "--csi-address=$(ADDRESS)"
- "--v=5"
- "--timeout=150s"
- "--leader-election=true"
env:
- name: ADDRESS
value: unix:///csi/csi-provisioner.sock
imagePullPolicy: "IfNotPresent"
securityContext:
privileged: true
volumeMounts:
- name: socket-dir
mountPath: /csi
- name: csi-attacher
image: k8s.gcr.io/sig-storage/csi-attacher:v3.1.0
args:
- "--v=5"
- "--csi-address=$(ADDRESS)"
- "--leader-election=true"
- "--retry-interval-start=500ms"
env:
- name: ADDRESS
value: /csi/csi-provisioner.sock
imagePullPolicy: "IfNotPresent"
volumeMounts:
- name: socket-dir
mountPath: /csi
- name: csi-resizer
image: k8s.gcr.io/sig-storage/csi-resizer:v1.1.0
args:
- "--csi-address=$(ADDRESS)"
- "--v=5"
- "--timeout=150s"
- "--leader-election"
- "--retry-interval-start=500ms"
- "--handle-volume-inuse-error=false"
env:
- name: ADDRESS
value: unix:///csi/csi-provisioner.sock
imagePullPolicy: "IfNotPresent"
volumeMounts:
- name: socket-dir
mountPath: /csi
- name: csi-vitastor
securityContext:
privileged: true
capabilities:
add: ["SYS_ADMIN"]
image: vitalif/vitastor-csi:v0.6.17
args:
- "--node=$(NODE_ID)"
- "--endpoint=$(CSI_ENDPOINT)"
env:
- name: NODE_ID
valueFrom:
fieldRef:
fieldPath: spec.nodeName
- name: CSI_ENDPOINT
value: unix:///csi/csi-provisioner.sock
imagePullPolicy: "IfNotPresent"
volumeMounts:
- name: socket-dir
mountPath: /csi
- mountPath: /dev
name: host-dev
- mountPath: /sys
name: host-sys
- mountPath: /lib/modules
name: lib-modules
readOnly: true
- name: vitastor-config
mountPath: /etc/vitastor
volumes:
- name: host-dev
hostPath:
path: /dev
- name: host-sys
hostPath:
path: /sys
- name: lib-modules
hostPath:
path: /lib/modules
- name: socket-dir
emptyDir: {
medium: "Memory"
}
- name: vitastor-config
configMap:
name: vitastor-config

View File

@ -0,0 +1,11 @@
---
# if Kubernetes version is less than 1.18 change
# apiVersion to storage.k8s.io/v1betav1
apiVersion: storage.k8s.io/v1
kind: CSIDriver
metadata:
namespace: vitastor-system
name: csi.vitastor.io
spec:
attachRequired: true
podInfoOnMount: false

View File

@ -0,0 +1,19 @@
---
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
namespace: vitastor-system
name: vitastor
annotations:
storageclass.kubernetes.io/is-default-class: "true"
provisioner: csi.vitastor.io
volumeBindingMode: Immediate
parameters:
etcdVolumePrefix: ""
poolId: "1"
# you can choose other configuration file if you have it in the config map
#configPath: "/etc/vitastor/vitastor.conf"
# you can also specify etcdUrl here, maybe to connect to another Vitastor cluster
# multiple etcdUrls may be specified, delimited by comma
#etcdUrl: "http://192.168.7.2:2379"
#etcdPrefix: "/vitastor"

View File

@ -0,0 +1,13 @@
---
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
name: test-vitastor-pvc-block
spec:
storageClassName: vitastor
volumeMode: Block
accessModes:
- ReadWriteMany
resources:
requests:
storage: 10Gi

View File

@ -0,0 +1,12 @@
---
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
name: test-vitastor-pvc
spec:
storageClassName: vitastor
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 10Gi

View File

@ -0,0 +1,17 @@
apiVersion: v1
kind: Pod
metadata:
name: vitastor-test-block-pvc
namespace: default
spec:
containers:
- name: vitastor-test-block-pvc
image: nginx
volumeDevices:
- name: data
devicePath: /dev/xvda
volumes:
- name: data
persistentVolumeClaim:
claimName: test-vitastor-pvc-block
readOnly: false

View File

@ -0,0 +1,17 @@
apiVersion: v1
kind: Pod
metadata:
name: vitastor-test-nginx
namespace: default
spec:
containers:
- name: vitastor-test-nginx
image: nginx
volumeMounts:
- mountPath: /usr/share/nginx/html/s3
name: data
volumes:
- name: data
persistentVolumeClaim:
claimName: test-vitastor-pvc
readOnly: false

35
csi/go.mod Normal file
View File

@ -0,0 +1,35 @@
module vitastor.io/csi
go 1.15
require (
github.com/container-storage-interface/spec v1.4.0
github.com/coreos/bbolt v0.0.0-00010101000000-000000000000 // indirect
github.com/coreos/etcd v3.3.25+incompatible // indirect
github.com/coreos/go-semver v0.3.0 // indirect
github.com/coreos/go-systemd v0.0.0-20191104093116-d3cd4ed1dbcf // indirect
github.com/coreos/pkg v0.0.0-20180928190104-399ea9e2e55f // indirect
github.com/dustin/go-humanize v1.0.0 // indirect
github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b
github.com/gorilla/websocket v1.4.2 // indirect
github.com/grpc-ecosystem/go-grpc-middleware v1.3.0 // indirect
github.com/grpc-ecosystem/go-grpc-prometheus v1.2.0 // indirect
github.com/grpc-ecosystem/grpc-gateway v1.16.0 // indirect
github.com/jonboulle/clockwork v0.2.2 // indirect
github.com/kubernetes-csi/csi-lib-utils v0.9.1
github.com/soheilhy/cmux v0.1.5 // indirect
github.com/tmc/grpc-websocket-proxy v0.0.0-20201229170055-e5319fda7802 // indirect
github.com/xiang90/probing v0.0.0-20190116061207-43a291ad63a2 // indirect
go.etcd.io/bbolt v0.0.0-00010101000000-000000000000 // indirect
go.etcd.io/etcd v3.3.25+incompatible
golang.org/x/net v0.0.0-20201202161906-c7110b5ffcbb
google.golang.org/grpc v1.33.1
k8s.io/klog v1.0.0
k8s.io/utils v0.0.0-20210305010621-2afb4311ab10
)
replace github.com/coreos/bbolt => go.etcd.io/bbolt v1.3.5
replace go.etcd.io/bbolt => github.com/coreos/bbolt v1.3.5
replace google.golang.org/grpc => google.golang.org/grpc v1.25.1

448
csi/go.sum Normal file
View File

@ -0,0 +1,448 @@
cloud.google.com/go v0.34.0/go.mod h1:aQUYkXzVsufM+DwF1aE+0xfcU+56JwCaLick0ClmMTw=
cloud.google.com/go v0.38.0/go.mod h1:990N+gfupTy94rShfmMCWGDn0LpTmnzTp2qbd1dvSRU=
cloud.google.com/go v0.44.1/go.mod h1:iSa0KzasP4Uvy3f1mN/7PiObzGgflwredwwASm/v6AU=
cloud.google.com/go v0.44.2/go.mod h1:60680Gw3Yr4ikxnPRS/oxxkBccT6SA1yMk63TGekxKY=
cloud.google.com/go v0.45.1/go.mod h1:RpBamKRgapWJb87xiFSdk4g1CME7QZg3uwTez+TSTjc=
cloud.google.com/go v0.46.3/go.mod h1:a6bKKbmY7er1mI7TEI4lsAkts/mkhTSZK8w33B4RAg0=
cloud.google.com/go v0.51.0/go.mod h1:hWtGJ6gnXH+KgDv+V0zFGDvpi07n3z8ZNj3T1RW0Gcw=
cloud.google.com/go/bigquery v1.0.1/go.mod h1:i/xbL2UlR5RvWAURpBYZTtm/cXjCha9lbfbpx4poX+o=
cloud.google.com/go/datastore v1.0.0/go.mod h1:LXYbyblFSglQ5pkeyhO+Qmw7ukd3C+pD7TKLgZqpHYE=
cloud.google.com/go/pubsub v1.0.1/go.mod h1:R0Gpsv3s54REJCy4fxDixWD93lHJMoZTyQ2kNxGRt3I=
cloud.google.com/go/storage v1.0.0/go.mod h1:IhtSnM/ZTZV8YYJWCY8RULGVqBDmpoyjwiyrjsg+URw=
dmitri.shuralyov.com/gpu/mtl v0.0.0-20190408044501-666a987793e9/go.mod h1:H6x//7gZCb22OMCxBHrMx7a5I7Hp++hsVxbQ4BYO7hU=
github.com/Azure/go-ansiterm v0.0.0-20170929234023-d6e3b3328b78/go.mod h1:LmzpDX56iTiv29bbRTIsUNlaFfuhWRQBWjQdVyAevI8=
github.com/Azure/go-autorest/autorest v0.9.0/go.mod h1:xyHB1BMZT0cuDHU7I0+g046+BFDTQ8rEZB0s4Yfa6bI=
github.com/Azure/go-autorest/autorest v0.9.6/go.mod h1:/FALq9T/kS7b5J5qsQ+RSTUdAmGFqi0vUdVNNx8q630=
github.com/Azure/go-autorest/autorest/adal v0.5.0/go.mod h1:8Z9fGy2MpX0PvDjB1pEgQTmVqjGhiHBW7RJJEciWzS0=
github.com/Azure/go-autorest/autorest/adal v0.8.2/go.mod h1:ZjhuQClTqx435SRJ2iMlOxPYt3d2C/T/7TiQCVZSn3Q=
github.com/Azure/go-autorest/autorest/date v0.1.0/go.mod h1:plvfp3oPSKwf2DNjlBjWF/7vwR+cUD/ELuzDCXwHUVA=
github.com/Azure/go-autorest/autorest/date v0.2.0/go.mod h1:vcORJHLJEh643/Ioh9+vPmf1Ij9AEBM5FuBIXLmIy0g=
github.com/Azure/go-autorest/autorest/mocks v0.1.0/go.mod h1:OTyCOPRA2IgIlWxVYxBee2F5Gr4kF2zd2J5cFRaIDN0=
github.com/Azure/go-autorest/autorest/mocks v0.2.0/go.mod h1:OTyCOPRA2IgIlWxVYxBee2F5Gr4kF2zd2J5cFRaIDN0=
github.com/Azure/go-autorest/autorest/mocks v0.3.0/go.mod h1:a8FDP3DYzQ4RYfVAxAN3SVSiiO77gL2j2ronKKP0syM=
github.com/Azure/go-autorest/logger v0.1.0/go.mod h1:oExouG+K6PryycPJfVSxi/koC6LSNgds39diKLz7Vrc=
github.com/Azure/go-autorest/tracing v0.5.0/go.mod h1:r/s2XiOKccPW3HrqB+W0TQzfbtp2fGCgRFtBroKn4Dk=
github.com/BurntSushi/toml v0.3.1/go.mod h1:xHWCNGjB5oqiDr8zfno3MHue2Ht5sIBksp03qcyfWMU=
github.com/BurntSushi/xgb v0.0.0-20160522181843-27f122750802/go.mod h1:IVnqGOEym/WlBOVXweHU+Q+/VP0lqqI8lqeDx9IjBqo=
github.com/NYTimes/gziphandler v0.0.0-20170623195520-56545f4a5d46/go.mod h1:3wb06e3pkSAbeQ52E9H9iFoQsEEwGN64994WTCIhntQ=
github.com/PuerkitoBio/purell v1.0.0/go.mod h1:c11w/QuzBsJSee3cPx9rAFu61PvFxuPbtSwDGJws/X0=
github.com/PuerkitoBio/urlesc v0.0.0-20160726150825-5bd2802263f2/go.mod h1:uGdkoq3SwY9Y+13GIhn11/XLaGBb4BfwItxLd5jeuXE=
github.com/alecthomas/template v0.0.0-20160405071501-a0175ee3bccc/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
github.com/alecthomas/template v0.0.0-20190718012654-fb15b899a751/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
github.com/alecthomas/units v0.0.0-20151022065526-2efee857e7cf/go.mod h1:ybxpYRFXyAe+OPACYpWeL0wqObRcbAqCMya13uyzqw0=
github.com/alecthomas/units v0.0.0-20190717042225-c3de453c63f4/go.mod h1:ybxpYRFXyAe+OPACYpWeL0wqObRcbAqCMya13uyzqw0=
github.com/antihax/optional v1.0.0/go.mod h1:uupD/76wgC+ih3iEmQUL+0Ugr19nfwCT1kdvxnR2qWY=
github.com/beorn7/perks v0.0.0-20180321164747-3a771d992973/go.mod h1:Dwedo/Wpr24TaqPxmxbtue+5NUziq4I4S80YR8gNf3Q=
github.com/beorn7/perks v1.0.0/go.mod h1:KWe93zE9D1o94FZ5RNwFwVgaQK1VOXiVxmqh+CedLV8=
github.com/beorn7/perks v1.0.1 h1:VlbKKnNfV8bJzeqoa4cOKqO6bYr3WgKZxO8Z16+hsOM=
github.com/beorn7/perks v1.0.1/go.mod h1:G2ZrVWU2WbWT9wwq4/hrbKbnv/1ERSJQ0ibhJ6rlkpw=
github.com/blang/semver v3.5.0+incompatible/go.mod h1:kRBLl5iJ+tD4TcOOxsy/0fnwebNt5EWlYSAyrTnjyyk=
github.com/census-instrumentation/opencensus-proto v0.2.1/go.mod h1:f6KPmirojxKA12rnyqOA5BBL4O983OfeGPqjHWSTneU=
github.com/cespare/xxhash/v2 v2.1.1 h1:6MnRN8NT7+YBpUIWxHtefFZOKTAPgGjpQSxqLNn0+qY=
github.com/cespare/xxhash/v2 v2.1.1/go.mod h1:VGX0DQ3Q6kWi7AoAeZDth3/j3BFtOZR5XLFGgcrjCOs=
github.com/chzyer/logex v1.1.10/go.mod h1:+Ywpsq7O8HXn0nuIou7OrIPyXbp3wmkHB+jjWRnGsAI=
github.com/chzyer/readline v0.0.0-20180603132655-2972be24d48e/go.mod h1:nSuG5e5PlCu98SY8svDHJxuZscDgtXS6KTTbou5AhLI=
github.com/chzyer/test v0.0.0-20180213035817-a1ea475d72b1/go.mod h1:Q3SI9o4m/ZMnBNeIyt5eFwwo7qiLfzFZmjNmxjkiQlU=
github.com/container-storage-interface/spec v1.2.0/go.mod h1:6URME8mwIBbpVyZV93Ce5St17xBiQJQY67NDsuohiy4=
github.com/container-storage-interface/spec v1.4.0 h1:ozAshSKxpJnYUfmkpZCTYyF/4MYeYlhdXbAvPvfGmkg=
github.com/container-storage-interface/spec v1.4.0/go.mod h1:6URME8mwIBbpVyZV93Ce5St17xBiQJQY67NDsuohiy4=
github.com/coreos/bbolt v1.3.5 h1:XFv7xaq7701j8ZSEzR28VohFYSlyakMyqNMU5FQH6Ac=
github.com/coreos/bbolt v1.3.5/go.mod h1:G5EMThwa9y8QZGBClrRx5EY+Yw9kAhnjy3bSjsnlVTQ=
github.com/coreos/etcd v3.3.25+incompatible h1:0GQEw6h3YnuOVdtwygkIfJ+Omx0tZ8/QkVyXI4LkbeY=
github.com/coreos/etcd v3.3.25+incompatible/go.mod h1:uF7uidLiAD3TWHmW31ZFd/JWoc32PjwdhPthX9715RE=
github.com/coreos/go-semver v0.3.0 h1:wkHLiw0WNATZnSG7epLsujiMCgPAc9xhjJ4tgnAxmfM=
github.com/coreos/go-semver v0.3.0/go.mod h1:nnelYz7RCh+5ahJtPPxZlU+153eP4D4r3EedlOD2RNk=
github.com/coreos/go-systemd v0.0.0-20191104093116-d3cd4ed1dbcf h1:iW4rZ826su+pqaw19uhpSCzhj44qo35pNgKFGqzDKkU=
github.com/coreos/go-systemd v0.0.0-20191104093116-d3cd4ed1dbcf/go.mod h1:F5haX7vjVVG0kc13fIWeqUViNPyEJxv/OmvnBo0Yme4=
github.com/coreos/pkg v0.0.0-20180928190104-399ea9e2e55f h1:lBNOc5arjvs8E5mO2tbpBpLoyyu8B6e44T7hJy6potg=
github.com/coreos/pkg v0.0.0-20180928190104-399ea9e2e55f/go.mod h1:E3G3o1h8I7cfcXa63jLwjI0eiQQMgzzUDFVpN/nH/eA=
github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
github.com/dgrijalva/jwt-go v3.2.0+incompatible h1:7qlOGliEKZXTDg6OTjfoBKDXWrumCAMpl/TFQ4/5kLM=
github.com/dgrijalva/jwt-go v3.2.0+incompatible/go.mod h1:E3ru+11k8xSBh+hMPgOLZmtrrCbhqsmaPHjLKYnJCaQ=
github.com/docker/spdystream v0.0.0-20160310174837-449fdfce4d96/go.mod h1:Qh8CwZgvJUkLughtfhJv5dyTYa91l1fOUCrgjqmcifM=
github.com/docopt/docopt-go v0.0.0-20180111231733-ee0de3bc6815/go.mod h1:WwZ+bS3ebgob9U8Nd0kOddGdZWjyMGR8Wziv+TBNwSE=
github.com/dustin/go-humanize v1.0.0 h1:VSnTsYCnlFHaM2/igO1h6X3HA71jcobQuxemgkq4zYo=
github.com/dustin/go-humanize v1.0.0/go.mod h1:HtrtbFcZ19U5GC7JDqmcUSB87Iq5E25KnS6fMYU6eOk=
github.com/elazarl/goproxy v0.0.0-20180725130230-947c36da3153/go.mod h1:/Zj4wYkgs4iZTTu3o/KG3Itv/qCCa8VVMlb3i9OVuzc=
github.com/emicklei/go-restful v0.0.0-20170410110728-ff4f55a20633/go.mod h1:otzb+WCGbkyDHkqmQmT5YD2WR4BBwUdeQoFo8l/7tVs=
github.com/envoyproxy/go-control-plane v0.9.0/go.mod h1:YTl/9mNaCwkRvm6d1a2C3ymFceY/DCBVvsKhRF0iEA4=
github.com/envoyproxy/protoc-gen-validate v0.1.0/go.mod h1:iSmxcyjqTsJpI2R4NaDN7+kN2VEUnK/pcBlmesArF7c=
github.com/evanphx/json-patch v4.9.0+incompatible/go.mod h1:50XU6AFN0ol/bzJsmQLiYLvXMP4fmwYFNcr97nuDLSk=
github.com/fsnotify/fsnotify v1.4.7/go.mod h1:jwhsz4b93w/PPRr/qN1Yymfu8t87LnFCMoQvtojpjFo=
github.com/fsnotify/fsnotify v1.4.9/go.mod h1:znqG4EE+3YCdAaPaxE2ZRY/06pZUdp0tY4IgpuI1SZQ=
github.com/ghodss/yaml v0.0.0-20150909031657-73d445a93680/go.mod h1:4dBDuWmgqj2HViK6kFavaiC9ZROes6MMH2rRYeMEF04=
github.com/ghodss/yaml v1.0.0/go.mod h1:4dBDuWmgqj2HViK6kFavaiC9ZROes6MMH2rRYeMEF04=
github.com/go-gl/glfw/v3.3/glfw v0.0.0-20191125211704-12ad95a8df72/go.mod h1:tQ2UAYgL5IevRw8kRxooKSPJfGvJ9fJQFa0TUsXzTg8=
github.com/go-kit/kit v0.8.0/go.mod h1:xBxKIO96dXMWWy0MnWVtmwkA9/13aqxPnvrjFYMA2as=
github.com/go-kit/kit v0.9.0/go.mod h1:xBxKIO96dXMWWy0MnWVtmwkA9/13aqxPnvrjFYMA2as=
github.com/go-logfmt/logfmt v0.3.0/go.mod h1:Qt1PoO58o5twSAckw1HlFXLmHsOX5/0LbT9GBnD5lWE=
github.com/go-logfmt/logfmt v0.4.0/go.mod h1:3RMwSq7FuexP4Kalkev3ejPJsZTpXXBr9+V4qmtdjCk=
github.com/go-logr/logr v0.1.0/go.mod h1:ixOQHD9gLJUVQQ2ZOR7zLEifBX6tGkNJF4QyIY7sIas=
github.com/go-logr/logr v0.2.0 h1:QvGt2nLcHH0WK9orKa+ppBPAxREcH364nPUedEpK0TY=
github.com/go-logr/logr v0.2.0/go.mod h1:z6/tIYblkpsD+a4lm/fGIIU9mZ+XfAiaFtq7xTgseGU=
github.com/go-openapi/jsonpointer v0.0.0-20160704185906-46af16f9f7b1/go.mod h1:+35s3my2LFTysnkMfxsJBAMHj/DoqoB9knIWoYG/Vk0=
github.com/go-openapi/jsonreference v0.0.0-20160704190145-13c6e3589ad9/go.mod h1:W3Z9FmVs9qj+KR4zFKmDPGiLdk1D9Rlm7cyMvf57TTg=
github.com/go-openapi/spec v0.0.0-20160808142527-6aced65f8501/go.mod h1:J8+jY1nAiCcj+friV/PDoE1/3eeccG9LYBs0tYvLOWc=
github.com/go-openapi/swag v0.0.0-20160704191624-1d0bd113de87/go.mod h1:DXUve3Dpr1UfpPtxFw+EFuQ41HhCWZfha5jSVRG7C7I=
github.com/go-stack/stack v1.8.0/go.mod h1:v0f6uXyyMGvRgIKkXu+yp6POWl0qKG85gN/melR3HDY=
github.com/gogo/protobuf v1.1.1/go.mod h1:r8qH/GZQm5c6nD/R0oafs1akxWv10x8SbQlK7atdtwQ=
github.com/gogo/protobuf v1.3.1 h1:DqDEcV5aeaTmdFBePNpYsp3FlcVH/2ISVVM9Qf8PSls=
github.com/gogo/protobuf v1.3.1/go.mod h1:SlYgWuQ5SjCEi6WLHjHCa1yvBfUnHcTbrrZtXPKa29o=
github.com/gogo/protobuf v1.3.2 h1:Ov1cvc58UF3b5XjBnZv7+opcTcQFZebYjWzi34vdm4Q=
github.com/gogo/protobuf v1.3.2/go.mod h1:P1XiOD3dCwIKUDQYPy72D8LYyHL2YPYrpS2s69NZV8Q=
github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b h1:VKtxabqXZkF25pY9ekfRL6a582T4P37/31XEstQ5p58=
github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b/go.mod h1:SBH7ygxi8pfUlaOkMMuAQtPIUF8ecWP5IEl/CR7VP2Q=
github.com/golang/groupcache v0.0.0-20190702054246-869f871628b6/go.mod h1:cIg4eruTrX1D+g88fzRXU5OdNfaM+9IcxsU14FzY7Hc=
github.com/golang/groupcache v0.0.0-20191227052852-215e87163ea7 h1:5ZkaAPbicIKTF2I64qf5Fh8Aa83Q/dnOafMYV0OMwjA=
github.com/golang/groupcache v0.0.0-20191227052852-215e87163ea7/go.mod h1:cIg4eruTrX1D+g88fzRXU5OdNfaM+9IcxsU14FzY7Hc=
github.com/golang/mock v1.1.1/go.mod h1:oTYuIxOrZwtPieC+H1uAHpcLFnEyAGVDL/k47Jfbm0A=
github.com/golang/mock v1.2.0/go.mod h1:oTYuIxOrZwtPieC+H1uAHpcLFnEyAGVDL/k47Jfbm0A=
github.com/golang/mock v1.3.1/go.mod h1:sBzyDLLjw3U8JLTeZvSv8jJB+tU5PVekmnlKIyFUx0Y=
github.com/golang/protobuf v1.2.0/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
github.com/golang/protobuf v1.3.1/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
github.com/golang/protobuf v1.3.2/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
github.com/golang/protobuf v1.3.3/go.mod h1:vzj43D7+SQXF/4pzW/hwtAqwc6iTitCiVSaWz5lYuqw=
github.com/golang/protobuf v1.4.0-rc.1/go.mod h1:ceaxUfeHdC40wWswd/P6IGgMaK3YpKi5j83Wpe3EHw8=
github.com/golang/protobuf v1.4.0-rc.1.0.20200221234624-67d41d38c208/go.mod h1:xKAWHe0F5eneWXFV3EuXVDTCmh+JuBKY0li0aMyXATA=
github.com/golang/protobuf v1.4.0-rc.2/go.mod h1:LlEzMj4AhA7rCAGe4KMBDvJI+AwstrUpVNzEA03Pprs=
github.com/golang/protobuf v1.4.0-rc.4.0.20200313231945-b860323f09d0/go.mod h1:WU3c8KckQ9AFe+yFwt9sWVRKCVIyN9cPHBJSNnbL67w=
github.com/golang/protobuf v1.4.0/go.mod h1:jodUvKwWbYaEsadDk5Fwe5c77LiNKVO9IDvqG2KuDX0=
github.com/golang/protobuf v1.4.1/go.mod h1:U8fpvMrcmy5pZrNK1lt4xCsGvpyWQ/VVv6QDs8UjoX8=
github.com/golang/protobuf v1.4.2 h1:+Z5KGCizgyZCbGh1KZqA0fcLLkwbsjIzS4aV2v7wJX0=
github.com/golang/protobuf v1.4.2/go.mod h1:oDoupMAO8OvCJWAcko0GGGIgR6R6ocIYbsSw735rRwI=
github.com/google/btree v0.0.0-20180813153112-4030bb1f1f0c/go.mod h1:lNA+9X1NB3Zf8V7Ke586lFgjr2dZNuvo3lPJSGZ5JPQ=
github.com/google/btree v1.0.0 h1:0udJVsspx3VBr5FwtLhQQtuAsVc79tTq0ocGIPAU6qo=
github.com/google/btree v1.0.0/go.mod h1:lNA+9X1NB3Zf8V7Ke586lFgjr2dZNuvo3lPJSGZ5JPQ=
github.com/google/go-cmp v0.2.0/go.mod h1:oXzfMopK8JAjlY9xF4vHSVASa0yLyX7SntLO5aqRK0M=
github.com/google/go-cmp v0.3.0/go.mod h1:8QqcDgzrUqlUb/G2PQTWiueGozuR1884gddMywk6iLU=
github.com/google/go-cmp v0.3.1/go.mod h1:8QqcDgzrUqlUb/G2PQTWiueGozuR1884gddMywk6iLU=
github.com/google/go-cmp v0.4.0 h1:xsAVV57WRhGj6kEIi8ReJzQlHHqcBYCElAvkovg3B/4=
github.com/google/go-cmp v0.4.0/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
github.com/google/gofuzz v1.0.0/go.mod h1:dBl0BpW6vV/+mYPU4Po3pmUjxk6FQPldtuIdl/M65Eg=
github.com/google/gofuzz v1.1.0/go.mod h1:dBl0BpW6vV/+mYPU4Po3pmUjxk6FQPldtuIdl/M65Eg=
github.com/google/martian v2.1.0+incompatible/go.mod h1:9I4somxYTbIHy5NJKHRl3wXiIaQGbYVAs8BPL6v8lEs=
github.com/google/pprof v0.0.0-20181206194817-3ea8567a2e57/go.mod h1:zfwlbNMJ+OItoe0UupaVj+oy1omPYYDuagoSzA8v9mc=
github.com/google/pprof v0.0.0-20190515194954-54271f7e092f/go.mod h1:zfwlbNMJ+OItoe0UupaVj+oy1omPYYDuagoSzA8v9mc=
github.com/google/pprof v0.0.0-20191218002539-d4f498aebedc/go.mod h1:ZgVRPoUq/hfqzAqh7sHMqb3I9Rq5C59dIz2SbBwJ4eM=
github.com/google/renameio v0.1.0/go.mod h1:KWCgfxg9yswjAJkECMjeO8J8rahYeXnNhOm40UhjYkI=
github.com/google/uuid v1.1.1 h1:Gkbcsh/GbpXz7lPftLA3P6TYMwjCLYm83jiFQZF/3gY=
github.com/google/uuid v1.1.1/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo=
github.com/googleapis/gax-go/v2 v2.0.4/go.mod h1:0Wqv26UfaUD9n4G6kQubkQ+KchISgw+vpHVxEJEs9eg=
github.com/googleapis/gax-go/v2 v2.0.5/go.mod h1:DWXyrwAJ9X0FpwwEdw+IPEYBICEFu5mhpdKc/us6bOk=
github.com/googleapis/gnostic v0.4.1/go.mod h1:LRhVm6pbyptWbWbuZ38d1eyptfvIytN3ir6b65WBswg=
github.com/gorilla/websocket v1.4.2 h1:+/TMaTYc4QFitKJxsQ7Yye35DkWvkdLcvGKqM+x0Ufc=
github.com/gorilla/websocket v1.4.2/go.mod h1:YR8l580nyteQvAITg2hZ9XVh4b55+EU/adAjf1fMHhE=
github.com/gregjones/httpcache v0.0.0-20180305231024-9cad4c3443a7/go.mod h1:FecbI9+v66THATjSRHfNgh1IVFe/9kFxbXtjV0ctIMA=
github.com/grpc-ecosystem/go-grpc-middleware v1.3.0 h1:+9834+KizmvFV7pXQGSXQTsaWhq2GjuNUt0aUU0YBYw=
github.com/grpc-ecosystem/go-grpc-middleware v1.3.0/go.mod h1:z0ButlSOZa5vEBq9m2m2hlwIgKw+rp3sdCBRoJY+30Y=
github.com/grpc-ecosystem/go-grpc-prometheus v1.2.0 h1:Ovs26xHkKqVztRpIrF/92BcuyuQ/YW4NSIpoGtfXNho=
github.com/grpc-ecosystem/go-grpc-prometheus v1.2.0/go.mod h1:8NvIoxWQoOIhqOTXgfV/d3M/q6VIi02HzZEHgUlZvzk=
github.com/grpc-ecosystem/grpc-gateway v1.16.0 h1:gmcG1KaJ57LophUzW0Hy8NmPhnMZb4M0+kPpLofRdBo=
github.com/grpc-ecosystem/grpc-gateway v1.16.0/go.mod h1:BDjrQk3hbvj6Nolgz8mAMFbcEtjT1g+wF4CSlocrBnw=
github.com/hashicorp/golang-lru v0.5.0/go.mod h1:/m3WP610KZHVQ1SGc6re/UDhFvYD7pJ4Ao+sR/qLZy8=
github.com/hashicorp/golang-lru v0.5.1/go.mod h1:/m3WP610KZHVQ1SGc6re/UDhFvYD7pJ4Ao+sR/qLZy8=
github.com/hpcloud/tail v1.0.0/go.mod h1:ab1qPbhIpdTxEkNHXyeSf5vhxWSCs/tWer42PpOxQnU=
github.com/ianlancetaylor/demangle v0.0.0-20181102032728-5e5cf60278f6/go.mod h1:aSSvb/t6k1mPoxDqO4vJh6VOCGPwU4O0C2/Eqndh1Sc=
github.com/imdario/mergo v0.3.5/go.mod h1:2EnlNZ0deacrJVfApfmtdGgDfMuh/nq6Ok1EcJh5FfA=
github.com/jonboulle/clockwork v0.2.2 h1:UOGuzwb1PwsrDAObMuhUnj0p5ULPj8V/xJ7Kx9qUBdQ=
github.com/jonboulle/clockwork v0.2.2/go.mod h1:Pkfl5aHPm1nk2H9h0bjmnJD/BcgbGXUBGnn1kMkgxc8=
github.com/json-iterator/go v1.1.6/go.mod h1:+SdeFBvtyEkXs7REEP0seUULqWtbJapLOCVDaaPEHmU=
github.com/json-iterator/go v1.1.10 h1:Kz6Cvnvv2wGdaG/V8yMvfkmNiXq9Ya2KUv4rouJJr68=
github.com/json-iterator/go v1.1.10/go.mod h1:KdQUCv79m/52Kvf8AW2vK1V8akMuk1QjK/uOdHXbAo4=
github.com/jstemmer/go-junit-report v0.0.0-20190106144839-af01ea7f8024/go.mod h1:6v2b51hI/fHJwM22ozAgKL4VKDeJcHhJFhtBdhmNjmU=
github.com/jstemmer/go-junit-report v0.9.1/go.mod h1:Brl9GWCQeLvo8nXZwPNNblvFj/XSXhF0NWZEnDohbsk=
github.com/julienschmidt/httprouter v1.2.0/go.mod h1:SYymIcj16QtmaHHD7aYtjjsJG7VTCxuUUipMqKk8s4w=
github.com/kisielk/errcheck v1.2.0/go.mod h1:/BMXB+zMLi60iA8Vv6Ksmxu/1UDYcXs4uQLJ+jE2L00=
github.com/kisielk/errcheck v1.5.0/go.mod h1:pFxgyoBC7bSaBwPgfKdkLd5X25qrDl4LWUI2bnpBCr8=
github.com/kisielk/gotool v1.0.0/go.mod h1:XhKaO+MFFWcvkIS/tQcRk01m1F5IRFswLeQ+oQHNcck=
github.com/konsorten/go-windows-terminal-sequences v1.0.1/go.mod h1:T0+1ngSBFLxvqU3pZ+m/2kptfBszLMUkC4ZK/EgS/cQ=
github.com/konsorten/go-windows-terminal-sequences v1.0.3 h1:CE8S1cTafDpPvMhIxNJKvHsGVBgn1xWYf1NbHQhywc8=
github.com/konsorten/go-windows-terminal-sequences v1.0.3/go.mod h1:T0+1ngSBFLxvqU3pZ+m/2kptfBszLMUkC4ZK/EgS/cQ=
github.com/kr/logfmt v0.0.0-20140226030751-b84e30acd515/go.mod h1:+0opPa2QZZtGFBFZlji/RkVcI2GknAs/DXo4wKdlNEc=
github.com/kr/pretty v0.1.0/go.mod h1:dAy3ld7l9f0ibDNOQOHHMYYIIbhfbHSm3C4ZsoJORNo=
github.com/kr/pretty v0.2.0 h1:s5hAObm+yFO5uHYt5dYjxi2rXrsnmRpJx4OYvIWUaQs=
github.com/kr/pretty v0.2.0/go.mod h1:ipq/a2n7PKx3OHsz4KJII5eveXtPO4qwEXGdVfWzfnI=
github.com/kr/pty v1.1.1/go.mod h1:pFQYn66WHrOpPYNljwOMqo10TkYh1fy3cYio2l3bCsQ=
github.com/kr/text v0.1.0 h1:45sCR5RtlFHMR4UwH9sdQ5TC8v0qDQCHnXt+kaKSTVE=
github.com/kr/text v0.1.0/go.mod h1:4Jbv+DJW3UT/LiOwJeYQe1efqtUx/iVham/4vfdArNI=
github.com/kubernetes-csi/csi-lib-utils v0.9.1 h1:sGq6ifVujfMSkfTsMZip44Ttv8SDXvsBlFk9GdYl/b8=
github.com/kubernetes-csi/csi-lib-utils v0.9.1/go.mod h1:8E2jVUX9j3QgspwHXa6LwyN7IHQDjW9jX3kwoWnSC+M=
github.com/mailru/easyjson v0.0.0-20160728113105-d5b7844b561a/go.mod h1:C1wdFJiN94OJF2b5HbByQZoLdCWB1Yqtg26g4irojpc=
github.com/matttproud/golang_protobuf_extensions v1.0.1/go.mod h1:D8He9yQNgCq6Z5Ld7szi9bcBfOoFv/3dc6xSMkL2PC0=
github.com/matttproud/golang_protobuf_extensions v1.0.2-0.20181231171920-c182affec369 h1:I0XW9+e1XWDxdcEniV4rQAIOPUGDq67JSCiRCgGCZLI=
github.com/matttproud/golang_protobuf_extensions v1.0.2-0.20181231171920-c182affec369/go.mod h1:BSXmuO+STAnVfrANrmjBb36TMTDstsz7MSK+HVaYKv4=
github.com/moby/term v0.0.0-20200312100748-672ec06f55cd/go.mod h1:DdlQx2hp0Ss5/fLikoLlEeIYiATotOjgB//nb973jeo=
github.com/modern-go/concurrent v0.0.0-20180228061459-e0a39a4cb421/go.mod h1:6dJC0mAP4ikYIbvyc7fijjWJddQyLn8Ig3JB5CqoB9Q=
github.com/modern-go/concurrent v0.0.0-20180306012644-bacd9c7ef1dd h1:TRLaZ9cD/w8PVh93nsPXa1VrQ6jlwL5oN8l14QlcNfg=
github.com/modern-go/concurrent v0.0.0-20180306012644-bacd9c7ef1dd/go.mod h1:6dJC0mAP4ikYIbvyc7fijjWJddQyLn8Ig3JB5CqoB9Q=
github.com/modern-go/reflect2 v0.0.0-20180701023420-4b7aa43c6742/go.mod h1:bx2lNnkwVCuqBIxFjflWJWanXIb3RllmbCylyMrvgv0=
github.com/modern-go/reflect2 v1.0.1 h1:9f412s+6RmYXLWZSEzVVgPGK7C2PphHj5RJrvfx9AWI=
github.com/modern-go/reflect2 v1.0.1/go.mod h1:bx2lNnkwVCuqBIxFjflWJWanXIb3RllmbCylyMrvgv0=
github.com/munnerz/goautoneg v0.0.0-20120707110453-a547fc61f48d/go.mod h1:+n7T8mK8HuQTcFwEeznm/DIxMOiR9yIdICNftLE1DvQ=
github.com/mwitkow/go-conntrack v0.0.0-20161129095857-cc309e4a2223/go.mod h1:qRWi+5nqEBWmkhHvq77mSJWrCKwh8bxhgT7d/eI7P4U=
github.com/mxk/go-flowrate v0.0.0-20140419014527-cca7078d478f/go.mod h1:ZdcZmHo+o7JKHSa8/e818NopupXU1YMK5fe1lsApnBw=
github.com/onsi/ginkgo v0.0.0-20170829012221-11459a886d9c/go.mod h1:lLunBs/Ym6LB5Z9jYTR76FiuTmxDTDusOGeTQH+WWjE=
github.com/onsi/ginkgo v1.6.0/go.mod h1:lLunBs/Ym6LB5Z9jYTR76FiuTmxDTDusOGeTQH+WWjE=
github.com/onsi/ginkgo v1.11.0/go.mod h1:lLunBs/Ym6LB5Z9jYTR76FiuTmxDTDusOGeTQH+WWjE=
github.com/onsi/gomega v0.0.0-20170829124025-dcabb60a477c/go.mod h1:C1qb7wdrVGGVU+Z6iS04AVkA3Q65CEZX59MT0QO5uiA=
github.com/onsi/gomega v1.7.0/go.mod h1:ex+gbHU/CVuBBDIJjb2X0qEXbFg53c61hWP/1CpauHY=
github.com/opentracing/opentracing-go v1.1.0/go.mod h1:UkNAQd3GIcIGf0SeVgPpRdFStlNbqXla1AfSYxPUl2o=
github.com/peterbourgon/diskv v2.0.1+incompatible/go.mod h1:uqqh8zWWbv1HBMNONnaR/tNboyR3/BZd58JJSHlUSCU=
github.com/pkg/errors v0.8.0/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
github.com/pkg/errors v0.8.1/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
github.com/pkg/errors v0.9.1 h1:FEBLx1zS214owpjy7qsBeixbURkuhQAwrK5UwLGTwt4=
github.com/pkg/errors v0.9.1/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
github.com/prometheus/client_golang v0.9.1/go.mod h1:7SWBe2y4D6OKWSNQJUaRYU/AaXPKyh/dDVn+NZz0KFw=
github.com/prometheus/client_golang v1.0.0/go.mod h1:db9x61etRT2tGnBNRi70OPL5FsnadC4Ky3P0J6CfImo=
github.com/prometheus/client_golang v1.7.1 h1:NTGy1Ja9pByO+xAeH/qiWnLrKtr3hJPNjaVUwnjpdpA=
github.com/prometheus/client_golang v1.7.1/go.mod h1:PY5Wy2awLA44sXw4AOSfFBetzPP4j5+D6mVACh+pe2M=
github.com/prometheus/client_model v0.0.0-20180712105110-5c3871d89910/go.mod h1:MbSGuTsp3dbXC40dX6PRTWyKYBIrTGTE9sqQNg2J8bo=
github.com/prometheus/client_model v0.0.0-20190129233127-fd36f4220a90/go.mod h1:xMI15A0UPsDsEKsMN9yxemIoYk6Tm2C1GtYGdfGttqA=
github.com/prometheus/client_model v0.0.0-20190812154241-14fe0d1b01d4/go.mod h1:xMI15A0UPsDsEKsMN9yxemIoYk6Tm2C1GtYGdfGttqA=
github.com/prometheus/client_model v0.2.0 h1:uq5h0d+GuxiXLJLNABMgp2qUWDPiLvgCzz2dUR+/W/M=
github.com/prometheus/client_model v0.2.0/go.mod h1:xMI15A0UPsDsEKsMN9yxemIoYk6Tm2C1GtYGdfGttqA=
github.com/prometheus/common v0.4.1/go.mod h1:TNfzLD0ON7rHzMJeJkieUDPYmFC7Snx/y86RQel1bk4=
github.com/prometheus/common v0.10.0 h1:RyRA7RzGXQZiW+tGMr7sxa85G1z0yOpM1qq5c8lNawc=
github.com/prometheus/common v0.10.0/go.mod h1:Tlit/dnDKsSWFlCLTWaA1cyBgKHSMdTB80sz/V91rCo=
github.com/prometheus/procfs v0.0.0-20181005140218-185b4288413d/go.mod h1:c3At6R/oaqEKCNdg8wHV1ftS6bRYblBhIjjI8uT2IGk=
github.com/prometheus/procfs v0.0.2/go.mod h1:TjEm7ze935MbeOT/UhFTIMYKhuLP4wbCsTZCD3I8kEA=
github.com/prometheus/procfs v0.1.3 h1:F0+tqvhOksq22sc6iCHF5WGlWjdwj92p0udFh1VFBS8=
github.com/prometheus/procfs v0.1.3/go.mod h1:lV6e/gmhEcM9IjHGsFOCxxuZ+z1YqCvr4OA4YeYWdaU=
github.com/rogpeppe/fastuuid v1.2.0/go.mod h1:jVj6XXZzXRy/MSR5jhDC/2q6DgLz+nrA6LYCDYWNEvQ=
github.com/rogpeppe/go-internal v1.3.0/go.mod h1:M8bDsm7K2OlrFYOpmOWEs/qY81heoFRclV5y23lUDJ4=
github.com/sirupsen/logrus v1.2.0/go.mod h1:LxeOpSwHxABJmUn/MG1IvRgCAasNZTLOkJPxbbu5VWo=
github.com/sirupsen/logrus v1.4.2/go.mod h1:tLMulIdttU9McNUspp0xgXVQah82FyeX6MwdIuYE2rE=
github.com/sirupsen/logrus v1.6.0 h1:UBcNElsrwanuuMsnGSlYmtmgbb23qDR5dG+6X6Oo89I=
github.com/sirupsen/logrus v1.6.0/go.mod h1:7uNnSEd1DgxDLC74fIahvMZmmYsHGZGEOFrfsX/uA88=
github.com/soheilhy/cmux v0.1.5 h1:jjzc5WVemNEDTLwv9tlmemhC73tI08BNOIGwBOo10Js=
github.com/soheilhy/cmux v0.1.5/go.mod h1:T7TcVDs9LWfQgPlPsdngu6I6QIoyIFZDDC6sNE1GqG0=
github.com/spf13/afero v1.2.2/go.mod h1:9ZxEEn6pIJ8Rxe320qSDBk6AsU0r9pR7Q4OcevTdifk=
github.com/spf13/pflag v0.0.0-20170130214245-9ff6c6923cff/go.mod h1:DYY7MBk1bdzusC3SYhjObp+wFpr4gzcvqqNjLnInEg4=
github.com/spf13/pflag v1.0.3/go.mod h1:DYY7MBk1bdzusC3SYhjObp+wFpr4gzcvqqNjLnInEg4=
github.com/spf13/pflag v1.0.5/go.mod h1:McXfInJRrz4CZXVZOBLb0bTZqETkiAhM9Iw0y3An2Bg=
github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
github.com/stretchr/objx v0.1.1/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
github.com/stretchr/testify v1.2.2/go.mod h1:a8OnRcib4nhh0OaRAV+Yts87kKdq0PP7pXfy6kDkUVs=
github.com/stretchr/testify v1.3.0/go.mod h1:M5WIy9Dh21IEIfnGCwXGc5bZfKNJtfHm1UVUgZn+9EI=
github.com/stretchr/testify v1.4.0/go.mod h1:j7eGeouHqKxXV5pUuKE4zz7dFj8WfuZ+81PSLYec5m4=
github.com/stretchr/testify v1.5.1 h1:nOGnQDM7FYENwehXlg/kFVnos3rEvtKTjRvOWSzb6H4=
github.com/stretchr/testify v1.5.1/go.mod h1:5W2xD1RspED5o8YsWQXVCued0rvSQ+mT+I5cxcmMvtA=
github.com/tmc/grpc-websocket-proxy v0.0.0-20201229170055-e5319fda7802 h1:uruHq4dN7GR16kFc5fp3d1RIYzJW5onx8Ybykw2YQFA=
github.com/tmc/grpc-websocket-proxy v0.0.0-20201229170055-e5319fda7802/go.mod h1:ncp9v5uamzpCO7NfCPTXjqaC+bZgJeR0sMTm6dMHP7U=
github.com/xiang90/probing v0.0.0-20190116061207-43a291ad63a2 h1:eY9dn8+vbi4tKz5Qo6v2eYzo7kUS51QINcR5jNpbZS8=
github.com/xiang90/probing v0.0.0-20190116061207-43a291ad63a2/go.mod h1:UETIi67q53MR2AWcXfiuqkDkRtnGDLqkBTpCHuJHxtU=
github.com/yuin/goldmark v1.1.27/go.mod h1:3hX8gzYuyVAZsxl0MRgGTJEmQBFcNTphYh9decYSb74=
github.com/yuin/goldmark v1.2.1/go.mod h1:3hX8gzYuyVAZsxl0MRgGTJEmQBFcNTphYh9decYSb74=
go.etcd.io/bbolt v1.3.5 h1:XAzx9gjCb0Rxj7EoqcClPD1d5ZBxZJk0jbuoPHenBt0=
go.etcd.io/bbolt v1.3.5/go.mod h1:G5EMThwa9y8QZGBClrRx5EY+Yw9kAhnjy3bSjsnlVTQ=
go.etcd.io/etcd v3.3.25+incompatible h1:V1RzkZJj9LqsJRy+TUBgpWSbZXITLB819lstuTFoZOY=
go.etcd.io/etcd v3.3.25+incompatible/go.mod h1:yaeTdrJi5lOmYerz05bd8+V7KubZs8YSFZfzsF9A6aI=
go.opencensus.io v0.21.0/go.mod h1:mSImk1erAIZhrmZN+AvHh14ztQfjbGwt4TtuofqLduU=
go.opencensus.io v0.22.0/go.mod h1:+kGneAE2xo2IficOXnaByMWTGM9T73dGwxeWcUqIpI8=
go.opencensus.io v0.22.2/go.mod h1:yxeiOL68Rb0Xd1ddK5vPZ/oVn4vY4Ynel7k9FzqtOIw=
go.uber.org/atomic v1.4.0 h1:cxzIVoETapQEqDhQu3QfnvXAV4AlzcvUCxkVUFw3+EU=
go.uber.org/atomic v1.4.0/go.mod h1:gD2HeocX3+yG+ygLZcrzQJaqmWj9AIm7n08wl/qW/PE=
go.uber.org/multierr v1.1.0 h1:HoEmRHQPVSqub6w2z2d2EOVs2fjyFRGyofhKuyDq0QI=
go.uber.org/multierr v1.1.0/go.mod h1:wR5kodmAFQ0UK8QlbwjlSNy0Z68gJhDJUG5sjR94q/0=
go.uber.org/zap v1.10.0 h1:ORx85nbTijNz8ljznvCMR1ZBIPKFn3jQrag10X2AsuM=
go.uber.org/zap v1.10.0/go.mod h1:vwi/ZaCAaUcBkycHslxD9B2zi4UTXhF60s6SWpuDF0Q=
golang.org/x/crypto v0.0.0-20180904163835-0709b304e793/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
golang.org/x/crypto v0.0.0-20190510104115-cbcb75029529/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
golang.org/x/crypto v0.0.0-20190605123033-f99c8df09eb5/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
golang.org/x/crypto v0.0.0-20191011191535-87dc89f01550/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
golang.org/x/crypto v0.0.0-20191206172530-e9b2fee46413/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9 h1:psW17arqaxU48Z5kZ0CQnkZWQJsqcURM6tKiBApRjXI=
golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
golang.org/x/exp v0.0.0-20190121172915-509febef88a4/go.mod h1:CJ0aWSM057203Lf6IL+f9T1iT9GByDxfZKAQTCR3kQA=
golang.org/x/exp v0.0.0-20190306152737-a1d7652674e8/go.mod h1:CJ0aWSM057203Lf6IL+f9T1iT9GByDxfZKAQTCR3kQA=
golang.org/x/exp v0.0.0-20190510132918-efd6b22b2522/go.mod h1:ZjyILWgesfNpC6sMxTJOJm9Kp84zZh5NQWvqDGG3Qr8=
golang.org/x/exp v0.0.0-20190829153037-c13cbed26979/go.mod h1:86+5VVa7VpoJ4kLfm080zCjGlMRFzhUhsZKEZO7MGek=
golang.org/x/exp v0.0.0-20191227195350-da58074b4299/go.mod h1:2RIsYlXP63K8oxa1u096TMicItID8zy7Y6sNkU49FU4=
golang.org/x/image v0.0.0-20190227222117-0694c2d4d067/go.mod h1:kZ7UVZpmo3dzQBMxlp+ypCbDeSB+sBbTgSJuh5dn5js=
golang.org/x/image v0.0.0-20190802002840-cff245a6509b/go.mod h1:FeLwcggjj3mMvU+oOTbSwawSJRM1uh48EjtB4UJZlP0=
golang.org/x/lint v0.0.0-20190227174305-5b3e6a55c961/go.mod h1:wehouNa3lNwaWXcvxsM5YxQ5yQlVC4a0KAMCusXpPoU=
golang.org/x/lint v0.0.0-20190301231843-5614ed5bae6f/go.mod h1:UVdnD1Gm6xHRNCYTkRU2/jEulfH38KcIWyp/GAMgvoE=
golang.org/x/lint v0.0.0-20190313153728-d0100b6bd8b3/go.mod h1:6SW0HCj/g11FgYtHlgUYUwCkIfeOF89ocIRzGO/8vkc=
golang.org/x/lint v0.0.0-20190409202823-959b441ac422/go.mod h1:6SW0HCj/g11FgYtHlgUYUwCkIfeOF89ocIRzGO/8vkc=
golang.org/x/lint v0.0.0-20190909230951-414d861bb4ac/go.mod h1:6SW0HCj/g11FgYtHlgUYUwCkIfeOF89ocIRzGO/8vkc=
golang.org/x/lint v0.0.0-20191125180803-fdd1cda4f05f/go.mod h1:5qLYkcX4OjUUV8bRuDixDT3tpyyb+LUpUlRWLxfhWrs=
golang.org/x/mobile v0.0.0-20190312151609-d3739f865fa6/go.mod h1:z+o9i4GpDbdi3rU15maQ/Ox0txvL9dWGYEHz965HBQE=
golang.org/x/mobile v0.0.0-20190719004257-d2bd2a29d028/go.mod h1:E/iHnbuqvinMTCcRqshq8CkpyQDoeVncDDYHnLhea+o=
golang.org/x/mod v0.0.0-20190513183733-4bf6d317e70e/go.mod h1:mXi4GBBbnImb6dmsKGUJ2LatrhH/nqhxcFungHvyanc=
golang.org/x/mod v0.1.0/go.mod h1:0QHyrYULN0/3qlju5TqG8bIK38QM8yzMo5ekMj3DlcY=
golang.org/x/mod v0.1.1-0.20191105210325-c90efee705ee/go.mod h1:QqPTAvyqsEbceGzBzNggFXnrqF1CaUcvgkdR5Ot7KZg=
golang.org/x/mod v0.2.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
golang.org/x/mod v0.3.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
golang.org/x/net v0.0.0-20180724234803-3673e40ba225/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
golang.org/x/net v0.0.0-20180906233101-161cd47e91fd/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
golang.org/x/net v0.0.0-20181114220301-adae6a3d119a/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
golang.org/x/net v0.0.0-20190108225652-1e06a53dbb7e/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
golang.org/x/net v0.0.0-20190213061140-3a22650c66bd/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
golang.org/x/net v0.0.0-20190311183353-d8887717615a/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
golang.org/x/net v0.0.0-20190501004415-9ce7a6920f09/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
golang.org/x/net v0.0.0-20190503192946-f4e77d36d62c/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
golang.org/x/net v0.0.0-20190603091049-60506f45cf65/go.mod h1:HSz+uSET+XFnRR8LxR5pz3Of3rY3CfYBVs4xY44aLks=
golang.org/x/net v0.0.0-20190613194153-d28f0bde5980/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
golang.org/x/net v0.0.0-20190620200207-3b0461eec859/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
golang.org/x/net v0.0.0-20191209160850-c0dbc17a3553/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
golang.org/x/net v0.0.0-20200226121028-0de0cce0169b/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
golang.org/x/net v0.0.0-20200324143707-d3edc9973b7e/go.mod h1:qpuaurCH72eLCgpAm/N6yyVIVM9cpaDIP3A8BGJEC5A=
golang.org/x/net v0.0.0-20200707034311-ab3426394381 h1:VXak5I6aEWmAXeQjA+QSZzlgNrpq9mjcfDemuexIKsU=
golang.org/x/net v0.0.0-20200707034311-ab3426394381/go.mod h1:/O7V0waA8r7cgGh81Ro3o1hOxt32SMVPicZroKQ2sZA=
golang.org/x/net v0.0.0-20200822124328-c89045814202/go.mod h1:/O7V0waA8r7cgGh81Ro3o1hOxt32SMVPicZroKQ2sZA=
golang.org/x/net v0.0.0-20201021035429-f5854403a974/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
golang.org/x/net v0.0.0-20201202161906-c7110b5ffcbb h1:eBmm0M9fYhWpKZLjQUUKka/LtIxf46G4fxeEz5KJr9U=
golang.org/x/net v0.0.0-20201202161906-c7110b5ffcbb/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
golang.org/x/oauth2 v0.0.0-20180821212333-d2e6202438be/go.mod h1:N/0e6XlmueqKjAGxoOufVs8QHGRruUQn6yWY3a++T0U=
golang.org/x/oauth2 v0.0.0-20190226205417-e64efc72b421/go.mod h1:gOpvHmFTYa4IltrdGE7lF6nIHvwfUNPOp7c8zoXwtLw=
golang.org/x/oauth2 v0.0.0-20190604053449-0f29369cfe45/go.mod h1:gOpvHmFTYa4IltrdGE7lF6nIHvwfUNPOp7c8zoXwtLw=
golang.org/x/oauth2 v0.0.0-20191202225959-858c2ad4c8b6/go.mod h1:gOpvHmFTYa4IltrdGE7lF6nIHvwfUNPOp7c8zoXwtLw=
golang.org/x/oauth2 v0.0.0-20200107190931-bf48bf16ab8d/go.mod h1:gOpvHmFTYa4IltrdGE7lF6nIHvwfUNPOp7c8zoXwtLw=
golang.org/x/sync v0.0.0-20180314180146-1d60e4601c6f/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20181108010431-42b317875d0f/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20190227155943-e225da77a7e6/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20190911185100-cd5d95a43a6e/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
golang.org/x/sys v0.0.0-20180905080454-ebe1bf3edb33/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
golang.org/x/sys v0.0.0-20180909124046-d0be0721c37e/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
golang.org/x/sys v0.0.0-20181116152217-5ac8a444bdc5/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
golang.org/x/sys v0.0.0-20190312061237-fead79001313/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190422165155-953cdadca894/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190502145724-3ef323f4f1fd/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190507160741-ecd444e8653b/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190606165138-5da285871e9c/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20190624142023-c5567b49c5d0/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20191005200804-aed5e4c7ecf9/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20191204072324-ce4227a45e2e/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20191228213918-04cbcbbfeed8/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200106162015-b016eb3dc98e/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200202164722-d101bd2416d5/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200302150141-5c8b2ff67527/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200323222414-85ca7c5b95cd/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200615200032-f1bc736245b1/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200622214017-ed371f2e16b4 h1:5/PjkGUjvEU5Gl6BxmvKRPpqo2uNMv4rcHBMwzk/st8=
golang.org/x/sys v0.0.0-20200622214017-ed371f2e16b4/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20200930185726-fdedc70b468f h1:+Nyd8tzPX9R7BWHguqsrbFdRx3WQ/1ib8I44HXV5yTA=
golang.org/x/sys v0.0.0-20200930185726-fdedc70b468f/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
golang.org/x/text v0.3.1-0.20180807135948-17ff2d5776d2/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
golang.org/x/text v0.3.2/go.mod h1:bEr9sfX3Q8Zfm5fL9x+3itogRgK3+ptLWKqgva+5dAk=
golang.org/x/text v0.3.3 h1:cokOdA+Jmi5PJGXLlLllQSgYigAEfHXJAERHVMaCc2k=
golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
golang.org/x/time v0.0.0-20181108054448-85acf8d2951c/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
golang.org/x/time v0.0.0-20190308202827-9d24e82272b4/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
golang.org/x/time v0.0.0-20191024005414-555d28b269f0 h1:/5xXl8Y5W96D+TtHSlonuFqGHIWVuyCkGJLwGh9JJFs=
golang.org/x/time v0.0.0-20191024005414-555d28b269f0/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
golang.org/x/tools v0.0.0-20181011042414-1f849cf54d09/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
golang.org/x/tools v0.0.0-20181030221726-6c7e314b6563/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
golang.org/x/tools v0.0.0-20190226205152-f727befe758c/go.mod h1:9Yl7xja0Znq3iFh3HoIrodX9oNMXvdceNzlUR8zjMvY=
golang.org/x/tools v0.0.0-20190311212946-11955173bddd/go.mod h1:LCzVGOaR6xXOjkQ3onu1FJEFr0SW1gC7cKk1uF8kGRs=
golang.org/x/tools v0.0.0-20190312151545-0bb0c0a6e846/go.mod h1:LCzVGOaR6xXOjkQ3onu1FJEFr0SW1gC7cKk1uF8kGRs=
golang.org/x/tools v0.0.0-20190312170243-e65039ee4138/go.mod h1:LCzVGOaR6xXOjkQ3onu1FJEFr0SW1gC7cKk1uF8kGRs=
golang.org/x/tools v0.0.0-20190425150028-36563e24a262/go.mod h1:RgjU9mgBXZiqYHBnxXauZ1Gv1EHHAz9KjViQ78xBX0Q=
golang.org/x/tools v0.0.0-20190506145303-2d16b83fe98c/go.mod h1:RgjU9mgBXZiqYHBnxXauZ1Gv1EHHAz9KjViQ78xBX0Q=
golang.org/x/tools v0.0.0-20190524140312-2c0ae7006135/go.mod h1:RgjU9mgBXZiqYHBnxXauZ1Gv1EHHAz9KjViQ78xBX0Q=
golang.org/x/tools v0.0.0-20190606124116-d0a3d012864b/go.mod h1:/rFqwRUd4F7ZHNgwSSTFct+R/Kf4OFW1sUzUTQQTgfc=
golang.org/x/tools v0.0.0-20190621195816-6e04913cbbac/go.mod h1:/rFqwRUd4F7ZHNgwSSTFct+R/Kf4OFW1sUzUTQQTgfc=
golang.org/x/tools v0.0.0-20190624222133-a101b041ded4/go.mod h1:/rFqwRUd4F7ZHNgwSSTFct+R/Kf4OFW1sUzUTQQTgfc=
golang.org/x/tools v0.0.0-20190628153133-6cdbf07be9d0/go.mod h1:/rFqwRUd4F7ZHNgwSSTFct+R/Kf4OFW1sUzUTQQTgfc=
golang.org/x/tools v0.0.0-20190816200558-6889da9d5479/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20190911174233-4f2ddba30aff/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20191012152004-8de300cfc20a/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20191119224855-298f0cb1881e/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20191125144606-a911d9008d1f/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
golang.org/x/tools v0.0.0-20191227053925-7b8e75db28f4/go.mod h1:TB2adYChydJhpapKDTa4BR/hXlZSLoq2Wpct/0txZ28=
golang.org/x/tools v0.0.0-20200619180055-7c47624df98f/go.mod h1:EkVYQZoAsY45+roYkvgYkIh4xh/qjgUK9TdY2XT94GE=
golang.org/x/tools v0.0.0-20210106214847-113979e3529a/go.mod h1:emZCQorbCU4vsT4fOWvOPXz4eW1wZW4PmDk9uLelYpA=
golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
golang.org/x/xerrors v0.0.0-20191011141410-1b5146add898/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543 h1:E7g+9GITq07hpfrRu66IVDexMakfv52eLZ2CXBWiKr4=
golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1 h1:go1bK/D/BFZV2I8cIQd1NKEZ+0owSTG1fDTci4IqFcE=
golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
google.golang.org/api v0.4.0/go.mod h1:8k5glujaEP+g9n7WNsDg8QP6cUVNI86fCNMcbazEtwE=
google.golang.org/api v0.7.0/go.mod h1:WtwebWUNSVBH/HAw79HIFXZNqEvBhG+Ra+ax0hx3E3M=
google.golang.org/api v0.8.0/go.mod h1:o4eAsZoiT+ibD93RtjEohWalFOjRDx6CVaqeizhEnKg=
google.golang.org/api v0.9.0/go.mod h1:o4eAsZoiT+ibD93RtjEohWalFOjRDx6CVaqeizhEnKg=
google.golang.org/api v0.15.0/go.mod h1:iLdEw5Ide6rF15KTC1Kkl0iskquN2gFfn9o9XIsbkAI=
google.golang.org/appengine v1.4.0/go.mod h1:xpcJRLb0r/rnEns0DIKYYv+WjYCduHsrkT7/EB5XEv4=
google.golang.org/appengine v1.5.0/go.mod h1:xpcJRLb0r/rnEns0DIKYYv+WjYCduHsrkT7/EB5XEv4=
google.golang.org/appengine v1.6.1/go.mod h1:i06prIuMbXzDqacNJfV5OdTW448YApPu5ww/cMBSeb0=
google.golang.org/appengine v1.6.5/go.mod h1:8WjMMxjGQR8xUklV/ARdw2HLXBOI7O7uCIDZVag1xfc=
google.golang.org/genproto v0.0.0-20190307195333-5fe7a883aa19/go.mod h1:VzzqZJRnGkLBvHegQrXjBqPurQTc5/KpmUdxsrq26oE=
google.golang.org/genproto v0.0.0-20190418145605-e7d98fc518a7/go.mod h1:VzzqZJRnGkLBvHegQrXjBqPurQTc5/KpmUdxsrq26oE=
google.golang.org/genproto v0.0.0-20190425155659-357c62f0e4bb/go.mod h1:VzzqZJRnGkLBvHegQrXjBqPurQTc5/KpmUdxsrq26oE=
google.golang.org/genproto v0.0.0-20190502173448-54afdca5d873/go.mod h1:VzzqZJRnGkLBvHegQrXjBqPurQTc5/KpmUdxsrq26oE=
google.golang.org/genproto v0.0.0-20190801165951-fa694d86fc64/go.mod h1:DMBHOl98Agz4BDEuKkezgsaosCRResVns1a3J2ZsMNc=
google.golang.org/genproto v0.0.0-20190819201941-24fa4b261c55/go.mod h1:DMBHOl98Agz4BDEuKkezgsaosCRResVns1a3J2ZsMNc=
google.golang.org/genproto v0.0.0-20190911173649-1774047e7e51/go.mod h1:IbNlFCBrqXvoKpeg0TB2l7cyZUmoaFKYIwrEpbDKLA8=
google.golang.org/genproto v0.0.0-20191230161307-f3c370f40bfb/go.mod h1:n3cpQtvxv34hfy77yVDNjmbRyujviMdxYliBSkLhpCc=
google.golang.org/genproto v0.0.0-20200423170343-7949de9c1215/go.mod h1:55QSHmfGQM9UVYDPBsyGGes0y52j32PQ3BqQfXhyH3c=
google.golang.org/genproto v0.0.0-20200513103714-09dca8ec2884/go.mod h1:55QSHmfGQM9UVYDPBsyGGes0y52j32PQ3BqQfXhyH3c=
google.golang.org/genproto v0.0.0-20200526211855-cb27e3aa2013 h1:+kGHl1aib/qcwaRi1CbqBZ1rk19r85MNUf8HaBghugY=
google.golang.org/genproto v0.0.0-20200526211855-cb27e3aa2013/go.mod h1:NbSheEEYHJ7i3ixzK3sjbqSGDJWnxyFXZblF3eUsNvo=
google.golang.org/grpc v1.25.1 h1:wdKvqQk7IttEw92GoRyKG2IDrUIpgpj6H6m81yfeMW0=
google.golang.org/grpc v1.25.1/go.mod h1:c3i+UQWmh7LiEpx4sFZnkU36qjEYZ0imhYfXVyQciAY=
google.golang.org/protobuf v0.0.0-20200109180630-ec00e32a8dfd/go.mod h1:DFci5gLYBciE7Vtevhsrf46CRTquxDuWsQurQQe4oz8=
google.golang.org/protobuf v0.0.0-20200221191635-4d8936d0db64/go.mod h1:kwYJMbMJ01Woi6D6+Kah6886xMZcty6N08ah7+eCXa0=
google.golang.org/protobuf v0.0.0-20200228230310-ab0ca4ff8a60/go.mod h1:cfTl7dwQJ+fmap5saPgwCLgHXTUD7jkjRqWcaiX5VyM=
google.golang.org/protobuf v1.20.1-0.20200309200217-e05f789c0967/go.mod h1:A+miEFZTKqfCUM6K7xSMQL9OKL/b6hQv+e19PK+JZNE=
google.golang.org/protobuf v1.21.0/go.mod h1:47Nbq4nVaFHyn7ilMalzfO3qCViNmqZ2kzikPIcrTAo=
google.golang.org/protobuf v1.22.0/go.mod h1:EGpADcykh3NcUnDUJcl1+ZksZNG86OlYog2l/sGQquU=
google.golang.org/protobuf v1.23.0/go.mod h1:EGpADcykh3NcUnDUJcl1+ZksZNG86OlYog2l/sGQquU=
google.golang.org/protobuf v1.23.1-0.20200526195155-81db48ad09cc/go.mod h1:EGpADcykh3NcUnDUJcl1+ZksZNG86OlYog2l/sGQquU=
google.golang.org/protobuf v1.24.0 h1:UhZDfRO8JRQru4/+LlLE0BRKGF8L+PICnvYZmx/fEGA=
google.golang.org/protobuf v1.24.0/go.mod h1:r/3tXBNzIEhYS9I1OUVjXDlt8tc493IdKGjtUeSXeh4=
gopkg.in/alecthomas/kingpin.v2 v2.2.6/go.mod h1:FMv+mEhP44yOT+4EoQTLFTRgOQ1FBLkstjWtayDeSgw=
gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
gopkg.in/check.v1 v1.0.0-20180628173108-788fd7840127/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15 h1:YR8cESwS4TdDjEe65xsg0ogRM/Nc3DYOhEAlW+xobZo=
gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
gopkg.in/errgo.v2 v2.1.0/go.mod h1:hNsd1EY+bozCKY1Ytp96fpM3vjJbqLJn88ws8XvfDNI=
gopkg.in/fsnotify.v1 v1.4.7/go.mod h1:Tz8NjZHkW78fSQdbUxIjBTcgA1z1m8ZHf0WmKUhAMys=
gopkg.in/inf.v0 v0.9.1/go.mod h1:cWUDdTG/fYaXco+Dcufb5Vnc6Gp2YChqWtbxRZE0mXw=
gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7/go.mod h1:dt/ZhP58zS4L8KSrWDmTeBkI65Dw0HsyUHuEVlX15mw=
gopkg.in/yaml.v2 v2.2.1/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v2 v2.2.3/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v2 v2.2.4/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v2 v2.2.5/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gopkg.in/yaml.v2 v2.2.8 h1:obN1ZagJSUGI0Ek/LBmuj4SNLPfIny3KsKFopxRdj10=
gopkg.in/yaml.v2 v2.2.8/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
gotest.tools v2.2.0+incompatible/go.mod h1:DsYFclhRJ6vuDpmuTbkuFWG+y2sxOXAzmJt81HFBacw=
gotest.tools/v3 v3.0.2/go.mod h1:3SzNCllyD9/Y+b5r9JIKQ474KzkZyqLqEfYqMsX94Bk=
honnef.co/go/tools v0.0.0-20190102054323-c2f93a96b099/go.mod h1:rf3lG4BRIbNafJWhAfAdb/ePZxsR/4RtNHQocxwk9r4=
honnef.co/go/tools v0.0.0-20190106161140-3f1c8253044a/go.mod h1:rf3lG4BRIbNafJWhAfAdb/ePZxsR/4RtNHQocxwk9r4=
honnef.co/go/tools v0.0.0-20190418001031-e561f6794a2a/go.mod h1:rf3lG4BRIbNafJWhAfAdb/ePZxsR/4RtNHQocxwk9r4=
honnef.co/go/tools v0.0.0-20190523083050-ea95bdfd59fc/go.mod h1:rf3lG4BRIbNafJWhAfAdb/ePZxsR/4RtNHQocxwk9r4=
honnef.co/go/tools v0.0.1-2019.2.3/go.mod h1:a3bituU0lyd329TUQxRnasdCoJDkEUEAqEt0JzvZhAg=
k8s.io/api v0.19.0/go.mod h1:I1K45XlvTrDjmj5LoM5LuP/KYrhWbjUKT/SoPG0qTjw=
k8s.io/apimachinery v0.19.0/go.mod h1:DnPGDnARWFvYa3pMHgSxtbZb7gpzzAZ1pTfaUNDVlmA=
k8s.io/client-go v0.19.0/go.mod h1:H9E/VT95blcFQnlyShFgnFT9ZnJOAceiUHM3MlRC+mU=
k8s.io/component-base v0.19.0/go.mod h1:dKsY8BxkA+9dZIAh2aWJLL/UdASFDNtGYTCItL4LM7Y=
k8s.io/gengo v0.0.0-20200413195148-3a45101e95ac/go.mod h1:ezvh/TsK7cY6rbqRK0oQQ8IAqLxYwwyPxAX1Pzy0ii0=
k8s.io/klog v1.0.0 h1:Pt+yjF5aB1xDSVbau4VsWe+dQNzA0qv1LlXdC2dF6Q8=
k8s.io/klog v1.0.0/go.mod h1:4Bi6QPql/J/LkTDqv7R/cd3hPo4k2DG6Ptcz060Ez5I=
k8s.io/klog/v2 v2.0.0/go.mod h1:PBfzABfn139FHAV07az/IF9Wp1bkk3vpT2XSJ76fSDE=
k8s.io/klog/v2 v2.2.0 h1:XRvcwJozkgZ1UQJmfMGpvRthQHOvihEhYtDfAaxMz/A=
k8s.io/klog/v2 v2.2.0/go.mod h1:Od+F08eJP+W3HUb4pSrPpgp9DGU4GzlpG/TmITuYh/Y=
k8s.io/kube-openapi v0.0.0-20200805222855-6aeccd4b50c6/go.mod h1:UuqjUnNftUyPE5H64/qeyjQoUZhGpeFDVdxjTeEVN2o=
k8s.io/utils v0.0.0-20200729134348-d5654de09c73/go.mod h1:jPW/WVKK9YHAvNhRxK0md/EJ228hCsBRufyofKtW8HA=
k8s.io/utils v0.0.0-20210305010621-2afb4311ab10 h1:u5rPykqiCpL+LBfjRkXvnK71gOgIdmq3eHUEkPrbeTI=
k8s.io/utils v0.0.0-20210305010621-2afb4311ab10/go.mod h1:jPW/WVKK9YHAvNhRxK0md/EJ228hCsBRufyofKtW8HA=
rsc.io/binaryregexp v0.2.0/go.mod h1:qTv7/COck+e2FymRvadv62gMdZztPaShugOCi3I+8D8=
sigs.k8s.io/structured-merge-diff/v4 v4.0.1/go.mod h1:bJZC9H9iH24zzfZ/41RGcq60oK1F7G282QMXDPYydCw=
sigs.k8s.io/yaml v1.1.0/go.mod h1:UJmg0vDUVViEyp3mgSv9WPwZCDxu4rQW1olrI1uml+o=
sigs.k8s.io/yaml v1.2.0 h1:kr/MCeFWJWTwyaHoR9c8EjH9OumOmoF9YGiZd7lFm/Q=
sigs.k8s.io/yaml v1.2.0/go.mod h1:yfXDCHCao9+ENCvLSE62v9VSji2MKu5jeNfTrofGhJc=

22
csi/src/config.go Normal file
View File

@ -0,0 +1,22 @@
// Copyright (c) Vitaliy Filippov, 2019+
// License: VNPL-1.1 or GNU GPL-2.0+ (see README.md for details)
package vitastor
const (
vitastorCSIDriverName = "csi.vitastor.io"
vitastorCSIDriverVersion = "0.6.17"
)
// Config struct fills the parameters of request or user input
type Config struct
{
Endpoint string
NodeID string
}
// NewConfig returns config struct to initialize new driver
func NewConfig() *Config
{
return &Config{}
}

530
csi/src/controllerserver.go Normal file
View File

@ -0,0 +1,530 @@
// Copyright (c) Vitaliy Filippov, 2019+
// License: VNPL-1.1 or GNU GPL-2.0+ (see README.md for details)
package vitastor
import (
"context"
"encoding/json"
"strings"
"bytes"
"strconv"
"time"
"fmt"
"os"
"os/exec"
"io/ioutil"
"github.com/kubernetes-csi/csi-lib-utils/protosanitizer"
"k8s.io/klog"
"google.golang.org/grpc/codes"
"google.golang.org/grpc/status"
"go.etcd.io/etcd/clientv3"
"github.com/container-storage-interface/spec/lib/go/csi"
)
const (
KB int64 = 1024
MB int64 = 1024 * KB
GB int64 = 1024 * MB
TB int64 = 1024 * GB
ETCD_TIMEOUT time.Duration = 15*time.Second
)
type InodeIndex struct
{
Id uint64 `json:"id"`
PoolId uint64 `json:"pool_id"`
}
type InodeConfig struct
{
Name string `json:"name"`
Size uint64 `json:"size,omitempty"`
ParentPool uint64 `json:"parent_pool,omitempty"`
ParentId uint64 `json:"parent_id,omitempty"`
Readonly bool `json:"readonly,omitempty"`
}
type ControllerServer struct
{
*Driver
}
// NewControllerServer create new instance controller
func NewControllerServer(driver *Driver) *ControllerServer
{
return &ControllerServer{
Driver: driver,
}
}
func GetConnectionParams(params map[string]string) (map[string]string, []string, string)
{
ctxVars := make(map[string]string)
configPath := params["configPath"]
if (configPath == "")
{
configPath = "/etc/vitastor/vitastor.conf"
}
else
{
ctxVars["configPath"] = configPath
}
config := make(map[string]interface{})
if configFD, err := os.Open(configPath); err == nil
{
defer configFD.Close()
data, _ := ioutil.ReadAll(configFD)
json.Unmarshal(data, &config)
}
// Try to load prefix & etcd URL from the config
var etcdUrl []string
if (params["etcdUrl"] != "")
{
ctxVars["etcdUrl"] = params["etcdUrl"]
etcdUrl = strings.Split(params["etcdUrl"], ",")
}
if (len(etcdUrl) == 0)
{
switch config["etcd_address"].(type)
{
case string:
etcdUrl = strings.Split(config["etcd_address"].(string), ",")
case []string:
etcdUrl = config["etcd_address"].([]string)
}
}
etcdPrefix := params["etcdPrefix"]
if (etcdPrefix == "")
{
etcdPrefix, _ = config["etcd_prefix"].(string)
if (etcdPrefix == "")
{
etcdPrefix = "/vitastor"
}
}
else
{
ctxVars["etcdPrefix"] = etcdPrefix
}
return ctxVars, etcdUrl, etcdPrefix
}
// Create the volume
func (cs *ControllerServer) CreateVolume(ctx context.Context, req *csi.CreateVolumeRequest) (*csi.CreateVolumeResponse, error)
{
klog.Infof("received controller create volume request %+v", protosanitizer.StripSecrets(req))
if (req == nil)
{
return nil, status.Errorf(codes.InvalidArgument, "request cannot be empty")
}
if (req.GetName() == "")
{
return nil, status.Error(codes.InvalidArgument, "name is a required field")
}
volumeCapabilities := req.GetVolumeCapabilities()
if (volumeCapabilities == nil)
{
return nil, status.Error(codes.InvalidArgument, "volume capabilities is a required field")
}
etcdVolumePrefix := req.Parameters["etcdVolumePrefix"]
poolId, _ := strconv.ParseUint(req.Parameters["poolId"], 10, 64)
if (poolId == 0)
{
return nil, status.Error(codes.InvalidArgument, "poolId is missing in storage class configuration")
}
volName := etcdVolumePrefix + req.GetName()
volSize := 1 * GB
if capRange := req.GetCapacityRange(); capRange != nil
{
volSize = ((capRange.GetRequiredBytes() + MB - 1) / MB) * MB
}
// FIXME: The following should PROBABLY be implemented externally in a management tool
ctxVars, etcdUrl, etcdPrefix := GetConnectionParams(req.Parameters)
if (len(etcdUrl) == 0)
{
return nil, status.Error(codes.InvalidArgument, "no etcdUrl in storage class configuration and no etcd_address in vitastor.conf")
}
// Connect to etcd
cli, err := clientv3.New(clientv3.Config{
DialTimeout: ETCD_TIMEOUT,
Endpoints: etcdUrl,
})
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to connect to etcd at "+strings.Join(etcdUrl, ",")+": "+err.Error())
}
defer cli.Close()
var imageId uint64 = 0
for
{
// Check if the image exists
ctx, cancel := context.WithTimeout(context.Background(), ETCD_TIMEOUT)
resp, err := cli.Get(ctx, etcdPrefix+"/index/image/"+volName)
cancel()
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to read key from etcd: "+err.Error())
}
if (len(resp.Kvs) > 0)
{
kv := resp.Kvs[0]
var v InodeIndex
err := json.Unmarshal(kv.Value, &v)
if (err != nil)
{
return nil, status.Error(codes.Internal, "invalid /index/image/"+volName+" key in etcd: "+err.Error())
}
poolId = v.PoolId
imageId = v.Id
inodeCfgKey := fmt.Sprintf("/config/inode/%d/%d", poolId, imageId)
ctx, cancel := context.WithTimeout(context.Background(), ETCD_TIMEOUT)
resp, err := cli.Get(ctx, etcdPrefix+inodeCfgKey)
cancel()
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to read key from etcd: "+err.Error())
}
if (len(resp.Kvs) == 0)
{
return nil, status.Error(codes.Internal, "missing "+inodeCfgKey+" key in etcd")
}
var inodeCfg InodeConfig
err = json.Unmarshal(resp.Kvs[0].Value, &inodeCfg)
if (err != nil)
{
return nil, status.Error(codes.Internal, "invalid "+inodeCfgKey+" key in etcd: "+err.Error())
}
if (inodeCfg.Size < uint64(volSize))
{
return nil, status.Error(codes.Internal, "image "+volName+" is already created, but size is less than expected")
}
}
else
{
// Find a free ID
// Create image metadata in a transaction verifying that the image doesn't exist yet AND ID is still free
maxIdKey := fmt.Sprintf("%s/index/maxid/%d", etcdPrefix, poolId)
ctx, cancel := context.WithTimeout(context.Background(), ETCD_TIMEOUT)
resp, err := cli.Get(ctx, maxIdKey)
cancel()
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to read key from etcd: "+err.Error())
}
var modRev int64
var nextId uint64
if (len(resp.Kvs) > 0)
{
var err error
nextId, err = strconv.ParseUint(string(resp.Kvs[0].Value), 10, 64)
if (err != nil)
{
return nil, status.Error(codes.Internal, maxIdKey+" contains invalid ID")
}
modRev = resp.Kvs[0].ModRevision
nextId++
}
else
{
nextId = 1
}
inodeIdxJson, _ := json.Marshal(InodeIndex{
Id: nextId,
PoolId: poolId,
})
inodeCfgJson, _ := json.Marshal(InodeConfig{
Name: volName,
Size: uint64(volSize),
})
ctx, cancel = context.WithTimeout(context.Background(), ETCD_TIMEOUT)
txnResp, err := cli.Txn(ctx).If(
clientv3.Compare(clientv3.ModRevision(fmt.Sprintf("%s/index/maxid/%d", etcdPrefix, poolId)), "=", modRev),
clientv3.Compare(clientv3.CreateRevision(fmt.Sprintf("%s/index/image/%s", etcdPrefix, volName)), "=", 0),
clientv3.Compare(clientv3.CreateRevision(fmt.Sprintf("%s/config/inode/%d/%d", etcdPrefix, poolId, nextId)), "=", 0),
).Then(
clientv3.OpPut(fmt.Sprintf("%s/index/maxid/%d", etcdPrefix, poolId), fmt.Sprintf("%d", nextId)),
clientv3.OpPut(fmt.Sprintf("%s/index/image/%s", etcdPrefix, volName), string(inodeIdxJson)),
clientv3.OpPut(fmt.Sprintf("%s/config/inode/%d/%d", etcdPrefix, poolId, nextId), string(inodeCfgJson)),
).Commit()
cancel()
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to commit transaction in etcd: "+err.Error())
}
if (txnResp.Succeeded)
{
imageId = nextId
break
}
// Start over if the transaction fails
}
}
ctxVars["name"] = volName
volumeIdJson, _ := json.Marshal(ctxVars)
return &csi.CreateVolumeResponse{
Volume: &csi.Volume{
// Ugly, but VolumeContext isn't passed to DeleteVolume :-(
VolumeId: string(volumeIdJson),
CapacityBytes: volSize,
},
}, nil
}
// DeleteVolume deletes the given volume
func (cs *ControllerServer) DeleteVolume(ctx context.Context, req *csi.DeleteVolumeRequest) (*csi.DeleteVolumeResponse, error)
{
klog.Infof("received controller delete volume request %+v", protosanitizer.StripSecrets(req))
if (req == nil)
{
return nil, status.Error(codes.InvalidArgument, "request cannot be empty")
}
ctxVars := make(map[string]string)
err := json.Unmarshal([]byte(req.VolumeId), &ctxVars)
if (err != nil)
{
return nil, status.Error(codes.Internal, "volume ID not in JSON format")
}
volName := ctxVars["name"]
_, etcdUrl, etcdPrefix := GetConnectionParams(ctxVars)
if (len(etcdUrl) == 0)
{
return nil, status.Error(codes.InvalidArgument, "no etcdUrl in storage class configuration and no etcd_address in vitastor.conf")
}
cli, err := clientv3.New(clientv3.Config{
DialTimeout: ETCD_TIMEOUT,
Endpoints: etcdUrl,
})
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to connect to etcd at "+strings.Join(etcdUrl, ",")+": "+err.Error())
}
defer cli.Close()
// Find inode by name
ctx, cancel := context.WithTimeout(context.Background(), ETCD_TIMEOUT)
resp, err := cli.Get(ctx, etcdPrefix+"/index/image/"+volName)
cancel()
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to read key from etcd: "+err.Error())
}
if (len(resp.Kvs) == 0)
{
return nil, status.Error(codes.NotFound, "volume "+volName+" does not exist")
}
var idx InodeIndex
err = json.Unmarshal(resp.Kvs[0].Value, &idx)
if (err != nil)
{
return nil, status.Error(codes.Internal, "invalid /index/image/"+volName+" key in etcd: "+err.Error())
}
// Get inode config
inodeCfgKey := fmt.Sprintf("%s/config/inode/%d/%d", etcdPrefix, idx.PoolId, idx.Id)
ctx, cancel = context.WithTimeout(context.Background(), ETCD_TIMEOUT)
resp, err = cli.Get(ctx, inodeCfgKey)
cancel()
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to read key from etcd: "+err.Error())
}
if (len(resp.Kvs) == 0)
{
return nil, status.Error(codes.NotFound, "volume "+volName+" does not exist")
}
var inodeCfg InodeConfig
err = json.Unmarshal(resp.Kvs[0].Value, &inodeCfg)
if (err != nil)
{
return nil, status.Error(codes.Internal, "invalid "+inodeCfgKey+" key in etcd: "+err.Error())
}
// Delete inode data by invoking vitastor-cli
args := []string{
"rm-data", "--etcd_address", strings.Join(etcdUrl, ","),
"--pool", fmt.Sprintf("%d", idx.PoolId),
"--inode", fmt.Sprintf("%d", idx.Id),
}
if (ctxVars["configPath"] != "")
{
args = append(args, "--config_path", ctxVars["configPath"])
}
c := exec.Command("/usr/bin/vitastor-cli", args...)
var stderr bytes.Buffer
c.Stdout = nil
c.Stderr = &stderr
err = c.Run()
stderrStr := string(stderr.Bytes())
if (err != nil)
{
klog.Errorf("vitastor-cli rm-data failed: %s, status %s\n", stderrStr, err)
return nil, status.Error(codes.Internal, stderrStr+" (status "+err.Error()+")")
}
// Delete inode config in etcd
ctx, cancel = context.WithTimeout(context.Background(), ETCD_TIMEOUT)
txnResp, err := cli.Txn(ctx).Then(
clientv3.OpDelete(fmt.Sprintf("%s/index/image/%s", etcdPrefix, volName)),
clientv3.OpDelete(fmt.Sprintf("%s/config/inode/%d/%d", etcdPrefix, idx.PoolId, idx.Id)),
).Commit()
cancel()
if (err != nil)
{
return nil, status.Error(codes.Internal, "failed to delete keys in etcd: "+err.Error())
}
if (!txnResp.Succeeded)
{
return nil, status.Error(codes.Internal, "failed to delete keys in etcd: transaction failed")
}
return &csi.DeleteVolumeResponse{}, nil
}
// ControllerPublishVolume return Unimplemented error
func (cs *ControllerServer) ControllerPublishVolume(ctx context.Context, req *csi.ControllerPublishVolumeRequest) (*csi.ControllerPublishVolumeResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// ControllerUnpublishVolume return Unimplemented error
func (cs *ControllerServer) ControllerUnpublishVolume(ctx context.Context, req *csi.ControllerUnpublishVolumeRequest) (*csi.ControllerUnpublishVolumeResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// ValidateVolumeCapabilities checks whether the volume capabilities requested are supported.
func (cs *ControllerServer) ValidateVolumeCapabilities(ctx context.Context, req *csi.ValidateVolumeCapabilitiesRequest) (*csi.ValidateVolumeCapabilitiesResponse, error)
{
klog.Infof("received controller validate volume capability request %+v", protosanitizer.StripSecrets(req))
if (req == nil)
{
return nil, status.Errorf(codes.InvalidArgument, "request is nil")
}
volumeID := req.GetVolumeId()
if (volumeID == "")
{
return nil, status.Error(codes.InvalidArgument, "volumeId is nil")
}
volumeCapabilities := req.GetVolumeCapabilities()
if (volumeCapabilities == nil)
{
return nil, status.Error(codes.InvalidArgument, "volumeCapabilities is nil")
}
var volumeCapabilityAccessModes []*csi.VolumeCapability_AccessMode
for _, mode := range []csi.VolumeCapability_AccessMode_Mode{
csi.VolumeCapability_AccessMode_SINGLE_NODE_WRITER,
csi.VolumeCapability_AccessMode_MULTI_NODE_MULTI_WRITER,
} {
volumeCapabilityAccessModes = append(volumeCapabilityAccessModes, &csi.VolumeCapability_AccessMode{Mode: mode})
}
capabilitySupport := false
for _, capability := range volumeCapabilities
{
for _, volumeCapabilityAccessMode := range volumeCapabilityAccessModes
{
if (volumeCapabilityAccessMode.Mode == capability.AccessMode.Mode)
{
capabilitySupport = true
}
}
}
if (!capabilitySupport)
{
return nil, status.Errorf(codes.NotFound, "%v not supported", req.GetVolumeCapabilities())
}
return &csi.ValidateVolumeCapabilitiesResponse{
Confirmed: &csi.ValidateVolumeCapabilitiesResponse_Confirmed{
VolumeCapabilities: req.VolumeCapabilities,
},
}, nil
}
// ListVolumes returns a list of volumes
func (cs *ControllerServer) ListVolumes(ctx context.Context, req *csi.ListVolumesRequest) (*csi.ListVolumesResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// GetCapacity returns the capacity of the storage pool
func (cs *ControllerServer) GetCapacity(ctx context.Context, req *csi.GetCapacityRequest) (*csi.GetCapacityResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// ControllerGetCapabilities returns the capabilities of the controller service.
func (cs *ControllerServer) ControllerGetCapabilities(ctx context.Context, req *csi.ControllerGetCapabilitiesRequest) (*csi.ControllerGetCapabilitiesResponse, error)
{
functionControllerServerCapabilities := func(cap csi.ControllerServiceCapability_RPC_Type) *csi.ControllerServiceCapability
{
return &csi.ControllerServiceCapability{
Type: &csi.ControllerServiceCapability_Rpc{
Rpc: &csi.ControllerServiceCapability_RPC{
Type: cap,
},
},
}
}
var controllerServerCapabilities []*csi.ControllerServiceCapability
for _, capability := range []csi.ControllerServiceCapability_RPC_Type{
csi.ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME,
csi.ControllerServiceCapability_RPC_LIST_VOLUMES,
csi.ControllerServiceCapability_RPC_EXPAND_VOLUME,
csi.ControllerServiceCapability_RPC_CREATE_DELETE_SNAPSHOT,
} {
controllerServerCapabilities = append(controllerServerCapabilities, functionControllerServerCapabilities(capability))
}
return &csi.ControllerGetCapabilitiesResponse{
Capabilities: controllerServerCapabilities,
}, nil
}
// CreateSnapshot create snapshot of an existing PV
func (cs *ControllerServer) CreateSnapshot(ctx context.Context, req *csi.CreateSnapshotRequest) (*csi.CreateSnapshotResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// DeleteSnapshot delete provided snapshot of a PV
func (cs *ControllerServer) DeleteSnapshot(ctx context.Context, req *csi.DeleteSnapshotRequest) (*csi.DeleteSnapshotResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// ListSnapshots list the snapshots of a PV
func (cs *ControllerServer) ListSnapshots(ctx context.Context, req *csi.ListSnapshotsRequest) (*csi.ListSnapshotsResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// ControllerExpandVolume resizes a volume
func (cs *ControllerServer) ControllerExpandVolume(ctx context.Context, req *csi.ControllerExpandVolumeRequest) (*csi.ControllerExpandVolumeResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// ControllerGetVolume get volume info
func (cs *ControllerServer) ControllerGetVolume(ctx context.Context, req *csi.ControllerGetVolumeRequest) (*csi.ControllerGetVolumeResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}

137
csi/src/grpc.go Normal file
View File

@ -0,0 +1,137 @@
/*
Copyright 2017 The Kubernetes Authors.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
package vitastor
import (
"fmt"
"net"
"os"
"strings"
"sync"
"github.com/golang/glog"
"golang.org/x/net/context"
"google.golang.org/grpc"
"github.com/container-storage-interface/spec/lib/go/csi"
"github.com/kubernetes-csi/csi-lib-utils/protosanitizer"
)
// Defines Non blocking GRPC server interfaces
type NonBlockingGRPCServer interface {
// Start services at the endpoint
Start(endpoint string, ids csi.IdentityServer, cs csi.ControllerServer, ns csi.NodeServer)
// Waits for the service to stop
Wait()
// Stops the service gracefully
Stop()
// Stops the service forcefully
ForceStop()
}
func NewNonBlockingGRPCServer() NonBlockingGRPCServer {
return &nonBlockingGRPCServer{}
}
// NonBlocking server
type nonBlockingGRPCServer struct {
wg sync.WaitGroup
server *grpc.Server
}
func (s *nonBlockingGRPCServer) Start(endpoint string, ids csi.IdentityServer, cs csi.ControllerServer, ns csi.NodeServer) {
s.wg.Add(1)
go s.serve(endpoint, ids, cs, ns)
return
}
func (s *nonBlockingGRPCServer) Wait() {
s.wg.Wait()
}
func (s *nonBlockingGRPCServer) Stop() {
s.server.GracefulStop()
}
func (s *nonBlockingGRPCServer) ForceStop() {
s.server.Stop()
}
func (s *nonBlockingGRPCServer) serve(endpoint string, ids csi.IdentityServer, cs csi.ControllerServer, ns csi.NodeServer) {
proto, addr, err := ParseEndpoint(endpoint)
if err != nil {
glog.Fatal(err.Error())
}
if proto == "unix" {
addr = "/" + addr
if err := os.Remove(addr); err != nil && !os.IsNotExist(err) {
glog.Fatalf("Failed to remove %s, error: %s", addr, err.Error())
}
}
listener, err := net.Listen(proto, addr)
if err != nil {
glog.Fatalf("Failed to listen: %v", err)
}
opts := []grpc.ServerOption{
grpc.UnaryInterceptor(logGRPC),
}
server := grpc.NewServer(opts...)
s.server = server
if ids != nil {
csi.RegisterIdentityServer(server, ids)
}
if cs != nil {
csi.RegisterControllerServer(server, cs)
}
if ns != nil {
csi.RegisterNodeServer(server, ns)
}
glog.Infof("Listening for connections on address: %#v", listener.Addr())
server.Serve(listener)
}
func ParseEndpoint(ep string) (string, string, error) {
if strings.HasPrefix(strings.ToLower(ep), "unix://") || strings.HasPrefix(strings.ToLower(ep), "tcp://") {
s := strings.SplitN(ep, "://", 2)
if s[1] != "" {
return s[0], s[1], nil
}
}
return "", "", fmt.Errorf("Invalid endpoint: %v", ep)
}
func logGRPC(ctx context.Context, req interface{}, info *grpc.UnaryServerInfo, handler grpc.UnaryHandler) (interface{}, error) {
glog.V(3).Infof("GRPC call: %s", info.FullMethod)
glog.V(5).Infof("GRPC request: %s", protosanitizer.StripSecrets(req))
resp, err := handler(ctx, req)
if err != nil {
glog.Errorf("GRPC error: %v", err)
} else {
glog.V(5).Infof("GRPC response: %s", protosanitizer.StripSecrets(resp))
}
return resp, err
}

60
csi/src/identityserver.go Normal file
View File

@ -0,0 +1,60 @@
// Copyright (c) Vitaliy Filippov, 2019+
// License: VNPL-1.1 or GNU GPL-2.0+ (see README.md for details)
package vitastor
import (
"context"
"github.com/kubernetes-csi/csi-lib-utils/protosanitizer"
"k8s.io/klog"
"github.com/container-storage-interface/spec/lib/go/csi"
)
// IdentityServer struct of Vitastor CSI driver with supported methods of CSI identity server spec.
type IdentityServer struct
{
*Driver
}
// NewIdentityServer create new instance identity
func NewIdentityServer(driver *Driver) *IdentityServer
{
return &IdentityServer{
Driver: driver,
}
}
// GetPluginInfo returns metadata of the plugin
func (is *IdentityServer) GetPluginInfo(ctx context.Context, req *csi.GetPluginInfoRequest) (*csi.GetPluginInfoResponse, error)
{
klog.Infof("received identity plugin info request %+v", protosanitizer.StripSecrets(req))
return &csi.GetPluginInfoResponse{
Name: vitastorCSIDriverName,
VendorVersion: vitastorCSIDriverVersion,
}, nil
}
// GetPluginCapabilities returns available capabilities of the plugin
func (is *IdentityServer) GetPluginCapabilities(ctx context.Context, req *csi.GetPluginCapabilitiesRequest) (*csi.GetPluginCapabilitiesResponse, error)
{
klog.Infof("received identity plugin capabilities request %+v", protosanitizer.StripSecrets(req))
return &csi.GetPluginCapabilitiesResponse{
Capabilities: []*csi.PluginCapability{
{
Type: &csi.PluginCapability_Service_{
Service: &csi.PluginCapability_Service{
Type: csi.PluginCapability_Service_CONTROLLER_SERVICE,
},
},
},
},
}, nil
}
// Probe returns the health and readiness of the plugin
func (is *IdentityServer) Probe(ctx context.Context, req *csi.ProbeRequest) (*csi.ProbeResponse, error)
{
return &csi.ProbeResponse{}, nil
}

293
csi/src/nodeserver.go Normal file
View File

@ -0,0 +1,293 @@
// Copyright (c) Vitaliy Filippov, 2019+
// License: VNPL-1.1 or GNU GPL-2.0+ (see README.md for details)
package vitastor
import (
"context"
"os"
"os/exec"
"encoding/json"
"strings"
"bytes"
"google.golang.org/grpc/codes"
"google.golang.org/grpc/status"
"k8s.io/utils/mount"
utilexec "k8s.io/utils/exec"
"github.com/container-storage-interface/spec/lib/go/csi"
"github.com/kubernetes-csi/csi-lib-utils/protosanitizer"
"k8s.io/klog"
)
// NodeServer struct of Vitastor CSI driver with supported methods of CSI node server spec.
type NodeServer struct
{
*Driver
mounter mount.Interface
}
// NewNodeServer create new instance node
func NewNodeServer(driver *Driver) *NodeServer
{
return &NodeServer{
Driver: driver,
mounter: mount.New(""),
}
}
// NodeStageVolume mounts the volume to a staging path on the node.
func (ns *NodeServer) NodeStageVolume(ctx context.Context, req *csi.NodeStageVolumeRequest) (*csi.NodeStageVolumeResponse, error)
{
return &csi.NodeStageVolumeResponse{}, nil
}
// NodeUnstageVolume unstages the volume from the staging path
func (ns *NodeServer) NodeUnstageVolume(ctx context.Context, req *csi.NodeUnstageVolumeRequest) (*csi.NodeUnstageVolumeResponse, error)
{
return &csi.NodeUnstageVolumeResponse{}, nil
}
func Contains(list []string, s string) bool
{
for i := 0; i < len(list); i++
{
if (list[i] == s)
{
return true
}
}
return false
}
// NodePublishVolume mounts the volume mounted to the staging path to the target path
func (ns *NodeServer) NodePublishVolume(ctx context.Context, req *csi.NodePublishVolumeRequest) (*csi.NodePublishVolumeResponse, error)
{
klog.Infof("received node publish volume request %+v", protosanitizer.StripSecrets(req))
targetPath := req.GetTargetPath()
isBlock := req.GetVolumeCapability().GetBlock() != nil
// Check that it's not already mounted
_, error := mount.IsNotMountPoint(ns.mounter, targetPath)
if (error != nil)
{
if (os.IsNotExist(error))
{
if (isBlock)
{
pathFile, err := os.OpenFile(targetPath, os.O_CREATE|os.O_RDWR, 0o600)
if (err != nil)
{
klog.Errorf("failed to create block device mount target %s with error: %v", targetPath, err)
return nil, status.Error(codes.Internal, err.Error())
}
err = pathFile.Close()
if (err != nil)
{
klog.Errorf("failed to close %s with error: %v", targetPath, err)
return nil, status.Error(codes.Internal, err.Error())
}
}
else
{
err := os.MkdirAll(targetPath, 0777)
if (err != nil)
{
klog.Errorf("failed to create fs mount target %s with error: %v", targetPath, err)
return nil, status.Error(codes.Internal, err.Error())
}
}
}
else
{
return nil, status.Error(codes.Internal, error.Error())
}
}
ctxVars := make(map[string]string)
err := json.Unmarshal([]byte(req.VolumeId), &ctxVars)
if (err != nil)
{
return nil, status.Error(codes.Internal, "volume ID not in JSON format")
}
volName := ctxVars["name"]
_, etcdUrl, etcdPrefix := GetConnectionParams(ctxVars)
if (len(etcdUrl) == 0)
{
return nil, status.Error(codes.InvalidArgument, "no etcdUrl in storage class configuration and no etcd_address in vitastor.conf")
}
// Map NBD device
// FIXME: Check if already mapped
args := []string{
"map", "--etcd_address", strings.Join(etcdUrl, ","),
"--etcd_prefix", etcdPrefix,
"--image", volName,
};
if (ctxVars["configPath"] != "")
{
args = append(args, "--config_path", ctxVars["configPath"])
}
if (req.GetReadonly())
{
args = append(args, "--readonly", "1")
}
c := exec.Command("/usr/bin/vitastor-nbd", args...)
var stdout, stderr bytes.Buffer
c.Stdout, c.Stderr = &stdout, &stderr
err = c.Run()
stdoutStr, stderrStr := string(stdout.Bytes()), string(stderr.Bytes())
if (err != nil)
{
klog.Errorf("vitastor-nbd map failed: %s, status %s\n", stdoutStr+stderrStr, err)
return nil, status.Error(codes.Internal, stdoutStr+stderrStr+" (status "+err.Error()+")")
}
devicePath := strings.TrimSpace(stdoutStr)
// Check existing format
diskMounter := &mount.SafeFormatAndMount{Interface: ns.mounter, Exec: utilexec.New()}
existingFormat, err := diskMounter.GetDiskFormat(devicePath)
if (err != nil)
{
klog.Errorf("failed to get disk format for path %s, error: %v", err)
// unmap NBD device
unmapOut, unmapErr := exec.Command("/usr/bin/vitastor-nbd", "unmap", devicePath).CombinedOutput()
if (unmapErr != nil)
{
klog.Errorf("failed to unmap NBD device %s: %s, error: %v", devicePath, unmapOut, unmapErr)
}
return nil, err
}
// Format the device (ext4 or xfs)
fsType := req.GetVolumeCapability().GetMount().GetFsType()
opt := req.GetVolumeCapability().GetMount().GetMountFlags()
opt = append(opt, "_netdev")
if ((req.VolumeCapability.AccessMode.Mode == csi.VolumeCapability_AccessMode_MULTI_NODE_READER_ONLY ||
req.VolumeCapability.AccessMode.Mode == csi.VolumeCapability_AccessMode_SINGLE_NODE_READER_ONLY) &&
!Contains(opt, "ro"))
{
opt = append(opt, "ro")
}
if (fsType == "xfs")
{
opt = append(opt, "nouuid")
}
readOnly := Contains(opt, "ro")
if (existingFormat == "" && !readOnly)
{
args := []string{}
switch fsType
{
case "ext4":
args = []string{"-m0", "-Enodiscard,lazy_itable_init=1,lazy_journal_init=1", devicePath}
case "xfs":
args = []string{"-K", devicePath}
}
if (len(args) > 0)
{
cmdOut, cmdErr := diskMounter.Exec.Command("mkfs."+fsType, args...).CombinedOutput()
if (cmdErr != nil)
{
klog.Errorf("failed to run mkfs error: %v, output: %v", cmdErr, string(cmdOut))
// unmap NBD device
unmapOut, unmapErr := exec.Command("/usr/bin/vitastor-nbd", "unmap", devicePath).CombinedOutput()
if (unmapErr != nil)
{
klog.Errorf("failed to unmap NBD device %s: %s, error: %v", devicePath, unmapOut, unmapErr)
}
return nil, status.Error(codes.Internal, cmdErr.Error())
}
}
}
if (isBlock)
{
opt = append(opt, "bind")
err = diskMounter.Mount(devicePath, targetPath, fsType, opt)
}
else
{
err = diskMounter.FormatAndMount(devicePath, targetPath, fsType, opt)
}
if (err != nil)
{
klog.Errorf(
"failed to mount device path (%s) to path (%s) for volume (%s) error: %s",
devicePath, targetPath, volName, err,
)
// unmap NBD device
unmapOut, unmapErr := exec.Command("/usr/bin/vitastor-nbd", "unmap", devicePath).CombinedOutput()
if (unmapErr != nil)
{
klog.Errorf("failed to unmap NBD device %s: %s, error: %v", devicePath, unmapOut, unmapErr)
}
return nil, status.Error(codes.Internal, err.Error())
}
return &csi.NodePublishVolumeResponse{}, nil
}
// NodeUnpublishVolume unmounts the volume from the target path
func (ns *NodeServer) NodeUnpublishVolume(ctx context.Context, req *csi.NodeUnpublishVolumeRequest) (*csi.NodeUnpublishVolumeResponse, error)
{
klog.Infof("received node unpublish volume request %+v", protosanitizer.StripSecrets(req))
targetPath := req.GetTargetPath()
devicePath, refCount, err := mount.GetDeviceNameFromMount(ns.mounter, targetPath)
if (err != nil)
{
if (os.IsNotExist(err))
{
return nil, status.Error(codes.NotFound, "Target path not found")
}
return nil, status.Error(codes.Internal, err.Error())
}
if (devicePath == "")
{
return nil, status.Error(codes.NotFound, "Volume not mounted")
}
// unmount
err = mount.CleanupMountPoint(targetPath, ns.mounter, false)
if (err != nil)
{
return nil, status.Error(codes.Internal, err.Error())
}
// unmap NBD device
if (refCount == 1)
{
unmapOut, unmapErr := exec.Command("/usr/bin/vitastor-nbd", "unmap", devicePath).CombinedOutput()
if (unmapErr != nil)
{
klog.Errorf("failed to unmap NBD device %s: %s, error: %v", devicePath, unmapOut, unmapErr)
}
}
return &csi.NodeUnpublishVolumeResponse{}, nil
}
// NodeGetVolumeStats returns volume capacity statistics available for the volume
func (ns *NodeServer) NodeGetVolumeStats(ctx context.Context, req *csi.NodeGetVolumeStatsRequest) (*csi.NodeGetVolumeStatsResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// NodeExpandVolume expanding the file system on the node
func (ns *NodeServer) NodeExpandVolume(ctx context.Context, req *csi.NodeExpandVolumeRequest) (*csi.NodeExpandVolumeResponse, error)
{
return nil, status.Error(codes.Unimplemented, "")
}
// NodeGetCapabilities returns the supported capabilities of the node server
func (ns *NodeServer) NodeGetCapabilities(ctx context.Context, req *csi.NodeGetCapabilitiesRequest) (*csi.NodeGetCapabilitiesResponse, error)
{
return &csi.NodeGetCapabilitiesResponse{}, nil
}
// NodeGetInfo returns NodeGetInfoResponse for CO.
func (ns *NodeServer) NodeGetInfo(ctx context.Context, req *csi.NodeGetInfoRequest) (*csi.NodeGetInfoResponse, error)
{
klog.Infof("received node get info request %+v", protosanitizer.StripSecrets(req))
return &csi.NodeGetInfoResponse{
NodeId: ns.NodeID,
}, nil
}

36
csi/src/server.go Normal file
View File

@ -0,0 +1,36 @@
// Copyright (c) Vitaliy Filippov, 2019+
// License: VNPL-1.1 or GNU GPL-2.0+ (see README.md for details)
package vitastor
import (
"k8s.io/klog"
)
type Driver struct
{
*Config
}
// NewDriver create new instance driver
func NewDriver(config *Config) (*Driver, error)
{
if (config == nil)
{
klog.Errorf("Vitastor CSI driver initialization failed")
return nil, nil
}
driver := &Driver{
Config: config,
}
klog.Infof("Vitastor CSI driver initialized")
return driver, nil
}
// Start server
func (driver *Driver) Run()
{
server := NewNonBlockingGRPCServer()
server.Start(driver.Endpoint, NewIdentityServer(driver), NewControllerServer(driver), NewNodeServer(driver))
server.Wait()
}

39
csi/vitastor-csi.go Normal file
View File

@ -0,0 +1,39 @@
// Copyright (c) Vitaliy Filippov, 2019+
// License: VNPL-1.1 or GNU GPL-2.0+ (see README.md for details)
package main
import (
"flag"
"fmt"
"os"
"k8s.io/klog"
"vitastor.io/csi/src"
)
func main()
{
var config = vitastor.NewConfig()
flag.StringVar(&config.Endpoint, "endpoint", "", "CSI endpoint")
flag.StringVar(&config.NodeID, "node", "", "Node ID")
flag.Parse()
if (config.Endpoint == "")
{
config.Endpoint = os.Getenv("CSI_ENDPOINT")
}
if (config.NodeID == "")
{
config.NodeID = os.Getenv("NODE_ID")
}
if (config.Endpoint == "" && config.NodeID == "")
{
fmt.Fprintf(os.Stderr, "Please set -endpoint and -node / CSI_ENDPOINT & NODE_ID env vars\n")
os.Exit(1)
}
drv, err := vitastor.NewDriver(config)
if (err != nil)
{
klog.Fatalln(err)
}
drv.Run()
}

7
debian/build-vitastor-bullseye.sh vendored Executable file
View File

@ -0,0 +1,7 @@
#!/bin/bash
cat < vitastor.Dockerfile > ../Dockerfile
cd ..
mkdir -p packages
sudo podman build --build-arg REL=bullseye -v `pwd`/packages:/root/packages -f Dockerfile .
rm Dockerfile

7
debian/build-vitastor-buster.sh vendored Executable file
View File

@ -0,0 +1,7 @@
#!/bin/bash
cat < vitastor.Dockerfile > ../Dockerfile
cd ..
mkdir -p packages
sudo podman build --build-arg REL=buster -v `pwd`/packages:/root/packages -f Dockerfile .
rm Dockerfile

27
debian/changelog vendored Normal file
View File

@ -0,0 +1,27 @@
vitastor (0.6.17-1) unstable; urgency=medium
* RDMA support
* Bugfixes
-- Vitaliy Filippov <vitalif@yourcmc.ru> Sat, 01 May 2021 18:46:10 +0300
vitastor (0.6.0-1) unstable; urgency=medium
* Snapshots and Copy-on-Write clones
* Image metadata in etcd (name, size)
* Image I/O and space statistics in etcd
* Write throttling for smoothing random write workloads in SSD+HDD configurations
-- Vitaliy Filippov <vitalif@yourcmc.ru> Sun, 11 Apr 2021 00:49:18 +0300
vitastor (0.5.1-1) unstable; urgency=medium
* Add jerasure support
-- Vitaliy Filippov <vitalif@yourcmc.ru> Sat, 05 Dec 2020 17:02:26 +0300
vitastor (0.5-1) unstable; urgency=medium
* First packaging for Debian
-- Vitaliy Filippov <vitalif@yourcmc.ru> Thu, 05 Nov 2020 02:20:59 +0300

1
debian/compat vendored Normal file
View File

@ -0,0 +1 @@
13

55
debian/control vendored Normal file
View File

@ -0,0 +1,55 @@
Source: vitastor
Section: admin
Priority: optional
Maintainer: Vitaliy Filippov <vitalif@yourcmc.ru>
Build-Depends: debhelper, liburing-dev (>= 0.6), g++ (>= 8), libstdc++6 (>= 8), linux-libc-dev, libgoogle-perftools-dev, libjerasure-dev, libgf-complete-dev, libibverbs-dev
Standards-Version: 4.5.0
Homepage: https://vitastor.io/
Rules-Requires-Root: no
Package: vitastor
Architecture: amd64
Depends: vitastor-osd, vitastor-mon, vitastor-client, vitastor-client-dev, vitastor-fio
Description: Vitastor, a fast software-defined clustered block storage
Vitastor is a small, simple and fast clustered block storage (storage for VM drives),
architecturally similar to Ceph which means strong consistency, primary-replication,
symmetric clustering and automatic data distribution over any number of drives of any
size with configurable redundancy (replication or erasure codes/XOR).
Package: vitastor-osd
Architecture: amd64
Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version})
Description: Vitastor, a fast software-defined clustered block storage - object storage daemon
Vitastor object storage daemon, i.e. server program that stores data.
Package: vitastor-mon
Architecture: amd64
Depends: ${misc:Depends}, nodejs (>= 10), node-sprintf-js, node-ws (>= 7), lp-solve
Description: Vitastor, a fast software-defined clustered block storage - monitor
Vitastor monitor, i.e. server program responsible for watching cluster state and
scheduling cluster-level operations.
Package: vitastor-client
Architecture: amd64
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: Vitastor, a fast software-defined clustered block storage - client
Vitastor client library and command-line interface.
Package: vitastor-client-dev
Section: devel
Architecture: amd64
Depends: ${misc:Depends}, vitastor-client (= ${binary:Version})
Description: Vitastor, a fast software-defined clustered block storage - development files
Vitastor library headers for development.
Package: vitastor-fio
Architecture: amd64
Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version}), fio (= ${dep:fio})
Description: Vitastor, a fast software-defined clustered block storage - fio drivers
Vitastor fio drivers for benchmarking.
Package: pve-storage-vitastor
Architecture: amd64
Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version})
Description: Vitastor Proxmox Virtual Environment storage plugin
Vitastor storage plugin for Proxmox Virtual Environment.

21
debian/copyright vendored Normal file
View File

@ -0,0 +1,21 @@
Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
Upstream-Name: vitastor
Upstream-Contact: Vitaliy Filippov <vitalif@yourcmc.ru>
Source: https://vitastor.io
Files: *
Copyright: 2019+ Vitaliy Filippov <vitalif@yourcmc.ru>
License: Multiple licenses VNPL-1.1 and/or GPL-2.0+
All server-side code (OSD, Monitor and so on) is licensed under the terms of
Vitastor Network Public License 1.1 (VNPL 1.1), a copyleft license based on
GNU GPLv3.0 with the additional "Network Interaction" clause which requires
opensourcing all programs directly or indirectly interacting with Vitastor
through a computer network and expressly designed to be used in conjunction
with it ("Proxy Programs"). Proxy Programs may be made public not only under
the terms of the same license, but also under the terms of any GPL-Compatible
Free Software License, as listed by the Free Software Foundation.
This is a stricter copyleft license than the Affero GPL.
.
Client libraries (cluster_client and so on) are dual-licensed under the same
VNPL 1.1 and also GNU GPL 2.0 or later to allow for compatibility with GPLed
software like QEMU and fio.

1
debian/fio_version vendored Normal file
View File

@ -0,0 +1 @@
dep:fio=3.16-1

4
debian/install vendored Normal file
View File

@ -0,0 +1,4 @@
VNPL-1.1.txt usr/share/doc/vitastor
GPL-2.0.txt usr/share/doc/vitastor
README.md usr/share/doc/vitastor
README-ru.md usr/share/doc/vitastor

40
debian/libvirt.Dockerfile vendored Normal file
View File

@ -0,0 +1,40 @@
# Build patched libvirt for Debian Buster or Bullseye/Sid inside a container
# cd ..; podman build --build-arg REL=bullseye -v `pwd`/packages:/root/packages -f debian/libvirt.Dockerfile .
ARG REL=
FROM debian:$REL
ARG REL=
WORKDIR /root
RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
echo "deb http://deb.debian.org/debian $REL-backports main" >> /etc/apt/sources.list; \
echo >> /etc/apt/preferences; \
echo 'Package: *' >> /etc/apt/preferences; \
echo "Pin: release a=$REL-backports" >> /etc/apt/preferences; \
echo 'Pin-Priority: 500' >> /etc/apt/preferences; \
fi; \
grep '^deb ' /etc/apt/sources.list | perl -pe 's/^deb/deb-src/' >> /etc/apt/sources.list; \
echo 'APT::Install-Recommends false;' >> /etc/apt/apt.conf; \
echo 'APT::Install-Suggests false;' >> /etc/apt/apt.conf
RUN apt-get update; apt-get -y install devscripts
RUN apt-get -y build-dep libvirt0
RUN apt-get -y install libglusterfs-dev
RUN apt-get --download-only source libvirt
ADD patches/libvirt-5.0-vitastor.diff patches/libvirt-7.0-vitastor.diff patches/libvirt-7.5-vitastor.diff patches/libvirt-7.6-vitastor.diff /root
RUN set -e; \
mkdir -p /root/packages/libvirt-$REL; \
rm -rf /root/packages/libvirt-$REL/*; \
cd /root/packages/libvirt-$REL; \
dpkg-source -x /root/libvirt*.dsc; \
D=$(ls -d libvirt-*/); \
V=$(ls -d libvirt-*/ | perl -pe 's/libvirt-(\d+\.\d+).*/$1/'); \
cp /root/libvirt-$V-vitastor.diff $D/debian/patches; \
echo libvirt-$V-vitastor.diff >> $D/debian/patches/series; \
cd $D; \
V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)(~bpo[\d\+]*)?(\+deb[u\d]+)?\).*$/$1/')+vitastor2; \
DEBEMAIL="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v $V 'Add Vitastor support'; \
DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \
rm -rf /root/packages/libvirt-$REL/$D

61
debian/patched-qemu.Dockerfile vendored Normal file
View File

@ -0,0 +1,61 @@
# Build patched QEMU for Debian Buster or Bullseye/Sid inside a container
# cd ..; podman build --build-arg REL=bullseye -v `pwd`/packages:/root/packages -f debian/patched-qemu.Dockerfile .
ARG REL=
FROM debian:$REL
ARG REL=
WORKDIR /root
RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
echo "deb http://deb.debian.org/debian $REL-backports main" >> /etc/apt/sources.list; \
echo >> /etc/apt/preferences; \
echo 'Package: *' >> /etc/apt/preferences; \
echo "Pin: release a=$REL-backports" >> /etc/apt/preferences; \
echo 'Pin-Priority: 500' >> /etc/apt/preferences; \
fi; \
grep '^deb ' /etc/apt/sources.list | perl -pe 's/^deb/deb-src/' >> /etc/apt/sources.list; \
echo 'APT::Install-Recommends false;' >> /etc/apt/apt.conf; \
echo 'APT::Install-Suggests false;' >> /etc/apt/apt.conf
RUN apt-get update
RUN apt-get -y install qemu fio liburing1 liburing-dev libgoogle-perftools-dev devscripts
RUN apt-get -y build-dep qemu
# To build a custom version
#RUN cp /root/packages/qemu-orig/* /root
RUN apt-get --download-only source qemu
ADD patches/qemu-5.0-vitastor.patch patches/qemu-5.1-vitastor.patch patches/qemu-6.1-vitastor.patch src/qemu_driver.c /root/vitastor/patches/
RUN set -e; \
apt-get install -y wget; \
wget -q -O /etc/apt/trusted.gpg.d/vitastor.gpg https://vitastor.io/debian/pubkey.gpg; \
(echo deb http://vitastor.io/debian $REL main > /etc/apt/sources.list.d/vitastor.list); \
(echo "APT::Install-Recommends false;" > /etc/apt/apt.conf) && \
apt-get update; \
apt-get install -y vitastor-client vitastor-client-dev quilt; \
mkdir -p /root/packages/qemu-$REL; \
rm -rf /root/packages/qemu-$REL/*; \
cd /root/packages/qemu-$REL; \
dpkg-source -x /root/qemu*.dsc; \
if ls -d /root/packages/qemu-$REL/qemu-5.0*; then \
D=$(ls -d /root/packages/qemu-$REL/qemu-5.0*); \
cp /root/vitastor/patches/qemu-5.0-vitastor.patch $D/debian/patches; \
echo qemu-5.0-vitastor.patch >> $D/debian/patches/series; \
elif ls /root/packages/qemu-$REL/qemu-6.1*; then \
D=$(ls -d /root/packages/qemu-$REL/qemu-6.1*); \
cp /root/vitastor/patches/qemu-6.1-vitastor.patch $D/debian/patches; \
echo qemu-6.1-vitastor.patch >> $D/debian/patches/series; \
else \
cp /root/vitastor/patches/qemu-5.1-vitastor.patch /root/packages/qemu-$REL/qemu-*/debian/patches; \
P=`ls -d /root/packages/qemu-$REL/qemu-*/debian/patches`; \
echo qemu-5.1-vitastor.patch >> $P/series; \
fi; \
cd /root/packages/qemu-$REL/qemu-*/; \
quilt push -a; \
quilt add block/vitastor.c; \
cp /root/vitastor/patches/qemu_driver.c block/vitastor.c; \
quilt refresh; \
V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)(~bpo[\d\+]*)?\).*$/$1/')+vitastor1; \
DEBEMAIL="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v $V 'Plug Vitastor block driver'; \
DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \
rm -rf /root/packages/qemu-$REL/qemu-*/

1
debian/pve-storage-vitastor.install vendored Normal file
View File

@ -0,0 +1 @@
patches/PVE_VitastorPlugin.pm usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm

19
debian/raw.h vendored Normal file
View File

@ -0,0 +1,19 @@
/* Removed in Linux 5.14 */
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef __LINUX_RAW_H
#define __LINUX_RAW_H
#include <linux/types.h>
#define RAW_SETBIND _IO( 0xac, 0 )
#define RAW_GETBIND _IO( 0xac, 1 )
struct raw_config_request
{
int raw_minor;
__u64 block_major;
__u64 block_minor;
};
#endif /* __LINUX_RAW_H */

10
debian/rules vendored Executable file
View File

@ -0,0 +1,10 @@
#!/usr/bin/make -f
export DH_VERBOSE = 1
%:
dh $@
override_dh_installdeb:
cat debian/fio_version >> debian/vitastor-fio.substvars
[ -f debian/qemu_version ] && (cat debian/qemu_version >> debian/vitastor-qemu.substvars) || true
dh_installdeb

1
debian/source/format vendored Normal file
View File

@ -0,0 +1 @@
3.0 (quilt)

2
debian/vitastor-client-dev.install vendored Normal file
View File

@ -0,0 +1,2 @@
usr/include
usr/lib/*/pkgconfig

7
debian/vitastor-client.install vendored Normal file
View File

@ -0,0 +1,7 @@
usr/bin/vita
usr/bin/vitastor-cli
usr/bin/vitastor-rm
usr/bin/vitastor-nbd
usr/bin/vitastor-nfs
usr/lib/*/libvitastor*.so*
mon/make-osd.sh /usr/lib/vitastor

1
debian/vitastor-fio.install vendored Normal file
View File

@ -0,0 +1 @@
usr/lib/*/libfio*.so*

1
debian/vitastor-mon.install vendored Normal file
View File

@ -0,0 +1 @@
mon usr/lib/vitastor

2
debian/vitastor-osd.install vendored Normal file
View File

@ -0,0 +1,2 @@
usr/bin/vitastor-osd
usr/bin/vitastor-dump-journal

55
debian/vitastor.Dockerfile vendored Normal file
View File

@ -0,0 +1,55 @@
# Build Vitastor packages for Debian Buster or Bullseye/Sid inside a container
# cd ..; podman build --build-arg REL=bullseye -v `pwd`/packages:/root/packages -f debian/vitastor.Dockerfile .
ARG REL=
FROM debian:$REL
ARG REL=
WORKDIR /root
RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
echo "deb http://deb.debian.org/debian $REL-backports main" >> /etc/apt/sources.list; \
echo >> /etc/apt/preferences; \
echo 'Package: *' >> /etc/apt/preferences; \
echo "Pin: release a=$REL-backports" >> /etc/apt/preferences; \
echo 'Pin-Priority: 500' >> /etc/apt/preferences; \
fi; \
grep '^deb ' /etc/apt/sources.list | perl -pe 's/^deb/deb-src/' >> /etc/apt/sources.list; \
echo 'APT::Install-Recommends false;' >> /etc/apt/apt.conf; \
echo 'APT::Install-Suggests false;' >> /etc/apt/apt.conf
RUN apt-get update
RUN apt-get -y install fio liburing1 liburing-dev libgoogle-perftools-dev devscripts
RUN apt-get -y build-dep fio
RUN apt-get --download-only source fio
RUN apt-get update && apt-get -y install libjerasure-dev cmake libibverbs-dev
ADD . /root/vitastor
RUN set -e -x; \
mkdir -p /root/fio-build/; \
cd /root/fio-build/; \
rm -rf /root/fio-build/*; \
dpkg-source -x /root/fio*.dsc; \
mkdir -p /root/packages/vitastor-$REL; \
rm -rf /root/packages/vitastor-$REL/*; \
cd /root/packages/vitastor-$REL; \
cp -r /root/vitastor vitastor-0.6.17; \
cd vitastor-0.6.17; \
ln -s /root/fio-build/fio-*/ ./fio; \
FIO=$(head -n1 fio/debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
ls /usr/include/linux/raw.h || cp ./debian/raw.h /usr/include/linux/raw.h; \
sh copy-fio-includes.sh; \
rm fio; \
mkdir -p a b debian/patches; \
mv fio-copy b/fio; \
diff -NaurpbB a b > debian/patches/fio-headers.patch || true; \
echo fio-headers.patch >> debian/patches/series; \
rm -rf a b; \
echo "dep:fio=$FIO" > debian/fio_version; \
cd /root/packages/vitastor-$REL; \
tar --sort=name --mtime='2020-01-01' --owner=0 --group=0 --exclude=debian -cJf vitastor_0.6.17.orig.tar.xz vitastor-0.6.17; \
cd vitastor-0.6.17; \
V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
DEBFULLNAME="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v "$V""$REL" "Rebuild for $REL"; \
DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \
rm -rf /root/packages/vitastor-$REL/vitastor-*/

9
docker/Dockerfile Normal file
View File

@ -0,0 +1,9 @@
# Build Docker image with Vitastor packages
FROM debian:bullseye
ADD vitastor.list /etc/apt/sources.list.d
ADD vitastor.gpg /etc/apt/trusted.gpg.d
ADD vitastor.pref /etc/apt/preferences.d
ADD apt.conf /etc/apt/
RUN apt-get update && apt-get -y install vitastor qemu-system-x86 qemu-system-common && apt-get clean

1
docker/apt.conf Normal file
View File

@ -0,0 +1 @@
APT::Install-Recommends false;

BIN
docker/vitastor.gpg Normal file

Binary file not shown.

1
docker/vitastor.list Normal file
View File

@ -0,0 +1 @@
deb http://vitastor.io/debian bullseye main

3
docker/vitastor.pref Normal file
View File

@ -0,0 +1,3 @@
Package: *
Pin: origin "vitastor.io"
Pin-Priority: 1000

37
docs/config.en.md Normal file
View File

@ -0,0 +1,37 @@
[Documentation](../README.md#documentation) → Configuration Reference
-----
[Читать на русском](config.ru.md)
# Configuration Reference
Vitastor configuration consists of:
- [Configuration parameters (key-value)](#parameter-reference)
- [Pool configuration](config/pool.en.md)
- [OSD placement tree configuration](config/pool.en.md#placement-tree)
- [Separate OSD settings](config/pool.en.md#osd-settings)
- [Inode configuration](config/inode.en.md) i.e. image metadata like name, size and parent reference
Configuration parameters can be set in 3 places:
- Configuration file (`/etc/vitastor/vitastor.conf` or other path)
- etcd key `/vitastor/config/global`. Most variables can be set there, but etcd
connection parameters should obviously be set in the configuration file.
- Command line of Vitastor components: OSD, mon, fio and QEMU options,
OpenStack/Proxmox/etc configuration. The latter doesn't allow to set all
variables directly, but it allows to override the configuration file and
set everything you need inside it.
In the future, additional configuration methods may be added:
- OSD superblock which will, by design, contain parameters related to the disk
layout and to one specific OSD.
- OSD-specific keys in etcd like `/vitastor/config/osd/<number>`.
## Parameter Reference
- [Common](config/common.en.md)
- [Network](config/network.en.md)
- [Global Disk Layout](config/layout-cluster.en.md)
- [OSD Disk Layout](config/layout-osd.en.md)
- [OSD Runtime Parameters](config/osd.en.md)
- [Monitor](config/monitor.en.md)

39
docs/config.ru.md Normal file
View File

@ -0,0 +1,39 @@
[Документация](../README-ru.md#документация) → Конфигурация Vitastor
-----
[Read in English](config.en.md)
# Конфигурация Vitastor
Конфигурация Vitastor состоит из:
- [Параметров (ключ-значение)](#список-параметров)
- [Настроек пулов](config/pool.ru.md)
- [Настроек дерева OSD](config/pool.ru.md#дерево-размещения)
- [Настроек отдельных OSD](config/pool.ru.md#настройки-osd)
- [Настроек инодов](config/inode.ru.md), т.е. метаданных образов, таких, как имя, размер и ссылки на
родительский образ
Параметры конфигурации могут задаваться в 3 местах:
- Файле конфигурации (`/etc/vitastor/vitastor.conf` или по другому пути)
- Ключе в etcd `/vitastor/config/global`. Большая часть параметров может
задаваться там, кроме, естественно, самих параметров соединения с etcd,
которые должны задаваться в файле конфигурации
- В командной строке компонентов Vitastor: OSD, монитора, опциях fio и QEMU,
настроек OpenStack, Proxmox и т.п. Последние, как правило, не включают полный
набор параметров напрямую, но разрешают определить путь к файлу конфигурации
и задать любые параметры в нём.
В будущем также могут быть добавлены другие способы конфигурации:
- Суперблок OSD, в котором будут храниться параметры OSD, связанные с дисковым
форматом и с этим конкретным OSD.
- OSD-специфичные ключи в etcd типа `/vitastor/config/osd/<номер>`.
## Список параметров
- [Общие](config/common.ru.md)
- [Сеть](config/network.ru.md)
- [Глобальные дисковые параметры](config/layout-cluster.ru.md)
- [Дисковые параметры OSD](config/layout-osd.ru.md)
- [Прочие параметры OSD](config/osd.ru.md)
- [Параметры мониторов](config/monitor.ru.md)

46
docs/config/common.en.md Normal file
View File

@ -0,0 +1,46 @@
[Documentation](../../README.md#documentation) → [Configuration](../config.en.md) → Common Parameters
-----
[Читать на русском](common.ru.md)
# Common Parameters
These are the most common parameters which apply to all components of Vitastor.
- [config_path](#config_path)
- [etcd_address](#etcd_address)
- [etcd_prefix](#etcd_prefix)
- [log_level](#log_level)
## config_path
- Type: string
- Default: /etc/vitastor/vitastor.conf
Path to the JSON configuration file. Configuration file is optional,
a non-existing configuration file does not prevent Vitastor from
running if required parameters are specified.
## etcd_address
- Type: string or array of strings
etcd connection endpoint(s). Multiple endpoints may be delimited by "," or
specified in a JSON array `["10.0.115.10:2379/v3","10.0.115.11:2379/v3"]`.
Note that https is not supported for etcd connections yet.
## etcd_prefix
- Type: string
- Default: /vitastor
Prefix for all keys in etcd used by Vitastor. You can change prefix and, for
example, use a single etcd cluster for multiple Vitastor clusters.
## log_level
- Type: integer
- Default: 0
Log level. Raise if you want more verbose output.

45
docs/config/common.ru.md Normal file
View File

@ -0,0 +1,45 @@
[Документация](../../README-ru.md#документация) → [Конфигурация](../config.ru.md) → Общие параметры
-----
[Read in English](common.en.md)
# Общие параметры
Это наиболее общие параметры, используемые всеми компонентами Vitastor.
- [config_path](#config_path)
- [etcd_address](#etcd_address)
- [etcd_prefix](#etcd_prefix)
- [log_level](#log_level)
## config_path
- Тип: строка
- Значение по умолчанию: /etc/vitastor/vitastor.conf
Путь к файлу конфигурации в формате JSON. Файл конфигурации необязателен,
без него Vitastor тоже будет работать, если переданы необходимые параметры.
## etcd_address
- Тип: строка или массив строк
Адрес(а) подключения к etcd. Несколько адресов могут разделяться запятой
или указываться в виде JSON-массива `["10.0.115.10:2379/v3","10.0.115.11:2379/v3"]`.
## etcd_prefix
- Тип: строка
- Значение по умолчанию: /vitastor
Префикс для ключей etcd, которые использует Vitastor. Вы можете задать другой
префикс, например, чтобы запустить несколько кластеров Vitastor с одним
кластером etcd.
## log_level
- Тип: целое число
- Значение по умолчанию: 0
Уровень логгирования. Повысьте, если хотите более подробный вывод.

32
docs/config/inode.en.md Normal file
View File

@ -0,0 +1,32 @@
[Documentation](../../README.md#documentation) → [Configuration](../config.en.md) → Image metadata in etcd
-----
[Читать на русском](inode.ru.md)
# Image metadata in etcd
Image list is stored in etcd in `/vitastor/config/inode/<pool>/<inode>` keys.
You can even create images manually:
```
etcdctl --endpoints=<etcd> put /vitastor/config/inode/<pool>/<inode> '{"name":"<name>","size":<size>[,"parent_id":<parent_inode_number>][,"readonly":true]}'
```
For example:
```
etcdctl --endpoints=http://10.115.0.10:2379/v3 put /vitastor/config/inode/1/1 '{"name":"testimg","size":2147483648}'
```
If you specify parent_id the image becomes a CoW clone. I.e. all writes go to the new inode and reads first check it
and then upper layers. You can then make parent readonly by updating its entry with `"readonly":true` for safety and
basically treat it as a snapshot.
So to create a snapshot you basically rename the previous upper layer (for example from testimg to testimg@0), make it readonly
and create a new top layer with the original name (testimg) and the previous one as a parent.
vitastor-cli, K8s, OpenStack and other drivers also store the reverse mapping in `/vitastor/index/image/<name>` keys
in JSON format: `{"id":<inode>,"pool_id":<pool>}` and ID counters in `/vitastor/index/maxid/<pool>` as numbers
to simplify ID generation.

34
docs/config/inode.ru.md Normal file
View File

@ -0,0 +1,34 @@
[Документация](../../README-ru.md#документация) → [Конфигурация](../config.ru.md) → Метаданные образов в etcd
-----
[Read in English](inode.en.md)
# Метаданные образов в etcd
Список образов хранится в etcd в ключах `/vitastor/config/inode/<pool>/<inode>`.
Вы можете даже создавать образы вручную:
```
etcdctl --endpoints=<etcd> put /vitastor/config/inode/<pool>/<inode> '{"name":"<name>","size":<size>[,"parent_id":<parent_inode_number>][,"readonly":true]}'
```
Например:
```
etcdctl --endpoints=http://10.115.0.10:2379/v3 put /vitastor/config/inode/1/1 '{"name":"testimg","size":2147483648}'
```
Если вы зададите parent_id, то образ станет CoW-клоном, т.е. все новые запросы записи пойдут в новый инод, а запросы
чтения будут проверять сначала его, а потом родительские слои по цепочке вверх. Чтобы случайно не перезаписать данные
в родительском слое, вы можете переключить его в режим "только чтение", добавив флаг `"readonly":true` в его запись
метаданных. В таком случае родительский образ становится просто снапшотом.
Таким образом, для создания снапшота вам нужно просто переименовать предыдущий inode (например, из testimg в testimg@0),
сделать его readonly и создать новый слой с исходным именем образа (testimg), ссылающийся на только что переименованный
в качестве родительского.
vitastor-cli и драйвера K8s, OpenStack и т.п. также хранят обратный маппинг в ключах `/vitastor/index/image/<name>`
в JSON-формате: `{"id":<inode>,"pool_id":<pool>}` и счётчики ID `/vitastor/index/maxid/<pool>` в виде просто чисел
для упрощения генерации ID новых образов.

View File

@ -0,0 +1,124 @@
[Documentation](../../README.md#documentation) → [Configuration](../config.en.md) → Cluster-Wide Disk Layout Parameters
-----
[Читать на русском](layout-cluster.ru.md)
# Cluster-Wide Disk Layout Parameters
These parameters apply to clients and OSDs, are fixed at the moment of OSD drive
initialization and can't be changed after it without losing data.
- [block_size](#block_size)
- [bitmap_granularity](#bitmap_granularity)
- [immediate_commit](#immediate_commit)
- [client_dirty_limit](#client_dirty_limit)
## block_size
- Type: integer
- Default: 131072
Size of objects (data blocks) into which all physical and virtual drives are
subdivided in Vitastor. One of current main settings in Vitastor, affects
memory usage, write amplification and I/O load distribution effectiveness.
Recommended default block size is 128 KB for SSD and 4 MB for HDD. In fact,
it's possible to use 4 MB for SSD too - it will lower memory usage, but
may increase average WA and reduce linear performance.
OSDs with different block sizes (for example, SSD and SSD+HDD OSDs) can
currently coexist in one etcd instance only within separate Vitastor
clusters with different etcd_prefix'es.
Also block size can't be changed after OSD initialization without losing
data.
You must always specify block_size in etcd in /vitastor/config/global if
you change it so all clients can know about it.
OSD memory usage is roughly (SIZE / BLOCK * 68 bytes) which is roughly
544 MB per 1 TB of used disk space with the default 128 KB block size.
## bitmap_granularity
- Type: integer
- Default: 4096
Required virtual disk write alignment ("sector size"). Must be a multiple
of disk_alignment. It's called bitmap granularity because Vitastor tracks
an allocation bitmap for each object containing 2 bits per each
(bitmap_granularity) bytes.
This parameter can't be changed after OSD initialization without losing
data. Also it's fixed for the whole Vitastor cluster i.e. two different
values can't be used in a single Vitastor cluster.
Clients MUST be aware of this parameter value, so put it into etcd key
/vitastor/config/global if you change it for any reason.
## immediate_commit
- Type: string
- Default: false
Another parameter which is really important for performance.
Desktop SSDs are very fast (100000+ iops) for simple random writes
without cache flush. However, they are really slow (only around 1000 iops)
if you try to fsync() each write, that is, when you want to guarantee that
each change gets immediately persisted to the physical media.
Server-grade SSDs with "Advanced/Enhanced Power Loss Protection" or with
"Supercapacitor-based Power Loss Protection", on the other hand, are equally
fast with and without fsync because their cache is protected from sudden
power loss by a built-in supercapacitor-based "UPS".
Some software-defined storage systems always fsync each write and thus are
really slow when used with desktop SSDs. Vitastor, however, can also
efficiently utilize desktop SSDs by postponing fsync until the client calls
it explicitly.
This is what this parameter regulates. When it's set to "all" the whole
Vitastor cluster commits each change to disks immediately and clients just
ignore fsyncs because they know for sure that they're unneeded. This reduces
the amount of network roundtrips performed by clients and improves
performance. So it's always better to use server grade SSDs with
supercapacitors even with Vitastor, especially given that they cost only
a bit more than desktop models.
There is also a common SATA SSD (and HDD too!) firmware bug (or feature)
that makes server SSDs which have supercapacitors slow with fsync. To check
if your SSDs are affected, compare benchmark results from `fio -name=test
-ioengine=libaio -direct=1 -bs=4k -rw=randwrite -iodepth=1` with and without
`-fsync=1`. Results should be the same. If fsync=1 result is worse you can
try to work around this bug by "disabling" drive write-back cache by running
`hdparm -W 0 /dev/sdXX` or `echo write through > /sys/block/sdXX/device/scsi_disk/*/cache_type`
(IMPORTANT: don't mistake it with `/sys/block/sdXX/queue/write_cache` - it's
unsafe to change by hand). The same may apply to newer HDDs with internal
SSD cache or "media-cache" - for example, a lot of Seagate EXOS drives have
it (they have internal SSD cache even though it's not stated in datasheets).
This parameter must be set both in etcd in /vitastor/config/global and in
OSD command line or configuration. Setting it to "all" or "small" requires
enabling disable_journal_fsync and disable_meta_fsync, setting it to "all"
also requires enabling disable_data_fsync.
TLDR: For optimal performance, set immediate_commit to "all" if you only use
SSDs with supercapacitor-based power loss protection (nonvolatile
write-through cache) for both data and journals in the whole Vitastor
cluster. Set it to "small" if you only use such SSDs for journals. Leave
empty if your drives have write-back cache.
## client_dirty_limit
- Type: integer
- Default: 33554432
Without immediate_commit=all this parameter sets the limit of "dirty"
(not committed by fsync) data allowed by the client before forcing an
additional fsync and committing the data. Also note that the client always
holds a copy of uncommitted data in memory so this setting also affects
RAM usage of clients.
This parameter doesn't affect OSDs themselves.

View File

@ -0,0 +1,134 @@
[Документация](../../README-ru.md#документация) → [Конфигурация](../config.ru.md) → Дисковые параметры уровня кластера
-----
[Read in English](layout-cluster.en.md)
# Дисковые параметры уровня кластера
Данные параметры используются клиентами и OSD, задаются в момент инициализации
диска OSD и не могут быть изменены после этого без потери данных.
- [block_size](#block_size)
- [bitmap_granularity](#bitmap_granularity)
- [immediate_commit](#immediate_commit)
- [client_dirty_limit](#client_dirty_limit)
## block_size
- Тип: целое число
- Значение по умолчанию: 131072
Размер объектов (блоков данных), на которые делятся физические и виртуальные
диски в Vitastor. Одна из ключевых на данный момент настроек, влияет на
потребление памяти, объём избыточной записи (write amplification) и
эффективность распределения нагрузки по OSD.
Рекомендуемые по умолчанию размеры блока - 128 килобайт для SSD и 4
мегабайта для HDD. В принципе, для SSD можно тоже использовать 4 мегабайта,
это понизит использование памяти, но ухудшит распределение нагрузки и в
среднем увеличит WA.
OSD с разными размерами блока (например, SSD и SSD+HDD OSD) на данный
момент могут сосуществовать в рамках одного etcd только в виде двух независимых
кластеров Vitastor с разными etcd_prefix.
Также размер блока нельзя менять после инициализации OSD без потери данных.
Если вы меняете размер блока, обязательно прописывайте его в etcd в
/vitastor/config/global, дабы все клиенты его знали.
Потребление памяти OSD составляет примерно (РАЗМЕР / БЛОК * 68 байт),
т.е. примерно 544 МБ памяти на 1 ТБ занятого места на диске при
стандартном 128 КБ блоке.
## bitmap_granularity
- Тип: целое число
- Значение по умолчанию: 4096
Требуемое выравнивание записи на виртуальные диски (размер их "сектора").
Должен быть кратен disk_alignment. Называется гранулярностью битовой карты
потому, что Vitastor хранит битовую карту для каждого объекта, содержащую
по 2 бита на каждые (bitmap_granularity) байт.
Данный параметр нельзя менять после инициализации OSD без потери данных.
Также он фиксирован для всего кластера Vitastor, т.е. разные значения
не могут сосуществовать в одном кластере.
Клиенты ДОЛЖНЫ знать правильное значение этого параметра, так что если вы
его меняете, обязательно прописывайте изменённое значение в etcd в ключ
/vitastor/config/global.
## immediate_commit
- Тип: строка
- Значение по умолчанию: false
Ещё один важный для производительности параметр.
Модели SSD для настольных компьютеров очень быстрые (100000+ операций в
секунду) при простой случайной записи без сбросов кэша. Однако они очень
медленные (всего порядка 1000 iops), если вы пытаетесь сбрасывать кэш после
каждой записи, то есть, если вы пытаетесь гарантировать, что каждое
изменение физически записывается в энергонезависимую память.
С другой стороны, серверные SSD с конденсаторами - функцией, называемой
"Advanced/Enhanced Power Loss Protection" или просто "Supercapacitor-based
Power Loss Protection" - одинаково быстрые и со сбросом кэша, и без
него, потому что их кэш защищён от потери питания встроенным "источником
бесперебойного питания" на основе суперконденсаторов и на самом деле они
его никогда не сбрасывают.
Некоторые программные СХД всегда сбрасывают кэши дисков при каждой записи
и поэтому работают очень медленно с настольными SSD. Vitastor, однако, может
откладывать fsync до явного его вызова со стороны клиента и таким образом
эффективно утилизировать настольные SSD.
Данный параметр влияет как раз на это. Когда он установлен в значение "all",
весь кластер Vitastor мгновенно фиксирует каждое изменение на физические
носители и клиенты могут просто игнорировать запросы fsync, т.к. они точно
знают, что fsync-и не нужны. Это уменьшает число необходимых обращений к OSD
по сети и улучшает производительность. Поэтому даже с Vitastor лучше всегда
использовать только серверные модели SSD с суперконденсаторами, особенно
учитывая то, что стоят они ненамного дороже настольных.
Также в прошивках SATA SSD (и даже HDD!) очень часто встречается либо баг,
либо просто особенность логики, из-за которой серверные SSD, имеющие
конденсаторы и защиту от потери питания, всё равно медленно работают с
fsync. Чтобы понять, подвержены ли этой проблеме ваши SSD, сравните
результаты тестов `fio -name=test -ioengine=libaio -direct=1 -bs=4k
-rw=randwrite -iodepth=1` без и с опцией `-fsync=1`. Результаты должны
быть одинаковые. Если результат с `fsync=1` хуже, вы можете попробовать
обойти проблему, "отключив" кэш записи диска командой `hdparm -W 0 /dev/sdXX`
либо `echo write through > /sys/block/sdXX/device/scsi_disk/*/cache_type`
(ВАЖНО: не перепутайте с `/sys/block/sdXX/queue/write_cache` - этот параметр
менять руками небезопасно). Такая же проблема может встречаться и в новых
HDD-дисках с внутренним SSD или "медиа" кэшем - например, она встречается во
многих дисках Seagate EXOS (у них есть внутренний SSD-кэш, хотя это и не
указано в спецификациях).
Данный параметр нужно указывать и в etcd в /vitastor/config/global, и в
командной строке или конфигурации OSD. Значения "all" и "small" требуют
включения disable_journal_fsync и disable_meta_fsync, значение "all" также
требует включения disable_data_fsync.
Итого, вкратце: для оптимальной производительности установите
immediate_commit в значение "all", если вы используете в кластере только SSD
с суперконденсаторами и для данных, и для журналов. Если вы используете
такие SSD для всех журналов, но не для данных - можете установить параметр
в "small". Если и какие-то из дисков журналов имеют волатильный кэш записи -
оставьте параметр пустым.
## client_dirty_limit
- Тип: целое число
- Значение по умолчанию: 33554432
При работе без immediate_commit=all - это лимит объёма "грязных" (не
зафиксированных fsync-ом) данных, при достижении которого клиент будет
принудительно вызывать fsync и фиксировать данные. Также стоит иметь в виду,
что в этом случае до момента fsync клиент хранит копию незафиксированных
данных в памяти, то есть, настройка влияет на потребление памяти клиентами.
Параметр не влияет на сами OSD.

View File

@ -0,0 +1,176 @@
[Documentation](../../README.md#documentation) → [Configuration](../config.en.md) → OSD Disk Layout Parameters
-----
[Читать на русском](layout-osd.ru.md)
# OSD Disk Layout Parameters
These parameters apply to OSDs, are fixed at the moment of OSD drive
initialization and can't be changed after it without losing data.
- [data_device](#data_device)
- [meta_device](#meta_device)
- [journal_device](#journal_device)
- [journal_offset](#journal_offset)
- [journal_size](#journal_size)
- [meta_offset](#meta_offset)
- [data_offset](#data_offset)
- [data_size](#data_size)
- [meta_block_size](#meta_block_size)
- [journal_block_size](#journal_block_size)
- [disable_data_fsync](#disable_data_fsync)
- [disable_meta_fsync](#disable_meta_fsync)
- [disable_journal_fsync](#disable_journal_fsync)
- [disable_device_lock](#disable_device_lock)
- [disk_alignment](#disk_alignment)
## data_device
- Type: string
Path to the block device to use for data. It's highly recommendded to use
stable paths for all device names: `/dev/disk/by-partuuid/xxx...` instead
of just `/dev/sda` or `/dev/nvme0n1` to not mess up after server restart.
Files can also be used instead of block devices, but this is implemented
only for testing purposes and not for production.
## meta_device
- Type: string
Path to the block device to use for the metadata. Metadata must be on a fast
SSD or performance will suffer. If this option is skipped, `data_device` is
used for the metadata.
## journal_device
- Type: string
Path to the block device to use for the journal. Journal must be on a fast
SSD or performance will suffer. If this option is skipped, `meta_device` is
used for the journal, and if it's also empty, journal is put on
`data_device`. It's almost always fine to put metadata and journal on the
same device, in this case you only need to set `meta_device`.
## journal_offset
- Type: integer
- Default: 0
Offset on the device in bytes where the journal is stored.
## journal_size
- Type: integer
Journal size in bytes. By default, all available space between journal_offset
and data_offset, meta_offset or the end of the journal device is used.
Large journals aren't needed in SSD-only setups, 32 MB is always enough.
In SSD+HDD setups it is beneficial to use larger journals (for example, 1 GB)
and enable [throttle_small_writes](osd.en.md#throttle_small_writes).
## meta_offset
- Type: integer
- Default: 0
Offset on the device in bytes where the metadata area is stored.
Again, set it to something if you colocate metadata with journal or data.
## data_offset
- Type: integer
- Default: 0
Offset on the device in bytes where the data area is stored.
Again, set it to something if you colocate data with journal or metadata.
## data_size
- Type: integer
Data area size in bytes. By default, the whole data device up to the end
will be used for the data area, but you can restrict it if you want to use
a smaller part. Note that there is no option to set metadata area size -
it's derived from the data area size.
## meta_block_size
- Type: integer
- Default: 4096
Physical block size of the metadata device. 4096 for most current
HDDs and SSDs.
## journal_block_size
- Type: integer
- Default: 4096
Physical block size of the journal device. Must be a multiple of
`disk_alignment`. 4096 for most current HDDs and SSDs.
## disable_data_fsync
- Type: boolean
- Default: false
Do not issue fsyncs to the data device, i.e. do not flush its cache.
Safe ONLY if your data device has write-through cache. If you disable
the cache yourself using `hdparm` or `scsi_disk/cache_type` then make sure
that the cache disable command is run every time before starting Vitastor
OSD, for example, in the systemd unit. See also `immediate_commit` option
for the instructions to disable cache and how to benefit from it.
## disable_meta_fsync
- Type: boolean
- Default: false
Same as disable_data_fsync, but for the metadata device. If the metadata
device is not set or if the data device is used for the metadata the option
is ignored and disable_data_fsync value is used instead of it.
## disable_journal_fsync
- Type: boolean
- Default: false
Same as disable_data_fsync, but for the journal device. If the journal
device is not set or if the metadata device is used for the journal the
option is ignored and disable_meta_fsync value is used instead of it. If
the same device is used for data, metadata and journal the option is also
ignored and disable_data_fsync value is used instead of it.
## disable_device_lock
- Type: boolean
- Default: false
Do not lock data, metadata and journal block devices exclusively with
flock(). Though it's not recommended, but you can use it you want to run
multiple OSD with a single device and different offsets, without using
partitions.
## disk_alignment
- Type: integer
- Default: 4096
Required physical disk write alignment. Most current SSD and HDD drives
use 4 KB physical sectors even if they report 512 byte logical sector
size, so 4 KB is a good default setting.
Note, however, that physical sector size also affects WA, because with block
devices it's impossible to write anything smaller than a block. So, when
Vitastor has to write a single metadata entry that's only about 32 bytes in
size, it actually has to write the whole 4 KB sector.
Because of this it can actually be beneficial to use SSDs which work well
with 512 byte sectors and use 512 byte disk_alignment, journal_block_size
and meta_block_size. But the only SSD that may fit into this category is
Intel Optane (probably, not tested yet).
Clients don't need to be aware of disk_alignment, so it's not required to
put a modified value into etcd key /vitastor/config/global.

View File

@ -0,0 +1,185 @@
[Документация](../../README-ru.md#документация) → [Конфигурация](../config.ru.md) → Дисковые параметры OSD
-----
[Read in English](layout-osd.en.md)
# Дисковые параметры OSD
Данные параметры используются только OSD и, также как и общекластерные
дисковые параметры, задаются в момент инициализации дисков OSD и не могут быть
изменены после этого без потери данных.
- [data_device](#data_device)
- [meta_device](#meta_device)
- [journal_device](#journal_device)
- [journal_offset](#journal_offset)
- [journal_size](#journal_size)
- [meta_offset](#meta_offset)
- [data_offset](#data_offset)
- [data_size](#data_size)
- [meta_block_size](#meta_block_size)
- [journal_block_size](#journal_block_size)
- [disable_data_fsync](#disable_data_fsync)
- [disable_meta_fsync](#disable_meta_fsync)
- [disable_journal_fsync](#disable_journal_fsync)
- [disable_device_lock](#disable_device_lock)
- [disk_alignment](#disk_alignment)
## data_device
- Тип: строка
Путь к диску (блочному устройству) для хранения данных. Крайне рекомендуется
использовать стабильные пути: `/dev/disk/by-partuuid/xxx...` вместо простых
`/dev/sda` или `/dev/nvme0n1`, чтобы пути не могли спутаться после
перезагрузки сервера. Также вместо блочных устройств можно указывать файлы,
но это реализовано только для тестирования, а не для боевой среды.
## meta_device
- Тип: строка
Путь к диску метаданных. Метаданные должны располагаться на быстром
SSD-диске, иначе производительность пострадает. Если эта опция не указана,
для метаданных используется `data_device`.
## journal_device
- Тип: строка
Путь к диску журнала. Журнал должен располагаться на быстром SSD-диске,
иначе производительность пострадает. Если эта опция не указана,
для журнала используется `meta_device`, если же пуста и она, журнал
располагается на `data_device`. Нормально располагать журнал и метаданные
на одном устройстве, в этом случае достаточно указать только `meta_device`.
## journal_offset
- Тип: целое число
- Значение по умолчанию: 0
Смещение на устройстве в байтах, по которому располагается журнал.
## journal_size
- Тип: целое число
Размер журнала в байтах. По умолчанию для журнала используется всё доступное
место между journal_offset и data_offset, meta_offset или концом диска.
В SSD-кластерах большие журналы не нужны, достаточно 32 МБ. В гибридных
(SSD+HDD) кластерах осмысленно использовать больший размер журнал (например, 1 ГБ)
и включить [throttle_small_writes](osd.ru.md#throttle_small_writes).
## meta_offset
- Тип: целое число
- Значение по умолчанию: 0
Смещение на устройстве в байтах, по которому располагаются метаданные.
Эту опцию нужно задать, если метаданные у вас хранятся на том же
устройстве, что данные или журнал.
## data_offset
- Тип: целое число
- Значение по умолчанию: 0
Смещение на устройстве в байтах, по которому располагаются данные.
Эту опцию нужно задать, если данные у вас хранятся на том же
устройстве, что метаданные или журнал.
## data_size
- Тип: целое число
Размер области данных в байтах. По умолчанию под данные будет использована
вся доступная область устройства данных до конца устройства, но вы можете
использовать эту опцию, чтобы ограничить её меньшим размером. Заметьте, что
опции размера области метаданных нет - она вычисляется из размера области
данных автоматически.
## meta_block_size
- Тип: целое число
- Значение по умолчанию: 4096
Размер физического блока устройства метаданных. 4096 для большинства
современных SSD и HDD.
## journal_block_size
- Тип: целое число
- Значение по умолчанию: 4096
Размер физического блока устройства журнала. Должен быть кратен
`disk_alignment`. 4096 для большинства современных SSD и HDD.
## disable_data_fsync
- Тип: булево (да/нет)
- Значение по умолчанию: false
Не отправлять fsync-и устройству данных, т.е. не сбрасывать его кэш.
Безопасно, ТОЛЬКО если ваше устройство данных имеет кэш со сквозной
записью (write-through). Если вы отключаете кэш через `hdparm` или
`scsi_disk/cache_type`, то удостоверьтесь, что команда отключения кэша
выполняется перед каждым запуском Vitastor OSD, например, в systemd unit-е.
Смотрите также опцию `immediate_commit` для инструкций по отключению кэша
и о том, как из этого извлечь выгоду.
## disable_meta_fsync
- Тип: булево (да/нет)
- Значение по умолчанию: false
То же, что disable_data_fsync, но для устройства метаданных. Если устройство
метаданных не задано или если оно равно устройству данных, значение опции
игнорируется и вместо него используется значение опции disable_data_fsync.
## disable_journal_fsync
- Тип: булево (да/нет)
- Значение по умолчанию: false
То же, что disable_data_fsync, но для устройства журнала. Если устройство
журнала не задано или если оно равно устройству метаданных, значение опции
игнорируется и вместо него используется значение опции disable_meta_fsync.
Если одно и то же устройство используется и под данные, и под журнал, и под
метаданные - значение опции также игнорируется и вместо него используется
значение опции disable_data_fsync.
## disable_device_lock
- Тип: булево (да/нет)
- Значение по умолчанию: false
Не блокировать устройства данных, метаданных и журнала от открытия их
другими OSD с помощью flock(). Так делать не рекомендуется, но теоретически
вы можете это использовать, чтобы запускать несколько OSD на одном
устройстве с разными смещениями и без использования разделов.
## disk_alignment
- Тип: целое число
- Значение по умолчанию: 4096
Требуемое выравнивание записи на физические диски. Почти все современные
SSD и HDD диски используют 4 КБ физические секторы, даже если показывают
логический размер сектора 512 байт, поэтому 4 КБ - хорошее значение по
умолчанию.
Однако стоит понимать, что физический размер сектора тоже влияет на
избыточную запись (WA), потому что ничего меньше блока (сектора) на блочное
устройство записать невозможно. Таким образом, когда Vitastor-у нужно
записать на диск всего лишь одну 32-байтную запись метаданных, фактически
приходится перезаписывать 4 КБ сектор целиком.
Поэтому, на самом деле, может быть выгодно найти SSD, хорошо работающие с
меньшими, 512-байтными, блоками и использовать 512-байтные disk_alignment,
journal_block_size и meta_block_size. Однако единственные SSD, которые
теоретически могут попасть в эту категорию - это Intel Optane (но и это
пока не проверялось автором).
Клиентам не обязательно знать про disk_alignment, так что помещать значение
этого параметра в etcd в /vitastor/config/global не нужно.

79
docs/config/monitor.en.md Normal file
View File

@ -0,0 +1,79 @@
[Documentation](../../README.md#documentation) → [Configuration](../config.en.md) → Monitor Parameters
-----
[Читать на русском](monitor.ru.md)
# Monitor Parameters
These parameters only apply to Monitors.
- [etcd_mon_ttl](#etcd_mon_ttl)
- [etcd_mon_timeout](#etcd_mon_timeout)
- [etcd_mon_retries](#etcd_mon_retries)
- [mon_change_timeout](#mon_change_timeout)
- [mon_stats_timeout](#mon_stats_timeout)
- [osd_out_time](#osd_out_time)
- [placement_levels](#placement_levels)
## etcd_mon_ttl
- Type: seconds
- Default: 30
- Minimum: 10
Monitor etcd lease refresh interval in seconds
## etcd_mon_timeout
- Type: milliseconds
- Default: 1000
etcd request timeout used by monitor
## etcd_mon_retries
- Type: integer
- Default: 5
Maximum number of attempts for one monitor etcd request
## mon_change_timeout
- Type: milliseconds
- Default: 1000
- Minimum: 100
Optimistic retry interval for monitor etcd modification requests
## mon_stats_timeout
- Type: milliseconds
- Default: 1000
- Minimum: 100
Interval for monitor to wait before updating aggregated statistics in
etcd after receiving OSD statistics updates
## osd_out_time
- Type: seconds
- Default: 600
Time after which a failed OSD is removed from the data distribution.
I.e. time which the monitor waits before attempting to restore data
redundancy using other OSDs.
## placement_levels
- Type: json
- Default: `{"host":100,"osd":101}`
Levels for the placement tree. You can define arbitrary tree levels by
defining them in this parameter. The configuration parameter value should
contain a JSON object with level names as keys and integer priorities as
values. Smaller priority means higher level in tree. For example,
"datacenter" should have smaller priority than "osd". "host" and "osd"
levels are always predefined and can't be removed. If one of them is not
present in the configuration, then it is defined with the default priority
(100 for "host", 101 for "osd").

80
docs/config/monitor.ru.md Normal file
View File

@ -0,0 +1,80 @@
[Документация](../../README-ru.md#документация) → [Конфигурация](../config.ru.md) → Параметры мониторов
-----
[Read in English](monitor.en.md)
# Параметры мониторов
Данные параметры используются только мониторами Vitastor.
- [etcd_mon_ttl](#etcd_mon_ttl)
- [etcd_mon_timeout](#etcd_mon_timeout)
- [etcd_mon_retries](#etcd_mon_retries)
- [mon_change_timeout](#mon_change_timeout)
- [mon_stats_timeout](#mon_stats_timeout)
- [osd_out_time](#osd_out_time)
- [placement_levels](#placement_levels)
## etcd_mon_ttl
- Тип: секунды
- Значение по умолчанию: 30
- Минимальное значение: 10
Интервал обновления etcd резервации (lease) монитором
## etcd_mon_timeout
- Тип: миллисекунды
- Значение по умолчанию: 1000
Таймаут выполнения запросов к etcd от монитора
## etcd_mon_retries
- Тип: целое число
- Значение по умолчанию: 5
Максимальное число попыток выполнения запросов к etcd монитором
## mon_change_timeout
- Тип: миллисекунды
- Значение по умолчанию: 1000
- Минимальное значение: 100
Время повтора при коллизиях при запросах модификации в etcd, производимых монитором
## mon_stats_timeout
- Тип: миллисекунды
- Значение по умолчанию: 1000
- Минимальное значение: 100
Интервал, который монитор ожидает при изменении статистики по отдельным
OSD перед обновлением агрегированной статистики в etcd
## osd_out_time
- Тип: секунды
- Значение по умолчанию: 600
Время, через которое отключенный OSD исключается из распределения данных.
То есть, время, которое монитор ожидает перед попыткой переместить данные
на другие OSD и таким образом восстановить избыточность хранения.
## placement_levels
- Тип: json
- Значение по умолчанию: `{"host":100,"osd":101}`
Определения уровней для дерева размещения OSD. Вы можете определять
произвольные уровни, помещая их в данный параметр конфигурации. Значение
параметра должно содержать JSON-объект, ключи которого будут являться
названиями уровней, а значения - целочисленными приоритетами. Меньшие
приоритеты соответствуют верхним уровням дерева. Например, уровень
"датацентр" должен иметь меньший приоритет, чем "OSD". Уровни с названиями
"host" и "osd" являются предопределёнными и не могут быть удалены. Если
один из них отсутствует в конфигурации, он доопределяется с приоритетом по
умолчанию (100 для уровня "host", 101 для "osd").

214
docs/config/network.en.md Normal file
View File

@ -0,0 +1,214 @@
[Documentation](../../README.md#documentation) → [Configuration](../config.en.md) → Network Protocol Parameters
-----
[Читать на русском](network.ru.md)
# Network Protocol Parameters
These parameters apply to clients and OSDs and affect network connection logic
between clients, OSDs and etcd.
- [tcp_header_buffer_size](#tcp_header_buffer_size)
- [use_sync_send_recv](#use_sync_send_recv)
- [use_rdma](#use_rdma)
- [rdma_device](#rdma_device)
- [rdma_port_num](#rdma_port_num)
- [rdma_gid_index](#rdma_gid_index)
- [rdma_mtu](#rdma_mtu)
- [rdma_max_sge](#rdma_max_sge)
- [rdma_max_msg](#rdma_max_msg)
- [rdma_max_recv](#rdma_max_recv)
- [peer_connect_interval](#peer_connect_interval)
- [peer_connect_timeout](#peer_connect_timeout)
- [osd_idle_timeout](#osd_idle_timeout)
- [osd_ping_timeout](#osd_ping_timeout)
- [up_wait_retry_interval](#up_wait_retry_interval)
- [max_etcd_attempts](#max_etcd_attempts)
- [etcd_quick_timeout](#etcd_quick_timeout)
- [etcd_slow_timeout](#etcd_slow_timeout)
- [etcd_keepalive_timeout](#etcd_keepalive_timeout)
- [etcd_ws_keepalive_timeout](#etcd_ws_keepalive_timeout)
## tcp_header_buffer_size
- Type: integer
- Default: 65536
Size of the buffer used to read data using an additional copy. Vitastor
packet headers are 128 bytes, payload is always at least 4 KB, so it is
usually beneficial to try to read multiple packets at once even though
it requires to copy the data an additional time. The rest of each packet
is received without an additional copy. You can try to play with this
parameter and see how it affects random iops and linear bandwidth if you
want.
## use_sync_send_recv
- Type: boolean
- Default: false
If true, synchronous send/recv syscalls are used instead of io_uring for
socket communication. Useless for OSDs because they require io_uring anyway,
but may be required for clients with old kernel versions.
## use_rdma
- Type: boolean
- Default: true
Try to use RDMA for communication if it's available. Disable if you don't
want Vitastor to use RDMA. TCP-only clients can also talk to an RDMA-enabled
cluster, so disabling RDMA may be needed if clients have RDMA devices,
but they are not connected to the cluster.
## rdma_device
- Type: string
RDMA device name to use for Vitastor OSD communications (for example,
"rocep5s0f0"). Please note that Vitastor RDMA requires Implicit On-Demand
Paging (Implicit ODP) and Scatter/Gather (SG) support from the RDMA device
to work. For example, Mellanox ConnectX-3 and older adapters don't have
Implicit ODP, so they're unsupported by Vitastor. Run `ibv_devinfo -v` as
root to list available RDMA devices and their features.
## rdma_port_num
- Type: integer
- Default: 1
RDMA device port number to use. Only for devices that have more than 1 port.
See `phys_port_cnt` in `ibv_devinfo -v` output to determine how many ports
your device has.
## rdma_gid_index
- Type: integer
- Default: 0
Global address identifier index of the RDMA device to use. Different GID
indexes may correspond to different protocols like RoCEv1, RoCEv2 and iWARP.
Search for "GID" in `ibv_devinfo -v` output to determine which GID index
you need.
**IMPORTANT:** If you want to use RoCEv2 (as recommended) then the correct
rdma_gid_index is usually 1 (IPv6) or 3 (IPv4).
## rdma_mtu
- Type: integer
- Default: 4096
RDMA Path MTU to use. Must be 1024, 2048 or 4096. There is usually no
sense to change it from the default 4096.
## rdma_max_sge
- Type: integer
- Default: 128
Maximum number of scatter/gather entries to use for RDMA. OSDs negotiate
the actual value when establishing connection anyway, so it's usually not
required to change this parameter.
## rdma_max_msg
- Type: integer
- Default: 1048576
Maximum size of a single RDMA send or receive operation in bytes.
## rdma_max_recv
- Type: integer
- Default: 8
Maximum number of parallel RDMA receive operations. Note that this number
of receive buffers `rdma_max_msg` in size are allocated for each client,
so this setting actually affects memory usage. This is because RDMA receive
operations are (sadly) still not zero-copy in Vitastor. It may be fixed in
later versions.
## peer_connect_interval
- Type: seconds
- Default: 5
- Minimum: 1
Interval before attempting to reconnect to an unavailable OSD.
## peer_connect_timeout
- Type: seconds
- Default: 5
- Minimum: 1
Timeout for OSD connection attempts.
## osd_idle_timeout
- Type: seconds
- Default: 5
- Minimum: 1
OSD connection inactivity time after which clients and other OSDs send
keepalive requests to check state of the connection.
## osd_ping_timeout
- Type: seconds
- Default: 5
- Minimum: 1
Maximum time to wait for OSD keepalive responses. If an OSD doesn't respond
within this time, the connection to it is dropped and a reconnection attempt
is scheduled.
## up_wait_retry_interval
- Type: milliseconds
- Default: 500
- Minimum: 50
OSDs respond to clients with a special error code when they receive I/O
requests for a PG that's not synchronized and started. This parameter sets
the time for the clients to wait before re-attempting such I/O requests.
## max_etcd_attempts
- Type: integer
- Default: 5
Maximum number of attempts for etcd requests which can't be retried
indefinitely.
## etcd_quick_timeout
- Type: milliseconds
- Default: 1000
Timeout for etcd requests which should complete quickly, like lease refresh.
## etcd_slow_timeout
- Type: milliseconds
- Default: 5000
Timeout for etcd requests which are allowed to wait for some time.
## etcd_keepalive_timeout
- Type: seconds
- Default: max(30, etcd_report_interval*2)
Timeout for etcd connection HTTP Keep-Alive. Should be higher than
etcd_report_interval to guarantee that keepalive actually works.
## etcd_ws_keepalive_timeout
- Type: seconds
- Default: 30
etcd websocket ping interval required to keep the connection alive and
detect disconnections quickly.

224
docs/config/network.ru.md Normal file
View File

@ -0,0 +1,224 @@
[Документация](../../README-ru.md#документация) → [Конфигурация](../config.ru.md) → Параметры сетевого протокола
-----
[Read in English](network.en.md)
# Параметры сетевого протокола
Данные параметры используются клиентами и OSD и влияют на логику сетевого
взаимодействия между клиентами, OSD, а также etcd.
- [tcp_header_buffer_size](#tcp_header_buffer_size)
- [use_sync_send_recv](#use_sync_send_recv)
- [use_rdma](#use_rdma)
- [rdma_device](#rdma_device)
- [rdma_port_num](#rdma_port_num)
- [rdma_gid_index](#rdma_gid_index)
- [rdma_mtu](#rdma_mtu)
- [rdma_max_sge](#rdma_max_sge)
- [rdma_max_msg](#rdma_max_msg)
- [rdma_max_recv](#rdma_max_recv)
- [peer_connect_interval](#peer_connect_interval)
- [peer_connect_timeout](#peer_connect_timeout)
- [osd_idle_timeout](#osd_idle_timeout)
- [osd_ping_timeout](#osd_ping_timeout)
- [up_wait_retry_interval](#up_wait_retry_interval)
- [max_etcd_attempts](#max_etcd_attempts)
- [etcd_quick_timeout](#etcd_quick_timeout)
- [etcd_slow_timeout](#etcd_slow_timeout)
- [etcd_keepalive_timeout](#etcd_keepalive_timeout)
- [etcd_ws_keepalive_timeout](#etcd_ws_keepalive_timeout)
## tcp_header_buffer_size
- Тип: целое число
- Значение по умолчанию: 65536
Размер буфера для чтения данных с дополнительным копированием. Пакеты
Vitastor содержат 128-байтные заголовки, за которыми следуют данные размером
от 4 КБ и для мелких операций ввода-вывода обычно выгодно за 1 вызов читать
сразу несколько пакетов, даже не смотря на то, что это требует лишний раз
скопировать данные. Часть каждого пакета за пределами значения данного
параметра читается без дополнительного копирования. Вы можете попробовать
поменять этот параметр и посмотреть, как он влияет на производительность
случайного и линейного доступа.
## use_sync_send_recv
- Тип: булево (да/нет)
- Значение по умолчанию: false
Если установлено в истину, то вместо io_uring для передачи данных по сети
будут использоваться обычные синхронные системные вызовы send/recv. Для OSD
это бессмысленно, так как OSD в любом случае нуждается в io_uring, но, в
принципе, это может применяться для клиентов со старыми версиями ядра.
## use_rdma
- Тип: булево (да/нет)
- Значение по умолчанию: true
Пытаться использовать RDMA для связи при наличии доступных устройств.
Отключите, если вы не хотите, чтобы Vitastor использовал RDMA.
TCP-клиенты также могут работать с RDMA-кластером, так что отключать
RDMA может быть нужно только если у клиентов есть RDMA-устройства,
но они не имеют соединения с кластером Vitastor.
## rdma_device
- Тип: строка
Название RDMA-устройства для связи с Vitastor OSD (например, "rocep5s0f0").
Имейте в виду, что поддержка RDMA в Vitastor требует функций устройства
Implicit On-Demand Paging (Implicit ODP) и Scatter/Gather (SG). Например,
адаптеры Mellanox ConnectX-3 и более старые не поддерживают Implicit ODP и
потому не поддерживаются в Vitastor. Запустите `ibv_devinfo -v` от имени
суперпользователя, чтобы посмотреть список доступных RDMA-устройств, их
параметры и возможности.
## rdma_port_num
- Тип: целое число
- Значение по умолчанию: 1
Номер порта RDMA-устройства, который следует использовать. Имеет смысл
только для устройств, у которых более 1 порта. Чтобы узнать, сколько портов
у вашего адаптера, посмотрите `phys_port_cnt` в выводе команды
`ibv_devinfo -v`.
## rdma_gid_index
- Тип: целое число
- Значение по умолчанию: 0
Номер глобального идентификатора адреса RDMA-устройства, который следует
использовать. Разным gid_index могут соответствовать разные протоколы связи:
RoCEv1, RoCEv2, iWARP. Чтобы понять, какой нужен вам - смотрите строчки со
словом "GID" в выводе команды `ibv_devinfo -v`.
**ВАЖНО:** Если вы хотите использовать RoCEv2 (как мы и рекомендуем), то
правильный rdma_gid_index, как правило, 1 (IPv6) или 3 (IPv4).
## rdma_mtu
- Тип: целое число
- Значение по умолчанию: 4096
Максимальная единица передачи (Path MTU) для RDMA. Должно быть равно 1024,
2048 или 4096. Обычно нет смысла менять значение по умолчанию, равное 4096.
## rdma_max_sge
- Тип: целое число
- Значение по умолчанию: 128
Максимальное число записей разделения/сборки (scatter/gather) для RDMA.
OSD в любом случае согласовывают реальное значение при установке соединения,
так что менять этот параметр обычно не нужно.
## rdma_max_msg
- Тип: целое число
- Значение по умолчанию: 1048576
Максимальный размер одной RDMA-операции отправки или приёма.
## rdma_max_recv
- Тип: целое число
- Значение по умолчанию: 8
Максимальное число параллельных RDMA-операций получения данных. Следует
иметь в виду, что данное число буферов размером `rdma_max_msg` выделяется
для каждого подключённого клиентского соединения, так что данная настройка
влияет на потребление памяти. Это так потому, что RDMA-приём данных в
Vitastor, увы, всё равно не является zero-copy, т.е. всё равно 1 раз
копирует данные в памяти. Данная особенность, возможно, будет исправлена в
более новых версиях Vitastor.
## peer_connect_interval
- Тип: секунды
- Значение по умолчанию: 5
- Минимальное значение: 1
Время ожидания перед повторной попыткой соединиться с недоступным OSD.
## peer_connect_timeout
- Тип: секунды
- Значение по умолчанию: 5
- Минимальное значение: 1
Максимальное время ожидания попытки соединения с OSD.
## osd_idle_timeout
- Тип: секунды
- Значение по умолчанию: 5
- Минимальное значение: 1
Время неактивности соединения с OSD, после которого клиенты или другие OSD
посылают запрос проверки состояния соединения.
## osd_ping_timeout
- Тип: секунды
- Значение по умолчанию: 5
- Минимальное значение: 1
Максимальное время ожидания ответа на запрос проверки состояния соединения.
Если OSD не отвечает за это время, соединение отключается и производится
повторная попытка соединения.
## up_wait_retry_interval
- Тип: миллисекунды
- Значение по умолчанию: 500
- Минимальное значение: 50
Когда OSD получают от клиентов запросы ввода-вывода, относящиеся к не
поднятым на данный момент на них PG, либо к PG в процессе синхронизации,
они отвечают клиентам специальным кодом ошибки, означающим, что клиент
должен некоторое время подождать перед повторением запроса. Именно это время
ожидания задаёт данный параметр.
## max_etcd_attempts
- Тип: целое число
- Значение по умолчанию: 5
Максимальное число попыток выполнения запросов к etcd для тех запросов,
которые нельзя повторять бесконечно.
## etcd_quick_timeout
- Тип: миллисекунды
- Значение по умолчанию: 1000
Максимальное время выполнения запросов к etcd, которые должны завершаться
быстро, таких, как обновление резервации (lease).
## etcd_slow_timeout
- Тип: миллисекунды
- Значение по умолчанию: 5000
Максимальное время выполнения запросов к etcd, для которых не обязательно
гарантировать быстрое выполнение.
## etcd_keepalive_timeout
- Тип: секунды
- Значение по умолчанию: max(30, etcd_report_interval*2)
Таймаут для HTTP Keep-Alive в соединениях к etcd. Должен быть больше, чем
etcd_report_interval, чтобы keepalive гарантированно работал.
## etcd_ws_keepalive_timeout
- Тип: секунды
- Значение по умолчанию: 30
Интервал проверки живости вебсокет-подключений к etcd.

297
docs/config/osd.en.md Normal file
View File

@ -0,0 +1,297 @@
[Documentation](../../README.md#documentation) → [Configuration](../config.en.md) → Runtime OSD Parameters
-----
[Читать на русском](osd.ru.md)
# Runtime OSD Parameters
These parameters only apply to OSDs, are not fixed at the moment of OSD drive
initialization and can be changed with an OSD restart.
- [etcd_report_interval](#etcd_report_interval)
- [run_primary](#run_primary)
- [osd_network](#osd_network)
- [bind_address](#bind_address)
- [bind_port](#bind_port)
- [autosync_interval](#autosync_interval)
- [autosync_writes](#autosync_writes)
- [recovery_queue_depth](#recovery_queue_depth)
- [recovery_sync_batch](#recovery_sync_batch)
- [readonly](#readonly)
- [no_recovery](#no_recovery)
- [no_rebalance](#no_rebalance)
- [print_stats_interval](#print_stats_interval)
- [slow_log_interval](#slow_log_interval)
- [max_write_iodepth](#max_write_iodepth)
- [min_flusher_count](#min_flusher_count)
- [max_flusher_count](#max_flusher_count)
- [inmemory_metadata](#inmemory_metadata)
- [inmemory_journal](#inmemory_journal)
- [journal_sector_buffer_count](#journal_sector_buffer_count)
- [journal_no_same_sector_overwrites](#journal_no_same_sector_overwrites)
- [throttle_small_writes](#throttle_small_writes)
- [throttle_target_iops](#throttle_target_iops)
- [throttle_target_mbs](#throttle_target_mbs)
- [throttle_target_parallelism](#throttle_target_parallelism)
- [throttle_threshold_us](#throttle_threshold_us)
- [osd_memlock](#osd_memlock)
## etcd_report_interval
- Type: seconds
- Default: 5
Interval at which OSDs report their state to etcd. Affects OSD lease time
and thus the failover speed. Lease time is equal to this parameter value
plus max_etcd_attempts * etcd_quick_timeout because it should be guaranteed
that every OSD always refreshes its lease in time.
## run_primary
- Type: boolean
- Default: true
Start primary OSD logic on this OSD. As of now, can be turned off only for
debugging purposes. It's possible to implement additional feature for the
monitor which may allow to separate primary and secondary OSDs, but it's
unclear why anyone could need it, so it's not implemented.
## osd_network
- Type: string or array of strings
Network mask of the network (IPv4 or IPv6) to use for OSDs. Note that
although it's possible to specify multiple networks here, this does not
mean that OSDs will create multiple listening sockets - they'll only
pick the first matching address of an UP + RUNNING interface. Separate
networks for cluster and client connections are also not implemented, but
they are mostly useless anyway, so it's not a big deal.
## bind_address
- Type: string
- Default: 0.0.0.0
Instead of the network mask, you can also set OSD listen address explicitly
using this parameter. May be useful if you want to start OSDs on interfaces
that are not UP + RUNNING.
## bind_port
- Type: integer
By default, OSDs pick random ports to use for incoming connections
automatically. With this option you can set a specific port for a specific
OSD by hand.
## autosync_interval
- Type: seconds
- Default: 5
Time interval at which automatic fsyncs/flushes are issued by each OSD when
the immediate_commit mode if disabled. fsyncs are required because without
them OSDs quickly fill their journals, become unable to clear them and
stall. Also this option limits the amount of recent uncommitted changes
which OSDs may lose in case of a power outage in case when clients don't
issue fsyncs at all.
## autosync_writes
- Type: integer
- Default: 128
Same as autosync_interval, but sets the maximum number of uncommitted write
operations before issuing an fsync operation internally.
## recovery_queue_depth
- Type: integer
- Default: 4
Maximum recovery operations per one primary OSD at any given moment of time.
Currently it's the only parameter available to tune the speed or recovery
and rebalancing, but it's planned to implement more.
## recovery_sync_batch
- Type: integer
- Default: 16
Maximum number of recovery operations before issuing an additional fsync.
## readonly
- Type: boolean
- Default: false
Read-only mode. If this is enabled, an OSD will never issue any writes to
the underlying device. This may be useful for recovery purposes.
## no_recovery
- Type: boolean
- Default: false
Disable automatic background recovery of objects. Note that it doesn't
affect implicit recovery of objects happening during writes - a write is
always made to a full set of at least pg_minsize OSDs.
## no_rebalance
- Type: boolean
- Default: false
Disable background movement of data between different OSDs. Disabling it
means that PGs in the `has_misplaced` state will be left in it indefinitely.
## print_stats_interval
- Type: seconds
- Default: 3
Time interval at which OSDs print simple human-readable operation
statistics on stdout.
## slow_log_interval
- Type: seconds
- Default: 10
Time interval at which OSDs dump slow or stuck operations on stdout, if
they're any. Also it's the time after which an operation is considered
"slow".
## max_write_iodepth
- Type: integer
- Default: 128
Parallel client write operation limit per one OSD. Operations that exceed
this limit are pushed to a temporary queue instead of being executed
immediately.
## min_flusher_count
- Type: integer
- Default: 1
Flusher is a micro-thread that moves data from the journal to the data
area of the device. Their number is auto-tuned between minimum and maximum.
Minimum number is set by this parameter.
## max_flusher_count
- Type: integer
- Default: 256
Maximum number of journal flushers (see above min_flusher_count).
## inmemory_metadata
- Type: boolean
- Default: true
This parameter makes Vitastor always keep metadata area of the block device
in memory. It's required for good performance because it allows to avoid
additional read-modify-write cycles during metadata modifications. Metadata
area size is currently roughly 224 MB per 1 TB of data. You can turn it off
to reduce memory usage by this value, but it will hurt performance. This
restriction is likely to be removed in the future along with the upgrade
of the metadata storage scheme.
## inmemory_journal
- Type: boolean
- Default: true
This parameter make Vitastor always keep journal area of the block
device in memory. Turning it off will, again, reduce memory usage, but
hurt performance because flusher coroutines will have to read data from
the disk back before copying it into the main area. The memory usage benefit
is typically very small because it's sufficient to have 16-32 MB journal
for SSD OSDs. However, in theory it's possible that you'll want to turn it
off for hybrid (HDD+SSD) OSDs with large journals on quick devices.
## journal_sector_buffer_count
- Type: integer
- Default: 32
Maximum number of buffers that can be used for writing journal metadata
blocks. The only situation when you should increase it to a larger value
is when you enable journal_no_same_sector_overwrites. In this case set
it to, for example, 1024.
## journal_no_same_sector_overwrites
- Type: boolean
- Default: false
Enable this option for SSDs like Intel D3-S4510 and D3-S4610 which REALLY
don't like when a program overwrites the same sector multiple times in a
row and slow down significantly (from 25000+ iops to ~3000 iops). When
this option is set, Vitastor will always move to the next sector of the
journal after writing it instead of possibly overwriting it the second time.
Most (99%) other SSDs don't need this option.
## throttle_small_writes
- Type: boolean
- Default: false
Enable soft throttling of small journaled writes. Useful for hybrid OSDs
with fast journal/metadata devices and slow data devices. The idea is that
small writes complete very quickly because they're first written to the
journal device, but moving them to the main device is slow. So if an OSD
allows clients to issue a lot of small writes it will perform very good
for several seconds and then the journal will fill up and the performance
will drop to almost zero. Throttling is meant to prevent this problem by
artifically slowing quick writes down based on the amount of free space in
the journal. When throttling is used, the performance of small writes will
decrease smoothly instead of abrupt drop at the moment when the journal
fills up.
## throttle_target_iops
- Type: integer
- Default: 100
Target maximum number of throttled operations per second under the condition
of full journal. Set it to approximate random write iops of your data devices
(HDDs).
## throttle_target_mbs
- Type: integer
- Default: 100
Target maximum bandwidth in MB/s of throttled operations per second under
the condition of full journal. Set it to approximate linear write
performance of your data devices (HDDs).
## throttle_target_parallelism
- Type: integer
- Default: 1
Target maximum parallelism of throttled operations under the condition of
full journal. Set it to approximate internal parallelism of your data
devices (1 for HDDs, 4-8 for SSDs).
## throttle_threshold_us
- Type: microseconds
- Default: 50
Minimal computed delay to be applied to throttled operations. Usually
doesn't need to be changed.
## osd_memlock
- Type: boolean
- Default: false
Lock all OSD memory to prevent it from being unloaded into swap with mlockall(). Requires sufficient ulimit -l (max locked memory).

310
docs/config/osd.ru.md Normal file
View File

@ -0,0 +1,310 @@
[Документация](../../README-ru.md#документация) → [Конфигурация](../config.ru.md) → Изменяемые параметры OSD
-----
[Read in English](osd.en.md)
# Изменяемые параметры OSD
Данные параметры используются только OSD, но, в отличие от дисковых параметров,
не фиксируются в момент инициализации дисков OSD и могут быть изменены в любой
момент с перезапуском OSD.
- [etcd_report_interval](#etcd_report_interval)
- [run_primary](#run_primary)
- [osd_network](#osd_network)
- [bind_address](#bind_address)
- [bind_port](#bind_port)
- [autosync_interval](#autosync_interval)
- [autosync_writes](#autosync_writes)
- [recovery_queue_depth](#recovery_queue_depth)
- [recovery_sync_batch](#recovery_sync_batch)
- [readonly](#readonly)
- [no_recovery](#no_recovery)
- [no_rebalance](#no_rebalance)
- [print_stats_interval](#print_stats_interval)
- [slow_log_interval](#slow_log_interval)
- [max_write_iodepth](#max_write_iodepth)
- [min_flusher_count](#min_flusher_count)
- [max_flusher_count](#max_flusher_count)
- [inmemory_metadata](#inmemory_metadata)
- [inmemory_journal](#inmemory_journal)
- [journal_sector_buffer_count](#journal_sector_buffer_count)
- [journal_no_same_sector_overwrites](#journal_no_same_sector_overwrites)
- [throttle_small_writes](#throttle_small_writes)
- [throttle_target_iops](#throttle_target_iops)
- [throttle_target_mbs](#throttle_target_mbs)
- [throttle_target_parallelism](#throttle_target_parallelism)
- [throttle_threshold_us](#throttle_threshold_us)
- [osd_memlock](#osd_memlock)
## etcd_report_interval
- Тип: секунды
- Значение по умолчанию: 5
Интервал, с которым OSD обновляет своё состояние в etcd. Значение параметра
влияет на время резервации (lease) OSD и поэтому на скорость переключения
при падении OSD. Время lease равняется значению этого параметра плюс
max_etcd_attempts * etcd_quick_timeout.
## run_primary
- Тип: булево (да/нет)
- Значение по умолчанию: true
Запускать логику первичного OSD на данном OSD. На данный момент отключать
эту опцию может иметь смысл только в целях отладки. В теории, можно
реализовать дополнительный режим для монитора, который позволит отделять
первичные OSD от вторичных, но пока не понятно, зачем это может кому-то
понадобиться, поэтому это не реализовано.
## osd_network
- Тип: строка или массив строк
Маска подсети (IPv4 или IPv6) для использования для соединений с OSD.
Имейте в виду, что хотя сейчас и можно передать в этот параметр несколько
подсетей, это не означает, что OSD будут создавать несколько слушающих
сокетов - они лишь будут выбирать адрес первого поднятого (состояние UP +
RUNNING), подходящий под заданную маску. Также не реализовано разделение
кластерной и публичной сетей OSD. Правда, от него обычно всё равно довольно
мало толку, так что особенной проблемы в этом нет.
## bind_address
- Тип: строка
- Значение по умолчанию: 0.0.0.0
Этим параметром можно явным образом задать адрес, на котором будет ожидать
соединений OSD (вместо использования маски подсети). Может быть полезно,
например, чтобы запускать OSD на неподнятых интерфейсах (не UP + RUNNING).
## bind_port
- Тип: целое число
По умолчанию OSD сами выбирают случайные порты для входящих подключений.
С помощью данной опции вы можете задать порт для отдельного OSD вручную.
## autosync_interval
- Тип: секунды
- Значение по умолчанию: 5
Временной интервал отправки автоматических fsync-ов (операций очистки кэша)
каждым OSD для случая, когда режим immediate_commit отключён. fsync-и нужны
OSD, чтобы успевать очищать журнал - без них OSD быстро заполняют журналы и
перестают обрабатывать операции записи. Также эта опция ограничивает объём
недавних незафиксированных изменений, которые OSD могут терять при
отключении питания, если клиенты вообще не отправляют fsync.
## autosync_writes
- Тип: целое число
- Значение по умолчанию: 128
Аналогично autosync_interval, но задаёт не временной интервал, а
максимальное количество незафиксированных операций записи перед
принудительной отправкой fsync-а.
## recovery_queue_depth
- Тип: целое число
- Значение по умолчанию: 4
Максимальное число операций восстановления на одном первичном OSD в любой
момент времени. На данный момент единственный параметр, который можно менять
для ускорения или замедления восстановления и перебалансировки данных, но
в планах реализация других параметров.
## recovery_sync_batch
- Тип: целое число
- Значение по умолчанию: 16
Максимальное число операций восстановления перед дополнительным fsync.
## readonly
- Тип: булево (да/нет)
- Значение по умолчанию: false
Режим "только чтение". Если включить этот режим, OSD не будет писать ничего
на диск. Может быть полезно в целях восстановления.
## no_recovery
- Тип: булево (да/нет)
- Значение по умолчанию: false
Отключить автоматическое фоновое восстановление объектов. Обратите внимание,
что эта опция не отключает восстановление объектов, происходящее при
записи - запись всегда производится в полный набор из как минимум pg_minsize
OSD.
## no_rebalance
- Тип: булево (да/нет)
- Значение по умолчанию: false
Отключить фоновое перемещение объектов между разными OSD. Отключение
означает, что PG, находящиеся в состоянии `has_misplaced`, будут оставлены
в нём на неопределённый срок.
## print_stats_interval
- Тип: секунды
- Значение по умолчанию: 3
Временной интервал, с которым OSD печатают простую человекочитаемую
статистику выполнения операций в стандартный вывод.
## slow_log_interval
- Тип: секунды
- Значение по умолчанию: 10
Временной интервал, с которым OSD выводят в стандартный вывод список
медленных или зависших операций, если таковые имеются. Также время, при
превышении которого операция считается "медленной".
## max_write_iodepth
- Тип: целое число
- Значение по умолчанию: 128
Максимальное число одновременных клиентских операций записи на один OSD.
Операции, превышающие этот лимит, не исполняются сразу, а сохраняются во
временной очереди.
## min_flusher_count
- Тип: целое число
- Значение по умолчанию: 1
Flusher - это микро-поток (корутина), которая копирует данные из журнала в
основную область устройства данных. Их число настраивается динамически между
минимальным и максимальным значением. Этот параметр задаёт минимальное число.
## max_flusher_count
- Тип: целое число
- Значение по умолчанию: 256
Максимальное число микро-потоков очистки журнала (см. выше min_flusher_count).
## inmemory_metadata
- Тип: булево (да/нет)
- Значение по умолчанию: true
Данный параметр заставляет Vitastor всегда держать область метаданных диска
в памяти. Это нужно, чтобы избегать дополнительных операций чтения с диска
при записи. Размер области метаданных на данный момент составляет примерно
224 МБ на 1 ТБ данных. При включении потребление памяти снизится примерно
на эту величину, но при этом также снизится и производительность. В будущем,
после обновления схемы хранения метаданных, это ограничение, скорее всего,
будет ликвидировано.
## inmemory_journal
- Тип: булево (да/нет)
- Значение по умолчанию: true
Данный параметр заставляет Vitastor всегда держать в памяти журналы OSD.
Отключение параметра, опять же, снижает потребление памяти, но ухудшает
производительность, так как для копирования данных из журнала в основную
область устройства OSD будут вынуждены читать их обратно с диска. Выигрыш
по памяти при этом обычно крайне низкий, так как для SSD OSD обычно
достаточно 16- или 32-мегабайтного журнала. Однако в теории отключение
параметра может оказаться полезным для гибридных OSD (HDD+SSD) с большими
журналами, расположенными на быстром по сравнению с HDD устройстве.
## journal_sector_buffer_count
- Тип: целое число
- Значение по умолчанию: 32
Максимальное число буферов, разрешённых для использования под записываемые
в журнал блоки метаданных. Единственная ситуация, в которой этот параметр
нужно менять - это если вы включаете journal_no_same_sector_overwrites. В
этом случае установите данный параметр, например, в 1024.
## journal_no_same_sector_overwrites
- Тип: булево (да/нет)
- Значение по умолчанию: false
Включайте данную опцию для SSD вроде Intel D3-S4510 и D3-S4610, которые
ОЧЕНЬ не любят, когда ПО перезаписывает один и тот же сектор несколько раз
подряд. Такие SSD при многократной перезаписи одного и того же сектора
сильно замедляются - условно, с 25000 и более iops до 3000 iops. Когда
данная опция установлена, Vitastor всегда переходит к следующему сектору
журнала после записи вместо потенциально повторной перезаписи того же
самого сектора.
Почти все другие SSD (99% моделей) не требуют данной опции.
## throttle_small_writes
- Тип: булево (да/нет)
- Значение по умолчанию: false
Разрешить мягкое ограничение скорости журналируемой записи. Полезно для
гибридных OSD с быстрыми устройствами метаданных и медленными устройствами
данных. Идея заключается в том, что мелкие записи в этой ситуации могут
завершаться очень быстро, так как они изначально записываются на быстрое
журнальное устройство (SSD). Но перемещать их потом на основное медленное
устройство долго. Поэтому если OSD быстро примет от клиентов очень много
мелких операций записи, он быстро заполнит свой журнал, после чего
производительность записи резко упадёт практически до нуля. Ограничение
скорости записи призвано решить эту проблему с помощью искусственного
замедления операций записи на основании объёма свободного места в журнале.
Когда эта опция включена, производительность мелких операций записи будет
снижаться плавно, а не резко в момент окончательного заполнения журнала.
## throttle_target_iops
- Тип: целое число
- Значение по умолчанию: 100
Расчётное максимальное число ограничиваемых операций в секунду при условии
отсутствия свободного места в журнале. Устанавливайте приблизительно равным
максимальной производительности случайной записи ваших устройств данных
(HDD) в операциях в секунду.
## throttle_target_mbs
- Тип: целое число
- Значение по умолчанию: 100
Расчётный максимальный размер в МБ/с ограничиваемых операций в секунду при
условии отсутствия свободного места в журнале. Устанавливайте приблизительно
равным максимальной производительности линейной записи ваших устройств
данных (HDD).
## throttle_target_parallelism
- Тип: целое число
- Значение по умолчанию: 1
Расчётный максимальный параллелизм ограничиваемых операций в секунду при
условии отсутствия свободного места в журнале. Устанавливайте приблизительно
равным внутреннему параллелизму ваших устройств данных (1 для HDD, 4-8
для SSD).
## throttle_threshold_us
- Тип: микросекунды
- Значение по умолчанию: 50
Минимальная применимая к ограничиваемым операциям задержка. Обычно не
требует изменений.
## osd_memlock
- Тип: булево (да/нет)
- Значение по умолчанию: false
Блокировать всю память OSD с помощью mlockall, чтобы запретить её выгрузку в пространство подкачки. Требует достаточного значения ulimit -l (лимита заблокированной памяти).

254
docs/config/pool.en.md Normal file
View File

@ -0,0 +1,254 @@
[Documentation](../../README.md#documentation) → [Configuration](../config.en.md) → Pool configuration
-----
[Читать на русском](pool.ru.md)
# Pool configuration
Pool configuration is set in etcd key `/vitastor/config/pools` in the following
JSON format:
```
{
"<Numeric ID>": {
"name": "<name>",
...other parameters...
}
}
```
Pool configuration is also affected by:
- [OSD Placement Tree](#placement-tree)
- [Separate OSD settings](#osd-settings)
Parameters:
- [name](#name)
- [scheme](#scheme)
- [pg_size](#pg_size)
- [parity_chunks](#parity_chunks)
- [pg_minsize](#pg_minsize)
- [pg_count](#pg_count)
- [failure_domain](#failure_domain)
- [max_osd_combinations](#max_osd_combinations)
- [pg_stripe_size](#pg_stripe_size)
- [root_node](#root_node)
- [osd_tags](#osd_tags)
- [primary_affinity_tags](#primary_affinity_tags)
Examples:
- [Replicated Pool](#replicated-pool)
- [Erasure-coded Pool](#erasure-coded-pool)
# Placement Tree
OSD placement tree is set in a separate etcd key `/vitastor/config/node_placement`
in the following JSON format:
`
{
"<node name or OSD number>": {
"level": "<level>",
"parent": "<parent node name, if any>"
},
...
}
`
Here, if a node name is a number then it is assumed to refer to an OSD.
Level of the OSD is always "osd" and cannot be overriden. You may only
override parent node of the OSD which is its host by default.
Non-numeric node names refer to other placement tree nodes like hosts, racks,
datacenters and so on.
Hosts of all OSDs are auto-created in the tree with level "host" and name
equal to the host name reported by a corresponding OSD. You can refer to them
without adding them to this JSON tree manually.
Level may be "host", "osd" or refer to some other placement tree level
from [placement_levels](monitor.en.md#placement_levels).
Parent node reference is required for intermediate tree nodes.
# OSD settings
Separate OSD settings are set in etc keys `/vitastor/config/osd/<number>`
in JSON format `{"<key>":<value>}`.
As of now, there is only one setting:
## reweight
- Type: number, between 0 and 1
- Default: 1
Every OSD receives PGs proportional to its size. Reweight is a multiplier for
OSD size used during PG distribution.
This means an OSD configured with reweight lower than 1 receives less PGs than
it normally would. An OSD with reweight = 0 won't store any data. You can set
reweight to 0 to trigger rebalance and remove all data from an OSD.
# Pool parameters
## name
- Type: string
- Required
Pool name.
## scheme
- Type: string
- Required
- One of: "replicated", "xor" or "jerasure"
Redundancy scheme used for data in this pool.
## pg_size
- Type: integer
- Required
Total number of disks for PGs of this pool - i.e., number of replicas for
replicated pools and number of data plus parity disks for EC/XOR pools.
## parity_chunks
- Type: integer
Number of parity chunks for EC/XOR pools. For such pools, data will be lost
if you lose more than parity_chunks disks at once, so this parameter can be
equally described as FTT (number of failures to tolerate).
Required for EC/XOR pools, ignored for replicated pools.
## pg_minsize
- Type: integer
- Required
Number of available live disks for PGs of this pool to remain active.
That is, if it becomes impossible to place PG data on at least (pg_minsize)
OSDs, PG is deactivated for both read and write. So you know that a fresh
write always goes to at least (pg_minsize) OSDs (disks).
FIXME: pg_minsize behaviour may be changed in the future to only make PGs
read-only instead of deactivating them.
## pg_count
- Type: integer
- Required
Number of PGs for this pool. The value should be big enough for the monitor /
LP solver to be able to optimize data placement.
"Enough" is usually around 64-128 PGs per OSD, i.e. you set pg_count for pool
to (total OSD count * 100 / pg_size). You can round it to the closest power of 2,
because it makes it easier to reduce or increase PG count later by dividing or
multiplying it by 2.
In Vitastor, PGs are ephemeral, so you can change pool PG count anytime just
by overwriting pool configuration in etcd. Amount of the data affected by
rebalance will be smaller if the new PG count is a multiple of the old PG count
or vice versa.
## failure_domain
- Type: string
- Default: host
Failure domain specification. Must be "host" or "osd" or refer to one of the
placement tree levels, defined in [placement_levels](monitor.en.md#placement_levels).
Two replicas, or two parts in case of EC/XOR, of the same block of data are
never put on OSDs in the same failure domain (for example, on the same host).
So failure domain specifies the unit which failure you are protecting yourself
from.
## max_osd_combinations
- Type: integer
- Default: 10000
Vitastor data placement algorithm is based on the LP solver and OSD combinations
which are fed to it are generated ramdonly. This parameter specifies the maximum
number of combinations to generate when optimising PG placement.
This parameter usually doesn't require to be changed.
## pg_stripe_size
- Type: integer
- Default: 0
Specifies the stripe size for this pool according to which images are split into
different PGs. Stripe size can't be smaller than [block_size](layout-cluster.en.md#block_size)
multiplied by (pg_size - parity_chunks) for EC/XOR pools, or 1 for replicated pools,
and the same value is used by default.
This means first `pg_stripe_size = (block_size * (pg_size-parity_chunks))` bytes
of an image go to one PG, next `pg_stripe_size` bytes go to another PG and so on.
Usually doesn't require to be changed separately from the block size.
## root_node
- Type: string
Specifies the root node of the OSD tree to restrict this pool OSDs to.
Referenced root node must exist in /vitastor/config/node_placement.
## osd_tags
- Type: string or array of strings
Specifies OSD tags to restrict this pool to. If multiple tags are specified,
only OSDs having all of these tags will be used for this pool.
## primary_affinity_tags
- Type: string or array of strings
Specifies OSD tags to prefer putting primary OSDs in this pool to.
Note that for EC/XOR pools Vitastor always prefers to put primary OSD on one
of the OSDs containing a data chunk for a PG.
# Examples
## Replicated pool
```
{
"1": {
"name":"testpool",
"scheme":"replicated",
"pg_size":2,
"pg_minsize":1,
"pg_count":256,
"failure_domain":"host"
}
}
```
## Erasure-coded pool
```
{
"2": {
"name":"ecpool",
"scheme":"jerasure",
"pg_size":3,
"parity_chunks":1,
"pg_minsize":2,
"pg_count":256,
"failure_domain":"host"
}
}
```

253
docs/config/pool.ru.md Normal file
View File

@ -0,0 +1,253 @@
[Документация](../../README-ru.md#документация) → [Конфигурация](../config.ru.md) → Конфигурация пулов
-----
[Read in English](pool.en.md)
# Конфигурация пулов
Настройки пулов задаются в ключе etcd `/vitastor/config/pools` в JSON-формате:
```
{
"<Численный ID>": {
"name": "<имя>",
...остальные параметры...
}
}
```
На настройку пулов также влияют:
- [Дерево размещения OSD](#дерево-размещения)
- [Настройки отдельных OSD](#настройки-osd)
Параметры:
- [name](#name)
- [scheme](#scheme)
- [pg_size](#pg_size)
- [parity_chunks](#parity_chunks)
- [pg_minsize](#pg_minsize)
- [pg_count](#pg_count)
- [failure_domain](#failure_domain)
- [max_osd_combinations](#max_osd_combinations)
- [pg_stripe_size](#pg_stripe_size)
- [root_node](#root_node)
- [osd_tags](#osd_tags)
- [primary_affinity_tags](#primary_affinity_tags)
Примеры:
- [Реплицированный пул](#реплицированный-пул)
- [Пул с кодами коррекции ошибок 2+1](#пул-с-кодами-коррекции-ошибок)
# Дерево размещения
Дерево размещения OSD задаётся в отдельном ключе etcd `/vitastor/config/node_placement`
в следующем JSON-формате:
`
{
"<имя узла или номер OSD>": {
"level": "<уровень>",
"parent": "<имя родительского узла, если есть>"
},
...
}
`
Здесь, если название узла - число, считается, что это OSD. Уровень OSD
всегда равен "osd" и не может быть переопределён. Для OSD вы можете только
переопределить родительский узел. По умолчанию родителем OSD считается его хост.
Нечисловые имена узлов относятся к другим узлам дерева OSD, таким, как хосты (серверы),
стойки, датацентры и так далее.
Хосты всех OSD автоматически создаются в дереве с уровнем "host" и именем, равным имени хоста,
сообщаемым соответствующим OSD. Вы можете ссылаться на эти хосты, не заводя их
в дереве вручную.
Уровень может быть "host", "osd" или относиться к другому уровню размещения из
[placement_levels](monitor.ru.md#placement_levels).
Родительский узел нужен только для промежуточных узлов дерева.
# Настройки OSD
Настройки отдельных OSD задаются в ключах etcd `/vitastor/config/osd/<number>`
в JSON-формате `{"<key>":<value>}`.
На данный момент поддерживается одна настройка:
## reweight
- Тип: число, от 0 до 1
- По умолчанию: 1
Каждый OSD получает число PG, пропорциональное его размеру. Reweight - это
множитель для размера, используемый в процессе распределения PG.
Это значит, что OSD, сконфигурированный с reweight меньше 1 будет получать
меньше PG, чем обычно. OSD с reweight, равным 0, не будет участвовать в
хранении данных вообще. Вы можете установить reweight в 0, чтобы убрать
все данные с OSD.
# Параметры
## name
- Тип: строка
- Обязательный
Название пула.
## scheme
- Тип: строка
- Обязательный
- Возможные значения: "replicated", "xor" или "jerasure"
Схема избыточности, используемая в данном пуле.
## pg_size
- Тип: целое число
- Обязательный
Размер PG данного пула, т.е. число реплик для реплицированных пулов или
число дисков данных плюс дисков чётности для пулов EC/XOR.
## parity_chunks
- Тип: целое число
Число дисков чётности для EC/XOR пулов. Иными словами, число дисков, при
одновременной потере которых данные будут потеряны.
Игнорируется для реплицированных пулов, обязательно для EC/XOR.
## pg_minsize
- Тип: целое число
- Обязательный
Число доступных дисков для PG данного пула, при котором PG остаются активны.
Если становится невозможно размещать новые данные в PG как минимум на pg_minsize
OSD, PG деактивируется на чтение и запись. Иными словами, всегда известно,
что новые блоки данных всегда записываются как минимум на pg_minsize дисков.
FIXME: Поведение pg_minsize может быть изменено в будущем с полной деактивации
PG на перевод их в режим только для чтения.
## pg_count
- Тип: целое число
- Обязательный
Число PG для данного пула. Число должно быть достаточно большим, чтобы монитор
мог равномерно распределить по ним данные.
Обычно это означает примерно 64-128 PG на 1 OSD, т.е. pg_count можно устанавливать
равным (общему числу OSD * 100 / pg_size). Значение можно округлить до ближайшей
степени 2, чтобы потом было легче уменьшать или увеличивать число PG, умножая
или деля его на 2.
PG в Vitastor эферемерны, то есть вы можете менять их число в любой момент,
просто перезаписывая конфигурацию пулов в etcd. Однако объём перемещения данных
при этом будет минимален, если новое число PG кратно старому (или наоборот).
## failure_domain
- Тип: строка
- По умолчанию: host
Домен отказа для пула. Может быть равен "host" или "osd" или любому другому
уровню дерева OSD, задаваемому в настройке [placement_levels](monitor.ru.md#placement_levels).
Смысл домена отказа в том, что 2 копии, или 2 части одного блока данных в случае
кодов коррекции ошибок, никогда не помещаются на OSD, принадлежащие одному домену отказа.
Иными словами, домен отказа - это то, от отказа чего вы защищаете себя избыточным
хранением.
## max_osd_combinations
- Тип: целое число
- По умолчанию: 10000
Алгоритм распределения данных Vitastor основан на решателе задачи линейного
программирования. При этом для снижения сложности задачи возможные комбинации OSD
генерируются случайно и ограничиваются количеством, равным значению этого параметра.
Обычно данный параметр не требует изменений.
## pg_stripe_size
- Тип: целое число
- По умолчанию: 0
Данный параметр задаёт размер полосы "нарезки" образов на PG. Размер полосы не может
быть меньше, чем [block_size](layout-cluster.ru.md#block_size), умноженный на
(pg_size - parity_chunks) для EC-пулов или 1 для реплицированных пулов. То же
значение используется по умолчанию.
Это означает, что по умолчанию первые `pg_stripe_size = (block_size * (pg_size-parity_chunks))` байт
образа помещаются в одну PG, следующие `pg_stripe_size` байт помещаются в другую
и т.п.
Данный параметр обычно тоже не требует изменений.
## root_node
- Тип: строка
Корневой узел дерева OSD для ограничения OSD, выбираемых для пула. Задаваемый
узел должен быть предварительно задан в /vitastor/config/node_placement.
## osd_tags
- Тип: строка или массив строк
Теги OSD для ограничения OSD, выбираемых для пула. Если задаётся несколько тегов
массивом, то выбираются только OSD, у которых есть все эти теги.
## primary_affinity_tags
- Тип: строка или массив строк
Теги OSD, по которым должны выбираться OSD, предпочитаемые в качестве первичных
для PG этого пула. Имейте в виду, что для EC-пулов Vitastor также всегда
предпочитает помещать первичный OSD на один из OSD с данными, а не с чётностью.
# Примеры
## Реплицированный пул
```
{
"1": {
"name":"testpool",
"scheme":"replicated",
"pg_size":2,
"pg_minsize":1,
"pg_count":256,
"failure_domain":"host"
}
}
```
## Пул с кодами коррекции ошибок
```
{
"2": {
"name":"ecpool",
"scheme":"jerasure",
"pg_size":3,
"parity_chunks":1,
"pg_minsize":2,
"pg_count":256,
"failure_domain":"host"
}
}
```

View File

@ -0,0 +1,3 @@
# Common Parameters
These are the most common parameters which apply to all components of Vitastor.

View File

@ -0,0 +1,3 @@
# Общие параметры
Это наиболее общие параметры, используемые всеми компонентами Vitastor.

View File

@ -0,0 +1,35 @@
- name: config_path
type: string
default: "/etc/vitastor/vitastor.conf"
info: |
Path to the JSON configuration file. Configuration file is optional,
a non-existing configuration file does not prevent Vitastor from
running if required parameters are specified.
info_ru: |
Путь к файлу конфигурации в формате JSON. Файл конфигурации необязателен,
без него Vitastor тоже будет работать, если переданы необходимые параметры.
- name: etcd_address
type: string or array of strings
type_ru: строка или массив строк
info: |
etcd connection endpoint(s). Multiple endpoints may be delimited by "," or
specified in a JSON array `["10.0.115.10:2379/v3","10.0.115.11:2379/v3"]`.
Note that https is not supported for etcd connections yet.
info_ru: |
Адрес(а) подключения к etcd. Несколько адресов могут разделяться запятой
или указываться в виде JSON-массива `["10.0.115.10:2379/v3","10.0.115.11:2379/v3"]`.
- name: etcd_prefix
type: string
default: "/vitastor"
info: |
Prefix for all keys in etcd used by Vitastor. You can change prefix and, for
example, use a single etcd cluster for multiple Vitastor clusters.
info_ru: |
Префикс для ключей etcd, которые использует Vitastor. Вы можете задать другой
префикс, например, чтобы запустить несколько кластеров Vitastor с одним
кластером etcd.
- name: log_level
type: int
default: 0
info: Log level. Raise if you want more verbose output.
info_ru: Уровень логгирования. Повысьте, если хотите более подробный вывод.

View File

@ -0,0 +1,4 @@
# Cluster-Wide Disk Layout Parameters
These parameters apply to clients and OSDs, are fixed at the moment of OSD drive
initialization and can't be changed after it without losing data.

View File

@ -0,0 +1,4 @@
# Дисковые параметры уровня кластера
Данные параметры используются клиентами и OSD, задаются в момент инициализации
диска OSD и не могут быть изменены после этого без потери данных.

View File

@ -0,0 +1,200 @@
- name: block_size
type: int
default: 131072
info: |
Size of objects (data blocks) into which all physical and virtual drives are
subdivided in Vitastor. One of current main settings in Vitastor, affects
memory usage, write amplification and I/O load distribution effectiveness.
Recommended default block size is 128 KB for SSD and 4 MB for HDD. In fact,
it's possible to use 4 MB for SSD too - it will lower memory usage, but
may increase average WA and reduce linear performance.
OSDs with different block sizes (for example, SSD and SSD+HDD OSDs) can
currently coexist in one etcd instance only within separate Vitastor
clusters with different etcd_prefix'es.
Also block size can't be changed after OSD initialization without losing
data.
You must always specify block_size in etcd in /vitastor/config/global if
you change it so all clients can know about it.
OSD memory usage is roughly (SIZE / BLOCK * 68 bytes) which is roughly
544 MB per 1 TB of used disk space with the default 128 KB block size.
info_ru: |
Размер объектов (блоков данных), на которые делятся физические и виртуальные
диски в Vitastor. Одна из ключевых на данный момент настроек, влияет на
потребление памяти, объём избыточной записи (write amplification) и
эффективность распределения нагрузки по OSD.
Рекомендуемые по умолчанию размеры блока - 128 килобайт для SSD и 4
мегабайта для HDD. В принципе, для SSD можно тоже использовать 4 мегабайта,
это понизит использование памяти, но ухудшит распределение нагрузки и в
среднем увеличит WA.
OSD с разными размерами блока (например, SSD и SSD+HDD OSD) на данный
момент могут сосуществовать в рамках одного etcd только в виде двух независимых
кластеров Vitastor с разными etcd_prefix.
Также размер блока нельзя менять после инициализации OSD без потери данных.
Если вы меняете размер блока, обязательно прописывайте его в etcd в
/vitastor/config/global, дабы все клиенты его знали.
Потребление памяти OSD составляет примерно (РАЗМЕР / БЛОК * 68 байт),
т.е. примерно 544 МБ памяти на 1 ТБ занятого места на диске при
стандартном 128 КБ блоке.
- name: bitmap_granularity
type: int
default: 4096
info: |
Required virtual disk write alignment ("sector size"). Must be a multiple
of disk_alignment. It's called bitmap granularity because Vitastor tracks
an allocation bitmap for each object containing 2 bits per each
(bitmap_granularity) bytes.
This parameter can't be changed after OSD initialization without losing
data. Also it's fixed for the whole Vitastor cluster i.e. two different
values can't be used in a single Vitastor cluster.
Clients MUST be aware of this parameter value, so put it into etcd key
/vitastor/config/global if you change it for any reason.
info_ru: |
Требуемое выравнивание записи на виртуальные диски (размер их "сектора").
Должен быть кратен disk_alignment. Называется гранулярностью битовой карты
потому, что Vitastor хранит битовую карту для каждого объекта, содержащую
по 2 бита на каждые (bitmap_granularity) байт.
Данный параметр нельзя менять после инициализации OSD без потери данных.
Также он фиксирован для всего кластера Vitastor, т.е. разные значения
не могут сосуществовать в одном кластере.
Клиенты ДОЛЖНЫ знать правильное значение этого параметра, так что если вы
его меняете, обязательно прописывайте изменённое значение в etcd в ключ
/vitastor/config/global.
- name: immediate_commit
type: string
default: false
info: |
Another parameter which is really important for performance.
Desktop SSDs are very fast (100000+ iops) for simple random writes
without cache flush. However, they are really slow (only around 1000 iops)
if you try to fsync() each write, that is, when you want to guarantee that
each change gets immediately persisted to the physical media.
Server-grade SSDs with "Advanced/Enhanced Power Loss Protection" or with
"Supercapacitor-based Power Loss Protection", on the other hand, are equally
fast with and without fsync because their cache is protected from sudden
power loss by a built-in supercapacitor-based "UPS".
Some software-defined storage systems always fsync each write and thus are
really slow when used with desktop SSDs. Vitastor, however, can also
efficiently utilize desktop SSDs by postponing fsync until the client calls
it explicitly.
This is what this parameter regulates. When it's set to "all" the whole
Vitastor cluster commits each change to disks immediately and clients just
ignore fsyncs because they know for sure that they're unneeded. This reduces
the amount of network roundtrips performed by clients and improves
performance. So it's always better to use server grade SSDs with
supercapacitors even with Vitastor, especially given that they cost only
a bit more than desktop models.
There is also a common SATA SSD (and HDD too!) firmware bug (or feature)
that makes server SSDs which have supercapacitors slow with fsync. To check
if your SSDs are affected, compare benchmark results from `fio -name=test
-ioengine=libaio -direct=1 -bs=4k -rw=randwrite -iodepth=1` with and without
`-fsync=1`. Results should be the same. If fsync=1 result is worse you can
try to work around this bug by "disabling" drive write-back cache by running
`hdparm -W 0 /dev/sdXX` or `echo write through > /sys/block/sdXX/device/scsi_disk/*/cache_type`
(IMPORTANT: don't mistake it with `/sys/block/sdXX/queue/write_cache` - it's
unsafe to change by hand). The same may apply to newer HDDs with internal
SSD cache or "media-cache" - for example, a lot of Seagate EXOS drives have
it (they have internal SSD cache even though it's not stated in datasheets).
This parameter must be set both in etcd in /vitastor/config/global and in
OSD command line or configuration. Setting it to "all" or "small" requires
enabling disable_journal_fsync and disable_meta_fsync, setting it to "all"
also requires enabling disable_data_fsync.
TLDR: For optimal performance, set immediate_commit to "all" if you only use
SSDs with supercapacitor-based power loss protection (nonvolatile
write-through cache) for both data and journals in the whole Vitastor
cluster. Set it to "small" if you only use such SSDs for journals. Leave
empty if your drives have write-back cache.
info_ru: |
Ещё один важный для производительности параметр.
Модели SSD для настольных компьютеров очень быстрые (100000+ операций в
секунду) при простой случайной записи без сбросов кэша. Однако они очень
медленные (всего порядка 1000 iops), если вы пытаетесь сбрасывать кэш после
каждой записи, то есть, если вы пытаетесь гарантировать, что каждое
изменение физически записывается в энергонезависимую память.
С другой стороны, серверные SSD с конденсаторами - функцией, называемой
"Advanced/Enhanced Power Loss Protection" или просто "Supercapacitor-based
Power Loss Protection" - одинаково быстрые и со сбросом кэша, и без
него, потому что их кэш защищён от потери питания встроенным "источником
бесперебойного питания" на основе суперконденсаторов и на самом деле они
его никогда не сбрасывают.
Некоторые программные СХД всегда сбрасывают кэши дисков при каждой записи
и поэтому работают очень медленно с настольными SSD. Vitastor, однако, может
откладывать fsync до явного его вызова со стороны клиента и таким образом
эффективно утилизировать настольные SSD.
Данный параметр влияет как раз на это. Когда он установлен в значение "all",
весь кластер Vitastor мгновенно фиксирует каждое изменение на физические
носители и клиенты могут просто игнорировать запросы fsync, т.к. они точно
знают, что fsync-и не нужны. Это уменьшает число необходимых обращений к OSD
по сети и улучшает производительность. Поэтому даже с Vitastor лучше всегда
использовать только серверные модели SSD с суперконденсаторами, особенно
учитывая то, что стоят они ненамного дороже настольных.
Также в прошивках SATA SSD (и даже HDD!) очень часто встречается либо баг,
либо просто особенность логики, из-за которой серверные SSD, имеющие
конденсаторы и защиту от потери питания, всё равно медленно работают с
fsync. Чтобы понять, подвержены ли этой проблеме ваши SSD, сравните
результаты тестов `fio -name=test -ioengine=libaio -direct=1 -bs=4k
-rw=randwrite -iodepth=1` без и с опцией `-fsync=1`. Результаты должны
быть одинаковые. Если результат с `fsync=1` хуже, вы можете попробовать
обойти проблему, "отключив" кэш записи диска командой `hdparm -W 0 /dev/sdXX`
либо `echo write through > /sys/block/sdXX/device/scsi_disk/*/cache_type`
(ВАЖНО: не перепутайте с `/sys/block/sdXX/queue/write_cache` - этот параметр
менять руками небезопасно). Такая же проблема может встречаться и в новых
HDD-дисках с внутренним SSD или "медиа" кэшем - например, она встречается во
многих дисках Seagate EXOS (у них есть внутренний SSD-кэш, хотя это и не
указано в спецификациях).
Данный параметр нужно указывать и в etcd в /vitastor/config/global, и в
командной строке или конфигурации OSD. Значения "all" и "small" требуют
включения disable_journal_fsync и disable_meta_fsync, значение "all" также
требует включения disable_data_fsync.
Итого, вкратце: для оптимальной производительности установите
immediate_commit в значение "all", если вы используете в кластере только SSD
с суперконденсаторами и для данных, и для журналов. Если вы используете
такие SSD для всех журналов, но не для данных - можете установить параметр
в "small". Если и какие-то из дисков журналов имеют волатильный кэш записи -
оставьте параметр пустым.
- name: client_dirty_limit
type: int
default: 33554432
info: |
Without immediate_commit=all this parameter sets the limit of "dirty"
(not committed by fsync) data allowed by the client before forcing an
additional fsync and committing the data. Also note that the client always
holds a copy of uncommitted data in memory so this setting also affects
RAM usage of clients.
This parameter doesn't affect OSDs themselves.
info_ru: |
При работе без immediate_commit=all - это лимит объёма "грязных" (не
зафиксированных fsync-ом) данных, при достижении которого клиент будет
принудительно вызывать fsync и фиксировать данные. Также стоит иметь в виду,
что в этом случае до момента fsync клиент хранит копию незафиксированных
данных в памяти, то есть, настройка влияет на потребление памяти клиентами.
Параметр не влияет на сами OSD.

View File

@ -0,0 +1,4 @@
# OSD Disk Layout Parameters
These parameters apply to OSDs, are fixed at the moment of OSD drive
initialization and can't be changed after it without losing data.

View File

@ -0,0 +1,5 @@
# Дисковые параметры OSD
Данные параметры используются только OSD и, также как и общекластерные
дисковые параметры, задаются в момент инициализации дисков OSD и не могут быть
изменены после этого без потери данных.

View File

@ -0,0 +1,206 @@
- name: data_device
type: string
info: |
Path to the block device to use for data. It's highly recommendded to use
stable paths for all device names: `/dev/disk/by-partuuid/xxx...` instead
of just `/dev/sda` or `/dev/nvme0n1` to not mess up after server restart.
Files can also be used instead of block devices, but this is implemented
only for testing purposes and not for production.
info_ru: |
Путь к диску (блочному устройству) для хранения данных. Крайне рекомендуется
использовать стабильные пути: `/dev/disk/by-partuuid/xxx...` вместо простых
`/dev/sda` или `/dev/nvme0n1`, чтобы пути не могли спутаться после
перезагрузки сервера. Также вместо блочных устройств можно указывать файлы,
но это реализовано только для тестирования, а не для боевой среды.
- name: meta_device
type: string
info: |
Path to the block device to use for the metadata. Metadata must be on a fast
SSD or performance will suffer. If this option is skipped, `data_device` is
used for the metadata.
info_ru: |
Путь к диску метаданных. Метаданные должны располагаться на быстром
SSD-диске, иначе производительность пострадает. Если эта опция не указана,
для метаданных используется `data_device`.
- name: journal_device
type: string
info: |
Path to the block device to use for the journal. Journal must be on a fast
SSD or performance will suffer. If this option is skipped, `meta_device` is
used for the journal, and if it's also empty, journal is put on
`data_device`. It's almost always fine to put metadata and journal on the
same device, in this case you only need to set `meta_device`.
info_ru: |
Путь к диску журнала. Журнал должен располагаться на быстром SSD-диске,
иначе производительность пострадает. Если эта опция не указана,
для журнала используется `meta_device`, если же пуста и она, журнал
располагается на `data_device`. Нормально располагать журнал и метаданные
на одном устройстве, в этом случае достаточно указать только `meta_device`.
- name: journal_offset
type: int
default: 0
info: Offset on the device in bytes where the journal is stored.
info_ru: Смещение на устройстве в байтах, по которому располагается журнал.
- name: journal_size
type: int
info: |
Journal size in bytes. By default, all available space between journal_offset
and data_offset, meta_offset or the end of the journal device is used.
Large journals aren't needed in SSD-only setups, 32 MB is always enough.
In SSD+HDD setups it is beneficial to use larger journals (for example, 1 GB)
and enable [throttle_small_writes](osd.en.md#throttle_small_writes).
info_ru: |
Размер журнала в байтах. По умолчанию для журнала используется всё доступное
место между journal_offset и data_offset, meta_offset или концом диска.
В SSD-кластерах большие журналы не нужны, достаточно 32 МБ. В гибридных
(SSD+HDD) кластерах осмысленно использовать больший размер журнал (например, 1 ГБ)
и включить [throttle_small_writes](osd.ru.md#throttle_small_writes).
- name: meta_offset
type: int
default: 0
info: |
Offset on the device in bytes where the metadata area is stored.
Again, set it to something if you colocate metadata with journal or data.
info_ru: |
Смещение на устройстве в байтах, по которому располагаются метаданные.
Эту опцию нужно задать, если метаданные у вас хранятся на том же
устройстве, что данные или журнал.
- name: data_offset
type: int
default: 0
info: |
Offset on the device in bytes where the data area is stored.
Again, set it to something if you colocate data with journal or metadata.
info_ru: |
Смещение на устройстве в байтах, по которому располагаются данные.
Эту опцию нужно задать, если данные у вас хранятся на том же
устройстве, что метаданные или журнал.
- name: data_size
type: int
info: |
Data area size in bytes. By default, the whole data device up to the end
will be used for the data area, but you can restrict it if you want to use
a smaller part. Note that there is no option to set metadata area size -
it's derived from the data area size.
info_ru: |
Размер области данных в байтах. По умолчанию под данные будет использована
вся доступная область устройства данных до конца устройства, но вы можете
использовать эту опцию, чтобы ограничить её меньшим размером. Заметьте, что
опции размера области метаданных нет - она вычисляется из размера области
данных автоматически.
- name: meta_block_size
type: int
default: 4096
info: |
Physical block size of the metadata device. 4096 for most current
HDDs and SSDs.
info_ru: |
Размер физического блока устройства метаданных. 4096 для большинства
современных SSD и HDD.
- name: journal_block_size
type: int
default: 4096
info: |
Physical block size of the journal device. Must be a multiple of
`disk_alignment`. 4096 for most current HDDs and SSDs.
info_ru: |
Размер физического блока устройства журнала. Должен быть кратен
`disk_alignment`. 4096 для большинства современных SSD и HDD.
- name: disable_data_fsync
type: bool
default: false
info: |
Do not issue fsyncs to the data device, i.e. do not flush its cache.
Safe ONLY if your data device has write-through cache. If you disable
the cache yourself using `hdparm` or `scsi_disk/cache_type` then make sure
that the cache disable command is run every time before starting Vitastor
OSD, for example, in the systemd unit. See also `immediate_commit` option
for the instructions to disable cache and how to benefit from it.
info_ru: |
Не отправлять fsync-и устройству данных, т.е. не сбрасывать его кэш.
Безопасно, ТОЛЬКО если ваше устройство данных имеет кэш со сквозной
записью (write-through). Если вы отключаете кэш через `hdparm` или
`scsi_disk/cache_type`, то удостоверьтесь, что команда отключения кэша
выполняется перед каждым запуском Vitastor OSD, например, в systemd unit-е.
Смотрите также опцию `immediate_commit` для инструкций по отключению кэша
и о том, как из этого извлечь выгоду.
- name: disable_meta_fsync
type: bool
default: false
info: |
Same as disable_data_fsync, but for the metadata device. If the metadata
device is not set or if the data device is used for the metadata the option
is ignored and disable_data_fsync value is used instead of it.
info_ru: |
То же, что disable_data_fsync, но для устройства метаданных. Если устройство
метаданных не задано или если оно равно устройству данных, значение опции
игнорируется и вместо него используется значение опции disable_data_fsync.
- name: disable_journal_fsync
type: bool
default: false
info: |
Same as disable_data_fsync, but for the journal device. If the journal
device is not set or if the metadata device is used for the journal the
option is ignored and disable_meta_fsync value is used instead of it. If
the same device is used for data, metadata and journal the option is also
ignored and disable_data_fsync value is used instead of it.
info_ru: |
То же, что disable_data_fsync, но для устройства журнала. Если устройство
журнала не задано или если оно равно устройству метаданных, значение опции
игнорируется и вместо него используется значение опции disable_meta_fsync.
Если одно и то же устройство используется и под данные, и под журнал, и под
метаданные - значение опции также игнорируется и вместо него используется
значение опции disable_data_fsync.
- name: disable_device_lock
type: bool
default: false
info: |
Do not lock data, metadata and journal block devices exclusively with
flock(). Though it's not recommended, but you can use it you want to run
multiple OSD with a single device and different offsets, without using
partitions.
info_ru: |
Не блокировать устройства данных, метаданных и журнала от открытия их
другими OSD с помощью flock(). Так делать не рекомендуется, но теоретически
вы можете это использовать, чтобы запускать несколько OSD на одном
устройстве с разными смещениями и без использования разделов.
- name: disk_alignment
type: int
default: 4096
info: |
Required physical disk write alignment. Most current SSD and HDD drives
use 4 KB physical sectors even if they report 512 byte logical sector
size, so 4 KB is a good default setting.
Note, however, that physical sector size also affects WA, because with block
devices it's impossible to write anything smaller than a block. So, when
Vitastor has to write a single metadata entry that's only about 32 bytes in
size, it actually has to write the whole 4 KB sector.
Because of this it can actually be beneficial to use SSDs which work well
with 512 byte sectors and use 512 byte disk_alignment, journal_block_size
and meta_block_size. But the only SSD that may fit into this category is
Intel Optane (probably, not tested yet).
Clients don't need to be aware of disk_alignment, so it's not required to
put a modified value into etcd key /vitastor/config/global.
info_ru: |
Требуемое выравнивание записи на физические диски. Почти все современные
SSD и HDD диски используют 4 КБ физические секторы, даже если показывают
логический размер сектора 512 байт, поэтому 4 КБ - хорошее значение по
умолчанию.
Однако стоит понимать, что физический размер сектора тоже влияет на
избыточную запись (WA), потому что ничего меньше блока (сектора) на блочное
устройство записать невозможно. Таким образом, когда Vitastor-у нужно
записать на диск всего лишь одну 32-байтную запись метаданных, фактически
приходится перезаписывать 4 КБ сектор целиком.
Поэтому, на самом деле, может быть выгодно найти SSD, хорошо работающие с
меньшими, 512-байтными, блоками и использовать 512-байтные disk_alignment,
journal_block_size и meta_block_size. Однако единственные SSD, которые
теоретически могут попасть в эту категорию - это Intel Optane (но и это
пока не проверялось автором).
Клиентам не обязательно знать про disk_alignment, так что помещать значение
этого параметра в etcd в /vitastor/config/global не нужно.

120
docs/config/src/make.js Executable file
View File

@ -0,0 +1,120 @@
#!/usr/bin/nodejs
const fs = require('fs');
const yaml = require('yaml');
const L = {
en: {
Documentation: 'Documentation',
Configuration: 'Configuration',
Crossref: 'Read in English',
toc_root: '[Documentation](../README.md#documentation)',
toc_intro: 'Introduction',
toc_installation: 'Installation',
toc_config: '[Configuration](../config.en.md)',
toc_usage: 'Usage',
toc_performance: 'Performance',
},
ru: {
Documentation: 'Документация',
Configuration: 'Конфигурация',
Type: 'Тип',
Default: 'Значение по умолчанию',
Minimum: 'Минимальное значение',
Crossref: 'Читать на русском',
toc_root: '[Документация](../README-ru.md#документация)',
toc_intro: 'Введение',
toc_installation: 'Установка',
toc_config: '[Конфигурация](../config.ru.md)',
toc_usage: 'Использование',
toc_performance: 'Производительность',
},
};
const types = {
en: {
string: 'string',
bool: 'boolean',
int: 'integer',
sec: 'seconds',
ms: 'milliseconds',
us: 'microseconds',
},
ru: {
string: 'строка',
bool: 'булево (да/нет)',
int: 'целое число',
sec: 'секунды',
ms: 'миллисекунды',
us: 'микросекунды',
},
};
const params_files = fs.readdirSync(__dirname)
.filter(f => f.substr(-4) == '.yml')
.map(f => f.substr(0, f.length-4));
for (const file of params_files)
{
const cfg = yaml.parse(fs.readFileSync(__dirname+'/'+file+'.yml', { encoding: 'utf-8' }));
for (const lang in types)
{
let out = '\n';
for (const c of cfg)
{
out += `\n- [${c.name}](#${c.name})`;
}
for (const c of cfg)
{
out += `\n\n## ${c.name}\n\n`;
out += `- ${L[lang]['Type'] || 'Type'}: ${c["type_"+lang] || types[lang][c.type] || c.type}\n`;
if (c.default !== undefined)
out += `- ${L[lang]['Default'] || 'Default'}: ${c.default}\n`;
if (c.min !== undefined)
out += `- ${L[lang]['Minimum'] || 'Minimum'}: ${c.min}\n`;
out += `\n`+(c["info_"+lang] || c["info"]).replace(/\s+$/, '');
}
const head = fs.readFileSync(__dirname+'/'+file+'.'+lang+'.md', { encoding: 'utf-8' });
out = head.replace(/\s+$/, '')+out+"\n";
fs.writeFileSync(__dirname+'/../'+file+'.'+lang+'.md', out);
}
}
// Add "Read in..." to all other documentation files
for (const file of find_files(__dirname+'/../..', name => name.substr(-3) == '.md' && !/config\/src\//.exec(name)))
{
const m = /^(?:(.*?)\/)?([^\/]+)\.([^\.]+)\.[^\.]+$/.exec(file);
if (!m)
continue;
const [ , subdir, filename, lang ] = m;
if (!L[lang])
continue;
let text = fs.readFileSync(__dirname+'/../../'+file, { encoding: 'utf-8' });
const title = /(^|\n)# ([^\n]+)/.exec(text)[2];
let read_in = Object.keys(L).filter(other => other != lang)
.map(other => `[${L[other].Crossref}](${filename}.${other}.md)`)
.join(' ')+'\n\n';
read_in = L[lang]['toc_root'].replace(/\.\.\//, subdir ? '../../' : '../')+' → '+
(subdir ? L[lang]['toc_'+subdir]+' → ' : '')+
title+'\n\n-----\n\n'+
read_in;
if (text.substr(0, read_in.length) != read_in)
{
fs.writeFileSync(__dirname+'/../../'+file, read_in + (text[0] == '#' ? text : text.replace(/^([\s\S]*?\n)?#/, '#')));
}
}
function find_files(dir, fn, subdir = '', res = [])
{
for (const ent of fs.readdirSync(dir+'/'+subdir, { withFileTypes: true }))
{
if (ent.isDirectory())
{
find_files(dir, fn, subdir ? subdir+'/'+ent.name : ent.name, res);
}
else if (fn(subdir ? subdir+'/'+ent.name : ent.name, ent))
{
res.push(subdir ? subdir+'/'+ent.name : ent.name);
}
}
return res;
}

View File

@ -0,0 +1,3 @@
# Monitor Parameters
These parameters only apply to Monitors.

Some files were not shown because too many files have changed in this diff Show More