Update cinder driver workaround

Slightly reduces WA. For example, in 4K T1Q128 replicated randwrite tests
WA is reduced from ~3.6 to ~3.1, in T1Q64 from ~3.8 to ~3.4.

Only effective without no_same_sector_overwrites.

CMakeLists.txt

@@ -2,6 +2,6 @@ cmake_minimum_required(VERSION 2.8)
 
 project(vitastor)
 
-set(VERSION "0.6.8")
+set(VERSION "0.6.10")
 
 add_subdirectory(src)

README-ru.md

@@ -51,13 +51,14 @@ Vitastor на данный момент находится в статусе п
 - Базовая поддержка OpenStack: драйвер Cinder, патчи для Nova и libvirt
 - Слияние снапшотов (vitastor-cli {snap-rm,flatten,merge})
 - Консольный интерфейс для управления образами (vitastor-cli {ls,create,modify})
+- Плагин для Proxmox
 
 ## Планы развития
 
 - Поддержка удаления снапшотов (слияния слоёв)
 - Более корректные скрипты разметки дисков и автоматического запуска OSD
 - Другие инструменты администрирования
-- Плагины для OpenNebula, Proxmox и других облачных систем
+- Плагины для OpenNebula и других облачных систем
 - iSCSI-прокси
 - Более быстрое переключение при отказах
 - Фоновая проверка целостности без контрольных сумм (сверка реплик)
@@ -403,12 +404,21 @@ Vitastor с однопоточной NBD прокси на том же стен
   в этом случае пострадает.
 - Быстрая сеть, минимум 10 гбит/с
 - Для наилучшей производительности нужно отключить энергосбережение CPU: `cpupower idle-set -D 0 && cpupower frequency-set -g performance`.
-- Пропишите нужные вам значения вверху файлов `/usr/lib/vitastor/mon/make-units.sh` и `/usr/lib/vitastor/mon/make-osd.sh`.
-- Создайте юниты systemd для etcd и мониторов: `/usr/lib/vitastor/mon/make-units.sh`
-- Создайте юниты для OSD: `/usr/lib/vitastor/mon/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
-- Вы можете поменять параметры OSD в юнитах systemd. Смысл некоторых параметров:
+- На хостах мониторов:
+  - Пропишите нужные вам значения в файле `/usr/lib/vitastor/mon/make-units.sh`
+  - Создайте юниты systemd для etcd и мониторов: `/usr/lib/vitastor/mon/make-units.sh`
+- Пропишите etcd_address и osd_network в `/etc/vitastor/vitastor.conf`. Например:
+  ```
+  {
+    "etcd_address": ["10.200.1.10:2379","10.200.1.11:2379","10.200.1.12:2379"],
+    "osd_network": "10.200.1.0/24"
+  }
+  ```
+- Создайте юниты systemd для OSD: `/usr/lib/vitastor/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
+- Вы можете менять параметры OSD в юнитах systemd или в `vitastor.conf`. Смысл некоторых параметров:
   - `disable_data_fsync 1` - отключает fsync, используется с SSD с конденсаторами.
   - `immediate_commit all` - используется с SSD с конденсаторами.
+    Внимание: если установлено, также нужно установить его в то же значение в etcd в /vitastor/config/global
   - `disable_device_lock 1` - отключает блокировку файла устройства, нужно, только если вы запускаете
     несколько OSD на одном блочном устройстве.
   - `flusher_count 256` - "flusher" - микропоток, удаляющий старые данные из журнала.
@@ -528,6 +538,75 @@ for i in ./???-*.yaml; do kubectl apply -f $i; done
 
 После этого вы сможете создавать PersistentVolume. Пример смотрите в файле [csi/deploy/example-pvc.yaml](csi/deploy/example-pvc.yaml).
 
+### OpenStack
+
+Чтобы подключить Vitastor к OpenStack:
+
+- Установите пакеты vitastor-client, libvirt и QEMU из DEB или RPM репозитория Vitastor
+- Примените патч `patches/nova-21.diff` или `patches/nova-23.diff` к вашей инсталляции Nova.
+  nova-21.diff подходит для Nova 21-22, nova-23.diff подходит для Nova 23-24.
+- Скопируйте `patches/cinder-vitastor.py` в инсталляцию Cinder как `cinder/volume/drivers/vitastor.py`
+- Создайте тип томов в cinder.conf (см. ниже)
+- Обязательно заблокируйте доступ от виртуальных машин к сети Vitastor (OSD и etcd), т.к. Vitastor (пока) не поддерживает аутентификацию
+- Перезапустите Cinder и Nova
+
+Пример конфигурации Cinder:
+
+```
+[DEFAULT]
+enabled_backends = lvmdriver-1, vitastor-testcluster
+# ...
+
+[vitastor-testcluster]
+volume_driver = cinder.volume.drivers.vitastor.VitastorDriver
+volume_backend_name = vitastor-testcluster
+image_volume_cache_enabled = True
+volume_clear = none
+vitastor_etcd_address = 192.168.7.2:2379
+vitastor_etcd_prefix =
+vitastor_config_path = /etc/vitastor/vitastor.conf
+vitastor_pool_id = 1
+image_upload_use_cinder_backend = True
+```
+
+Чтобы помещать в Vitastor Glance-образы, нужно использовать
+[https://docs.openstack.org/cinder/pike/admin/blockstorage-volume-backed-image.html](образы на основе томов Cinder),
+однако, поддержка этой функции ещё не проверялась.
+
+### Proxmox
+
+Чтобы подключить Vitastor к Proxmox Virtual Environment (поддерживаются версии 6.4 и 7.1):
+
+- Добавьте соответствующий Debian-репозиторий Vitastor в sources.list на хостах Proxmox
+  (buster для 6.4, bullseye для 7.1)
+- Установите пакеты vitastor-client, pve-qemu-kvm, pve-storage-vitastor (* или см. сноску) из репозитория Vitastor
+- Определите тип хранилища в `/etc/pve/storage.cfg` (см. ниже)
+- Обязательно заблокируйте доступ от виртуальных машин к сети Vitastor (OSD и etcd), т.к. Vitastor (пока) не поддерживает аутентификацию
+- Перезапустите демон Proxmox: `systemctl restart pvedaemon`
+
+Пример `/etc/pve/storage.cfg` (единственная обязательная опция - vitastor_pool, все остальные
+перечислены внизу для понимания значений по умолчанию):
+
+```
+vitastor: vitastor
+    # Пул, в который будут помещаться образы дисков
+    vitastor_pool testpool
+    # Путь к файлу конфигурации
+    vitastor_config_path /etc/vitastor/vitastor.conf
+    # Адрес(а) etcd, нужны, только если не указаны в vitastor.conf
+    vitastor_etcd_address 192.168.7.2:2379/v3
+    # Префикс ключей метаданных в etcd
+    vitastor_etcd_prefix /vitastor
+    # Префикс имён образов
+    vitastor_prefix pve/
+    # Монтировать образы через NBD прокси, через ядро (нужно только для контейнеров)
+    vitastor_nbd 0
+```
+
+\* Примечание: вместо установки пакета pve-storage-vitastor вы можете вручную скопировать файл
+[patches/PVE_VitastorPlugin.pm](patches/PVE_VitastorPlugin.pm) на хосты Proxmox как
+`/usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm`.
+
 ## Известные проблемы
 
 - Запросы удаления объектов могут в данный момент приводить к "неполным" объектам в EC-пулах,

README.md

@@ -45,6 +45,7 @@ breaking changes in the future. However, the following is implemented:
 - Basic OpenStack support: Cinder driver, Nova and libvirt patches
 - Snapshot merge tool (vitastor-cli {snap-rm,flatten,merge})
 - Image management CLI (vitastor-cli {ls,create,modify})
+- Proxmox storage plugin
 
 ## Roadmap
 
@@ -356,13 +357,21 @@ and calculate disk offsets almost by hand. This will be fixed in near future.
   with lazy fsync, but prepare for inferior single-thread latency.
 - Get a fast network (at least 10 Gbit/s).
 - Disable CPU powersaving: `cpupower idle-set -D 0 && cpupower frequency-set -g performance`.
-- Check `/usr/lib/vitastor/mon/make-units.sh` and `/usr/lib/vitastor/mon/make-osd.sh` and
-  put desired values into the variables at the top of these files.
-- Create systemd units for the monitor and etcd: `/usr/lib/vitastor/mon/make-units.sh`
+- On the monitor hosts:
+  - Edit variables at the top of `/usr/lib/vitastor/mon/make-units.sh` to desired values.
+  - Create systemd units for the monitor and etcd: `/usr/lib/vitastor/mon/make-units.sh`
+- Put etcd_address and osd_network into `/etc/vitastor/vitastor.conf`. Example:
+  ```
+  {
+    "etcd_address": ["10.200.1.10:2379","10.200.1.11:2379","10.200.1.12:2379"],
+    "osd_network": "10.200.1.0/24"
+  }
+  ```
 - Create systemd units for your OSDs: `/usr/lib/vitastor/mon/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
-- You can edit the units and change OSD configuration. Notable configuration variables:
+- You can change OSD configuration in units or in `vitastor.conf`. Notable configuration variables:
   - `disable_data_fsync 1` - only safe with server-grade drives with capacitors.
   - `immediate_commit all` - use this if all your drives are server-grade.
+    If all OSDs have it set to all then you should also put the same value in etcd into /vitastor/config/global
   - `disable_device_lock 1` - only required if you run multiple OSDs on one block device.
   - `flusher_count 256` - flusher is a micro-thread that removes old data from the journal.
     You don't have to worry about this parameter anymore, 256 is enough.
@@ -478,6 +487,73 @@ for i in ./???-*.yaml; do kubectl apply -f $i; done
 
 After that you'll be able to create PersistentVolumes. See example in [csi/deploy/example-pvc.yaml](csi/deploy/example-pvc.yaml).
 
+### OpenStack
+
+To enable Vitastor support in an OpenStack installation:
+
+- Install vitastor-client, patched QEMU and libvirt packages from Vitastor DEB or RPM repository
+- Use `patches/nova-21.diff` or `patches/nova-23.diff` to patch your Nova installation.
+  Patch 21 fits Nova 21-22, patch 23 fits Nova 23-24.
+- Install `patches/cinder-vitastor.py` as `..../cinder/volume/drivers/vitastor.py`
+- Define a volume type in cinder.conf (see below)
+- Block network access from VMs to Vitastor network (to OSDs and etcd), because Vitastor doesn't support authentication (yet)
+- Restart Cinder and Nova
+
+Cinder volume type configuration example:
+
+```
+[DEFAULT]
+enabled_backends = lvmdriver-1, vitastor-testcluster
+# ...
+
+[vitastor-testcluster]
+volume_driver = cinder.volume.drivers.vitastor.VitastorDriver
+volume_backend_name = vitastor-testcluster
+image_volume_cache_enabled = True
+volume_clear = none
+vitastor_etcd_address = 192.168.7.2:2379
+vitastor_etcd_prefix =
+vitastor_config_path = /etc/vitastor/vitastor.conf
+vitastor_pool_id = 1
+image_upload_use_cinder_backend = True
+```
+
+To put Glance images in Vitastor, use [https://docs.openstack.org/cinder/pike/admin/blockstorage-volume-backed-image.html](volume-backed images),
+although the support has not been verified yet.
+
+### Proxmox
+
+To enable Vitastor support in Proxmox Virtual Environment (6.4 and 7.1 are supported):
+
+- Add the corresponding Vitastor Debian repository into sources.list on Proxmox hosts
+  (buster for 6.4, bullseye for 7.1)
+- Install vitastor-client, pve-qemu-kvm, pve-storage-vitastor (* or see note) packages from Vitastor repository
+- Define storage in `/etc/pve/storage.cfg` (see below)
+- Block network access from VMs to Vitastor network (to OSDs and etcd), because Vitastor doesn't support authentication (yet)
+- Restart pvedaemon: `systemctl restart pvedaemon`
+
+`/etc/pve/storage.cfg` example (the only required option is vitastor_pool, all others
+are listed below with their default values):
+
+```
+vitastor: vitastor
+    # pool to put new images into
+    vitastor_pool testpool
+    # path to the configuration file
+    vitastor_config_path /etc/vitastor/vitastor.conf
+    # etcd address(es), required only if missing in the configuration file
+    vitastor_etcd_address 192.168.7.2:2379/v3
+    # prefix for keys in etcd
+    vitastor_etcd_prefix /vitastor
+    # prefix for images
+    vitastor_prefix pve/
+    # use NBD mounter (only required for containers)
+    vitastor_nbd 0
+```
+
+\* Note: you can also manually copy [patches/PVE_VitastorPlugin.pm](patches/PVE_VitastorPlugin.pm) to Proxmox hosts
+as `/usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm` instead of installing pve-storage-vitastor.
+
 ## Known Problems
 
 - Object deletion requests may currently lead to 'incomplete' objects in EC pools

csi/Makefile

@@ -1,4 +1,4 @@
-VERSION ?= v0.6.8
+VERSION ?= v0.6.10
 
 all: build push
 

csi/deploy/004-csi-nodeplugin.yaml

@@ -49,7 +49,7 @@ spec:
             capabilities:
               add: ["SYS_ADMIN"]
             allowPrivilegeEscalation: true
-          image: vitalif/vitastor-csi:v0.6.8
+          image: vitalif/vitastor-csi:v0.6.10
           args:
             - "--node=$(NODE_ID)"
             - "--endpoint=$(CSI_ENDPOINT)"

csi/deploy/007-csi-provisioner.yaml

@@ -116,7 +116,7 @@ spec:
             privileged: true
             capabilities:
               add: ["SYS_ADMIN"]
-          image: vitalif/vitastor-csi:v0.6.8
+          image: vitalif/vitastor-csi:v0.6.10
           args:
             - "--node=$(NODE_ID)"
             - "--endpoint=$(CSI_ENDPOINT)"

csi/src/config.go

@@ -5,7 +5,7 @@ package vitastor
 
 const (
     vitastorCSIDriverName    = "csi.vitastor.io"
-    vitastorCSIDriverVersion = "0.6.8"
+    vitastorCSIDriverVersion = "0.6.10"
 )
 
 // Config struct fills the parameters of request or user input

debian/changelog

@@ -1,4 +1,4 @@
-vitastor (0.6.8-1) unstable; urgency=medium
+vitastor (0.6.10-1) unstable; urgency=medium
 
   * RDMA support
   * Bugfixes

debian/control

@@ -9,7 +9,7 @@ Rules-Requires-Root: no
 
 Package: vitastor
 Architecture: amd64
-Depends: vitastor-osd, vitastor-mon, vitastor-client, vitastor-client-dev, vitastor-fio, vitastor-qemu
+Depends: vitastor-osd, vitastor-mon, vitastor-client, vitastor-client-dev, vitastor-fio
 Description: Vitastor, a fast software-defined clustered block storage
  Vitastor is a small, simple and fast clustered block storage (storage for VM drives),
  architecturally similar to Ceph which means strong consistency, primary-replication,
@@ -48,8 +48,8 @@ Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version
 Description: Vitastor, a fast software-defined clustered block storage - fio drivers
  Vitastor fio drivers for benchmarking.
 
-Package: vitastor-qemu
+Package: pve-storage-vitastor
 Architecture: amd64
-Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version}), qemu (= ${dep:qemu})
-Description: Vitastor, a fast software-defined clustered block storage - QEMU driver
- Vitastor QEMU block device driver.
+Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version})
+Description: Vitastor Proxmox Virtual Environment storage plugin
+ Vitastor storage plugin for Proxmox Virtual Environment.

debian/libvirt.Dockerfile

@@ -0,0 +1,40 @@
+# Build patched libvirt for Debian Buster or Bullseye/Sid inside a container
+# cd ..; podman build --build-arg REL=bullseye -v `pwd`/packages:/root/packages -f debian/libvirt.Dockerfile .
+
+ARG REL=
+FROM debian:$REL
+ARG REL=
+
+WORKDIR /root
+
+RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
+        echo "deb http://deb.debian.org/debian $REL-backports main" >> /etc/apt/sources.list; \
+        echo >> /etc/apt/preferences; \
+        echo 'Package: *' >> /etc/apt/preferences; \
+        echo "Pin: release a=$REL-backports" >> /etc/apt/preferences; \
+        echo 'Pin-Priority: 500' >> /etc/apt/preferences; \
+    fi; \
+    grep '^deb ' /etc/apt/sources.list | perl -pe 's/^deb/deb-src/' >> /etc/apt/sources.list; \
+    echo 'APT::Install-Recommends false;' >> /etc/apt/apt.conf; \
+    echo 'APT::Install-Suggests false;' >> /etc/apt/apt.conf
+
+RUN apt-get update; apt-get -y install devscripts
+RUN apt-get -y build-dep libvirt0
+RUN apt-get -y install libglusterfs-dev
+RUN apt-get --download-only source libvirt
+
+ADD patches/libvirt-5.0-vitastor.diff patches/libvirt-7.0-vitastor.diff patches/libvirt-7.5-vitastor.diff patches/libvirt-7.6-vitastor.diff /root
+RUN set -e; \
+    mkdir -p /root/packages/libvirt-$REL; \
+    rm -rf /root/packages/libvirt-$REL/*; \
+    cd /root/packages/libvirt-$REL; \
+    dpkg-source -x /root/libvirt*.dsc; \
+    D=$(ls -d libvirt-*/); \
+    V=$(ls -d libvirt-*/ | perl -pe 's/libvirt-(\d+\.\d+).*/$1/'); \
+    cp /root/libvirt-$V-vitastor.diff $D/debian/patches; \
+    echo libvirt-$V-vitastor.diff >> $D/debian/patches/series; \
+    cd $D; \
+    V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)(~bpo[\d\+]*)?(\+deb[u\d]+)?\).*$/$1/')+vitastor2; \
+    DEBEMAIL="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v $V 'Add Vitastor support'; \
+    DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \
+    rm -rf /root/packages/libvirt-$REL/$D

debian/patched-qemu.Dockerfile

@@ -21,14 +21,18 @@ RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
 RUN apt-get update
 RUN apt-get -y install qemu fio liburing1 liburing-dev libgoogle-perftools-dev devscripts
 RUN apt-get -y build-dep qemu
-RUN apt-get -y build-dep fio
 # To build a custom version
 #RUN cp /root/packages/qemu-orig/* /root
 RUN apt-get --download-only source qemu
-RUN apt-get --download-only source fio
 
-ADD patches/qemu-5.0-vitastor.patch patches/qemu-5.1-vitastor.patch patches/qemu-6.1-vitastor.patch /root/vitastor/patches/
+ADD patches/qemu-5.0-vitastor.patch patches/qemu-5.1-vitastor.patch patches/qemu-6.1-vitastor.patch src/qemu_driver.c /root/vitastor/patches/
 RUN set -e; \
+    apt-get install -y wget; \
+    wget -q -O /etc/apt/trusted.gpg.d/vitastor.gpg https://vitastor.io/debian/pubkey.gpg; \
+    (echo deb http://vitastor.io/debian $REL main > /etc/apt/sources.list.d/vitastor.list); \
+    (echo "APT::Install-Recommends false;" > /etc/apt/apt.conf) && \
+    apt-get update; \
+    apt-get install -y vitastor-client vitastor-client-dev quilt; \
     mkdir -p /root/packages/qemu-$REL; \
     rm -rf /root/packages/qemu-$REL/*; \
     cd /root/packages/qemu-$REL; \
@@ -47,7 +51,11 @@ RUN set -e; \
         echo qemu-5.1-vitastor.patch >> $P/series; \
     fi; \
     cd /root/packages/qemu-$REL/qemu-*/; \
+    quilt push -a; \
+    quilt add block/vitastor.c; \
+    cp /root/vitastor/patches/qemu_driver.c block/vitastor.c; \
+    quilt refresh; \
     V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)(~bpo[\d\+]*)?\).*$/$1/')+vitastor1; \
-    DEBFULLNAME="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v $V 'Plug Vitastor block driver'; \
+    DEBEMAIL="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v $V 'Plug Vitastor block driver'; \
     DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \
     rm -rf /root/packages/qemu-$REL/qemu-*/

debian/pve-storage-vitastor.install

@@ -0,0 +1 @@
+patches/PVE_VitastorPlugin.pm usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm

debian/qemu_version

@@ -1 +0,0 @@
-dep:qemu=1:5.2+dfsg-10+vitastor1

debian/raw.h

@@ -0,0 +1,19 @@
+/* Removed in Linux 5.14 */
+
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_RAW_H
+#define __LINUX_RAW_H
+
+#include <linux/types.h>
+
+#define RAW_SETBIND	_IO( 0xac, 0 )
+#define RAW_GETBIND	_IO( 0xac, 1 )
+
+struct raw_config_request 
+{
+	int	raw_minor;
+	__u64	block_major;
+	__u64	block_minor;
+};
+
+#endif /* __LINUX_RAW_H */

debian/rules

@@ -6,5 +6,5 @@ export DH_VERBOSE = 1
 
 override_dh_installdeb:
 	cat debian/fio_version >> debian/vitastor-fio.substvars
-	cat debian/qemu_version >> debian/vitastor-qemu.substvars
+	[ -f debian/qemu_version ] && (cat debian/qemu_version >> debian/vitastor-qemu.substvars) || true
 	dh_installdeb

debian/vitastor-client.install

@@ -3,3 +3,4 @@ usr/bin/vitastor-cli
 usr/bin/vitastor-rm
 usr/bin/vitastor-nbd
 usr/lib/*/libvitastor*.so*
+mon/make-osd.sh /usr/lib/vitastor

debian/vitastor-osd.install

@@ -1,3 +1,2 @@
 usr/bin/vitastor-osd
 usr/bin/vitastor-dump-journal
-mon/make-osd.sh /usr/lib/vitastor

debian/vitastor-qemu.install

@@ -1 +0,0 @@
-usr/lib/*/qemu/*

debian/vitastor.Dockerfile

@@ -7,11 +7,11 @@ ARG REL=
 
 WORKDIR /root
 
-RUN if [ "$REL" = "buster" ]; then \
-        echo 'deb http://deb.debian.org/debian buster-backports main' >> /etc/apt/sources.list; \
+RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
+        echo "deb http://deb.debian.org/debian $REL-backports main" >> /etc/apt/sources.list; \
         echo >> /etc/apt/preferences; \
         echo 'Package: *' >> /etc/apt/preferences; \
-        echo 'Pin: release a=buster-backports' >> /etc/apt/preferences; \
+        echo "Pin: release a=$REL-backports" >> /etc/apt/preferences; \
         echo 'Pin-Priority: 500' >> /etc/apt/preferences; \
     fi; \
     grep '^deb ' /etc/apt/sources.list | perl -pe 's/^deb/deb-src/' >> /etc/apt/sources.list; \
@@ -19,10 +19,8 @@ RUN if [ "$REL" = "buster" ]; then \
     echo 'APT::Install-Suggests false;' >> /etc/apt/apt.conf
 
 RUN apt-get update
-RUN apt-get -y install qemu fio liburing1 liburing-dev libgoogle-perftools-dev devscripts
-RUN apt-get -y build-dep qemu
+RUN apt-get -y install fio liburing1 liburing-dev libgoogle-perftools-dev devscripts
 RUN apt-get -y build-dep fio
-RUN apt-get --download-only source qemu
 RUN apt-get --download-only source fio
 RUN apt-get update && apt-get -y install libjerasure-dev cmake libibverbs-dev
 
@@ -32,37 +30,25 @@ RUN set -e -x; \
     cd /root/fio-build/; \
     rm -rf /root/fio-build/*; \
     dpkg-source -x /root/fio*.dsc; \
-    cd /root/packages/qemu-$REL/; \
-    rm -rf qemu*/; \
-    dpkg-source -x qemu*.dsc; \
-    cd /root/packages/qemu-$REL/qemu*/; \
-    debian/rules b/configure-stamp; \
-    cd b/qemu; \
-    make -j8 qapi/qapi-builtin-types.h; \
     mkdir -p /root/packages/vitastor-$REL; \
     rm -rf /root/packages/vitastor-$REL/*; \
     cd /root/packages/vitastor-$REL; \
-    cp -r /root/vitastor vitastor-0.6.8; \
-    ln -s /root/packages/qemu-$REL/qemu-*/ vitastor-0.6.8/qemu; \
-    ln -s /root/fio-build/fio-*/ vitastor-0.6.8/fio; \
-    cd vitastor-0.6.8; \
+    cp -r /root/vitastor vitastor-0.6.10; \
+    cd vitastor-0.6.10; \
+    ln -s /root/fio-build/fio-*/ ./fio; \
     FIO=$(head -n1 fio/debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
-    QEMU=$(head -n1 qemu/debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
-    sh copy-qemu-includes.sh; \
+    ls /usr/include/linux/raw.h || cp ./debian/raw.h /usr/include/linux/raw.h; \
     sh copy-fio-includes.sh; \
-    rm qemu fio; \
+    rm fio; \
     mkdir -p a b debian/patches; \
-    mv qemu-copy b/qemu; \
     mv fio-copy b/fio; \
-    diff -NaurpbB a b > debian/patches/qemu-fio-headers.patch || true; \
-    echo qemu-fio-headers.patch >> debian/patches/series; \
+    diff -NaurpbB a b > debian/patches/fio-headers.patch || true; \
+    echo fio-headers.patch >> debian/patches/series; \
     rm -rf a b; \
-    rm -rf /root/packages/qemu-$REL/qemu*/; \
     echo "dep:fio=$FIO" > debian/fio_version; \
-    echo "dep:qemu=$QEMU" > debian/qemu_version; \
     cd /root/packages/vitastor-$REL; \
-    tar --sort=name --mtime='2020-01-01' --owner=0 --group=0 --exclude=debian -cJf vitastor_0.6.8.orig.tar.xz vitastor-0.6.8; \
-    cd vitastor-0.6.8; \
+    tar --sort=name --mtime='2020-01-01' --owner=0 --group=0 --exclude=debian -cJf vitastor_0.6.10.orig.tar.xz vitastor-0.6.10; \
+    cd vitastor-0.6.10; \
     V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
     DEBFULLNAME="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v "$V""$REL" "Rebuild for $REL"; \
     DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \

mon/lp-optimizer.js

@@ -293,11 +293,6 @@ async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3,
     lp += 'max: '+all_pg_names.map(pg_name => (
         prev_weights[pg_name] ? `${pg_size+1}*add_${pg_name} - ${pg_size+1}*del_${pg_name}` : `${pg_size+1-move_weights[pg_name]}*${pg_name}`
     )).join(' + ')+';\n';
-    lp += all_pg_names
-        .map(pg_name => (prev_weights[pg_name] ? `add_${pg_name} - del_${pg_name}` : `${pg_name}`))
-        .join(' + ')+' = '+(pg_count
-            - Object.keys(prev_weights).reduce((a, old_pg_name) => (a + (all_pgs_hash[old_pg_name] ? prev_weights[old_pg_name] : 0)), 0)
-        )+';\n';
     for (const osd in pg_per_osd)
     {
         if (osd !== NO_OSD)

mon/make-osd.sh

@@ -4,18 +4,16 @@
 # Copyright (c) Vitaliy Filippov, 2019+
 # License: MIT
 
-# USAGE: ./make-osd.sh /dev/disk/by-partuuid/xxx [ /dev/disk/by-partuuid/yyy]...
-
-IP_SUBSTR="10.200.1."
-ETCD_HOSTS="etcd0=http://10.200.1.10:2380,etcd1=http://10.200.1.11:2380,etcd2=http://10.200.1.12:2380"
+# USAGE:
+# 1) Put etcd_address and osd_network into /etc/vitastor/vitastor.conf. Example:
+#    {
+#        "etcd_address":["http://10.200.1.10:2379/v3","http://10.200.1.11:2379/v3","http://10.200.1.12:2379/v3"],
+#        "osd_network":"10.200.1.0/24"
+#    }
+# 2) Run ./make-osd.sh /dev/disk/by-partuuid/xxx [ /dev/disk/by-partuuid/yyy]...
 
 set -e -x
 
-IP=`ip -json a s | jq -r '.[].addr_info[] | select(.local | startswith("'$IP_SUBSTR'")) | .local'`
-[ "$IP" != "" ] || exit 1
-ETCD_MON=$(echo $ETCD_HOSTS | perl -pe 's/:2380/:2379/g; s/etcd\d*=//g;')
-D=`dirname $0`
-
 # Create OSDs on all passed devices
 for DEV in $*; do
 
@@ -39,8 +37,6 @@ LimitNOFILE=1048576
 LimitNPROC=1048576
 LimitMEMLOCK=infinity
 ExecStart=/usr/bin/vitastor-osd \\
-    --etcd_address $IP:2379/v3 \\
-    --bind_address $IP \\
     --osd_num $OSD_NUM \\
     --disable_data_fsync 1 \\
     --immediate_commit all \\

mon/mon-main.js

@@ -9,17 +9,18 @@ const options = {};
 
 for (let i = 2; i < process.argv.length; i++)
 {
-    if (process.argv[i].substr(0, 2) == '--')
+    if (process.argv[i] === '-h' || process.argv[i] === '--help')
+    {
+        console.error('USAGE: '+process.argv[0]+' '+process.argv[1]+' [--verbose 1]'+
+            ' [--etcd_address "http://127.0.0.1:2379,..."] [--config_file /etc/vitastor/vitastor.conf]'+
+            ' [--etcd_prefix "/vitastor"] [--etcd_start_timeout 5]');
+        process.exit();
+    }
+    else if (process.argv[i].substr(0, 2) == '--')
     {
         options[process.argv[i].substr(2)] = process.argv[i+1];
         i++;
     }
 }
 
-if (!options.etcd_url)
-{
-    console.error('USAGE: '+process.argv[0]+' '+process.argv[1]+' --etcd_url "http://127.0.0.1:2379,..." --etcd_prefix "/vitastor" --etcd_start_timeout 5 [--verbose 1]');
-    process.exit();
-}
-
-new Mon(options).start().catch(e => { console.error(e); process.exit(); });
+new Mon(options).start().catch(e => { console.error(e); process.exit(1); });

mon/mon.js

@@ -1,6 +1,7 @@
 // Copyright (c) Vitaliy Filippov, 2019+
 // License: VNPL-1.1 (see README.md for details)
 
+const fs = require('fs');
 const http = require('http');
 const crypto = require('crypto');
 const os = require('os');
@@ -85,6 +86,7 @@ const etcd_tree = {
             // osd
             etcd_report_interval: 5,
             run_primary: true,
+            osd_network: null, // "192.168.7.0/24" or an array of masks
             bind_address: "0.0.0.0",
             bind_port: 0,
             autosync_interval: 5,
@@ -322,24 +324,53 @@ class Mon
 {
     constructor(config)
     {
-        // FIXME: Maybe prefer local etcd
-        this.etcd_urls = [];
-        for (let url of config.etcd_url.split(/,/))
+        this.die = (e) => this._die(e);
+        if (fs.existsSync(config.config_path||'/etc/vitastor/vitastor.conf'))
         {
-            let scheme = 'http';
-            url = url.trim().replace(/^(https?):\/\//, (m, m1) => { scheme = m1; return ''; });
-            if (!/\/[^\/]/.exec(url))
-                url += '/v3';
-            this.etcd_urls.push(scheme+'://'+url);
+            config = {
+                ...JSON.parse(fs.readFileSync(config.config_path||'/etc/vitastor/vitastor.conf', { encoding: 'utf-8' })),
+                ...config,
+            };
         }
+        this.parse_etcd_addresses(config.etcd_address||config.etcd_url);
         this.verbose = config.verbose || 0;
+        this.initConfig = config;
         this.config = {};
         this.etcd_prefix = config.etcd_prefix || '/vitastor';
         this.etcd_prefix = this.etcd_prefix.replace(/\/\/+/g, '/').replace(/^\/?(.*[^\/])\/?$/, '/$1');
         this.etcd_start_timeout = (config.etcd_start_timeout || 5) * 1000;
         this.state = JSON.parse(JSON.stringify(this.constructor.etcd_tree));
         this.signals_set = false;
-        this.on_stop_cb = () => this.on_stop().catch(console.error);
+        this.on_stop_cb = () => this.on_stop(0).catch(console.error);
+    }
+
+    parse_etcd_addresses(addrs)
+    {
+        const is_local_ip = this.local_ips(true).reduce((a, c) => { a[c] = true; return a; }, {});
+        this.etcd_local = [];
+        this.etcd_urls = [];
+        this.selected_etcd_url = null;
+        this.etcd_urls_to_try = [];
+        if (!(addrs instanceof Array))
+            addrs = addrs ? (''+(addrs||'')).split(/,/) : [];
+        if (!addrs.length)
+        {
+            console.error('Vitastor etcd address(es) not specified. Please set on the command line or in the config file');
+            process.exit(1);
+        }
+        for (let url of addrs)
+        {
+            let scheme = 'http';
+            url = url.trim().replace(/^(https?):\/\//, (m, m1) => { scheme = m1; return ''; });
+            const slash = url.indexOf('/');
+            const colon = url.indexOf(':');
+            const is_local = is_local_ip[colon >= 0 ? url.substr(0, colon) : (slash >= 0 ? url.substr(0, slash) : url)];
+            url = scheme+'://'+(slash >= 0 ? url : url+'/v3');
+            if (is_local)
+                this.etcd_local.push(url);
+            else
+                this.etcd_urls.push(url);
+        }
     }
 
     async start()
@@ -410,6 +441,31 @@ class Mon
         }
     }
 
+    pick_next_etcd()
+    {
+        if (this.selected_etcd_url)
+            return this.selected_etcd_url;
+        if (!this.etcd_urls_to_try || !this.etcd_urls_to_try.length)
+        {
+            this.etcd_urls_to_try = [ ...this.etcd_local ];
+            const others = [ ...this.etcd_urls ];
+            while (others.length)
+            {
+                const url = others.splice(0|(others.length*Math.random()), 1);
+                this.etcd_urls_to_try.push(url[0]);
+            }
+        }
+        this.selected_etcd_url = this.etcd_urls_to_try.shift();
+        return this.selected_etcd_url;
+    }
+
+    restart_watcher(cur_addr)
+    {
+        if (this.selected_etcd_url == cur_addr)
+            this.selected_etcd_url = null;
+        this.start_watcher(this.config.etcd_mon_retries).catch(this.die);
+    }
+
     async start_watcher(retries)
     {
         let retry = 0;
@@ -419,7 +475,8 @@ class Mon
         }
         while (retries < 0 || retry < retries)
         {
-            const base = 'ws'+this.etcd_urls[Math.floor(Math.random()*this.etcd_urls.length)].substr(4);
+            const cur_addr = this.pick_next_etcd();
+            const base = 'ws'+cur_addr.substr(4);
             const ok = await new Promise((ok, no) =>
             {
                 const timer_id = setTimeout(() =>
@@ -442,9 +499,9 @@ class Mon
                 });
             });
             if (ok)
-            {
                 break;
-            }
+            if (this.selected_etcd_url == cur_addr)
+                this.selected_etcd_url = null;
             this.ws = null;
             retry++;
         }
@@ -452,6 +509,8 @@ class Mon
         {
             this.die('Failed to open etcd watch websocket');
         }
+        const cur_addr = this.selected_etcd_url;
+        this.ws.on('error', () => this.restart_watcher(cur_addr));
         this.ws.send(JSON.stringify({
             create_request: {
                 key: b64(this.etcd_prefix+'/'),
@@ -471,12 +530,25 @@ class Mon
             catch (e)
             {
             }
-            if (!data || !data.result || !data.result.events)
+            if (!data || !data.result)
             {
-                if (!data || !data.result || !data.result.watch_id)
-                {
-                    console.error('Garbage received from watch websocket: '+msg);
+                console.error('Unknown message received from watch websocket: '+msg);
             }
+            else if (data.result.canceled)
+            {
+                // etcd watch canceled
+                if (data.result.compact_revision)
+                {
+                    // we may miss events if we proceed
+                    console.error('Revisions before '+data.result.compact_revision+' were compacted by etcd, exiting');
+                    this.on_stop(1);
+                }
+                console.error('Watch canceled by etcd, reason: '+data.result.cancel_reason+', exiting');
+                this.on_stop(1);
+            }
+            else if (data.result.created)
+            {
+                // etcd watch created
             }
             else
             {
@@ -509,7 +581,7 @@ class Mon
                 }
                 if (pg_states_changed)
                 {
-                    this.save_last_clean().catch(console.error);
+                    this.save_last_clean().catch(this.die);
                 }
                 if (stats_changed)
                 {
@@ -580,11 +652,11 @@ class Mon
         }
     }
 
-    async on_stop()
+    async on_stop(status)
     {
         clearInterval(this.lease_timer);
         await this.etcd_call('/lease/revoke', { ID: this.etcd_lease_id }, this.config.etcd_mon_timeout, this.config.etcd_mon_retries);
-        process.exit(0);
+        process.exit(status);
     }
 
     async become_master()
@@ -637,10 +709,13 @@ class Mon
         for (const node_id in this.state.config.node_placement||{})
         {
             const node_cfg = this.state.config.node_placement[node_id];
-            if (!node_id || /^\d/.exec(node_id) ||
-                !node_cfg.level || !levels[node_cfg.level])
+            if (/^\d+$/.exec(node_id))
             {
-                // All nodes must have non-empty non-numeric IDs and valid levels
+                node_cfg.level = 'osd';
+            }
+            if (!node_id || !node_cfg.level || !levels[node_cfg.level])
+            {
+                // All nodes must have non-empty IDs and valid levels
                 continue;
             }
             tree[node_id] = { id: node_id, level: node_cfg.level, parent: node_cfg.parent, children: [] };
@@ -673,10 +748,10 @@ class Mon
                         .reduce((a, c) => { a[c] = true; return a; }, {});
                 }
                 delete tree[osd_num].children;
-                if (!tree[tree[osd_num].parent])
+                if (!tree[stat.host])
                 {
-                    tree[tree[osd_num].parent] = {
-                        id: tree[osd_num].parent,
+                    tree[stat.host] = {
+                        id: stat.host,
                         level: 'host',
                         parent: null,
                         children: [],
@@ -1195,7 +1270,7 @@ class Mon
         this.recheck_timer = setTimeout(() =>
         {
             this.recheck_timer = null;
-            this.recheck_pgs().catch(console.error);
+            this.recheck_pgs().catch(this.die);
         }, this.config.mon_change_timeout || 1000);
     }
 
@@ -1342,6 +1417,7 @@ class Mon
         {
             for (const inode_num in inode_stats[pool_id])
             {
+                let nonzero = inode_stats[pool_id][inode_num].raw_used > 0;
                 for (const op of [ 'read', 'write', 'delete' ])
                 {
                     const op_st = inode_stats[pool_id][inode_num][op];
@@ -1349,6 +1425,13 @@ class Mon
                     op_st.bps = prev_st ? (op_st.bytes - prev_st.bytes) * 1000n / tm : 0;
                     op_st.iops = prev_st ? (op_st.count - prev_st.count) * 1000n / tm : 0;
                     op_st.lat = prev_st ? (op_st.usec - prev_st.usec) / ((op_st.count - prev_st.count) || 1n) : 0;
+                    if (op_st.bps > 0 || op_st.iops > 0 || op_st.lat > 0)
+                        nonzero = true;
+                }
+                if (!nonzero && (!this.state.config.inode[pool_id] || !this.state.config.inode[pool_id][inode_num]))
+                {
+                    // Deleted inode (no data, no I/O, no config)
+                    delete inode_stats[pool_id][inode_num];
                 }
             }
         }
@@ -1397,6 +1480,18 @@ class Mon
                 } });
             }
         }
+        for (const pool_id in this.state.inode.stats)
+        {
+            for (const inode_num in this.state.inode.stats[pool_id])
+            {
+                if (!inode_stats[pool_id] || !inode_stats[pool_id][inode_num])
+                {
+                    txn.push({ requestDeleteRange: {
+                        key: b64(this.etcd_prefix+'/inode/stats/'+pool_id+'/'+inode_num),
+                    } });
+                }
+            }
+        }
         for (const pool_id in this.state.pool.stats)
         {
             const pool_stats = { ...this.state.pool.stats[pool_id] };
@@ -1462,7 +1557,7 @@ class Mon
         cur[key_parts[key_parts.length-1]] = kv.value;
         if (key === 'config/global')
         {
-            this.config = this.state.config.global;
+            this.config = { ...this.initConfig, ...this.state.config.global };
             this.check_config();
             for (const osd_num in this.state.osd.stats)
             {
@@ -1499,12 +1594,15 @@ class Mon
         }
         while (retries < 0 || retry < retries)
         {
-            const base = this.etcd_urls[Math.floor(Math.random()*this.etcd_urls.length)];
+            retry++;
+            const base = this.pick_next_etcd();
             const res = await POST(base+path, body, timeout);
             if (res.error)
             {
-                console.error('etcd returned error: '+res.error);
-                break;
+                if (this.selected_etcd_url == base)
+                    this.selected_etcd_url = null;
+                console.error('failed to query etcd: '+res.error);
+                continue;
             }
             if (res.json)
             {
@@ -1513,26 +1611,20 @@ class Mon
                     console.error('etcd returned error: '+res.json.error);
                     break;
                 }
-                if (this.etcd_urls.length > 1)
-                {
-                    // Stick to the same etcd for the rest of calls
-                    this.etcd_urls = [ base ];
-                }
                 return res.json;
             }
-            retry++;
         }
         this.die();
     }
 
-    die(err)
+    _die(err)
     {
         // In fact we can just try to rejoin
         console.error(new Error(err || 'Cluster connection failed'));
         process.exit(1);
     }
 
-    local_ips()
+    local_ips(all)
     {
         const ips = [];
         const ifaces = os.networkInterfaces();
@@ -1540,7 +1632,7 @@ class Mon
         {
             for (const iface of ifaces[ifname])
             {
-                if (iface.family == 'IPv4' && !iface.internal)
+                if (iface.family == 'IPv4' && !iface.internal || all)
                 {
                     ips.push(iface.address);
                 }

mon/test-optimize-unfeasible.js

@@ -0,0 +1,33 @@
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1 (see README.md for details)
+
+const LPOptimizer = require('./lp-optimizer.js');
+
+const osd_tree = {
+    100: {
+        1: 0.1,
+        2: 0.1,
+        3: 0.1,
+    },
+    200: {
+        4: 0.1,
+        5: 0.1,
+        6: 0.1,
+    },
+};
+
+async function run()
+{
+    let res;
+    console.log('256 PGs, 3+3 OSDs, size=2');
+    res = await LPOptimizer.optimize_initial({ osd_tree, pg_size: 2, pg_count: 256 });
+    LPOptimizer.print_change_stats(res, false);
+
+    // Should NOT fail with the "unfeasible or unbounded" exception
+    console.log('\nRemoving osd.2');
+    delete osd_tree[100][2];
+    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree, pg_size: 2 });
+    LPOptimizer.print_change_stats(res, false);
+}
+
+run().catch(console.error);

patches/PVE_VitastorPlugin.pm

@@ -0,0 +1,503 @@
+# Install as /usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm
+
+# Proxmox Vitastor Driver
+# Copyright (c) Vitaliy Filippov, 2021+
+# License: VNPL-1.1 or GNU AGPLv3.0
+
+package PVE::Storage::Custom::VitastorPlugin;
+
+use strict;
+use warnings;
+
+use JSON;
+
+use PVE::Storage::Plugin;
+use PVE::Tools qw(run_command);
+
+use base qw(PVE::Storage::Plugin);
+
+sub api
+{
+    # Trick it :)
+    return PVE::Storage->APIVER;
+}
+
+sub run_cli
+{
+    my ($scfg, $cmd, %args) = @_;
+    my $retval;
+    my $stderr = '';
+    my $errmsg = $args{errmsg} ? $args{errmsg}.": " : "vitastor-cli error: ";
+    my $json = delete $args{json};
+    $json = 1 if !defined $json;
+    my $binary = delete $args{binary};
+    $binary = '/usr/bin/vitastor-cli' if !defined $binary;
+    if (!exists($args{errfunc}))
+    {
+        $args{errfunc} = sub
+        {
+            my $line = shift;
+            print STDERR $line;
+            *STDERR->flush();
+            $stderr .= $line;
+        };
+    }
+    if (!exists($args{outfunc}))
+    {
+        $retval = '';
+        $args{outfunc} = sub { $retval .= shift };
+        if ($json)
+        {
+            unshift @$cmd, '--json';
+        }
+    }
+    if ($scfg->{vitastor_etcd_address})
+    {
+        unshift @$cmd, '--etcd_address', $scfg->{vitastor_etcd_address};
+    }
+    if ($scfg->{vitastor_config_path})
+    {
+        unshift @$cmd, '--config_path', $scfg->{vitastor_config_path};
+    }
+    unshift @$cmd, $binary;
+    eval { run_command($cmd, %args); };
+    if (my $err = $@)
+    {
+        die "Error invoking vitastor-cli: $err";
+    }
+    if (defined $retval)
+    {
+        # untaint
+        $retval =~ /^(.*)$/s;
+        if ($json)
+        {
+            eval { $retval = JSON::decode_json($1); };
+            if ($@)
+            {
+                die "vitastor-cli returned bad JSON: $@";
+            }
+        }
+        else
+        {
+            $retval = $1;
+        }
+    }
+    return $retval;
+}
+
+# Configuration
+
+sub type
+{
+    return 'vitastor';
+}
+
+sub plugindata
+{
+    return {
+        content => [ { images => 1, rootdir => 1 }, { images => 1 } ],
+    };
+}
+
+sub properties
+{
+    return {
+        vitastor_etcd_address => {
+            description => 'IP address(es) of etcd.',
+            type => 'string',
+            format => 'pve-storage-portal-dns-list',
+        },
+        vitastor_etcd_prefix => {
+            description => 'Prefix for Vitastor etcd metadata',
+            type => 'string',
+        },
+        vitastor_config_path => {
+            description => 'Path to Vitastor configuration file',
+            type => 'string',
+        },
+        vitastor_prefix => {
+            description => 'Image name prefix',
+            type => 'string',
+        },
+        vitastor_pool => {
+            description => 'Default pool to use for images',
+            type => 'string',
+        },
+        vitastor_nbd => {
+            description => 'Use kernel NBD devices (slower)',
+            type => 'boolean',
+        },
+    };
+}
+
+sub options
+{
+    return {
+        nodes => { optional => 1 },
+        disable => { optional => 1 },
+        vitastor_etcd_address => { optional => 1},
+        vitastor_etcd_prefix => { optional => 1 },
+        vitastor_config_path => { optional => 1 },
+        vitastor_prefix => { optional => 1 },
+        vitastor_pool => {},
+        vitastor_nbd => { optional => 1 },
+    };
+}
+
+# Storage implementation
+
+sub parse_volname
+{
+    my ($class, $volname) = @_;
+    if ($volname =~ m/^((base-(\d+)-\S+)\/)?((?:(base)|(vm))-(\d+)-\S+)$/)
+    {
+        # ($vtype, $name, $vmid, $basename, $basevmid, $isBase, $format)
+        return ('images', $4, $7, $2, $3, $5, 'raw');
+    }
+    die "unable to parse vitastor volume name '$volname'\n";
+}
+
+sub _qemu_option
+{
+    my ($k, $v) = @_;
+    if (defined $v && $v ne "")
+    {
+        $v =~ s/:/\\:/gso;
+        return ":$k=$v";
+    }
+    return "";
+}
+
+sub path
+{
+    my ($class, $scfg, $volname, $storeid, $snapname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    $name .= '@'.$snapname if $snapname;
+    if ($scfg->{vitastor_nbd})
+    {
+        my $mapped = run_cli($scfg, [ 'ls' ], binary => '/usr/bin/vitastor-nbd');
+        my ($kerneldev) = grep { $mapped->{$_}->{image} eq $prefix.$name } keys %$mapped;
+        die "Image not mapped via NBD" if !$kerneldev;
+        return ($kerneldev, $vmid, $vtype);
+    }
+    my $path = "vitastor";
+    $path .= _qemu_option('config_path', $scfg->{vitastor_config_path});
+    # FIXME This is the only exception: etcd_address -> etcd_host for qemu
+    $path .= _qemu_option('etcd_host', $scfg->{vitastor_etcd_address});
+    $path .= _qemu_option('etcd_prefix', $scfg->{vitastor_etcd_prefix});
+    $path .= _qemu_option('image', $prefix.$name);
+    return ($path, $vmid, $vtype);
+}
+
+sub _find_free_diskname
+{
+    my ($class, $storeid, $scfg, $vmid, $fmt, $add_fmt_suffix) = @_;
+    my $list = _process_list($scfg, $storeid, run_cli($scfg, [ 'ls' ]));
+    $list = [ map { $_->{name} } @$list ];
+    return PVE::Storage::Plugin::get_next_vm_diskname($list, $storeid, $vmid, undef, $scfg);
+}
+
+# Used only in "Create Template" and, in fact, converts a VM into a template
+# As a consequence, this is always invoked with the VM powered off
+# So we just rename vm-xxx to base-xxx and make it a readonly base layer
+sub create_base
+{
+    my ($class, $storeid, $scfg, $volname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+
+    my ($vtype, $name, $vmid, $basename, $basevmid, $isBase) = $class->parse_volname($volname);
+    die "create_base not possible with base image\n" if $isBase;
+
+    my $info = _process_list($scfg, $storeid, run_cli($scfg, [ 'ls', $prefix.$name ]))->[0];
+    die "image $name does not exist\n" if !$info;
+
+    die "volname '$volname' contains wrong information about parent {$info->{parent}} $basename\n"
+        if $basename && (!$info->{parent} || $info->{parent} ne $basename);
+
+    my $newname = $name;
+    $newname =~ s/^vm-/base-/;
+
+    my $newvolname = $basename ? "$basename/$newname" : "$newname";
+    run_cli($scfg, [ 'modify', '--rename', $prefix.$newname, '--readonly', $prefix.$name ], json => 0);
+
+    return $newvolname;
+}
+
+sub clone_image
+{
+    my ($class, $scfg, $storeid, $volname, $vmid, $snapname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+
+    my $snap = '';
+    $snap = '@'.$snapname if length $snapname;
+
+    my ($vtype, $basename, $basevmid, undef, undef, $isBase) = $class->parse_volname($volname);
+    die "$volname is not a base image and snapname is not provided\n" if !$isBase && !length($snapname);
+
+    my $name = $class->find_free_diskname($storeid, $scfg, $vmid);
+
+    warn "clone $volname: $basename snapname $snap to $name\n";
+
+    my $newvol = "$basename/$name";
+    $newvol = $name if length($snapname);
+
+    run_cli($scfg, [ 'create', '--parent', $prefix.$basename.$snap, $prefix.$name ], json => 0);
+
+    return $newvol;
+}
+
+sub alloc_image
+{
+    # $size is in kb in this method
+    my ($class, $storeid, $scfg, $vmid, $fmt, $name, $size) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    die "illegal name '$name' - should be 'vm-$vmid-*'\n" if $name && $name !~ m/^vm-$vmid-/;
+    $name = $class->find_free_diskname($storeid, $scfg, $vmid) if !$name;
+    run_cli($scfg, [ 'create', '--size', (int(($size+3)/4)*4).'k', '--pool', $scfg->{vitastor_pool}, $prefix.$name ], json => 0);
+    return $name;
+}
+
+sub free_image
+{
+    my ($class, $storeid, $scfg, $volname, $isBase) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid, undef, undef, undef) = $class->parse_volname($volname);
+    $class->deactivate_volume($storeid, $scfg, $volname);
+    my $full_list = run_cli($scfg, [ 'ls', '-l' ]);
+    my $list = _process_list($scfg, $storeid, $full_list);
+    # Remove image and all its snapshots
+    my $rm_names = {
+        map { ($prefix.$_->{name} => 1) }
+        grep { $_->{name} eq $name || substr($_->{name}, 0, length($name)+1) eq ($name.'@') }
+        @$list
+    };
+    my $children = [ grep { $_->{parent_name} && $rm_names->{$_->{parent_name}} } @$full_list ];
+    die "Image has children: ".join(', ', map {
+        substr($_->{name}, 0, length $prefix) eq $prefix
+            ? substr($_->name, length $prefix)
+            : $_->{name}
+    } @$children)."\n" if @$children;
+    my $to_remove = [ grep { $rm_names->{$_->{name}} } @$full_list ];
+    for my $rmi (@$to_remove)
+    {
+        run_cli($scfg, [ 'rm-data', '--pool', $rmi->{pool_id}, '--inode', $rmi->{inode_num} ], json => 0);
+    }
+    for my $rmi (@$to_remove)
+    {
+        run_cli($scfg, [ 'rm', $rmi->{name} ], json => 0);
+    }
+    return undef;
+}
+
+sub _process_list
+{
+    my ($scfg, $storeid, $result) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my $list = [];
+    foreach my $el (@$result)
+    {
+        next if !$el->{name} || length($prefix) && substr($el->{name}, 0, length $prefix) ne $prefix;
+        my $name = substr($el->{name}, length $prefix);
+        next if $name =~ /@/;
+        my ($owner) = $name =~ /^(?:vm|base)-(\d+)-/s;
+        next if !defined $owner;
+        my $parent = !defined $el->{parent_name}
+            ? undef
+            : ($prefix eq '' || substr($el->{parent_name}, 0, length $prefix) eq $prefix
+                ? substr($el->{parent_name}, length $prefix) : '');
+        my $volid = $parent && $parent =~ /^(base-\d+-\S+)$/s
+            ? "$storeid:$1/$name" : "$storeid:$name";
+        push @$list, {
+            format => 'raw',
+            volid => $volid,
+            name => $name,
+            size => $el->{size},
+            parent => $parent,
+            vmid => $owner,
+        };
+    }
+    return $list;
+}
+
+sub list_images
+{
+    my ($class, $storeid, $scfg, $vmid, $vollist, $cache) = @_;
+    my $list = _process_list($scfg, $storeid, run_cli($scfg, [ 'ls', '-l' ]));
+    if ($vollist)
+    {
+        my $h = { map { ($_ => 1) } @$vollist };
+        $list = [ grep { $h->{$_->{volid}} } @$list ]
+    }
+    elsif (defined $vmid)
+    {
+        $list = [ grep { $_->{vmid} eq $vmid } @$list ];
+    }
+    return $list;
+}
+
+sub status
+{
+    my ($class, $storeid, $scfg, $cache) = @_;
+    my $stats = [ grep { $_->{name} eq $scfg->{vitastor_pool} } @{ run_cli($scfg, [ 'df' ]) } ]->[0];
+    my $free = $stats ? $stats->{max_available} : 0;
+    my $used = $stats ? $stats->{used_raw}/($stats->{raw_to_usable}||1) : 0;
+    my $total = $free+$used;
+    my $active = $stats ? 1 : 0;
+    return ($total, $free, $used, $active);
+}
+
+sub activate_storage
+{
+    my ($class, $storeid, $scfg, $cache) = @_;
+    return 1;
+}
+
+sub deactivate_storage
+{
+    my ($class, $storeid, $scfg, $cache) = @_;
+    return 1;
+}
+
+sub map_volume
+{
+    my ($class, $storeid, $scfg, $volname, $snapname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+
+    my ($vtype, $img_name, $vmid) = $class->parse_volname($volname);
+    my $name = $img_name;
+    $name .= '@'.$snapname if $snapname;
+
+    my $mapped = run_cli($scfg, [ 'ls' ], binary => '/usr/bin/vitastor-nbd');
+    my ($kerneldev) = grep { $mapped->{$_}->{image} eq $prefix.$name } keys %$mapped;
+    return $kerneldev if $kerneldev && -b $kerneldev; # already mapped
+
+    $kerneldev = run_cli($scfg, [ 'map', '--image', $prefix.$name ], binary => '/usr/bin/vitastor-nbd', json => 0);
+    return $kerneldev;
+}
+
+sub unmap_volume
+{
+    my ($class, $storeid, $scfg, $volname, $snapname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+
+    return 1 if !$scfg->{vitastor_nbd};
+
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    $name .= '@'.$snapname if $snapname;
+
+    my $mapped = run_cli($scfg, [ 'ls' ], binary => '/usr/bin/vitastor-nbd');
+    my ($kerneldev) = grep { $mapped->{$_}->{image} eq $prefix.$name } keys %$mapped;
+    if ($kerneldev && -b $kerneldev)
+    {
+        run_cli($scfg, [ 'unmap', $kerneldev ], binary => '/usr/bin/vitastor-nbd', json => 0);
+    }
+
+    return 1;
+}
+
+sub activate_volume
+{
+    my ($class, $storeid, $scfg, $volname, $snapname, $cache) = @_;
+    $class->map_volume($storeid, $scfg, $volname, $snapname) if $scfg->{vitastor_nbd};
+    return 1;
+}
+
+sub deactivate_volume
+{
+    my ($class, $storeid, $scfg, $volname, $snapname, $cache) = @_;
+    $class->unmap_volume($storeid, $scfg, $volname, $snapname);
+    return 1;
+}
+
+sub volume_size_info
+{
+    my ($class, $scfg, $storeid, $volname, $timeout) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    my $info = _process_list($scfg, $storeid, run_cli($scfg, [ 'ls', $prefix.$name ]))->[0];
+    #return wantarray ? ($size, $format, $used, $parent, $st->ctime) : $size;
+    return $info->{size};
+}
+
+sub volume_resize
+{
+    my ($class, $scfg, $storeid, $volname, $size, $running) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    # $size is in bytes in this method
+    run_cli($scfg, [ 'modify', '--resize', (int(($size+4095)/4096)*4).'k', $prefix.$name ], json => 0);
+    return undef;
+}
+
+sub volume_snapshot
+{
+    my ($class, $scfg, $storeid, $volname, $snap) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    run_cli($scfg, [ 'create', '--snapshot', $snap, $prefix.$name ], json => 0);
+    return undef;
+}
+
+sub volume_snapshot_rollback
+{
+    my ($class, $scfg, $storeid, $volname, $snap) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    run_cli($scfg, [ 'rm', $prefix.$name ], json => 0);
+    run_cli($scfg, [ 'create', '--parent', $prefix.$name.'@'.$snap, $prefix.$name ], json => 0);
+    return undef;
+}
+
+sub volume_snapshot_delete
+{
+    my ($class, $scfg, $storeid, $volname, $snap, $running) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    run_cli($scfg, [ 'rm', $prefix.$name.'@'.$snap ], json => 0);
+    return undef;
+}
+
+sub volume_snapshot_needs_fsfreeze
+{
+    return 1;
+}
+
+sub volume_has_feature
+{
+    my ($class, $scfg, $feature, $storeid, $volname, $snapname, $running) = @_;
+    my $features = {
+        snapshot => { current => 1, snap => 1 },
+        clone => { base => 1, snap => 1 },
+        template => { current => 1 },
+        copy => { base => 1, current => 1, snap => 1 },
+        sparseinit => { base => 1, current => 1 },
+        rename => { current => 1 },
+    };
+    my ($vtype, $name, $vmid, $basename, $basevmid, $isBase) = $class->parse_volname($volname);
+    my $key = undef;
+    if ($snapname)
+    {
+        $key = 'snap';
+    }
+    else
+    {
+        $key = $isBase ? 'base' : 'current';
+    }
+    return 1 if $features->{$feature}->{$key};
+    return undef;
+}
+
+sub rename_volume
+{
+    my ($class, $scfg, $storeid, $source_volname, $target_vmid, $target_volname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my (undef, $source_image, $source_vmid, $base_name, $base_vmid, undef, $format) =
+        $class->parse_volname($source_volname);
+    $target_volname = $class->find_free_diskname($storeid, $scfg, $target_vmid, $format) if !$target_volname;
+    run_cli($scfg, [ 'modify', '--rename', $prefix.$target_volname, $prefix.$source_image ], json => 0);
+    $base_name = $base_name ? "${base_name}/" : '';
+    return "${storeid}:${base_name}${target_volname}";
+}
+
+1;

patches/cinder-vitastor.py

@@ -1,3 +1,8 @@
+# Workaround:
+# 461: allow to create volume from snapshot
+# 527: adjust iodepth for faster deletion
+# 591: add failure case when creating a volume 
+
 # Vitastor Driver for OpenStack Cinder
 #
 # --------------------------------------------
@@ -50,7 +55,7 @@ from cinder.volume import configuration
 from cinder.volume import driver
 from cinder.volume import volume_utils
 
-VERSION = '0.6.8'
+VERSION = '0.6.10'
 
 LOG = logging.getLogger(__name__)
 
@@ -455,7 +460,7 @@ class VitastorDriver(driver.CloneableImageVD,
         vol_name = utils.convert_str(volume.name)
         snap_name = utils.convert_str(snapshot.name)
 
-        snap = self._get_image(vol_name+'@'+snap_name)
+        snap = self._get_image("volume-"+snapshot.volume_id+'@'+snap_name)
         if not snap:
             raise exception.SnapshotNotFound(snapshot_id = snap_name)
         snap_inode_id = int(resp['responses'][0]['kvs'][0]['value']['id'])
@@ -524,7 +529,7 @@ class VitastorDriver(driver.CloneableImageVD,
         for kv in layers:
             args = [
                 'vitastor-cli', 'rm-data', '--pool', str(kv['value']['pool_id']),
-                '--inode', str(kv['value']['id']), '--progress', '0',
+                '--inode', str(kv['value']['id']), '--iodepth', '4', '--progress', '0',
                 *(self._vitastor_args())
             ]
             try:
@@ -584,6 +589,8 @@ class VitastorDriver(driver.CloneableImageVD,
                 { 'request_put': { 'key': 'config/inode/'+pool_s+'/'+str(image_id), 'value': json.dumps({
                     **cfg, 'name': vol_name,
                 }) } },
+            ], 'failure': [
+                { 'request_put': { 'key': 'index/maxid/'+pool_s, 'value': image_id } },
             ] })
             if not resp.get('succeeded'):
                 # repeat
@@ -658,8 +665,8 @@ class VitastorDriver(driver.CloneableImageVD,
                 'etcd_address': self.configuration.vitastor_etcd_address,
                 'etcd_prefix': self.configuration.vitastor_etcd_prefix,
                 'name': volume.name,
-                'logical_block_size': 512,
-                'physical_block_size': 4096,
+                'logical_block_size': '512',
+                'physical_block_size': '4096',
             }
         }
         LOG.debug('connection data: %s', data)

patches/libvirt-5.0-vitastor.diff

@@ -1,4 +1,4 @@
-commit bd283191b3e7a4c6d1c100d3d96e348a1ebffe55
+commit 7f01510ef207940b07fac4f5fc8b9f1580b443aa
 Author: Vitaliy Filippov <vitalif@yourcmc.ru>
 Date:   Sun Jun 27 12:52:40 2021 +0300
 
@@ -65,10 +65,38 @@ index 4bf2b5f..dbc011b 100644
  
  int                     virConnectListAllStoragePools(virConnectPtr conn,
 diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
-index 222bb8c..685d255 100644
+index 222bb8c..2c30c55 100644
 --- a/src/conf/domain_conf.c
 +++ b/src/conf/domain_conf.c
-@@ -8653,6 +8653,10 @@ virDomainDiskSourceNetworkParse(xmlNodePtr node,
+@@ -4667,8 +4667,7 @@ virDomainDeviceDefPostParseCommon(virDomainDeviceDefPtr dev,
+     if (dev->type == VIR_DOMAIN_DEVICE_DISK) {
+         virDomainDiskDefPtr disk = dev->data.disk;
+ 
+-        /* internal snapshots and config files are currently supported
+-         * only with rbd: */
++        /* internal snapshots are currently supported only with rbd: */
+         if (virStorageSourceGetActualType(disk->src) != VIR_STORAGE_TYPE_NETWORK &&
+             disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) {
+             if (disk->src->snapshot) {
+@@ -4677,11 +4676,15 @@ virDomainDeviceDefPostParseCommon(virDomainDeviceDefPtr dev,
+                                  "only with 'rbd' disks"));
+                 return -1;
+             }
+-
++        }
++        /* config files are currently supported only with rbd and vitastor: */
++        if (virStorageSourceGetActualType(disk->src) != VIR_STORAGE_TYPE_NETWORK &&
++            disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD &&
++            disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR) {
+             if (disk->src->configFile) {
+                 virReportError(VIR_ERR_XML_ERROR, "%s",
+                                _("<config> element is currently supported "
+-                                 "only with 'rbd' disks"));
++                                 "only with 'rbd' and 'vitastor' disks"));
+                 return -1;
+             }
+         }
+@@ -8653,6 +8656,10 @@ virDomainDiskSourceNetworkParse(xmlNodePtr node,
          goto cleanup;
      }
  
@@ -79,7 +107,7 @@ index 222bb8c..685d255 100644
      if ((haveTLS = virXMLPropString(node, "tls")) &&
          (src->haveTLS = virTristateBoolTypeFromString(haveTLS)) <= 0) {
          virReportError(VIR_ERR_XML_ERROR,
-@@ -23849,6 +23853,10 @@ virDomainDiskSourceFormatNetwork(virBufferPtr attrBuf,
+@@ -23849,6 +23856,10 @@ virDomainDiskSourceFormatNetwork(virBufferPtr attrBuf,
  
      virBufferEscapeString(attrBuf, " name='%s'", path ? path : src->path);
  
@@ -90,7 +118,7 @@ index 222bb8c..685d255 100644
      VIR_FREE(path);
  
      if (src->haveTLS != VIR_TRISTATE_BOOL_ABSENT &&
-@@ -30930,6 +30938,7 @@ virDomainDiskTranslateSourcePool(virDomainDiskDefPtr def)
+@@ -30930,6 +30941,7 @@ virDomainDiskTranslateSourcePool(virDomainDiskDefPtr def)
  
      case VIR_STORAGE_POOL_MPATH:
      case VIR_STORAGE_POOL_RBD:
@@ -216,7 +244,7 @@ index 73e988a..ab7bb81 100644
      case VIR_STORAGE_NET_PROTOCOL_NONE:
          virReportError(VIR_ERR_NO_SUPPORT,
 diff --git a/src/qemu/qemu_block.c b/src/qemu/qemu_block.c
-index cbf0aa4..096700d 100644
+index cbf0aa4..f0ca9e7 100644
 --- a/src/qemu/qemu_block.c
 +++ b/src/qemu/qemu_block.c
 @@ -959,6 +959,42 @@ qemuBlockStorageSourceGetRBDProps(virStorageSourcePtr src)
@@ -275,7 +303,7 @@ index cbf0aa4..096700d 100644
              if (!(fileprops = qemuBlockStorageSourceGetSheepdogProps(src)))
                  return NULL;
 diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
-index 822d5f8..e375cef 100644
+index 822d5f8..abec34e 100644
 --- a/src/qemu/qemu_command.c
 +++ b/src/qemu/qemu_command.c
 @@ -975,6 +975,43 @@ qemuBuildNetworkDriveStr(virStorageSourcePtr src,
@@ -387,7 +415,7 @@ index 4a13e90..33301c7 100644
              ignore_value(VIR_STRDUP(stable_path, data->path));
              break;
 diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c
-index bd4b027..b323cd6 100644
+index bd4b027..8454906 100644
 --- a/src/util/virstoragefile.c
 +++ b/src/util/virstoragefile.c
 @@ -84,7 +84,8 @@ VIR_ENUM_IMPL(virStorageNetProtocol, VIR_STORAGE_NET_PROTOCOL_LAST,

patches/libvirt-7.0-vitastor.diff

@@ -1,4 +1,4 @@
-commit 41cdfe8317d98f70aadedfdbb381effed2641bdd
+commit 4e74c622884e2585b2cfcdf322fbd2bff6de41ca
 Author: Vitaliy Filippov <vitalif@yourcmc.ru>
 Date:   Fri Jul 9 01:31:57 2021 +0300
 
@@ -65,10 +65,38 @@ index 089e1e0..d7e7ef4 100644
  
  int                     virConnectListAllStoragePools(virConnectPtr conn,
 diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
-index 01b7187..c6e9702 100644
+index 01b7187..645c758 100644
 --- a/src/conf/domain_conf.c
 +++ b/src/conf/domain_conf.c
-@@ -8261,7 +8261,8 @@ virDomainDiskSourceNetworkParse(xmlNodePtr node,
+@@ -5230,8 +5230,7 @@ virDomainDiskDefPostParse(virDomainDiskDefPtr disk,
+                           const virDomainDef *def,
+                           virDomainXMLOptionPtr xmlopt)
+ {
+-    /* internal snapshots and config files are currently supported
+-     * only with rbd: */
++    /* internal snapshots are currently supported only with rbd: */
+     if (virStorageSourceGetActualType(disk->src) != VIR_STORAGE_TYPE_NETWORK &&
+         disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) {
+         if (disk->src->snapshot) {
+@@ -5240,11 +5239,15 @@ virDomainDiskDefPostParse(virDomainDiskDefPtr disk,
+                              "only with 'rbd' disks"));
+             return -1;
+         }
+-
++    }
++    /* config files are currently supported only with rbd and vitastor: */
++    if (virStorageSourceGetActualType(disk->src) != VIR_STORAGE_TYPE_NETWORK &&
++        disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD &&
++        disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR) {
+         if (disk->src->configFile) {
+             virReportError(VIR_ERR_XML_ERROR, "%s",
+                            _("<config> element is currently supported "
+-                             "only with 'rbd' disks"));
++                             "only with 'rbd' and 'vitastor' disks"));
+             return -1;
+         }
+     }
+@@ -8261,7 +8264,8 @@ virDomainDiskSourceNetworkParse(xmlNodePtr node,
      src->configFile = virXPathString("string(./config/@file)", ctxt);
  
      if (src->protocol == VIR_STORAGE_NET_PROTOCOL_HTTP ||
@@ -78,7 +106,7 @@ index 01b7187..c6e9702 100644
          src->query = virXMLPropString(node, "query");
  
      if (virDomainStorageNetworkParseHosts(node, ctxt, &src->hosts, &src->nhosts) < 0)
-@@ -31392,6 +31393,7 @@ virDomainStorageSourceTranslateSourcePool(virStorageSourcePtr src,
+@@ -31392,6 +31396,7 @@ virDomainStorageSourceTranslateSourcePool(virStorageSourcePtr src,
  
      case VIR_STORAGE_POOL_MPATH:
      case VIR_STORAGE_POOL_RBD:
@@ -216,7 +244,7 @@ index 17b93d0..c5a0084 100644
      case VIR_STORAGE_NET_PROTOCOL_NONE:
          virReportError(VIR_ERR_NO_SUPPORT,
 diff --git a/src/qemu/qemu_block.c b/src/qemu/qemu_block.c
-index f9c6da2..922dde5 100644
+index f9c6da2..d837a05 100644
 --- a/src/qemu/qemu_block.c
 +++ b/src/qemu/qemu_block.c
 @@ -938,6 +938,38 @@ qemuBlockStorageSourceGetRBDProps(virStorageSourcePtr src,
@@ -293,7 +321,7 @@ index f9c6da2..922dde5 100644
              driver = "sheepdog";
              if (!(location = qemuBlockStorageSourceGetSheepdogProps(src)))
 diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
-index 6f970a3..10b39ca 100644
+index 6f970a3..4c03fb8 100644
 --- a/src/qemu/qemu_command.c
 +++ b/src/qemu/qemu_command.c
 @@ -1034,6 +1034,43 @@ qemuBuildNetworkDriveStr(virStorageSourcePtr src,
@@ -415,7 +443,7 @@ index 29c4c86..a27ad94 100644
      case VIR_STORAGE_POOL_LOGICAL:
      case VIR_STORAGE_POOL_DISK:
 diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c
-index 0d3c2af..36e3afc 100644
+index 0d3c2af..edb7f9e 100644
 --- a/src/util/virstoragefile.c
 +++ b/src/util/virstoragefile.c
 @@ -91,6 +91,7 @@ VIR_ENUM_IMPL(virStorageNetProtocol,

patches/libvirt-7.5-vitastor.diff

@@ -1,4 +1,4 @@
-commit c6e1958a1b4974828e8e5852beb252ce6594e670
+commit c97d7f2bfb7798f0d68bdba2646245dcfb940efa
 Author: Vitaliy Filippov <vitalif@yourcmc.ru>
 Date:   Mon Jun 28 01:20:19 2021 +0300
 
@@ -86,6 +86,37 @@ index d78f846..f7222e3 100644
      case VIR_STORAGE_POOL_SHEEPDOG:
      case VIR_STORAGE_POOL_GLUSTER:
      case VIR_STORAGE_POOL_LAST:
+diff --git a/src/conf/domain_validate.c b/src/conf/domain_validate.c
+index 2124d25..6acc6fa 100644
+--- a/src/conf/domain_validate.c
++++ b/src/conf/domain_validate.c
+@@ -470,7 +470,7 @@ virDomainDiskDefValidateSourceChainOne(const virStorageSource *src)
+         }
+     }
+ 
+-    /* internal snapshots and config files are currently supported only with rbd: */
++    /* internal snapshots are currently supported only with rbd: */
+     if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK &&
+         src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) {
+         if (src->snapshot) {
+@@ -479,11 +479,15 @@ virDomainDiskDefValidateSourceChainOne(const virStorageSource *src)
+                              "only with 'rbd' disks"));
+             return -1;
+         }
+-
++    }
++    /* config files are currently supported only with rbd and vitastor: */
++    if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK &&
++        src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD &&
++        src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR) {
+         if (src->configFile) {
+             virReportError(VIR_ERR_XML_ERROR, "%s",
+                            _("<config> element is currently supported "
+-                             "only with 'rbd' disks"));
++                             "only with 'rbd' and 'vitastor' disks"));
+             return -1;
+         }
+     }
 diff --git a/src/conf/storage_conf.c b/src/conf/storage_conf.c
 index 2aa9a3d..166ca1f 100644
 --- a/src/conf/storage_conf.c
@@ -248,7 +279,7 @@ index c0905b0..c172378 100644
      case VIR_STORAGE_NET_PROTOCOL_NONE:
          virReportError(VIR_ERR_NO_SUPPORT,
 diff --git a/src/qemu/qemu_block.c b/src/qemu/qemu_block.c
-index 6627d04..c33f428 100644
+index 6627d04..f769d24 100644
 --- a/src/qemu/qemu_block.c
 +++ b/src/qemu/qemu_block.c
 @@ -928,6 +928,38 @@ qemuBlockStorageSourceGetRBDProps(virStorageSource *src,
@@ -325,7 +356,7 @@ index 6627d04..c33f428 100644
              driver = "sheepdog";
              if (!(location = qemuBlockStorageSourceGetSheepdogProps(src)))
 diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
-index ea51369..8258632 100644
+index ea51369..d714597 100644
 --- a/src/qemu/qemu_command.c
 +++ b/src/qemu/qemu_command.c
 @@ -1074,6 +1074,43 @@ qemuBuildNetworkDriveStr(virStorageSource *src,
@@ -435,7 +466,7 @@ index c2ff4b8..70d0689 100644
          case VIR_STORAGE_POOL_ZFS:
          case VIR_STORAGE_POOL_LAST:
 diff --git a/src/storage_file/storage_source_backingstore.c b/src/storage_file/storage_source_backingstore.c
-index e48ae72..d7a9b72 100644
+index e48ae72..2017ccc 100644
 --- a/src/storage_file/storage_source_backingstore.c
 +++ b/src/storage_file/storage_source_backingstore.c
 @@ -284,6 +284,75 @@ virStorageSourceParseRBDColonString(const char *rbdstr,

patches/libvirt-7.6-vitastor.diff

@@ -0,0 +1,692 @@
+commit c97d7f2bfb7798f0d68bdba2646245dcfb940efa
+Author: Vitaliy Filippov <vitalif@yourcmc.ru>
+Date:   Mon Jun 28 01:20:19 2021 +0300
+
+    Add Vitastor support
+
+Index: libvirt-7.6.0/docs/schemas/domaincommon.rng
+===================================================================
+--- libvirt-7.6.0.orig/docs/schemas/domaincommon.rng
++++ libvirt-7.6.0/docs/schemas/domaincommon.rng
+@@ -1877,6 +1877,35 @@
+     </element>
+   </define>
+ 
++  <define name="diskSourceNetworkProtocolVitastor">
++    <element name="source">
++      <interleave>
++        <attribute name="protocol">
++          <value>vitastor</value>
++        </attribute>
++        <ref name="diskSourceCommon"/>
++        <optional>
++          <attribute name="name"/>
++        </optional>
++        <optional>
++          <attribute name="query"/>
++        </optional>
++        <zeroOrMore>
++          <ref name="diskSourceNetworkHost"/>
++        </zeroOrMore>
++        <optional>
++          <element name="config">
++            <attribute name="file">
++              <ref name="absFilePath"/>
++            </attribute>
++            <empty/>
++          </element>
++        </optional>
++        <empty/>
++      </interleave>
++    </element>
++  </define>
++
+   <define name="diskSourceNetworkProtocolISCSI">
+     <element name="source">
+       <attribute name="protocol">
+@@ -2133,6 +2162,7 @@
+       <ref name="diskSourceNetworkProtocolSimple"/>
+       <ref name="diskSourceNetworkProtocolVxHS"/>
+       <ref name="diskSourceNetworkProtocolNFS"/>
++      <ref name="diskSourceNetworkProtocolVitastor"/>
+     </choice>
+   </define>
+ 
+Index: libvirt-7.6.0/include/libvirt/libvirt-storage.h
+===================================================================
+--- libvirt-7.6.0.orig/include/libvirt/libvirt-storage.h
++++ libvirt-7.6.0/include/libvirt/libvirt-storage.h
+@@ -245,6 +245,7 @@ typedef enum {
+     VIR_CONNECT_LIST_STORAGE_POOLS_ZFS           = 1 << 17,
+     VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE      = 1 << 18,
+     VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT  = 1 << 19,
++    VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR      = 1 << 20,
+ } virConnectListAllStoragePoolsFlags;
+ 
+ int                     virConnectListAllStoragePools(virConnectPtr conn,
+Index: libvirt-7.6.0/src/conf/domain_conf.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/domain_conf.c
++++ libvirt-7.6.0/src/conf/domain_conf.c
+@@ -8268,7 +8268,8 @@ virDomainDiskSourceNetworkParse(xmlNodeP
+     src->configFile = virXPathString("string(./config/@file)", ctxt);
+ 
+     if (src->protocol == VIR_STORAGE_NET_PROTOCOL_HTTP ||
+-        src->protocol == VIR_STORAGE_NET_PROTOCOL_HTTPS)
++        src->protocol == VIR_STORAGE_NET_PROTOCOL_HTTPS ||
++        src->protocol == VIR_STORAGE_NET_PROTOCOL_VITASTOR)
+         src->query = virXMLPropString(node, "query");
+ 
+     if (virDomainStorageNetworkParseHosts(node, ctxt, &src->hosts, &src->nhosts) < 0)
+@@ -30831,6 +30832,7 @@ virDomainStorageSourceTranslateSourcePoo
+ 
+     case VIR_STORAGE_POOL_MPATH:
+     case VIR_STORAGE_POOL_RBD:
++    case VIR_STORAGE_POOL_VITASTOR:
+     case VIR_STORAGE_POOL_SHEEPDOG:
+     case VIR_STORAGE_POOL_GLUSTER:
+     case VIR_STORAGE_POOL_LAST:
+Index: libvirt-7.6.0/src/conf/domain_validate.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/domain_validate.c
++++ libvirt-7.6.0/src/conf/domain_validate.c
+@@ -470,7 +470,7 @@ virDomainDiskDefValidateSourceChainOne(c
+         }
+     }
+ 
+-    /* internal snapshots and config files are currently supported only with rbd: */
++    /* internal snapshots are currently supported only with rbd: */
+     if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK &&
+         src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) {
+         if (src->snapshot) {
+@@ -479,11 +479,15 @@ virDomainDiskDefValidateSourceChainOne(c
+                              "only with 'rbd' disks"));
+             return -1;
+         }
+-
++    }
++    /* config files are currently supported only with rbd and vitastor: */
++    if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK &&
++        src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD &&
++        src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR) {
+         if (src->configFile) {
+             virReportError(VIR_ERR_XML_ERROR, "%s",
+                            _("<config> element is currently supported "
+-                             "only with 'rbd' disks"));
++                             "only with 'rbd' and 'vitastor' disks"));
+             return -1;
+         }
+     }
+Index: libvirt-7.6.0/src/conf/storage_conf.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/storage_conf.c
++++ libvirt-7.6.0/src/conf/storage_conf.c
+@@ -60,7 +60,7 @@ VIR_ENUM_IMPL(virStoragePool,
+               "logical", "disk", "iscsi",
+               "iscsi-direct", "scsi", "mpath",
+               "rbd", "sheepdog", "gluster",
+-              "zfs", "vstorage",
++              "zfs", "vstorage", "vitastor",
+ );
+ 
+ VIR_ENUM_IMPL(virStoragePoolFormatFileSystem,
+@@ -246,6 +246,18 @@ static virStoragePoolTypeInfo poolTypeIn
+           .formatToString = virStorageFileFormatTypeToString,
+       }
+     },
++    {.poolType = VIR_STORAGE_POOL_VITASTOR,
++     .poolOptions = {
++         .flags = (VIR_STORAGE_POOL_SOURCE_HOST |
++                   VIR_STORAGE_POOL_SOURCE_NETWORK |
++                   VIR_STORAGE_POOL_SOURCE_NAME),
++      },
++      .volOptions = {
++          .defaultFormat = VIR_STORAGE_FILE_RAW,
++          .formatFromString = virStorageVolumeFormatFromString,
++          .formatToString = virStorageFileFormatTypeToString,
++      }
++    },
+     {.poolType = VIR_STORAGE_POOL_SHEEPDOG,
+      .poolOptions = {
+          .flags = (VIR_STORAGE_POOL_SOURCE_HOST |
+@@ -546,6 +558,11 @@ virStoragePoolDefParseSource(xmlXPathCon
+                        _("element 'name' is mandatory for RBD pool"));
+         return -1;
+     }
++    if (pool_type == VIR_STORAGE_POOL_VITASTOR && source->name == NULL) {
++        virReportError(VIR_ERR_XML_ERROR, "%s",
++                       _("element 'name' is mandatory for Vitastor pool"));
++        return -1;
++    }
+ 
+     if (options->formatFromString) {
+         g_autofree char *format = NULL;
+@@ -1182,6 +1199,7 @@ virStoragePoolDefFormatBuf(virBuffer *bu
+     /* RBD, Sheepdog, Gluster and Iscsi-direct devices are not local block devs nor
+      * files, so they don't have a target */
+     if (def->type != VIR_STORAGE_POOL_RBD &&
++        def->type != VIR_STORAGE_POOL_VITASTOR &&
+         def->type != VIR_STORAGE_POOL_SHEEPDOG &&
+         def->type != VIR_STORAGE_POOL_GLUSTER &&
+         def->type != VIR_STORAGE_POOL_ISCSI_DIRECT) {
+Index: libvirt-7.6.0/src/conf/storage_conf.h
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/storage_conf.h
++++ libvirt-7.6.0/src/conf/storage_conf.h
+@@ -106,6 +106,7 @@ typedef enum {
+     VIR_STORAGE_POOL_GLUSTER,  /* Gluster device */
+     VIR_STORAGE_POOL_ZFS,      /* ZFS */
+     VIR_STORAGE_POOL_VSTORAGE, /* Virtuozzo Storage */
++    VIR_STORAGE_POOL_VITASTOR, /* Vitastor */
+ 
+     VIR_STORAGE_POOL_LAST,
+ } virStoragePoolType;
+@@ -465,6 +466,7 @@ VIR_ENUM_DECL(virStoragePartedFs);
+                  VIR_CONNECT_LIST_STORAGE_POOLS_SCSI     | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_MPATH    | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_RBD      | \
++                 VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_SHEEPDOG | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_GLUSTER  | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_ZFS      | \
+Index: libvirt-7.6.0/src/conf/storage_source_conf.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/storage_source_conf.c
++++ libvirt-7.6.0/src/conf/storage_source_conf.c
+@@ -85,6 +85,7 @@ VIR_ENUM_IMPL(virStorageNetProtocol,
+               "ssh",
+               "vxhs",
+               "nfs",
++              "vitastor",
+ );
+ 
+ 
+@@ -1262,6 +1263,7 @@ virStorageSourceNetworkDefaultPort(virSt
+         case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+             return 24007;
+ 
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+         case VIR_STORAGE_NET_PROTOCOL_RBD:
+             /* we don't provide a default for RBD */
+             return 0;
+Index: libvirt-7.6.0/src/conf/storage_source_conf.h
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/storage_source_conf.h
++++ libvirt-7.6.0/src/conf/storage_source_conf.h
+@@ -127,6 +127,7 @@ typedef enum {
+     VIR_STORAGE_NET_PROTOCOL_SSH,
+     VIR_STORAGE_NET_PROTOCOL_VXHS,
+     VIR_STORAGE_NET_PROTOCOL_NFS,
++    VIR_STORAGE_NET_PROTOCOL_VITASTOR,
+ 
+     VIR_STORAGE_NET_PROTOCOL_LAST
+ } virStorageNetProtocol;
+Index: libvirt-7.6.0/src/conf/virstorageobj.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/virstorageobj.c
++++ libvirt-7.6.0/src/conf/virstorageobj.c
+@@ -1481,6 +1481,7 @@ virStoragePoolObjSourceFindDuplicateCb(c
+             return 1;
+         break;
+ 
++    case VIR_STORAGE_POOL_VITASTOR:
+     case VIR_STORAGE_POOL_RBD:
+     case VIR_STORAGE_POOL_LAST:
+         break;
+@@ -1980,6 +1981,8 @@ virStoragePoolObjMatch(virStoragePoolObj
+                (obj->def->type == VIR_STORAGE_POOL_MPATH))   ||
+               (MATCH(VIR_CONNECT_LIST_STORAGE_POOLS_RBD) &&
+                (obj->def->type == VIR_STORAGE_POOL_RBD))     ||
++              (MATCH(VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR) &&
++               (obj->def->type == VIR_STORAGE_POOL_VITASTOR)) ||
+               (MATCH(VIR_CONNECT_LIST_STORAGE_POOLS_SHEEPDOG) &&
+                (obj->def->type == VIR_STORAGE_POOL_SHEEPDOG)) ||
+               (MATCH(VIR_CONNECT_LIST_STORAGE_POOLS_GLUSTER) &&
+Index: libvirt-7.6.0/src/libvirt-storage.c
+===================================================================
+--- libvirt-7.6.0.orig/src/libvirt-storage.c
++++ libvirt-7.6.0/src/libvirt-storage.c
+@@ -92,6 +92,7 @@ virStoragePoolGetConnect(virStoragePoolP
+  * VIR_CONNECT_LIST_STORAGE_POOLS_SCSI
+  * VIR_CONNECT_LIST_STORAGE_POOLS_MPATH
+  * VIR_CONNECT_LIST_STORAGE_POOLS_RBD
++ * VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR
+  * VIR_CONNECT_LIST_STORAGE_POOLS_SHEEPDOG
+  * VIR_CONNECT_LIST_STORAGE_POOLS_GLUSTER
+  * VIR_CONNECT_LIST_STORAGE_POOLS_ZFS
+Index: libvirt-7.6.0/src/libxl/libxl_conf.c
+===================================================================
+--- libvirt-7.6.0.orig/src/libxl/libxl_conf.c
++++ libvirt-7.6.0/src/libxl/libxl_conf.c
+@@ -972,6 +972,7 @@ libxlMakeNetworkDiskSrcStr(virStorageSou
+     case VIR_STORAGE_NET_PROTOCOL_SSH:
+     case VIR_STORAGE_NET_PROTOCOL_VXHS:
+     case VIR_STORAGE_NET_PROTOCOL_NFS:
++    case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+     case VIR_STORAGE_NET_PROTOCOL_LAST:
+     case VIR_STORAGE_NET_PROTOCOL_NONE:
+         virReportError(VIR_ERR_NO_SUPPORT,
+Index: libvirt-7.6.0/src/libxl/xen_xl.c
+===================================================================
+--- libvirt-7.6.0.orig/src/libxl/xen_xl.c
++++ libvirt-7.6.0/src/libxl/xen_xl.c
+@@ -1540,6 +1540,7 @@ xenFormatXLDiskSrcNet(virStorageSource *
+     case VIR_STORAGE_NET_PROTOCOL_SSH:
+     case VIR_STORAGE_NET_PROTOCOL_VXHS:
+     case VIR_STORAGE_NET_PROTOCOL_NFS:
++    case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+     case VIR_STORAGE_NET_PROTOCOL_LAST:
+     case VIR_STORAGE_NET_PROTOCOL_NONE:
+         virReportError(VIR_ERR_NO_SUPPORT,
+Index: libvirt-7.6.0/src/qemu/qemu_block.c
+===================================================================
+--- libvirt-7.6.0.orig/src/qemu/qemu_block.c
++++ libvirt-7.6.0/src/qemu/qemu_block.c
+@@ -916,6 +916,38 @@ qemuBlockStorageSourceGetRBDProps(virSto
+ 
+ 
+ static virJSONValue *
++qemuBlockStorageSourceGetVitastorProps(virStorageSource *src)
++{
++    virJSONValue *ret = NULL;
++    virStorageNetHostDef *host;
++    size_t i;
++    g_auto(virBuffer) buf = VIR_BUFFER_INITIALIZER;
++    g_autofree char *etcd = NULL;
++
++    for (i = 0; i < src->nhosts; i++) {
++        host = src->hosts + i;
++        if ((virStorageNetHostTransport)host->transport != VIR_STORAGE_NET_HOST_TRANS_TCP) {
++            return NULL;
++        }
++        virBufferAsprintf(&buf, i > 0 ? ",%s:%u" : "%s:%u", host->name, host->port);
++    }
++    if (src->nhosts > 0) {
++        etcd = virBufferContentAndReset(&buf);
++    }
++
++    if (virJSONValueObjectCreate(&ret,
++                                 "S:etcd-host", etcd,
++                                 "S:etcd-prefix", src->query,
++                                 "S:config-path", src->configFile,
++                                 "s:image", src->path,
++                                 NULL) < 0)
++        return NULL;
++
++    return ret;
++}
++
++
++static virJSONValue *
+ qemuBlockStorageSourceGetSheepdogProps(virStorageSource *src)
+ {
+     g_autoptr(virJSONValue) serverprops = NULL;
+@@ -1205,6 +1237,12 @@ qemuBlockStorageSourceGetBackendProps(vi
+                 return NULL;
+             break;
+ 
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
++            driver = "vitastor";
++            if (!(fileprops = qemuBlockStorageSourceGetVitastorProps(src)))
++                return NULL;
++            break;
++
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+             driver = "sheepdog";
+             if (!(fileprops = qemuBlockStorageSourceGetSheepdogProps(src)))
+@@ -2219,6 +2257,7 @@ qemuBlockGetBackingStoreString(virStorag
+ 
+             case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+             case VIR_STORAGE_NET_PROTOCOL_RBD:
++            case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+             case VIR_STORAGE_NET_PROTOCOL_VXHS:
+             case VIR_STORAGE_NET_PROTOCOL_NFS:
+             case VIR_STORAGE_NET_PROTOCOL_SSH:
+@@ -2596,6 +2635,12 @@ qemuBlockStorageSourceCreateGetStoragePr
+                 return -1;
+             break;
+ 
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
++            driver = "vitastor";
++            if (!(location = qemuBlockStorageSourceGetVitastorProps(src)))
++                return -1;
++            break;
++
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+             driver = "sheepdog";
+             if (!(location = qemuBlockStorageSourceGetSheepdogProps(src)))
+Index: libvirt-7.6.0/src/qemu/qemu_command.c
+===================================================================
+--- libvirt-7.6.0.orig/src/qemu/qemu_command.c
++++ libvirt-7.6.0/src/qemu/qemu_command.c
+@@ -1074,6 +1074,43 @@ qemuBuildNetworkDriveStr(virStorageSourc
+             ret = virBufferContentAndReset(&buf);
+             break;
+ 
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
++            if (strchr(src->path, ':')) {
++                virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
++                               _("':' not allowed in Vitastor source volume name '%s'"),
++                               src->path);
++                return NULL;
++            }
++
++            virBufferStrcat(&buf, "vitastor:image=", src->path, NULL);
++
++            if (src->nhosts > 0) {
++                virBufferAddLit(&buf, ":etcd-host=");
++                for (i = 0; i < src->nhosts; i++) {
++                    if (i)
++                        virBufferAddLit(&buf, ",");
++
++                    /* assume host containing : is ipv6 */
++                    if (strchr(src->hosts[i].name, ':'))
++                        virBufferEscape(&buf, '\\', ":", "[%s]",
++                                        src->hosts[i].name);
++                    else
++                        virBufferAsprintf(&buf, "%s", src->hosts[i].name);
++
++                    if (src->hosts[i].port)
++                        virBufferAsprintf(&buf, "\\:%u", src->hosts[i].port);
++                }
++            }
++
++            if (src->configFile)
++                virBufferEscape(&buf, '\\', ":", ":config-path=%s", src->configFile);
++
++            if (src->query)
++                virBufferEscape(&buf, '\\', ":", ":etcd-prefix=%s", src->query);
++
++            ret = virBufferContentAndReset(&buf);
++            break;
++
+         case VIR_STORAGE_NET_PROTOCOL_VXHS:
+             virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+                            _("VxHS protocol does not support URI syntax"));
+Index: libvirt-7.6.0/src/qemu/qemu_domain.c
+===================================================================
+--- libvirt-7.6.0.orig/src/qemu/qemu_domain.c
++++ libvirt-7.6.0/src/qemu/qemu_domain.c
+@@ -4900,7 +4900,8 @@ qemuDomainValidateStorageSource(virStora
+     if (src->query &&
+         (actualType != VIR_STORAGE_TYPE_NETWORK ||
+          (src->protocol != VIR_STORAGE_NET_PROTOCOL_HTTPS &&
+-          src->protocol != VIR_STORAGE_NET_PROTOCOL_HTTP))) {
++          src->protocol != VIR_STORAGE_NET_PROTOCOL_HTTP &&
++          src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR))) {
+         virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                        _("query is supported only with HTTP(S) protocols"));
+         return -1;
+@@ -10102,6 +10103,7 @@ qemuDomainPrepareStorageSourceTLS(virSto
+         break;
+ 
+     case VIR_STORAGE_NET_PROTOCOL_RBD:
++    case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+     case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+     case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+     case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+Index: libvirt-7.6.0/src/qemu/qemu_snapshot.c
+===================================================================
+--- libvirt-7.6.0.orig/src/qemu/qemu_snapshot.c
++++ libvirt-7.6.0/src/qemu/qemu_snapshot.c
+@@ -402,6 +402,7 @@ qemuSnapshotPrepareDiskExternalInactive(
+         case VIR_STORAGE_NET_PROTOCOL_NONE:
+         case VIR_STORAGE_NET_PROTOCOL_NBD:
+         case VIR_STORAGE_NET_PROTOCOL_RBD:
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+         case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+         case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+@@ -494,6 +495,7 @@ qemuSnapshotPrepareDiskExternalActive(vi
+         case VIR_STORAGE_NET_PROTOCOL_NONE:
+         case VIR_STORAGE_NET_PROTOCOL_NBD:
+         case VIR_STORAGE_NET_PROTOCOL_RBD:
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+         case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+         case VIR_STORAGE_NET_PROTOCOL_HTTP:
+@@ -647,6 +649,7 @@ qemuSnapshotPrepareDiskInternal(virDomai
+         case VIR_STORAGE_NET_PROTOCOL_NONE:
+         case VIR_STORAGE_NET_PROTOCOL_NBD:
+         case VIR_STORAGE_NET_PROTOCOL_RBD:
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+         case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+         case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+Index: libvirt-7.6.0/src/storage/storage_driver.c
+===================================================================
+--- libvirt-7.6.0.orig/src/storage/storage_driver.c
++++ libvirt-7.6.0/src/storage/storage_driver.c
+@@ -1644,6 +1644,7 @@ storageVolLookupByPathCallback(virStorag
+ 
+         case VIR_STORAGE_POOL_GLUSTER:
+         case VIR_STORAGE_POOL_RBD:
++        case VIR_STORAGE_POOL_VITASTOR:
+         case VIR_STORAGE_POOL_SHEEPDOG:
+         case VIR_STORAGE_POOL_ZFS:
+         case VIR_STORAGE_POOL_LAST:
+Index: libvirt-7.6.0/src/storage_file/storage_source_backingstore.c
+===================================================================
+--- libvirt-7.6.0.orig/src/storage_file/storage_source_backingstore.c
++++ libvirt-7.6.0/src/storage_file/storage_source_backingstore.c
+@@ -285,6 +285,75 @@ virStorageSourceParseRBDColonString(cons
+ 
+ 
+ static int
++virStorageSourceParseVitastorColonString(const char *colonstr,
++                                         virStorageSource *src)
++{
++    char *p, *e, *next;
++    g_autofree char *options = NULL;
++
++    /* optionally skip the "vitastor:" prefix if provided */
++    if (STRPREFIX(colonstr, "vitastor:"))
++        colonstr += strlen("vitastor:");
++
++    options = g_strdup(colonstr);
++
++    p = options;
++    while (*p) {
++        /* find : delimiter or end of string */
++        for (e = p; *e && *e != ':'; ++e) {
++            if (*e == '\\') {
++                e++;
++                if (*e == '\0')
++                    break;
++            }
++        }
++        if (*e == '\0') {
++            next = e;    /* last kv pair */
++        } else {
++            next = e + 1;
++            *e = '\0';
++        }
++
++        if (STRPREFIX(p, "image=")) {
++            src->path = g_strdup(p + strlen("image="));
++        } else if (STRPREFIX(p, "etcd-prefix=")) {
++            src->query = g_strdup(p + strlen("etcd-prefix="));
++        } else if (STRPREFIX(p, "config-path=")) {
++            src->configFile = g_strdup(p + strlen("config-path="));
++        } else if (STRPREFIX(p, "etcd-host=")) {
++            char *h, *sep;
++
++            h = p + strlen("etcd-host=");
++            while (h < e) {
++                for (sep = h; sep < e; ++sep) {
++                    if (*sep == '\\' && (sep[1] == ',' ||
++                                         sep[1] == ';' ||
++                                         sep[1] == ' ')) {
++                        *sep = '\0';
++                        sep += 2;
++                        break;
++                    }
++                }
++
++                if (virStorageSourceRBDAddHost(src, h) < 0)
++                    return -1;
++
++                h = sep;
++            }
++        }
++
++        p = next;
++    }
++
++    if (!src->path) {
++        return -1;
++    }
++
++    return 0;
++}
++
++
++static int
+ virStorageSourceParseNBDColonString(const char *nbdstr,
+                                     virStorageSource *src)
+ {
+@@ -396,6 +465,11 @@ virStorageSourceParseBackingColon(virSto
+             return -1;
+         break;
+ 
++    case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
++        if (virStorageSourceParseVitastorColonString(path, src) < 0)
++            return -1;
++        break;
++
+     case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+     case VIR_STORAGE_NET_PROTOCOL_LAST:
+     case VIR_STORAGE_NET_PROTOCOL_NONE:
+@@ -985,6 +1059,54 @@ virStorageSourceParseBackingJSONRBD(virS
+ }
+ 
+ static int
++virStorageSourceParseBackingJSONVitastor(virStorageSource *src,
++                                         virJSONValue *json,
++                                         const char *jsonstr G_GNUC_UNUSED,
++                                         int opaque G_GNUC_UNUSED)
++{
++    const char *filename;
++    const char *image = virJSONValueObjectGetString(json, "image");
++    const char *conf = virJSONValueObjectGetString(json, "config-path");
++    const char *etcd_prefix = virJSONValueObjectGetString(json, "etcd-prefix");
++    virJSONValue *servers = virJSONValueObjectGetArray(json, "server");
++    size_t nservers;
++    size_t i;
++
++    src->type = VIR_STORAGE_TYPE_NETWORK;
++    src->protocol = VIR_STORAGE_NET_PROTOCOL_VITASTOR;
++
++    /* legacy syntax passed via 'filename' option */
++    if ((filename = virJSONValueObjectGetString(json, "filename")))
++        return virStorageSourceParseVitastorColonString(filename, src);
++
++    if (!image) {
++        virReportError(VIR_ERR_INVALID_ARG, "%s",
++                       _("missing image name in Vitastor backing volume "
++                         "JSON specification"));
++        return -1;
++    }
++
++    src->path = g_strdup(image);
++    src->configFile = g_strdup(conf);
++    src->query = g_strdup(etcd_prefix);
++
++    if (servers) {
++        nservers = virJSONValueArraySize(servers);
++
++        src->hosts = g_new0(virStorageNetHostDef, nservers);
++        src->nhosts = nservers;
++
++        for (i = 0; i < nservers; i++) {
++            if (virStorageSourceParseBackingJSONInetSocketAddress(src->hosts + i,
++                                                                  virJSONValueArrayGet(servers, i)) < 0)
++                return -1;
++        }
++    }
++
++    return 0;
++}
++
++static int
+ virStorageSourceParseBackingJSONRaw(virStorageSource *src,
+                                     virJSONValue *json,
+                                     const char *jsonstr,
+@@ -1162,6 +1284,7 @@ static const struct virStorageSourceJSON
+     {"sheepdog", false, virStorageSourceParseBackingJSONSheepdog, 0},
+     {"ssh", false, virStorageSourceParseBackingJSONSSH, 0},
+     {"rbd", false, virStorageSourceParseBackingJSONRBD, 0},
++    {"vitastor", false, virStorageSourceParseBackingJSONVitastor, 0},
+     {"raw", true, virStorageSourceParseBackingJSONRaw, 0},
+     {"nfs", false, virStorageSourceParseBackingJSONNFS, 0},
+     {"vxhs", false, virStorageSourceParseBackingJSONVxHS, 0},
+Index: libvirt-7.6.0/src/test/test_driver.c
+===================================================================
+--- libvirt-7.6.0.orig/src/test/test_driver.c
++++ libvirt-7.6.0/src/test/test_driver.c
+@@ -7193,6 +7193,7 @@ testStorageVolumeTypeForPool(int pooltyp
+     case VIR_STORAGE_POOL_ISCSI_DIRECT:
+     case VIR_STORAGE_POOL_GLUSTER:
+     case VIR_STORAGE_POOL_RBD:
++    case VIR_STORAGE_POOL_VITASTOR:
+         return VIR_STORAGE_VOL_NETWORK;
+     case VIR_STORAGE_POOL_LOGICAL:
+     case VIR_STORAGE_POOL_DISK:
+Index: libvirt-7.6.0/tests/storagepoolcapsschemadata/poolcaps-fs.xml
+===================================================================
+--- libvirt-7.6.0.orig/tests/storagepoolcapsschemadata/poolcaps-fs.xml
++++ libvirt-7.6.0/tests/storagepoolcapsschemadata/poolcaps-fs.xml
+@@ -204,4 +204,11 @@
+       </enum>
+     </volOptions>
+   </pool>
++  <pool type='vitastor' supported='no'>
++    <volOptions>
++      <defaultFormat type='raw'/>
++      <enum name='targetFormatType'>
++      </enum>
++    </volOptions>
++  </pool>
+ </storagepoolCapabilities>
+Index: libvirt-7.6.0/tests/storagepoolcapsschemadata/poolcaps-full.xml
+===================================================================
+--- libvirt-7.6.0.orig/tests/storagepoolcapsschemadata/poolcaps-full.xml
++++ libvirt-7.6.0/tests/storagepoolcapsschemadata/poolcaps-full.xml
+@@ -204,4 +204,11 @@
+       </enum>
+     </volOptions>
+   </pool>
++  <pool type='vitastor' supported='yes'>
++    <volOptions>
++      <defaultFormat type='raw'/>
++      <enum name='targetFormatType'>
++      </enum>
++    </volOptions>
++  </pool>
+ </storagepoolCapabilities>
+Index: libvirt-7.6.0/tests/storagepoolxml2argvtest.c
+===================================================================
+--- libvirt-7.6.0.orig/tests/storagepoolxml2argvtest.c
++++ libvirt-7.6.0/tests/storagepoolxml2argvtest.c
+@@ -68,6 +68,7 @@ testCompareXMLToArgvFiles(bool shouldFai
+     case VIR_STORAGE_POOL_GLUSTER:
+     case VIR_STORAGE_POOL_ZFS:
+     case VIR_STORAGE_POOL_VSTORAGE:
++    case VIR_STORAGE_POOL_VITASTOR:
+     case VIR_STORAGE_POOL_LAST:
+     default:
+         VIR_TEST_DEBUG("pool type '%s' has no xml2argv test", defTypeStr);
+Index: libvirt-7.6.0/tools/virsh-pool.c
+===================================================================
+--- libvirt-7.6.0.orig/tools/virsh-pool.c
++++ libvirt-7.6.0/tools/virsh-pool.c
+@@ -1231,6 +1231,9 @@ cmdPoolList(vshControl *ctl, const vshCm
+             case VIR_STORAGE_POOL_VSTORAGE:
+                 flags |= VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE;
+                 break;
++            case VIR_STORAGE_POOL_VITASTOR:
++                flags |= VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR;
++                break;
+             case VIR_STORAGE_POOL_LAST:
+                 break;
+             }

patches/libvirt-example.xml

@@ -15,9 +15,10 @@
       <target dev='vda' bus='virtio' />
       <driver name='qemu' type='raw' />
       <!-- name is Vitastor image name -->
-      <!-- config (optional) is the path to Vitastor's configuration file -->
       <!-- query (optional) is Vitastor's etcd_prefix -->
-      <source protocol='vitastor' name='debian9' query='/vitastor' config='/etc/vitastor/vitastor.conf'>
+      <source protocol='vitastor' name='debian9' query='/vitastor'>
+        <!-- config (optional) is the path to Vitastor's configuration file -->
+        <config file='/etc/vitastor/vitastor.conf' />
         <!-- hosts = etcd addresses -->
         <host name='192.168.7.2' port='2379' />
       </source>

patches/nova-21.diff

@@ -0,0 +1,288 @@
+diff --git a/nova/virt/image/model.py b/nova/virt/image/model.py
+index 971f7e9c07..ec3fca72cb 100644
+--- a/nova/virt/image/model.py
++++ b/nova/virt/image/model.py
+@@ -129,3 +129,22 @@ class RBDImage(Image):
+         self.user = user
+         self.password = password
+         self.servers = servers
++
++
++class VitastorImage(Image):
++    """Class for images in a remote Vitastor cluster"""
++
++    def __init__(self, name, etcd_address = None, etcd_prefix = None, config_path = None):
++        """Create a new Vitastor image object
++
++        :param name: name of the image
++        :param etcd_address: etcd URL(s) (optional)
++        :param etcd_prefix: etcd prefix (optional)
++        :param config_path: path to the configuration (optional)
++        """
++        super(VitastorImage, self).__init__(FORMAT_RAW)
++
++        self.name = name
++        self.etcd_address = etcd_address
++        self.etcd_prefix = etcd_prefix
++        self.config_path = config_path
+diff --git a/nova/virt/images.py b/nova/virt/images.py
+index 5358f3766a..ebe3d6effb 100644
+--- a/nova/virt/images.py
++++ b/nova/virt/images.py
+@@ -41,7 +41,7 @@ IMAGE_API = glance.API()
+ 
+ def qemu_img_info(path, format=None):
+     """Return an object containing the parsed output from qemu-img info."""
+-    if not os.path.exists(path) and not path.startswith('rbd:'):
++    if not os.path.exists(path) and not path.startswith('rbd:') and not path.startswith('vitastor:'):
+         raise exception.DiskNotFound(location=path)
+ 
+     info = nova.privsep.qemu.unprivileged_qemu_img_info(path, format=format)
+@@ -50,7 +50,7 @@ def qemu_img_info(path, format=None):
+ 
+ def privileged_qemu_img_info(path, format=None, output_format='json'):
+     """Return an object containing the parsed output from qemu-img info."""
+-    if not os.path.exists(path) and not path.startswith('rbd:'):
++    if not os.path.exists(path) and not path.startswith('rbd:') and not path.startswith('vitastor:'):
+         raise exception.DiskNotFound(location=path)
+ 
+     info = nova.privsep.qemu.privileged_qemu_img_info(path, format=format)
+diff --git a/nova/virt/libvirt/config.py b/nova/virt/libvirt/config.py
+index ea525648b3..d7aa798954 100644
+--- a/nova/virt/libvirt/config.py
++++ b/nova/virt/libvirt/config.py
+@@ -1005,6 +1005,8 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
+         self.driver_iommu = False
+         self.source_path = None
+         self.source_protocol = None
++        self.source_query = None
++        self.source_config = None
+         self.source_name = None
+         self.source_hosts = []
+         self.source_ports = []
+@@ -1133,6 +1135,10 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
+             source = etree.Element("source", protocol=self.source_protocol)
+             if self.source_name is not None:
+                 source.set('name', self.source_name)
++            if self.source_query is not None:
++                source.set('query', self.source_query)
++            if self.source_config is not None:
++                source.append(etree.Element('config', file=self.source_config))
+             hosts_info = zip(self.source_hosts, self.source_ports)
+             for name, port in hosts_info:
+                 host = etree.Element('host', name=name)
+diff --git a/nova/virt/libvirt/driver.py b/nova/virt/libvirt/driver.py
+index fbd033690a..74dc59ce87 100644
+--- a/nova/virt/libvirt/driver.py
++++ b/nova/virt/libvirt/driver.py
+@@ -180,6 +180,7 @@ libvirt_volume_drivers = [
+     'local=nova.virt.libvirt.volume.volume.LibvirtVolumeDriver',
+     'fake=nova.virt.libvirt.volume.volume.LibvirtFakeVolumeDriver',
+     'rbd=nova.virt.libvirt.volume.net.LibvirtNetVolumeDriver',
++    'vitastor=nova.virt.libvirt.volume.vitastor.LibvirtVitastorVolumeDriver',
+     'nfs=nova.virt.libvirt.volume.nfs.LibvirtNFSVolumeDriver',
+     'smbfs=nova.virt.libvirt.volume.smbfs.LibvirtSMBFSVolumeDriver',
+     'fibre_channel='
+@@ -287,10 +288,10 @@ class LibvirtDriver(driver.ComputeDriver):
+         # This prevents the risk of one test setting a capability
+         # which bleeds over into other tests.
+ 
+-        # LVM and RBD require raw images. If we are not configured to
++        # LVM, RBD, Vitastor require raw images. If we are not configured to
+         # force convert images into raw format, then we _require_ raw
+         # images only.
+-        raw_only = ('rbd', 'lvm')
++        raw_only = ('rbd', 'lvm', 'vitastor')
+         requires_raw_image = (CONF.libvirt.images_type in raw_only and
+                               not CONF.force_raw_images)
+         requires_ploop_image = CONF.libvirt.virt_type == 'parallels'
+@@ -703,12 +704,12 @@ class LibvirtDriver(driver.ComputeDriver):
+         # Some imagebackends are only able to import raw disk images,
+         # and will fail if given any other format. See the bug
+         # https://bugs.launchpad.net/nova/+bug/1816686 for more details.
+-        if CONF.libvirt.images_type in ('rbd',):
++        if CONF.libvirt.images_type in ('rbd', 'vitastor'):
+             if not CONF.force_raw_images:
+                 msg = _("'[DEFAULT]/force_raw_images = False' is not "
+-                        "allowed with '[libvirt]/images_type = rbd'. "
++                        "allowed with '[libvirt]/images_type = rbd' or 'vitastor'. "
+                         "Please check the two configs and if you really "
+-                        "do want to use rbd as images_type, set "
++                        "do want to use rbd or vitastor as images_type, set "
+                         "force_raw_images to True.")
+                 raise exception.InvalidConfiguration(msg)
+ 
+@@ -2165,6 +2166,16 @@ class LibvirtDriver(driver.ComputeDriver):
+                     if connection_info['data'].get('auth_enabled'):
+                         username = connection_info['data']['auth_username']
+                         path = f"rbd:{volume_name}:id={username}"
++                elif connection_info['driver_volume_type'] == 'vitastor':
++                    volume_name = connection_info['data']['name']
++                    path = 'vitastor:image='+volume_name.replace(':', '\\:')
++                    for k in [ 'config_path', 'etcd_address', 'etcd_prefix' ]:
++                        if k in connection_info['data']:
++                            kk = k
++                            if kk == 'etcd_address':
++                                # FIXME use etcd_address in qemu driver
++                                kk = 'etcd_host'
++                            path += ":"+kk.replace('_', '-')+"="+connection_info['data'][k].replace(':', '\\:')
+                 else:
+                     path = 'unknown'
+                     raise exception.DiskNotFound(location='unknown')
+@@ -2440,8 +2451,8 @@ class LibvirtDriver(driver.ComputeDriver):
+ 
+         image_format = CONF.libvirt.snapshot_image_format or source_type
+ 
+-        # NOTE(bfilippov): save lvm and rbd as raw
+-        if image_format == 'lvm' or image_format == 'rbd':
++        # NOTE(bfilippov): save lvm and rbd and vitastor as raw
++        if image_format == 'lvm' or image_format == 'rbd' or image_format == 'vitastor':
+             image_format = 'raw'
+ 
+         metadata = self._create_snapshot_metadata(instance.image_meta,
+@@ -2512,7 +2523,7 @@ class LibvirtDriver(driver.ComputeDriver):
+                               expected_state=task_states.IMAGE_UPLOADING)
+ 
+             # TODO(nic): possibly abstract this out to the root_disk
+-            if source_type == 'rbd' and live_snapshot:
++            if (source_type == 'rbd' or source_type == 'vitastor') and live_snapshot:
+                 # Standard snapshot uses qemu-img convert from RBD which is
+                 # not safe to run with live_snapshot.
+                 live_snapshot = False
+@@ -3715,7 +3726,7 @@ class LibvirtDriver(driver.ComputeDriver):
+         # cleanup rescue volume
+         lvm.remove_volumes([lvmdisk for lvmdisk in self._lvm_disks(instance)
+                                 if lvmdisk.endswith('.rescue')])
+-        if CONF.libvirt.images_type == 'rbd':
++        if CONF.libvirt.images_type == 'rbd' or CONF.libvirt.images_type == 'vitastor':
+             filter_fn = lambda disk: (disk.startswith(instance.uuid) and
+                                       disk.endswith('.rescue'))
+             rbd_utils.RBDDriver().cleanup_volumes(filter_fn)
+@@ -3972,6 +3983,8 @@ class LibvirtDriver(driver.ComputeDriver):
+         # TODO(mikal): there is a bug here if images_type has
+         # changed since creation of the instance, but I am pretty
+         # sure that this bug already exists.
++        if CONF.libvirt.images_type == 'vitastor':
++            return 'vitastor'
+         return 'rbd' if CONF.libvirt.images_type == 'rbd' else 'raw'
+ 
+     @staticmethod
+@@ -4370,10 +4383,10 @@ class LibvirtDriver(driver.ComputeDriver):
+                 finally:
+                     # NOTE(mikal): if the config drive was imported into RBD,
+                     # then we no longer need the local copy
+-                    if CONF.libvirt.images_type == 'rbd':
++                    if CONF.libvirt.images_type == 'rbd' or CONF.libvirt.images_type == 'vitastor':
+                         LOG.info('Deleting local config drive %(path)s '
+-                                 'because it was imported into RBD.',
+-                                 {'path': config_disk_local_path},
++                                 'because it was imported into %(type).',
++                                 {'path': config_disk_local_path, 'type': CONF.libvirt.images_type},
+                                  instance=instance)
+                         os.unlink(config_disk_local_path)
+ 
+diff --git a/nova/virt/libvirt/utils.py b/nova/virt/libvirt/utils.py
+index c1dc34daf4..263965912f 100644
+--- a/nova/virt/libvirt/utils.py
++++ b/nova/virt/libvirt/utils.py
+@@ -399,6 +399,10 @@ def find_disk(guest: libvirt_guest.Guest) -> ty.Tuple[str, ty.Optional[str]]:
+             disk_path = disk.source_name
+             if disk_path:
+                 disk_path = 'rbd:' + disk_path
++        elif not disk_path and disk.source_protocol == 'vitastor':
++            disk_path = disk.source_name
++            if disk_path:
++                disk_path = 'vitastor:' + disk_path
+ 
+     if not disk_path:
+         raise RuntimeError(_("Can't retrieve root device path "
+@@ -417,6 +421,8 @@ def get_disk_type_from_path(path: str) -> ty.Optional[str]:
+         return 'lvm'
+     elif path.startswith('rbd:'):
+         return 'rbd'
++    elif path.startswith('vitastor:'):
++        return 'vitastor'
+     elif (os.path.isdir(path) and
+           os.path.exists(os.path.join(path, "DiskDescriptor.xml"))):
+         return 'ploop'
+diff --git a/nova/virt/libvirt/volume/vitastor.py b/nova/virt/libvirt/volume/vitastor.py
+new file mode 100644
+index 0000000000..0256df62c1
+--- /dev/null
++++ b/nova/virt/libvirt/volume/vitastor.py
+@@ -0,0 +1,75 @@
++# Copyright (c) 2021+, Vitaliy Filippov <vitalif@yourcmc.ru>
++#
++#    Licensed under the Apache License, Version 2.0 (the "License"); you may
++#    not use this file except in compliance with the License. You may obtain
++#    a copy of the License at
++#
++#         http://www.apache.org/licenses/LICENSE-2.0
++#
++#    Unless required by applicable law or agreed to in writing, software
++#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
++#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
++#    License for the specific language governing permissions and limitations
++#    under the License.
++
++from os_brick import exception as os_brick_exception
++from os_brick import initiator
++from os_brick.initiator import connector
++from oslo_log import log as logging
++
++import nova.conf
++from nova import utils
++from nova.virt.libvirt.volume import volume as libvirt_volume
++
++
++CONF = nova.conf.CONF
++LOG = logging.getLogger(__name__)
++
++
++class LibvirtVitastorVolumeDriver(libvirt_volume.LibvirtBaseVolumeDriver):
++    """Driver to attach Vitastor volumes to libvirt."""
++    def __init__(self, host):
++        super(LibvirtVitastorVolumeDriver, self).__init__(host, is_block_dev=False)
++
++    def connect_volume(self, connection_info, instance):
++        pass
++
++    def disconnect_volume(self, connection_info, instance):
++        pass
++
++    def get_config(self, connection_info, disk_info):
++        """Returns xml for libvirt."""
++        conf = super(LibvirtVitastorVolumeDriver, self).get_config(connection_info, disk_info)
++        conf.source_type = 'network'
++        conf.source_protocol = 'vitastor'
++        conf.source_name = connection_info['data'].get('name')
++        conf.source_query = connection_info['data'].get('etcd_prefix') or None
++        conf.source_config = connection_info['data'].get('config_path') or None
++        conf.source_hosts = []
++        conf.source_ports = []
++        addresses = connection_info['data'].get('etcd_address', '')
++        if addresses:
++            if not isinstance(addresses, list):
++                addresses = addresses.split(',')
++            for addr in addresses:
++                if addr.startswith('https://'):
++                    raise NotImplementedError('Vitastor block driver does not support SSL for etcd communication yet')
++                if addr.startswith('http://'):
++                    addr = addr[7:]
++                addr = addr.rstrip('/')
++                if addr.endswith('/v3'):
++                    addr = addr[0:-3]
++                p = addr.find('/')
++                if p > 0:
++                    raise NotImplementedError('libvirt does not support custom URL paths for Vitastor etcd yet. Use /etc/vitastor/vitastor.conf')
++                p = addr.find(':')
++                port = '2379'
++                if p > 0:
++                    port = addr[p+1:]
++                    addr = addr[0:p]
++                conf.source_hosts.append(addr)
++                conf.source_ports.append(port)
++        return conf
++
++    def extend_volume(self, connection_info, instance, requested_size):
++        raise NotImplementedError

patches/nova-23.diff

@@ -1,5 +1,5 @@
 diff --git a/nova/virt/image/model.py b/nova/virt/image/model.py
-index 971f7e9c07..70ed70d5e2 100644
+index 971f7e9c07..ec3fca72cb 100644
 --- a/nova/virt/image/model.py
 +++ b/nova/virt/image/model.py
 @@ -129,3 +129,22 @@ class RBDImage(Image):
@@ -19,7 +19,7 @@ index 971f7e9c07..70ed70d5e2 100644
 +        :param etcd_prefix: etcd prefix (optional)
 +        :param config_path: path to the configuration (optional)
 +        """
-+        super(RBDImage, self).__init__(FORMAT_RAW)
++        super(VitastorImage, self).__init__(FORMAT_RAW)
 +
 +        self.name = name
 +        self.etcd_address = etcd_address
@@ -48,7 +48,7 @@ index 5358f3766a..ebe3d6effb 100644
  
      info = nova.privsep.qemu.privileged_qemu_img_info(path, format=format)
 diff --git a/nova/virt/libvirt/config.py b/nova/virt/libvirt/config.py
-index f9475776b3..51573fe41d 100644
+index f9475776b3..a2e18aab67 100644
 --- a/nova/virt/libvirt/config.py
 +++ b/nova/virt/libvirt/config.py
 @@ -1060,6 +1060,8 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
@@ -60,18 +60,19 @@ index f9475776b3..51573fe41d 100644
          self.source_name = None
          self.source_hosts = []
          self.source_ports = []
-@@ -1186,7 +1188,8 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
-         elif self.source_type == "mount":
-             dev.append(etree.Element("source", dir=self.source_path))
-         elif self.source_type == "network" and self.source_protocol:
--            source = etree.Element("source", protocol=self.source_protocol)
-+            source = etree.Element("source", protocol=self.source_protocol,
-+                query=self.source_query, config=self.source_config)
+@@ -1189,6 +1191,10 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
+             source = etree.Element("source", protocol=self.source_protocol)
              if self.source_name is not None:
                  source.set('name', self.source_name)
++            if self.source_query is not None:
++                source.set('query', self.source_query)
++            if self.source_config is not None:
++                source.append(etree.Element('config', file=self.source_config))
              hosts_info = zip(self.source_hosts, self.source_ports)
+             for name, port in hosts_info:
+                 host = etree.Element('host', name=name)
 diff --git a/nova/virt/libvirt/driver.py b/nova/virt/libvirt/driver.py
-index 391231c527..34dc60dcdd 100644
+index 391231c527..f38faa1608 100644
 --- a/nova/virt/libvirt/driver.py
 +++ b/nova/virt/libvirt/driver.py
 @@ -179,6 +179,7 @@ VOLUME_DRIVERS = {

patches/pve-qemu-5.1-vitastor.patch

@@ -0,0 +1,175 @@
+Index: pve-qemu-kvm-5.1.0/qapi/block-core.json
+===================================================================
+--- pve-qemu-kvm-5.1.0.orig/qapi/block-core.json
++++ pve-qemu-kvm-5.1.0/qapi/block-core.json
+@@ -3041,7 +3041,7 @@
+             'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
+             'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+-            'sheepdog', 'pbs',
++            'sheepdog', 'pbs', 'vitastor',
+             'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+@@ -3889,6 +3889,28 @@
+             '*tag': 'str' } }
+ 
+ ##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
++##
+ # @ReplicationMode:
+ #
+ # An enumeration of replication modes.
+@@ -4234,6 +4256,7 @@
+       'replication': { 'type': 'BlockdevOptionsReplication',
+                        'if': 'defined(CONFIG_REPLICATION)' },
+       'sheepdog':   'BlockdevOptionsSheepdog',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'ssh':        'BlockdevOptionsSsh',
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+@@ -4623,6 +4646,17 @@
+             '*cluster-size' :   'size' } }
+ 
+ ##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
++##
+ # @BlockdevVmdkSubformat:
+ #
+ # Subformat options for VMDK images
+@@ -4884,6 +4918,7 @@
+       'qed':            'BlockdevCreateOptionsQed',
+       'rbd':            'BlockdevCreateOptionsRbd',
+       'sheepdog':       'BlockdevCreateOptionsSheepdog',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
+Index: pve-qemu-kvm-5.1.0/configure
+===================================================================
+--- pve-qemu-kvm-5.1.0.orig/configure
++++ pve-qemu-kvm-5.1.0/configure
+@@ -446,6 +446,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ libusb=""
+ usb_redir=""
+@@ -1383,6 +1384,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1901,6 +1906,7 @@ disabled with --disable-FEATURE, default
+   vhost-vdpa      vhost-vdpa kernel backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -4234,6 +4240,27 @@ EOF
+ fi
+ 
+ ##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
++##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+   if $pkg_config --exists libssh; then
+@@ -6969,6 +6996,7 @@ echo "Trace output file $trace_file-<pid
+ fi
+ echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
+ echo "rbd support       $rbd"
++echo "vitastor support  $vitastor"
+ echo "xfsctl support    $xfs"
+ echo "smartcard support $smartcard"
+ echo "libusb            $libusb"
+@@ -7644,6 +7672,10 @@ if test "$rbd" = "yes" ; then
+   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=y" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+Index: pve-qemu-kvm-5.1.0/block/Makefile.objs
+===================================================================
+--- pve-qemu-kvm-5.1.0.orig/block/Makefile.objs
++++ pve-qemu-kvm-5.1.0/block/Makefile.objs
+@@ -32,6 +32,7 @@ block-obj-$(if $(CONFIG_LIBISCSI),y,n) +
+ block-obj-$(CONFIG_LIBNFS) += nfs.o
+ block-obj-$(CONFIG_CURL) += curl.o
+ block-obj-$(CONFIG_RBD) += rbd.o
++block-obj-$(CONFIG_VITASTOR) += vitastor.o
+ block-obj-$(CONFIG_GLUSTERFS) += gluster.o
+ block-obj-$(CONFIG_LIBSSH) += ssh.o
+ block-obj-y += backup-dump.o
+@@ -61,6 +62,8 @@ curl.o-cflags      := $(CURL_CFLAGS)
+ curl.o-libs        := $(CURL_LIBS)
+ rbd.o-cflags       := $(RBD_CFLAGS)
+ rbd.o-libs         := $(RBD_LIBS)
++vitastor.o-cflags  := $(VITASTOR_CFLAGS)
++vitastor.o-libs    := $(VITASTOR_LIBS)
+ gluster.o-cflags   := $(GLUSTERFS_CFLAGS)
+ gluster.o-libs     := $(GLUSTERFS_LIBS)
+ ssh.o-cflags       := $(LIBSSH_CFLAGS)

patches/pve-qemu-5.2-vitastor.patch

@@ -0,0 +1,181 @@
+Index: pve-qemu-kvm-5.2.0/qapi/block-core.json
+===================================================================
+--- pve-qemu-kvm-5.2.0.orig/qapi/block-core.json
++++ pve-qemu-kvm-5.2.0/qapi/block-core.json
+@@ -3076,7 +3076,7 @@
+             'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
+             'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+-            'sheepdog', 'pbs',
++            'sheepdog', 'pbs', 'vitastor',
+             'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+@@ -3924,6 +3924,28 @@
+             '*tag': 'str' } }
+ 
+ ##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
++##
+ # @ReplicationMode:
+ #
+ # An enumeration of replication modes.
+@@ -4272,6 +4294,7 @@
+       'replication': { 'type': 'BlockdevOptionsReplication',
+                        'if': 'defined(CONFIG_REPLICATION)' },
+       'sheepdog':   'BlockdevOptionsSheepdog',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'ssh':        'BlockdevOptionsSsh',
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+@@ -4662,6 +4685,17 @@
+             '*cluster-size' :   'size' } }
+ 
+ ##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
++##
+ # @BlockdevVmdkSubformat:
+ #
+ # Subformat options for VMDK images
+@@ -4923,6 +4957,7 @@
+       'qed':            'BlockdevCreateOptionsQed',
+       'rbd':            'BlockdevCreateOptionsRbd',
+       'sheepdog':       'BlockdevCreateOptionsSheepdog',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
+Index: pve-qemu-kvm-5.2.0/block/meson.build
+===================================================================
+--- pve-qemu-kvm-5.2.0.orig/block/meson.build
++++ pve-qemu-kvm-5.2.0/block/meson.build
+@@ -89,6 +89,7 @@ foreach m : [
+   ['CONFIG_LIBNFS', 'nfs', libnfs, 'nfs.c'],
+   ['CONFIG_LIBSSH', 'ssh', libssh, 'ssh.c'],
+   ['CONFIG_RBD', 'rbd', rbd, 'rbd.c'],
++  ['CONFIG_VITASTOR', 'vitastor', vitastor, 'vitastor.c'],
+ ]
+   if config_host.has_key(m[0])
+     if enable_modules
+Index: pve-qemu-kvm-5.2.0/configure
+===================================================================
+--- pve-qemu-kvm-5.2.0.orig/configure
++++ pve-qemu-kvm-5.2.0/configure
+@@ -372,6 +372,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ u2f="auto"
+ libusb=""
+@@ -1264,6 +1265,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1807,6 +1812,7 @@ disabled with --disable-FEATURE, default
+   vhost-vdpa      vhost-vdpa kernel backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -3700,6 +3706,27 @@ EOF
+ fi
+ 
+ ##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
++##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+   if $pkg_config --exists libssh; then
+@@ -6437,6 +6464,10 @@ if test "$rbd" = "yes" ; then
+   echo "CONFIG_RBD=y" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=y" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+Index: pve-qemu-kvm-5.2.0/meson.build
+===================================================================
+--- pve-qemu-kvm-5.2.0.orig/meson.build
++++ pve-qemu-kvm-5.2.0/meson.build
+@@ -596,6 +596,10 @@ rbd = not_found
+ if 'CONFIG_RBD' in config_host
+   rbd = declare_dependency(link_args: config_host['RBD_LIBS'].split())
+ endif
++vitastor = not_found
++if 'CONFIG_VITASTOR' in config_host
++  vitastor = declare_dependency(link_args: config_host['VITASTOR_LIBS'].split())
++endif
+ glusterfs = not_found
+ if 'CONFIG_GLUSTERFS' in config_host
+   glusterfs = declare_dependency(compile_args: config_host['GLUSTERFS_CFLAGS'].split(),
+@@ -2151,6 +2155,7 @@ endif
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       config_host.has_key('CONFIG_RBD')}
++summary_info += {'vitastor support':  config_host.has_key('CONFIG_VITASTOR')}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': config_host.has_key('CONFIG_SMARTCARD')}
+ summary_info += {'U2F support':       u2f.found()}

patches/pve-qemu-6.1-vitastor.patch

@@ -0,0 +1,188 @@
+Index: pve-qemu-kvm-6.1.0/qapi/block-core.json
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/qapi/block-core.json
++++ pve-qemu-kvm-6.1.0/qapi/block-core.json
+@@ -3084,7 +3084,7 @@
+             'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+             'pbs',
+-            'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
++            'ssh', 'throttle', 'vdi', 'vhdx', 'vitastor', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+ # @BlockdevOptionsFile:
+@@ -4020,6 +4020,28 @@
+             '*server': ['InetSocketAddressBase'] } }
+ 
+ ##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
++##
+ # @ReplicationMode:
+ #
+ # An enumeration of replication modes.
+@@ -4392,6 +4414,7 @@
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+       'vhdx':       'BlockdevOptionsGenericFormat',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'vmdk':       'BlockdevOptionsGenericCOWFormat',
+       'vpc':        'BlockdevOptionsGenericFormat',
+       'vvfat':      'BlockdevOptionsVVFAT'
+@@ -4782,6 +4805,17 @@
+             '*encrypt' :        'RbdEncryptionCreateOptions' } }
+ 
+ ##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
++##
+ # @BlockdevVmdkSubformat:
+ #
+ # Subformat options for VMDK images
+@@ -4977,6 +5011,7 @@
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'vmdk':           'BlockdevCreateOptionsVmdk',
+       'vpc':            'BlockdevCreateOptionsVpc'
+   } }
+Index: pve-qemu-kvm-6.1.0/block/meson.build
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/block/meson.build
++++ pve-qemu-kvm-6.1.0/block/meson.build
+@@ -91,6 +91,7 @@ foreach m : [
+   [libnfs, 'nfs', files('nfs.c')],
+   [libssh, 'ssh', files('ssh.c')],
+   [rbd, 'rbd', files('rbd.c')],
++  [vitastor, 'vitastor', files('vitastor.c')],
+ ]
+   if m[0].found()
+     module_ss = ss.source_set()
+Index: pve-qemu-kvm-6.1.0/configure
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/configure
++++ pve-qemu-kvm-6.1.0/configure
+@@ -375,6 +375,7 @@ trace_file="trace"
+ spice="$default_feature"
+ spice_protocol="auto"
+ rbd="auto"
++vitastor="auto"
+ smartcard="auto"
+ u2f="auto"
+ libusb="auto"
+@@ -1293,6 +1294,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="enabled"
+   ;;
++  --disable-vitastor) vitastor="disabled"
++  ;;
++  --enable-vitastor) vitastor="enabled"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1921,6 +1926,7 @@ disabled with --disable-FEATURE, default
+   spice           spice
+   spice-protocol  spice-protocol
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -5211,7 +5217,7 @@ if test "$skip_meson" = no; then
+         -Dcapstone=$capstone -Dslirp=$slirp -Dfdt=$fdt -Dbrlapi=$brlapi \
+         -Dcurl=$curl -Dglusterfs=$glusterfs -Dbzip2=$bzip2 -Dlibiscsi=$libiscsi \
+         -Dlibnfs=$libnfs -Diconv=$iconv -Dcurses=$curses -Dlibudev=$libudev\
+-        -Drbd=$rbd -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse -Dlibxml2=$libxml2 \
++        -Drbd=$rbd -Dvitastor=$vitastor -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse -Dlibxml2=$libxml2 \
+         -Dlibdaxctl=$libdaxctl -Dlibpmem=$libpmem -Dlinux_io_uring=$linux_io_uring \
+         -Dgnutls=$gnutls -Dnettle=$nettle -Dgcrypt=$gcrypt -Dauth_pam=$auth_pam \
+         -Dzstd=$zstd -Dseccomp=$seccomp -Dvirtfs=$virtfs -Dcap_ng=$cap_ng \
+Index: pve-qemu-kvm-6.1.0/meson.build
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/meson.build
++++ pve-qemu-kvm-6.1.0/meson.build
+@@ -729,6 +729,26 @@ if not get_option('rbd').auto() or have_
+   endif
+ endif
+ 
++vitastor = not_found
++if not get_option('vitastor').auto() or have_block
++  libvitastor_client = cc.find_library('vitastor_client', has_headers: ['vitastor_c.h'],
++    required: get_option('vitastor'), kwargs: static_kwargs)
++  if libvitastor_client.found()
++    if cc.links('''
++      #include <vitastor_c.h>
++      int main(void) {
++        vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++        return 0;
++      }''', dependencies: libvitastor_client)
++      vitastor = declare_dependency(dependencies: libvitastor_client)
++    elif get_option('vitastor').enabled()
++      error('could not link libvitastor_client')
++    else
++      warning('could not link libvitastor_client, disabling')
++    endif
++  endif
++endif
++
+ glusterfs = not_found
+ glusterfs_ftruncate_has_stat = false
+ glusterfs_iocb_has_stat = false
+@@ -1268,6 +1288,7 @@ config_host_data.set('CONFIG_LIBNFS', li
+ config_host_data.set('CONFIG_LINUX_IO_URING', linux_io_uring.found())
+ config_host_data.set('CONFIG_LIBPMEM', libpmem.found())
+ config_host_data.set('CONFIG_RBD', rbd.found())
++config_host_data.set('CONFIG_VITASTOR', vitastor.found())
+ config_host_data.set('CONFIG_SDL', sdl.found())
+ config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
+ config_host_data.set('CONFIG_SECCOMP', seccomp.found())
+@@ -3087,6 +3108,7 @@ summary_info += {'bpf support': libbpf.f
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       rbd.found()}
++summary_info += {'vitastor support':  vitastor.found()}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': cacard.found()}
+ summary_info += {'U2F support':       u2f.found()}
+Index: pve-qemu-kvm-6.1.0/meson_options.txt
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/meson_options.txt
++++ pve-qemu-kvm-6.1.0/meson_options.txt
+@@ -102,6 +102,8 @@ option('lzo', type : 'feature', value :
+        description: 'lzo compression support')
+ option('rbd', type : 'feature', value : 'auto',
+        description: 'Ceph block device driver')
++option('vitastor', type : 'feature', value : 'auto',
++       description: 'Vitastor block device driver')
+ option('gtk', type : 'feature', value : 'auto',
+        description: 'GTK+ user interface')
+ option('sdl', type : 'feature', value : 'auto',

patches/qemu-3.1-vitastor.patch

@@ -1,7 +1,107 @@
-Index: qemu-3.1+dfsg/qapi/block-core.json
-===================================================================
---- qemu-3.1+dfsg.orig/qapi/block-core.json
-+++ qemu-3.1+dfsg/qapi/block-core.json
+diff --git a/block/Makefile.objs b/block/Makefile.objs
+index 46d585cfd0..62222f25fe 100644
+--- a/block/Makefile.objs
++++ b/block/Makefile.objs
+@@ -29,6 +29,7 @@ block-obj-$(if $(CONFIG_LIBISCSI),y,n) += iscsi-opts.o
+ block-obj-$(CONFIG_LIBNFS) += nfs.o
+ block-obj-$(CONFIG_CURL) += curl.o
+ block-obj-$(CONFIG_RBD) += rbd.o
++block-obj-$(CONFIG_VITASTOR) += vitastor.o
+ block-obj-$(CONFIG_GLUSTERFS) += gluster.o
+ block-obj-$(CONFIG_VXHS) += vxhs.o
+ block-obj-$(CONFIG_LIBSSH2) += ssh.o
+@@ -49,6 +50,8 @@ curl.o-cflags      := $(CURL_CFLAGS)
+ curl.o-libs        := $(CURL_LIBS)
+ rbd.o-cflags       := $(RBD_CFLAGS)
+ rbd.o-libs         := $(RBD_LIBS)
++vitastor.o-cflags  := $(VITASTOR_CFLAGS)
++vitastor.o-libs    := $(VITASTOR_LIBS)
+ gluster.o-cflags   := $(GLUSTERFS_CFLAGS)
+ gluster.o-libs     := $(GLUSTERFS_LIBS)
+ vxhs.o-libs        := $(VXHS_LIBS)
+diff --git a/configure b/configure
+index 1c9f6090e8..25ef89c33a 100755
+--- a/configure
++++ b/configure
+@@ -422,6 +422,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ libusb=""
+ usb_redir=""
+@@ -1282,6 +1283,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1737,6 +1742,7 @@ disabled with --disable-FEATURE, default is enabled if available:
+   vhost-crypto    vhost-crypto acceleration support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -3722,6 +3728,27 @@ EOF
+   fi
+ fi
+ 
++##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
+ ##########################################
+ # libssh2 probe
+ min_libssh2_version=1.2.8
+@@ -6109,6 +6136,7 @@ echo "Trace output file $trace_file-<pid>"
+ fi
+ echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
+ echo "rbd support       $rbd"
++echo "vitastor support  $vitastor"
+ echo "xfsctl support    $xfs"
+ echo "smartcard support $smartcard"
+ echo "libusb            $libusb"
+@@ -6694,6 +6722,11 @@ if test "$rbd" = "yes" ; then
+   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=m" >> $config_host_mak
++  echo "VITASTOR_CFLAGS=$vitastor_cflags" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index d4fe710836..dbad3327b3 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
 @@ -2617,7 +2617,7 @@
  ##
  { 'enum': 'BlockdevDriver',
@@ -11,10 +111,11 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
              'host_cdrom', 'host_device', 'http', 'https', 'iscsi', 'luks',
              'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels', 'qcow',
              'qcow2', 'qed', 'quorum', 'raw', 'rbd', 'replication', 'sheepdog',
-@@ -3367,6 +3367,28 @@
+@@ -3366,6 +3366,28 @@
+             '*snap-id': 'uint32',
              '*tag': 'str' } }
  
- ##
++##
 +# @BlockdevOptionsVitastor:
 +#
 +# Driver specific block device options for vitastor
@@ -36,11 +137,10 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
 +            '*etcd-host': 'str',
 +            '*etcd-prefix': 'str' } }
 +
-+##
+ ##
  # @ReplicationMode:
  #
- # An enumeration of replication modes.
-@@ -3713,6 +3731,7 @@
+@@ -3713,6 +3735,7 @@
        'rbd':        'BlockdevOptionsRbd',
        'replication':'BlockdevOptionsReplication',
        'sheepdog':   'BlockdevOptionsSheepdog',
@@ -48,10 +148,11 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
        'ssh':        'BlockdevOptionsSsh',
        'throttle':   'BlockdevOptionsThrottle',
        'vdi':        'BlockdevOptionsGenericFormat',
-@@ -4158,6 +4177,17 @@
+@@ -4157,6 +4180,17 @@
+             '*subformat':           'BlockdevVhdxSubformat',
              '*block-state-zero':    'bool' } }
  
- ##
++##
 +# @BlockdevCreateOptionsVitastor:
 +#
 +# Driver specific image creation options for Vitastor.
@@ -62,11 +163,10 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
 +  'data': { 'location':         'BlockdevOptionsVitastor',
 +            'size':             'size' } }
 +
-+##
+ ##
  # @BlockdevVpcSubformat:
  #
- # @dynamic: Growing image file
-@@ -4212,6 +4242,7 @@
+@@ -4212,6 +4246,7 @@
        'qed':            'BlockdevCreateOptionsQed',
        'rbd':            'BlockdevCreateOptionsRbd',
        'sheepdog':       'BlockdevCreateOptionsSheepdog',
@@ -74,15 +174,3 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
        'ssh':            'BlockdevCreateOptionsSsh',
        'vdi':            'BlockdevCreateOptionsVdi',
        'vhdx':           'BlockdevCreateOptionsVhdx',
-Index: qemu-3.1+dfsg/scripts/modules/module_block.py
-===================================================================
---- qemu-3.1+dfsg.orig/scripts/modules/module_block.py
-+++ qemu-3.1+dfsg/scripts/modules/module_block.py
-@@ -88,6 +88,7 @@ def print_bottom(fheader):
- output_file = sys.argv[1]
- with open(output_file, 'w') as fheader:
-     print_top(fheader)
-+    add_module(fheader, "vitastor", "vitastor", "vitastor")
- 
-     for filename in sys.argv[2:]:
-         if os.path.isfile(filename):

patches/qemu-4.2-vitastor.patch

@@ -1,8 +1,105 @@
-Index: qemu/qapi/block-core.json
-===================================================================
---- qemu.orig/qapi/block-core.json	2020-11-07 22:57:38.932613674 +0000
-+++ qemu.orig/qapi/block-core.json	2020-11-07 22:59:49.890722862 +0000
-@@ -2907,7 +2907,7 @@
+diff -NaurpbB qemu-4.2.0/block/Makefile.objs qemu-4.2.0-vitastor/block/Makefile.objs
+--- qemu-4.2.0/block/Makefile.objs	2019-12-12 18:20:47.000000000 +0000
++++ qemu-4.2.0-vitastor/block/Makefile.objs	2021-12-01 21:28:47.342341760 +0000
+@@ -29,6 +29,7 @@ block-obj-$(if $(CONFIG_LIBISCSI),y,n) +
+ block-obj-$(CONFIG_LIBNFS) += nfs.o
+ block-obj-$(CONFIG_CURL) += curl.o
+ block-obj-$(CONFIG_RBD) += rbd.o
++block-obj-$(CONFIG_VITASTOR) += vitastor.o
+ block-obj-$(CONFIG_GLUSTERFS) += gluster.o
+ block-obj-$(CONFIG_VXHS) += vxhs.o
+ block-obj-$(CONFIG_LIBSSH) += ssh.o
+@@ -53,6 +54,8 @@ curl.o-cflags      := $(CURL_CFLAGS)
+ curl.o-libs        := $(CURL_LIBS)
+ rbd.o-cflags       := $(RBD_CFLAGS)
+ rbd.o-libs         := $(RBD_LIBS)
++vitastor.o-cflags  := $(VITASTOR_CFLAGS)
++vitastor.o-libs    := $(VITASTOR_LIBS)
+ gluster.o-cflags   := $(GLUSTERFS_CFLAGS)
+ gluster.o-libs     := $(GLUSTERFS_LIBS)
+ vxhs.o-libs        := $(VXHS_LIBS)
+diff -NaurpbB qemu-4.2.0/configure qemu-4.2.0-vitastor/configure
+--- qemu-4.2.0/configure	2019-12-12 18:20:47.000000000 +0000
++++ qemu-4.2.0-vitastor/configure	2021-12-01 21:30:24.605237562 +0000
+@@ -435,6 +435,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ libusb=""
+ usb_redir=""
+@@ -1312,6 +1313,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1782,6 +1787,7 @@ disabled with --disable-FEATURE, default
+   vhost-user      vhost-user backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -3980,6 +3986,27 @@ EOF
+ fi
+ 
+ ##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
++##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+   if $pkg_config --exists libssh; then
+@@ -6549,6 +6576,7 @@ echo "Trace output file $trace_file-<pid
+ fi
+ echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
+ echo "rbd support       $rbd"
++echo "vitastor support  $vitastor"
+ echo "xfsctl support    $xfs"
+ echo "smartcard support $smartcard"
+ echo "libusb            $libusb"
+@@ -7182,6 +7210,11 @@ if test "$rbd" = "yes" ; then
+   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=m" >> $config_host_mak
++  echo "VITASTOR_CFLAGS=$vitastor_cflags" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+diff -NaurpbB qemu-4.2.0/qapi/block-core.json qemu-4.2.0-vitastor/qapi/block-core.json
+--- qemu-4.2.0/qapi/block-core.json	2019-12-12 18:20:48.000000000 +0000
++++ qemu-4.2.0-vitastor/qapi/block-core.json	2021-12-01 21:27:49.213574396 +0000
+@@ -2894,7 +2894,7 @@
              'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels', 'qcow',
              'qcow2', 'qed', 'quorum', 'raw', 'rbd',
              { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
@@ -11,7 +108,7 @@ Index: qemu/qapi/block-core.json
              'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat', 'vxhs' ] }
  
  ##
-@@ -3725,6 +3725,28 @@
+@@ -3712,6 +3712,28 @@
              '*tag': 'str' } }
  
  ##
@@ -40,7 +137,7 @@ Index: qemu/qapi/block-core.json
  # @ReplicationMode:
  #
  # An enumeration of replication modes.
-@@ -4084,6 +4102,7 @@
+@@ -4071,6 +4093,7 @@
        'replication': { 'type': 'BlockdevOptionsReplication',
                         'if': 'defined(CONFIG_REPLICATION)' },
        'sheepdog':   'BlockdevOptionsSheepdog',
@@ -48,7 +145,7 @@ Index: qemu/qapi/block-core.json
        'ssh':        'BlockdevOptionsSsh',
        'throttle':   'BlockdevOptionsThrottle',
        'vdi':        'BlockdevOptionsGenericFormat',
-@@ -4461,6 +4480,17 @@
+@@ -4441,6 +4464,17 @@
              '*cluster-size' :   'size' } }
  
  ##
@@ -66,7 +163,7 @@ Index: qemu/qapi/block-core.json
  # @BlockdevVmdkSubformat:
  #
  # Subformat options for VMDK images
-@@ -4722,6 +4752,7 @@
+@@ -4702,6 +4736,7 @@
        'qed':            'BlockdevCreateOptionsQed',
        'rbd':            'BlockdevCreateOptionsRbd',
        'sheepdog':       'BlockdevCreateOptionsSheepdog',
@@ -74,15 +171,3 @@ Index: qemu/qapi/block-core.json
        'ssh':            'BlockdevCreateOptionsSsh',
        'vdi':            'BlockdevCreateOptionsVdi',
        'vhdx':           'BlockdevCreateOptionsVhdx',
-Index: qemu/scripts/modules/module_block.py
-===================================================================
---- qemu.orig/scripts/modules/module_block.py	2020-11-07 22:57:38.936613739 +0000
-+++ qemu/scripts/modules/module_block.py	2020-11-07 22:59:49.890722862 +0000
-@@ -86,6 +86,7 @@ def print_bottom(fheader):
- output_file = sys.argv[1]
- with open(output_file, 'w') as fheader:
-     print_top(fheader)
-+    add_module(fheader, "vitastor", "vitastor", "vitastor")
- 
-     for filename in sys.argv[2:]:
-         if os.path.isfile(filename):

patches/qemu-5.0-vitastor.patch

@@ -1,7 +1,107 @@
-Index: qemu/qapi/block-core.json
-===================================================================
---- qemu.orig/qapi/block-core.json
-+++ qemu/qapi/block-core.json
+diff --git a/block/Makefile.objs b/block/Makefile.objs
+index 3635b6b4c1..6cdf6df6ff 100644
+--- a/block/Makefile.objs
++++ b/block/Makefile.objs
+@@ -30,6 +30,7 @@ block-obj-$(if $(CONFIG_LIBISCSI),y,n) += iscsi-opts.o
+ block-obj-$(CONFIG_LIBNFS) += nfs.o
+ block-obj-$(CONFIG_CURL) += curl.o
+ block-obj-$(CONFIG_RBD) += rbd.o
++block-obj-$(CONFIG_VITASTOR) += vitastor.o
+ block-obj-$(CONFIG_GLUSTERFS) += gluster.o
+ block-obj-$(CONFIG_VXHS) += vxhs.o
+ block-obj-$(CONFIG_LIBSSH) += ssh.o
+@@ -58,6 +59,8 @@ curl.o-cflags      := $(CURL_CFLAGS)
+ curl.o-libs        := $(CURL_LIBS)
+ rbd.o-cflags       := $(RBD_CFLAGS)
+ rbd.o-libs         := $(RBD_LIBS)
++vitastor.o-cflags  := $(VITASTOR_CFLAGS)
++vitastor.o-libs    := $(VITASTOR_LIBS)
+ gluster.o-cflags   := $(GLUSTERFS_CFLAGS)
+ gluster.o-libs     := $(GLUSTERFS_LIBS)
+ vxhs.o-libs        := $(VXHS_LIBS)
+diff --git a/configure b/configure
+index 23b5e93752..7400cb9546 100755
+--- a/configure
++++ b/configure
+@@ -438,6 +438,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ libusb=""
+ usb_redir=""
+@@ -1355,6 +1356,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1848,6 +1853,7 @@ disabled with --disable-FEATURE, default is enabled if available:
+   vhost-user      vhost-user backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -4088,6 +4094,27 @@ EOF
+   fi
+ fi
+ 
++##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
+ ##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+@@ -6679,6 +6706,7 @@ echo "Trace output file $trace_file-<pid>"
+ fi
+ echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
+ echo "rbd support       $rbd"
++echo "vitastor support  $vitastor"
+ echo "xfsctl support    $xfs"
+ echo "smartcard support $smartcard"
+ echo "libusb            $libusb"
+@@ -7329,6 +7357,11 @@ if test "$rbd" = "yes" ; then
+   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=m" >> $config_host_mak
++  echo "VITASTOR_CFLAGS=$vitastor_cflags" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index 943df1926a..c4f23230a3 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
 @@ -2798,7 +2798,7 @@
              'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
              'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
@@ -11,10 +111,11 @@ Index: qemu/qapi/block-core.json
              'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat', 'vxhs' ] }
  
  ##
-@@ -3635,6 +3635,28 @@
+@@ -3634,6 +3634,28 @@
+             '*snap-id': 'uint32',
              '*tag': 'str' } }
  
- ##
++##
 +# @BlockdevOptionsVitastor:
 +#
 +# Driver specific block device options for vitastor
@@ -36,11 +137,10 @@ Index: qemu/qapi/block-core.json
 +            '*etcd-host': 'str',
 +            '*etcd-prefix': 'str' } }
 +
-+##
+ ##
  # @ReplicationMode:
  #
- # An enumeration of replication modes.
-@@ -3995,6 +4013,7 @@
+@@ -3995,6 +4017,7 @@
        'replication': { 'type': 'BlockdevOptionsReplication',
                         'if': 'defined(CONFIG_REPLICATION)' },
        'sheepdog':   'BlockdevOptionsSheepdog',
@@ -48,10 +148,11 @@ Index: qemu/qapi/block-core.json
        'ssh':        'BlockdevOptionsSsh',
        'throttle':   'BlockdevOptionsThrottle',
        'vdi':        'BlockdevOptionsGenericFormat',
-@@ -4365,6 +4384,17 @@
+@@ -4364,6 +4387,17 @@
+             'size':             'size',
              '*cluster-size' :   'size' } }
  
- ##
++##
 +# @BlockdevCreateOptionsVitastor:
 +#
 +# Driver specific image creation options for Vitastor.
@@ -62,11 +163,10 @@ Index: qemu/qapi/block-core.json
 +  'data': { 'location':         'BlockdevOptionsVitastor',
 +            'size':             'size' } }
 +
-+##
+ ##
  # @BlockdevVmdkSubformat:
  #
- # Subformat options for VMDK images
-@@ -4626,6 +4656,7 @@
+@@ -4626,6 +4660,7 @@
        'qed':            'BlockdevCreateOptionsQed',
        'rbd':            'BlockdevCreateOptionsRbd',
        'sheepdog':       'BlockdevCreateOptionsSheepdog',
@@ -74,15 +174,3 @@ Index: qemu/qapi/block-core.json
        'ssh':            'BlockdevCreateOptionsSsh',
        'vdi':            'BlockdevCreateOptionsVdi',
        'vhdx':           'BlockdevCreateOptionsVhdx',
-Index: qemu/scripts/modules/module_block.py
-===================================================================
---- qemu.orig/scripts/modules/module_block.py
-+++ qemu/scripts/modules/module_block.py
-@@ -85,6 +85,7 @@ def print_bottom(fheader):
- output_file = sys.argv[1]
- with open(output_file, 'w') as fheader:
-     print_top(fheader)
-+    add_module(fheader, "vitastor", "vitastor", "vitastor")
- 
-     for filename in sys.argv[2:]:
-         if os.path.isfile(filename):

patches/qemu-5.1-vitastor.patch

@@ -1,8 +1,8 @@
-Index: qemu-5.1+dfsg/qapi/block-core.json
+Index: qemu-5.2+dfsg/qapi/block-core.json
 ===================================================================
---- qemu-5.1+dfsg.orig/qapi/block-core.json
-+++ qemu-5.1+dfsg/qapi/block-core.json
-@@ -2807,7 +2807,7 @@
+--- qemu-5.2+dfsg.orig/qapi/block-core.json
++++ qemu-5.2+dfsg/qapi/block-core.json
+@@ -2831,7 +2831,7 @@
              'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
              'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
              { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
@@ -11,7 +11,7 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
              'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
  
  ##
-@@ -3644,6 +3644,28 @@
+@@ -3668,6 +3668,28 @@
              '*tag': 'str' } }
  
  ##
@@ -40,7 +40,7 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
  # @ReplicationMode:
  #
  # An enumeration of replication modes.
-@@ -3988,6 +4006,7 @@
+@@ -4015,6 +4037,7 @@
        'replication': { 'type': 'BlockdevOptionsReplication',
                         'if': 'defined(CONFIG_REPLICATION)' },
        'sheepdog':   'BlockdevOptionsSheepdog',
@@ -48,7 +48,7 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
        'ssh':        'BlockdevOptionsSsh',
        'throttle':   'BlockdevOptionsThrottle',
        'vdi':        'BlockdevOptionsGenericFormat',
-@@ -4376,6 +4395,17 @@
+@@ -4404,6 +4427,17 @@
              '*cluster-size' :   'size' } }
  
  ##
@@ -66,7 +66,7 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
  # @BlockdevVmdkSubformat:
  #
  # Subformat options for VMDK images
-@@ -4637,6 +4667,7 @@
+@@ -4665,6 +4699,7 @@
        'qed':            'BlockdevCreateOptionsQed',
        'rbd':            'BlockdevCreateOptionsRbd',
        'sheepdog':       'BlockdevCreateOptionsSheepdog',
@@ -74,15 +74,108 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
        'ssh':            'BlockdevCreateOptionsSsh',
        'vdi':            'BlockdevCreateOptionsVdi',
        'vhdx':           'BlockdevCreateOptionsVhdx',
-Index: qemu-5.1+dfsg/scripts/modules/module_block.py
+Index: qemu-5.2+dfsg/block/meson.build
 ===================================================================
---- qemu-5.1+dfsg.orig/scripts/modules/module_block.py
-+++ qemu-5.1+dfsg/scripts/modules/module_block.py
-@@ -86,6 +86,7 @@ if __name__ == '__main__':
-     output_file = sys.argv[1]
-     with open(output_file, 'w') as fheader:
-         print_top(fheader)
-+        add_module(fheader, "vitastor", "vitastor", "vitastor")
+--- qemu-5.2+dfsg.orig/block/meson.build
++++ qemu-5.2+dfsg/block/meson.build
+@@ -76,6 +76,7 @@ foreach m : [
+   ['CONFIG_LIBNFS', 'nfs', libnfs, 'nfs.c'],
+   ['CONFIG_LIBSSH', 'ssh', libssh, 'ssh.c'],
+   ['CONFIG_RBD', 'rbd', rbd, 'rbd.c'],
++  ['CONFIG_VITASTOR', 'vitastor', vitastor, 'vitastor.c'],
+ ]
+   if config_host.has_key(m[0])
+     if enable_modules
+Index: qemu-5.2+dfsg/configure
+===================================================================
+--- qemu-5.2+dfsg.orig/configure
++++ qemu-5.2+dfsg/configure
+@@ -372,6 +372,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ u2f="auto"
+ libusb=""
+@@ -1263,6 +1264,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1827,6 +1832,7 @@ disabled with --disable-FEATURE, default
+   vhost-vdpa      vhost-vdpa kernel backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -3719,6 +3725,27 @@ EOF
+ fi
  
-         for filename in sys.argv[2:]:
-             if os.path.isfile(filename):
+ ##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
++##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+   if $pkg_config --exists libssh; then
+@@ -6456,6 +6483,10 @@ if test "$rbd" = "yes" ; then
+   echo "CONFIG_RBD=y" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=y" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+Index: qemu-5.2+dfsg/meson.build
+===================================================================
+--- qemu-5.2+dfsg.orig/meson.build
++++ qemu-5.2+dfsg/meson.build
+@@ -596,6 +596,10 @@ rbd = not_found
+ if 'CONFIG_RBD' in config_host
+   rbd = declare_dependency(link_args: config_host['RBD_LIBS'].split())
+ endif
++vitastor = not_found
++if 'CONFIG_VITASTOR' in config_host
++  vitastor = declare_dependency(link_args: config_host['VITASTOR_LIBS'].split())
++endif
+ glusterfs = not_found
+ if 'CONFIG_GLUSTERFS' in config_host
+   glusterfs = declare_dependency(compile_args: config_host['GLUSTERFS_CFLAGS'].split(),
+@@ -2145,6 +2149,7 @@ endif
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       config_host.has_key('CONFIG_RBD')}
++summary_info += {'vitastor support':  config_host.has_key('CONFIG_VITASTOR')}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': config_host.has_key('CONFIG_SMARTCARD')}
+ summary_info += {'U2F support':       u2f.found()}

patches/qemu-6.0-vitastor.patch

@@ -0,0 +1,188 @@
+diff --git a/block/meson.build b/block/meson.build
+index d21990ec95..385ac37732 100644
+--- a/block/meson.build
++++ b/block/meson.build
+@@ -78,6 +78,7 @@ foreach m : [
+   [libnfs, 'nfs', libnfs, 'nfs.c'],
+   [libssh, 'ssh', libssh, 'ssh.c'],
+   [rbd, 'rbd', rbd, 'rbd.c'],
++  [vitastor, 'vitastor', vitastor, 'vitastor.c'],
+ ]
+   if m[0].found()
+     if enable_modules
+diff --git a/configure b/configure
+index c77f7b1020..5f534e8484 100755
+--- a/configure
++++ b/configure
+@@ -389,6 +389,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice="$default_feature"
+ rbd="auto"
++vitastor="auto"
+ smartcard="$default_feature"
+ u2f="auto"
+ libusb="$default_feature"
+@@ -1280,6 +1281,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="enabled"
+   ;;
++  --disable-vitastor) vitastor="disabled"
++  ;;
++  --enable-vitastor) vitastor="enabled"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1867,6 +1872,7 @@ disabled with --disable-FEATURE, default is enabled if available
+   vhost-vdpa      vhost-vdpa kernel backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -6423,7 +6429,7 @@ NINJA=$ninja $meson setup \
+         -Dcapstone=$capstone -Dslirp=$slirp -Dfdt=$fdt -Dbrlapi=$brlapi \
+         -Dcurl=$curl -Dglusterfs=$glusterfs -Dbzip2=$bzip2 -Dlibiscsi=$libiscsi \
+         -Dlibnfs=$libnfs -Diconv=$iconv -Dcurses=$curses -Dlibudev=$libudev\
+-        -Drbd=$rbd -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse \
++        -Drbd=$rbd -Dvitastor=$vitastor -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse \
+         -Dzstd=$zstd -Dseccomp=$seccomp -Dvirtfs=$virtfs -Dcap_ng=$cap_ng \
+         -Dattr=$attr -Ddefault_devices=$default_devices \
+         -Ddocs=$docs -Dsphinx_build=$sphinx_build -Dinstall_blobs=$blobs \
+diff --git a/meson.build b/meson.build
+index c6f4b0cf5e..3dc7f7b463 100644
+--- a/meson.build
++++ b/meson.build
+@@ -720,6 +720,26 @@ if not get_option('rbd').auto() or have_block
+   endif
+ endif
+ 
++vitastor = not_found
++if not get_option('vitastor').auto() or have_block
++  libvitastor_client = cc.find_library('vitastor_client', has_headers: ['vitastor_c.h'],
++    required: get_option('vitastor'), kwargs: static_kwargs)
++  if libvitastor_client.found()
++    if cc.links('''
++      #include <vitastor_c.h>
++      int main(void) {
++        vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++        return 0;
++      }''', dependencies: libvitastor_client)
++      vitastor = declare_dependency(dependencies: libvitastor_client)
++    elif get_option('vitastor').enabled()
++      error('could not link libvitastor_client')
++    else
++      warning('could not link libvitastor_client, disabling')
++    endif
++  endif
++endif
++
+ glusterfs = not_found
+ glusterfs_ftruncate_has_stat = false
+ glusterfs_iocb_has_stat = false
+@@ -1118,6 +1138,7 @@ config_host_data.set('CONFIG_LIBCAP_NG', libcap_ng.found())
+ config_host_data.set('CONFIG_LIBISCSI', libiscsi.found())
+ config_host_data.set('CONFIG_LIBNFS', libnfs.found())
+ config_host_data.set('CONFIG_RBD', rbd.found())
++config_host_data.set('CONFIG_VITASTOR', vitastor.found())
+ config_host_data.set('CONFIG_SDL', sdl.found())
+ config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
+ config_host_data.set('CONFIG_SECCOMP', seccomp.found())
+@@ -2683,6 +2704,7 @@ summary_info += {'libcap-ng support': libcap_ng.found()}
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       rbd.found()}
++summary_info += {'vitastor support':  vitastor.found()}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': config_host.has_key('CONFIG_SMARTCARD')}
+ summary_info += {'U2F support':       u2f.found()}
+diff --git a/meson_options.txt b/meson_options.txt
+index 9734019995..bc93963b27 100644
+--- a/meson_options.txt
++++ b/meson_options.txt
+@@ -80,6 +80,8 @@ option('lzo', type : 'feature', value : 'auto',
+        description: 'lzo compression support')
+ option('rbd', type : 'feature', value : 'auto',
+        description: 'Ceph block device driver')
++option('vitastor', type : 'feature', value : 'auto',
++       description: 'Vitastor block device driver')
+ option('gtk', type : 'feature', value : 'auto',
+        description: 'GTK+ user interface')
+ option('sdl', type : 'feature', value : 'auto',
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index 6d227924d0..d14b29aa43 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -2819,7 +2819,7 @@
+             'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+             'sheepdog',
+-            'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
++            'ssh', 'throttle', 'vdi', 'vhdx', 'vitastor', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+ # @BlockdevOptionsFile:
+@@ -3671,6 +3671,28 @@
+             '*snap-id': 'uint32',
+             '*tag': 'str' } }
+ 
++##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
+ ##
+ # @ReplicationMode:
+ #
+@@ -4042,6 +4064,7 @@
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+       'vhdx':       'BlockdevOptionsGenericFormat',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'vmdk':       'BlockdevOptionsGenericCOWFormat',
+       'vpc':        'BlockdevOptionsGenericFormat',
+       'vvfat':      'BlockdevOptionsVVFAT'
+@@ -4426,6 +4449,17 @@
+             'size':             'size',
+             '*cluster-size' :   'size' } }
+ 
++##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
+ ##
+ # @BlockdevVmdkSubformat:
+ #
+@@ -4691,6 +4725,7 @@
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'vmdk':           'BlockdevCreateOptionsVmdk',
+       'vpc':            'BlockdevCreateOptionsVpc'
+   } }

patches/qemu-6.1-vitastor.patch

@@ -74,15 +74,115 @@ Index: qemu-6.1+dfsg/qapi/block-core.json
        'vmdk':           'BlockdevCreateOptionsVmdk',
        'vpc':            'BlockdevCreateOptionsVpc'
    } }
-Index: qemu-6.1+dfsg/scripts/modules/module_block.py
+Index: qemu-6.1+dfsg/block/meson.build
 ===================================================================
---- qemu-6.1+dfsg.orig/scripts/modules/module_block.py
-+++ qemu-6.1+dfsg/scripts/modules/module_block.py
-@@ -86,6 +86,7 @@ if __name__ == '__main__':
-     output_file = sys.argv[1]
-     with open(output_file, 'w') as fheader:
-         print_top(fheader)
-+        add_module(fheader, "vitastor", "vitastor", "vitastor")
+--- qemu-6.1+dfsg.orig/block/meson.build
++++ qemu-6.1+dfsg/block/meson.build
+@@ -78,6 +78,7 @@ foreach m : [
+   [libnfs, 'nfs', files('nfs.c')],
+   [libssh, 'ssh', files('ssh.c')],
+   [rbd, 'rbd', files('rbd.c')],
++  [vitastor, 'vitastor', files('vitastor.c')],
+ ]
+   if m[0].found()
+     module_ss = ss.source_set()
+Index: qemu-6.1+dfsg/configure
+===================================================================
+--- qemu-6.1+dfsg.orig/configure
++++ qemu-6.1+dfsg/configure
+@@ -375,6 +375,7 @@ trace_file="trace"
+ spice="$default_feature"
+ spice_protocol="auto"
+ rbd="auto"
++vitastor="auto"
+ smartcard="auto"
+ u2f="auto"
+ libusb="auto"
+@@ -1292,6 +1293,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="enabled"
+   ;;
++  --disable-vitastor) vitastor="disabled"
++  ;;
++  --enable-vitastor) vitastor="enabled"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1916,6 +1921,7 @@ disabled with --disable-FEATURE, default
+   spice           spice
+   spice-protocol  spice-protocol
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -5202,7 +5208,7 @@ if test "$skip_meson" = no; then
+         -Dcapstone=$capstone -Dslirp=$slirp -Dfdt=$fdt -Dbrlapi=$brlapi \
+         -Dcurl=$curl -Dglusterfs=$glusterfs -Dbzip2=$bzip2 -Dlibiscsi=$libiscsi \
+         -Dlibnfs=$libnfs -Diconv=$iconv -Dcurses=$curses -Dlibudev=$libudev\
+-        -Drbd=$rbd -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse -Dlibxml2=$libxml2 \
++        -Drbd=$rbd -Dvitastor=$vitastor -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse -Dlibxml2=$libxml2 \
+         -Dlibdaxctl=$libdaxctl -Dlibpmem=$libpmem -Dlinux_io_uring=$linux_io_uring \
+         -Dgnutls=$gnutls -Dnettle=$nettle -Dgcrypt=$gcrypt -Dauth_pam=$auth_pam \
+         -Dzstd=$zstd -Dseccomp=$seccomp -Dvirtfs=$virtfs -Dcap_ng=$cap_ng \
+Index: qemu-6.1+dfsg/meson.build
+===================================================================
+--- qemu-6.1+dfsg.orig/meson.build
++++ qemu-6.1+dfsg/meson.build
+@@ -729,6 +729,26 @@ if not get_option('rbd').auto() or have_
+   endif
+ endif
  
-         for filename in sys.argv[2:]:
-             if os.path.isfile(filename):
++vitastor = not_found
++if not get_option('vitastor').auto() or have_block
++  libvitastor_client = cc.find_library('vitastor_client', has_headers: ['vitastor_c.h'],
++    required: get_option('vitastor'), kwargs: static_kwargs)
++  if libvitastor_client.found()
++    if cc.links('''
++      #include <vitastor_c.h>
++      int main(void) {
++        vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++        return 0;
++      }''', dependencies: libvitastor_client)
++      vitastor = declare_dependency(dependencies: libvitastor_client)
++    elif get_option('vitastor').enabled()
++      error('could not link libvitastor_client')
++    else
++      warning('could not link libvitastor_client, disabling')
++    endif
++  endif
++endif
++
+ glusterfs = not_found
+ glusterfs_ftruncate_has_stat = false
+ glusterfs_iocb_has_stat = false
+@@ -1264,6 +1284,7 @@ config_host_data.set('CONFIG_LIBNFS', li
+ config_host_data.set('CONFIG_LINUX_IO_URING', linux_io_uring.found())
+ config_host_data.set('CONFIG_LIBPMEM', libpmem.found())
+ config_host_data.set('CONFIG_RBD', rbd.found())
++config_host_data.set('CONFIG_VITASTOR', vitastor.found())
+ config_host_data.set('CONFIG_SDL', sdl.found())
+ config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
+ config_host_data.set('CONFIG_SECCOMP', seccomp.found())
+@@ -3075,6 +3096,7 @@ summary_info += {'bpf support': libbpf.f
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       rbd.found()}
++summary_info += {'vitastor support':  vitastor.found()}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': cacard.found()}
+ summary_info += {'U2F support':       u2f.found()}
+Index: qemu-6.1+dfsg/meson_options.txt
+===================================================================
+--- qemu-6.1+dfsg.orig/meson_options.txt
++++ qemu-6.1+dfsg/meson_options.txt
+@@ -102,6 +102,8 @@ option('lzo', type : 'feature', value :
+        description: 'lzo compression support')
+ option('rbd', type : 'feature', value : 'auto',
+        description: 'Ceph block device driver')
++option('vitastor', type : 'feature', value : 'auto',
++       description: 'Vitastor block device driver')
+ option('gtk', type : 'feature', value : 'auto',
+        description: 'GTK+ user interface')
+ option('sdl', type : 'feature', value : 'auto',

patches/qemu-make-patches.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+# QEMU patches don't include the `block/vitastor.c` file to not duplicate it in sources
+# Run this script to append its creation to all QEMU patches
+
+DIR=$(dirname $0)
+for i in "$DIR"/qemu-*-vitastor.patch "$DIR"/pve-qemu-*-vitastor.patch; do
+    if ! grep -qP '^\+\+\+ .*block/vitastor\.c' $i; then
+        echo 'Index: a/block/vitastor.c' >> $i
+        echo '===================================================================' >> $i
+        echo '--- /dev/null' >> $i
+        echo '+++ a/block/vitastor.c' >> $i
+        echo '@@ -0,0 +1,'$(wc -l "$DIR"/../src/qemu_driver.c)' @@' >> $i
+        cat "$DIR"/../src/qemu_driver.c | sed 's/^/+/' >> $i
+    fi
+done

rpm/build-tarball.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Vitastor depends on QEMU and FIO headers, but QEMU and FIO don't have -devel packages
+# Vitastor depends on QEMU and/or FIO headers, but QEMU and FIO don't have -devel packages
 # So we have to copy their headers into the source tarball
 
 set -e
@@ -18,34 +18,11 @@ else
 fi
 cd ~/rpmbuild/SPECS
 rpmbuild -bp fio.spec
-perl -i -pe 's/^make V=1/exit 0; make V=1/' qemu*.spec
-rpmbuild -bc qemu*.spec
-perl -i -pe 's/^exit 0; make V=1/make V=1/' qemu*.spec
-cd ~/rpmbuild/BUILD/qemu*/
-rm -rf $VITASTOR/qemu $VITASTOR/fio
-mkdir -p $VITASTOR/qemu/b/qemu
-make -j8 config-host.h
-cp config-host.h $VITASTOR/qemu/b/qemu
-cp -r include $VITASTOR/qemu
-if [ -f qapi-schema.json ]; then
-    # QEMU 2.0
-    make qapi-types.h
-    cp qapi-types.h $VITASTOR/qemu/b/qemu
-else
-    # QEMU 3.0+
-    make qapi
-    cp -r qapi $VITASTOR/qemu/b/qemu
-fi
 cd $VITASTOR
-sh copy-qemu-includes.sh
-rm -rf qemu
-mv qemu-copy qemu
 ln -s ~/rpmbuild/BUILD/fio*/ fio
 sh copy-fio-includes.sh
 rm fio
 mv fio-copy fio
 FIO=`rpm -qi fio | perl -e 'while(<>) { /^Epoch[\s:]+(\S+)/ && print "$1:"; /^Version[\s:]+(\S+)/ && print $1; /^Release[\s:]+(\S+)/ && print "-$1"; }'`
-QEMU=`rpm -qi qemu qemu-kvm | perl -e 'while(<>) { /^Epoch[\s:]+(\S+)/ && print "$1:"; /^Version[\s:]+(\S+)/ && print $1; /^Release[\s:]+(\S+)/ && print "-$1"; }'`
 perl -i -pe 's/(Requires:\s*fio)([^\n]+)?/$1 = '$FIO'/' $VITASTOR/rpm/vitastor-el$EL.spec
-perl -i -pe 's/(Requires:\s*qemu(?:-kvm)?)([^\n]+)?/$1 = '$QEMU'/' $VITASTOR/rpm/vitastor-el$EL.spec
-tar --transform 's#^#vitastor-0.6.8/#' --exclude 'rpm/*.rpm' -czf $VITASTOR/../vitastor-0.6.8$(rpm --eval '%dist').tar.gz *
+tar --transform 's#^#vitastor-0.6.10/#' --exclude 'rpm/*.rpm' -czf $VITASTOR/../vitastor-0.6.10$(rpm --eval '%dist').tar.gz *

rpm/qemu-el8.Dockerfile

@@ -1,3 +1,6 @@
+# This is an attempt to automatically build patched RPM specs
+# More or less broken, better use *.spec.patch for now (and copy src/qemu_driver.c to SOURCES/qemu-vitastor.c)
+
 # Build packages for CentOS 8 inside a container
 # cd ..; podman build -t qemu-el8 -v `pwd`/packages:/root/packages -f rpm/qemu-el8.Dockerfile .
 

rpm/qemu-kvm-4.2-el7.spec.patch

@@ -1,5 +1,5 @@
 --- qemu-kvm.spec.orig	2020-11-09 23:41:03.000000000 +0000
-+++ qemu-kvm.spec	2020-12-06 10:44:24.207640963 +0000
++++ qemu-kvm.spec	2021-12-01 21:53:30.895747529 +0000
 @@ -2,7 +2,7 @@
  %global SLOF_gittagcommit 899d9883
  
@@ -9,25 +9,24 @@
  %global have_opengl   1
  %global have_fdt      0
  %global have_gluster  1
-@@ -56,7 +56,7 @@ Requires: %{name}-block-curl = %{epoch}:
- Requires: %{name}-block-gluster = %{epoch}:%{version}-%{release} \
+@@ -57,6 +57,7 @@ Requires: %{name}-block-gluster = %{epoc
  %endif                                                           \
  Requires: %{name}-block-iscsi = %{epoch}:%{version}-%{release}   \
--Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
-+#Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
+ Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
++Requires: %{name}-block-vitastor = %{epoch}:%{version}-%{release}\
  Requires: %{name}-block-ssh = %{epoch}:%{version}-%{release}
  
  # Macro to properly setup RHEL/RHEV conflict handling
-@@ -67,7 +67,7 @@ Obsoletes: %1-rhev
+@@ -67,7 +68,7 @@ Obsoletes: %1-rhev
  Summary: QEMU is a machine emulator and virtualizer
  Name: qemu-kvm
  Version: 4.2.0
 -Release: 29.vitastor%{?dist}.6
-+Release: 30.vitastor%{?dist}.6
++Release: 32.vitastor%{?dist}.6
  # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
  Epoch: 15
  License: GPLv2 and GPLv2+ and CC-BY
-@@ -99,8 +99,8 @@ Source30: kvm-s390x.conf
+@@ -99,9 +100,10 @@ Source30: kvm-s390x.conf
  Source31: kvm-x86.conf
  Source32: qemu-pr-helper.service
  Source33: qemu-pr-helper.socket
@@ -36,9 +35,11 @@
 +#Source34: 81-kvm-rhel.rules
 +#Source35: udev-kvm-check.c
  Source36: README.tests
++Source37: qemu-vitastor.c
  
  
-@@ -825,7 +825,9 @@ Patch331: kvm-Drop-bogus-IPv6-messages.p
+ Patch0005: 0005-Initial-redhat-build.patch
+@@ -825,7 +827,9 @@ Patch331: kvm-Drop-bogus-IPv6-messages.p
  Patch333: kvm-virtiofsd-Whitelist-fchmod.patch
  # For bz#1883869 - virtiofsd core dump in KATA Container [rhel-8.2.1.z]
  Patch334: kvm-virtiofsd-avoid-proc-self-fd-tempdir.patch
@@ -49,7 +50,7 @@
  
  BuildRequires: wget
  BuildRequires: rpm-build
-@@ -842,7 +844,8 @@ BuildRequires: pciutils-devel
+@@ -842,7 +846,8 @@ BuildRequires: pciutils-devel
  BuildRequires: libiscsi-devel
  BuildRequires: ncurses-devel
  BuildRequires: libattr-devel
@@ -59,7 +60,7 @@
  %if %{have_usbredir}
  BuildRequires: usbredir-devel >= 0.7.1
  %endif
-@@ -856,12 +859,12 @@ BuildRequires: virglrenderer-devel
+@@ -856,12 +861,13 @@ BuildRequires: virglrenderer-devel
  # For smartcard NSS support
  BuildRequires: nss-devel
  %endif
@@ -70,12 +71,13 @@
  BuildRequires: libssh-devel
 -BuildRequires: librados-devel
 -BuildRequires: librbd-devel
-+#BuildRequires: librados-devel
-+#BuildRequires: librbd-devel
++BuildRequires: librados2-devel
++BuildRequires: librbd1-devel
++BuildRequires: vitastor-client-devel
  %if %{have_gluster}
  # For gluster block driver
  BuildRequires: glusterfs-api-devel
-@@ -955,25 +958,25 @@ hardware for a full system such as a PC
+@@ -955,25 +961,25 @@ hardware for a full system such as a PC
  
  %package -n qemu-kvm-core
  Summary: qemu-kvm core components
@@ -105,38 +107,35 @@
  # For compressed guest memory dumps
  Requires: lzo snappy
  %if %{have_kvm_setup}
-@@ -1085,15 +1088,15 @@ This package provides the additional iSC
- Install this package if you want to access iSCSI volumes.
- 
- 
--%package  block-rbd
--Summary: QEMU Ceph/RBD block driver
--Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
--
--%description block-rbd
--This package provides the additional Ceph/RBD block driver for QEMU.
--
--Install this package if you want to access remote Ceph volumes
--using the rbd protocol.
-+#%package  block-rbd
-+#Summary: QEMU Ceph/RBD block driver
-+#Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-+#
-+#%description block-rbd
-+#This package provides the additional Ceph/RBD block driver for QEMU.
-+#
-+#Install this package if you want to access remote Ceph volumes
-+#using the rbd protocol.
+@@ -1096,6 +1102,14 @@ Install this package if you want to acce
+ using the rbd protocol.
  
  
++%package  block-vitastor
++Summary: QEMU Vitastor block driver
++Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
++
++%description block-vitastor
++This package provides the additional Vitastor block driver for QEMU.
++
++
  %package  block-ssh
-@@ -1117,12 +1120,14 @@ the Secure Shell (SSH) protocol.
+ Summary: QEMU SSH block driver
+ Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
+@@ -1110,6 +1124,7 @@ the Secure Shell (SSH) protocol.
+ %prep
+ %setup -n qemu-%{version}
+ %autopatch -p1
++cp %{SOURCE37} ./block/vitastor.c
+ 
+ %build
+ %global buildarch %{kvm_target}-softmmu
+@@ -1117,12 +1132,13 @@ the Secure Shell (SSH) protocol.
  # --build-id option is used for giving info to the debug packages.
  buildldflags="VL_LDFLAGS=-Wl,--build-id"
  
 -%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle
-+#%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle
-+%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,blkdebug,luks,null-co,nvme,copy-on-read,throttle
++%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,vitastor,blkdebug,luks,null-co,nvme,copy-on-read,throttle
  
  %if 0%{have_gluster}
      %global block_drivers_list %{block_drivers_list},gluster
@@ -146,12 +145,20 @@
  ./configure  \
   --prefix="%{_prefix}" \
   --libdir="%{_libdir}" \
-@@ -1152,15 +1157,15 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
- %else
+@@ -1132,7 +1148,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+  --docdir="%{qemudocdir}" \
+  --libexecdir="%{_libexecdir}" \
+  --extra-ldflags="-Wl,--build-id -Wl,-z,relro -Wl,-z,now" \
+- --extra-cflags="%{optflags}" \
++ --extra-cflags="%{optflags} -DRHEL_BDRV_CO_TRUNCATE_FLAGS" \
+  --with-pkgversion="%{name}-%{version}-%{release}" \
+  --with-confsuffix=/"%{name}" \
+  --firmwarepath=%{_prefix}/share/qemu-firmware \
+@@ -1153,14 +1169,15 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
    --disable-numa \
  %endif
--  --enable-rbd \
-+  --disable-rbd \
+   --enable-rbd \
++  --enable-vitastor \
  %if 0%{have_librdma}
    --enable-rdma \
  %else
@@ -165,7 +172,7 @@
    --enable-spice \
    --enable-smartcard \
    --enable-virglrenderer \
-@@ -1179,7 +1184,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+@@ -1179,7 +1196,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
  %else
    --disable-usb-redir \
  %endif
@@ -174,7 +181,7 @@
  %ifarch x86_64
    --enable-libpmem \
  %else
-@@ -1193,9 +1198,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+@@ -1193,9 +1210,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
  %endif
    --python=%{__python3} \
    --target-list="%{buildarch}" \
@@ -184,7 +191,7 @@
    --with-coroutine=ucontext \
    --tls-priority=NORMAL \
    --disable-bluez \
-@@ -1262,7 +1265,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+@@ -1262,7 +1277,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
    --disable-sanitizers \
    --disable-hvf \
    --disable-whpx \
@@ -193,7 +200,7 @@
    --disable-membarrier \
    --disable-vhost-crypto \
    --disable-libxml2 \
-@@ -1308,7 +1311,7 @@ make V=1 %{?_smp_mflags} $buildldflags
+@@ -1308,7 +1323,7 @@ make V=1 %{?_smp_mflags} $buildldflags
  cp -a %{kvm_target}-softmmu/qemu-system-%{kvm_target} qemu-kvm
  
  gcc %{SOURCE6} $RPM_OPT_FLAGS $RPM_LD_FLAGS -o ksmctl
@@ -202,7 +209,7 @@
  
  %install
  %define _udevdir %(pkg-config --variable=udevdir udev)
-@@ -1343,8 +1346,8 @@ mkdir -p $RPM_BUILD_ROOT%{testsdir}/test
+@@ -1343,8 +1358,8 @@ mkdir -p $RPM_BUILD_ROOT%{testsdir}/test
  mkdir -p $RPM_BUILD_ROOT%{testsdir}/tests/qemu-iotests
  mkdir -p $RPM_BUILD_ROOT%{testsdir}/scripts/qmp
  
@@ -213,7 +220,7 @@
  
  install -m 0644 scripts/dump-guest-memory.py \
                  $RPM_BUILD_ROOT%{_datadir}/%{name}
-@@ -1562,6 +1565,8 @@ rm -rf $RPM_BUILD_ROOT%{qemudocdir}/inte
+@@ -1562,6 +1577,8 @@ rm -rf $RPM_BUILD_ROOT%{qemudocdir}/inte
  # Remove spec
  rm -rf $RPM_BUILD_ROOT%{qemudocdir}/specs
  
@@ -222,7 +229,7 @@
  %check
  export DIFF=diff; make check V=1
  
-@@ -1645,8 +1650,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
+@@ -1645,8 +1662,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
  %config(noreplace) %{_sysconfdir}/sysconfig/ksm
  %{_unitdir}/ksmtuned.service
  %{_sbindir}/ksmtuned
@@ -233,7 +240,7 @@
  %ghost %{_sysconfdir}/kvm
  %config(noreplace) %{_sysconfdir}/ksmtuned.conf
  %dir %{_sysconfdir}/%{name}
-@@ -1711,8 +1716,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
+@@ -1711,8 +1728,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
  %{_libexecdir}/vhost-user-gpu
  %{_datadir}/%{name}/vhost-user/50-qemu-gpu.json
  %endif
@@ -244,14 +251,13 @@
  
  %files -n qemu-img
  %defattr(-,root,root)
-@@ -1748,8 +1753,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
- %files block-iscsi
- %{_libdir}/qemu-kvm/block-iscsi.so
- 
--%files block-rbd
--%{_libdir}/qemu-kvm/block-rbd.so
-+#%files block-rbd
-+#%{_libdir}/qemu-kvm/block-rbd.so
+@@ -1751,6 +1768,9 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
+ %files block-rbd
+ %{_libdir}/qemu-kvm/block-rbd.so
  
++%files block-vitastor
++%{_libdir}/qemu-kvm/block-vitastor.so
++
  %files block-ssh
  %{_libdir}/qemu-kvm/block-ssh.so
+ 

rpm/qemu-kvm-4.2-el8.spec.patch

@@ -0,0 +1,112 @@
+--- qemu-kvm.spec.orig	2021-12-01 22:10:58.967935539 +0000
++++ qemu-kvm.spec	2021-12-01 22:14:38.530117175 +0000
+@@ -57,6 +57,7 @@ Requires: %{name}-block-gluster = %{epoc
+ %endif                                                           \
+ Requires: %{name}-block-iscsi = %{epoch}:%{version}-%{release}   \
+ Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
++Requires: %{name}-block-vitastor = %{epoch}:%{version}-%{release}\
+ Requires: %{name}-block-ssh = %{epoch}:%{version}-%{release}
+ 
+ # Macro to properly setup RHEL/RHEV conflict handling
+@@ -67,7 +68,7 @@ Obsoletes: %1-rhev
+ Summary: QEMU is a machine emulator and virtualizer
+ Name: qemu-kvm
+ Version: 4.2.0
+-Release: 29%{?dist}.6
++Release: 32.vitastor%{?dist}.6
+ # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
+ Epoch: 15
+ License: GPLv2 and GPLv2+ and CC-BY
+@@ -102,6 +103,7 @@ Source33: qemu-pr-helper.socket
+ Source34: 81-kvm-rhel.rules
+ Source35: udev-kvm-check.c
+ Source36: README.tests
++Source37: qemu-vitastor.c
+ 
+ 
+ Patch0005: 0005-Initial-redhat-build.patch
+@@ -825,6 +827,7 @@ Patch331: kvm-Drop-bogus-IPv6-messages.p
+ Patch333: kvm-virtiofsd-Whitelist-fchmod.patch
+ # For bz#1883869 - virtiofsd core dump in KATA Container [rhel-8.2.1.z]
+ Patch334: kvm-virtiofsd-avoid-proc-self-fd-tempdir.patch
++Patch335: qemu-4.2-vitastor.patch
+ 
+ BuildRequires: wget
+ BuildRequires: rpm-build
+@@ -861,6 +864,7 @@ BuildRequires: libcurl-devel
+ BuildRequires: libssh-devel
+ BuildRequires: librados-devel
+ BuildRequires: librbd-devel
++BuildRequires: vitastor-client-devel
+ %if %{have_gluster}
+ # For gluster block driver
+ BuildRequires: glusterfs-api-devel
+@@ -1095,6 +1099,14 @@ Install this package if you want to acce
+ using the rbd protocol.
+ 
+ 
++%package  block-vitastor
++Summary: QEMU Vitastor block driver
++Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
++
++%description block-vitastor
++This package provides the additional Vitastor block driver for QEMU.
++
++
+ %package  block-ssh
+ Summary: QEMU SSH block driver
+ Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
+@@ -1109,6 +1121,7 @@ the Secure Shell (SSH) protocol.
+ %prep
+ %setup -n qemu-%{version}
+ %autopatch -p1
++cp %{SOURCE37} ./block/vitastor.c
+ 
+ %build
+ %global buildarch %{kvm_target}-softmmu
+@@ -1116,7 +1129,7 @@ the Secure Shell (SSH) protocol.
+ # --build-id option is used for giving info to the debug packages.
+ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+ 
+-%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle
++%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,vitastor,blkdebug,luks,null-co,nvme,copy-on-read,throttle
+ 
+ %if 0%{have_gluster}
+     %global block_drivers_list %{block_drivers_list},gluster
+@@ -1131,7 +1144,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+  --docdir="%{qemudocdir}" \
+  --libexecdir="%{_libexecdir}" \
+  --extra-ldflags="-Wl,--build-id -Wl,-z,relro -Wl,-z,now" \
+- --extra-cflags="%{optflags}" \
++ --extra-cflags="%{optflags} -DRHEL_BDRV_CO_TRUNCATE_FLAGS" \
+  --with-pkgversion="%{name}-%{version}-%{release}" \
+  --with-confsuffix=/"%{name}" \
+  --firmwarepath=%{_prefix}/share/qemu-firmware \
+@@ -1152,6 +1165,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+   --disable-numa \
+ %endif
+   --enable-rbd \
++  --enable-vitastor \
+ %if 0%{have_librdma}
+   --enable-rdma \
+ %else
+@@ -1192,9 +1206,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+ %endif
+   --python=%{__python3} \
+   --target-list="%{buildarch}" \
+-  --block-drv-rw-whitelist=%{block_drivers_list} \
+   --audio-drv-list= \
+-  --block-drv-ro-whitelist=vmdk,vhdx,vpc,https,ssh \
+   --with-coroutine=ucontext \
+   --tls-priority=NORMAL \
+   --disable-bluez \
+@@ -1750,6 +1762,9 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
+ %files block-rbd
+ %{_libdir}/qemu-kvm/block-rbd.so
+ 
++%files block-vitastor
++%{_libdir}/qemu-kvm/block-vitastor.so
++
+ %files block-ssh
+ %{_libdir}/qemu-kvm/block-ssh.so
+ 

rpm/qemu-kvm-6.0-el8.spec.patch

@@ -0,0 +1,103 @@
+--- qemu-kvm_6.0.spec.orig	2021-10-22 13:22:07.000000000 +0000
++++ qemu-kvm_6.0.spec	2021-12-01 22:43:26.095508618 +0000
+@@ -67,6 +67,7 @@ Requires: %{name}-hw-usbredir = %{epoch}
+ %endif                                                           \
+ Requires: %{name}-block-iscsi = %{epoch}:%{version}-%{release}   \
+ Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
++Requires: %{name}-block-vitastor = %{epoch}:%{version}-%{release}\
+ Requires: %{name}-block-ssh = %{epoch}:%{version}-%{release}
+ 
+ # Macro to properly setup RHEL/RHEV conflict handling
+@@ -77,7 +78,7 @@ Obsoletes: %1-rhev <= %{epoch}:%{version
+ Summary: QEMU is a machine emulator and virtualizer
+ Name: qemu-kvm
+ Version: 6.0.0
+-Release: 33%{?dist}
++Release: 33.vitastor%{?dist}
+ # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
+ Epoch: 15
+ License: GPLv2 and GPLv2+ and CC-BY
+@@ -112,6 +113,7 @@ Source33: qemu-pr-helper.socket
+ Source34: 81-kvm-rhel.rules
+ Source35: udev-kvm-check.c
+ Source36: README.tests
++Source37: qemu-vitastor.c
+ 
+ 
+ Patch0001: 0001-redhat-Adding-slirp-to-the-exploded-tree.patch
+@@ -342,6 +344,7 @@ Patch109: kvm-virtio-balloon-Fix-page-po
+ Patch110: kvm-virtio-net-fix-use-after-unmap-free-for-sg.patch
+ # For bz#1999141 - migration fails with: "qemu-kvm: get_pci_config_device: Bad config data: i=0x9a read: 3 device: 2 cmask: ff wmask: 0 w1cmask:0"
+ Patch111: kvm-Fix-virtio-net-pci-vectors-compat.patch
++Patch112: qemu-6.0-vitastor.patch
+ 
+ BuildRequires: wget
+ BuildRequires: rpm-build
+@@ -379,6 +382,7 @@ BuildRequires: libcurl-devel
+ BuildRequires: libssh-devel
+ BuildRequires: librados-devel
+ BuildRequires: librbd-devel
++BuildRequires: vitastor-client-devel
+ %if %{have_gluster}
+ # For gluster block driver
+ BuildRequires: glusterfs-api-devel
+@@ -625,6 +629,14 @@ Install this package if you want to acce
+ using the rbd protocol.
+ 
+ 
++%package  block-vitastor
++Summary: QEMU Vitastor block driver
++Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
++
++%description block-vitastor
++This package provides the additional Vitastor block driver for QEMU.
++
++
+ %package  block-ssh
+ Summary: QEMU SSH block driver
+ Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
+@@ -678,6 +690,7 @@ This package provides usbredir support.
+ rm -fr slirp
+ mkdir slirp
+ %autopatch -p1
++cp %{SOURCE37} ./block/vitastor.c
+ 
+ %global qemu_kvm_build qemu_kvm_build
+ %global qemu_kiwi_build qemu_kiwi_src/build
+@@ -701,7 +714,7 @@ mkdir -p %{qemu_kvm_build}
+ # --build-id option is used for giving info to the debug packages.
+ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+ 
+-%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle
++%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,vitastor,blkdebug,luks,null-co,nvme,copy-on-read,throttle
+ 
+ %if 0%{have_gluster}
+     %global block_drivers_list %{block_drivers_list},gluster
+@@ -894,6 +907,7 @@ pushd %{qemu_kvm_build}
+ %endif
+   --enable-pie \
+   --enable-rbd \
++  --enable-vitastor \
+ %if 0%{have_librdma}
+   --enable-rdma \
+ %endif
+@@ -977,9 +991,7 @@ find ../default-configs -name "*-rh-devi
+   --firmwarepath=%{_prefix}/share/qemu-firmware \
+   --meson="%{__meson}" \
+   --target-list="%{buildarch}" \
+-  --block-drv-rw-whitelist=%{block_drivers_list} \
+   --audio-drv-list= \
+-  --block-drv-ro-whitelist=vmdk,vhdx,vpc,https,ssh \
+   --with-coroutine=ucontext \
+   --with-git=git \
+   --tls-priority=@QEMU,SYSTEM \
+@@ -1584,6 +1596,9 @@ sh %{_sysconfdir}/sysconfig/modules/kvm.
+ %files block-rbd
+ %{_libdir}/qemu-kvm/block-rbd.so
+ 
++%files block-vitastor
++%{_libdir}/qemu-kvm/block-vitastor.so
++
+ %files block-ssh
+ %{_libdir}/qemu-kvm/block-ssh.so
+ 

rpm/qemu-kvm.spec.patch

@@ -1,29 +0,0 @@
---- qemu-kvm.spec	2020-12-05 13:13:54.388623517 +0000
-+++ qemu-kvm.spec	2020-12-05 13:13:58.728696598 +0000
-@@ -67,7 +67,7 @@ Obsoletes: %1-rhev
- Summary: QEMU is a machine emulator and virtualizer
- Name: qemu-kvm
- Version: 4.2.0
--Release: 29%{?dist}.6
-+Release: 29.vitastor%{?dist}.6
- # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
- Epoch: 15
- License: GPLv2 and GPLv2+ and CC-BY
-@@ -825,6 +825,7 @@ Patch331: kvm-Drop-bogus-IPv6-messages.p
- Patch333: kvm-virtiofsd-Whitelist-fchmod.patch
- # For bz#1883869 - virtiofsd core dump in KATA Container [rhel-8.2.1.z]
- Patch334: kvm-virtiofsd-avoid-proc-self-fd-tempdir.patch
-+Patch335: qemu-4.2-vitastor.patch
- 
- BuildRequires: wget
- BuildRequires: rpm-build
-@@ -1192,9 +1193,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
- %endif
-   --python=%{__python3} \
-   --target-list="%{buildarch}" \
--  --block-drv-rw-whitelist=%{block_drivers_list} \
-   --audio-drv-list= \
--  --block-drv-ro-whitelist=vmdk,vhdx,vpc,https,ssh \
-   --with-coroutine=ucontext \
-   --tls-priority=NORMAL \
-   --disable-bluez \

rpm/vitastor-el7.Dockerfile

@@ -9,15 +9,11 @@ WORKDIR /root
 RUN rm -f /etc/yum.repos.d/CentOS-Media.repo
 RUN yum -y --enablerepo=extras install centos-release-scl epel-release yum-utils rpm-build
 RUN yum -y install https://vitastor.io/rpms/centos/7/vitastor-release-1.0-1.el7.noarch.rpm
-RUN yum -y install devtoolset-9-gcc-c++ devtoolset-9-libatomic-devel gperftools-devel qemu-kvm fio rh-nodejs12 jerasure-devel gf-complete-devel
-RUN yumdownloader --disablerepo=centos-sclo-rh --source qemu-kvm
+RUN yum -y install devtoolset-9-gcc-c++ devtoolset-9-libatomic-devel gcc make cmake gperftools-devel fio rh-nodejs12 jerasure-devel gf-complete-devel rdma-core-devel
 RUN yumdownloader --disablerepo=centos-sclo-rh --source fio
-RUN rpm --nomd5 -i qemu*.src.rpm
 RUN rpm --nomd5 -i fio*.src.rpm
 RUN rm -f /etc/yum.repos.d/CentOS-Media.repo
-RUN cd ~/rpmbuild/SPECS && yum-builddep -y qemu-kvm.spec
 RUN cd ~/rpmbuild/SPECS && yum-builddep -y fio.spec
-RUN yum -y install rdma-core-devel
 
 ADD https://vitastor.io/rpms/liburing-el7/liburing-0.7-2.el7.src.rpm /root
 
@@ -38,7 +34,7 @@ ADD . /root/vitastor
 RUN set -e; \
     cd /root/vitastor/rpm; \
     sh build-tarball.sh; \
-    cp /root/vitastor-0.6.8.el7.tar.gz ~/rpmbuild/SOURCES; \
+    cp /root/vitastor-0.6.10.el7.tar.gz ~/rpmbuild/SOURCES; \
     cp vitastor-el7.spec ~/rpmbuild/SPECS/vitastor.spec; \
     cd ~/rpmbuild/SPECS/; \
     rpmbuild -ba vitastor.spec; \

rpm/vitastor-el7.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        0.6.8
+Version:        0.6.10
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-0.6.8.el7.tar.gz
+Source0:        vitastor-0.6.10.el7.tar.gz
 
 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel
@@ -21,7 +21,6 @@ Requires:       vitastor-mon = %{version}-%{release}
 Requires:       vitastor-client = %{version}-%{release}
 Requires:       vitastor-client-devel = %{version}-%{release}
 Requires:       vitastor-fio = %{version}-%{release}
-Requires:       vitastor-qemu = %{version}-%{release}
 
 %description
 Vitastor is a small, simple and fast clustered block storage (storage for VM drives),
@@ -83,24 +82,13 @@ Requires:       fio = 3.7-1.el7
 Vitastor fio drivers for benchmarking.
 
 
-%package -n vitastor-qemu
-Summary:        Vitastor - QEMU driver
-Group:          Development/Libraries
-Requires:       vitastor-client = %{version}-%{release}
-Requires:       qemu-kvm = 2.0.0-1.el7.6
-
-
-%description -n vitastor-qemu
-Vitastor QEMU block device driver.
-
-
 %prep
 %setup -q
 
 
 %build
 . /opt/rh/devtoolset-9/enable
-%cmake . -DQEMU_PLUGINDIR=qemu-kvm
+%cmake .
 %make_build
 
 
@@ -123,7 +111,6 @@ cp -r mon %buildroot/usr/lib/vitastor
 %files -n vitastor-osd
 %_bindir/vitastor-osd
 %_bindir/vitastor-dump-journal
-/usr/lib/vitastor/make-osd.sh
 
 
 %files -n vitastor-mon
@@ -137,6 +124,7 @@ cp -r mon %buildroot/usr/lib/vitastor
 %_bindir/vita
 %_libdir/libvitastor_blk.so*
 %_libdir/libvitastor_client.so*
+/usr/lib/vitastor/make-osd.sh
 
 
 %files -n vitastor-client-devel
@@ -150,8 +138,4 @@ cp -r mon %buildroot/usr/lib/vitastor
 %_libdir/libfio_vitastor_sec.so
 
 
-%files -n vitastor-qemu
-%_libdir/qemu-kvm/block-vitastor.so
-
-
 %changelog

rpm/vitastor-el8.Dockerfile

@@ -8,14 +8,11 @@ WORKDIR /root
 RUN rm -f /etc/yum.repos.d/CentOS-Media.repo
 RUN dnf -y install centos-release-advanced-virtualization epel-release dnf-plugins-core
 RUN yum -y install https://vitastor.io/rpms/centos/8/vitastor-release-1.0-1.el8.noarch.rpm
-RUN dnf --enablerepo='centos-advanced-virtualization' -y install gcc-toolset-9 gcc-toolset-9-gcc-c++ gperftools-devel qemu-kvm fio nodejs rpm-build jerasure-devel gf-complete-devel
-RUN rm -rf /var/lib/dnf/*; dnf download --disablerepo='*' --enablerepo='vitastor' --source qemu-kvm
+RUN dnf -y install gcc-toolset-9 gcc-toolset-9-gcc-c++ gperftools-devel \
+    fio nodejs rpm-build jerasure-devel gf-complete-devel libibverbs-devel libarchive cmake
 RUN dnf download --source fio
-RUN rpm --nomd5 -i qemu*.src.rpm
 RUN rpm --nomd5 -i fio*.src.rpm
-RUN cd ~/rpmbuild/SPECS && dnf builddep -y --enablerepo=powertools --spec qemu-kvm.spec
-RUN cd ~/rpmbuild/SPECS && dnf builddep -y --enablerepo=powertools --spec fio.spec && dnf install -y cmake
-RUN yum -y install libibverbs-devel libarchive
+RUN cd ~/rpmbuild/SPECS && dnf builddep -y --enablerepo=powertools --spec fio.spec
 
 ADD https://vitastor.io/rpms/liburing-el7/liburing-0.7-2.el7.src.rpm /root
 
@@ -29,14 +26,14 @@ RUN set -e; \
     cp ~/rpmbuild/RPMS/*/liburing* /root/packages/liburing-el8/; \
     cp ~/rpmbuild/SRPMS/liburing* /root/packages/liburing-el8/
 
-RUN rpm -i `ls /root/packages/liburing-el7/liburing-*.x86_64.rpm | grep -v debug`
+RUN rpm -i `ls /root/packages/liburing-el8/liburing-*.x86_64.rpm | grep -v debug`
 
 ADD . /root/vitastor
 
 RUN set -e; \
     cd /root/vitastor/rpm; \
     sh build-tarball.sh; \
-    cp /root/vitastor-0.6.8.el8.tar.gz ~/rpmbuild/SOURCES; \
+    cp /root/vitastor-0.6.10.el8.tar.gz ~/rpmbuild/SOURCES; \
     cp vitastor-el8.spec ~/rpmbuild/SPECS/vitastor.spec; \
     cd ~/rpmbuild/SPECS/; \
     rpmbuild -ba vitastor.spec; \

rpm/vitastor-el8.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        0.6.8
+Version:        0.6.10
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-0.6.8.el8.tar.gz
+Source0:        vitastor-0.6.10.el8.tar.gz
 
 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel
@@ -20,7 +20,6 @@ Requires:       vitastor-mon = %{version}-%{release}
 Requires:       vitastor-client = %{version}-%{release}
 Requires:       vitastor-client-devel = %{version}-%{release}
 Requires:       vitastor-fio = %{version}-%{release}
-Requires:       vitastor-qemu = %{version}-%{release}
 
 %description
 Vitastor is a small, simple and fast clustered block storage (storage for VM drives),
@@ -81,24 +80,13 @@ Requires:       fio = 3.7-3.el8
 Vitastor fio drivers for benchmarking.
 
 
-%package -n vitastor-qemu
-Summary:        Vitastor - QEMU driver
-Group:          Development/Libraries
-Requires:       vitastor-client = %{version}-%{release}
-Requires:       qemu-kvm = 4.2.0-29.el8.6
-
-
-%description -n vitastor-qemu
-Vitastor QEMU block device driver.
-
-
 %prep
 %setup -q
 
 
 %build
 . /opt/rh/gcc-toolset-9/enable
-%cmake . -DQEMU_PLUGINDIR=qemu-kvm
+%cmake .
 %make_build
 
 
@@ -120,7 +108,6 @@ cp -r mon %buildroot/usr/lib/vitastor
 %files -n vitastor-osd
 %_bindir/vitastor-osd
 %_bindir/vitastor-dump-journal
-/usr/lib/vitastor/make-osd.sh
 
 
 %files -n vitastor-mon
@@ -134,6 +121,7 @@ cp -r mon %buildroot/usr/lib/vitastor
 %_bindir/vita
 %_libdir/libvitastor_blk.so*
 %_libdir/libvitastor_client.so*
+/usr/lib/vitastor/make-osd.sh
 
 
 %files -n vitastor-client-devel
@@ -147,8 +135,4 @@ cp -r mon %buildroot/usr/lib/vitastor
 %_libdir/libfio_vitastor_sec.so
 
 
-%files -n vitastor-qemu
-%_libdir/qemu-kvm/block-vitastor.so
-
-
 %changelog

src/CMakeLists.txt

@@ -4,7 +4,7 @@ project(vitastor)
 
 include(GNUInstallDirs)
 
-set(WITH_QEMU true CACHE BOOL "Build QEMU driver")
+set(WITH_QEMU false CACHE BOOL "Build QEMU driver inside Vitastor source tree")
 set(WITH_FIO true CACHE BOOL "Build FIO driver")
 set(QEMU_PLUGINDIR qemu CACHE STRING "QEMU plugin directory suffix (qemu-kvm on RHEL)")
 set(WITH_ASAN false CACHE BOOL "Build with AddressSanitizer")
@@ -15,7 +15,7 @@ if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/local/?$")
 	set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
 endif()
 
-add_definitions(-DVERSION="0.6.8")
+add_definitions(-DVERSION="0.6.10")
 add_definitions(-Wall -Wno-sign-compare -Wno-comment -Wno-parentheses -Wno-pointer-arith -fdiagnostics-color=always -I ${CMAKE_SOURCE_DIR}/src)
 if (${WITH_ASAN})
 	add_definitions(-fsanitize=address -fno-omit-frame-pointer)
@@ -88,8 +88,8 @@ if (IBVERBS_LIBRARIES)
 	set(MSGR_RDMA "msgr_rdma.cpp")
 endif (IBVERBS_LIBRARIES)
 add_library(vitastor_common STATIC
-	epoll_manager.cpp etcd_state_client.cpp
-	messenger.cpp msgr_stop.cpp msgr_op.cpp msgr_send.cpp msgr_receive.cpp ringloop.cpp ../json11/json11.cpp
+	epoll_manager.cpp etcd_state_client.cpp messenger.cpp addr_util.cpp
+	msgr_stop.cpp msgr_op.cpp msgr_send.cpp msgr_receive.cpp ringloop.cpp ../json11/json11.cpp
 	http_client.cpp osd_ops.cpp pg_states.cpp timerfd_manager.cpp base64.cpp ${MSGR_RDMA}
 )
 target_compile_options(vitastor_common PUBLIC -fPIC)
@@ -112,6 +112,7 @@ if (${WITH_FIO})
 	add_library(fio_vitastor_sec SHARED
 		fio_sec_osd.cpp
 		rw_blocking.cpp
+		addr_util.cpp
 	)
 	target_link_libraries(fio_vitastor_sec
 		tcmalloc_minimal
@@ -145,7 +146,7 @@ endif (${WITH_FIO})
 
 # vitastor-nbd
 add_executable(vitastor-nbd
-	nbd_proxy.cpp mmap_manager.cpp
+	nbd_proxy.cpp
 )
 target_link_libraries(vitastor-nbd
 	vitastor_client
@@ -153,7 +154,7 @@ target_link_libraries(vitastor-nbd
 
 # vitastor-cli
 add_executable(vitastor-cli
-	cli.cpp cli_alloc_osd.cpp cli_simple_offsets.cpp
+	cli.cpp cli_alloc_osd.cpp cli_simple_offsets.cpp cli_df.cpp
 	cli_ls.cpp cli_create.cpp cli_modify.cpp cli_flatten.cpp cli_merge.cpp cli_rm.cpp cli_snap_rm.cpp
 )
 target_link_libraries(vitastor-cli
@@ -171,6 +172,7 @@ if (${WITH_QEMU})
 	add_library(qemu_vitastor SHARED
 		qemu_driver.c
 	)
+	target_compile_options(qemu_vitastor PUBLIC -DVITASTOR_SOURCE_TREE)
 	target_include_directories(qemu_vitastor PUBLIC
 		../qemu/b/qemu
 		../qemu/include
@@ -188,11 +190,11 @@ endif (${WITH_QEMU})
 ### Test stubs
 
 # stub_osd, stub_bench, osd_test
-add_executable(stub_osd stub_osd.cpp rw_blocking.cpp mmap_manager.cpp)
+add_executable(stub_osd stub_osd.cpp rw_blocking.cpp addr_util.cpp)
 target_link_libraries(stub_osd tcmalloc_minimal)
-add_executable(stub_bench stub_bench.cpp rw_blocking.cpp)
+add_executable(stub_bench stub_bench.cpp rw_blocking.cpp addr_util.cpp)
 target_link_libraries(stub_bench tcmalloc_minimal)
-add_executable(osd_test osd_test.cpp rw_blocking.cpp)
+add_executable(osd_test osd_test.cpp rw_blocking.cpp addr_util.cpp)
 target_link_libraries(osd_test tcmalloc_minimal)
 
 # osd_rmw_test

src/addr_util.cpp

@@ -0,0 +1,60 @@
+#include <arpa/inet.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <stdexcept>
+
+#include "addr_util.h"
+
+bool string_to_addr(std::string str, bool parse_port, int default_port, struct sockaddr *addr)
+{
+    if (parse_port)
+    {
+        int p = str.rfind(':');
+        if (p != std::string::npos && !(str.length() > 0 && str[p-1] == ']')) // "[ipv6]" which contains ':'
+        {
+            char null_byte = 0;
+            int n = sscanf(str.c_str()+p+1, "%d%c", &default_port, &null_byte);
+            if (n != 1 || default_port >= 0x10000)
+                return false;
+            str = str.substr(0, p);
+        }
+    }
+    if (inet_pton(AF_INET, str.c_str(), &((struct sockaddr_in*)addr)->sin_addr) == 1)
+    {
+        addr->sa_family = AF_INET;
+        ((struct sockaddr_in*)addr)->sin_port = htons(default_port);
+        return true;
+    }
+    if (str.length() >= 2 && str[0] == '[' && str[str.length()-1] == ']')
+        str = str.substr(1, str.length()-2);
+    if (inet_pton(AF_INET6, str.c_str(), &((struct sockaddr_in6*)addr)->sin6_addr) == 1)
+    {
+        addr->sa_family = AF_INET6;
+        ((struct sockaddr_in6*)addr)->sin6_port = htons(default_port);
+        return true;
+    }
+    return false;
+}
+
+std::string addr_to_string(const sockaddr &addr)
+{
+    char peer_str[256];
+    bool ok = false;
+    int port;
+    if (addr.sa_family == AF_INET)
+    {
+        ok = !!inet_ntop(AF_INET, &((sockaddr_in*)&addr)->sin_addr, peer_str, 256);
+        port = ntohs(((sockaddr_in*)&addr)->sin_port);
+    }
+    else if (addr.sa_family == AF_INET6)
+    {
+        ok = !!inet_ntop(AF_INET6, &((sockaddr_in6*)&addr)->sin6_addr, peer_str, 256);
+        port = ntohs(((sockaddr_in6*)&addr)->sin6_port);
+    }
+    else
+        throw std::runtime_error("Unknown address family "+std::to_string(addr.sa_family));
+    if (!ok)
+        throw std::runtime_error(std::string("inet_ntop: ") + strerror(errno));
+    return std::string(peer_str)+":"+std::to_string(port);
+}

src/addr_util.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#include <sys/socket.h>
+#include <string>
+
+bool string_to_addr(std::string str, bool parse_port, int default_port, struct sockaddr *addr);
+std::string addr_to_string(const sockaddr &addr);

src/blockstore_flush.cpp

@@ -547,8 +547,9 @@ resume_1:
             clean_disk_entry *new_entry = (clean_disk_entry*)(meta_new.buf + meta_new.pos*bs->clean_entry_size);
             if (new_entry->oid.inode != 0 && new_entry->oid != cur.oid)
             {
-                printf("Fatal error (metadata corruption or bug): tried to delete metadata entry %lu (%lx:%lx) while deleting %lx:%lx\n",
-                    clean_loc >> bs->block_order, new_entry->oid.inode, new_entry->oid.stripe, cur.oid.inode, cur.oid.stripe);
+                printf("Fatal error (metadata corruption or bug): tried to delete metadata entry %lu (%lx:%lx v%lu) while deleting %lx:%lx\n",
+                    clean_loc >> bs->block_order, new_entry->oid.inode, new_entry->oid.stripe,
+                    new_entry->version, cur.oid.inode, cur.oid.stripe);
                 exit(1);
             }
             // zero out new metadata entry
@@ -559,8 +560,9 @@ resume_1:
             clean_disk_entry *new_entry = (clean_disk_entry*)(meta_new.buf + meta_new.pos*bs->clean_entry_size);
             if (new_entry->oid.inode != 0 && new_entry->oid != cur.oid)
             {
-                printf("Fatal error (metadata corruption or bug): tried to overwrite non-zero metadata entry %lu (%lx:%lx) with %lx:%lx\n",
-                    clean_loc >> bs->block_order, new_entry->oid.inode, new_entry->oid.stripe, cur.oid.inode, cur.oid.stripe);
+                printf("Fatal error (metadata corruption or bug): tried to overwrite non-zero metadata entry %lu (%lx:%lx v%lu) with %lx:%lx v%lu\n",
+                    clean_loc >> bs->block_order, new_entry->oid.inode, new_entry->oid.stripe, new_entry->version,
+                    cur.oid.inode, cur.oid.stripe, cur.version);
                 exit(1);
             }
             new_entry->oid = cur.oid;
@@ -743,12 +745,15 @@ bool journal_flusher_co::scan_dirty(int wait_base)
                 offset = dirty_it->second.offset;
                 end_offset = dirty_it->second.offset + dirty_it->second.len;
                 it = v.begin();
-                while (1)
+                while (end_offset > offset)
                 {
                     for (; it != v.end(); it++)
-                        if (it->offset >= offset)
+                        if (it->offset+it->len > offset)
                             break;
-                    if (it == v.end() || it->offset > offset && it->len > 0)
+                    // If all items end before offset or if the found item starts after end_offset, just insert the buffer
+                    // If (offset < it->offset < end_offset) insert (offset..it->offset) part
+                    // If (it->offset <= offset <= it->offset+it->len) then just skip to it->offset+it->len
+                    if (it == v.end() || it->offset > offset)
                     {
                         submit_offset = dirty_it->second.location + offset - dirty_it->second.offset;
                         submit_len = it == v.end() || it->offset >= end_offset ? end_offset-offset : it->offset-offset;
@@ -772,7 +777,7 @@ bool journal_flusher_co::scan_dirty(int wait_base)
                         }
                     }
                     offset = it->offset+it->len;
-                    if (it == v.end() || offset >= end_offset)
+                    if (it == v.end())
                         break;
                 }
             }

src/blockstore_impl.cpp

@@ -235,6 +235,12 @@ void blockstore_impl_t::loop()
         {
             throw std::runtime_error(std::string("io_uring_submit: ") + strerror(-ret));
         }
+        for (auto s: journal.submitting_sectors)
+        {
+            // Mark journal sector writes as submitted
+            journal.sector_info[s].submit_id = 0;
+        }
+        journal.submitting_sectors.clear();
         if ((initial_ring_space - ringloop->space_left()) > 0)
         {
             live = true;

src/blockstore_impl.h

@@ -54,6 +54,14 @@
 #define IS_BIG_WRITE(st) (((st) & 0x0F) == BS_ST_BIG_WRITE)
 #define IS_DELETE(st) (((st) & 0x0F) == BS_ST_DELETE)
 
+#define BS_SUBMIT_CHECK_SQES(n) \
+    if (ringloop->space_left() < (n))\
+    {\
+        /* Pause until there are more requests available */\
+        PRIV(op)->wait_for = WAIT_SQE;\
+        return 0;\
+    }
+
 #define BS_SUBMIT_GET_SQE(sqe, data) \
     BS_SUBMIT_GET_ONLY_SQE(sqe); \
     struct ring_data_t *data = ((ring_data_t*)sqe->user_data)
@@ -170,7 +178,7 @@ struct blockstore_op_private_t
     std::vector<fulfill_read_t> read_vec;
 
     // Sync, write
-    uint64_t min_flushed_journal_sector, max_flushed_journal_sector;
+    int min_flushed_journal_sector, max_flushed_journal_sector;
 
     // Write
     struct iovec iov_zerofill[3];
@@ -251,6 +259,7 @@ class blockstore_impl_t
     int data_fd;
     uint64_t meta_size, meta_area, meta_len;
     uint64_t data_size, data_len;
+    uint64_t data_device_sect, meta_device_sect, journal_device_sect;
 
     void *metadata_buffer = NULL;
 
@@ -282,6 +291,10 @@ class blockstore_impl_t
     void open_journal();
     uint8_t* get_clean_entry_bitmap(uint64_t block_loc, int offset);
 
+    // Journaling
+    void prepare_journal_sector_write(int sector, blockstore_op_t *op);
+    void handle_journal_write(ring_data_t *data, uint64_t flush_id);
+
     // Asynchronous init
     int initialized;
     int metadata_buf_size;
@@ -309,21 +322,18 @@ class blockstore_impl_t
 
     // Sync
     int continue_sync(blockstore_op_t *op, bool queue_has_in_progress_sync);
-    void handle_sync_event(ring_data_t *data, blockstore_op_t *op);
     void ack_sync(blockstore_op_t *op);
 
     // Stabilize
     int dequeue_stable(blockstore_op_t *op);
     int continue_stable(blockstore_op_t *op);
     void mark_stable(const obj_ver_id & ov, bool forget_dirty = false);
-    void handle_stable_event(ring_data_t *data, blockstore_op_t *op);
     void stabilize_object(object_id oid, uint64_t max_ver);
 
     // Rollback
     int dequeue_rollback(blockstore_op_t *op);
     int continue_rollback(blockstore_op_t *op);
     void mark_rolled_back(const obj_ver_id & ov);
-    void handle_rollback_event(ring_data_t *data, blockstore_op_t *op);
     void erase_dirty(blockstore_dirty_db_t::iterator dirty_start, blockstore_dirty_db_t::iterator dirty_end, uint64_t clean_loc);
 
     // List

src/blockstore_journal.cpp

@@ -153,22 +153,73 @@ journal_entry* prefill_single_journal_entry(journal_t & journal, uint16_t type,
     return je;
 }
 
-void prepare_journal_sector_write(journal_t & journal, int cur_sector, io_uring_sqe *sqe, std::function<void(ring_data_t*)> cb)
+void blockstore_impl_t::prepare_journal_sector_write(int cur_sector, blockstore_op_t *op)
 {
-    journal.sector_info[cur_sector].dirty = false;
-    journal.sector_info[cur_sector].written = true;
-    journal.sector_info[cur_sector].flush_count++;
+    // Don't submit the same sector twice in the same batch
+    if (!journal.sector_info[cur_sector].submit_id)
+    {
+        io_uring_sqe *sqe = get_sqe();
+        // Caller must ensure availability of an SQE
+        assert(sqe != NULL);
         ring_data_t *data = ((ring_data_t*)sqe->user_data);
+        journal.sector_info[cur_sector].written = true;
+        journal.sector_info[cur_sector].submit_id = ++journal.submit_id;
+        journal.submitting_sectors.push_back(cur_sector);
+        journal.sector_info[cur_sector].flush_count++;
         data->iov = (struct iovec){
             (journal.inmemory
                 ? journal.buffer + journal.sector_info[cur_sector].offset
                 : journal.sector_buf + journal.block_size*cur_sector),
             journal.block_size
         };
-    data->callback = cb;
+        data->callback = [this, flush_id = journal.submit_id](ring_data_t *data) { handle_journal_write(data, flush_id); };
         my_uring_prep_writev(
             sqe, journal.fd, &data->iov, 1, journal.offset + journal.sector_info[cur_sector].offset
         );
+    }
+    journal.sector_info[cur_sector].dirty = false;
+    // But always remember that this operation has to wait until this exact journal write is finished
+    journal.flushing_ops.insert((pending_journaling_t){
+        .flush_id = journal.sector_info[cur_sector].submit_id,
+        .sector = cur_sector,
+        .op = op,
+    });
+    auto priv = PRIV(op);
+    priv->pending_ops++;
+    if (!priv->min_flushed_journal_sector)
+        priv->min_flushed_journal_sector = 1+cur_sector;
+    priv->max_flushed_journal_sector = 1+cur_sector;
+}
+
+void blockstore_impl_t::handle_journal_write(ring_data_t *data, uint64_t flush_id)
+{
+    live = true;
+    if (data->res != data->iov.iov_len)
+    {
+        // FIXME: our state becomes corrupted after a write error. maybe do something better than just die
+        throw std::runtime_error(
+            "journal write failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
+            "). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
+        );
+    }
+    auto fl_it = journal.flushing_ops.upper_bound((pending_journaling_t){ .flush_id = flush_id });
+    if (fl_it != journal.flushing_ops.end() && fl_it->flush_id == flush_id)
+    {
+        journal.sector_info[fl_it->sector].flush_count--;
+    }
+    while (fl_it != journal.flushing_ops.end() && fl_it->flush_id == flush_id)
+    {
+        auto priv = PRIV(fl_it->op);
+        priv->pending_ops--;
+        assert(priv->pending_ops >= 0);
+        if (priv->pending_ops == 0)
+        {
+            release_journal_sectors(fl_it->op);
+            priv->op_state++;
+            ringloop->wakeup();
+        }
+        journal.flushing_ops.erase(fl_it++);
+    }
 }
 
 journal_t::~journal_t()

src/blockstore_journal.h

@@ -4,6 +4,7 @@
 #pragma once
 
 #include "crc32c.h"
+#include <set>
 
 #define MIN_JOURNAL_SIZE 4*1024*1024
 #define JOURNAL_MAGIC 0x4A33
@@ -145,8 +146,21 @@ struct journal_sector_info_t
     uint64_t flush_count;
     bool written;
     bool dirty;
+    uint64_t submit_id;
 };
 
+struct pending_journaling_t
+{
+    uint64_t flush_id;
+    int sector;
+    blockstore_op_t *op;
+};
+
+inline bool operator < (const pending_journaling_t & a, const pending_journaling_t & b)
+{
+    return a.flush_id < b.flush_id || a.flush_id == b.flush_id && a.op < b.op;
+}
+
 struct journal_t
 {
     int fd;
@@ -172,6 +186,9 @@ struct journal_t
     bool no_same_sector_overwrites = false;
     int cur_sector = 0;
     int in_sector_pos = 0;
+    std::vector<int> submitting_sectors;
+    std::set<pending_journaling_t> flushing_ops;
+    uint64_t submit_id = 0;
 
     // Used sector map
     // May use ~ 80 MB per 1 GB of used journal space in the worst case
@@ -200,5 +217,3 @@ struct blockstore_journal_check_t
 };
 
 journal_entry* prefill_single_journal_entry(journal_t & journal, uint16_t type, uint32_t size);
-
-void prepare_journal_sector_write(journal_t & journal, int sector, io_uring_sqe *sqe, std::function<void(ring_data_t*)> cb);

src/blockstore_open.cpp

@@ -295,9 +295,9 @@ void blockstore_impl_t::calc_lengths()
     }
 }
 
-void check_size(int fd, uint64_t *size, std::string name)
+static void check_size(int fd, uint64_t *size, uint64_t *sectsize, std::string name)
 {
-    int sectsize;
+    int sect;
     struct stat st;
     if (fstat(fd, &st) < 0)
     {
@@ -306,14 +306,21 @@ void check_size(int fd, uint64_t *size, std::string name)
     if (S_ISREG(st.st_mode))
     {
         *size = st.st_size;
+        if (sectsize)
+        {
+            *sectsize = st.st_blksize;
+        }
     }
     else if (S_ISBLK(st.st_mode))
     {
-        if (ioctl(fd, BLKSSZGET, &sectsize) < 0 ||
-            ioctl(fd, BLKGETSIZE64, size) < 0 ||
-            sectsize != 512)
+        if (ioctl(fd, BLKGETSIZE64, size) < 0 ||
+            ioctl(fd, BLKSSZGET, &sect) < 0)
         {
-            throw std::runtime_error(name+" sector is not equal to 512 bytes");
+            throw std::runtime_error("failed to get "+name+" size or block size: "+strerror(errno));
+        }
+        if (sectsize)
+        {
+            *sectsize = sect;
         }
     }
     else
@@ -329,7 +336,14 @@ void blockstore_impl_t::open_data()
     {
         throw std::runtime_error("Failed to open data device");
     }
-    check_size(data_fd, &data_size, "data device");
+    check_size(data_fd, &data_size, &data_device_sect, "data device");
+    if (disk_alignment % data_device_sect)
+    {
+        throw std::runtime_error(
+            "disk_alignment ("+std::to_string(disk_alignment)+
+            ") is not a multiple of data device sector size ("+std::to_string(data_device_sect)+")"
+        );
+    }
     if (data_offset >= data_size)
     {
         throw std::runtime_error("data_offset exceeds device size = "+std::to_string(data_size));
@@ -350,7 +364,7 @@ void blockstore_impl_t::open_meta()
         {
             throw std::runtime_error("Failed to open metadata device");
         }
-        check_size(meta_fd, &meta_size, "metadata device");
+        check_size(meta_fd, &meta_size, &meta_device_sect, "metadata device");
         if (meta_offset >= meta_size)
         {
             throw std::runtime_error("meta_offset exceeds device size = "+std::to_string(meta_size));
@@ -363,12 +377,20 @@ void blockstore_impl_t::open_meta()
     else
     {
         meta_fd = data_fd;
+        meta_device_sect = data_device_sect;
         meta_size = 0;
         if (meta_offset >= data_size)
         {
             throw std::runtime_error("meta_offset exceeds device size = "+std::to_string(data_size));
         }
     }
+    if (meta_block_size % meta_device_sect)
+    {
+        throw std::runtime_error(
+            "meta_block_size ("+std::to_string(meta_block_size)+
+            ") is not a multiple of data device sector size ("+std::to_string(meta_device_sect)+")"
+        );
+    }
 }
 
 void blockstore_impl_t::open_journal()
@@ -380,7 +402,7 @@ void blockstore_impl_t::open_journal()
         {
             throw std::runtime_error("Failed to open journal device");
         }
-        check_size(journal.fd, &journal.device_size, "journal device");
+        check_size(journal.fd, &journal.device_size, &journal_device_sect, "journal device");
         if (!disable_flock && flock(journal.fd, LOCK_EX|LOCK_NB) != 0)
         {
             throw std::runtime_error(std::string("Failed to lock journal device: ") + strerror(errno));
@@ -389,6 +411,7 @@ void blockstore_impl_t::open_journal()
     else
     {
         journal.fd = meta_fd;
+        journal_device_sect = meta_device_sect;
         journal.device_size = 0;
         if (journal.offset >= data_size)
         {
@@ -406,4 +429,11 @@ void blockstore_impl_t::open_journal()
         if (!journal.sector_buf)
             throw std::bad_alloc();
     }
+    if (journal_block_size % journal_device_sect)
+    {
+        throw std::runtime_error(
+            "journal_block_size ("+std::to_string(journal_block_size)+
+            ") is not a multiple of journal device sector size ("+std::to_string(journal_device_sect)+")"
+        );
+    }
 }

src/blockstore_rollback.cpp

@@ -74,24 +74,17 @@ skip_ov:
     {
         return 0;
     }
-    // There is sufficient space. Get SQEs
-    struct io_uring_sqe *sqe[space_check.sectors_to_write];
-    for (i = 0; i < space_check.sectors_to_write; i++)
-    {
-        BS_SUBMIT_GET_SQE_DECL(sqe[i]);
-    }
+    // There is sufficient space. Check SQEs
+    BS_SUBMIT_CHECK_SQES(space_check.sectors_to_write);
     // Prepare and submit journal entries
-    auto cb = [this, op](ring_data_t *data) { handle_rollback_event(data, op); };
-    int s = 0, cur_sector = -1;
+    int s = 0;
     for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
     {
         if (!journal.entry_fits(sizeof(journal_entry_rollback)) &&
             journal.sector_info[journal.cur_sector].dirty)
         {
-            if (cur_sector == -1)
-                PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], cb);
-            cur_sector = journal.cur_sector;
+            prepare_journal_sector_write(journal.cur_sector, op);
+            s++;
         }
         journal_entry_rollback *je = (journal_entry_rollback*)
             prefill_single_journal_entry(journal, JE_ROLLBACK, sizeof(journal_entry_rollback));
@@ -100,12 +93,9 @@ skip_ov:
         je->crc32 = je_crc32((journal_entry*)je);
         journal.crc32_last = je->crc32;
     }
-    prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], cb);
+    prepare_journal_sector_write(journal.cur_sector, op);
+    s++;
     assert(s == space_check.sectors_to_write);
-    if (cur_sector == -1)
-        PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-    PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-    PRIV(op)->pending_ops = s;
     PRIV(op)->op_state = 1;
     return 1;
 }
@@ -114,30 +104,23 @@ int blockstore_impl_t::continue_rollback(blockstore_op_t *op)
 {
     if (PRIV(op)->op_state == 2)
         goto resume_2;
-    else if (PRIV(op)->op_state == 3)
-        goto resume_3;
-    else if (PRIV(op)->op_state == 5)
-        goto resume_5;
+    else if (PRIV(op)->op_state == 4)
+        goto resume_4;
     else
         return 1;
 resume_2:
-    // Release used journal sectors
-    release_journal_sectors(op);
-resume_3:
     if (!disable_journal_fsync)
     {
-        io_uring_sqe *sqe;
-        BS_SUBMIT_GET_SQE_DECL(sqe);
-        ring_data_t *data = ((ring_data_t*)sqe->user_data);
+        BS_SUBMIT_GET_SQE(sqe, data);
         my_uring_prep_fsync(sqe, journal.fd, IORING_FSYNC_DATASYNC);
         data->iov = { 0 };
-        data->callback = [this, op](ring_data_t *data) { handle_rollback_event(data, op); };
+        data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
         PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 0;
         PRIV(op)->pending_ops = 1;
-        PRIV(op)->op_state = 4;
+        PRIV(op)->op_state = 3;
         return 1;
     }
-resume_5:
+resume_4:
     obj_ver_id* v;
     int i;
     for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
@@ -196,24 +179,6 @@ void blockstore_impl_t::mark_rolled_back(const obj_ver_id & ov)
     }
 }
 
-void blockstore_impl_t::handle_rollback_event(ring_data_t *data, blockstore_op_t *op)
-{
-    live = true;
-    if (data->res != data->iov.iov_len)
-    {
-        throw std::runtime_error(
-            "write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
-            "). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
-        );
-    }
-    PRIV(op)->pending_ops--;
-    if (PRIV(op)->pending_ops == 0)
-    {
-        PRIV(op)->op_state++;
-        ringloop->wakeup();
-    }
-}
-
 void blockstore_impl_t::erase_dirty(blockstore_dirty_db_t::iterator dirty_start, blockstore_dirty_db_t::iterator dirty_end, uint64_t clean_loc)
 {
     if (dirty_end == dirty_start)

src/blockstore_stable.cpp

@@ -97,25 +97,18 @@ int blockstore_impl_t::dequeue_stable(blockstore_op_t *op)
     {
         return 0;
     }
-    // There is sufficient space. Get SQEs
-    struct io_uring_sqe *sqe[space_check.sectors_to_write];
-    for (i = 0; i < space_check.sectors_to_write; i++)
-    {
-        BS_SUBMIT_GET_SQE_DECL(sqe[i]);
-    }
+    // There is sufficient space. Check SQEs
+    BS_SUBMIT_CHECK_SQES(space_check.sectors_to_write);
     // Prepare and submit journal entries
-    auto cb = [this, op](ring_data_t *data) { handle_stable_event(data, op); };
-    int s = 0, cur_sector = -1;
+    int s = 0;
     for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
     {
         // FIXME: Only stabilize versions that aren't stable yet
         if (!journal.entry_fits(sizeof(journal_entry_stable)) &&
             journal.sector_info[journal.cur_sector].dirty)
         {
-            if (cur_sector == -1)
-                PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], cb);
-            cur_sector = journal.cur_sector;
+            prepare_journal_sector_write(journal.cur_sector, op);
+            s++;
         }
         journal_entry_stable *je = (journal_entry_stable*)
             prefill_single_journal_entry(journal, JE_STABLE, sizeof(journal_entry_stable));
@@ -124,12 +117,9 @@ int blockstore_impl_t::dequeue_stable(blockstore_op_t *op)
         je->crc32 = je_crc32((journal_entry*)je);
         journal.crc32_last = je->crc32;
     }
-    prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], cb);
+    prepare_journal_sector_write(journal.cur_sector, op);
+    s++;
     assert(s == space_check.sectors_to_write);
-    if (cur_sector == -1)
-        PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-    PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-    PRIV(op)->pending_ops = s;
     PRIV(op)->op_state = 1;
     return 1;
 }
@@ -138,30 +128,23 @@ int blockstore_impl_t::continue_stable(blockstore_op_t *op)
 {
     if (PRIV(op)->op_state == 2)
         goto resume_2;
-    else if (PRIV(op)->op_state == 3)
-        goto resume_3;
-    else if (PRIV(op)->op_state == 5)
-        goto resume_5;
+    else if (PRIV(op)->op_state == 4)
+        goto resume_4;
     else
         return 1;
 resume_2:
-    // Release used journal sectors
-    release_journal_sectors(op);
-resume_3:
     if (!disable_journal_fsync)
     {
-        io_uring_sqe *sqe;
-        BS_SUBMIT_GET_SQE_DECL(sqe);
-        ring_data_t *data = ((ring_data_t*)sqe->user_data);
+        BS_SUBMIT_GET_SQE(sqe, data);
         my_uring_prep_fsync(sqe, journal.fd, IORING_FSYNC_DATASYNC);
         data->iov = { 0 };
-        data->callback = [this, op](ring_data_t *data) { handle_stable_event(data, op); };
+        data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
         PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 0;
         PRIV(op)->pending_ops = 1;
-        PRIV(op)->op_state = 4;
+        PRIV(op)->op_state = 3;
         return 1;
     }
-resume_5:
+resume_4:
     // Mark dirty_db entries as stable, acknowledge op completion
     obj_ver_id* v;
     int i;
@@ -257,21 +240,3 @@ void blockstore_impl_t::mark_stable(const obj_ver_id & v, bool forget_dirty)
         unstable_writes.erase(unstab_it);
     }
 }
-
-void blockstore_impl_t::handle_stable_event(ring_data_t *data, blockstore_op_t *op)
-{
-    live = true;
-    if (data->res != data->iov.iov_len)
-    {
-        throw std::runtime_error(
-            "write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
-            "). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
-        );
-    }
-    PRIV(op)->pending_ops--;
-    if (PRIV(op)->pending_ops == 0)
-    {
-        PRIV(op)->op_state++;
-        ringloop->wakeup();
-    }
-}

src/blockstore_sync.cpp

@@ -44,10 +44,8 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
         if (journal.sector_info[journal.cur_sector].dirty)
         {
             // Write out the last journal sector if it happens to be dirty
-            BS_SUBMIT_GET_ONLY_SQE(sqe);
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe, [this, op](ring_data_t *data) { handle_sync_event(data, op); });
-            PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-            PRIV(op)->pending_ops = 1;
+            BS_SUBMIT_CHECK_SQES(1);
+            prepare_journal_sector_write(journal.cur_sector, op);
             PRIV(op)->op_state = SYNC_JOURNAL_WRITE_SENT;
             return 1;
         }
@@ -64,7 +62,7 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
             BS_SUBMIT_GET_SQE(sqe, data);
             my_uring_prep_fsync(sqe, data_fd, IORING_FSYNC_DATASYNC);
             data->iov = { 0 };
-            data->callback = [this, op](ring_data_t *data) { handle_sync_event(data, op); };
+            data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
             PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 0;
             PRIV(op)->pending_ops = 1;
             PRIV(op)->op_state = SYNC_DATA_SYNC_SENT;
@@ -85,24 +83,18 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
         {
             return 0;
         }
-        // Get SQEs. Don't bother about merging, submit each journal sector as a separate request
-        struct io_uring_sqe *sqe[space_check.sectors_to_write];
-        for (int i = 0; i < space_check.sectors_to_write; i++)
-        {
-            BS_SUBMIT_GET_SQE_DECL(sqe[i]);
-        }
+        // Check SQEs. Don't bother about merging, submit each journal sector as a separate request
+        BS_SUBMIT_CHECK_SQES(space_check.sectors_to_write);
         // Prepare and submit journal entries
         auto it = PRIV(op)->sync_big_writes.begin();
-        int s = 0, cur_sector = -1;
+        int s = 0;
         while (it != PRIV(op)->sync_big_writes.end())
         {
             if (!journal.entry_fits(sizeof(journal_entry_big_write) + clean_entry_bitmap_size) &&
                 journal.sector_info[journal.cur_sector].dirty)
             {
-                if (cur_sector == -1)
-                    PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-                prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], [this, op](ring_data_t *data) { handle_sync_event(data, op); });
-                cur_sector = journal.cur_sector;
+                prepare_journal_sector_write(journal.cur_sector, op);
+                s++;
             }
             auto & dirty_entry = dirty_db.at(*it);
             journal_entry_big_write *je = (journal_entry_big_write*)prefill_single_journal_entry(
@@ -129,12 +121,9 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
             journal.crc32_last = je->crc32;
             it++;
         }
-        prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], [this, op](ring_data_t *data) { handle_sync_event(data, op); });
+        prepare_journal_sector_write(journal.cur_sector, op);
+        s++;
         assert(s == space_check.sectors_to_write);
-        if (cur_sector == -1)
-            PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-        PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-        PRIV(op)->pending_ops = s;
         PRIV(op)->op_state = SYNC_JOURNAL_WRITE_SENT;
         return 1;
     }
@@ -145,7 +134,7 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
             BS_SUBMIT_GET_SQE(sqe, data);
             my_uring_prep_fsync(sqe, journal.fd, IORING_FSYNC_DATASYNC);
             data->iov = { 0 };
-            data->callback = [this, op](ring_data_t *data) { handle_sync_event(data, op); };
+            data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
             PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 0;
             PRIV(op)->pending_ops = 1;
             PRIV(op)->op_state = SYNC_JOURNAL_SYNC_SENT;
@@ -164,42 +153,6 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
     return 1;
 }
 
-void blockstore_impl_t::handle_sync_event(ring_data_t *data, blockstore_op_t *op)
-{
-    live = true;
-    if (data->res != data->iov.iov_len)
-    {
-        throw std::runtime_error(
-            "write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
-            "). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
-        );
-    }
-    PRIV(op)->pending_ops--;
-    if (PRIV(op)->pending_ops == 0)
-    {
-        // Release used journal sectors
-        release_journal_sectors(op);
-        // Handle states
-        if (PRIV(op)->op_state == SYNC_DATA_SYNC_SENT)
-        {
-            PRIV(op)->op_state = SYNC_DATA_SYNC_DONE;
-        }
-        else if (PRIV(op)->op_state == SYNC_JOURNAL_WRITE_SENT)
-        {
-            PRIV(op)->op_state = SYNC_JOURNAL_WRITE_DONE;
-        }
-        else if (PRIV(op)->op_state == SYNC_JOURNAL_SYNC_SENT)
-        {
-            PRIV(op)->op_state = SYNC_DONE;
-        }
-        else
-        {
-            throw std::runtime_error("BUG: unexpected sync op state");
-        }
-        ringloop->wakeup();
-    }
-}
-
 void blockstore_impl_t::ack_sync(blockstore_op_t *op)
 {
     // Handle states

src/blockstore_write.cpp

@@ -268,8 +268,8 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
             cancel_all_writes(op, dirty_it, -ENOSPC);
             return 2;
         }
-        write_iodepth++;
         BS_SUBMIT_GET_SQE(sqe, data);
+        write_iodepth++;
         dirty_it->second.location = loc << block_order;
         dirty_it->second.state = (dirty_it->second.state & ~BS_ST_WORKFLOW_MASK) | BS_ST_SUBMITTED;
 #ifdef BLOCKSTORE_DEBUG
@@ -324,29 +324,21 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
         {
             return 0;
         }
-        write_iodepth++;
-        // There is sufficient space. Get SQE(s)
-        struct io_uring_sqe *sqe1 = NULL;
-        if (immediate_commit != IMMEDIATE_NONE ||
-            !journal.entry_fits(sizeof(journal_entry_small_write) + clean_entry_bitmap_size))
-        {
+        // There is sufficient space. Check SQE(s)
+        BS_SUBMIT_CHECK_SQES(
             // Write current journal sector only if it's dirty and full, or in the immediate_commit mode
-            BS_SUBMIT_GET_SQE_DECL(sqe1);
-        }
-        struct io_uring_sqe *sqe2 = NULL;
-        if (op->len > 0)
-        {
-            BS_SUBMIT_GET_SQE_DECL(sqe2);
-        }
+            (immediate_commit != IMMEDIATE_NONE ||
+                !journal.entry_fits(sizeof(journal_entry_small_write) + clean_entry_bitmap_size) ? 1 : 0) +
+            (op->len > 0 ? 1 : 0)
+        );
+        write_iodepth++;
         // Got SQEs. Prepare previous journal sector write if required
         auto cb = [this, op](ring_data_t *data) { handle_write_event(data, op); };
         if (immediate_commit == IMMEDIATE_NONE)
         {
-            if (sqe1)
+            if (!journal.entry_fits(sizeof(journal_entry_small_write) + clean_entry_bitmap_size))
             {
-                prepare_journal_sector_write(journal, journal.cur_sector, sqe1, cb);
-                PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-                PRIV(op)->pending_ops++;
+                prepare_journal_sector_write(journal.cur_sector, op);
             }
             else
             {
@@ -380,9 +372,7 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
         journal.crc32_last = je->crc32;
         if (immediate_commit != IMMEDIATE_NONE)
         {
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe1, cb);
-            PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-            PRIV(op)->pending_ops++;
+            prepare_journal_sector_write(journal.cur_sector, op);
         }
         if (op->len > 0)
         {
@@ -392,7 +382,7 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
                 // Copy data
                 memcpy(journal.buffer + journal.next_free, op->buf, op->len);
             }
-            ring_data_t *data2 = ((ring_data_t*)sqe2->user_data);
+            BS_SUBMIT_GET_SQE(sqe2, data2);
             data2->iov = (struct iovec){ op->buf, op->len };
             data2->callback = cb;
             my_uring_prep_writev(
@@ -441,13 +431,12 @@ int blockstore_impl_t::continue_write(blockstore_op_t *op)
 resume_2:
     // Only for the immediate_commit mode: prepare and submit big_write journal entry
     {
+        BS_SUBMIT_CHECK_SQES(1);
         auto dirty_it = dirty_db.find((obj_ver_id){
             .oid = op->oid,
             .version = op->version,
         });
         assert(dirty_it != dirty_db.end());
-        io_uring_sqe *sqe = NULL;
-        BS_SUBMIT_GET_SQE_DECL(sqe);
         journal_entry_big_write *je = (journal_entry_big_write*)prefill_single_journal_entry(
             journal, op->opcode == BS_OP_WRITE_STABLE ? JE_BIG_WRITE_INSTANT : JE_BIG_WRITE,
             sizeof(journal_entry_big_write) + clean_entry_bitmap_size
@@ -469,10 +458,7 @@ resume_2:
         memcpy((void*)(je+1), (clean_entry_bitmap_size > sizeof(void*) ? dirty_it->second.bitmap : &dirty_it->second.bitmap), clean_entry_bitmap_size);
         je->crc32 = je_crc32((journal_entry*)je);
         journal.crc32_last = je->crc32;
-        prepare_journal_sector_write(journal, journal.cur_sector, sqe,
-            [this, op](ring_data_t *data) { handle_write_event(data, op); });
-        PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-        PRIV(op)->pending_ops = 1;
+        prepare_journal_sector_write(journal.cur_sector, op);
         PRIV(op)->op_state = 3;
         return 1;
     }
@@ -587,6 +573,7 @@ void blockstore_impl_t::handle_write_event(ring_data_t *data, blockstore_op_t *o
         );
     }
     PRIV(op)->pending_ops--;
+    assert(PRIV(op)->pending_ops >= 0);
     if (PRIV(op)->pending_ops == 0)
     {
         release_journal_sectors(op);
@@ -604,7 +591,6 @@ void blockstore_impl_t::release_journal_sectors(blockstore_op_t *op)
         uint64_t s = PRIV(op)->min_flushed_journal_sector;
         while (1)
         {
-            journal.sector_info[s-1].flush_count--;
             if (s != (1+journal.cur_sector) && journal.sector_info[s-1].flush_count == 0)
             {
                 // We know for sure that we won't write into this sector anymore
@@ -644,23 +630,19 @@ int blockstore_impl_t::dequeue_del(blockstore_op_t *op)
         return 0;
     }
     write_iodepth++;
-    io_uring_sqe *sqe = NULL;
-    if (immediate_commit != IMMEDIATE_NONE ||
-        (journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_del) &&
-        journal.sector_info[journal.cur_sector].dirty)
-    {
     // Write current journal sector only if it's dirty and full, or in the immediate_commit mode
-        BS_SUBMIT_GET_SQE_DECL(sqe);
-    }
-    auto cb = [this, op](ring_data_t *data) { handle_write_event(data, op); };
+    BS_SUBMIT_CHECK_SQES(
+        (immediate_commit != IMMEDIATE_NONE ||
+            (journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_del) &&
+            journal.sector_info[journal.cur_sector].dirty) ? 1 : 0
+    );
     // Prepare journal sector write
     if (immediate_commit == IMMEDIATE_NONE)
     {
-        if (sqe)
+        if ((journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_del) &&
+            journal.sector_info[journal.cur_sector].dirty)
         {
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe, cb);
-            PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-            PRIV(op)->pending_ops++;
+            prepare_journal_sector_write(journal.cur_sector, op);
         }
         else
         {
@@ -687,9 +669,7 @@ int blockstore_impl_t::dequeue_del(blockstore_op_t *op)
     dirty_it->second.state = BS_ST_DELETE | BS_ST_SUBMITTED;
     if (immediate_commit != IMMEDIATE_NONE)
     {
-        prepare_journal_sector_write(journal, journal.cur_sector, sqe, cb);
-        PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-        PRIV(op)->pending_ops++;
+        prepare_journal_sector_write(journal.cur_sector, op);
     }
     if (!PRIV(op)->pending_ops)
     {

src/cli.cpp

@@ -57,6 +57,7 @@ json11::Json::object cli_tool_t::parse_args(int narg, const char *args[])
             const char *opt = args[i]+2;
             cfg[opt] = i == narg-1 || !strcmp(opt, "json") || !strcmp(opt, "wait-list") ||
                 !strcmp(opt, "long") || !strcmp(opt, "del") || !strcmp(opt, "no-color") ||
+                !strcmp(opt, "readonly") || !strcmp(opt, "readwrite") ||
                 !strcmp(opt, "force") || !strcmp(opt, "reverse") ||
                 !strcmp(opt, "writers-stopped") && strcmp("1", args[i+1]) != 0
                 ? "1" : args[++i];
@@ -69,7 +70,7 @@ json11::Json::object cli_tool_t::parse_args(int narg, const char *args[])
     if (!cmd.size())
     {
         std::string exe(exe_name);
-        if (exe.substr(exe.size()-11) == "vitastor-rm")
+        if (exe.size() >= 11 && exe.substr(exe.size()-11) == "vitastor-rm")
         {
             cmd.push_back("rm-data");
         }
@@ -85,8 +86,11 @@ void cli_tool_t::help()
         "(c) Vitaliy Filippov, 2019+ (VNPL-1.1)\n"
         "\n"
         "USAGE:\n"
-        "%s ls [-l] [-p POOL] [--sort FIELD] [-r] [-n N] [<name> ...]\n"
-        "  List images (only specified if <name> passed).\n"
+        "%s df\n"
+        "  Show pool space statistics\n"
+        "\n"
+        "%s ls [-l] [-p POOL] [--sort FIELD] [-r] [-n N] [<glob> ...]\n"
+        "  List images (only matching <glob> patterns if passed).\n"
         "  -p|--pool POOL  Filter images by pool ID or name\n"
         "  -l|--long       Also report allocated size and I/O statistics\n"
         "  --del           Also include delete operation statistics\n"
@@ -103,8 +107,8 @@ void cli_tool_t::help()
         "%s snap-create [-p|--pool <id|name>] <image>@<snapshot>\n"
         "  Create a snapshot of image <name>. May be used live if only a single writer is active.\n"
         "\n"
-        "%s modify <name> [-s|--size <size>] [--readonly | --readwrite] [-f|--force]\n"
-        "  Resize image or change its readonly status. Images with children can't be made read-write.\n"
+        "%s modify <name> [--rename <new-name>] [--resize <size>] [--readonly | --readwrite] [-f|--force]\n"
+        "  Rename, resize image or change its readonly status. Images with children can't be made read-write.\n"
         "  If the new size is smaller than the old size, extra data will be purged.\n"
         "  You should resize file system in the image, if present, before shrinking it.\n"
         "  -f|--force  Proceed with shrinking or setting readwrite flag even if the image has children.\n"
@@ -151,7 +155,8 @@ void cli_tool_t::help()
         "  --no-color          Disable colored output\n"
         "  --json              JSON output\n"
         ,
-        exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name
+        exe_name, exe_name, exe_name, exe_name, exe_name, exe_name,
+        exe_name, exe_name, exe_name, exe_name, exe_name, exe_name
     );
     exit(0);
 }
@@ -245,6 +250,11 @@ void cli_tool_t::run(json11::Json cfg)
         fprintf(stderr, "command is missing\n");
         exit(1);
     }
+    else if (cmd[0] == "df")
+    {
+        // Show pool space stats
+        action_cb = start_df(cfg);
+    }
     else if (cmd[0] == "ls")
     {
         // List images
@@ -295,6 +305,10 @@ void cli_tool_t::run(json11::Json cfg)
         fprintf(stderr, "unknown command: %s\n", cmd[0].string_value().c_str());
         exit(1);
     }
+    if (action_cb == NULL)
+    {
+        return;
+    }
     color = !cfg["no-color"].bool_value();
     json_output = cfg["json"].bool_value();
     iodepth = cfg["iodepth"].uint64_value();

src/cli.h

@@ -50,6 +50,7 @@ public:
     friend struct snap_flattener_t;
     friend struct snap_remover_t;
 
+    std::function<bool(void)> start_df(json11::Json);
     std::function<bool(void)> start_ls(json11::Json);
     std::function<bool(void)> start_create(json11::Json);
     std::function<bool(void)> start_modify(json11::Json);
@@ -61,5 +62,14 @@ public:
     std::function<bool(void)> simple_offsets(json11::Json cfg);
 };
 
-std::string format_size(uint64_t size);
 uint64_t parse_size(std::string size_str);
+
+std::string print_table(json11::Json items, json11::Json header, bool use_esc);
+
+std::string format_size(uint64_t size);
+
+std::string format_lat(uint64_t lat);
+
+std::string format_q(double depth);
+
+bool stupid_glob(const std::string str, const std::string glob);

src/cli_alloc_osd.cpp

@@ -124,7 +124,7 @@ std::function<bool(void)> cli_tool_t::start_alloc_osd(json11::Json cfg, uint64_t
     json11::Json::array cmd = cfg["command"].array_items();
     auto alloc_osd = new alloc_osd_t();
     alloc_osd->parent = this;
-    return [alloc_osd, &out]()
+    return [alloc_osd, out]()
     {
         alloc_osd->loop();
         if (alloc_osd->is_done())

src/cli_create.cpp

@@ -49,7 +49,8 @@ struct image_creator_t
             auto & pools = parent->cli->st_cli.pool_config;
             if (pools.find(new_pool_id) == pools.end())
             {
-                new_pool_id = 0;
+                fprintf(stderr, "Pool %u does not exist\n", new_pool_id);
+                exit(1);
             }
         }
         else if (new_pool_name != "")
@@ -62,24 +63,17 @@ struct image_creator_t
                     break;
                 }
             }
+            if (!new_pool_id)
+            {
+                fprintf(stderr, "Pool %s does not exist\n", new_pool_name.c_str());
+                exit(1);
+            }
         }
         else if (parent->cli->st_cli.pool_config.size() == 1)
         {
             auto it = parent->cli->st_cli.pool_config.begin();
             new_pool_id = it->first;
         }
-        if (!new_pool_id)
-        {
-            if (new_pool_name == "")
-            {
-                fprintf(stderr, "Pool name or ID is missing\n");
-            }
-            else
-            {
-                fprintf(stderr, "Pool %s does not exist\n", new_pool_name.c_str());
-            }
-            exit(1);
-        }
         state = 1;
     resume_1:
         if (new_snap == "")
@@ -94,11 +88,6 @@ struct image_creator_t
             goto resume_2;
         else if (state == 3)
             goto resume_3;
-        if (!size)
-        {
-            fprintf(stderr, "Image size is missing\n");
-            exit(1);
-        }
         for (auto & ic: parent->cli->st_cli.inode_config)
         {
             if (ic.second.name == image_name)
@@ -106,6 +95,33 @@ struct image_creator_t
                 fprintf(stderr, "Image %s already exists\n", image_name.c_str());
                 exit(1);
             }
+            if (ic.second.name == new_parent)
+            {
+                new_parent_id = ic.second.num;
+                if (!new_pool_id)
+                {
+                    new_pool_id = INODE_POOL(ic.second.num);
+                }
+                if (!size)
+                {
+                    size = ic.second.size;
+                }
+            }
+        }
+        if (new_parent != "" && !new_parent_id)
+        {
+            fprintf(stderr, "Parent image not found\n");
+            exit(1);
+        }
+        if (!new_pool_id)
+        {
+            fprintf(stderr, "Pool name or ID is missing\n");
+            exit(1);
+        }
+        if (!size)
+        {
+            fprintf(stderr, "Image size is missing\n");
+            exit(1);
         }
         do
         {
@@ -152,6 +168,11 @@ resume_3:
                 exit(1);
             }
         }
+        if (new_parent != "")
+        {
+            fprintf(stderr, "--parent can't be used with snapshots\n");
+            exit(1);
+        }
         do
         {
             // In addition to next_id, get: size, old_id, old_pool_id, new_parent, cfg_mod_rev, idx_mod_rev
@@ -165,6 +186,11 @@ resume_3:
                 fprintf(stderr, "Image %s does not exist\n", image_name.c_str());
                 exit(1);
             }
+            if (!new_pool_id)
+            {
+                // Create snapshot in the same pool by default
+                new_pool_id = old_pool_id;
+            }
             attempt_create();
             state = 4;
 resume_4:
@@ -439,6 +465,10 @@ resume_3:
 
 uint64_t parse_size(std::string size_str)
 {
+    if (!size_str.length())
+    {
+        return 0;
+    }
     uint64_t mul = 1;
     char type_char = tolower(size_str[size_str.length()-1]);
     if (type_char == 'k' || type_char == 'm' || type_char == 'g' || type_char == 't')

src/cli_df.cpp

@@ -0,0 +1,229 @@
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1 (see README.md for details)
+
+#include "cli.h"
+#include "cluster_client.h"
+#include "base64.h"
+
+// List pools with space statistics
+struct pool_lister_t
+{
+    cli_tool_t *parent;
+
+    int state = 0;
+    json11::Json space_info;
+    std::map<pool_id_t, json11::Json::object> pool_stats;
+
+    bool is_done()
+    {
+        return state == 100;
+    }
+
+    void get_stats()
+    {
+        if (state == 1)
+            goto resume_1;
+        // Space statistics - pool/stats/<pool>
+        parent->waiting++;
+        parent->cli->st_cli.etcd_txn(json11::Json::object {
+            { "success", json11::Json::array {
+                json11::Json::object {
+                    { "request_range", json11::Json::object {
+                        { "key", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/pool/stats/"
+                        ) },
+                        { "range_end", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/pool/stats0"
+                        ) },
+                    } },
+                },
+                json11::Json::object {
+                    { "request_range", json11::Json::object {
+                        { "key", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/osd/stats/"
+                        ) },
+                        { "range_end", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/osd/stats0"
+                        ) },
+                    } },
+                },
+            } },
+        }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
+        {
+            parent->waiting--;
+            if (err != "")
+            {
+                fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
+                exit(1);
+            }
+            space_info = res;
+            parent->ringloop->wakeup();
+        });
+        state = 1;
+resume_1:
+        if (parent->waiting > 0)
+            return;
+        std::map<pool_id_t, uint64_t> osd_free;
+        for (auto & kv_item: space_info["responses"][0]["response_range"]["kvs"].array_items())
+        {
+            auto kv = parent->cli->st_cli.parse_etcd_kv(kv_item);
+            // pool ID
+            pool_id_t pool_id;
+            char null_byte = 0;
+            sscanf(kv.key.substr(parent->cli->st_cli.etcd_prefix.length()).c_str(), "/pool/stats/%u%c", &pool_id, &null_byte);
+            if (!pool_id || pool_id >= POOL_ID_MAX || null_byte != 0)
+            {
+                fprintf(stderr, "Invalid key in etcd: %s\n", kv.key.c_str());
+                continue;
+            }
+            // pool/stats/<N>
+            pool_stats[pool_id] = kv.value.object_items();
+        }
+        for (auto & kv_item: space_info["responses"][1]["response_range"]["kvs"].array_items())
+        {
+            auto kv = parent->cli->st_cli.parse_etcd_kv(kv_item);
+            // osd ID
+            osd_num_t osd_num;
+            char null_byte = 0;
+            sscanf(kv.key.substr(parent->cli->st_cli.etcd_prefix.length()).c_str(), "/osd/stats/%lu%c", &osd_num, &null_byte);
+            if (!osd_num || osd_num >= POOL_ID_MAX || null_byte != 0)
+            {
+                fprintf(stderr, "Invalid key in etcd: %s\n", kv.key.c_str());
+                continue;
+            }
+            // osd/stats/<N>::free
+            osd_free[osd_num] = kv.value["free"].uint64_value();
+        }
+        // Calculate max_avail for each pool
+        for (auto & pp: parent->cli->st_cli.pool_config)
+        {
+            auto & pool_cfg = pp.second;
+            uint64_t pool_avail = UINT64_MAX;
+            std::map<osd_num_t, uint64_t> pg_per_osd;
+            for (auto & pgp: pool_cfg.pg_config)
+            {
+                for (auto pg_osd: pgp.second.target_set)
+                {
+                    if (pg_osd != 0)
+                    {
+                        pg_per_osd[pg_osd]++;
+                    }
+                }
+            }
+            for (auto pg_per_pair: pg_per_osd)
+            {
+                uint64_t pg_free = osd_free[pg_per_pair.first] * pool_cfg.pg_count / pg_per_pair.second;
+                if (pool_avail > pg_free)
+                {
+                    pool_avail = pg_free;
+                }
+            }
+            if (pool_cfg.scheme != POOL_SCHEME_REPLICATED)
+            {
+                pool_avail = pool_avail * (pool_cfg.pg_size - pool_cfg.parity_chunks) / pool_stats[pool_cfg.id]["pg_real_size"].uint64_value();
+            }
+            pool_stats[pool_cfg.id] = json11::Json::object {
+                { "name", pool_cfg.name },
+                { "pg_count", pool_cfg.pg_count },
+                { "scheme", pool_cfg.scheme == POOL_SCHEME_REPLICATED ? "replicated" : "jerasure" },
+                { "scheme_name", pool_cfg.scheme == POOL_SCHEME_REPLICATED
+                    ? std::to_string(pool_cfg.pg_size)+"/"+std::to_string(pool_cfg.pg_minsize)
+                    : "EC "+std::to_string(pool_cfg.pg_size-pool_cfg.parity_chunks)+"+"+std::to_string(pool_cfg.parity_chunks) },
+                { "used_raw", (uint64_t)(pool_stats[pool_cfg.id]["used_raw_tb"].number_value() * (1l<<40)) },
+                { "total_raw", (uint64_t)(pool_stats[pool_cfg.id]["total_raw_tb"].number_value() * (1l<<40)) },
+                { "max_available", pool_avail },
+                { "raw_to_usable", pool_stats[pool_cfg.id]["raw_to_usable"].number_value() },
+                { "space_efficiency", pool_stats[pool_cfg.id]["space_efficiency"].number_value() },
+                { "pg_real_size", pool_stats[pool_cfg.id]["pg_real_size"].uint64_value() },
+                { "failure_domain", pool_cfg.failure_domain },
+            };
+        }
+    }
+
+    json11::Json::array to_list()
+    {
+        json11::Json::array list;
+        for (auto & kv: pool_stats)
+        {
+            list.push_back(kv.second);
+        }
+        return list;
+    }
+
+    void loop()
+    {
+        get_stats();
+        if (parent->waiting > 0)
+            return;
+        if (parent->json_output)
+        {
+            // JSON output
+            printf("%s\n", json11::Json(to_list()).dump().c_str());
+            state = 100;
+            return;
+        }
+        // Table output: name, scheme_name, pg_count, total, used, max_avail, used%, efficiency
+        json11::Json::array cols;
+        cols.push_back(json11::Json::object{
+            { "key", "name" },
+            { "title", "NAME" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "scheme_name" },
+            { "title", "SCHEME" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "pg_count" },
+            { "title", "PGS" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "total_fmt" },
+            { "title", "TOTAL" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "used_fmt" },
+            { "title", "USED" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "max_avail_fmt" },
+            { "title", "AVAILABLE" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "used_pct" },
+            { "title", "USED%" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "eff_fmt" },
+            { "title", "EFFICIENCY" },
+        });
+        json11::Json::array list;
+        for (auto & kv: pool_stats)
+        {
+            kv.second["total_fmt"] = format_size(kv.second["total_raw"].uint64_value() / kv.second["raw_to_usable"].number_value());
+            kv.second["used_fmt"] = format_size(kv.second["used_raw"].uint64_value() / kv.second["raw_to_usable"].number_value());
+            kv.second["max_avail_fmt"] = format_size(kv.second["max_available"].uint64_value());
+            kv.second["used_pct"] = format_q(100 - 100*kv.second["max_available"].uint64_value() *
+                kv.second["raw_to_usable"].number_value() / kv.second["total_raw"].uint64_value())+"%";
+            kv.second["eff_fmt"] = format_q(kv.second["space_efficiency"].number_value()*100)+"%";
+        }
+        printf("%s", print_table(to_list(), cols, parent->color).c_str());
+        state = 100;
+    }
+};
+
+std::function<bool(void)> cli_tool_t::start_df(json11::Json cfg)
+{
+    json11::Json::array cmd = cfg["command"].array_items();
+    auto lister = new pool_lister_t();
+    lister->parent = this;
+    return [lister]()
+    {
+        lister->loop();
+        if (lister->is_done())
+        {
+            delete lister;
+            return true;
+        }
+        return false;
+    };
+}

src/cli_ls.cpp

@@ -6,16 +6,6 @@
 #include "cluster_client.h"
 #include "base64.h"
 
-#define MIN(a, b) ((a) < (b) ? (b) : (a))
-
-std::string print_table(json11::Json items, json11::Json header, bool use_esc);
-
-std::string format_size(uint64_t size);
-
-std::string format_lat(uint64_t lat);
-
-std::string format_q(double depth);
-
 // List existing images
 //
 // Again, you can just look into etcd, but this console tool incapsulates it
@@ -213,10 +203,21 @@ resume_1:
         json11::Json::array list;
         for (auto & kv: stats)
         {
-            if (!only_names.size() || only_names.find(kv.second["name"].string_value()) != only_names.end())
+            if (!only_names.size())
             {
                 list.push_back(kv.second);
             }
+            else
+            {
+                for (auto glob: only_names)
+                {
+                    if (stupid_glob(kv.second["name"].string_value(), glob))
+                    {
+                        list.push_back(kv.second);
+                        break;
+                    }
+                }
+            }
         }
         if (sort_field == "name" || sort_field == "pool_name")
         {
@@ -355,6 +356,9 @@ resume_1:
                 kv.second["read_bw"] = format_size(kv.second["read_bps"].uint64_value())+"/s";
                 kv.second["write_bw"] = format_size(kv.second["write_bps"].uint64_value())+"/s";
                 kv.second["delete_bw"] = format_size(kv.second["delete_bps"].uint64_value())+"/s";
+                kv.second["read_iops"] = format_q(kv.second["read_iops"].number_value());
+                kv.second["write_iops"] = format_q(kv.second["write_iops"].number_value());
+                kv.second["delete_iops"] = format_q(kv.second["delete_iops"].number_value());
                 kv.second["read_lat_f"] = format_lat(kv.second["read_lat"].uint64_value());
                 kv.second["write_lat_f"] = format_lat(kv.second["write_lat"].uint64_value());
                 kv.second["delete_lat_f"] = format_lat(kv.second["delete_lat"].uint64_value());
@@ -493,6 +497,62 @@ std::string format_q(double depth)
     return std::string(buf);
 }
 
+struct glob_stack_t
+{
+    int glob_pos;
+    int str_pos;
+};
+
+// Yes I know I could do it by translating the pattern to std::regex O:-)
+bool stupid_glob(const std::string str, const std::string glob)
+{
+    std::vector<glob_stack_t> wildcards;
+    int pos = 0, gp = 0;
+    bool m;
+back:
+    while (true)
+    {
+        if (gp >= glob.length())
+        {
+            if (pos >= str.length())
+                return true;
+            m = false;
+        }
+        else if (glob[gp] == '*')
+        {
+            wildcards.push_back((glob_stack_t){ .glob_pos = ++gp, .str_pos = pos });
+            continue;
+        }
+        else if (glob[gp] == '?')
+            m = pos < str.size();
+        else
+        {
+            if (glob[gp] == '\\' && gp < glob.length()-1)
+                gp++;
+            m = pos < str.size() && str[pos] == glob[gp];
+        }
+        if (!m)
+        {
+            while (wildcards.size() > 0)
+            {
+                // Backtrack
+                pos = (++wildcards[wildcards.size()-1].str_pos);
+                if (pos > str.size())
+                    wildcards.pop_back();
+                else
+                {
+                    gp = wildcards[wildcards.size()-1].glob_pos;
+                    goto back;
+                }
+            }
+            return false;
+        }
+        pos++;
+        gp++;
+    }
+    return true;
+}
+
 std::function<bool(void)> cli_tool_t::start_ls(json11::Json cfg)
 {
     json11::Json::array cmd = cfg["command"].array_items();

src/cli_modify.cpp

@@ -5,12 +5,13 @@
 #include "cluster_client.h"
 #include "base64.h"
 
-// Resize image (purging extra data on shrink) or change its readonly status
+// Rename, resize image (and purge extra data on shrink) or change its readonly status
 struct image_changer_t
 {
     cli_tool_t *parent;
 
     std::string image_name;
+    std::string new_name;
     uint64_t new_size = 0;
     bool set_readonly = false, set_readwrite = false, force = false;
     // interval between fsyncs
@@ -18,7 +19,7 @@ struct image_changer_t
 
     uint64_t inode_num = 0;
     inode_config_t cfg;
-    std::string cur_cfg_key;
+    json11::Json::array checks, success;
     bool has_children = false;
 
     int state = 0;
@@ -43,6 +44,11 @@ struct image_changer_t
                 cfg = ic.second;
                 break;
             }
+            if (new_name != "" && ic.second.name == new_name)
+            {
+                fprintf(stderr, "Image %s already exists\n", new_name.c_str());
+                exit(1);
+            }
         }
         if (!inode_num)
         {
@@ -57,14 +63,23 @@ struct image_changer_t
                 break;
             }
         }
+        if ((!set_readwrite || !cfg.readonly) &&
+            (!set_readonly || cfg.readonly) &&
+            (!new_size || cfg.size == new_size) &&
+            (new_name == "" || new_name == image_name))
+        {
+            printf("No change\n");
+            state = 100;
+            return;
+        }
         if (new_size != 0)
         {
             if (cfg.size >= new_size)
             {
-                // Check confirmation if trimming an image with children
+                // Check confirmation when trimming an image with children
                 if (has_children && !force)
                 {
-                    fprintf(stderr, "Image %s has children. Refusing to shrink it without --force", image_name.c_str());
+                    fprintf(stderr, "Image %s has children. Refusing to shrink it without --force\n", image_name.c_str());
                     exit(1);
                 }
                 // Shrink the image first
@@ -91,36 +106,74 @@ resume_1:
         if (set_readwrite)
         {
             cfg.readonly = false;
-            // Check confirmation if trimming an image with children
-            if (!force)
+            // Check confirmation when making an image with children read-write
+            if (has_children && !force)
             {
-                fprintf(stderr, "Image %s has children. Refusing to make it read-write without --force", image_name.c_str());
+                fprintf(stderr, "Image %s has children. Refusing to make it read-write without --force\n", image_name.c_str());
                 exit(1);
             }
         }
-        cur_cfg_key = base64_encode(parent->cli->st_cli.etcd_prefix+
+        if (new_name != "")
+        {
+            cfg.name = new_name;
+        }
+        {
+            std::string cur_cfg_key = base64_encode(parent->cli->st_cli.etcd_prefix+
                 "/config/inode/"+std::to_string(INODE_POOL(inode_num))+
                 "/"+std::to_string(INODE_NO_POOL(inode_num)));
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
-            { "compare", json11::Json::array {
-                json11::Json::object {
+            checks.push_back(json11::Json::object {
                 { "target", "MOD" },
                 { "key", cur_cfg_key },
                 { "result", "LESS" },
                 { "mod_revision", cfg.mod_revision+1 },
-                },
-            } },
-            { "success", json11::Json::array {
-                json11::Json::object {
+            });
+            success.push_back(json11::Json::object {
                 { "request_put", json11::Json::object {
                     { "key", cur_cfg_key },
                     { "value", base64_encode(json11::Json(
                         parent->cli->st_cli.serialize_inode_cfg(&cfg)
                     ).dump()) },
                 } }
-                },
-            } },
+            });
+        }
+        if (new_name != "")
+        {
+            std::string old_idx_key = base64_encode(
+                parent->cli->st_cli.etcd_prefix+"/index/image/"+image_name
+            );
+            std::string new_idx_key = base64_encode(
+                parent->cli->st_cli.etcd_prefix+"/index/image/"+new_name
+            );
+            checks.push_back(json11::Json::object {
+                { "target", "MOD" },
+                { "key", old_idx_key },
+                { "result", "LESS" },
+                { "mod_revision", cfg.mod_revision+1 },
+            });
+            checks.push_back(json11::Json::object {
+                { "target", "VERSION" },
+                { "version", 0 },
+                { "key", new_idx_key },
+            });
+            success.push_back(json11::Json::object {
+                { "request_delete_range", json11::Json::object {
+                    { "key", old_idx_key },
+                } }
+            });
+            success.push_back(json11::Json::object {
+                { "request_put", json11::Json::object {
+                    { "key", new_idx_key },
+                    { "value", base64_encode(json11::Json(json11::Json::object{
+                        { "id", INODE_NO_POOL(inode_num) },
+                        { "pool_id", (uint64_t)INODE_POOL(inode_num) },
+                    }).dump()) },
+                } }
+            });
+        }
+        parent->waiting++;
+        parent->cli->st_cli.etcd_txn(json11::Json::object {
+            { "compare", checks },
+            { "success", success },
         }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
         {
             if (err != "")
@@ -140,7 +193,7 @@ resume_1:
 resume_2:
         if (parent->waiting > 0)
             return;
-        printf("Image %s changed\n", image_name.c_str());
+        printf("Image %s modified\n", image_name.c_str());
         state = 100;
     }
 };
@@ -156,7 +209,8 @@ std::function<bool(void)> cli_tool_t::start_modify(json11::Json cfg)
         fprintf(stderr, "Image name is missing\n");
         exit(1);
     }
-    changer->new_size = cfg["size"].uint64_value();
+    changer->new_name = cfg["rename"].string_value();
+    changer->new_size = parse_size(cfg["resize"].string_value());
     if (changer->new_size != 0 && (changer->new_size % 4096))
     {
         fprintf(stderr, "Image size should be a multiple of 4096\n");

src/cli_snap_rm.cpp

@@ -468,6 +468,8 @@ resume_9:
                     { "request_delete_range", json11::Json::object {
                         { "key", cur_cfg_key },
                     } },
+                },
+                json11::Json::object {
                     { "request_delete_range", json11::Json::object {
                         { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/index/image/"+cur_name) },
                     } },

src/cluster_client.cpp

@@ -64,6 +64,7 @@ cluster_client_t::cluster_client_t(ring_loop_t *ringloop, timerfd_manager_t *tfd
     st_cli.on_change_osd_state_hook = [this](uint64_t peer_osd) { on_change_osd_state_hook(peer_osd); };
     st_cli.on_change_hook = [this](std::map<std::string, etcd_kv_t> & changes) { on_change_hook(changes); };
     st_cli.on_load_pgs_hook = [this](bool success) { on_load_pgs_hook(success); };
+    st_cli.on_reload_hook = [this]() { st_cli.load_global_config(); };
 
     st_cli.parse_config(config);
     st_cli.load_global_config();

src/etcd_state_client.cpp

@@ -17,6 +17,11 @@ etcd_state_client_t::~etcd_state_client_t()
     }
     watches.clear();
     etcd_watches_initialised = -1;
+    if (ws_keepalive_timer >= 0)
+    {
+        tfd->clear_timer(ws_keepalive_timer);
+        ws_keepalive_timer = -1;
+    }
 #ifndef __MOCK__
     if (etcd_watch_ws)
     {
@@ -50,12 +55,13 @@ void etcd_state_client_t::etcd_txn(json11::Json txn, int timeout, std::function<
 
 void etcd_state_client_t::etcd_call(std::string api, json11::Json payload, int timeout, std::function<void(std::string, json11::Json)> callback)
 {
-    if (!etcd_addresses.size())
+    if (!etcd_addresses.size() && !etcd_local.size())
     {
         fprintf(stderr, "etcd_address is missing in Vitastor configuration\n");
         exit(1);
     }
-    std::string etcd_address = etcd_addresses[rand() % etcd_addresses.size()];
+    pick_next_etcd();
+    std::string etcd_address = selected_etcd_address;
     std::string etcd_api_path;
     int pos = etcd_address.find('/');
     if (pos >= 0)
@@ -70,7 +76,12 @@ void etcd_state_client_t::etcd_call(std::string api, json11::Json payload, int t
         "Content-Length: "+std::to_string(req.size())+"\r\n"
         "Connection: close\r\n"
         "\r\n"+req;
-    http_request_json(tfd, etcd_address, req, timeout, callback);
+    http_request_json(tfd, etcd_address, req, timeout, [this, cur_addr = selected_etcd_address, callback](std::string err, json11::Json data)
+    {
+        if (err != "" && cur_addr == selected_etcd_address)
+            selected_etcd_address = "";
+        callback(err, data);
+    });
 }
 
 void etcd_state_client_t::add_etcd_url(std::string addr)
@@ -84,8 +95,29 @@ void etcd_state_client_t::add_etcd_url(std::string addr)
             fprintf(stderr, "HTTPS is unsupported for etcd. Either use plain HTTP or setup a local proxy for etcd interaction\n");
             exit(1);
         }
-        if (addr.find('/') == std::string::npos)
+        if (!local_ips.size())
+            local_ips = getifaddr_list();
+        std::string check_addr;
+        int pos = addr.find('/');
+        int pos2 = addr.find(':');
+        if (pos2 >= 0)
+            check_addr = addr.substr(0, pos2);
+        else if (pos >= 0)
+            check_addr = addr.substr(0, pos);
+        else
+            check_addr = addr;
+        if (pos == std::string::npos)
             addr += "/v3";
+        int i;
+        for (i = 0; i < local_ips.size(); i++)
+        {
+            if (local_ips[i] == check_addr)
+            {
+                this->etcd_local.push_back(addr);
+                break;
+            }
+        }
+        if (i >= local_ips.size())
             this->etcd_addresses.push_back(addr);
     }
 }
@@ -125,14 +157,38 @@ void etcd_state_client_t::parse_config(const json11::Json & config)
     this->log_level = config["log_level"].int64_value();
 }
 
+void etcd_state_client_t::pick_next_etcd()
+{
+    if (selected_etcd_address != "")
+        return;
+    if (addresses_to_try.size() == 0)
+    {
+        // Prefer local etcd, if any
+        for (int i = 0; i < etcd_local.size(); i++)
+            addresses_to_try.push_back(etcd_local[i]);
+        std::vector<int> ns;
+        for (int i = 0; i < etcd_addresses.size(); i++)
+            ns.push_back(i);
+        while (ns.size())
+        {
+            int i = rand() % ns.size();
+            addresses_to_try.push_back(etcd_addresses[ns[i]]);
+            ns.erase(ns.begin()+i, ns.begin()+i+1);
+        }
+    }
+    selected_etcd_address = addresses_to_try[0];
+    addresses_to_try.erase(addresses_to_try.begin(), addresses_to_try.begin()+1);
+}
+
 void etcd_state_client_t::start_etcd_watcher()
 {
-    if (!etcd_addresses.size())
+    if (!etcd_addresses.size() && !etcd_local.size())
     {
         fprintf(stderr, "etcd_address is missing in Vitastor configuration\n");
         exit(1);
     }
-    std::string etcd_address = etcd_addresses[rand() % etcd_addresses.size()];
+    pick_next_etcd();
+    std::string etcd_address = selected_etcd_address;
     std::string etcd_api_path;
     int pos = etcd_address.find('/');
     if (pos >= 0)
@@ -141,10 +197,18 @@ void etcd_state_client_t::start_etcd_watcher()
         etcd_address = etcd_address.substr(0, pos);
     }
     etcd_watches_initialised = 0;
-    etcd_watch_ws = open_websocket(tfd, etcd_address, etcd_api_path+"/watch", ETCD_SLOW_TIMEOUT, [this](const http_response_t *msg)
+    ws_alive = 1;
+    if (etcd_watch_ws)
+    {
+        etcd_watch_ws->close();
+        etcd_watch_ws = NULL;
+    }
+    etcd_watch_ws = open_websocket(tfd, etcd_address, etcd_api_path+"/watch", ETCD_SLOW_TIMEOUT,
+        [this, cur_addr = selected_etcd_address](const http_response_t *msg)
     {
         if (msg->body.length())
         {
+            ws_alive = 1;
             std::string json_err;
             json11::Json data = json11::Json::parse(msg->body, json_err);
             if (json_err != "")
@@ -157,9 +221,39 @@ void etcd_state_client_t::start_etcd_watcher()
                 {
                     etcd_watches_initialised++;
                 }
+                if (data["result"]["canceled"].bool_value())
+                {
+                    // etcd watch canceled, maybe because the revision was compacted
+                    if (data["result"]["compact_revision"].uint64_value())
+                    {
+                        // we may miss events if we proceed
+                        // so we should restart from the beginning if we can
+                        if (on_reload_hook != NULL)
+                        {
+                            fprintf(stderr, "Revisions before %lu were compacted by etcd, reloading state\n",
+                                data["result"]["compact_revision"].uint64_value());
+                            etcd_watch_ws->close();
+                            etcd_watch_ws = NULL;
+                            etcd_watch_revision = 0;
+                            on_reload_hook();
+                        }
+                        else
+                        {
+                            fprintf(stderr, "Revisions before %lu were compacted by etcd, exiting\n",
+                                data["result"]["compact_revision"].uint64_value());
+                            exit(1);
+                        }
+                    }
+                    else
+                    {
+                        fprintf(stderr, "Watch canceled by etcd, reason: %s, exiting\n", data["result"]["cancel_reason"].string_value().c_str());
+                        exit(1);
+                    }
+                }
                 if (etcd_watches_initialised == 4)
                 {
-                    etcd_watch_revision = data["result"]["header"]["revision"].uint64_value();
+                    etcd_watch_revision = data["result"]["header"]["revision"].uint64_value()+1;
+                    addresses_to_try.clear();
                 }
                 // First gather all changes into a hash to remove multiple overwrites
                 std::map<std::string, etcd_kv_t> changes;
@@ -188,11 +282,15 @@ void etcd_state_client_t::start_etcd_watcher()
         }
         if (msg->eof)
         {
+            if (cur_addr == selected_etcd_address)
+            {
+                selected_etcd_address = "";
+            }
             etcd_watch_ws = NULL;
             if (etcd_watches_initialised == 0)
             {
-                // Connection not established, retry in <ETCD_SLOW_TIMEOUT>
-                tfd->set_timer(ETCD_SLOW_TIMEOUT, false, [this](int)
+                // Connection not established, retry in <ETCD_QUICK_TIMEOUT>
+                tfd->set_timer(ETCD_QUICK_TIMEOUT, false, [this](int)
                 {
                     start_etcd_watcher();
                 });
@@ -208,7 +306,7 @@ void etcd_state_client_t::start_etcd_watcher()
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/config/") },
             { "range_end", base64_encode(etcd_prefix+"/config0") },
-            { "start_revision", etcd_watch_revision+1 },
+            { "start_revision", etcd_watch_revision },
             { "watch_id", ETCD_CONFIG_WATCH_ID },
             { "progress_notify", true },
         } }
@@ -217,7 +315,7 @@ void etcd_state_client_t::start_etcd_watcher()
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/osd/state/") },
             { "range_end", base64_encode(etcd_prefix+"/osd/state0") },
-            { "start_revision", etcd_watch_revision+1 },
+            { "start_revision", etcd_watch_revision },
             { "watch_id", ETCD_OSD_STATE_WATCH_ID },
             { "progress_notify", true },
         } }
@@ -226,7 +324,7 @@ void etcd_state_client_t::start_etcd_watcher()
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/pg/state/") },
             { "range_end", base64_encode(etcd_prefix+"/pg/state0") },
-            { "start_revision", etcd_watch_revision+1 },
+            { "start_revision", etcd_watch_revision },
             { "watch_id", ETCD_PG_STATE_WATCH_ID },
             { "progress_notify", true },
         } }
@@ -235,11 +333,34 @@ void etcd_state_client_t::start_etcd_watcher()
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/pg/history/") },
             { "range_end", base64_encode(etcd_prefix+"/pg/history0") },
-            { "start_revision", etcd_watch_revision+1 },
+            { "start_revision", etcd_watch_revision },
             { "watch_id", ETCD_PG_HISTORY_WATCH_ID },
             { "progress_notify", true },
         } }
     }).dump());
+    if (ws_keepalive_timer < 0)
+    {
+        ws_keepalive_timer = tfd->set_timer(ETCD_KEEPALIVE_TIMEOUT, true, [this](int)
+        {
+            if (!etcd_watch_ws)
+            {
+                // Do nothing
+            }
+            else if (!ws_alive)
+            {
+                etcd_watch_ws->close();
+                etcd_watch_ws = NULL;
+                start_etcd_watcher();
+            }
+            else
+            {
+                ws_alive = 0;
+                etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+                    { "progress_request", json11::Json::object { } }
+                }).dump());
+            }
+        });
+    }
 }
 
 void etcd_state_client_t::load_global_config()
@@ -337,7 +458,7 @@ void etcd_state_client_t::load_pgs()
         }
         if (!etcd_watch_revision)
         {
-            etcd_watch_revision = data["header"]["revision"].uint64_value();
+            etcd_watch_revision = data["header"]["revision"].uint64_value()+1;
         }
         for (auto & res: data["responses"].array_items())
         {
@@ -784,3 +905,8 @@ json11::Json::object etcd_state_client_t::serialize_inode_cfg(inode_config_t *cf
     }
     return new_cfg;
 }
+
+int etcd_state_client_t::address_count()
+{
+    return etcd_addresses.size() + etcd_local.size();
+}

src/etcd_state_client.h

@@ -15,6 +15,7 @@
 #define MAX_ETCD_ATTEMPTS 5
 #define ETCD_SLOW_TIMEOUT 5000
 #define ETCD_QUICK_TIMEOUT 1000
+#define ETCD_KEEPALIVE_TIMEOUT 30000
 
 #define DEFAULT_BLOCK_SIZE 128*1024
 
@@ -75,12 +76,19 @@ struct websocket_t;
 struct etcd_state_client_t
 {
 protected:
+    std::vector<std::string> local_ips;
+    std::vector<std::string> etcd_addresses;
+    std::vector<std::string> etcd_local;
+    std::string selected_etcd_address;
+    std::vector<std::string> addresses_to_try;
     std::vector<inode_watch_t*> watches;
     websocket_t *etcd_watch_ws = NULL;
+    int ws_keepalive_timer = -1;
+    int ws_alive = 0;
     uint64_t bs_block_size = DEFAULT_BLOCK_SIZE;
     void add_etcd_url(std::string);
+    void pick_next_etcd();
 public:
-    std::vector<std::string> etcd_addresses;
     std::string etcd_prefix;
     int log_level = 0;
     timerfd_manager_t *tfd = NULL;
@@ -98,6 +106,7 @@ public:
     std::function<void(bool)> on_load_pgs_hook;
     std::function<void(pool_id_t, pg_num_t)> on_change_pg_history_hook;
     std::function<void(osd_num_t)> on_change_osd_state_hook;
+    std::function<void()> on_reload_hook;
 
     json11::Json::object serialize_inode_cfg(inode_config_t *cfg);
     etcd_kv_t parse_etcd_kv(const json11::Json & kv_json);
@@ -110,5 +119,6 @@ public:
     void parse_config(const json11::Json & config);
     inode_watch_t* watch_inode(std::string name);
     void close_watch(inode_watch_t* watch);
+    int address_count();
     ~etcd_state_client_t();
 };

src/fio_sec_osd.cpp

@@ -28,6 +28,7 @@
 #include <vector>
 #include <unordered_map>
 
+#include "addr_util.h"
 #include "rw_blocking.h"
 #include "osd_ops.h"
 #include "fio_headers.h"
@@ -152,17 +153,14 @@ static int sec_init(struct thread_data *td)
     bsd->block_order = o->block_order == 0 ? 17 : o->block_order;
     bsd->block_size = 1 << o->block_order;
 
-    struct sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, o->host ? o->host : "127.0.0.1", &addr.sin_addr)) != 1)
+    sockaddr addr;
+    if (!string_to_addr(std::string(o->host ? o->host : "127.0.0.1"), false, o->port > 0 ? o->port : 11203, &addr))
     {
-        fprintf(stderr, "server address: %s%s\n", o->host ? o->host : "127.0.0.1", r == 0 ? " is not valid" : ": no ipv4 support");
+        fprintf(stderr, "server address: %s is not valid\n", o->host ? o->host : "127.0.0.1");
         return 1;
     }
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(o->port ? o->port : 11203);
 
-    bsd->connect_fd = socket(AF_INET, SOCK_STREAM, 0);
+    bsd->connect_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (bsd->connect_fd < 0)
     {
         perror("socket");

src/http_client.cpp

@@ -15,13 +15,13 @@
 
 #include <stdexcept>
 
+#include "addr_util.h"
 #include "json11/json11.hpp"
 #include "http_client.h"
 #include "timerfd_manager.h"
 
 #define READ_BUFFER_SIZE 9000
 
-static int extract_port(std::string & host);
 static std::string trim(const std::string & in);
 static std::string ws_format_frame(int type, uint64_t size);
 static bool ws_parse_frame(std::string & buf, int & type, std::string & res);
@@ -185,19 +185,15 @@ http_co_t::~http_co_t()
 void http_co_t::start_connection()
 {
     stackin();
-    int port = extract_port(host);
-    struct sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, host.c_str(), &addr.sin_addr)) != 1)
+    struct sockaddr addr;
+    if (!string_to_addr(host.c_str(), 1, 80, &addr))
     {
         parsed.error_code = ENXIO;
         stackout();
         end();
         return;
     }
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(port ? port : 80);
-    peer_fd = socket(AF_INET, SOCK_STREAM, 0);
+    peer_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (peer_fd < 0)
     {
         parsed.error_code = errno;
@@ -219,7 +215,7 @@ void http_co_t::start_connection()
     }
     epoll_events = 0;
     // Finally call connect
-    r = ::connect(peer_fd, (sockaddr*)&addr, sizeof(addr));
+    int r = ::connect(peer_fd, (sockaddr*)&addr, sizeof(addr));
     if (r < 0 && errno != EINPROGRESS)
     {
         parsed.error_code = errno;
@@ -451,7 +447,11 @@ bool http_co_t::handle_read()
         }
         if (want_streaming && parsed.body.size() > 0)
         {
+            if (!ended)
+            {
+                // Don't deliver additional events after close()
                 callback(&parsed);
+            }
             parsed.body = "";
         }
     }
@@ -459,7 +459,11 @@ bool http_co_t::handle_read()
     {
         while (ws_parse_frame(response, parsed.ws_msg_type, parsed.body))
         {
+            if (!ended)
+            {
+                // Don't deliver additional events after close()
                 callback(&parsed);
+            }
             parsed.body = "";
         }
     }
@@ -621,8 +625,82 @@ static bool ws_parse_frame(std::string & buf, int & type, std::string & res)
     return true;
 }
 
-std::vector<std::string> getifaddr_list(bool include_v6)
+static bool cidr_match(const in_addr &addr, const in_addr &net, uint8_t bits)
 {
+    if (bits == 0)
+    {
+        // C99 6.5.7 (3): u32 << 32 is undefined behaviour
+        return true;
+    }
+    return !((addr.s_addr ^ net.s_addr) & htonl(0xFFFFFFFFu << (32 - bits)));
+}
+
+static bool cidr6_match(const in6_addr &address, const in6_addr &network, uint8_t bits)
+{
+    const uint32_t *a = address.s6_addr32;
+    const uint32_t *n = network.s6_addr32;
+    int bits_whole, bits_incomplete;
+    bits_whole = bits >> 5;         // number of whole u32
+    bits_incomplete = bits & 0x1F;  // number of bits in incomplete u32
+    if (bits_whole && memcmp(a, n, bits_whole << 2))
+        return false;
+    if (bits_incomplete)
+    {
+        uint32_t mask = htonl((0xFFFFFFFFu) << (32 - bits_incomplete));
+        if ((a[bits_whole] ^ n[bits_whole]) & mask)
+            return false;
+    }
+    return true;
+}
+
+struct addr_mask_t
+{
+    sa_family_t family;
+    in_addr ipv4;
+    in6_addr ipv6;
+    uint8_t bits;
+};
+
+std::vector<std::string> getifaddr_list(json11::Json mask_cfg, bool include_v6)
+{
+    std::vector<addr_mask_t> masks;
+    if (mask_cfg.is_string())
+    {
+        mask_cfg = json11::Json::array{ mask_cfg };
+    }
+    for (auto mask_json: mask_cfg.array_items())
+    {
+        std::string mask = mask_json.string_value();
+        unsigned bits = 0;
+        int p = mask.find('/');
+        if (p != std::string::npos)
+        {
+            char null_byte = 0;
+            if (sscanf(mask.c_str()+p+1, "%u%c", &bits, &null_byte) != 1 || bits > 128)
+            {
+                throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+            }
+            mask = mask.substr(0, p);
+        }
+        in_addr ipv4;
+        in6_addr ipv6;
+        if (inet_pton(AF_INET, mask.c_str(), &ipv4) == 1)
+        {
+            if (bits > 32)
+            {
+                throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+            }
+            masks.push_back((addr_mask_t){ .family = AF_INET, .ipv4 = ipv4, .bits = (uint8_t)bits });
+        }
+        else if (include_v6 && inet_pton(AF_INET6, mask.c_str(), &ipv6) == 1)
+        {
+            masks.push_back((addr_mask_t){ .family = AF_INET6, .ipv6 = ipv6, .bits = (uint8_t)bits });
+        }
+        else
+        {
+            throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+        }
+    }
     std::vector<std::string> addresses;
     ifaddrs *list, *ifa;
     if (getifaddrs(&list) == -1)
@@ -641,9 +719,30 @@ std::vector<std::string> getifaddr_list(bool include_v6)
         {
             void *addr_ptr;
             if (family == AF_INET)
+            {
                 addr_ptr = &((sockaddr_in *)ifa->ifa_addr)->sin_addr;
+            }
             else
+            {
                 addr_ptr = &((sockaddr_in6 *)ifa->ifa_addr)->sin6_addr;
+            }
+            if (masks.size() > 0)
+            {
+                int i;
+                for (i = 0; i < masks.size(); i++)
+                {
+                    if (masks[i].family == family && (family == AF_INET
+                        ? cidr_match(*(in_addr*)addr_ptr, masks[i].ipv4, masks[i].bits)
+                        : cidr6_match(*(in6_addr*)addr_ptr, masks[i].ipv6, masks[i].bits)))
+                    {
+                        break;
+                    }
+                }
+                if (i >= masks.size())
+                {
+                    continue;
+                }
+            }
             char addr[INET6_ADDRSTRLEN];
             if (!inet_ntop(family, addr_ptr, addr, INET6_ADDRSTRLEN))
             {
@@ -656,22 +755,6 @@ std::vector<std::string> getifaddr_list(bool include_v6)
     return addresses;
 }
 
-static int extract_port(std::string & host)
-{
-    int port = 0;
-    int pos = 0;
-    if ((pos = host.find(':')) >= 0)
-    {
-        port = strtoull(host.c_str() + pos + 1, NULL, 10);
-        if (port >= 0x10000)
-        {
-            port = 0;
-        }
-        host = host.substr(0, pos);
-    }
-    return port;
-}
-
 std::string strtolower(const std::string & in)
 {
     std::string s = in;

src/http_client.h

@@ -45,7 +45,7 @@ struct websocket_t
 
 void parse_http_headers(std::string & res, http_response_t *parsed);
 
-std::vector<std::string> getifaddr_list(bool include_v6 = false);
+std::vector<std::string> getifaddr_list(json11::Json mask_cfg = json11::Json(), bool include_v6 = true);
 
 uint64_t stoull_full(const std::string & str, int base = 10);
 

src/messenger.cpp

@@ -8,6 +8,7 @@
 #include <netinet/tcp.h>
 #include <stdexcept>
 
+#include "addr_util.h"
 #include "messenger.h"
 
 void osd_messenger_t::init()
@@ -220,23 +221,20 @@ void osd_messenger_t::try_connect_peer(uint64_t peer_osd)
 void osd_messenger_t::try_connect_peer_addr(osd_num_t peer_osd, const char *peer_host, int peer_port)
 {
     assert(peer_osd != this->osd_num);
-    struct sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, peer_host, &addr.sin_addr)) != 1)
+    struct sockaddr addr;
+    if (!string_to_addr(peer_host, 0, peer_port, &addr))
     {
         on_connect_peer(peer_osd, -EINVAL);
         return;
     }
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(peer_port ? peer_port : 11203);
-    int peer_fd = socket(AF_INET, SOCK_STREAM, 0);
+    int peer_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (peer_fd < 0)
     {
         on_connect_peer(peer_osd, -errno);
         return;
     }
     fcntl(peer_fd, F_SETFL, fcntl(peer_fd, F_GETFL, 0) | O_NONBLOCK);
-    r = connect(peer_fd, (sockaddr*)&addr, sizeof(addr));
+    int r = connect(peer_fd, (sockaddr*)&addr, sizeof(addr));
     if (r < 0 && errno != EINPROGRESS)
     {
         close(peer_fd);
@@ -485,21 +483,20 @@ void osd_messenger_t::check_peer_config(osd_client_t *cl)
 void osd_messenger_t::accept_connections(int listen_fd)
 {
     // Accept new connections
-    sockaddr_in addr;
+    sockaddr addr;
     socklen_t peer_addr_size = sizeof(addr);
     int peer_fd;
-    while ((peer_fd = accept(listen_fd, (sockaddr*)&addr, &peer_addr_size)) >= 0)
+    while ((peer_fd = accept(listen_fd, &addr, &peer_addr_size)) >= 0)
     {
         assert(peer_fd != 0);
-        char peer_str[256];
-        fprintf(stderr, "[OSD %lu] new client %d: connection from %s port %d\n", this->osd_num, peer_fd,
-            inet_ntop(AF_INET, &addr.sin_addr, peer_str, 256), ntohs(addr.sin_port));
+        fprintf(stderr, "[OSD %lu] new client %d: connection from %s\n", this->osd_num, peer_fd,
+            addr_to_string(addr).c_str());
         fcntl(peer_fd, F_SETFL, fcntl(peer_fd, F_GETFL, 0) | O_NONBLOCK);
         int one = 1;
         setsockopt(peer_fd, SOL_TCP, TCP_NODELAY, &one, sizeof(one));
         clients[peer_fd] = new osd_client_t();
         clients[peer_fd]->peer_addr = addr;
-        clients[peer_fd]->peer_port = ntohs(addr.sin_port);
+        clients[peer_fd]->peer_port = ntohs(((sockaddr_in*)&addr)->sin_port);
         clients[peer_fd]->peer_fd = peer_fd;
         clients[peer_fd]->peer_state = PEER_CONNECTED;
         clients[peer_fd]->in_buf = malloc_or_die(receive_buffer_size);

src/messenger.h

@@ -49,7 +49,7 @@ struct osd_client_t
 {
     int refs = 0;
 
-    sockaddr_in peer_addr;
+    sockaddr peer_addr;
     int peer_port;
     int peer_fd;
     int peer_state;

src/mmap_manager.cpp

@@ -1,82 +0,0 @@
-#include <stdexcept>
-#include <cassert>
-#include <sys/mman.h>
-#include "mmap_manager.h"
-
-mmap_manager_t::mmap_manager_t(uint64_t mmap_size)
-{
-    this->mmap_size = mmap_size;
-}
-
-mmap_manager_t::~mmap_manager_t()
-{
-    for (auto & kv: past_buffers)
-    {
-        munmap(kv.second.addr, kv.second.size);
-    }
-    if (active_buffer.addr != NULL)
-    {
-        munmap(active_buffer.addr, active_buffer.size);
-    }
-}
-
-void *mmap_manager_t::alloc(uint64_t size)
-{
-    if (!active_buffer.addr || (active_buffer.pos + size) > active_buffer.size)
-    {
-        if (active_buffer.addr)
-        {
-            if (active_buffer.freed >= active_buffer.pos)
-                munmap(active_buffer.addr, active_buffer.size);
-            else
-                past_buffers[active_buffer.addr] = active_buffer;
-            active_buffer = { 0 };
-        }
-        uint64_t new_size = size < mmap_size ? mmap_size : size;
-        void *buf = mmap(NULL, new_size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
-        if (!buf)
-            throw std::runtime_error(std::string("can't mmap "+std::to_string(new_size)+" bytes"));
-        active_buffer = {
-            .addr = buf,
-            .size = new_size,
-            .freed = 0,
-            .pos = 0,
-        };
-    }
-    void *res = active_buffer.addr + active_buffer.pos;
-    active_buffer.pos += size;
-    return res;
-}
-
-void mmap_manager_t::free(void *addr, uint64_t size)
-{
-    auto it = past_buffers.upper_bound(addr);
-    if (it != past_buffers.begin())
-    {
-        if (it == past_buffers.end())
-        {
-            it--;
-            if (addr < it->second.addr || addr >= it->second.addr+it->second.size)
-                it = past_buffers.end();
-        }
-        else
-            it--;
-    }
-    else
-        it = past_buffers.end();
-    if (it != past_buffers.end())
-    {
-        assert(addr >= it->second.addr && addr+size <= it->second.addr+it->second.size);
-        it->second.freed += size;
-        if (it->second.freed >= it->second.pos)
-        {
-            munmap(it->second.addr, it->second.size);
-            past_buffers.erase(it);
-        }
-    }
-    else
-    {
-        assert(addr < active_buffer.addr+active_buffer.size);
-        active_buffer.freed += size;
-    }
-}

src/mmap_manager.h

@@ -1,26 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-#include <map>
-
-struct mmap_buffer_t
-{
-    void *addr = NULL;
-    uint64_t size = 0;
-    uint64_t freed = 0;
-    uint64_t pos = 0;
-};
-
-class mmap_manager_t
-{
-protected:
-    uint64_t mmap_size = 32*1024*1024;
-    std::map<void*, mmap_buffer_t> past_buffers;
-    mmap_buffer_t active_buffer;
-
-public:
-    mmap_manager_t(uint64_t mmap_size = 32*1024*1024);
-    ~mmap_manager_t();
-    void *alloc(uint64_t size);
-    void free(void *addr, uint64_t size);
-};

src/msgr_rdma.cpp

@@ -62,6 +62,12 @@ msgr_rdma_context_t *msgr_rdma_context_t::create(const char *ib_devname, uint8_t
     dev_list = ibv_get_device_list(NULL);
     if (!dev_list)
     {
+        if (errno == -ENOSYS || errno == ENOSYS)
+        {
+            if (log_level > 0)
+                fprintf(stderr, "No RDMA devices found (RDMA device list returned ENOSYS)\n");
+        }
+        else
             fprintf(stderr, "Failed to get RDMA device list: %s\n", strerror(errno));
         goto cleanup;
     }

src/nbd_proxy.cpp

@@ -17,8 +17,6 @@
 
 #include "epoll_manager.h"
 #include "cluster_client.h"
-#include "mmap_manager.h"
-#include <stdexcept>
 
 #ifndef MSG_ZEROCOPY
 #define MSG_ZEROCOPY 0
@@ -26,24 +24,6 @@
 
 const char *exe_name = NULL;
 
-static inline void my_uring_prep_splice(struct io_uring_sqe *sqe,
-					int fd_in, int64_t off_in,
-					int fd_out, int64_t off_out,
-					unsigned int nbytes,
-					unsigned int splice_flags)
-{
-	my_uring_prep_rw(IORING_OP_SPLICE, sqe, fd_out, NULL, nbytes, (__u64) off_out);
-	sqe->splice_off_in = (__u64) off_in;
-	sqe->splice_fd_in = fd_in;
-	sqe->splice_flags = splice_flags;
-}
-
-struct buf_to_free_t
-{
-    void *buf = NULL;
-    uint64_t unmap = 0;
-};
-
 class nbd_proxy
 {
 protected:
@@ -58,7 +38,7 @@ protected:
     ring_consumer_t consumer;
 
     std::vector<iovec> send_list, next_send_list;
-    std::vector<buf_to_free_t> to_free;
+    std::vector<void*> to_free;
     int nbd_fd = -1;
     void *recv_buf = NULL;
     int receive_buffer_size = 9000;
@@ -71,10 +51,6 @@ protected:
     msghdr read_msg = { 0 }, send_msg = { 0 };
     iovec read_iov = { 0 };
 
-    mmap_manager_t mm;
-    int pipe_fd[2];
-    int vmspliced = 0;
-
 public:
     static json11::Json::object parse_args(int narg, const char *args[])
     {
@@ -198,12 +174,6 @@ public:
                 exit(1);
             }
         }
-        // Create pipe for splicing
-        if (pipe(pipe_fd) < 0)
-        {
-            fprintf(stderr, "pipe failed: %s\n", strerror(errno));
-            exit(1);
-        }
         // Create client
         ringloop = new ring_loop_t(512);
         epmgr = new epoll_manager_t(ringloop);
@@ -552,76 +522,16 @@ protected:
         {
             return;
         }
-        int i;
-        //uint64_t len = 0;
-        for (i = 0; i < send_list.size(); i++)
-        {
-            if (to_free[i].unmap)
-            {
-                break;
-            }
-            //len += send_list[i].iov_len;
-        }
-        //if (true)
-        if (i > 0)
-        {
-            /*io_uring_sqe* sqe = ringloop->get_sqe();
-            if (!sqe)
-            {
-                return;
-            }
-            ring_data_t* data = ((ring_data_t*)sqe->user_data);
-            data->callback = [this](ring_data_t *data) { handle_send(data->res); };*/
-            send_msg.msg_iov = send_list.data();
-            //send_msg.msg_iovlen = send_list.size();
-            send_msg.msg_iovlen = i;
-            //my_uring_prep_sendmsg(sqe, nbd_fd, &send_msg, MSG_ZEROCOPY);
-            int res = sendmsg(nbd_fd, &send_msg, MSG_ZEROCOPY);
-            if (res < 0)
-                res = -errno;
-            handle_send(res);
-            //int r = sendmsg(int sockfd, const struct msghdr *msg, int flags);
-        }
-        else
-        {
         io_uring_sqe* sqe = ringloop->get_sqe();
         if (!sqe)
         {
             return;
         }
-            if (vmspliced <= 0)
-            {
-                vmspliced = vmsplice(pipe_fd[1], send_list.data(), 1, SPLICE_F_GIFT);
-                if (vmspliced < 0)
-                {
-                    throw std::runtime_error(std::string("vmsplice: ")+strerror(errno));
-                }
-            }
-            send_msg.msg_iovlen = 1;
         ring_data_t* data = ((ring_data_t*)sqe->user_data);
-            data->callback = [this](ring_data_t *data)
-            {
-                if (data->res > 0)
-                    vmspliced -= data->res;
-                handle_send(data->res);
-            };
-            my_uring_prep_splice(sqe, pipe_fd[0], -1l, nbd_fd, -1l, vmspliced, SPLICE_F_MOVE);
-            /*int sent = res, spl = res;
-            while (spl > 0)
-            {
-                res = splice(pipe_fd[0], NULL, nbd_fd, NULL, spl, SPLICE_F_MOVE);
-                if (res < 0)
-                {
-                    if (errno != EAGAIN)
-                        throw std::runtime_error(std::string("splice: ")+strerror(errno));
-                }
-                else
-                {
-                    spl -= res;
-                }
-            }
-            handle_send(sent);*/
-        }
+        data->callback = [this](ring_data_t *data) { handle_send(data->res); };
+        send_msg.msg_iov = send_list.data();
+        send_msg.msg_iovlen = send_list.size();
+        my_uring_prep_sendmsg(sqe, nbd_fd, &send_msg, MSG_ZEROCOPY);
     }
 
     void handle_send(int result)
@@ -637,10 +547,7 @@ protected:
         {
             if (result >= send_list[to_eat].iov_len)
             {
-                if (to_free[to_eat].unmap)
-                    mm.free(to_free[to_eat].buf, to_free[to_eat].unmap);
-                else
-                    free(to_free[to_eat].buf);
+                free(to_free[to_eat]);
                 result -= send_list[to_eat].iov_len;
                 to_eat++;
             }
@@ -752,7 +659,6 @@ protected:
             printf("request %lx +%x %lx\n", be64toh(cur_req.from), be32toh(cur_req.len), handle);
 #endif
             void *buf = NULL;
-            nbd_reply *reply = NULL;
             cluster_op_t *op = new cluster_op_t;
             if (req_type == NBD_CMD_READ || req_type == NBD_CMD_WRITE)
             {
@@ -760,51 +666,36 @@ protected:
                 op->inode = inode ? inode : watch->cfg.num;
                 op->offset = be64toh(cur_req.from);
                 op->len = be32toh(cur_req.len);
-                if (req_type == NBD_CMD_WRITE)
-                {
                 buf = malloc_or_die(sizeof(nbd_reply) + op->len);
-                    reply = (nbd_reply*)buf;
                 op->iov.push_back(buf + sizeof(nbd_reply), op->len);
             }
-                else
-                {
-                    buf = mm.alloc(op->len);
-                    reply = (nbd_reply*)malloc_or_die(sizeof(nbd_reply));
-                    op->iov.push_back(buf, op->len);
-                }
-            }
             else if (req_type == NBD_CMD_FLUSH)
             {
                 op->opcode = OSD_OP_SYNC;
-                reply = (nbd_reply*)malloc_or_die(sizeof(nbd_reply));
+                buf = malloc_or_die(sizeof(nbd_reply));
             }
-            op->callback = [this, buf, reply, handle](cluster_op_t *op)
+            op->callback = [this, buf, handle](cluster_op_t *op)
             {
 #ifdef DEBUG
                 printf("reply %lx e=%d\n", handle, op->retval);
 #endif
+                nbd_reply *reply = (nbd_reply*)buf;
                 reply->magic = htobe32(NBD_REPLY_MAGIC);
                 memcpy(reply->handle, &handle, 8);
                 reply->error = htobe32(op->retval < 0 ? -op->retval : 0);
                 auto & to_list = send_msg.msg_iovlen > 0 ? next_send_list : send_list;
-                to_list.push_back((iovec){ .iov_base = reply, .iov_len = sizeof(nbd_reply) });
-                to_free.push_back((buf_to_free_t){ .buf = reply, .unmap = 0 });
-                if (op->retval >= 0 && op->opcode == OSD_OP_READ)
-                {
-                    to_list.push_back((iovec){ .iov_base = buf, .iov_len = op->len });
-                    to_free.push_back((buf_to_free_t){ .buf = buf, .unmap = op->len });
-                }
-                else if (op->opcode == OSD_OP_READ)
-                {
-                    mm.free(buf, op->len);
-                }
+                if (op->retval < 0 || op->opcode != OSD_OP_READ)
+                    to_list.push_back({ .iov_base = buf, .iov_len = sizeof(nbd_reply) });
+                else
+                    to_list.push_back({ .iov_base = buf, .iov_len = sizeof(nbd_reply) + op->len });
+                to_free.push_back(buf);
                 delete op;
                 ringloop->wakeup();
             };
             if (req_type == NBD_CMD_WRITE)
             {
                 cur_op = op;
-                cur_buf = buf;
+                cur_buf = buf + sizeof(nbd_reply);
                 cur_left = op->len;
                 read_state = CL_READ_DATA;
             }

src/osd.cpp

@@ -7,6 +7,7 @@
 #include <netinet/tcp.h>
 #include <arpa/inet.h>
 
+#include "addr_util.h"
 #include "blockstore_impl.h"
 #include "osd_primary.h"
 #include "osd.h"
@@ -156,7 +157,41 @@ void osd_t::parse_config(const json11::Json & config)
 
 void osd_t::bind_socket()
 {
-    listen_fd = socket(AF_INET, SOCK_STREAM, 0);
+    if (config["osd_network"].is_string() ||
+        config["osd_network"].is_array())
+    {
+        std::vector<std::string> mask;
+        if (config["osd_network"].is_string())
+            mask.push_back(config["osd_network"].string_value());
+        else
+            for (auto v: config["osd_network"].array_items())
+                mask.push_back(v.string_value());
+        auto matched_addrs = getifaddr_list(mask);
+        if (matched_addrs.size() > 1)
+        {
+            fprintf(stderr, "More than 1 address matches requested network(s): %s\n", json11::Json(matched_addrs).dump().c_str());
+            force_stop(1);
+        }
+        if (!matched_addrs.size())
+        {
+            std::string nets;
+            for (auto v: mask)
+                nets += (nets == "" ? v : ","+v);
+            fprintf(stderr, "Addresses matching osd_network(s) %s not found\n", nets.c_str());
+            force_stop(1);
+        }
+        bind_address = matched_addrs[0];
+    }
+
+    // FIXME Support multiple listening sockets
+
+    sockaddr addr;
+    if (!string_to_addr(bind_address, 0, bind_port, &addr))
+    {
+        throw std::runtime_error("bind address "+bind_address+" is not valid");
+    }
+
+    listen_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (listen_fd < 0)
     {
         throw std::runtime_error(std::string("socket: ") + strerror(errno));
@@ -164,17 +199,7 @@ void osd_t::bind_socket()
     int enable = 1;
     setsockopt(listen_fd, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(enable));
 
-    sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, bind_address.c_str(), &addr.sin_addr)) != 1)
-    {
-        close(listen_fd);
-        throw std::runtime_error("bind address "+bind_address+(r == 0 ? " is not valid" : ": no ipv4 support"));
-    }
-    addr.sin_family = AF_INET;
-
-    addr.sin_port = htons(bind_port);
-    if (bind(listen_fd, (sockaddr*)&addr, sizeof(addr)) < 0)
+    if (bind(listen_fd, &addr, sizeof(addr)) < 0)
     {
         close(listen_fd);
         throw std::runtime_error(std::string("bind: ") + strerror(errno));
@@ -187,7 +212,7 @@ void osd_t::bind_socket()
             close(listen_fd);
             throw std::runtime_error(std::string("getsockname: ") + strerror(errno));
         }
-        listening_port = ntohs(addr.sin_port);
+        listening_port = ntohs(((sockaddr_in*)&addr)->sin_port);
     }
     else
     {

src/osd_cluster.cpp

@@ -15,7 +15,7 @@
 //   Peer connection is lost -> Reload connection data -> Try to reconnect
 void osd_t::init_cluster()
 {
-    if (!st_cli.etcd_addresses.size())
+    if (!st_cli.address_count())
     {
         if (run_primary)
         {
@@ -711,7 +711,7 @@ struct reporting_pg_t
 
 void osd_t::report_pg_states()
 {
-    if (etcd_reporting_pg_state || !this->pg_state_dirty.size() || !st_cli.etcd_addresses.size())
+    if (etcd_reporting_pg_state || !this->pg_state_dirty.size() || !st_cli.address_count())
     {
         return;
     }
@@ -845,10 +845,10 @@ void osd_t::report_pg_states()
             }
             for (auto & res: data["responses"].array_items())
             {
-                if (res["kvs"].array_items().size())
+                if (res["response_range"]["kvs"].array_items().size())
                 {
-                    auto kv = st_cli.parse_etcd_kv(res["kvs"][0]);
-                    if (kv.key.substr(st_cli.etcd_prefix.length()+10) == st_cli.etcd_prefix+"/pg/state/")
+                    auto kv = st_cli.parse_etcd_kv(res["response_range"]["kvs"][0]);
+                    if (kv.key.substr(0, st_cli.etcd_prefix.length()+10) == st_cli.etcd_prefix+"/pg/state/")
                     {
                         pool_id_t pool_id = 0;
                         pg_num_t pg_num = 0;

src/osd_peering.cpp

@@ -194,6 +194,24 @@ void osd_t::start_pg_peering(pg_t & pg)
             });
         }
     }
+    if (pg.pg_cursize < pg.pg_minsize)
+    {
+        pg.state = PG_INCOMPLETE;
+        report_pg_state(pg);
+        return;
+    }
+    std::set<osd_num_t> cur_peers;
+    for (auto pg_osd: pg.all_peers)
+    {
+        if (pg_osd == this->osd_num || msgr.osd_peer_fds.find(pg_osd) != msgr.osd_peer_fds.end())
+        {
+            cur_peers.insert(pg_osd);
+        }
+        else if (msgr.wanted_peers.find(pg_osd) == msgr.wanted_peers.end())
+        {
+            msgr.connect_peer(pg_osd, st_cli.peer_states[pg_osd]);
+        }
+    }
     if (pg.target_history.size())
     {
         // Refuse to start PG if no peers are available from any of the historical OSD sets
@@ -222,24 +240,6 @@ void osd_t::start_pg_peering(pg_t & pg)
             }
         }
     }
-    if (pg.pg_cursize < pg.pg_minsize)
-    {
-        pg.state = PG_INCOMPLETE;
-        report_pg_state(pg);
-        return;
-    }
-    std::set<osd_num_t> cur_peers;
-    for (auto pg_osd: pg.all_peers)
-    {
-        if (pg_osd == this->osd_num || msgr.osd_peer_fds.find(pg_osd) != msgr.osd_peer_fds.end())
-        {
-            cur_peers.insert(pg_osd);
-        }
-        else if (msgr.wanted_peers.find(pg_osd) == msgr.wanted_peers.end())
-        {
-            msgr.connect_peer(pg_osd, st_cli.peer_states[pg_osd]);
-        }
-    }
     pg.cur_peers.insert(pg.cur_peers.begin(), cur_peers.begin(), cur_peers.end());
     if (pg.peering_state)
     {

src/osd_test.cpp

@@ -16,6 +16,7 @@
 
 #include <stdexcept>
 
+#include "addr_util.h"
 #include "osd_ops.h"
 #include "rw_blocking.h"
 #include "test_pattern.h"
@@ -133,17 +134,14 @@ int main(int narg, char *args[])
 
 int connect_osd(const char *osd_address, int osd_port)
 {
-    struct sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, osd_address, &addr.sin_addr)) != 1)
+    struct sockaddr addr;
+    if (!string_to_addr(osd_address, 0, osd_port, &addr))
     {
-        fprintf(stderr, "server address: %s%s\n", osd_address, r == 0 ? " is not valid" : ": no ipv4 support");
+        fprintf(stderr, "server address: %s is not valid\n", osd_address);
         return -1;
     }
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(osd_port);
 
-    int connect_fd = socket(AF_INET, SOCK_STREAM, 0);
+    int connect_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (connect_fd < 0)
     {
         perror("socket");

src/qemu_driver.c

@@ -3,9 +3,12 @@
 
 // QEMU block driver
 
+#ifdef VITASTOR_SOURCE_TREE
 #define BUILD_DSO
 #define _GNU_SOURCE
+#endif
 #include "qemu/osdep.h"
+#include "qemu/main-loop.h"
 #include "block/block_int.h"
 #include "qapi/error.h"
 #include "qapi/qmp/qdict.h"
@@ -32,6 +35,7 @@
 
 #include "vitastor_c.h"
 
+#ifdef VITASTOR_SOURCE_TREE
 void qemu_module_dummy(void)
 {
 }
@@ -39,6 +43,7 @@ void qemu_module_dummy(void)
 void DSO_STAMP_FUN(void)
 {
 }
+#endif
 
 typedef struct VitastorClient
 {
@@ -125,6 +130,7 @@ static void vitastor_parse_filename(const char *filename, QDict *options, Error
     // The following are all key/value pairs
     while (p)
     {
+        int i;
         char *name, *value;
         name = qemu_vitastor_next_tok(p, '=', &p);
         if (!p)
@@ -132,7 +138,7 @@ static void vitastor_parse_filename(const char *filename, QDict *options, Error
             error_setg(errp, "conf option %s has no value", name);
             break;
         }
-        for (int i = 0; i < strlen(name); i++)
+        for (i = 0; i < strlen(name); i++)
             if (name[i] == '_')
                 name[i] = '-';
         qemu_vitastor_unescape(name);
@@ -242,22 +248,23 @@ static int vitastor_file_open(BlockDriverState *bs, QDict *options, int flags, E
         {
             error_setg(errp, "image does not exist");
             vitastor_close(bs);
+            return -1;
         }
         if (!client->size)
         {
-            client->size = qdict_get_int(options, "size");
+            client->size = qdict_get_try_int(options, "size", 0);
         }
     }
     else
     {
         client->watch = NULL;
-        client->inode = qdict_get_int(options, "inode");
-        client->pool = qdict_get_int(options, "pool");
+        client->inode = qdict_get_try_int(options, "inode", 0);
+        client->pool = qdict_get_try_int(options, "pool", 0);
         if (client->pool)
         {
             client->inode = (client->inode & ((1l << (64-POOL_ID_BITS)) - 1)) | (client->pool << (64-POOL_ID_BITS));
         }
-        client->size = qdict_get_int(options, "size");
+        client->size = qdict_get_try_int(options, "size", 0);
     }
     if (!client->size)
     {
@@ -301,12 +308,12 @@ static void vitastor_close(BlockDriverState *bs)
 static int vitastor_probe_blocksizes(BlockDriverState *bs, BlockSizes *bsz)
 {
     bsz->phys = 4096;
-    bsz->log = 4096;
+    bsz->log = 512;
     return 0;
 }
 #endif
 
-#if QEMU_VERSION_MAJOR >= 3
+#if QEMU_VERSION_MAJOR >= 3 || QEMU_VERSION_MAJOR == 2 && QEMU_VERSION_MINOR >= 12
 static int coroutine_fn vitastor_co_create_opts(
 #if QEMU_VERSION_MAJOR >= 4
     BlockDriver *drv,
@@ -339,7 +346,7 @@ static int coroutine_fn vitastor_co_truncate(BlockDriverState *bs, int64_t offse
     bool exact,
 #endif
     PreallocMode prealloc,
-#if QEMU_VERSION_MAJOR >= 5 && QEMU_VERSION_MINOR >= 1 || QEMU_VERSION_MAJOR > 5
+#if QEMU_VERSION_MAJOR >= 5 && QEMU_VERSION_MINOR >= 1 || QEMU_VERSION_MAJOR > 5 || defined RHEL_BDRV_CO_TRUNCATE_FLAGS
     BdrvRequestFlags flags,
 #endif
     Error **errp)
@@ -387,10 +394,10 @@ static int vitastor_refresh_limits(BlockDriverState *bs)
 #endif
 }
 
-static int64_t vitastor_get_allocated_file_size(BlockDriverState *bs)
-{
-    return 0;
-}
+//static int64_t vitastor_get_allocated_file_size(BlockDriverState *bs)
+//{
+//    return 0;
+//}
 
 static void vitastor_co_init_task(BlockDriverState *bs, VitastorRPC *task)
 {
@@ -461,7 +468,7 @@ static int coroutine_fn vitastor_co_pwritev(BlockDriverState *bs, uint64_t offse
     return task.ret;
 }
 
-#if QEMU_VERSION_MAJOR < 3
+#if !( QEMU_VERSION_MAJOR >= 3 || QEMU_VERSION_MAJOR == 2 && QEMU_VERSION_MINOR >= 7 )
 static int coroutine_fn vitastor_co_readv(BlockDriverState *bs, int64_t sector_num, int nb_sectors, QEMUIOVector *iov)
 {
     return vitastor_co_preadv(bs, sector_num*BDRV_SECTOR_SIZE, nb_sectors*BDRV_SECTOR_SIZE, iov, 0);
@@ -515,6 +522,7 @@ static QEMUOptionParameter vitastor_create_opts[] = {
 };
 #endif
 
+#if QEMU_VERSION_MAJOR >= 4
 static const char *vitastor_strong_runtime_opts[] = {
     "inode",
     "pool",
@@ -524,6 +532,7 @@ static const char *vitastor_strong_runtime_opts[] = {
 
     NULL
 };
+#endif
 
 static BlockDriver bdrv_vitastor = {
     .format_name                    = "vitastor",
@@ -557,12 +566,16 @@ static BlockDriver bdrv_vitastor = {
     // Requires patching QAPI IDL, thus unimplemented
     //.bdrv_co_create                 = vitastor_co_create,
 
-#if QEMU_VERSION_MAJOR >= 3
+#if QEMU_VERSION_MAJOR >= 3 || QEMU_VERSION_MAJOR == 2 && QEMU_VERSION_MINOR >= 12
     // For bdrv_create(), used by qemu-img
     .bdrv_co_create_opts            = vitastor_co_create_opts,
+#endif
 
+#if QEMU_VERSION_MAJOR >= 3
     .bdrv_co_truncate               = vitastor_co_truncate,
+#endif
 
+#if QEMU_VERSION_MAJOR >= 3 || QEMU_VERSION_MAJOR == 2 && QEMU_VERSION_MINOR >= 7
     .bdrv_co_preadv                 = vitastor_co_preadv,
     .bdrv_co_pwritev                = vitastor_co_pwritev,
 #else

src/rw_blocking.cpp

@@ -60,7 +60,7 @@ int readv_blocking(int fd, iovec *iov, int iovcnt)
     int done = 0;
     while (v < iovcnt)
     {
-        ssize_t r = readv(fd, iov, iovcnt);
+        ssize_t r = readv(fd, iov+v, iovcnt-v);
         if (r < 0)
         {
             if (errno != EAGAIN && errno != EPIPE)
@@ -70,6 +70,7 @@ int readv_blocking(int fd, iovec *iov, int iovcnt)
             }
             continue;
         }
+        done += r;
         while (v < iovcnt)
         {
             if (iov[v].iov_len > r)
@@ -80,10 +81,10 @@ int readv_blocking(int fd, iovec *iov, int iovcnt)
             }
             else
             {
+                r -= iov[v].iov_len;
                 v++;
             }
         }
-        done += r;
     }
     return done;
 }
@@ -94,7 +95,7 @@ int writev_blocking(int fd, iovec *iov, int iovcnt)
     int done = 0;
     while (v < iovcnt)
     {
-        ssize_t r = writev(fd, iov, iovcnt);
+        ssize_t r = writev(fd, iov+v, iovcnt-v);
         if (r < 0)
         {
             if (errno != EAGAIN && errno != EPIPE)
@@ -104,6 +105,7 @@ int writev_blocking(int fd, iovec *iov, int iovcnt)
             }
             continue;
         }
+        done += r;
         while (v < iovcnt)
         {
             if (iov[v].iov_len > r)
@@ -114,10 +116,10 @@ int writev_blocking(int fd, iovec *iov, int iovcnt)
             }
             else
             {
+                r -= iov[v].iov_len;
                 v++;
             }
         }
-        done += r;
     }
     return done;
 }

src/stub_bench.cpp

@@ -21,6 +21,7 @@
 
 #include <stdexcept>
 
+#include "addr_util.h"
 #include "rw_blocking.h"
 #include "osd_ops.h"
 
@@ -66,16 +67,14 @@ int main(int narg, char *args[])
 
 int connect_stub(const char *server_address, int server_port)
 {
-    struct sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, server_address, &addr.sin_addr)) != 1)
+    struct sockaddr addr;
+    if (!string_to_addr(server_address, 0, server_port, &addr))
     {
-        fprintf(stderr, "server address: %s%s\n", server_address, r == 0 ? " is not valid" : ": no ipv4 support");
+        fprintf(stderr, "server address: %s is not valid\n", server_address);
         return -1;
     }
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(server_port);
-    int connect_fd = socket(AF_INET, SOCK_STREAM, 0);
+
+    int connect_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (connect_fd < 0)
     {
         perror("socket");

src/stub_osd.cpp

@@ -37,11 +37,11 @@
 
 #include <stdexcept>
 
-#include "mmap_manager.h"
+#include "addr_util.h"
 #include "rw_blocking.h"
 #include "osd_ops.h"
 
-int bind_stub(const char *bind_address, int bind_port);
+int bind_stub(std::string bind_address, int bind_port);
 
 void run_stub(int peer_fd);
 
@@ -49,13 +49,13 @@ int main(int narg, char *args[])
 {
     int listen_fd = bind_stub("0.0.0.0", 11203);
     // Accept new connections
-    sockaddr_in addr;
+    sockaddr addr;
     socklen_t peer_addr_size = sizeof(addr);
     int peer_fd;
     while (1)
     {
         printf("stub_osd: waiting for 1 client\n");
-        peer_fd = accept(listen_fd, (sockaddr*)&addr, &peer_addr_size);
+        peer_fd = accept(listen_fd, &addr, &peer_addr_size);
         if (peer_fd == -1)
         {
             if (errno == EAGAIN)
@@ -63,9 +63,8 @@ int main(int narg, char *args[])
             else
                 throw std::runtime_error(std::string("accept: ") + strerror(errno));
         }
-        char peer_str[256];
-        printf("stub_osd: new client %d: connection from %s port %d\n", peer_fd,
-            inet_ntop(AF_INET, &addr.sin_addr, peer_str, 256), ntohs(addr.sin_port));
+        printf("stub_osd: new client %d: connection from %s\n", peer_fd,
+            addr_to_string(addr).c_str());
         int one = 1;
         setsockopt(peer_fd, SOL_TCP, TCP_NODELAY, &one, sizeof(one));
         run_stub(peer_fd);
@@ -77,11 +76,17 @@ int main(int narg, char *args[])
     return 0;
 }
 
-int bind_stub(const char *bind_address, int bind_port)
+int bind_stub(std::string bind_address, int bind_port)
 {
     int listen_backlog = 128;
 
-    int listen_fd = socket(AF_INET, SOCK_STREAM, 0);
+    sockaddr addr;
+    if (!string_to_addr(bind_address, 0, bind_port, &addr))
+    {
+        throw std::runtime_error("bind address "+bind_address+" is not valid");
+    }
+
+    int listen_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (listen_fd < 0)
     {
         throw std::runtime_error(std::string("socket: ") + strerror(errno));
@@ -89,17 +94,7 @@ int bind_stub(const char *bind_address, int bind_port)
     int enable = 1;
     setsockopt(listen_fd, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(enable));
 
-    sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, bind_address, &addr.sin_addr)) != 1)
-    {
-        close(listen_fd);
-        throw std::runtime_error("bind address "+std::string(bind_address)+(r == 0 ? " is not valid" : ": no ipv4 support"));
-    }
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(bind_port);
-
-    if (bind(listen_fd, (sockaddr*)&addr, sizeof(addr)) < 0)
+    if (bind(listen_fd, &addr, sizeof(addr)) < 0)
     {
         close(listen_fd);
         throw std::runtime_error(std::string("bind: ") + strerror(errno));
@@ -116,14 +111,8 @@ int bind_stub(const char *bind_address, int bind_port)
 
 void run_stub(int peer_fd)
 {
-    mmap_manager_t mm;
-    int pipe_fd[2];
-    if (pipe(pipe_fd) < 0)
-    {
-        throw std::runtime_error(std::string("pipe: ") + strerror(errno));
-    }
     osd_any_op_t op;
-    osd_any_reply_t reply;
+    osd_any_reply_t reply = { 0 };
     void *buf = NULL;
     while (1)
     {
@@ -143,39 +132,11 @@ void run_stub(int peer_fd)
         if (op.hdr.opcode == OSD_OP_SEC_READ)
         {
             reply.hdr.retval = op.sec_rw.len;
-            //buf = malloc(op.sec_rw.len);
-            buf = mm.alloc(op.sec_rw.len);
+            buf = malloc(op.sec_rw.len);
             r = write_blocking(peer_fd, reply.buf, OSD_PACKET_SIZE);
             if (r == OSD_PACKET_SIZE)
-            {
-                size_t offset = 0;
-                while (offset < op.sec_rw.len)
-                {
-                    iovec iov = { .iov_base = buf+offset, .iov_len = op.sec_rw.len-offset };
-                    int vmspliced = vmsplice(pipe_fd[1], &iov, 1, SPLICE_F_GIFT);
-                    if (vmspliced < 0)
-                    {
-                        throw std::runtime_error(std::string("vmsplice: ")+strerror(errno));
-                    }
-                    int spliced = 0;
-                    while (spliced < vmspliced)
-                    {
-                        int r2 = splice(pipe_fd[0], NULL, peer_fd, NULL, vmspliced-spliced, SPLICE_F_MOVE);
-                        if (r2 < 0)
-                        {
-                            if (errno != EAGAIN)
-                                throw std::runtime_error(std::string("splice: ")+strerror(errno));
-                        }
-                        else
-                            spliced += r2;
-                    }
-                    offset += vmspliced;
-                }
-                r = offset;
-                //r = write_blocking(peer_fd, &buf, op.sec_rw.len);
-            }
-            mm.free(buf, op.sec_rw.len);
-            buf = NULL;
+                r = write_blocking(peer_fd, buf, op.sec_rw.len);
+            free(buf);
             if (r < op.sec_rw.len)
                 break;
         }
@@ -205,6 +166,5 @@ void run_stub(int peer_fd)
             break;
         }
     }
-    close(pipe_fd[0]);
-    close(pipe_fd[1]);
+    free(buf);
 }

src/stub_uring_osd.cpp

@@ -20,11 +20,12 @@
 
 #include <stdexcept>
 
+#include "addr_util.h"
 #include "ringloop.h"
 #include "epoll_manager.h"
 #include "messenger.h"
 
-int bind_stub(const char *bind_address, int bind_port);
+int bind_stub(std::string bind_address, int bind_port);
 
 void stub_exec_op(osd_messenger_t *msgr, osd_op_t *op);
 
@@ -39,6 +40,8 @@ int main(int narg, char *args[])
     msgr->ringloop = ringloop;
     msgr->repeer_pgs = [](osd_num_t) {};
     msgr->exec_op = [msgr](osd_op_t *op) { stub_exec_op(msgr, op); };
+    json11::Json config = json11::Json::object { { "log_level", 1 } };
+    msgr->parse_config(config);
     // Accept new connections
     int listen_fd = bind_stub("0.0.0.0", 11203);
     epmgr->set_fd_handler(listen_fd, false, [listen_fd, msgr](int fd, int events)
@@ -64,11 +67,17 @@ int main(int narg, char *args[])
     return 0;
 }
 
-int bind_stub(const char *bind_address, int bind_port)
+int bind_stub(std::string bind_address, int bind_port)
 {
     int listen_backlog = 128;
 
-    int listen_fd = socket(AF_INET, SOCK_STREAM, 0);
+    sockaddr addr;
+    if (!string_to_addr(bind_address, 0, bind_port, &addr))
+    {
+        throw std::runtime_error("bind address "+bind_address+" is not valid");
+    }
+
+    int listen_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (listen_fd < 0)
     {
         throw std::runtime_error(std::string("socket: ") + strerror(errno));
@@ -76,17 +85,7 @@ int bind_stub(const char *bind_address, int bind_port)
     int enable = 1;
     setsockopt(listen_fd, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(enable));
 
-    sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, bind_address, &addr.sin_addr)) != 1)
-    {
-        close(listen_fd);
-        throw std::runtime_error("bind address "+std::string(bind_address)+(r == 0 ? " is not valid" : ": no ipv4 support"));
-    }
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(bind_port);
-
-    if (bind(listen_fd, (sockaddr*)&addr, sizeof(addr)) < 0)
+    if (bind(listen_fd, &addr, sizeof(addr)) < 0)
     {
         close(listen_fd);
         throw std::runtime_error(std::string("bind: ") + strerror(errno));

src/vitastor.pc.in

@@ -6,7 +6,7 @@ includedir=${prefix}/@CMAKE_INSTALL_INCLUDEDIR@
 
 Name: Vitastor
 Description: Vitastor client library
-Version: 0.6.8
+Version: 0.6.10
 Libs: -L${libdir} -lvitastor_client
 Cflags: -I${includedir}
 

tests/common.sh

@@ -21,6 +21,7 @@ cd `dirname $0`/..
 trap 'kill -9 $(jobs -p)' EXIT
 
 ETCD=${ETCD:-etcd}
+ETCD_IP=${ETCD_IP:-127.0.0.1}
 ETCD_PORT=${ETCD_PORT:-12379}
 
 if [ "$KEEP_DATA" = "" ]; then
@@ -29,11 +30,11 @@ if [ "$KEEP_DATA" = "" ]; then
 fi
 
 $ETCD -name etcd_test --data-dir ./testdata/etcd \
-    --advertise-client-urls http://127.0.0.1:$ETCD_PORT --listen-client-urls http://127.0.0.1:$ETCD_PORT \
-    --initial-advertise-peer-urls http://127.0.0.1:$((ETCD_PORT+1)) --listen-peer-urls http://127.0.0.1:$((ETCD_PORT+1)) \
+    --advertise-client-urls http://$ETCD_IP:$ETCD_PORT --listen-client-urls http://$ETCD_IP:$ETCD_PORT \
+    --initial-advertise-peer-urls http://$ETCD_IP:$((ETCD_PORT+1)) --listen-peer-urls http://$ETCD_IP:$((ETCD_PORT+1)) \
     --max-txn-ops=100000 --auto-compaction-retention=10 --auto-compaction-mode=revision &>./testdata/etcd.log &
 ETCD_PID=$!
-ETCD_URL=127.0.0.1:$ETCD_PORT/v3
+ETCD_URL=$ETCD_IP:$ETCD_PORT/v3
 ETCDCTL="${ETCD}ctl --endpoints=http://$ETCD_URL"
 
 echo leak:fio >> testdata/lsan-suppress.txt