Add Vitastor support

Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>

.gitignore

@@ -0,0 +1,7 @@
+/*.build
+/*.buildinfo
+/*.changes
+/*.deb
+/*.dsc
+/*.tar*
+/pve-qemu-kvm-*.*/

Makefile

@@ -1,41 +1,78 @@
-include /usr/share/dpkg/pkg-info.mk
-include /usr/share/dpkg/architecture.mk
+include /usr/share/dpkg/default.mk
 
 PACKAGE = pve-qemu-kvm
 
 SRCDIR := qemu
-BUILDDIR ?= ${PACKAGE}-${DEB_VERSION_UPSTREAM}
+BUILDDIR ?= $(PACKAGE)-$(DEB_VERSION_UPSTREAM)
+ORIG_SRC_TAR=$(PACKAGE)_$(DEB_VERSION_UPSTREAM).orig.tar.gz
 
 GITVERSION := $(shell git rev-parse HEAD)
 
-DEB = ${PACKAGE}_${DEB_VERSION_UPSTREAM_REVISION}_${DEB_BUILD_ARCH}.deb
-DEB_DBG = ${PACKAGE}-dbg_${DEB_VERSION_UPSTREAM_REVISION}_${DEB_BUILD_ARCH}.deb
+DSC=$(PACKAGE)_$(DEB_VERSION_UPSTREAM_REVISION).dsc
+DEB = $(PACKAGE)_$(DEB_VERSION_UPSTREAM_REVISION)_$(DEB_BUILD_ARCH).deb
+DEB_DBG = $(PACKAGE)-dbgsym_$(DEB_VERSION_UPSTREAM_REVISION)_$(DEB_BUILD_ARCH).deb
 DEBS = $(DEB) $(DEB_DBG)
 
 all: $(DEBS)
 
 .PHONY: submodule
 submodule:
-	test -f "${SRCDIR}/configure" || git submodule update --init --recursive
+	test -f "$(SRCDIR)/configure" || git submodule update --init --recursive
+
+PC_BIOS_FW_PURGE_LIST_IN = \
+	hppa-firmware.img \
+	openbios-ppc \
+	openbios-sparc32 \
+	openbios-sparc64 \
+	palcode-clipper \
+	s390-ccw.img \
+	s390-netboot.img \
+	u-boot.e500 \
+	.*\.dtb \
+	qemu_vga.ndrv \
+	slof.bin \
+	opensbi-riscv.*-generic-fw_dynamic.bin \
+
+BLOB_PURGE_SED_CMDS = $(foreach FILE,$(PC_BIOS_FW_PURGE_LIST_IN),-e "/$(FILE)/d")
+BLOB_PURGE_FILTER = $(foreach FILE,$(PC_BIOS_FW_PURGE_LIST_IN),-e "$(FILE)")
 
 $(BUILDDIR): keycodemapdb | submodule
 	# check if qemu/ was used for a build
 	# if so, please run 'make distclean' in the submodule and try again
 	test ! -f $(SRCDIR)/build/config.status
-	rm -rf $(BUILDDIR)
-	cp -a $(SRCDIR) $(BUILDDIR)
-	cp -a debian $(BUILDDIR)/debian
-	rm -rf $(BUILDDIR)/ui/keycodemapdb
-	cp -a keycodemapdb $(BUILDDIR)/ui/
-	echo "git clone git://git.proxmox.com/git/pve-qemu.git\\ngit checkout $(GITVERSION)" > $(BUILDDIR)/debian/SOURCE
+	rm -rf $@.tmp $@
+	cp -a $(SRCDIR) $@.tmp
+	cp -a debian $@.tmp/debian
+	rm -rf $@.tmp/ui/keycodemapdb
+	rm -rf $@.tmp/roms/edk2 # packaged separately
+	cp -a keycodemapdb $@.tmp/ui/
+	find $@.tmp/pc-bios -type f | grep $(BLOB_PURGE_FILTER) | xargs rm -f
+	sed -i $(BLOB_PURGE_SED_CMDS) $@.tmp/pc-bios/meson.build
+	echo "git clone git://git.proxmox.com/git/pve-qemu.git\\ngit checkout $(GITVERSION)" > $@.tmp/debian/SOURCE
+	mv $@.tmp $@
 
 .PHONY: deb kvm
 deb kvm: $(DEBS)
 $(DEB_DBG): $(DEB)
 $(DEB): $(BUILDDIR)
-	cd $(BUILDDIR); dpkg-buildpackage -b -us -uc -j
+	cd $(BUILDDIR); dpkg-buildpackage -b -us -uc -j32
 	lintian $(DEBS)
 
+sbuild: $(DSC)
+	sbuild $(DSC)
+
+$(ORIG_SRC_TAR): $(BUILDDIR)
+	tar czf $(ORIG_SRC_TAR) --exclude="$(BUILDDIR)/debian" $(BUILDDIR)
+
+.PHONY: dsc
+dsc:
+	rm -rf *.dsc $(BUILDDIR)
+	$(MAKE) $(DSC)
+	lintian $(DSC)
+
+$(DSC): $(ORIG_SRC_TAR) $(BUILDDIR)
+	cd $(BUILDDIR); dpkg-buildpackage -S -us -uc -d
+
 .PHONY: update
 update:
 	cd $(SRCDIR) && git submodule deinit ui/keycodemapdb || true
@@ -48,13 +85,14 @@ update:
 	git add keycodemapdb
 
 .PHONY: upload
+upload: UPLOAD_DIST ?= $(DEB_DISTRIBUTION)
 upload: $(DEBS)
-	tar cf - ${DEBS} | ssh repoman@repo.proxmox.com upload --product pve --dist bullseye
+	tar cf - $(DEBS) | ssh repoman@repo.proxmox.com upload --product pve --dist $(UPLOAD_DIST)
 
 .PHONY: distclean clean
 distclean: clean
 clean:
-	rm -rf $(BUILDDIR) $(PACKAGE)*.deb *.buildinfo *.changes
+	rm -rf $(PACKAGE)-[0-9]*/ $(PACKAGE)*.tar* *.deb *.dsc *.build *.buildinfo *.changes
 
 .PHONY: dinstall
 dinstall: $(DEBS)

debian/changelog

@@ -1,3 +1,192 @@
+pve-qemu-kvm (8.0.2-3+vitastor1) bookworm; urgency=medium
+
+  * Add Vitastor support
+
+ -- Vitaliy Filippov <vitalif@yourcmc.ru>  Sat, 24 Jun 2023 00:50:32 +0300
+
+pve-qemu-kvm (8.0.2-3) bookworm; urgency=medium
+
+  * fix regression in QEMU 8.0 for drive mirror with bitmap
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Jun 2023 13:57:46 +0200
+
+pve-qemu-kvm (8.0.2-2) bookworm; urgency=medium
+
+  * drop custom get_link_status QMP command, was never really used.
+
+  * drop custom & deprecated drive snapshot QMP commands, we use a better
+    alternative since a while.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 09 Jun 2023 07:57:56 +0200
+
+pve-qemu-kvm (8.0.2-1) bookworm; urgency=medium
+
+  * update to QEMU stable release 8.0.2
+
+  * update patches for avoiding issues with DMA reentrancy to current,
+    slightly optimized version.
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 06 Jun 2023 16:34:50 +0200
+
+pve-qemu-kvm (8.0.0-1) bookworm; urgency=medium
+
+  * update to QEMU stable release 8.0.0
+
+  * re-build for Proxmox VE 8 / Debian 12 Bookworm
+
+  * adapt to the local virtiofsd C variant being dropped, it has been
+    rewritten in Rust and is now hosted in a separate source repository.
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 22 May 2023 13:45:49 +0200
+
+pve-qemu-kvm (7.2.0-8) bullseye; urgency=medium
+
+  * backport fix for ACPI CPU hotplug issue with TCG
+
+  * cherry-pick TCG-related stable fixes for 7.2 for users that turned off KVM
+    HW acceleration
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 17 Mar 2023 15:47:08 +0100
+
+pve-qemu-kvm (7.2.0-7) bullseye; urgency=medium
+
+  * improve fix for potential deadlock with trim for IDE/SATA and draining
+
+  * backport stable fixes:
+    - hw/nvme: fix missing endian conversions for doorbell buffers
+    - hw/smbios: fix field corruption in type 4 table
+    - virtio-rng-pci: fix transitional migration compat for vectors
+    - hw/timer/hpet: Fix expiration time overflow
+    - vhost/vdpa: stop all svq on device deletion
+    - vhost: avoid a potential use of an uninitialized variable in the call to
+      vhost_svq_poll
+    - chardev/char-socket: set s->listener = NULL in char_socket_finalize to
+      fix a potential crash after live-migration
+    - intel-iommu: fail MAP notifier without caching mode
+    - intel-iommu: fail DEVIOTLB_UNMAP without dt mode
+
+  * fix a regression for when the LSI SCSI controller is used
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Mar 2023 17:42:49 +0100
+
+pve-qemu-kvm (7.2.0-6) bullseye; urgency=medium
+
+  * fix 7.2 regression for Linux boot failures with megasas SCSI
+
+  * fix 7.0 regression for a potential deadlock with trim for IDE/SATA and
+    draining
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 08 Mar 2023 14:32:17 +0100
+
+pve-qemu-kvm (7.2.0-5) bullseye; urgency=medium
+
+  * fix #4476: savevm-async: avoid looping without progress
+
+  * savevm-async: decrease the boundary for free space for (memory) state left
+    on target from 30 MiB to 100 MiB, improving the heuristic for when to
+    enter the final "pause and sync" stage.
+
+  * QMP backup: use correct error number when getting blockdrive length fails
+
+  * backport fix for some DMA reentrancy issues, better protecting against
+    malicious guests
+
+  * backport fix for iSCSI double free issue leading to crashes
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Feb 2023 13:49:43 +0100
+
+pve-qemu-kvm (7.2.0-4) bullseye; urgency=medium
+
+  * backport fix for a 7.2 regression when using VirtIO disk with
+    detect-zeroes=unmap
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Jan 2023 09:37:49 +0100
+
+pve-qemu-kvm (7.2.0-3) bullseye; urgency=medium
+
+  * add fix for live-migration with virtio-rng devices, which regressed in
+    QEMU 7.2.0.
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 12 Jan 2023 13:13:14 +0100
+
+pve-qemu-kvm (7.2.0-2) bullseye; urgency=medium
+
+  * enable slirp again for now, as in qemu-server, user networking is
+    supported (via CLI/API) when no bridge is set on a virtual NIC
+
+  * cherry-pick stable fixes for 7.2. Two for virtio-mem and one for vIOMMU.
+    Both features are not yet exposed in PVE's qemu-server, but there's work
+    going on to change that.
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 10 Jan 2023 15:47:48 +0100
+
+pve-qemu-kvm (7.2.0-1) bullseye; urgency=medium
+
+  * update to QEMU stable release 7.2.0
+
+  * drop 'slirp' networking
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Dec 2022 13:18:21 +0100
+
+pve-qemu-kvm (7.1.0-4) bullseye; urgency=medium
+
+  * cherry-pick "block/block-backend: blk_set_enable_write_cache is IO_CODE"
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Nov 2022 09:21:06 +0100
+
+pve-qemu-kvm (7.1.0-3) bullseye; urgency=medium
+
+  * init: daemonize: defuse PID file resolve error to a warning at max, fixing
+    some usecases that regressed with 7.1, like tracking start up in our
+    file-restore VM.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Oct 2022 10:27:49 +0200
+
+pve-qemu-kvm (7.1.0-2) bullseye; urgency=medium
+
+  * fix an issue with error handling in async backup code
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 18 Oct 2022 15:33:44 +0200
+
+pve-qemu-kvm (7.1.0-1) bullseye; urgency=medium
+
+  * update to QEMU stable release 7.1.0
+
+  * add fix for io_uring_register_ring_fd from upstream
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 14 Oct 2022 14:54:09 +0200
+
+pve-qemu-kvm (7.0.0-4) bullseye; urgency=medium
+
+  * add revision to version output
+
+  * PVE Backup: allow passing max-workers performance setting
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Oct 2022 11:55:37 +0200
+
+pve-qemu-kvm (7.0.0-3) bullseye; urgency=medium
+
+  * savevm-async: avoid segfault when aborting snapshot creation task
+
+  * savevm-async: set SAVE_STATE_DONE when closing state file was successful
+    allowing one to start a new snapshot task after aborting one.
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 30 Aug 2022 12:54:03 +0200
+
+pve-qemu-kvm (7.0.0-2) bullseye; urgency=medium
+
+  * backport "io_uring: fix short read slow path"
+
+  * backport "e1000: set RX descriptor status in a separate operation"
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Jul 2022 09:17:07 +0200
+
+pve-qemu-kvm (7.0.0-1) bullseye; urgency=medium
+
+  * update to QEMU stable release 7.0.0
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Jun 2022 11:07:37 +0200
+
 pve-qemu-kvm (6.2.0-11) bullseye; urgency=medium
 
   * add 'namespace' to BlockdevOptionsPbs for live-restore support

debian/compat

@@ -1 +0,0 @@
-10

debian/control

@@ -2,9 +2,8 @@ Source: pve-qemu-kvm
 Section: admin
 Priority: optional
 Maintainer: Proxmox Support Team <support@proxmox.com>
-Build-Depends: autotools-dev,
+Build-Depends: debhelper-compat (= 13),
                check,
-               debhelper (>= 9),
                libacl1-dev,
                libaio-dev,
                libattr1-dev,
@@ -16,21 +15,21 @@ Build-Depends: autotools-dev,
                libglusterfs-dev (>= 5.2-2),
                libgnutls28-dev,
                libiscsi-dev (>= 1.12.0),
-               libjemalloc-dev,
                libjpeg-dev,
                libjson-perl,
                libnuma-dev,
                libpci-dev,
                libpixman-1-dev,
-               libproxmox-backup-qemu0-dev (>= 1.3.0-1),
+               libproxmox-backup-qemu0-dev (>= 1.3.0),
                librbd-dev (>= 0.48),
                libsdl1.2-dev,
                libseccomp-dev,
+               libslirp-dev,
                libspice-protocol-dev (>= 0.12.14~),
                libspice-server-dev (>= 0.14.0~),
                libsystemd-dev,
                liburing-dev,
-               libusb-1.0-0-dev (>= 1.0.17-1),
+               libusb-1.0-0-dev (>= 1.0.17),
                libusbredirparser-dev (>= 0.6-2),
                libvirglrenderer-dev,
                libzstd-dev,
@@ -39,8 +38,6 @@ Build-Depends: autotools-dev,
                python3-sphinx,
                python3-sphinx-rtd-theme,
                quilt,
-               texi2html,
-               texinfo,
                uuid-dev,
                xfslibs-dev,
 Standards-Version: 3.7.2
@@ -57,7 +54,6 @@ Depends: ceph-common (>= 0.48),
          libglusterfs-dev | glusterfs-common (>= 5.6),
          libglusterfs0 | glusterfs-common (>= 5.6),
          libiscsi4 (>= 1.12.0) | libiscsi7,
-         libjemalloc2,
          libjpeg62-turbo,
          libspice-server1 (>= 0.14.0~),
          libusb-1.0-0 (>= 1.0.17-1),
@@ -65,8 +61,8 @@ Depends: ceph-common (>= 0.48),
          libuuid1,
          ${misc:Depends},
          ${shlibs:Depends},
-Recommends: numactl
-Suggests: libgl1
+Recommends: numactl,
+Suggests: libgl1,
 Conflicts: kvm,
            pve-kvm,
            pve-qemu-kvm-2.6.18,
@@ -74,9 +70,10 @@ Conflicts: kvm,
            qemu-kvm,
            qemu-system-arm,
            qemu-system-common,
+           qemu-system-data,
            qemu-system-x86,
            qemu-utils,
-Provides: qemu-system-arm, qemu-system-x86, qemu-utils
+Provides: qemu-system-arm, qemu-system-x86, qemu-utils,
 Replaces: pve-kvm,
           pve-qemu-kvm-2.6.18,
           qemu-system-arm,
@@ -86,10 +83,3 @@ Description: Full virtualization on x86 hardware
  Using KVM, one can run multiple virtual PCs, each running unmodified Linux or
  Windows images. Each virtual machine has private virtualized hardware: a
  network card, disk, graphics adapter, etc.
-
-Package: pve-qemu-kvm-dbg
-Architecture: any
-Section: debug
-Depends: pve-qemu-kvm (= ${binary:Version})
-Description: pve qemu debugging symbols
- This package contains the debugging symbols for pve-qemu-kvm.

debian/parse-machines.pl

@@ -24,4 +24,5 @@ while (<STDIN>) {
 
 die "no QEMU machine types detected from STDIN input" if scalar (@$machines) <= 0;
 
-print to_json($machines, { utf8 => 1 }) or die "$!\n";
+print to_json($machines, { utf8 => 1, canonical => 1 })
+    or die "failed to encode detected machines as JSON - $!\n";

debian/patches/bitmap-mirror/0001-drive-mirror-add-support-for-sync-bitmap-mode-never.patch

@@ -27,19 +27,21 @@ Signed-off-by: Ma Haocong <mahaocong@didichuxing.com>
 Signed-off-by: John Snow <jsnow@redhat.com>
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: rebased for 8.0]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/mirror.c                   | 98 +++++++++++++++++++++++++-------
- blockdev.c                       | 39 ++++++++++++-
- include/block/block_int.h        |  4 +-
- qapi/block-core.json             | 29 ++++++++--
- tests/unit/test-block-iothread.c |  4 +-
- 5 files changed, 145 insertions(+), 29 deletions(-)
+ block/mirror.c                         | 98 +++++++++++++++++++++-----
+ blockdev.c                             | 38 +++++++++-
+ include/block/block_int-global-state.h |  4 +-
+ qapi/block-core.json                   | 29 ++++++--
+ tests/unit/test-block-iothread.c       |  4 +-
+ 5 files changed, 144 insertions(+), 29 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index efec2c7674..f7804638f9 100644
+index 663e2b7002..9099c75992 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -50,7 +50,7 @@ typedef struct MirrorBlockJob {
+@@ -51,7 +51,7 @@ typedef struct MirrorBlockJob {
      BlockDriverState *to_replace;
      /* Used to block operations on the drive-mirror-replace target */
      Error *replace_blocker;
@@ -48,7 +50,7 @@ index efec2c7674..f7804638f9 100644
      BlockMirrorBackingMode backing_mode;
      /* Whether the target image requires explicit zero-initialization */
      bool zero_target;
-@@ -64,6 +64,8 @@ typedef struct MirrorBlockJob {
+@@ -65,6 +65,8 @@ typedef struct MirrorBlockJob {
      size_t buf_size;
      int64_t bdev_length;
      unsigned long *cow_bitmap;
@@ -57,7 +59,7 @@ index efec2c7674..f7804638f9 100644
      BdrvDirtyBitmap *dirty_bitmap;
      BdrvDirtyBitmapIter *dbi;
      uint8_t *buf;
-@@ -695,7 +697,8 @@ static int mirror_exit_common(Job *job)
+@@ -703,7 +705,8 @@ static int mirror_exit_common(Job *job)
      bdrv_child_refresh_perms(mirror_top_bs, mirror_top_bs->backing,
                               &error_abort);
      if (!abort && s->backing_mode == MIRROR_SOURCE_BACKING_CHAIN) {
@@ -67,7 +69,7 @@ index efec2c7674..f7804638f9 100644
          BlockDriverState *unfiltered_target = bdrv_skip_filters(target_bs);
  
          if (bdrv_cow_bs(unfiltered_target) != backing) {
-@@ -800,6 +803,16 @@ static void mirror_abort(Job *job)
+@@ -801,6 +804,16 @@ static void mirror_abort(Job *job)
      assert(ret == 0);
  }
  
@@ -84,7 +86,7 @@ index efec2c7674..f7804638f9 100644
  static void coroutine_fn mirror_throttle(MirrorBlockJob *s)
  {
      int64_t now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
-@@ -979,7 +992,8 @@ static int coroutine_fn mirror_run(Job *job, Error **errp)
+@@ -987,7 +1000,8 @@ static int coroutine_fn mirror_run(Job *job, Error **errp)
      mirror_free_init(s);
  
      s->last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
@@ -94,7 +96,7 @@ index efec2c7674..f7804638f9 100644
          ret = mirror_dirty_init(s);
          if (ret < 0 || job_is_cancelled(&s->common.job)) {
              goto immediate_exit;
-@@ -1221,6 +1235,7 @@ static const BlockJobDriver mirror_job_driver = {
+@@ -1240,6 +1254,7 @@ static const BlockJobDriver mirror_job_driver = {
          .run                    = mirror_run,
          .prepare                = mirror_prepare,
          .abort                  = mirror_abort,
@@ -102,7 +104,7 @@ index efec2c7674..f7804638f9 100644
          .pause                  = mirror_pause,
          .complete               = mirror_complete,
          .cancel                 = mirror_cancel,
-@@ -1237,6 +1252,7 @@ static const BlockJobDriver commit_active_job_driver = {
+@@ -1256,6 +1271,7 @@ static const BlockJobDriver commit_active_job_driver = {
          .run                    = mirror_run,
          .prepare                = mirror_prepare,
          .abort                  = mirror_abort,
@@ -110,7 +112,7 @@ index efec2c7674..f7804638f9 100644
          .pause                  = mirror_pause,
          .complete               = mirror_complete,
          .cancel                 = commit_active_cancel,
-@@ -1602,7 +1618,10 @@ static BlockJob *mirror_start_job(
+@@ -1647,7 +1663,10 @@ static BlockJob *mirror_start_job(
                               BlockCompletionFunc *cb,
                               void *opaque,
                               const BlockJobDriver *driver,
@@ -122,11 +124,12 @@ index efec2c7674..f7804638f9 100644
                               bool auto_complete, const char *filter_node_name,
                               bool is_mirror, MirrorCopyMode copy_mode,
                               Error **errp)
-@@ -1614,10 +1633,39 @@ static BlockJob *mirror_start_job(
+@@ -1659,10 +1678,39 @@ static BlockJob *mirror_start_job(
      uint64_t target_perms, target_shared_perms;
      int ret;
  
 -    if (granularity == 0) {
+-        granularity = bdrv_get_default_bitmap_granularity(target);
 +    if (sync_mode == MIRROR_SYNC_MODE_INCREMENTAL) {
 +        error_setg(errp, "Sync mode '%s' not supported",
 +                   MirrorSyncMode_str(sync_mode));
@@ -147,8 +150,8 @@ index efec2c7674..f7804638f9 100644
 +                   "sync mode '%s' is not compatible with bitmaps",
 +                   MirrorSyncMode_str(sync_mode));
 +        return NULL;
-+    }
-+
+     }
+ 
 +    if (bitmap) {
 +        if (granularity) {
 +            error_setg(errp, "granularity (%d)"
@@ -158,13 +161,12 @@ index efec2c7674..f7804638f9 100644
 +        }
 +        granularity = bdrv_dirty_bitmap_granularity(bitmap);
 +    } else if (granularity == 0) {
-         granularity = bdrv_get_default_bitmap_granularity(target);
-     }
--
++        granularity = bdrv_get_default_bitmap_granularity(target);
++    }
      assert(is_power_of_2(granularity));
  
      if (buf_size < 0) {
-@@ -1755,7 +1803,9 @@ static BlockJob *mirror_start_job(
+@@ -1793,7 +1841,9 @@ static BlockJob *mirror_start_job(
      s->replaces = g_strdup(replaces);
      s->on_source_error = on_source_error;
      s->on_target_error = on_target_error;
@@ -175,7 +177,7 @@ index efec2c7674..f7804638f9 100644
      s->backing_mode = backing_mode;
      s->zero_target = zero_target;
      s->copy_mode = copy_mode;
-@@ -1776,6 +1826,18 @@ static BlockJob *mirror_start_job(
+@@ -1814,6 +1864,18 @@ static BlockJob *mirror_start_job(
          bdrv_disable_dirty_bitmap(s->dirty_bitmap);
      }
  
@@ -194,7 +196,7 @@ index efec2c7674..f7804638f9 100644
      ret = block_job_add_bdrv(&s->common, "source", bs, 0,
                               BLK_PERM_WRITE_UNCHANGED | BLK_PERM_WRITE |
                               BLK_PERM_CONSISTENT_READ,
-@@ -1853,6 +1915,9 @@ fail:
+@@ -1891,6 +1953,9 @@ fail:
          if (s->dirty_bitmap) {
              bdrv_release_dirty_bitmap(s->dirty_bitmap);
          }
@@ -204,7 +206,7 @@ index efec2c7674..f7804638f9 100644
          job_early_fail(&s->common.job);
      }
  
-@@ -1870,29 +1935,23 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
+@@ -1908,31 +1973,25 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
                    BlockDriverState *target, const char *replaces,
                    int creation_flags, int64_t speed,
                    uint32_t granularity, int64_t buf_size,
@@ -221,6 +223,8 @@ index efec2c7674..f7804638f9 100644
 -    bool is_none_mode;
      BlockDriverState *base;
  
+     GLOBAL_STATE_CODE();
+ 
 -    if ((mode == MIRROR_SYNC_MODE_INCREMENTAL) ||
 -        (mode == MIRROR_SYNC_MODE_BITMAP)) {
 -        error_setg(errp, "Sync mode '%s' not supported",
@@ -239,7 +243,7 @@ index efec2c7674..f7804638f9 100644
  }
  
  BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
-@@ -1917,7 +1976,8 @@ BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
+@@ -1959,7 +2018,8 @@ BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
                       job_id, bs, creation_flags, base, NULL, speed, 0, 0,
                       MIRROR_LEAVE_BACKING_CHAIN, false,
                       on_error, on_error, true, cb, opaque,
@@ -250,21 +254,20 @@ index efec2c7674..f7804638f9 100644
                       errp);
      if (!job) {
 diff --git a/blockdev.c b/blockdev.c
-index b35072644e..9940116fe0 100644
+index e464daea58..50e4a9c682 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -2956,6 +2956,10 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2942,6 +2942,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
                                     BlockDriverState *target,
-                                    bool has_replaces, const char *replaces,
+                                    const char *replaces,
                                     enum MirrorSyncMode sync,
-+                                   bool has_bitmap,
 +                                   const char *bitmap_name,
 +                                   bool has_bitmap_mode,
 +                                   BitmapSyncMode bitmap_mode,
                                     BlockMirrorBackingMode backing_mode,
                                     bool zero_target,
                                     bool has_speed, int64_t speed,
-@@ -2975,6 +2979,7 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2960,6 +2963,7 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
  {
      BlockDriverState *unfiltered_bs;
      int job_flags = JOB_DEFAULT;
@@ -272,11 +275,11 @@ index b35072644e..9940116fe0 100644
  
      if (!has_speed) {
          speed = 0;
-@@ -3029,6 +3034,29 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -3011,6 +3015,29 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          sync = MIRROR_SYNC_MODE_FULL;
      }
  
-+    if (has_bitmap) {
++    if (bitmap_name) {
 +        if (granularity) {
 +            error_setg(errp, "Granularity and bitmap cannot both be set");
 +            return;
@@ -299,53 +302,53 @@ index b35072644e..9940116fe0 100644
 +        }
 +    }
 +
-     if (!has_replaces) {
+     if (!replaces) {
          /* We want to mirror from @bs, but keep implicit filters on top */
          unfiltered_bs = bdrv_skip_implicit_filters(bs);
-@@ -3075,8 +3103,8 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -3056,8 +3083,8 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
       * and will allow to check whether the node still exist at mirror completion
       */
      mirror_start(job_id, bs, target,
--                 has_replaces ? replaces : NULL, job_flags,
+-                 replaces, job_flags,
 -                 speed, granularity, buf_size, sync, backing_mode, zero_target,
-+                 has_replaces ? replaces : NULL, job_flags, speed, granularity,
-+                 buf_size, sync, bitmap, bitmap_mode, backing_mode, zero_target,
++                 replaces, job_flags, speed, granularity, buf_size, sync,
++                 bitmap, bitmap_mode, backing_mode, zero_target,
                   on_source_error, on_target_error, unmap, filter_node_name,
                   copy_mode, errp);
  }
-@@ -3221,6 +3249,8 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
+@@ -3202,6 +3229,8 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
  
-     blockdev_mirror_common(arg->has_job_id ? arg->job_id : NULL, bs, target_bs,
-                            arg->has_replaces, arg->replaces, arg->sync,
-+                           arg->has_bitmap, arg->bitmap,
+     blockdev_mirror_common(arg->job_id, bs, target_bs,
+                            arg->replaces, arg->sync,
++                           arg->bitmap,
 +                           arg->has_bitmap_mode, arg->bitmap_mode,
                             backing_mode, zero_target,
                             arg->has_speed, arg->speed,
                             arg->has_granularity, arg->granularity,
-@@ -3242,6 +3272,8 @@ void qmp_blockdev_mirror(bool has_job_id, const char *job_id,
+@@ -3223,6 +3252,8 @@ void qmp_blockdev_mirror(const char *job_id,
                           const char *device, const char *target,
-                          bool has_replaces, const char *replaces,
+                          const char *replaces,
                           MirrorSyncMode sync,
-+                         bool has_bitmap, const char *bitmap,
++                         const char *bitmap,
 +                         bool has_bitmap_mode, BitmapSyncMode bitmap_mode,
                           bool has_speed, int64_t speed,
                           bool has_granularity, uint32_t granularity,
                           bool has_buf_size, int64_t buf_size,
-@@ -3291,7 +3323,8 @@ void qmp_blockdev_mirror(bool has_job_id, const char *job_id,
+@@ -3271,7 +3302,8 @@ void qmp_blockdev_mirror(const char *job_id,
      }
  
-     blockdev_mirror_common(has_job_id ? job_id : NULL, bs, target_bs,
--                           has_replaces, replaces, sync, backing_mode,
-+                           has_replaces, replaces, sync, has_bitmap,
+     blockdev_mirror_common(job_id, bs, target_bs,
+-                           replaces, sync, backing_mode,
++                           replaces, sync,
 +                           bitmap, has_bitmap_mode, bitmap_mode, backing_mode,
                             zero_target, has_speed, speed,
                             has_granularity, granularity,
                             has_buf_size, buf_size,
-diff --git a/include/block/block_int.h b/include/block/block_int.h
-index f4c75e8ba9..ee0aeb1414 100644
---- a/include/block/block_int.h
-+++ b/include/block/block_int.h
-@@ -1287,7 +1287,9 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
+diff --git a/include/block/block_int-global-state.h b/include/block/block_int-global-state.h
+index 902406eb99..d559be928c 100644
+--- a/include/block/block_int-global-state.h
++++ b/include/block/block_int-global-state.h
+@@ -152,7 +152,9 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
                    BlockDriverState *target, const char *replaces,
                    int creation_flags, int64_t speed,
                    uint32_t granularity, int64_t buf_size,
@@ -357,10 +360,10 @@ index f4c75e8ba9..ee0aeb1414 100644
                    BlockdevOnError on_source_error,
                    BlockdevOnError on_target_error,
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 1d3dd9cb48..da5dca1e3b 100644
+index c05ad0c07e..3c945c1f93 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -1995,10 +1995,19 @@
+@@ -2095,10 +2095,19 @@
  #        (all the disk, only the sectors allocated in the topmost image, or
  #        only new I/O).
  #
@@ -381,7 +384,7 @@ index 1d3dd9cb48..da5dca1e3b 100644
  #
  # @buf-size: maximum amount of data in flight from source to
  #            target (since 1.4).
-@@ -2036,7 +2045,9 @@
+@@ -2138,7 +2147,9 @@
  { 'struct': 'DriveMirror',
    'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
              '*format': 'str', '*node-name': 'str', '*replaces': 'str',
@@ -392,7 +395,7 @@ index 1d3dd9cb48..da5dca1e3b 100644
              '*speed': 'int', '*granularity': 'uint32',
              '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
              '*on-target-error': 'BlockdevOnError',
-@@ -2308,10 +2319,19 @@
+@@ -2417,10 +2428,19 @@
  #        (all the disk, only the sectors allocated in the topmost image, or
  #        only new I/O).
  #
@@ -413,7 +416,7 @@ index 1d3dd9cb48..da5dca1e3b 100644
  #
  # @buf-size: maximum amount of data in flight from source to
  #            target
-@@ -2360,7 +2380,8 @@
+@@ -2470,7 +2490,8 @@
  { 'command': 'blockdev-mirror',
    'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
              '*replaces': 'str',
@@ -424,10 +427,10 @@ index 1d3dd9cb48..da5dca1e3b 100644
              '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
              '*on-target-error': 'BlockdevOnError',
 diff --git a/tests/unit/test-block-iothread.c b/tests/unit/test-block-iothread.c
-index aea660aeed..22b9770a3e 100644
+index 3a5e1eb2c4..c1ecc49073 100644
 --- a/tests/unit/test-block-iothread.c
 +++ b/tests/unit/test-block-iothread.c
-@@ -626,8 +626,8 @@ static void test_propagate_mirror(void)
+@@ -757,8 +757,8 @@ static void test_propagate_mirror(void)
  
      /* Start a mirror job */
      mirror_start("job0", src, target, NULL, JOB_DEFAULT, 0, 0, 0,
@@ -437,4 +440,4 @@ index aea660aeed..22b9770a3e 100644
 +                 false, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
                   false, "filter_node", MIRROR_COPY_MODE_BACKGROUND,
                   &error_abort);
-     job = job_get("job0");
+     WITH_JOB_LOCK_GUARD() {

debian/patches/bitmap-mirror/0002-drive-mirror-add-support-for-conditional-and-always-.patch

@@ -24,10 +24,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 18 insertions(+), 6 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index f7804638f9..4f5f74e2cf 100644
+index 9099c75992..e2ff42067b 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -672,8 +672,6 @@ static int mirror_exit_common(Job *job)
+@@ -680,8 +680,6 @@ static int mirror_exit_common(Job *job)
          bdrv_unfreeze_backing_chain(mirror_top_bs, target_bs);
      }
  
@@ -36,9 +36,9 @@ index f7804638f9..4f5f74e2cf 100644
      /* Make sure that the source BDS doesn't go away during bdrv_replace_node,
       * before we can call bdrv_drained_end */
      bdrv_ref(src);
-@@ -781,6 +779,18 @@ static int mirror_exit_common(Job *job)
-     blk_set_perm(bjob->blk, 0, BLK_PERM_ALL, &error_abort);
-     blk_insert_bs(bjob->blk, mirror_top_bs, &error_abort);
+@@ -782,6 +780,18 @@ static int mirror_exit_common(Job *job)
+     block_job_remove_all_bdrv(bjob);
+     bdrv_replace_node(mirror_top_bs, mirror_top_bs->backing->bs, &error_abort);
  
 +    if (s->sync_bitmap) {
 +        if (s->bitmap_mode == BITMAP_SYNC_MODE_ALWAYS ||
@@ -55,7 +55,7 @@ index f7804638f9..4f5f74e2cf 100644
      bs_opaque->job = NULL;
  
      bdrv_drained_end(src);
-@@ -1643,10 +1653,6 @@ static BlockJob *mirror_start_job(
+@@ -1688,10 +1698,6 @@ static BlockJob *mirror_start_job(
                         " sync mode",
                         MirrorSyncMode_str(sync_mode));
              return NULL;
@@ -66,7 +66,7 @@ index f7804638f9..4f5f74e2cf 100644
          }
      } else if (bitmap) {
          error_setg(errp,
-@@ -1663,6 +1669,12 @@ static BlockJob *mirror_start_job(
+@@ -1708,6 +1714,12 @@ static BlockJob *mirror_start_job(
              return NULL;
          }
          granularity = bdrv_dirty_bitmap_granularity(bitmap);

debian/patches/bitmap-mirror/0003-mirror-add-check-for-bitmap-mode-without-bitmap.patch

@@ -16,10 +16,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 3 insertions(+)
 
 diff --git a/blockdev.c b/blockdev.c
-index 9940116fe0..b113e57d68 100644
+index 50e4a9c682..e6b2b1e338 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -3055,6 +3055,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -3036,6 +3036,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_ALLOW_RO, errp)) {
              return;
          }
@@ -28,4 +28,4 @@ index 9940116fe0..b113e57d68 100644
 +        return;
      }
  
-     if (!has_replaces) {
+     if (!replaces) {

debian/patches/bitmap-mirror/0004-mirror-switch-to-bdrv_dirty_bitmap_merge_internal.patch

@@ -16,10 +16,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 4 insertions(+), 7 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index 4f5f74e2cf..7024f3bbf0 100644
+index e2ff42067b..f42953837b 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -785,8 +785,8 @@ static int mirror_exit_common(Job *job)
+@@ -786,8 +786,8 @@ static int mirror_exit_common(Job *job)
               job->ret == 0 && ret == 0)) {
              /* Success; synchronize copy back to sync. */
              bdrv_clear_dirty_bitmap(s->sync_bitmap, NULL);
@@ -30,7 +30,7 @@ index 4f5f74e2cf..7024f3bbf0 100644
          }
      }
      bdrv_release_dirty_bitmap(s->dirty_bitmap);
-@@ -1843,11 +1843,8 @@ static BlockJob *mirror_start_job(
+@@ -1881,11 +1881,8 @@ static BlockJob *mirror_start_job(
      }
  
      if (s->sync_mode == MIRROR_SYNC_MODE_BITMAP) {

debian/patches/bitmap-mirror/0006-mirror-move-some-checks-to-qmp.patch

@@ -12,6 +12,8 @@ uniform w.r.t. backup block jobs.
 
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: rebase for 8.0]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/mirror.c             | 28 +++------------
  blockdev.c                 | 29 +++++++++++++++
@@ -19,10 +21,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  3 files changed, 70 insertions(+), 59 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index 7024f3bbf0..6211ff22fc 100644
+index f42953837b..8f79efaa87 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -1643,31 +1643,13 @@ static BlockJob *mirror_start_job(
+@@ -1688,31 +1688,13 @@ static BlockJob *mirror_start_job(
      uint64_t target_perms, target_shared_perms;
      int ret;
  
@@ -60,17 +62,17 @@ index 7024f3bbf0..6211ff22fc 100644
  
          if (bitmap_mode != BITMAP_SYNC_MODE_NEVER) {
 diff --git a/blockdev.c b/blockdev.c
-index b113e57d68..4be0863050 100644
+index e6b2b1e338..bdae211a54 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -3034,7 +3034,36 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -3015,7 +3015,36 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          sync = MIRROR_SYNC_MODE_FULL;
      }
  
 +    if ((sync == MIRROR_SYNC_MODE_BITMAP) ||
 +        (sync == MIRROR_SYNC_MODE_INCREMENTAL)) {
 +        /* done before desugaring 'incremental' to print the right message */
-+        if (!has_bitmap) {
++        if (!bitmap_name) {
 +            error_setg(errp, "Must provide a valid bitmap name for "
 +                       "'%s' sync mode", MirrorSyncMode_str(sync));
 +            return;
@@ -91,7 +93,7 @@ index b113e57d68..4be0863050 100644
 +        bitmap_mode = BITMAP_SYNC_MODE_ON_SUCCESS;
 +    }
 +
-     if (has_bitmap) {
+     if (bitmap_name) {
 +        if (sync != MIRROR_SYNC_MODE_BITMAP) {
 +            error_setg(errp, "Sync mode '%s' not supported with bitmap.",
 +                       MirrorSyncMode_str(sync));

debian/patches/extra/0001-monitor-qmp-fix-race-with-clients-disconnecting-earl.patch

@@ -48,7 +48,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  6 files changed, 59 insertions(+), 5 deletions(-)
 
 diff --git a/include/monitor/monitor.h b/include/monitor/monitor.h
-index 12d395d62d..b182943324 100644
+index 033390f699..ad35d4fea8 100644
 --- a/include/monitor/monitor.h
 +++ b/include/monitor/monitor.h
 @@ -16,6 +16,7 @@ extern QemuOptsList qemu_mon_opts;
@@ -60,10 +60,10 @@ index 12d395d62d..b182943324 100644
  void monitor_init_globals(void);
  void monitor_init_globals_core(void);
 diff --git a/monitor/monitor-internal.h b/monitor/monitor-internal.h
-index 3da3f86c6a..9953e0cd2d 100644
+index 53e3808054..a19f8cbc2b 100644
 --- a/monitor/monitor-internal.h
 +++ b/monitor/monitor-internal.h
-@@ -151,6 +151,13 @@ typedef struct {
+@@ -152,6 +152,13 @@ typedef struct {
      QemuMutex qmp_queue_lock;
      /* Input queue that holds all the parsed QMP requests */
      GQueue *qmp_requests;
@@ -78,7 +78,7 @@ index 3da3f86c6a..9953e0cd2d 100644
  
  /**
 diff --git a/monitor/monitor.c b/monitor/monitor.c
-index 21c7a68758..ad9813567a 100644
+index 8dc96f6af9..f3c38cb714 100644
 --- a/monitor/monitor.c
 +++ b/monitor/monitor.c
 @@ -135,6 +135,21 @@ bool monitor_cur_is_qmp(void)
@@ -144,10 +144,10 @@ index 092c527b6f..6b8cfcf6d8 100644
          monitor_qmp_caps_reset(mon);
          data = qmp_greeting(mon);
 diff --git a/qapi/qmp-dispatch.c b/qapi/qmp-dispatch.c
-index d378bccac7..fb8936e7cd 100644
+index 0990873ec8..e605003771 100644
 --- a/qapi/qmp-dispatch.c
 +++ b/qapi/qmp-dispatch.c
-@@ -118,16 +118,28 @@ typedef struct QmpDispatchBH {
+@@ -117,16 +117,28 @@ typedef struct QmpDispatchBH {
      QObject **ret;
      Error **errp;
      Coroutine *co;
@@ -180,7 +180,7 @@ index d378bccac7..fb8936e7cd 100644
      aio_co_wake(data->co);
  }
  
-@@ -232,6 +244,7 @@ QDict *qmp_dispatch(const QmpCommandList *cmds, QObject *request,
+@@ -231,6 +243,7 @@ QDict *qmp_dispatch(const QmpCommandList *cmds, QObject *request,
              .ret        = &ret,
              .errp       = &err,
              .co         = qemu_coroutine_self(),
@@ -189,10 +189,10 @@ index d378bccac7..fb8936e7cd 100644
          aio_bh_schedule_oneshot(qemu_get_aio_context(), do_qmp_dispatch_bh,
                                  &data);
 diff --git a/stubs/monitor-core.c b/stubs/monitor-core.c
-index d058a2a00d..3290b58120 100644
+index afa477aae6..d3ff124bf3 100644
 --- a/stubs/monitor-core.c
 +++ b/stubs/monitor-core.c
-@@ -13,6 +13,11 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon)
+@@ -12,6 +12,11 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon)
      return NULL;
  }
  

debian/patches/extra/0002-monitor-hmp-add-support-for-flag-argument-with-value.patch

@@ -1,55 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 1 Sep 2021 16:51:04 +0200
-Subject: [PATCH] monitor/hmp: add support for flag argument with value
-
-Adds support for the "-xS" parameter type, where "-x" denotes a flag
-name and the "S" suffix indicates that this flag is supposed to take an
-arbitrary string parameter.
-
-These parameters are always optional, the entry in the qdict will be
-omitted if the flag is not given.
-
-Reviewed-by: Eric Blake <eblake@redhat.com>
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- monitor/hmp.c | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
-diff --git a/monitor/hmp.c b/monitor/hmp.c
-index b20737e63c..b29dbb1833 100644
---- a/monitor/hmp.c
-+++ b/monitor/hmp.c
-@@ -981,6 +981,7 @@ static QDict *monitor_parse_arguments(Monitor *mon,
-             {
-                 const char *tmp = p;
-                 int skip_key = 0;
-+                int ret;
-                 /* option */
- 
-                 c = *typestr++;
-@@ -1003,8 +1004,22 @@ static QDict *monitor_parse_arguments(Monitor *mon,
-                     }
-                     if (skip_key) {
-                         p = tmp;
-+                    } else if (*typestr == 'S') {
-+                        /* has option with string value */
-+                        typestr++;
-+                        tmp = p++;
-+                        while (qemu_isspace(*p)) {
-+                            p++;
-+                        }
-+                        ret = get_str(buf, sizeof(buf), &p);
-+                        if (ret < 0) {
-+                            monitor_printf(mon, "%s: value expected for -%c\n",
-+                                           cmd->name, *tmp);
-+                            goto fail;
-+                        }
-+                        qdict_put_str(qdict, key, buf);
-                     } else {
--                        /* has option */
-+                        /* has boolean option */
-                         p++;
-                         qdict_put_bool(qdict, key, true);
-                     }

debian/patches/extra/0002-scsi-megasas-Internal-cdbs-have-16-byte-length.patch

@@ -0,0 +1,69 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Guenter Roeck <linux@roeck-us.net>
+Date: Tue, 28 Feb 2023 09:11:29 -0800
+Subject: [PATCH] scsi: megasas: Internal cdbs have 16-byte length
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Host drivers do not necessarily set cdb_len in megasas io commands.
+With commits 6d1511cea0 ("scsi: Reject commands if the CDB length
+exceeds buf_len") and fe9d8927e2 ("scsi: Add buf_len parameter to
+scsi_req_new()"), this results in failures to boot Linux from affected
+SCSI drives because cdb_len is set to 0 by the host driver.
+Set the cdb length to its actual size to solve the problem.
+
+Signed-off-by: Guenter Roeck <linux@roeck-us.net>
+Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
+(picked-up from https://lists.nongnu.org/archive/html/qemu-devel/2023-02/msg08653.html)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/scsi/megasas.c | 14 ++------------
+ 1 file changed, 2 insertions(+), 12 deletions(-)
+
+diff --git a/hw/scsi/megasas.c b/hw/scsi/megasas.c
+index 9cbbb16121..d624866bb6 100644
+--- a/hw/scsi/megasas.c
++++ b/hw/scsi/megasas.c
+@@ -1780,7 +1780,7 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+     uint8_t cdb[16];
+     int len;
+     struct SCSIDevice *sdev = NULL;
+-    int target_id, lun_id, cdb_len;
++    int target_id, lun_id;
+ 
+     lba_count = le32_to_cpu(cmd->frame->io.header.data_len);
+     lba_start_lo = le32_to_cpu(cmd->frame->io.lba_lo);
+@@ -1789,7 +1789,6 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+ 
+     target_id = cmd->frame->header.target_id;
+     lun_id = cmd->frame->header.lun_id;
+-    cdb_len = cmd->frame->header.cdb_len;
+ 
+     if (target_id < MFI_MAX_LD && lun_id == 0) {
+         sdev = scsi_device_find(&s->bus, 0, target_id, lun_id);
+@@ -1804,15 +1803,6 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+         return MFI_STAT_DEVICE_NOT_FOUND;
+     }
+ 
+-    if (cdb_len > 16) {
+-        trace_megasas_scsi_invalid_cdb_len(
+-            mfi_frame_desc(frame_cmd), 1, target_id, lun_id, cdb_len);
+-        megasas_write_sense(cmd, SENSE_CODE(INVALID_OPCODE));
+-        cmd->frame->header.scsi_status = CHECK_CONDITION;
+-        s->event_count++;
+-        return MFI_STAT_SCSI_DONE_WITH_ERROR;
+-    }
+-
+     cmd->iov_size = lba_count * sdev->blocksize;
+     if (megasas_map_sgl(s, cmd, &cmd->frame->io.sgl)) {
+         megasas_write_sense(cmd, SENSE_CODE(TARGET_FAILURE));
+@@ -1823,7 +1813,7 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+ 
+     megasas_encode_lba(cdb, lba_start, lba_count, is_write);
+     cmd->req = scsi_req_new(sdev, cmd->index,
+-                            lun_id, cdb, cdb_len, cmd);
++                            lun_id, cdb, sizeof(cdb), cmd);
+     if (!cmd->req) {
+         trace_megasas_scsi_req_alloc_failed(
+             mfi_frame_desc(frame_cmd), target_id, lun_id);

debian/patches/extra/0003-ide-avoid-potential-deadlock-when-draining-during-tr.patch

@@ -0,0 +1,100 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Tue, 7 Mar 2023 15:03:02 +0100
+Subject: [PATCH] ide: avoid potential deadlock when draining during trim
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The deadlock can happen as follows:
+1. ide_issue_trim is called, and increments the in_flight counter.
+2. ide_issue_trim_cb calls blk_aio_pdiscard.
+3. Somebody else starts draining (e.g. backup to insert the cbw node).
+4. ide_issue_trim_cb is called as the completion callback for
+   blk_aio_pdiscard.
+5. ide_issue_trim_cb issues yet another blk_aio_pdiscard request.
+6. The request is added to the wait queue via blk_wait_while_drained,
+   because draining has been started.
+7. Nobody ever decrements the in_flight counter and draining can't
+   finish. This would be done by ide_trim_bh_cb, which is called after
+   ide_issue_trim_cb has issued its last request, but
+   ide_issue_trim_cb is not called anymore, because it's the
+   completion callback of blk_aio_pdiscard, which waits on draining.
+
+Quoting Hanna Czenczek:
+> The point of 7e5cdb345f was that we need any in-flight count to
+> accompany a set s->bus->dma->aiocb. While blk_aio_pdiscard() is
+> happening, we don’t necessarily need another count. But we do need
+> it while there is no blk_aio_pdiscard().
+> ide_issue_trim_cb() returns in two cases (and, recursively through
+> its callers, leaves s->bus->dma->aiocb set):
+> 1. After calling blk_aio_pdiscard(), which will keep an in-flight
+>    count,
+> 2. After calling replay_bh_schedule_event() (i.e.
+>    qemu_bh_schedule()), which does not keep an in-flight count.
+
+Thus, even after moving the blk_inc_in_flight to above the
+replay_bh_schedule_event call, the invariant "ide_issue_trim_cb
+returns with an accompanying in-flight count" is still satisfied.
+
+However, the issue 7e5cdb345f fixed for canceling resurfaces, because
+ide_cancel_dma_sync assumes that it just needs to drain once. But now
+the in_flight count is not consistently > 0 during the trim operation.
+So, change it to drain until !s->bus->dma->aiocb, which means that the
+operation finished (s->bus->dma->aiocb is cleared by ide_set_inactive
+via the ide_dma_cb when the end of the transfer is reached).
+
+Discussion here:
+https://lists.nongnu.org/archive/html/qemu-devel/2023-03/msg02506.html
+
+Fixes: 7e5cdb345f ("ide: Increment BB in-flight counter for TRIM BH")
+Suggested-by: Hanna Czenczek <hreitz@redhat.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/ide/core.c | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/hw/ide/core.c b/hw/ide/core.c
+index 45d14a25e9..08e1f0c3d7 100644
+--- a/hw/ide/core.c
++++ b/hw/ide/core.c
+@@ -444,7 +444,7 @@ static void ide_trim_bh_cb(void *opaque)
+     iocb->bh = NULL;
+     qemu_aio_unref(iocb);
+ 
+-    /* Paired with an increment in ide_issue_trim() */
++    /* Paired with an increment in ide_issue_trim_cb() */
+     blk_dec_in_flight(blk);
+ }
+ 
+@@ -504,6 +504,8 @@ static void ide_issue_trim_cb(void *opaque, int ret)
+ done:
+     iocb->aiocb = NULL;
+     if (iocb->bh) {
++        /* Paired with a decrement in ide_trim_bh_cb() */
++        blk_inc_in_flight(s->blk);
+         replay_bh_schedule_event(iocb->bh);
+     }
+ }
+@@ -515,9 +517,6 @@ BlockAIOCB *ide_issue_trim(
+     IDEState *s = opaque;
+     TrimAIOCB *iocb;
+ 
+-    /* Paired with a decrement in ide_trim_bh_cb() */
+-    blk_inc_in_flight(s->blk);
+-
+     iocb = blk_aio_get(&trim_aiocb_info, s->blk, cb, cb_opaque);
+     iocb->s = s;
+     iocb->bh = qemu_bh_new(ide_trim_bh_cb, iocb);
+@@ -740,8 +739,9 @@ void ide_cancel_dma_sync(IDEState *s)
+      */
+     if (s->bus->dma->aiocb) {
+         trace_ide_cancel_dma_sync_remaining();
+-        blk_drain(s->blk);
+-        assert(s->bus->dma->aiocb == NULL);
++        while (s->bus->dma->aiocb) {
++            blk_drain(s->blk);
++        }
+     }
+ }
+ 

debian/patches/extra/0003-monitor-refactor-set-expire_password-and-allow-VNC-d.patch

@@ -1,477 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 25 Aug 2021 11:14:13 +0200
-Subject: [PATCH] monitor: refactor set/expire_password and allow VNC display
- id
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It is possible to specify more than one VNC server on the command line,
-either with an explicit ID or the auto-generated ones à la "default",
-"vnc2", "vnc3", ...
-
-It is not possible to change the password on one of these extra VNC
-displays though. Fix this by adding a "display" parameter to the
-"set_password" and "expire_password" QMP and HMP commands.
-
-For HMP, the display is specified using the "-d" value flag.
-
-For QMP, the schema is updated to explicitly express the supported
-variants of the commands with protocol-discriminated unions.
-
-Suggested-by: Eric Blake <eblake@redhat.com>
-Suggested-by: Markus Armbruster <armbru@redhat.com>
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
----
- hmp-commands.hx    |  24 ++++---
- monitor/hmp-cmds.c |  57 +++++++++++++++-
- monitor/qmp-cmds.c |  62 ++++++-----------
- qapi/ui.json       | 165 ++++++++++++++++++++++++++++++++++++++-------
- 4 files changed, 231 insertions(+), 77 deletions(-)
-
-diff --git a/hmp-commands.hx b/hmp-commands.hx
-index 70a9136ac2..5efb47fc32 100644
---- a/hmp-commands.hx
-+++ b/hmp-commands.hx
-@@ -1514,33 +1514,35 @@ ERST
- 
-     {
-         .name       = "set_password",
--        .args_type  = "protocol:s,password:s,connected:s?",
--        .params     = "protocol password action-if-connected",
-+        .args_type  = "protocol:s,password:s,display:-dS,connected:s?",
-+        .params     = "protocol password [-d display] [action-if-connected]",
-         .help       = "set spice/vnc password",
-         .cmd        = hmp_set_password,
-     },
- 
- SRST
--``set_password [ vnc | spice ] password [ action-if-connected ]``
--  Change spice/vnc password.  *action-if-connected* specifies what
--  should happen in case a connection is established: *fail* makes the
--  password change fail.  *disconnect* changes the password and
-+``set_password [ vnc | spice ] password [ -d display ] [ action-if-connected ]``
-+  Change spice/vnc password.  *display* can be used with 'vnc' to specify
-+  which display to set the password on.  *action-if-connected* specifies
-+  what should happen in case a connection is established: *fail* makes
-+  the password change fail.  *disconnect* changes the password and
-   disconnects the client.  *keep* changes the password and keeps the
-   connection up.  *keep* is the default.
- ERST
- 
-     {
-         .name       = "expire_password",
--        .args_type  = "protocol:s,time:s",
--        .params     = "protocol time",
-+        .args_type  = "protocol:s,time:s,display:-dS",
-+        .params     = "protocol time [-d display]",
-         .help       = "set spice/vnc password expire-time",
-         .cmd        = hmp_expire_password,
-     },
- 
- SRST
--``expire_password [ vnc | spice ]`` *expire-time*
--  Specify when a password for spice/vnc becomes
--  invalid. *expire-time* accepts:
-+``expire_password [ vnc | spice ] expire-time [ -d display ]``
-+  Specify when a password for spice/vnc becomes invalid.
-+  *display* behaves the same as in ``set_password``.
-+  *expire-time* accepts:
- 
-   ``now``
-     Invalidate password instantly.
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index 9c91bf93e9..2e91ccb738 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -1384,10 +1384,41 @@ void hmp_set_password(Monitor *mon, const QDict *qdict)
- {
-     const char *protocol  = qdict_get_str(qdict, "protocol");
-     const char *password  = qdict_get_str(qdict, "password");
-+    const char *display = qdict_get_try_str(qdict, "display");
-     const char *connected = qdict_get_try_str(qdict, "connected");
-     Error *err = NULL;
-+    DisplayProtocol proto;
- 
--    qmp_set_password(protocol, password, !!connected, connected, &err);
-+    SetPasswordOptions opts = {
-+        .password = g_strdup(password),
-+        .u.vnc.display = NULL,
-+    };
-+
-+    proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
-+                            DISPLAY_PROTOCOL_VNC, &err);
-+    if (err) {
-+        hmp_handle_error(mon, err);
-+        return;
-+    }
-+    opts.protocol = proto;
-+
-+    if (proto == DISPLAY_PROTOCOL_VNC) {
-+        opts.u.vnc.has_display = !!display;
-+        opts.u.vnc.display = g_strdup(display);
-+    } else if (proto == DISPLAY_PROTOCOL_SPICE) {
-+        opts.u.spice.has_connected = !!connected;
-+        opts.u.spice.connected =
-+            qapi_enum_parse(&SetPasswordAction_lookup, connected,
-+                            SET_PASSWORD_ACTION_KEEP, &err);
-+        if (err) {
-+            hmp_handle_error(mon, err);
-+            return;
-+        }
-+    }
-+
-+    qmp_set_password(&opts, &err);
-+    g_free(opts.password);
-+    g_free(opts.u.vnc.display);
-     hmp_handle_error(mon, err);
- }
- 
-@@ -1395,9 +1426,31 @@ void hmp_expire_password(Monitor *mon, const QDict *qdict)
- {
-     const char *protocol  = qdict_get_str(qdict, "protocol");
-     const char *whenstr = qdict_get_str(qdict, "time");
-+    const char *display = qdict_get_try_str(qdict, "display");
-     Error *err = NULL;
-+    DisplayProtocol proto;
- 
--    qmp_expire_password(protocol, whenstr, &err);
-+    ExpirePasswordOptions opts = {
-+        .time = g_strdup(whenstr),
-+        .u.vnc.display = NULL,
-+    };
-+
-+    proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
-+                            DISPLAY_PROTOCOL_VNC, &err);
-+    if (err) {
-+        hmp_handle_error(mon, err);
-+        return;
-+    }
-+    opts.protocol = proto;
-+
-+    if (proto == DISPLAY_PROTOCOL_VNC) {
-+        opts.u.vnc.has_display = !!display;
-+        opts.u.vnc.display = g_strdup(display);
-+    }
-+
-+    qmp_expire_password(&opts, &err);
-+    g_free(opts.time);
-+    g_free(opts.u.vnc.display);
-     hmp_handle_error(mon, err);
- }
- 
-diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
-index 343353e27a..729ca7cceb 100644
---- a/monitor/qmp-cmds.c
-+++ b/monitor/qmp-cmds.c
-@@ -167,45 +167,30 @@ void qmp_system_wakeup(Error **errp)
-     qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, errp);
- }
- 
--void qmp_set_password(const char *protocol, const char *password,
--                      bool has_connected, const char *connected, Error **errp)
-+void qmp_set_password(SetPasswordOptions *opts, Error **errp)
- {
--    int disconnect_if_connected = 0;
--    int fail_if_connected = 0;
--    int rc;
-+    bool disconnect_if_connected = false;
-+    bool fail_if_connected = false;
-+    int rc = 0;
- 
--    if (has_connected) {
--        if (strcmp(connected, "fail") == 0) {
--            fail_if_connected = 1;
--        } else if (strcmp(connected, "disconnect") == 0) {
--            disconnect_if_connected = 1;
--        } else if (strcmp(connected, "keep") == 0) {
--            /* nothing */
--        } else {
--            error_setg(errp, QERR_INVALID_PARAMETER, "connected");
--            return;
--        }
--    }
--
--    if (strcmp(protocol, "spice") == 0) {
-+    if (opts->protocol == DISPLAY_PROTOCOL_SPICE) {
-         if (!qemu_using_spice(errp)) {
-             return;
-         }
--        rc = qemu_spice.set_passwd(password, fail_if_connected,
-+        if (opts->u.spice.has_connected) {
-+            fail_if_connected =
-+                opts->u.spice.connected == SET_PASSWORD_ACTION_FAIL;
-+            disconnect_if_connected =
-+                opts->u.spice.connected == SET_PASSWORD_ACTION_DISCONNECT;
-+        }
-+        rc = qemu_spice.set_passwd(opts->password, fail_if_connected,
-                                    disconnect_if_connected);
--    } else if (strcmp(protocol, "vnc") == 0) {
--        if (fail_if_connected || disconnect_if_connected) {
--            /* vnc supports "connected=keep" only */
--            error_setg(errp, QERR_INVALID_PARAMETER, "connected");
--            return;
--        }
-+    } else if (opts->protocol == DISPLAY_PROTOCOL_VNC) {
-         /* Note that setting an empty password will not disable login through
-          * this interface. */
--        rc = vnc_display_password(NULL, password);
--    } else {
--        error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "protocol",
--                   "'vnc' or 'spice'");
--        return;
-+        rc = vnc_display_password(
-+                opts->u.vnc.has_display ? opts->u.vnc.display : NULL,
-+                opts->password);
-     }
- 
-     if (rc != 0) {
-@@ -213,11 +198,11 @@ void qmp_set_password(const char *protocol, const char *password,
-     }
- }
- 
--void qmp_expire_password(const char *protocol, const char *whenstr,
--                         Error **errp)
-+void qmp_expire_password(ExpirePasswordOptions *opts, Error **errp)
- {
-     time_t when;
-     int rc;
-+    const char* whenstr = opts->time;
- 
-     if (strcmp(whenstr, "now") == 0) {
-         when = 0;
-@@ -229,17 +214,14 @@ void qmp_expire_password(const char *protocol, const char *whenstr,
-         when = strtoull(whenstr, NULL, 10);
-     }
- 
--    if (strcmp(protocol, "spice") == 0) {
-+    if (opts->protocol == DISPLAY_PROTOCOL_SPICE) {
-         if (!qemu_using_spice(errp)) {
-             return;
-         }
-         rc = qemu_spice.set_pw_expire(when);
--    } else if (strcmp(protocol, "vnc") == 0) {
--        rc = vnc_display_pw_expire(NULL, when);
--    } else {
--        error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "protocol",
--                   "'vnc' or 'spice'");
--        return;
-+    } else if (opts->protocol == DISPLAY_PROTOCOL_VNC) {
-+        rc = vnc_display_pw_expire(
-+                opts->u.vnc.has_display ? opts->u.vnc.display : NULL, when);
-     }
- 
-     if (rc != 0) {
-diff --git a/qapi/ui.json b/qapi/ui.json
-index d7567ac866..4244c62c30 100644
---- a/qapi/ui.json
-+++ b/qapi/ui.json
-@@ -9,22 +9,23 @@
- { 'include': 'common.json' }
- { 'include': 'sockets.json' }
- 
-+##
-+# @DisplayProtocol:
-+#
-+# Display protocols which support changing password options.
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'enum': 'DisplayProtocol',
-+  'data': [ { 'name': 'vnc', 'if': 'CONFIG_VNC' },
-+            { 'name': 'spice', 'if': 'CONFIG_SPICE' } ] }
-+
- ##
- # @set_password:
- #
- # Sets the password of a remote display session.
- #
--# @protocol: - 'vnc' to modify the VNC server password
--#            - 'spice' to modify the Spice server password
--#
--# @password: the new password
--#
--# @connected: how to handle existing clients when changing the
--#             password.  If nothing is specified, defaults to 'keep'
--#             'fail' to fail the command if clients are connected
--#             'disconnect' to disconnect existing clients
--#             'keep' to maintain existing clients
--#
- # Returns: - Nothing on success
- #          - If Spice is not enabled, DeviceNotFound
- #
-@@ -37,16 +38,123 @@
- # <- { "return": {} }
- #
- ##
--{ 'command': 'set_password',
--  'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
-+{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' }
-+
-+##
-+# @SetPasswordOptions:
-+#
-+# Data required to set a new password on a display server protocol.
-+#
-+# @protocol: - 'vnc' to modify the VNC server password
-+#            - 'spice' to modify the Spice server password
-+#
-+# @password: the new password
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'union': 'SetPasswordOptions',
-+  'base': { 'protocol': 'DisplayProtocol',
-+            'password': 'str' },
-+  'discriminator': 'protocol',
-+  'data': { 'vnc': 'SetPasswordOptionsVnc',
-+            'spice': 'SetPasswordOptionsSpice' } }
-+
-+##
-+# @SetPasswordAction:
-+#
-+# An action to take on changing a password on a connection with active clients.
-+#
-+# @fail: fail the command if clients are connected
-+#
-+# @disconnect: disconnect existing clients
-+#
-+# @keep: maintain existing clients
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'enum': 'SetPasswordAction',
-+  'data': [ 'fail', 'disconnect', 'keep' ] }
-+
-+##
-+# @SetPasswordActionVnc:
-+#
-+# See @SetPasswordAction. VNC only supports the keep action. 'connection'
-+# should just be omitted for VNC, this is kept for backwards compatibility.
-+#
-+# @keep: maintain existing clients
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'enum': 'SetPasswordActionVnc',
-+  'data': [ 'keep' ] }
-+
-+##
-+# @SetPasswordOptionsSpice:
-+#
-+# Options for set_password specific to the VNC procotol.
-+#
-+# @connected: How to handle existing clients when changing the
-+#             password. If nothing is specified, defaults to 'keep'.
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'struct': 'SetPasswordOptionsSpice',
-+  'data': { '*connected': 'SetPasswordAction' } }
-+
-+##
-+# @SetPasswordOptionsVnc:
-+#
-+# Options for set_password specific to the VNC procotol.
-+#
-+# @display: The id of the display where the password should be changed.
-+#           Defaults to the first.
-+#
-+# @connected: How to handle existing clients when changing the
-+#             password.
-+#
-+# Features:
-+# @deprecated: For VNC, @connected will always be 'keep', parameter should be
-+#              omitted.
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'struct': 'SetPasswordOptionsVnc',
-+  'data': { '*display': 'str',
-+            '*connected': { 'type': 'SetPasswordActionVnc',
-+                            'features': ['deprecated'] } } }
- 
- ##
- # @expire_password:
- #
- # Expire the password of a remote display server.
- #
--# @protocol: the name of the remote display protocol 'vnc' or 'spice'
-+# Returns: - Nothing on success
-+#          - If @protocol is 'spice' and Spice is not active, DeviceNotFound
- #
-+# Since: 0.14
-+#
-+# Example:
-+#
-+# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
-+#                                                   "time": "+60" } }
-+# <- { "return": {} }
-+#
-+##
-+{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' }
-+
-+##
-+# @ExpirePasswordOptions:
-+#
-+# Data required to set password expiration on a display server protocol.
-+#
-+# @protocol: - 'vnc' to modify the VNC server expiration
-+#            - 'spice' to modify the Spice server expiration
-+
- # @time: when to expire the password.
- #
- #        - 'now' to expire the password immediately
-@@ -54,24 +162,33 @@
- #        - '+INT' where INT is the number of seconds from now (integer)
- #        - 'INT' where INT is the absolute time in seconds
- #
--# Returns: - Nothing on success
--#          - If @protocol is 'spice' and Spice is not active, DeviceNotFound
--#
--# Since: 0.14
--#
- # Notes: Time is relative to the server and currently there is no way to
- #        coordinate server time with client time.  It is not recommended to
- #        use the absolute time version of the @time parameter unless you're
- #        sure you are on the same machine as the QEMU instance.
- #
--# Example:
-+# Since: 6.2
- #
--# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
--#                                                   "time": "+60" } }
--# <- { "return": {} }
-+##
-+{ 'union': 'ExpirePasswordOptions',
-+  'base': { 'protocol': 'DisplayProtocol',
-+            'time': 'str' },
-+  'discriminator': 'protocol',
-+  'data': { 'vnc': 'ExpirePasswordOptionsVnc' } }
-+
-+##
-+# @ExpirePasswordOptionsVnc:
-+#
-+# Options for expire_password specific to the VNC procotol.
-+#
-+# @display: The id of the display where the expiration should be changed.
-+#           Defaults to the first.
-+#
-+# Since: 6.2
- #
- ##
--{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
-+{ 'struct': 'ExpirePasswordOptionsVnc',
-+  'data': { '*display': 'str' } }
- 
- ##
- # @screendump:

debian/patches/extra/0004-ui-return-NULL-when-getting-cursor-without-a-console.patch

@@ -0,0 +1,36 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marc-Andr=C3=A9=20Lureau?= <marcandre.lureau@redhat.com>
+Date: Fri, 28 Apr 2023 19:48:06 +0400
+Subject: [PATCH] ui: return NULL when getting cursor without a console
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+VNC may try to get the current cursor even when there are no consoles
+and crashes. Simple reproducer is qemu with -nodefaults.
+
+Fixes: (again)
+https://gitlab.com/qemu-project/qemu/-/issues/1548
+
+Fixes: commit 385ac97f8 ("ui: keep current cursor with QemuConsole")
+Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
+Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
+(picked up from https://lists.nongnu.org/archive/html/qemu-devel/2023-04/msg05598.html)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ ui/console.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/ui/console.c b/ui/console.c
+index e173731e20..7461446e71 100644
+--- a/ui/console.c
++++ b/ui/console.c
+@@ -2306,7 +2306,7 @@ QEMUCursor *qemu_console_get_cursor(QemuConsole *con)
+     if (con == NULL) {
+         con = active_console;
+     }
+-    return con->cursor;
++    return con ? con->cursor : NULL;
+ }
+ 
+ bool qemu_console_is_visible(QemuConsole *con)

debian/patches/extra/0005-memory-prevent-dma-reentracy-issues.patch

@@ -0,0 +1,130 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Alexander Bulekov <alxndr@bu.edu>
+Date: Thu, 27 Apr 2023 17:10:06 -0400
+Subject: [PATCH] memory: prevent dma-reentracy issues
+
+Add a flag to the DeviceState, when a device is engaged in PIO/MMIO/DMA.
+This flag is set/checked prior to calling a device's MemoryRegion
+handlers, and set when device code initiates DMA.  The purpose of this
+flag is to prevent two types of DMA-based reentrancy issues:
+
+1.) mmio -> dma -> mmio case
+2.) bh -> dma write -> mmio case
+
+These issues have led to problems such as stack-exhaustion and
+use-after-frees.
+
+Summary of the problem from Peter Maydell:
+https://lore.kernel.org/qemu-devel/CAFEAcA_23vc7hE3iaM-JVA6W38LK4hJoWae5KcknhPRD5fPBZA@mail.gmail.com
+
+Resolves: https://gitlab.com/qemu-project/qemu/-/issues/62
+Resolves: https://gitlab.com/qemu-project/qemu/-/issues/540
+Resolves: https://gitlab.com/qemu-project/qemu/-/issues/541
+Resolves: https://gitlab.com/qemu-project/qemu/-/issues/556
+Resolves: https://gitlab.com/qemu-project/qemu/-/issues/557
+Resolves: https://gitlab.com/qemu-project/qemu/-/issues/827
+Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1282
+Resolves: CVE-2023-0330
+
+Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
+Reviewed-by: Thomas Huth <thuth@redhat.com>
+Message-Id: <20230427211013.2994127-2-alxndr@bu.edu>
+[thuth: Replace warn_report() with warn_report_once()]
+Signed-off-by: Thomas Huth <thuth@redhat.com>
+(cherry-picked from commit a2e1753b8054344f32cf94f31c6399a58794a380)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ include/exec/memory.h  |  5 +++++
+ include/hw/qdev-core.h |  7 +++++++
+ softmmu/memory.c       | 16 ++++++++++++++++
+ 3 files changed, 28 insertions(+)
+
+diff --git a/include/exec/memory.h b/include/exec/memory.h
+index 15ade918ba..e45ce6061f 100644
+--- a/include/exec/memory.h
++++ b/include/exec/memory.h
+@@ -767,6 +767,8 @@ struct MemoryRegion {
+     bool is_iommu;
+     RAMBlock *ram_block;
+     Object *owner;
++    /* owner as TYPE_DEVICE. Used for re-entrancy checks in MR access hotpath */
++    DeviceState *dev;
+ 
+     const MemoryRegionOps *ops;
+     void *opaque;
+@@ -791,6 +793,9 @@ struct MemoryRegion {
+     unsigned ioeventfd_nb;
+     MemoryRegionIoeventfd *ioeventfds;
+     RamDiscardManager *rdm; /* Only for RAM */
++
++    /* For devices designed to perform re-entrant IO into their own IO MRs */
++    bool disable_reentrancy_guard;
+ };
+ 
+ struct IOMMUMemoryRegion {
+diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
+index bd50ad5ee1..7623703943 100644
+--- a/include/hw/qdev-core.h
++++ b/include/hw/qdev-core.h
+@@ -162,6 +162,10 @@ struct NamedClockList {
+     QLIST_ENTRY(NamedClockList) node;
+ };
+ 
++typedef struct {
++    bool engaged_in_io;
++} MemReentrancyGuard;
++
+ /**
+  * DeviceState:
+  * @realized: Indicates whether the device has been fully constructed.
+@@ -194,6 +198,9 @@ struct DeviceState {
+     int alias_required_for_version;
+     ResettableState reset;
+     GSList *unplug_blockers;
++
++    /* Is the device currently in mmio/pio/dma? Used to prevent re-entrancy */
++    MemReentrancyGuard mem_reentrancy_guard;
+ };
+ 
+ struct DeviceListener {
+diff --git a/softmmu/memory.c b/softmmu/memory.c
+index b1a6cae6f5..b7b3386e9d 100644
+--- a/softmmu/memory.c
++++ b/softmmu/memory.c
+@@ -542,6 +542,18 @@ static MemTxResult access_with_adjusted_size(hwaddr addr,
+         access_size_max = 4;
+     }
+ 
++    /* Do not allow more than one simultaneous access to a device's IO Regions */
++    if (mr->dev && !mr->disable_reentrancy_guard &&
++        !mr->ram_device && !mr->ram && !mr->rom_device && !mr->readonly) {
++        if (mr->dev->mem_reentrancy_guard.engaged_in_io) {
++            warn_report_once("Blocked re-entrant IO on MemoryRegion: "
++                             "%s at addr: 0x%" HWADDR_PRIX,
++                             memory_region_name(mr), addr);
++            return MEMTX_ACCESS_ERROR;
++        }
++        mr->dev->mem_reentrancy_guard.engaged_in_io = true;
++    }
++
+     /* FIXME: support unaligned access? */
+     access_size = MAX(MIN(size, access_size_max), access_size_min);
+     access_mask = MAKE_64BIT_MASK(0, access_size * 8);
+@@ -556,6 +568,9 @@ static MemTxResult access_with_adjusted_size(hwaddr addr,
+                         access_mask, attrs);
+         }
+     }
++    if (mr->dev) {
++        mr->dev->mem_reentrancy_guard.engaged_in_io = false;
++    }
+     return r;
+ }
+ 
+@@ -1170,6 +1185,7 @@ static void memory_region_do_init(MemoryRegion *mr,
+     }
+     mr->name = g_strdup(name);
+     mr->owner = owner;
++    mr->dev = (DeviceState *) object_dynamic_cast(mr->owner, TYPE_DEVICE);
+     mr->ram_block = NULL;
+ 
+     if (name) {

debian/patches/extra/0006-block-io-Update-BSC-only-if-want_zero-is-true.patch

@@ -1,43 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Hanna Reitz <hreitz@redhat.com>
-Date: Tue, 18 Jan 2022 17:59:59 +0100
-Subject: [PATCH] block/io: Update BSC only if want_zero is true
-
-We update the block-status cache whenever we get new information from a
-bdrv_co_block_status() call to the block driver.  However, if we have
-passed want_zero=false to that call, it may flag areas containing zeroes
-as data, and so we would update the block-status cache with wrong
-information.
-
-Therefore, we should not update the cache with want_zero=false.
-
-Reported-by: Nir Soffer <nsoffer@redhat.com>
-Fixes: 0bc329fbb00 ("block: block-status cache for data regions")
-Reviewed-by: Nir Soffer <nsoffer@redhat.com>
-Cc: qemu-stable@nongnu.org
-Signed-off-by: Hanna Reitz <hreitz@redhat.com>
-Message-Id: <20220118170000.49423-2-hreitz@redhat.com>
-Reviewed-by: Eric Blake <eblake@redhat.com>
-Signed-off-by: Eric Blake <eblake@redhat.com>
----
- block/io.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
-diff --git a/block/io.c b/block/io.c
-index bb0a254def..4e4cb556c5 100644
---- a/block/io.c
-+++ b/block/io.c
-@@ -2497,8 +2497,12 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
-              * non-protocol nodes, and then it is never used.  However, filling
-              * the cache requires an RCU update, so double check here to avoid
-              * such an update if possible.
-+             *
-+             * Check want_zero, because we only want to update the cache when we
-+             * have accurate information about what is zero and what is data.
-              */
--            if (ret == (BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID) &&
-+            if (want_zero &&
-+                ret == (BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID) &&
-                 QLIST_EMPTY(&bs->children))
-             {
-                 /*

debian/patches/extra/0006-lsi53c895a-disable-reentrancy-detection-for-script-R.patch

@@ -0,0 +1,39 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Alexander Bulekov <alxndr@bu.edu>
+Date: Thu, 27 Apr 2023 17:10:10 -0400
+Subject: [PATCH] lsi53c895a: disable reentrancy detection for script RAM
+
+As the code is designed to use the memory APIs to access the script ram,
+disable reentrancy checks for the pseudo-RAM ram_io MemoryRegion.
+
+In the future, ram_io may be converted from an IO to a proper RAM MemoryRegion.
+
+Reported-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
+Reviewed-by: Thomas Huth <thuth@redhat.com>
+Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
+Message-Id: <20230427211013.2994127-6-alxndr@bu.edu>
+Signed-off-by: Thomas Huth <thuth@redhat.com>
+(cherry-picked from commit bfd6e7ae6a72b84e2eb9574f56e6ec037f05182c)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/scsi/lsi53c895a.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/hw/scsi/lsi53c895a.c b/hw/scsi/lsi53c895a.c
+index bbf32d3f73..17af67935f 100644
+--- a/hw/scsi/lsi53c895a.c
++++ b/hw/scsi/lsi53c895a.c
+@@ -2313,6 +2313,12 @@ static void lsi_scsi_realize(PCIDevice *dev, Error **errp)
+     memory_region_init_io(&s->io_io, OBJECT(s), &lsi_io_ops, s,
+                           "lsi-io", 256);
+ 
++    /*
++     * Since we use the address-space API to interact with ram_io, disable the
++     * re-entrancy guard.
++     */
++    s->ram_io.disable_reentrancy_guard = true;
++
+     address_space_init(&s->pci_io_as, pci_address_space_io(dev), "lsi-pci-io");
+     qdev_init_gpio_out(d, &s->ext_irq, 1);
+ 

debian/patches/extra/0007-bcm2835_property-disable-reentrancy-detection-for-io.patch

@@ -0,0 +1,37 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Alexander Bulekov <alxndr@bu.edu>
+Date: Thu, 27 Apr 2023 17:10:11 -0400
+Subject: [PATCH] bcm2835_property: disable reentrancy detection for iomem
+
+As the code is designed for re-entrant calls from bcm2835_property to
+bcm2835_mbox and back into bcm2835_property, mark iomem as
+reentrancy-safe.
+
+Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
+Reviewed-by: Thomas Huth <thuth@redhat.com>
+Message-Id: <20230427211013.2994127-7-alxndr@bu.edu>
+Signed-off-by: Thomas Huth <thuth@redhat.com>
+(cherry-picked from commit 985c4a4e547afb9573b6bd6843d20eb2c3d1d1cd)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/misc/bcm2835_property.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
+index 890ae7bae5..de056ea2df 100644
+--- a/hw/misc/bcm2835_property.c
++++ b/hw/misc/bcm2835_property.c
+@@ -382,6 +382,13 @@ static void bcm2835_property_init(Object *obj)
+ 
+     memory_region_init_io(&s->iomem, OBJECT(s), &bcm2835_property_ops, s,
+                           TYPE_BCM2835_PROPERTY, 0x10);
++
++    /*
++     * bcm2835_property_ops call into bcm2835_mbox, which in-turn reads from
++     * iomem. As such, mark iomem as re-entracy safe.
++     */
++    s->iomem.disable_reentrancy_guard = true;
++
+     sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+     sysbus_init_irq(SYS_BUS_DEVICE(s), &s->mbox_irq);
+ }

debian/patches/extra/0007-block-nbd-Delete-reconnect-delay-timer-when-done.patch

@@ -1,40 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Hanna Reitz <hreitz@redhat.com>
-Date: Wed, 9 Feb 2022 15:02:52 +0100
-Subject: [PATCH] block/nbd: Delete reconnect delay timer when done
-
-We start the reconnect delay timer to cancel the reconnection attempt
-after a while.  Once nbd_co_do_establish_connection() has returned, this
-attempt is over, and we no longer need the timer.
-
-Delete it before returning from nbd_reconnect_attempt(), so that it does
-not persist beyond the I/O request that was paused for reconnecting; we
-do not want it to fire in a drained section, because all sort of things
-can happen in such a section (e.g. the AioContext might be changed, and
-we do not want the timer to fire in the wrong context; or the BDS might
-even be deleted, and so the timer CB would access already-freed data).
-
-Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
-Signed-off-by: Hanna Reitz <hreitz@redhat.com>
----
- block/nbd.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/block/nbd.c b/block/nbd.c
-index 5ef462db1b..b8e5a9b4cc 100644
---- a/block/nbd.c
-+++ b/block/nbd.c
-@@ -353,6 +353,13 @@ static coroutine_fn void nbd_reconnect_attempt(BDRVNBDState *s)
-     }
- 
-     nbd_co_do_establish_connection(s->bs, NULL);
-+
-+    /*
-+     * The reconnect attempt is done (maybe successfully, maybe not), so
-+     * we no longer need this timer.  Delete it so it will not outlive
-+     * this I/O request (so draining removes all timers).
-+     */
-+    reconnect_delay_timer_del(s);
- }
- 
- static coroutine_fn int nbd_receive_replies(BDRVNBDState *s, uint64_t handle)

debian/patches/extra/0008-block-nbd-Assert-there-are-no-timers-when-closed.patch

@@ -1,34 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Hanna Reitz <hreitz@redhat.com>
-Date: Wed, 9 Feb 2022 15:02:54 +0100
-Subject: [PATCH] block/nbd: Assert there are no timers when closed
-
-Our two timers must not remain armed beyond nbd_clear_bdrvstate(), or
-they will access freed data when they fire.
-
-This patch is separate from the patches that actually fix the issue
-(HEAD^^ and HEAD^) so that you can run the associated regression iotest
-(281) on a configuration that reproducibly exposes the bug.
-
-Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
-Signed-off-by: Hanna Reitz <hreitz@redhat.com>
-[FE: backport (open_timer doesn't exist yet in 6.2.0)]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
----
- block/nbd.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/block/nbd.c b/block/nbd.c
-index b8e5a9b4cc..aab20125d8 100644
---- a/block/nbd.c
-+++ b/block/nbd.c
-@@ -108,6 +108,9 @@ static void nbd_clear_bdrvstate(BlockDriverState *bs)
- 
-     yank_unregister_instance(BLOCKDEV_YANK_INSTANCE(bs->node_name));
- 
-+    /* Must not leave timers behind that would access freed data */
-+    assert(!s->reconnect_delay_timer);
-+
-     object_unref(OBJECT(s->tlscreds));
-     qapi_free_SocketAddress(s->saddr);
-     s->saddr = NULL;

debian/patches/extra/0008-raven-disable-reentrancy-detection-for-iomem.patch

@@ -0,0 +1,35 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Alexander Bulekov <alxndr@bu.edu>
+Date: Thu, 27 Apr 2023 17:10:12 -0400
+Subject: [PATCH] raven: disable reentrancy detection for iomem
+
+As the code is designed for re-entrant calls from raven_io_ops to
+pci-conf, mark raven_io_ops as reentrancy-safe.
+
+Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
+Message-Id: <20230427211013.2994127-8-alxndr@bu.edu>
+Signed-off-by: Thomas Huth <thuth@redhat.com>
+(cherry-picked from commit 6dad5a6810d9c60ca320d01276f6133bbcfa1fc7)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/pci-host/raven.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c
+index 072ffe3c5e..9a11ac4b2b 100644
+--- a/hw/pci-host/raven.c
++++ b/hw/pci-host/raven.c
+@@ -294,6 +294,13 @@ static void raven_pcihost_initfn(Object *obj)
+     memory_region_init(&s->pci_memory, obj, "pci-memory", 0x3f000000);
+     address_space_init(&s->pci_io_as, &s->pci_io, "raven-io");
+ 
++    /*
++     * Raven's raven_io_ops use the address-space API to access pci-conf-idx
++     * (which is also owned by the raven device). As such, mark the
++     * pci_io_non_contiguous as re-entrancy safe.
++     */
++    s->pci_io_non_contiguous.disable_reentrancy_guard = true;
++
+     /* CPU address space */
+     memory_region_add_subregion(address_space_mem, PCI_IO_BASE_ADDR,
+                                 &s->pci_io);

debian/patches/extra/0009-apic-disable-reentrancy-detection-for-apic-msi.patch

@@ -0,0 +1,36 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Alexander Bulekov <alxndr@bu.edu>
+Date: Thu, 27 Apr 2023 17:10:13 -0400
+Subject: [PATCH] apic: disable reentrancy detection for apic-msi
+
+As the code is designed for re-entrant calls to apic-msi, mark apic-msi
+as reentrancy-safe.
+
+Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
+Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
+Message-Id: <20230427211013.2994127-9-alxndr@bu.edu>
+Signed-off-by: Thomas Huth <thuth@redhat.com>
+(cherry-picked from commit 50795ee051a342c681a9b45671c552fbd6274db8)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/intc/apic.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/hw/intc/apic.c b/hw/intc/apic.c
+index 20b5a94073..ac3d47d231 100644
+--- a/hw/intc/apic.c
++++ b/hw/intc/apic.c
+@@ -885,6 +885,13 @@ static void apic_realize(DeviceState *dev, Error **errp)
+     memory_region_init_io(&s->io_memory, OBJECT(s), &apic_io_ops, s, "apic-msi",
+                           APIC_SPACE_SIZE);
+ 
++    /*
++     * apic-msi's apic_mem_write can call into ioapic_eoi_broadcast, which can
++     * write back to apic-msi. As such mark the apic-msi region re-entrancy
++     * safe.
++     */
++    s->io_memory.disable_reentrancy_guard = true;
++
+     s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, apic_timer, s);
+     local_apics[s->id] = s;
+ 

debian/patches/extra/0009-block-nbd-Move-s-ioc-on-AioContext-change.patch

@@ -1,90 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Hanna Reitz <hreitz@redhat.com>
-Date: Wed, 9 Feb 2022 15:02:57 +0100
-Subject: [PATCH] block/nbd: Move s->ioc on AioContext change
-
-s->ioc must always be attached to the NBD node's AioContext.  If that
-context changes, s->ioc must be attached to the new context.
-
-Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2033626
-Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
-Signed-off-by: Hanna Reitz <hreitz@redhat.com>
-[FE: backport (open_timer doesn't exist yet in 6.2.0)]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
----
- block/nbd.c | 41 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 41 insertions(+)
-
-diff --git a/block/nbd.c b/block/nbd.c
-index aab20125d8..a3896c7f5f 100644
---- a/block/nbd.c
-+++ b/block/nbd.c
-@@ -2003,6 +2003,38 @@ static void nbd_cancel_in_flight(BlockDriverState *bs)
-     nbd_co_establish_connection_cancel(s->conn);
- }
- 
-+static void nbd_attach_aio_context(BlockDriverState *bs,
-+                                   AioContext *new_context)
-+{
-+    BDRVNBDState *s = bs->opaque;
-+
-+    /*
-+     * The reconnect_delay_timer is scheduled in I/O paths when the
-+     * connection is lost, to cancel the reconnection attempt after a
-+     * given time.  Once this attempt is done (successfully or not),
-+     * nbd_reconnect_attempt() ensures the timer is deleted before the
-+     * respective I/O request is resumed.
-+     * Since the AioContext can only be changed when a node is drained,
-+     * the reconnect_delay_timer cannot be active here.
-+     */
-+    assert(!s->reconnect_delay_timer);
-+
-+    if (s->ioc) {
-+        qio_channel_attach_aio_context(s->ioc, new_context);
-+    }
-+}
-+
-+static void nbd_detach_aio_context(BlockDriverState *bs)
-+{
-+    BDRVNBDState *s = bs->opaque;
-+
-+    assert(!s->reconnect_delay_timer);
-+
-+    if (s->ioc) {
-+        qio_channel_detach_aio_context(s->ioc);
-+    }
-+}
-+
- static BlockDriver bdrv_nbd = {
-     .format_name                = "nbd",
-     .protocol_name              = "nbd",
-@@ -2026,6 +2058,9 @@ static BlockDriver bdrv_nbd = {
-     .bdrv_dirname               = nbd_dirname,
-     .strong_runtime_opts        = nbd_strong_runtime_opts,
-     .bdrv_cancel_in_flight      = nbd_cancel_in_flight,
-+
-+    .bdrv_attach_aio_context    = nbd_attach_aio_context,
-+    .bdrv_detach_aio_context    = nbd_detach_aio_context,
- };
- 
- static BlockDriver bdrv_nbd_tcp = {
-@@ -2051,6 +2086,9 @@ static BlockDriver bdrv_nbd_tcp = {
-     .bdrv_dirname               = nbd_dirname,
-     .strong_runtime_opts        = nbd_strong_runtime_opts,
-     .bdrv_cancel_in_flight      = nbd_cancel_in_flight,
-+
-+    .bdrv_attach_aio_context    = nbd_attach_aio_context,
-+    .bdrv_detach_aio_context    = nbd_detach_aio_context,
- };
- 
- static BlockDriver bdrv_nbd_unix = {
-@@ -2076,6 +2114,9 @@ static BlockDriver bdrv_nbd_unix = {
-     .bdrv_dirname               = nbd_dirname,
-     .strong_runtime_opts        = nbd_strong_runtime_opts,
-     .bdrv_cancel_in_flight      = nbd_cancel_in_flight,
-+
-+    .bdrv_attach_aio_context    = nbd_attach_aio_context,
-+    .bdrv_detach_aio_context    = nbd_detach_aio_context,
- };
- 
- static void bdrv_nbd_init(void)

debian/patches/extra/0010-acpi-fix-QEMU-crash-when-started-with-SLIC-table.patch

@@ -1,89 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Igor Mammedov <imammedo@redhat.com>
-Date: Mon, 27 Dec 2021 14:31:17 -0500
-Subject: [PATCH] acpi: fix QEMU crash when started with SLIC table
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-if QEMU is started with used provided SLIC table blob,
-
-  -acpitable sig=SLIC,oem_id='CRASH ',oem_table_id="ME",oem_rev=00002210,asl_compiler_id="",asl_compiler_rev=00000000,data=/dev/null
-it will assert with:
-
-  hw/acpi/aml-build.c:61:build_append_padded_str: assertion failed: (len <= maxlen)
-
-and following backtrace:
-
-  ...
-  build_append_padded_str (array=0x555556afe320, str=0x555556afdb2e "CRASH ME", maxlen=0x6, pad=0x20) at hw/acpi/aml-build.c:61
-  acpi_table_begin (desc=0x7fffffffd1b0, array=0x555556afe320) at hw/acpi/aml-build.c:1727
-  build_fadt (tbl=0x555556afe320, linker=0x555557ca3830, f=0x7fffffffd318, oem_id=0x555556afdb2e "CRASH ME", oem_table_id=0x555556afdb34 "ME") at hw/acpi/aml-build.c:2064
-  ...
-
-which happens due to acpi_table_begin() expecting NULL terminated
-oem_id and oem_table_id strings, which is normally the case, but
-in case of user provided SLIC table, oem_id points to table's blob
-directly and as result oem_id became longer than expected.
-
-Fix issue by handling oem_id consistently and make acpi_get_slic_oem()
-return NULL terminated strings.
-
-PS:
-After [1] refactoring, oem_id semantics became inconsistent, where
-NULL terminated string was coming from machine and old way pointer
-into byte array coming from -acpitable option. That used to work
-since build_header() wasn't expecting NULL terminated string and
-blindly copied the 1st 6 bytes only.
-
-However commit [2] broke that by replacing build_header() with
-acpi_table_begin(), which was expecting NULL terminated string
-and was checking oem_id size.
-
-1) 602b45820 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
-2)
-Fixes: 4b56e1e4eb08 ("acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of build_header()")
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/786
-Signed-off-by: Igor Mammedov <imammedo@redhat.com>
-Message-Id: <20211227193120.1084176-2-imammedo@redhat.com>
-Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
-Tested-by: Denis Lisov <dennis.lissov@gmail.com>
-Tested-by: Alexander Tsoy <alexander@tsoy.me>
-Cc: qemu-stable@nongnu.org
-Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
-Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-(cherry picked from commit 8cdb99af45365727ac17f45239a9b8c1d5155c6d)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/acpi/core.c       | 4 ++--
- hw/i386/acpi-build.c | 2 ++
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/hw/acpi/core.c b/hw/acpi/core.c
-index 1e004d0078..3e811bf03c 100644
---- a/hw/acpi/core.c
-+++ b/hw/acpi/core.c
-@@ -345,8 +345,8 @@ int acpi_get_slic_oem(AcpiSlicOem *oem)
-         struct acpi_table_header *hdr = (void *)(u - sizeof(hdr->_length));
- 
-         if (memcmp(hdr->sig, "SLIC", 4) == 0) {
--            oem->id = hdr->oem_id;
--            oem->table_id = hdr->oem_table_id;
-+            oem->id = g_strndup(hdr->oem_id, 6);
-+            oem->table_id = g_strndup(hdr->oem_table_id, 8);
-             return 0;
-         }
-     }
-diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
-index a99c6e4fe3..570f82997b 100644
---- a/hw/i386/acpi-build.c
-+++ b/hw/i386/acpi-build.c
-@@ -2721,6 +2721,8 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
- 
-     /* Cleanup memory that's no longer used. */
-     g_array_free(table_offsets, true);
-+    g_free(slic_oem.id);
-+    g_free(slic_oem.table_id);
- }
- 
- static void acpi_ram_update(MemoryRegion *mr, GArray *data)

debian/patches/extra/0011-virtio-net-fix-map-leaking-on-error-during-receive.patch

@@ -1,38 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Jason Wang <jasowang@redhat.com>
-Date: Tue, 8 Mar 2022 10:42:51 +0800
-Subject: [PATCH] virtio-net: fix map leaking on error during receive
-
-Commit bedd7e93d0196 ("virtio-net: fix use after unmap/free for sg")
-tries to fix the use after free of the sg by caching the virtqueue
-elements in an array and unmap them at once after receiving the
-packets, But it forgot to unmap the cached elements on error which
-will lead to leaking of mapping and other unexpected results.
-
-Fixing this by detaching the cached elements on error. This addresses
-CVE-2022-26353.
-
-Reported-by: Victor Tom <vv474172261@gmail.com>
-Cc: qemu-stable@nongnu.org
-Fixes: CVE-2022-26353
-Fixes: bedd7e93d0196 ("virtio-net: fix use after unmap/free for sg")
-Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
-Signed-off-by: Jason Wang <jasowang@redhat.com>
-(cherry picked from commit abe300d9d894f7138e1af7c8e9c88c04bfe98b37)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/net/virtio-net.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
-index f2014d5ea0..e1f4748831 100644
---- a/hw/net/virtio-net.c
-+++ b/hw/net/virtio-net.c
-@@ -1862,6 +1862,7 @@ static ssize_t virtio_net_receive_rcu(NetClientState *nc, const uint8_t *buf,
- 
- err:
-     for (j = 0; j < i; j++) {
-+        virtqueue_detach_element(q->rx_vq, elems[j], lens[j]);
-         g_free(elems[j]);
-     }
- 

debian/patches/extra/0012-memory-Fix-incorrect-calls-of-log_global_start-stop.patch

@@ -1,86 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Peter Xu <peterx@redhat.com>
-Date: Tue, 30 Nov 2021 16:00:28 +0800
-Subject: [PATCH] memory: Fix incorrect calls of log_global_start/stop
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We should only call the log_global_start/stop when the global dirty track
-bitmask changes from zero<->non-zero.
-
-No real issue reported for this yet probably because no immediate user to
-enable both dirty rate measurement and migration at the same time.  However
-it'll be good to be prepared for it.
-
-Fixes: 63b41db4bc ("memory: make global_dirty_tracking a bitmask")
-Cc: qemu-stable@nongnu.org
-Cc: Hyman Huang <huangy81@chinatelecom.cn>
-Cc: Paolo Bonzini <pbonzini@redhat.com>
-Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
-Cc: Juan Quintela <quintela@redhat.com>
-Cc: David Hildenbrand <david@redhat.com>
-Signed-off-by: Peter Xu <peterx@redhat.com>
-Reviewed-by: David Hildenbrand <david@redhat.com>
-Message-Id: <20211130080028.6474-1-peterx@redhat.com>
-Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-(cherry picked from commit 7b0538ed3a22ce30817f818449d10701fb0821f9)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- softmmu/memory.c | 27 ++++++++++++++-------------
- 1 file changed, 14 insertions(+), 13 deletions(-)
-
-diff --git a/softmmu/memory.c b/softmmu/memory.c
-index 7340e19ff5..81d4bf1454 100644
---- a/softmmu/memory.c
-+++ b/softmmu/memory.c
-@@ -2773,6 +2773,8 @@ static VMChangeStateEntry *vmstate_change;
- 
- void memory_global_dirty_log_start(unsigned int flags)
- {
-+    unsigned int old_flags = global_dirty_tracking;
-+
-     if (vmstate_change) {
-         qemu_del_vm_change_state_handler(vmstate_change);
-         vmstate_change = NULL;
-@@ -2781,15 +2783,14 @@ void memory_global_dirty_log_start(unsigned int flags)
-     assert(flags && !(flags & (~GLOBAL_DIRTY_MASK)));
-     assert(!(global_dirty_tracking & flags));
-     global_dirty_tracking |= flags;
--
-     trace_global_dirty_changed(global_dirty_tracking);
- 
--    MEMORY_LISTENER_CALL_GLOBAL(log_global_start, Forward);
--
--    /* Refresh DIRTY_MEMORY_MIGRATION bit.  */
--    memory_region_transaction_begin();
--    memory_region_update_pending = true;
--    memory_region_transaction_commit();
-+    if (!old_flags) {
-+        MEMORY_LISTENER_CALL_GLOBAL(log_global_start, Forward);
-+        memory_region_transaction_begin();
-+        memory_region_update_pending = true;
-+        memory_region_transaction_commit();
-+    }
- }
- 
- static void memory_global_dirty_log_do_stop(unsigned int flags)
-@@ -2800,12 +2801,12 @@ static void memory_global_dirty_log_do_stop(unsigned int flags)
- 
-     trace_global_dirty_changed(global_dirty_tracking);
- 
--    /* Refresh DIRTY_MEMORY_MIGRATION bit.  */
--    memory_region_transaction_begin();
--    memory_region_update_pending = true;
--    memory_region_transaction_commit();
--
--    MEMORY_LISTENER_CALL_GLOBAL(log_global_stop, Reverse);
-+    if (!global_dirty_tracking) {
-+        memory_region_transaction_begin();
-+        memory_region_update_pending = true;
-+        memory_region_transaction_commit();
-+        MEMORY_LISTENER_CALL_GLOBAL(log_global_stop, Reverse);
-+    }
- }
- 
- static void memory_vm_change_state_handler(void *opaque, bool running,

debian/patches/extra/0013-acpi-fix-OEM-ID-OEM-Table-ID-padding.patch

@@ -1,59 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Igor Mammedov <imammedo@redhat.com>
-Date: Wed, 12 Jan 2022 08:03:31 -0500
-Subject: [PATCH] acpi: fix OEM ID/OEM Table ID padding
-
-Commit [2] broke original '\0' padding of OEM ID and OEM Table ID
-fields in headers of ACPI tables. While it doesn't have impact on
-default values since QEMU uses 6 and 8 characters long values
-respectively, it broke usecase where IDs are provided on QEMU CLI.
-It shouldn't affect guest (but may cause licensing verification
-issues in guest OS).
-One of the broken usecases is user supplied SLIC table with IDs
-shorter than max possible length, where [2] mangles IDs with extra
-spaces in RSDT and FADT tables whereas guest OS expects those to
-mirror the respective values of the used SLIC table.
-
-Fix it by replacing whitespace padding with '\0' padding in
-accordance with [1] and expectations of guest OS
-
-1) ACPI spec, v2.0b
-       17.2 AML Grammar Definition
-       ...
-       //OEM ID of up to 6 characters. If the OEM ID is
-       //shorter than 6 characters, it can be terminated
-       //with a NULL character.
-
-2)
-Fixes: 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/707
-Reported-by: Dmitry V. Orekhov <dima.orekhov@gmail.com>
-Signed-off-by: Igor Mammedov <imammedo@redhat.com>
-Cc: qemu-stable@nongnu.org
-Message-Id: <20220112130332.1648664-4-imammedo@redhat.com>
-Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
-Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-Reviewed-by: Ani Sinha <ani@anisinha.ca>
-Tested-by: Dmitry V. Orekhov dima.orekhov@gmail.com
-(cherry picked from commit 748c030f360a940fe0c9382c8ca1649096c3a80d)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/acpi/aml-build.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
-index b3b3310df3..65148d5b9d 100644
---- a/hw/acpi/aml-build.c
-+++ b/hw/acpi/aml-build.c
-@@ -1724,9 +1724,9 @@ void acpi_table_begin(AcpiTable *desc, GArray *array)
-     build_append_int_noprefix(array, 0, 4); /* Length */
-     build_append_int_noprefix(array, desc->rev, 1); /* Revision */
-     build_append_int_noprefix(array, 0, 1); /* Checksum */
--    build_append_padded_str(array, desc->oem_id, 6, ' '); /* OEMID */
-+    build_append_padded_str(array, desc->oem_id, 6, '\0'); /* OEMID */
-     /* OEM Table ID */
--    build_append_padded_str(array, desc->oem_table_id, 8, ' ');
-+    build_append_padded_str(array, desc->oem_table_id, 8, '\0');
-     build_append_int_noprefix(array, 1, 4); /* OEM Revision */
-     g_array_append_vals(array, ACPI_BUILD_APPNAME8, 4); /* Creator ID */
-     build_append_int_noprefix(array, 1, 4); /* Creator Revision */

debian/patches/extra/0014-vhost-vsock-detach-the-virqueue-element-in-case-of-e.patch

@@ -1,55 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefano Garzarella <sgarzare@redhat.com>
-Date: Mon, 28 Feb 2022 10:50:58 +0100
-Subject: [PATCH] vhost-vsock: detach the virqueue element in case of error
-
-In vhost_vsock_common_send_transport_reset(), if an element popped from
-the virtqueue is invalid, we should call virtqueue_detach_element() to
-detach it from the virtqueue before freeing its memory.
-
-Fixes: fc0b9b0e1c ("vhost-vsock: add virtio sockets device")
-Fixes: CVE-2022-26354
-Cc: qemu-stable@nongnu.org
-Reported-by: VictorV <vv474172261@gmail.com>
-Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
-Message-Id: <20220228095058.27899-1-sgarzare@redhat.com>
-Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
-Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
-Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-(cherry picked from commit 8d1b247f3748ac4078524130c6d7ae42b6140aaf)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/virtio/vhost-vsock-common.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
-diff --git a/hw/virtio/vhost-vsock-common.c b/hw/virtio/vhost-vsock-common.c
-index 3f3771274e..ed706681ac 100644
---- a/hw/virtio/vhost-vsock-common.c
-+++ b/hw/virtio/vhost-vsock-common.c
-@@ -153,19 +153,23 @@ static void vhost_vsock_common_send_transport_reset(VHostVSockCommon *vvc)
-     if (elem->out_num) {
-         error_report("invalid vhost-vsock event virtqueue element with "
-                      "out buffers");
--        goto out;
-+        goto err;
-     }
- 
-     if (iov_from_buf(elem->in_sg, elem->in_num, 0,
-                      &event, sizeof(event)) != sizeof(event)) {
-         error_report("vhost-vsock event virtqueue element is too short");
--        goto out;
-+        goto err;
-     }
- 
-     virtqueue_push(vq, elem, sizeof(event));
-     virtio_notify(VIRTIO_DEVICE(vvc), vq);
- 
--out:
-+    g_free(elem);
-+    return;
-+
-+err:
-+    virtqueue_detach_element(vq, elem, 0);
-     g_free(elem);
- }
- 

debian/patches/extra/0015-vhost-user-remove-VirtQ-notifier-restore.patch

@@ -1,98 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xueming Li <xuemingl@nvidia.com>
-Date: Mon, 7 Feb 2022 15:19:28 +0800
-Subject: [PATCH] vhost-user: remove VirtQ notifier restore
-
-Notifier set when vhost-user backend asks qemu to mmap an FD and
-offset. When vhost-user backend restart or getting killed, VQ notifier
-FD and mmap addresses become invalid. After backend restart, MR contains
-the invalid address will be restored and fail on notifier access.
-
-On the other hand, qemu should munmap the notifier, release underlying
-hardware resources to enable backend restart and allocate hardware
-notifier resources correctly.
-
-Qemu shouldn't reference and use resources of disconnected backend.
-
-This patch removes VQ notifier restore, uses the default vhost-user
-notifier to avoid invalid address access.
-
-After backend restart, the backend should ask qemu to install a hardware
-notifier if needed.
-
-Fixes: 44866521bd6e ("vhost-user: support registering external host notifiers")
-Cc: qemu-stable@nongnu.org
-Signed-off-by: Xueming Li <xuemingl@nvidia.com>
-Message-Id: <20220207071929.527149-2-xuemingl@nvidia.com>
-Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
-Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-(cherry picked from commit e867144b73b3c5009266b6df07d5ff44acfb82c3)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/virtio/vhost-user.c         | 19 +------------------
- include/hw/virtio/vhost-user.h |  1 -
- 2 files changed, 1 insertion(+), 19 deletions(-)
-
-diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
-index bf6e50223c..c671719e9b 100644
---- a/hw/virtio/vhost-user.c
-+++ b/hw/virtio/vhost-user.c
-@@ -1143,19 +1143,6 @@ static int vhost_user_set_vring_num(struct vhost_dev *dev,
-     return vhost_set_vring(dev, VHOST_USER_SET_VRING_NUM, ring);
- }
- 
--static void vhost_user_host_notifier_restore(struct vhost_dev *dev,
--                                             int queue_idx)
--{
--    struct vhost_user *u = dev->opaque;
--    VhostUserHostNotifier *n = &u->user->notifier[queue_idx];
--    VirtIODevice *vdev = dev->vdev;
--
--    if (n->addr && !n->set) {
--        virtio_queue_set_host_notifier_mr(vdev, queue_idx, &n->mr, true);
--        n->set = true;
--    }
--}
--
- static void vhost_user_host_notifier_remove(struct vhost_dev *dev,
-                                             int queue_idx)
- {
-@@ -1163,17 +1150,14 @@ static void vhost_user_host_notifier_remove(struct vhost_dev *dev,
-     VhostUserHostNotifier *n = &u->user->notifier[queue_idx];
-     VirtIODevice *vdev = dev->vdev;
- 
--    if (n->addr && n->set) {
-+    if (n->addr) {
-         virtio_queue_set_host_notifier_mr(vdev, queue_idx, &n->mr, false);
--        n->set = false;
-     }
- }
- 
- static int vhost_user_set_vring_base(struct vhost_dev *dev,
-                                      struct vhost_vring_state *ring)
- {
--    vhost_user_host_notifier_restore(dev, ring->index);
--
-     return vhost_set_vring(dev, VHOST_USER_SET_VRING_BASE, ring);
- }
- 
-@@ -1538,7 +1522,6 @@ static int vhost_user_slave_handle_vring_host_notifier(struct vhost_dev *dev,
-     }
- 
-     n->addr = addr;
--    n->set = true;
- 
-     return 0;
- }
-diff --git a/include/hw/virtio/vhost-user.h b/include/hw/virtio/vhost-user.h
-index a9abca3288..f6012b2078 100644
---- a/include/hw/virtio/vhost-user.h
-+++ b/include/hw/virtio/vhost-user.h
-@@ -14,7 +14,6 @@
- typedef struct VhostUserHostNotifier {
-     MemoryRegion mr;
-     void *addr;
--    bool set;
- } VhostUserHostNotifier;
- 
- typedef struct VhostUserState {

debian/patches/extra/0016-vhost-user-fix-VirtQ-notifier-cleanup.patch

@@ -1,149 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Xueming Li <xuemingl@nvidia.com>
-Date: Mon, 7 Feb 2022 15:19:29 +0800
-Subject: [PATCH] vhost-user: fix VirtQ notifier cleanup
-
-When vhost-user device cleanup, remove notifier MR and munmaps notifier
-address in the event-handling thread, VM CPU thread writing the notifier
-in concurrent fails with an error of accessing invalid address. It
-happens because MR is still being referenced and accessed in another
-thread while the underlying notifier mmap address is being freed and
-becomes invalid.
-
-This patch calls RCU and munmap notifiers in the callback after the
-memory flatview update finish.
-
-Fixes: 44866521bd6e ("vhost-user: support registering external host notifiers")
-Cc: qemu-stable@nongnu.org
-Signed-off-by: Xueming Li <xuemingl@nvidia.com>
-Message-Id: <20220207071929.527149-3-xuemingl@nvidia.com>
-Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
-Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-(cherry picked from commit 0b0af4d62f7002b31cd7b2762b26d2fcb76bb2ba)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/virtio/vhost-user.c         | 48 ++++++++++++++++++++--------------
- include/hw/virtio/vhost-user.h |  2 ++
- 2 files changed, 31 insertions(+), 19 deletions(-)
-
-diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
-index c671719e9b..ed5f9a5471 100644
---- a/hw/virtio/vhost-user.c
-+++ b/hw/virtio/vhost-user.c
-@@ -25,6 +25,7 @@
- #include "migration/migration.h"
- #include "migration/postcopy-ram.h"
- #include "trace.h"
-+#include "exec/ramblock.h"
- 
- #include <sys/ioctl.h>
- #include <sys/socket.h>
-@@ -1143,15 +1144,26 @@ static int vhost_user_set_vring_num(struct vhost_dev *dev,
-     return vhost_set_vring(dev, VHOST_USER_SET_VRING_NUM, ring);
- }
- 
--static void vhost_user_host_notifier_remove(struct vhost_dev *dev,
--                                            int queue_idx)
-+static void vhost_user_host_notifier_free(VhostUserHostNotifier *n)
- {
--    struct vhost_user *u = dev->opaque;
--    VhostUserHostNotifier *n = &u->user->notifier[queue_idx];
--    VirtIODevice *vdev = dev->vdev;
-+    assert(n && n->unmap_addr);
-+    munmap(n->unmap_addr, qemu_real_host_page_size);
-+    n->unmap_addr = NULL;
-+}
-+
-+static void vhost_user_host_notifier_remove(VhostUserState *user,
-+                                            VirtIODevice *vdev, int queue_idx)
-+{
-+    VhostUserHostNotifier *n = &user->notifier[queue_idx];
- 
-     if (n->addr) {
--        virtio_queue_set_host_notifier_mr(vdev, queue_idx, &n->mr, false);
-+        if (vdev) {
-+            virtio_queue_set_host_notifier_mr(vdev, queue_idx, &n->mr, false);
-+        }
-+        assert(!n->unmap_addr);
-+        n->unmap_addr = n->addr;
-+        n->addr = NULL;
-+        call_rcu(n, vhost_user_host_notifier_free, rcu);
-     }
- }
- 
-@@ -1190,8 +1202,9 @@ static int vhost_user_get_vring_base(struct vhost_dev *dev,
-         .payload.state = *ring,
-         .hdr.size = sizeof(msg.payload.state),
-     };
-+    struct vhost_user *u = dev->opaque;
- 
--    vhost_user_host_notifier_remove(dev, ring->index);
-+    vhost_user_host_notifier_remove(u->user, dev->vdev, ring->index);
- 
-     if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
-         return -1;
-@@ -1486,12 +1499,7 @@ static int vhost_user_slave_handle_vring_host_notifier(struct vhost_dev *dev,
- 
-     n = &user->notifier[queue_idx];
- 
--    if (n->addr) {
--        virtio_queue_set_host_notifier_mr(vdev, queue_idx, &n->mr, false);
--        object_unparent(OBJECT(&n->mr));
--        munmap(n->addr, page_size);
--        n->addr = NULL;
--    }
-+    vhost_user_host_notifier_remove(user, vdev, queue_idx);
- 
-     if (area->u64 & VHOST_USER_VRING_NOFD_MASK) {
-         return 0;
-@@ -1510,9 +1518,12 @@ static int vhost_user_slave_handle_vring_host_notifier(struct vhost_dev *dev,
- 
-     name = g_strdup_printf("vhost-user/host-notifier@%p mmaps[%d]",
-                            user, queue_idx);
--    if (!n->mr.ram) /* Don't init again after suspend. */
-+    if (!n->mr.ram) { /* Don't init again after suspend. */
-         memory_region_init_ram_device_ptr(&n->mr, OBJECT(vdev), name,
-                                           page_size, addr);
-+    } else {
-+        n->mr.ram_block->host = addr;
-+    }
-     g_free(name);
- 
-     if (virtio_queue_set_host_notifier_mr(vdev, queue_idx, &n->mr, true)) {
-@@ -2460,17 +2471,16 @@ bool vhost_user_init(VhostUserState *user, CharBackend *chr, Error **errp)
- void vhost_user_cleanup(VhostUserState *user)
- {
-     int i;
-+    VhostUserHostNotifier *n;
- 
-     if (!user->chr) {
-         return;
-     }
-     memory_region_transaction_begin();
-     for (i = 0; i < VIRTIO_QUEUE_MAX; i++) {
--        if (user->notifier[i].addr) {
--            object_unparent(OBJECT(&user->notifier[i].mr));
--            munmap(user->notifier[i].addr, qemu_real_host_page_size);
--            user->notifier[i].addr = NULL;
--        }
-+        n = &user->notifier[i];
-+        vhost_user_host_notifier_remove(user, NULL, i);
-+        object_unparent(OBJECT(&n->mr));
-     }
-     memory_region_transaction_commit();
-     user->chr = NULL;
-diff --git a/include/hw/virtio/vhost-user.h b/include/hw/virtio/vhost-user.h
-index f6012b2078..e44a41bb70 100644
---- a/include/hw/virtio/vhost-user.h
-+++ b/include/hw/virtio/vhost-user.h
-@@ -12,8 +12,10 @@
- #include "hw/virtio/virtio.h"
- 
- typedef struct VhostUserHostNotifier {
-+    struct rcu_head rcu;
-     MemoryRegion mr;
-     void *addr;
-+    void *unmap_addr;
- } VhostUserHostNotifier;
- 
- typedef struct VhostUserState {

debian/patches/extra/0017-virtio-fix-the-condition-for-iommu_platform-not-supp.patch

@@ -1,101 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Halil Pasic <pasic@linux.ibm.com>
-Date: Mon, 7 Feb 2022 12:28:57 +0100
-Subject: [PATCH] virtio: fix the condition for iommu_platform not supported
-
-The commit 04ceb61a40 ("virtio: Fail if iommu_platform is requested, but
-unsupported") claims to fail the device hotplug when iommu_platform
-is requested, but not supported by the (vhost) device. On the first
-glance the condition for detecting that situation looks perfect, but
-because a certain peculiarity of virtio_platform it ain't.
-
-In fact the aforementioned commit introduces a regression. It breaks
-virtio-fs support for Secure Execution, and most likely also for AMD SEV
-or any other confidential guest scenario that relies encrypted guest
-memory.  The same also applies to any other vhost device that does not
-support _F_ACCESS_PLATFORM.
-
-The peculiarity is that iommu_platform and _F_ACCESS_PLATFORM collates
-"device can not access all of the guest RAM" and "iova != gpa, thus
-device needs to translate iova".
-
-Confidential guest technologies currently rely on the device/hypervisor
-offering _F_ACCESS_PLATFORM, so that, after the feature has been
-negotiated, the guest  grants access to the portions of memory the
-device needs to see. So in for confidential guests, generally,
-_F_ACCESS_PLATFORM is about the restricted access to memory, but not
-about the addresses used being something else than guest physical
-addresses.
-
-This is the very reason for which commit f7ef7e6e3b ("vhost: correctly
-turn on VIRTIO_F_IOMMU_PLATFORM") fences _F_ACCESS_PLATFORM from the
-vhost device that does not need it, because on the vhost interface it
-only means "I/O address translation is needed".
-
-This patch takes inspiration from f7ef7e6e3b ("vhost: correctly turn on
-VIRTIO_F_IOMMU_PLATFORM"), and uses the same condition for detecting the
-situation when _F_ACCESS_PLATFORM is requested, but no I/O translation
-by the device, and thus no device capability is needed. In this
-situation claiming that the device does not support iommu_plattform=on
-is counter-productive. So let us stop doing that!
-
-Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
-Reported-by: Jakob Naucke <Jakob.Naucke@ibm.com>
-Fixes: 04ceb61a40 ("virtio: Fail if iommu_platform is requested, but
-unsupported")
-Acked-by: Cornelia Huck <cohuck@redhat.com>
-Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
-Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
-Cc: Kevin Wolf <kwolf@redhat.com>
-Cc: qemu-stable@nongnu.org
-
-Message-Id: <20220207112857.607829-1-pasic@linux.ibm.com>
-Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
-Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-Acked-by: Jason Wang <jasowang@redhat.com>
-(cherry picked from commit e65902a913bf31ba79a83a3bd3621108b85cf645)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/virtio/virtio-bus.c | 12 +++++++-----
- 1 file changed, 7 insertions(+), 5 deletions(-)
-
-diff --git a/hw/virtio/virtio-bus.c b/hw/virtio/virtio-bus.c
-index d23db98c56..0f69d1c742 100644
---- a/hw/virtio/virtio-bus.c
-+++ b/hw/virtio/virtio-bus.c
-@@ -48,6 +48,7 @@ void virtio_bus_device_plugged(VirtIODevice *vdev, Error **errp)
-     VirtioBusClass *klass = VIRTIO_BUS_GET_CLASS(bus);
-     VirtioDeviceClass *vdc = VIRTIO_DEVICE_GET_CLASS(vdev);
-     bool has_iommu = virtio_host_has_feature(vdev, VIRTIO_F_IOMMU_PLATFORM);
-+    bool vdev_has_iommu;
-     Error *local_err = NULL;
- 
-     DPRINTF("%s: plug device.\n", qbus->name);
-@@ -69,11 +70,6 @@ void virtio_bus_device_plugged(VirtIODevice *vdev, Error **errp)
-         return;
-     }
- 
--    if (has_iommu && !virtio_host_has_feature(vdev, VIRTIO_F_IOMMU_PLATFORM)) {
--        error_setg(errp, "iommu_platform=true is not supported by the device");
--        return;
--    }
--
-     if (klass->device_plugged != NULL) {
-         klass->device_plugged(qbus->parent, &local_err);
-     }
-@@ -82,9 +78,15 @@ void virtio_bus_device_plugged(VirtIODevice *vdev, Error **errp)
-         return;
-     }
- 
-+    vdev_has_iommu = virtio_host_has_feature(vdev, VIRTIO_F_IOMMU_PLATFORM);
-     if (klass->get_dma_as != NULL && has_iommu) {
-         virtio_add_feature(&vdev->host_features, VIRTIO_F_IOMMU_PLATFORM);
-         vdev->dma_as = klass->get_dma_as(qbus->parent);
-+        if (!vdev_has_iommu && vdev->dma_as != &address_space_memory) {
-+            error_setg(errp,
-+                       "iommu_platform=true is not supported by the device");
-+            return;
-+        }
-     } else {
-         vdev->dma_as = &address_space_memory;
-     }

debian/patches/extra/0018-block-gluster-correctly-set-max_pdiscard-which-is-in.patch

@@ -1,38 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Fabian Ebner <f.ebner@proxmox.com>
-Date: Fri, 6 May 2022 14:38:35 +0200
-Subject: [PATCH] block/gluster: correctly set max_pdiscard which is int64_t
-
-Previously, max_pdiscard would be zero in the following assertion:
-qemu-system-x86_64: ../block/io.c:3166: bdrv_co_pdiscard: Assertion
-`max_pdiscard >= bs->bl.request_alignment' failed.
-
-Fixes: 0c8022876f ("block: use int64_t instead of int in driver discard handlers")
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- block/gluster.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/block/gluster.c b/block/gluster.c
-index 398976bc66..592e71b22a 100644
---- a/block/gluster.c
-+++ b/block/gluster.c
-@@ -891,7 +891,7 @@ out:
- static void qemu_gluster_refresh_limits(BlockDriverState *bs, Error **errp)
- {
-     bs->bl.max_transfer = GLUSTER_MAX_TRANSFER;
--    bs->bl.max_pdiscard = SIZE_MAX;
-+    bs->bl.max_pdiscard = INT64_MAX;
- }
- 
- static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
-@@ -1304,7 +1304,7 @@ static coroutine_fn int qemu_gluster_co_pdiscard(BlockDriverState *bs,
-     GlusterAIOCB acb;
-     BDRVGlusterState *s = bs->opaque;
- 
--    assert(bytes <= SIZE_MAX); /* rely on max_pdiscard */
-+    assert(bytes <= INT64_MAX); /* rely on max_pdiscard */
- 
-     acb.size = 0;
-     acb.ret = 0;

debian/patches/extra/0019-ui-vnc.c-Fixed-a-deadlock-bug.patch

@@ -1,72 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Rao Lei <lei.rao@intel.com>
-Date: Fri, 6 May 2022 14:38:36 +0200
-Subject: [PATCH] ui/vnc.c: Fixed a deadlock bug.
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The GDB statck is as follows:
-(gdb) bt
-0  __lll_lock_wait (futex=futex@entry=0x56211df20360, private=0) at lowlevellock.c:52
-1  0x00007f263caf20a3 in __GI___pthread_mutex_lock (mutex=0x56211df20360) at ../nptl/pthread_mutex_lock.c:80
-2  0x000056211a757364 in qemu_mutex_lock_impl (mutex=0x56211df20360, file=0x56211a804857 "../ui/vnc-jobs.h", line=60)
-    at ../util/qemu-thread-posix.c:80
-3  0x000056211a0ef8c7 in vnc_lock_output (vs=0x56211df14200) at ../ui/vnc-jobs.h:60
-4  0x000056211a0efcb7 in vnc_clipboard_send (vs=0x56211df14200, count=1, dwords=0x7ffdf1701338) at ../ui/vnc-clipboard.c:138
-5  0x000056211a0f0129 in vnc_clipboard_notify (notifier=0x56211df244c8, data=0x56211dd1bbf0) at ../ui/vnc-clipboard.c:209
-6  0x000056211a75dde8 in notifier_list_notify (list=0x56211afa17d0 <clipboard_notifiers>, data=0x56211dd1bbf0) at ../util/notify.c:39
-7  0x000056211a0bf0e6 in qemu_clipboard_update (info=0x56211dd1bbf0) at ../ui/clipboard.c:50
-8  0x000056211a0bf05d in qemu_clipboard_peer_release (peer=0x56211df244c0, selection=QEMU_CLIPBOARD_SELECTION_CLIPBOARD)
-    at ../ui/clipboard.c:41
-9  0x000056211a0bef9b in qemu_clipboard_peer_unregister (peer=0x56211df244c0) at ../ui/clipboard.c:19
-10 0x000056211a0d45f3 in vnc_disconnect_finish (vs=0x56211df14200) at ../ui/vnc.c:1358
-11 0x000056211a0d4c9d in vnc_client_read (vs=0x56211df14200) at ../ui/vnc.c:1611
-12 0x000056211a0d4df8 in vnc_client_io (ioc=0x56211ce70690, condition=G_IO_IN, opaque=0x56211df14200) at ../ui/vnc.c:1649
-13 0x000056211a5b976c in qio_channel_fd_source_dispatch
-    (source=0x56211ce50a00, callback=0x56211a0d4d71 <vnc_client_io>, user_data=0x56211df14200) at ../io/channel-watch.c:84
-14 0x00007f263ccede8e in g_main_context_dispatch () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
-15 0x000056211a77d4a1 in glib_pollfds_poll () at ../util/main-loop.c:232
-16 0x000056211a77d51f in os_host_main_loop_wait (timeout=958545) at ../util/main-loop.c:255
-17 0x000056211a77d630 in main_loop_wait (nonblocking=0) at ../util/main-loop.c:531
-18 0x000056211a45bc8e in qemu_main_loop () at ../softmmu/runstate.c:726
-19 0x000056211a0b45fa in main (argc=69, argv=0x7ffdf1701778, envp=0x7ffdf17019a8) at ../softmmu/main.c:50
-
-From the call trace, we can see it is a deadlock bug.
-vnc_disconnect_finish will acquire the output_mutex.
-But, the output_mutex will be acquired again in vnc_clipboard_send.
-Repeated locking will cause deadlock. So, I move
-qemu_clipboard_peer_unregister() behind vnc_unlock_output();
-
-Fixes: 0bf41cab93e ("ui/vnc: clipboard support")
-Signed-off-by: Lei Rao <lei.rao@intel.com>
-Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-Message-Id: <20220105020808.597325-1-lei.rao@intel.com>
-Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-(cherry-picked from commit 1dbbe6f172810026c51dc84ed927a3cc23017949)
-[FE: trivial backport for 6.2]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- ui/vnc.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/ui/vnc.c b/ui/vnc.c
-index af02522e84..b253e85c65 100644
---- a/ui/vnc.c
-+++ b/ui/vnc.c
-@@ -1354,12 +1354,12 @@ void vnc_disconnect_finish(VncState *vs)
-         /* last client gone */
-         vnc_update_server_surface(vs->vd);
-     }
-+    vnc_unlock_output(vs);
-+
-     if (vs->cbpeer.update.notify) {
-         qemu_clipboard_peer_unregister(&vs->cbpeer);
-     }
- 
--    vnc_unlock_output(vs);
--
-     qemu_mutex_destroy(&vs->output_mutex);
-     if (vs->bh != NULL) {
-         qemu_bh_delete(vs->bh);

debian/patches/extra/0020-display-qxl-render-fix-race-condition-in-qxl_cursor-.patch

@@ -1,37 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Mauro Matteo Cascella <mcascell@redhat.com>
-Date: Thu, 7 Apr 2022 10:11:06 +0200
-Subject: [PATCH] display/qxl-render: fix race condition in qxl_cursor
- (CVE-2021-4207)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Avoid fetching 'width' and 'height' a second time to prevent possible
-race condition. Refer to security advisory
-https://starlabs.sg/advisories/22-4207/ for more information.
-
-Fixes: CVE-2021-4207
-Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
-Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-Message-Id: <20220407081106.343235-1-mcascell@redhat.com>
-Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-(cherry picked from commit 9569f5cb5b4bffa9d3ebc8ba7da1e03830a9a895)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/display/qxl-render.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/hw/display/qxl-render.c b/hw/display/qxl-render.c
-index d28849b121..237ed293ba 100644
---- a/hw/display/qxl-render.c
-+++ b/hw/display/qxl-render.c
-@@ -266,7 +266,7 @@ static QEMUCursor *qxl_cursor(PCIQXLDevice *qxl, QXLCursor *cursor,
-         }
-         break;
-     case SPICE_CURSOR_TYPE_ALPHA:
--        size = sizeof(uint32_t) * cursor->header.width * cursor->header.height;
-+        size = sizeof(uint32_t) * c->width * c->height;
-         qxl_unpack_chunks(c->data, size, qxl, &cursor->chunk, group_id);
-         if (qxl->debug > 2) {
-             cursor_print_ascii_art(c, "qxl/alpha");

debian/patches/extra/0021-ui-cursor-fix-integer-overflow-in-cursor_alloc-CVE-2.patch

@@ -1,83 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Mauro Matteo Cascella <mcascell@redhat.com>
-Date: Thu, 7 Apr 2022 10:17:12 +0200
-Subject: [PATCH] ui/cursor: fix integer overflow in cursor_alloc
- (CVE-2021-4206)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Prevent potential integer overflow by limiting 'width' and 'height' to
-512x512. Also change 'datasize' type to size_t. Refer to security
-advisory https://starlabs.sg/advisories/22-4206/ for more information.
-
-Fixes: CVE-2021-4206
-Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
-Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-Message-Id: <20220407081712.345609-1-mcascell@redhat.com>
-Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-(cherry picked from commit fa892e9abb728e76afcf27323ab29c57fb0fe7aa)
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- hw/display/qxl-render.c | 7 +++++++
- hw/display/vmware_vga.c | 2 ++
- ui/cursor.c             | 8 +++++++-
- 3 files changed, 16 insertions(+), 1 deletion(-)
-
-diff --git a/hw/display/qxl-render.c b/hw/display/qxl-render.c
-index 237ed293ba..ca217004bf 100644
---- a/hw/display/qxl-render.c
-+++ b/hw/display/qxl-render.c
-@@ -247,6 +247,13 @@ static QEMUCursor *qxl_cursor(PCIQXLDevice *qxl, QXLCursor *cursor,
-     size_t size;
- 
-     c = cursor_alloc(cursor->header.width, cursor->header.height);
-+
-+    if (!c) {
-+        qxl_set_guest_bug(qxl, "%s: cursor %ux%u alloc error", __func__,
-+                cursor->header.width, cursor->header.height);
-+        goto fail;
-+    }
-+
-     c->hot_x = cursor->header.hot_spot_x;
-     c->hot_y = cursor->header.hot_spot_y;
-     switch (cursor->header.type) {
-diff --git a/hw/display/vmware_vga.c b/hw/display/vmware_vga.c
-index e2969a6c81..2b81d6122f 100644
---- a/hw/display/vmware_vga.c
-+++ b/hw/display/vmware_vga.c
-@@ -509,6 +509,8 @@ static inline void vmsvga_cursor_define(struct vmsvga_state_s *s,
-     int i, pixels;
- 
-     qc = cursor_alloc(c->width, c->height);
-+    assert(qc != NULL);
-+
-     qc->hot_x = c->hot_x;
-     qc->hot_y = c->hot_y;
-     switch (c->bpp) {
-diff --git a/ui/cursor.c b/ui/cursor.c
-index 1d62ddd4d0..835f0802f9 100644
---- a/ui/cursor.c
-+++ b/ui/cursor.c
-@@ -46,6 +46,8 @@ static QEMUCursor *cursor_parse_xpm(const char *xpm[])
- 
-     /* parse pixel data */
-     c = cursor_alloc(width, height);
-+    assert(c != NULL);
-+
-     for (pixel = 0, y = 0; y < height; y++, line++) {
-         for (x = 0; x < height; x++, pixel++) {
-             idx = xpm[line][x];
-@@ -91,7 +93,11 @@ QEMUCursor *cursor_builtin_left_ptr(void)
- QEMUCursor *cursor_alloc(int width, int height)
- {
-     QEMUCursor *c;
--    int datasize = width * height * sizeof(uint32_t);
-+    size_t datasize = width * height * sizeof(uint32_t);
-+
-+    if (width > 512 || height > 512) {
-+        return NULL;
-+    }
- 
-     c = g_malloc0(sizeof(QEMUCursor) + datasize);
-     c->width  = width;

debian/patches/pve/0001-PVE-Config-block-file-change-locking-default-to-off.patch

@@ -14,10 +14,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/block/file-posix.c b/block/file-posix.c
-index b283093e5b..821405fd02 100644
+index c2dee3f056..9681bd0434 100644
 --- a/block/file-posix.c
 +++ b/block/file-posix.c
-@@ -552,7 +552,7 @@ static QemuOptsList raw_runtime_opts = {
+@@ -553,7 +553,7 @@ static QemuOptsList raw_runtime_opts = {
          {
              .name = "locking",
              .type = QEMU_OPT_STRING,
@@ -26,7 +26,7 @@ index b283093e5b..821405fd02 100644
          },
          {
              .name = "pr-manager",
-@@ -652,7 +652,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
+@@ -653,7 +653,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
          s->use_lock = false;
          break;
      case ON_OFF_AUTO_AUTO:

debian/patches/pve/0002-PVE-Config-Adjust-network-script-path-to-etc-kvm.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/include/net/net.h b/include/net/net.h
-index 523136c7ac..c27859b4f6 100644
+index 1448d00afb..d1601d32c1 100644
 --- a/include/net/net.h
 +++ b/include/net/net.h
-@@ -226,8 +226,8 @@ void netdev_add(QemuOpts *opts, Error **errp);
+@@ -258,8 +258,8 @@ void netdev_add(QemuOpts *opts, Error **errp);
  int net_hub_id_for_client(NetClientState *nc, int *id);
  NetClientState *net_hub_port_find(int hub_id);
  

debian/patches/pve/0003-PVE-Config-set-the-CPU-model-to-kvm64-32-instead-of-.patch

@@ -10,10 +10,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/target/i386/cpu.h b/target/i386/cpu.h
-index 04f2b790c9..19fdbb981c 100644
+index d243e290d3..3489b05ec4 100644
 --- a/target/i386/cpu.h
 +++ b/target/i386/cpu.h
-@@ -2039,9 +2039,9 @@ uint64_t cpu_get_tsc(CPUX86State *env);
+@@ -2203,9 +2203,9 @@ uint64_t cpu_get_tsc(CPUX86State *env);
  #define CPU_RESOLVING_TYPE TYPE_X86_CPU
  
  #ifdef TARGET_X86_64

debian/patches/pve/0004-PVE-Config-ui-spice-default-to-pve-certificates.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+), 6 deletions(-)
 
 diff --git a/ui/spice-core.c b/ui/spice-core.c
-index 31974b8d6c..a3acdbd682 100644
+index 52a59386d7..b20c25aee0 100644
 --- a/ui/spice-core.c
 +++ b/ui/spice-core.c
-@@ -689,32 +689,35 @@ static void qemu_spice_init(void)
+@@ -691,32 +691,35 @@ static void qemu_spice_init(void)
  
      if (tls_port) {
          x509_dir = qemu_opt_get(opts, "x509-dir");

debian/patches/pve/0005-PVE-Config-glusterfs-no-default-logfile-if-daemonize.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 11 insertions(+), 4 deletions(-)
 
 diff --git a/block/gluster.c b/block/gluster.c
-index 592e71b22a..aebfece6eb 100644
+index 185a83e5e5..f11a40aa9e 100644
 --- a/block/gluster.c
 +++ b/block/gluster.c
-@@ -42,7 +42,7 @@
+@@ -43,7 +43,7 @@
  #define GLUSTER_DEBUG_DEFAULT       4
  #define GLUSTER_DEBUG_MAX           9
  #define GLUSTER_OPT_LOGFILE         "logfile"
@@ -21,7 +21,7 @@ index 592e71b22a..aebfece6eb 100644
  /*
   * Several versions of GlusterFS (3.12? -> 6.0.1) fail when the transfer size
   * is greater or equal to 1024 MiB, so we are limiting the transfer size to 512
-@@ -424,6 +424,7 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
+@@ -425,6 +425,7 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
      int old_errno;
      SocketAddressList *server;
      unsigned long long port;
@@ -29,7 +29,7 @@ index 592e71b22a..aebfece6eb 100644
  
      glfs = glfs_find_preopened(gconf->volume);
      if (glfs) {
-@@ -466,9 +467,15 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
+@@ -467,9 +468,15 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
          }
      }
  

debian/patches/pve/0006-PVE-Config-rbd-block-rbd-disable-rbd_cache_writethro.patch

@@ -18,10 +18,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+)
 
 diff --git a/block/rbd.c b/block/rbd.c
-index def96292e0..a4b8fb482c 100644
+index 978671411e..a4749f3b1b 100644
 --- a/block/rbd.c
 +++ b/block/rbd.c
-@@ -820,6 +820,8 @@ static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
+@@ -963,6 +963,8 @@ static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
          rados_conf_set(*cluster, "rbd_cache", "false");
      }
  

debian/patches/pve/0007-PVE-Up-glusterfs-allow-partial-reads.patch

@@ -16,10 +16,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+), 1 deletion(-)
 
 diff --git a/block/gluster.c b/block/gluster.c
-index aebfece6eb..3b7ee2f649 100644
+index f11a40aa9e..6756e6b886 100644
 --- a/block/gluster.c
 +++ b/block/gluster.c
-@@ -57,6 +57,7 @@ typedef struct GlusterAIOCB {
+@@ -58,6 +58,7 @@ typedef struct GlusterAIOCB {
      int ret;
      Coroutine *coroutine;
      AioContext *aio_context;
@@ -27,7 +27,7 @@ index aebfece6eb..3b7ee2f649 100644
  } GlusterAIOCB;
  
  typedef struct BDRVGlusterState {
-@@ -752,8 +753,10 @@ static void gluster_finish_aiocb(struct glfs_fd *fd, ssize_t ret,
+@@ -753,8 +754,10 @@ static void gluster_finish_aiocb(struct glfs_fd *fd, ssize_t ret,
          acb->ret = 0; /* Success */
      } else if (ret < 0) {
          acb->ret = -errno; /* Read/Write failed */
@@ -39,7 +39,7 @@ index aebfece6eb..3b7ee2f649 100644
      }
  
      aio_co_schedule(acb->aio_context, acb->coroutine);
-@@ -1022,6 +1025,7 @@ static coroutine_fn int qemu_gluster_co_pwrite_zeroes(BlockDriverState *bs,
+@@ -1021,6 +1024,7 @@ static coroutine_fn int qemu_gluster_co_pwrite_zeroes(BlockDriverState *bs,
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);
@@ -47,7 +47,7 @@ index aebfece6eb..3b7ee2f649 100644
  
      ret = glfs_zerofill_async(s->fd, offset, bytes, gluster_finish_aiocb, &acb);
      if (ret < 0) {
-@@ -1203,9 +1207,11 @@ static coroutine_fn int qemu_gluster_co_rw(BlockDriverState *bs,
+@@ -1201,9 +1205,11 @@ static coroutine_fn int qemu_gluster_co_rw(BlockDriverState *bs,
      acb.aio_context = bdrv_get_aio_context(bs);
  
      if (write) {
@@ -59,7 +59,7 @@ index aebfece6eb..3b7ee2f649 100644
          ret = glfs_preadv_async(s->fd, qiov->iov, qiov->niov, offset, 0,
                                  gluster_finish_aiocb, &acb);
      }
-@@ -1269,6 +1275,7 @@ static coroutine_fn int qemu_gluster_co_flush_to_disk(BlockDriverState *bs)
+@@ -1266,6 +1272,7 @@ static coroutine_fn int qemu_gluster_co_flush_to_disk(BlockDriverState *bs)
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);
@@ -67,7 +67,7 @@ index aebfece6eb..3b7ee2f649 100644
  
      ret = glfs_fsync_async(s->fd, gluster_finish_aiocb, &acb);
      if (ret < 0) {
-@@ -1317,6 +1324,7 @@ static coroutine_fn int qemu_gluster_co_pdiscard(BlockDriverState *bs,
+@@ -1314,6 +1321,7 @@ static coroutine_fn int qemu_gluster_co_pdiscard(BlockDriverState *bs,
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);

debian/patches/pve/0007-PVE-Up-qmp-add-get_link_status.patch

@@ -1,88 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Wolfgang Bumiller <w.bumiller@proxmox.com>
-Date: Mon, 6 Apr 2020 12:16:37 +0200
-Subject: [PATCH] PVE: [Up] qmp: add get_link_status
-
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- net/net.c        | 27 +++++++++++++++++++++++++++
- qapi/net.json    | 15 +++++++++++++++
- qapi/pragma.json |  1 +
- 3 files changed, 43 insertions(+)
-
-diff --git a/net/net.c b/net/net.c
-index f0d14dbfc1..6d476c47ef 100644
---- a/net/net.c
-+++ b/net/net.c
-@@ -1334,6 +1334,33 @@ void hmp_info_network(Monitor *mon, const QDict *qdict)
-     }
- }
- 
-+int64_t qmp_get_link_status(const char *name, Error **errp)
-+{
-+    NetClientState *ncs[MAX_QUEUE_NUM];
-+    NetClientState *nc;
-+    int queues;
-+    bool ret;
-+
-+    queues = qemu_find_net_clients_except(name, ncs,
-+                                          NET_CLIENT_DRIVER__MAX,
-+                                          MAX_QUEUE_NUM);
-+
-+    if (queues == 0) {
-+        error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
-+                  "Device '%s' not found", name);
-+        return (int64_t) -1;
-+    }
-+
-+    nc = ncs[0];
-+    ret = ncs[0]->link_down;
-+
-+    if (nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
-+      ret = ncs[0]->peer->link_down;
-+    }
-+
-+    return (int64_t) ret ? 0 : 1;
-+}
-+
- void colo_notify_filters_event(int event, Error **errp)
- {
-     NetClientState *nc;
-diff --git a/qapi/net.json b/qapi/net.json
-index 7fab2e7cd8..74c9a6109e 100644
---- a/qapi/net.json
-+++ b/qapi/net.json
-@@ -35,6 +35,21 @@
- ##
- { 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} }
- 
-+##
-+# @get_link_status:
-+#
-+# Get the current link state of the nics or nic.
-+#
-+# @name: name of the nic you get the state of
-+#
-+# Return: If link is up 1
-+#         If link is down 0
-+#         If an error occure an empty string.
-+#
-+# Notes: this is an Proxmox VE extension and not offical part of Qemu.
-+##
-+{ 'command': 'get_link_status', 'data': {'name': 'str'} , 'returns': 'int' }
-+
- ##
- # @netdev_add:
- #
-diff --git a/qapi/pragma.json b/qapi/pragma.json
-index 3bc0335d1f..7c91ea3685 100644
---- a/qapi/pragma.json
-+++ b/qapi/pragma.json
-@@ -22,6 +22,7 @@
-         'system_reset',
-         'system_wakeup' ],
-     'command-returns-exceptions': [
-+        'get_link_status',
-         'human-monitor-command',
-         'qom-get',
-         'query-tpm-models',

debian/patches/pve/0008-PVE-Up-qemu-img-return-success-on-info-without-snaps.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 1 deletion(-)
 
 diff --git a/qemu-img.c b/qemu-img.c
-index f036a1d428..080ad9bca7 100644
+index 9aeac69fa6..0919fac1f1 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -2989,7 +2989,8 @@ static int img_info(int argc, char **argv)
+@@ -3059,7 +3059,8 @@ static int img_info(int argc, char **argv)
      list = collect_image_info_list(image_opts, filename, fmt, chain,
                                     force_share);
      if (!list) {

debian/patches/pve/0009-PVE-Up-qemu-img-dd-add-osize-and-read-from-to-stdin-.patch

@@ -31,13 +31,14 @@ override the output file's size.
 
 Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  qemu-img-cmds.hx |   4 +-
- qemu-img.c       | 187 +++++++++++++++++++++++++++++------------------
- 2 files changed, 119 insertions(+), 72 deletions(-)
+ qemu-img.c       | 202 ++++++++++++++++++++++++++++++-----------------
+ 2 files changed, 133 insertions(+), 73 deletions(-)
 
 diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
-index 72bcdcfbfa..0b2999f3ab 100644
+index 1b1dab5b17..d1616c045a 100644
 --- a/qemu-img-cmds.hx
 +++ b/qemu-img-cmds.hx
 @@ -58,9 +58,9 @@ SRST
@@ -53,10 +54,10 @@ index 72bcdcfbfa..0b2999f3ab 100644
  
  DEF("info", img_info,
 diff --git a/qemu-img.c b/qemu-img.c
-index 080ad9bca7..1f457d9e80 100644
+index 0919fac1f1..c584de648c 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -4805,10 +4805,12 @@ static int img_bitmap(int argc, char **argv)
+@@ -4885,10 +4885,12 @@ static int img_bitmap(int argc, char **argv)
  #define C_IF      04
  #define C_OF      010
  #define C_SKIP    020
@@ -69,7 +70,7 @@ index 080ad9bca7..1f457d9e80 100644
  };
  
  struct DdIo {
-@@ -4884,6 +4886,19 @@ static int img_dd_skip(const char *arg,
+@@ -4964,6 +4966,19 @@ static int img_dd_skip(const char *arg,
      return 0;
  }
  
@@ -89,7 +90,7 @@ index 080ad9bca7..1f457d9e80 100644
  static int img_dd(int argc, char **argv)
  {
      int ret = 0;
-@@ -4924,6 +4939,7 @@ static int img_dd(int argc, char **argv)
+@@ -5004,6 +5019,7 @@ static int img_dd(int argc, char **argv)
          { "if", img_dd_if, C_IF },
          { "of", img_dd_of, C_OF },
          { "skip", img_dd_skip, C_SKIP },
@@ -97,7 +98,7 @@ index 080ad9bca7..1f457d9e80 100644
          { NULL, NULL, 0 }
      };
      const struct option long_options[] = {
-@@ -4999,91 +5015,112 @@ static int img_dd(int argc, char **argv)
+@@ -5079,91 +5095,112 @@ static int img_dd(int argc, char **argv)
          arg = NULL;
      }
  
@@ -153,9 +154,9 @@ index 080ad9bca7..1f457d9e80 100644
      }
 -    create_opts = qemu_opts_append(create_opts, drv->create_opts);
 -    create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
- 
--    opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
 -
+-    opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
+ 
 -    size = blk_getlength(blk1);
 -    if (size < 0) {
 -        error_report("Failed to get size for '%s'", in.filename);
@@ -274,41 +275,54 @@ index 080ad9bca7..1f457d9e80 100644
      }
  
      if (dd.flags & C_SKIP && (in.offset > INT64_MAX / in.bsz ||
-@@ -5101,11 +5138,17 @@ static int img_dd(int argc, char **argv)
+@@ -5180,20 +5217,43 @@ static int img_dd(int argc, char **argv)
+     in.buf = g_new(uint8_t, in.bsz);
  
-     for (out_pos = 0; in_pos < size; block_count++) {
-         int in_ret, out_ret;
+     for (out_pos = 0; in_pos < size; ) {
++        int in_ret, out_ret;
+         int bytes = (in_pos + in.bsz > size) ? size - in_pos : in.bsz;
 -
--        if (in_pos + in.bsz > size) {
--            in_ret = blk_pread(blk1, in_pos, in.buf, size - in_pos);
-+        size_t in_bsz = in_pos + in.bsz > size ? size - in_pos : in.bsz;
+-        ret = blk_pread(blk1, in_pos, bytes, in.buf, 0);
+-        if (ret < 0) {
 +        if (blk1) {
-+            in_ret = blk_pread(blk1, in_pos, in.buf, in_bsz);
-         } else {
--            in_ret = blk_pread(blk1, in_pos, in.buf, in.bsz);
-+            in_ret = read(STDIN_FILENO, in.buf, in_bsz);
++            in_ret = blk_pread(blk1, in_pos, bytes, in.buf, 0);
++            if (in_ret == 0) {
++                in_ret = bytes;
++            }
++        } else {
++            in_ret = read(STDIN_FILENO, in.buf, bytes);
 +            if (in_ret == 0) {
 +                /* early EOF is considered an error */
 +                error_report("Input ended unexpectedly");
 +                ret = -1;
 +                goto out;
 +            }
-         }
-         if (in_ret < 0) {
++        }
++        if (in_ret < 0) {
              error_report("error while reading from input image file: %s",
-@@ -5115,9 +5158,13 @@ static int img_dd(int argc, char **argv)
+-                         strerror(-ret));
++                         strerror(-in_ret));
++            ret = -1;
+             goto out;
          }
-         in_pos += in_ret;
+         in_pos += bytes;
  
--        out_ret = blk_pwrite(blk2, out_pos, in.buf, in_ret, 0);
+-        ret = blk_pwrite(blk2, out_pos, bytes, in.buf, 0);
+-        if (ret < 0) {
 +        if (blk2) {
-+            out_ret = blk_pwrite(blk2, out_pos, in.buf, in_ret, 0);
++            out_ret = blk_pwrite(blk2, out_pos, in_ret, in.buf, 0);
++            if (out_ret == 0) {
++                out_ret = in_ret;
++            }
 +        } else {
 +            out_ret = write(STDOUT_FILENO, in.buf, in_ret);
 +        }
- 
--        if (out_ret < 0) {
++
 +        if (out_ret != in_ret) {
              error_report("error while writing to output image file: %s",
-                          strerror(-out_ret));
-             ret = -1;
+-                         strerror(-ret));
++                         strerror(-out_ret));
++            ret = -1;
+             goto out;
+         }
+         out_pos += bytes;

debian/patches/pve/0010-PVE-Up-qemu-img-dd-add-isize-parameter.patch

@@ -10,15 +10,16 @@ an expected end of input.
 
 Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  qemu-img.c | 28 +++++++++++++++++++++++++---
  1 file changed, 25 insertions(+), 3 deletions(-)
 
 diff --git a/qemu-img.c b/qemu-img.c
-index 1f457d9e80..d9e8a8c4d4 100644
+index c584de648c..a57ceeddfe 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -4806,11 +4806,13 @@ static int img_bitmap(int argc, char **argv)
+@@ -4886,11 +4886,13 @@ static int img_bitmap(int argc, char **argv)
  #define C_OF      010
  #define C_SKIP    020
  #define C_OSIZE   040
@@ -32,7 +33,7 @@ index 1f457d9e80..d9e8a8c4d4 100644
  };
  
  struct DdIo {
-@@ -4899,6 +4901,19 @@ static int img_dd_osize(const char *arg,
+@@ -4979,6 +4981,19 @@ static int img_dd_osize(const char *arg,
      return 0;
  }
  
@@ -52,13 +53,13 @@ index 1f457d9e80..d9e8a8c4d4 100644
  static int img_dd(int argc, char **argv)
  {
      int ret = 0;
-@@ -4913,12 +4928,14 @@ static int img_dd(int argc, char **argv)
+@@ -4993,12 +5008,14 @@ static int img_dd(int argc, char **argv)
      int c, i;
      const char *out_fmt = "raw";
      const char *fmt = NULL;
 -    int64_t size = 0;
 +    int64_t size = 0, readsize = 0;
-     int64_t block_count = 0, out_pos, in_pos;
+     int64_t out_pos, in_pos;
      bool force_share = false;
      struct DdInfo dd = {
          .flags = 0,
@@ -68,7 +69,7 @@ index 1f457d9e80..d9e8a8c4d4 100644
      };
      struct DdIo in = {
          .bsz = 512, /* Block size is by default 512 bytes */
-@@ -4940,6 +4957,7 @@ static int img_dd(int argc, char **argv)
+@@ -5020,6 +5037,7 @@ static int img_dd(int argc, char **argv)
          { "of", img_dd_of, C_OF },
          { "skip", img_dd_skip, C_SKIP },
          { "osize", img_dd_osize, C_OSIZE },
@@ -76,20 +77,22 @@ index 1f457d9e80..d9e8a8c4d4 100644
          { NULL, NULL, 0 }
      };
      const struct option long_options[] = {
-@@ -5136,14 +5154,18 @@ static int img_dd(int argc, char **argv)
+@@ -5216,9 +5234,10 @@ static int img_dd(int argc, char **argv)
  
      in.buf = g_new(uint8_t, in.bsz);
  
--    for (out_pos = 0; in_pos < size; block_count++) {
+-    for (out_pos = 0; in_pos < size; ) {
 +    readsize = (dd.isize > 0) ? dd.isize : size;
-+    for (out_pos = 0; in_pos < readsize; block_count++) {
++    for (out_pos = 0; in_pos < readsize; ) {
          int in_ret, out_ret;
--        size_t in_bsz = in_pos + in.bsz > size ? size - in_pos : in.bsz;
-+        size_t in_bsz = in_pos + in.bsz > readsize ? readsize - in_pos : in.bsz;
+-        int bytes = (in_pos + in.bsz > size) ? size - in_pos : in.bsz;
++        int bytes = (in_pos + in.bsz > readsize) ? readsize - in_pos : in.bsz;
          if (blk1) {
-             in_ret = blk_pread(blk1, in_pos, in.buf, in_bsz);
+             in_ret = blk_pread(blk1, in_pos, bytes, in.buf, 0);
+             if (in_ret == 0) {
+@@ -5227,6 +5246,9 @@ static int img_dd(int argc, char **argv)
          } else {
-             in_ret = read(STDIN_FILENO, in.buf, in_bsz);
+             in_ret = read(STDIN_FILENO, in.buf, bytes);
              if (in_ret == 0) {
 +                if (dd.isize == 0) {
 +                    goto out;

debian/patches/pve/0011-PVE-Up-qemu-img-dd-add-n-skip_create.patch

@@ -5,7 +5,7 @@ Subject: [PATCH] PVE: [Up] qemu-img dd: add -n skip_create
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 [FE: fix getopt-string + add documentation]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  docs/tools/qemu-img.rst | 11 ++++++++++-
  qemu-img-cmds.hx        |  4 ++--
@@ -13,7 +13,7 @@ Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
  3 files changed, 26 insertions(+), 12 deletions(-)
 
 diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
-index d663dd92bd..a49badb158 100644
+index 15aeddc6d8..5e713e231d 100644
 --- a/docs/tools/qemu-img.rst
 +++ b/docs/tools/qemu-img.rst
 @@ -208,6 +208,10 @@ Parameters to convert subcommand:
@@ -49,7 +49,7 @@ index d663dd92bd..a49badb158 100644
  
    Give information about the disk image *FILENAME*. Use it in
 diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
-index 0b2999f3ab..f3b2b1b4de 100644
+index d1616c045a..b5b0bb4467 100644
 --- a/qemu-img-cmds.hx
 +++ b/qemu-img-cmds.hx
 @@ -58,9 +58,9 @@ SRST
@@ -65,19 +65,19 @@ index 0b2999f3ab..f3b2b1b4de 100644
  
  DEF("info", img_info,
 diff --git a/qemu-img.c b/qemu-img.c
-index d9e8a8c4d4..015d6d2ce4 100644
+index a57ceeddfe..06d814e39c 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -4930,7 +4930,7 @@ static int img_dd(int argc, char **argv)
+@@ -5010,7 +5010,7 @@ static int img_dd(int argc, char **argv)
      const char *fmt = NULL;
      int64_t size = 0, readsize = 0;
-     int64_t block_count = 0, out_pos, in_pos;
+     int64_t out_pos, in_pos;
 -    bool force_share = false;
 +    bool force_share = false, skip_create = false;
      struct DdInfo dd = {
          .flags = 0,
          .count = 0,
-@@ -4968,7 +4968,7 @@ static int img_dd(int argc, char **argv)
+@@ -5048,7 +5048,7 @@ static int img_dd(int argc, char **argv)
          { 0, 0, 0, 0 }
      };
  
@@ -86,7 +86,7 @@ index d9e8a8c4d4..015d6d2ce4 100644
          if (c == EOF) {
              break;
          }
-@@ -4988,6 +4988,9 @@ static int img_dd(int argc, char **argv)
+@@ -5068,6 +5068,9 @@ static int img_dd(int argc, char **argv)
          case 'h':
              help();
              break;
@@ -96,7 +96,7 @@ index d9e8a8c4d4..015d6d2ce4 100644
          case 'U':
              force_share = true;
              break;
-@@ -5118,13 +5121,15 @@ static int img_dd(int argc, char **argv)
+@@ -5198,13 +5201,15 @@ static int img_dd(int argc, char **argv)
                                  size - in.bsz * in.offset, &error_abort);
          }
  

debian/patches/pve/0012-qemu-img-dd-add-l-option-for-loading-a-snapshot.patch

@@ -1,9 +1,9 @@
 From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
 From: Fabian Ebner <f.ebner@proxmox.com>
 Date: Mon, 7 Feb 2022 14:21:01 +0100
-Subject: [PATCH] qemu-img: dd: add -l option for loading a snapshot
+Subject: [PATCH] qemu-img dd: add -l option for loading a snapshot
 
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  docs/tools/qemu-img.rst |  6 +++---
@@ -12,7 +12,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  3 files changed, 36 insertions(+), 7 deletions(-)
 
 diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
-index a49badb158..1039aec01c 100644
+index 5e713e231d..9390d5e5cf 100644
 --- a/docs/tools/qemu-img.rst
 +++ b/docs/tools/qemu-img.rst
 @@ -492,10 +492,10 @@ Command description:
@@ -30,7 +30,7 @@ index a49badb158..1039aec01c 100644
    The data is by default read and written using blocks of 512 bytes but can be
    modified by specifying *BLOCK_SIZE*. If count=\ *BLOCKS* is specified
 diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
-index f3b2b1b4de..e77ed9347f 100644
+index b5b0bb4467..36f97e1f19 100644
 --- a/qemu-img-cmds.hx
 +++ b/qemu-img-cmds.hx
 @@ -58,9 +58,9 @@ SRST
@@ -46,10 +46,10 @@ index f3b2b1b4de..e77ed9347f 100644
  
  DEF("info", img_info,
 diff --git a/qemu-img.c b/qemu-img.c
-index 015d6d2ce4..7031195e32 100644
+index 06d814e39c..e2c06c496d 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -4922,6 +4922,7 @@ static int img_dd(int argc, char **argv)
+@@ -5002,6 +5002,7 @@ static int img_dd(int argc, char **argv)
      BlockDriver *drv = NULL, *proto_drv = NULL;
      BlockBackend *blk1 = NULL, *blk2 = NULL;
      QemuOpts *opts = NULL;
@@ -57,15 +57,15 @@ index 015d6d2ce4..7031195e32 100644
      QemuOptsList *create_opts = NULL;
      Error *local_err = NULL;
      bool image_opts = false;
-@@ -4931,6 +4932,7 @@ static int img_dd(int argc, char **argv)
+@@ -5011,6 +5012,7 @@ static int img_dd(int argc, char **argv)
      int64_t size = 0, readsize = 0;
-     int64_t block_count = 0, out_pos, in_pos;
+     int64_t out_pos, in_pos;
      bool force_share = false, skip_create = false;
 +    const char *snapshot_name = NULL;
      struct DdInfo dd = {
          .flags = 0,
          .count = 0,
-@@ -4968,7 +4970,7 @@ static int img_dd(int argc, char **argv)
+@@ -5048,7 +5050,7 @@ static int img_dd(int argc, char **argv)
          { 0, 0, 0, 0 }
      };
  
@@ -74,7 +74,7 @@ index 015d6d2ce4..7031195e32 100644
          if (c == EOF) {
              break;
          }
-@@ -4991,6 +4993,19 @@ static int img_dd(int argc, char **argv)
+@@ -5071,6 +5073,19 @@ static int img_dd(int argc, char **argv)
          case 'n':
              skip_create = true;
              break;
@@ -94,7 +94,7 @@ index 015d6d2ce4..7031195e32 100644
          case 'U':
              force_share = true;
              break;
-@@ -5050,11 +5065,24 @@ static int img_dd(int argc, char **argv)
+@@ -5130,11 +5145,24 @@ static int img_dd(int argc, char **argv)
      if (dd.flags & C_IF) {
          blk1 = img_open(image_opts, in.filename, fmt, 0, false, false,
                          force_share);
@@ -120,7 +120,7 @@ index 015d6d2ce4..7031195e32 100644
      }
  
      if (dd.flags & C_OSIZE) {
-@@ -5203,6 +5231,7 @@ static int img_dd(int argc, char **argv)
+@@ -5289,6 +5317,7 @@ static int img_dd(int argc, char **argv)
  out:
      g_free(arg);
      qemu_opts_del(opts);

debian/patches/pve/0013-PVE-virtio-balloon-improve-query-balloon.patch

@@ -7,17 +7,62 @@ Actually provide memory information via the query-balloon
 command.
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: add BalloonInfo to member name exceptions list
+     rebase for 8.0 - moved to hw/core/machine-hmp-cmds.c]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
+ hw/core/machine-hmp-cmds.c | 30 +++++++++++++++++++++++++++++-
  hw/virtio/virtio-balloon.c | 33 +++++++++++++++++++++++++++++++--
- monitor/hmp-cmds.c         | 30 +++++++++++++++++++++++++++++-
  qapi/machine.json          | 22 +++++++++++++++++++++-
- 3 files changed, 81 insertions(+), 4 deletions(-)
+ qapi/pragma.json           |  1 +
+ 4 files changed, 82 insertions(+), 4 deletions(-)
 
+diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c
+index c3e55ef9e9..0e32e6201f 100644
+--- a/hw/core/machine-hmp-cmds.c
++++ b/hw/core/machine-hmp-cmds.c
+@@ -169,7 +169,35 @@ void hmp_info_balloon(Monitor *mon, const QDict *qdict)
+         return;
+     }
+ 
+-    monitor_printf(mon, "balloon: actual=%" PRId64 "\n", info->actual >> 20);
++    monitor_printf(mon, "balloon: actual=%" PRId64, info->actual >> 20);
++    monitor_printf(mon, " max_mem=%" PRId64, info->max_mem >> 20);
++    if (info->has_total_mem) {
++        monitor_printf(mon, " total_mem=%" PRId64, info->total_mem >> 20);
++    }
++    if (info->has_free_mem) {
++        monitor_printf(mon, " free_mem=%" PRId64, info->free_mem >> 20);
++    }
++
++    if (info->has_mem_swapped_in) {
++        monitor_printf(mon, " mem_swapped_in=%" PRId64, info->mem_swapped_in);
++    }
++    if (info->has_mem_swapped_out) {
++        monitor_printf(mon, " mem_swapped_out=%" PRId64, info->mem_swapped_out);
++    }
++    if (info->has_major_page_faults) {
++        monitor_printf(mon, " major_page_faults=%" PRId64,
++                       info->major_page_faults);
++    }
++    if (info->has_minor_page_faults) {
++        monitor_printf(mon, " minor_page_faults=%" PRId64,
++                       info->minor_page_faults);
++    }
++    if (info->has_last_update) {
++        monitor_printf(mon, " last_update=%" PRId64,
++                       info->last_update);
++    }
++
++    monitor_printf(mon, "\n");
+ 
+     qapi_free_BalloonInfo(info);
+ }
 diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
-index 9a4f491b54..1faa16234e 100644
+index 746f07c4d2..a41854b902 100644
 --- a/hw/virtio/virtio-balloon.c
 +++ b/hw/virtio/virtio-balloon.c
-@@ -812,8 +812,37 @@ static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
+@@ -804,8 +804,37 @@ static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
  static void virtio_balloon_stat(void *opaque, BalloonInfo *info)
  {
      VirtIOBalloon *dev = opaque;
@@ -57,52 +102,11 @@ index 9a4f491b54..1faa16234e 100644
  }
  
  static void virtio_balloon_to_target(void *opaque, ram_addr_t target)
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index 2e91ccb738..e9fa9af6bd 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -696,7 +696,35 @@ void hmp_info_balloon(Monitor *mon, const QDict *qdict)
-         return;
-     }
- 
--    monitor_printf(mon, "balloon: actual=%" PRId64 "\n", info->actual >> 20);
-+    monitor_printf(mon, "balloon: actual=%" PRId64, info->actual >> 20);
-+    monitor_printf(mon, " max_mem=%" PRId64, info->max_mem >> 20);
-+    if (info->has_total_mem) {
-+        monitor_printf(mon, " total_mem=%" PRId64, info->total_mem >> 20);
-+    }
-+    if (info->has_free_mem) {
-+        monitor_printf(mon, " free_mem=%" PRId64, info->free_mem >> 20);
-+    }
-+
-+    if (info->has_mem_swapped_in) {
-+        monitor_printf(mon, " mem_swapped_in=%" PRId64, info->mem_swapped_in);
-+    }
-+    if (info->has_mem_swapped_out) {
-+        monitor_printf(mon, " mem_swapped_out=%" PRId64, info->mem_swapped_out);
-+    }
-+    if (info->has_major_page_faults) {
-+        monitor_printf(mon, " major_page_faults=%" PRId64,
-+                       info->major_page_faults);
-+    }
-+    if (info->has_minor_page_faults) {
-+        monitor_printf(mon, " minor_page_faults=%" PRId64,
-+                       info->minor_page_faults);
-+    }
-+    if (info->has_last_update) {
-+        monitor_printf(mon, " last_update=%" PRId64,
-+                       info->last_update);
-+    }
-+
-+    monitor_printf(mon, "\n");
- 
-     qapi_free_BalloonInfo(info);
- }
 diff --git a/qapi/machine.json b/qapi/machine.json
-index 067e3f5378..91f3be6f44 100644
+index 604b686e59..15f5f86683 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -1018,10 +1018,30 @@
+@@ -1056,9 +1056,29 @@
  # @actual: the logical size of the VM in bytes
  #          Formula used: logical_vm_size = vm_ram_size - balloon_size
  #
@@ -123,7 +127,6 @@ index 067e3f5378..91f3be6f44 100644
 +# @max_mem: amount of memory (in bytes) assigned to the guest
 +#
  # Since: 0.14
- #
  ##
 -{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
 +{ 'struct': 'BalloonInfo',
@@ -134,3 +137,15 @@ index 067e3f5378..91f3be6f44 100644
  
  ##
  # @query-balloon:
+diff --git a/qapi/pragma.json b/qapi/pragma.json
+index 7f810b0e97..325e684411 100644
+--- a/qapi/pragma.json
++++ b/qapi/pragma.json
+@@ -35,6 +35,7 @@
+     'member-name-exceptions': [     # visible in:
+         'ACPISlotType',             # query-acpi-ospm-status
+         'AcpiTableOptions',         # -acpitable
++        'BalloonInfo',              # query-balloon
+         'BlkdebugEvent',            # blockdev-add, -blockdev
+         'BlkdebugSetStateOptions',  # blockdev-add, -blockdev
+         'BlockDeviceInfo',          # query-block

debian/patches/pve/0014-PVE-qapi-modify-query-machines.patch

@@ -13,13 +13,13 @@ Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
  2 files changed, 9 insertions(+), 1 deletion(-)
 
 diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c
-index 4f4ab30f8c..76fff60a6b 100644
+index b98ff15089..24595f618c 100644
 --- a/hw/core/machine-qmp-cmds.c
 +++ b/hw/core/machine-qmp-cmds.c
-@@ -99,6 +99,12 @@ MachineInfoList *qmp_query_machines(Error **errp)
-         info->hotpluggable_cpus = mc->has_hotpluggable_cpus;
+@@ -103,6 +103,12 @@ MachineInfoList *qmp_query_machines(Error **errp)
          info->numa_mem_supported = mc->numa_mem_supported;
          info->deprecated = !!mc->deprecation_reason;
+         info->acpi = !!object_class_property_find(OBJECT_CLASS(mc), "acpi");
 +
 +        if (strcmp(mc->name, MACHINE_GET_CLASS(current_machine)->name) == 0) {
 +            info->has_is_current = true;
@@ -28,12 +28,12 @@ index 4f4ab30f8c..76fff60a6b 100644
 +
          if (mc->default_cpu_type) {
              info->default_cpu_type = g_strdup(mc->default_cpu_type);
-             info->has_default_cpu_type = true;
+         }
 diff --git a/qapi/machine.json b/qapi/machine.json
-index 91f3be6f44..0905618e25 100644
+index 15f5f86683..c904280085 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -141,6 +141,8 @@
+@@ -138,6 +138,8 @@
  #
  # @is-default: whether the machine is default
  #
@@ -42,7 +42,7 @@ index 91f3be6f44..0905618e25 100644
  # @cpu-max: maximum number of CPUs supported by the machine type
  #           (since 1.5)
  #
-@@ -162,7 +164,7 @@
+@@ -161,7 +163,7 @@
  ##
  { 'struct': 'MachineInfo',
    'data': { 'name': 'str', '*alias': 'str',
@@ -50,4 +50,4 @@ index 91f3be6f44..0905618e25 100644
 +            '*is-default': 'bool', '*is-current': 'bool', 'cpu-max': 'int',
              'hotpluggable-cpus': 'bool',  'numa-mem-supported': 'bool',
              'deprecated': 'bool', '*default-cpu-type': 'str',
-             '*default-ram-id': 'str' } }
+             '*default-ram-id': 'str', 'acpi': 'bool' } }

debian/patches/pve/0015-PVE-qapi-modify-spice-query.patch

@@ -6,16 +6,18 @@ Subject: [PATCH] PVE: qapi: modify spice query
 Provide the last ticket in the SpiceInfo struct optionally.
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to QAPI change]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  qapi/ui.json    | 3 +++
- ui/spice-core.c | 5 +++++
- 2 files changed, 8 insertions(+)
+ ui/spice-core.c | 4 ++++
+ 2 files changed, 7 insertions(+)
 
 diff --git a/qapi/ui.json b/qapi/ui.json
-index 4244c62c30..f946fbd8c1 100644
+index 98322342f7..316d4dc933 100644
 --- a/qapi/ui.json
 +++ b/qapi/ui.json
-@@ -333,11 +333,14 @@
+@@ -310,11 +310,14 @@
  #
  # @channels: a list of @SpiceChannel for each active spice channel
  #
@@ -31,15 +33,14 @@ index 4244c62c30..f946fbd8c1 100644
    'if': 'CONFIG_SPICE' }
  
 diff --git a/ui/spice-core.c b/ui/spice-core.c
-index a3acdbd682..756776778d 100644
+index b20c25aee0..26baeb7846 100644
 --- a/ui/spice-core.c
 +++ b/ui/spice-core.c
-@@ -534,6 +534,11 @@ static SpiceInfo *qmp_query_spice_real(Error **errp)
+@@ -548,6 +548,10 @@ static SpiceInfo *qmp_query_spice_real(Error **errp)
      micro = SPICE_SERVER_VERSION & 0xff;
      info->compiled_version = g_strdup_printf("%d.%d.%d", major, minor, micro);
  
 +    if (auth_passwd) {
-+        info->has_ticket = true;
 +        info->ticket =  g_strdup(auth_passwd);
 +    }
 +

debian/patches/pve/0016-PVE-add-IOChannel-implementation-for-savevm-async.patch

@@ -0,0 +1,282 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 13 Oct 2022 11:33:50 +0200
+Subject: [PATCH] PVE: add IOChannel implementation for savevm-async
+
+based on migration/channel-block.c and the implementation that was
+present in migration/savevm-async.c before QEMU 7.1.
+
+Passes along read/write requests to the given BlockBackend, while
+ensuring that a read request going beyond the end results in a
+graceful short read.
+
+Additionally, allows tracking the current position from the outside
+(intended to be used for progress tracking).
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ migration/channel-savevm-async.c | 183 +++++++++++++++++++++++++++++++
+ migration/channel-savevm-async.h |  51 +++++++++
+ migration/meson.build            |   1 +
+ 3 files changed, 235 insertions(+)
+ create mode 100644 migration/channel-savevm-async.c
+ create mode 100644 migration/channel-savevm-async.h
+
+diff --git a/migration/channel-savevm-async.c b/migration/channel-savevm-async.c
+new file mode 100644
+index 0000000000..aab081ce07
+--- /dev/null
++++ b/migration/channel-savevm-async.c
+@@ -0,0 +1,183 @@
++/*
++ * QIO Channel implementation to be used by savevm-async QMP calls
++ */
++#include "qemu/osdep.h"
++#include "migration/channel-savevm-async.h"
++#include "qapi/error.h"
++#include "sysemu/block-backend.h"
++#include "trace.h"
++
++QIOChannelSavevmAsync *
++qio_channel_savevm_async_new(BlockBackend *be, size_t *bs_pos)
++{
++    QIOChannelSavevmAsync *ioc;
++
++    ioc = QIO_CHANNEL_SAVEVM_ASYNC(object_new(TYPE_QIO_CHANNEL_SAVEVM_ASYNC));
++
++    bdrv_ref(blk_bs(be));
++    ioc->be = be;
++    ioc->bs_pos = bs_pos;
++
++    return ioc;
++}
++
++
++static void
++qio_channel_savevm_async_finalize(Object *obj)
++{
++    QIOChannelSavevmAsync *ioc = QIO_CHANNEL_SAVEVM_ASYNC(obj);
++
++    if (ioc->be) {
++        bdrv_unref(blk_bs(ioc->be));
++        ioc->be = NULL;
++    }
++    ioc->bs_pos = NULL;
++}
++
++
++static ssize_t
++qio_channel_savevm_async_readv(QIOChannel *ioc,
++                               const struct iovec *iov,
++                               size_t niov,
++                               int **fds,
++                               size_t *nfds,
++                               int flags,
++                               Error **errp)
++{
++    QIOChannelSavevmAsync *saioc = QIO_CHANNEL_SAVEVM_ASYNC(ioc);
++    BlockBackend *be = saioc->be;
++    int64_t maxlen = blk_getlength(be);
++    QEMUIOVector qiov;
++    size_t size;
++    int ret;
++
++    qemu_iovec_init_external(&qiov, (struct iovec *)iov, niov);
++
++    if (*saioc->bs_pos >= maxlen) {
++        error_setg(errp, "cannot read beyond maxlen");
++        return -1;
++    }
++
++    if (maxlen - *saioc->bs_pos < qiov.size) {
++        size = maxlen - *saioc->bs_pos;
++    } else {
++        size = qiov.size;
++    }
++
++    // returns 0 on success
++    ret = blk_preadv(be, *saioc->bs_pos, size, &qiov, 0);
++    if (ret < 0) {
++        error_setg_errno(errp, -ret, "blk_preadv failed");
++        return -1;
++    }
++
++    *saioc->bs_pos += size;
++    return size;
++}
++
++
++static ssize_t
++qio_channel_savevm_async_writev(QIOChannel *ioc,
++                                const struct iovec *iov,
++                                size_t niov,
++                                int *fds,
++                                size_t nfds,
++                                int flags,
++                                Error **errp)
++{
++    QIOChannelSavevmAsync *saioc = QIO_CHANNEL_SAVEVM_ASYNC(ioc);
++    BlockBackend *be = saioc->be;
++    QEMUIOVector qiov;
++    int ret;
++
++    qemu_iovec_init_external(&qiov, (struct iovec *)iov, niov);
++
++    if (qemu_in_coroutine()) {
++        ret = blk_co_pwritev(be, *saioc->bs_pos, qiov.size, &qiov, 0);
++        aio_wait_kick();
++    } else {
++        ret = blk_pwritev(be, *saioc->bs_pos, qiov.size, &qiov, 0);
++    }
++
++    if (ret < 0) {
++        error_setg_errno(errp, -ret, "blk(_co)_pwritev failed");
++        return -1;
++    }
++
++    *saioc->bs_pos += qiov.size;
++    return qiov.size;
++}
++
++
++static int
++qio_channel_savevm_async_set_blocking(QIOChannel *ioc,
++                                      bool enabled,
++                                      Error **errp)
++{
++    if (!enabled) {
++        error_setg(errp, "Non-blocking mode not supported for savevm-async");
++        return -1;
++    }
++    return 0;
++}
++
++
++static int
++qio_channel_savevm_async_close(QIOChannel *ioc,
++                               Error **errp)
++{
++    QIOChannelSavevmAsync *saioc = QIO_CHANNEL_SAVEVM_ASYNC(ioc);
++    int rv = bdrv_flush(blk_bs(saioc->be));
++
++    if (rv < 0) {
++        error_setg_errno(errp, -rv, "Unable to flush VMState");
++        return -1;
++    }
++
++    bdrv_unref(blk_bs(saioc->be));
++    saioc->be = NULL;
++    saioc->bs_pos = NULL;
++
++    return 0;
++}
++
++
++static void
++qio_channel_savevm_async_set_aio_fd_handler(QIOChannel *ioc,
++                                            AioContext *ctx,
++                                            IOHandler *io_read,
++                                            IOHandler *io_write,
++                                            void *opaque)
++{
++    // if channel-block starts doing something, check if this needs adaptation
++}
++
++
++static void
++qio_channel_savevm_async_class_init(ObjectClass *klass,
++                             void *class_data G_GNUC_UNUSED)
++{
++    QIOChannelClass *ioc_klass = QIO_CHANNEL_CLASS(klass);
++
++    ioc_klass->io_writev = qio_channel_savevm_async_writev;
++    ioc_klass->io_readv = qio_channel_savevm_async_readv;
++    ioc_klass->io_set_blocking = qio_channel_savevm_async_set_blocking;
++    ioc_klass->io_close = qio_channel_savevm_async_close;
++    ioc_klass->io_set_aio_fd_handler = qio_channel_savevm_async_set_aio_fd_handler;
++}
++
++static const TypeInfo qio_channel_savevm_async_info = {
++    .parent = TYPE_QIO_CHANNEL,
++    .name = TYPE_QIO_CHANNEL_SAVEVM_ASYNC,
++    .instance_size = sizeof(QIOChannelSavevmAsync),
++    .instance_finalize = qio_channel_savevm_async_finalize,
++    .class_init = qio_channel_savevm_async_class_init,
++};
++
++static void
++qio_channel_savevm_async_register_types(void)
++{
++    type_register_static(&qio_channel_savevm_async_info);
++}
++
++type_init(qio_channel_savevm_async_register_types);
+diff --git a/migration/channel-savevm-async.h b/migration/channel-savevm-async.h
+new file mode 100644
+index 0000000000..17ae2cb261
+--- /dev/null
++++ b/migration/channel-savevm-async.h
+@@ -0,0 +1,51 @@
++/*
++ * QEMU I/O channels driver for savevm-async.c
++ *
++ * Copyright (c) 2022 Proxmox Server Solutions
++ *
++ * Authors:
++ *  Fiona Ebner (f.ebner@proxmox.com)
++ *
++ * This work is licensed under the terms of the GNU GPL, version 2 or later.
++ * See the COPYING file in the top-level directory.
++ */
++
++#ifndef QIO_CHANNEL_SAVEVM_ASYNC_H
++#define QIO_CHANNEL_SAVEVM_ASYNC_H
++
++#include "io/channel.h"
++#include "qom/object.h"
++
++#define TYPE_QIO_CHANNEL_SAVEVM_ASYNC "qio-channel-savevm-async"
++OBJECT_DECLARE_SIMPLE_TYPE(QIOChannelSavevmAsync, QIO_CHANNEL_SAVEVM_ASYNC)
++
++
++/**
++ * QIOChannelSavevmAsync:
++ *
++ * The QIOChannelBlock object provides a channel implementation that is able to
++ * perform I/O on any BlockBackend whose BlockDriverState directly contains a
++ * VMState (as opposed to indirectly, like qcow2). It allows tracking the
++ * current position from the outside.
++ */
++struct QIOChannelSavevmAsync {
++    QIOChannel parent;
++    BlockBackend *be;
++    size_t *bs_pos;
++};
++
++
++/**
++ * qio_channel_savevm_async_new:
++ * @be: the block backend
++ * @bs_pos: used to keep track of the IOChannels current position
++ *
++ * Create a new IO channel object that can perform I/O on a BlockBackend object
++ * whose BlockDriverState directly contains a VMState.
++ *
++ * Returns: the new channel object
++ */
++QIOChannelSavevmAsync *
++qio_channel_savevm_async_new(BlockBackend *be, size_t *bs_pos);
++
++#endif /* QIO_CHANNEL_SAVEVM_ASYNC_H */
+diff --git a/migration/meson.build b/migration/meson.build
+index 0d1bb9f96e..8a142fc7a9 100644
+--- a/migration/meson.build
++++ b/migration/meson.build
+@@ -13,6 +13,7 @@ softmmu_ss.add(files(
+   'block-dirty-bitmap.c',
+   'channel.c',
+   'channel-block.c',
++  'channel-savevm-async.c',
+   'colo-failover.c',
+   'colo.c',
+   'exec.c',

debian/patches/pve/0017-PVE-add-savevm-async-for-background-state-snapshots.patch

@@ -21,28 +21,34 @@ still opened by QEMU.
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
 Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
-[improve aborting]
+[SR: improve aborting
+     register yank before migration_incoming_state_destroy]
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+[FE: further improve aborting
+     adapt to removal of QEMUFileOps
+     improve condition for entering final stage
+     adapt to QAPI and other changes for 8.0]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  hmp-commands-info.hx         |  13 +
- hmp-commands.hx              |  33 ++
+ hmp-commands.hx              |  17 ++
  include/migration/snapshot.h |   2 +
- include/monitor/hmp.h        |   5 +
+ include/monitor/hmp.h        |   3 +
  migration/meson.build        |   1 +
- migration/savevm-async.c     | 598 +++++++++++++++++++++++++++++++++++
- monitor/hmp-cmds.c           |  57 ++++
- qapi/migration.json          |  34 ++
- qapi/misc.json               |  32 ++
+ migration/savevm-async.c     | 533 +++++++++++++++++++++++++++++++++++
+ monitor/hmp-cmds.c           |  38 +++
+ qapi/migration.json          |  34 +++
+ qapi/misc.json               |  16 ++
  qemu-options.hx              |  12 +
  softmmu/vl.c                 |  10 +
- 11 files changed, 797 insertions(+)
+ 11 files changed, 679 insertions(+)
  create mode 100644 migration/savevm-async.c
 
 diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
-index 407a1da800..245f8acc55 100644
+index 47d63d26db..a166bff3d5 100644
 --- a/hmp-commands-info.hx
 +++ b/hmp-commands-info.hx
-@@ -536,6 +536,19 @@ SRST
+@@ -540,6 +540,19 @@ SRST
      Show current migration parameters.
  ERST
  
@@ -63,13 +69,13 @@ index 407a1da800..245f8acc55 100644
          .name       = "balloon",
          .args_type  = "",
 diff --git a/hmp-commands.hx b/hmp-commands.hx
-index 5efb47fc32..1ad13b668b 100644
+index bb85ee1d26..d9f9f42d11 100644
 --- a/hmp-commands.hx
 +++ b/hmp-commands.hx
-@@ -1746,3 +1746,36 @@ ERST
-                       "\n\t\t\t -b to specify dirty bitmap as method of calculation)",
-         .cmd        = hmp_calc_dirty_rate,
-     },
+@@ -1846,3 +1846,20 @@ SRST
+   List event channels in the guest
+ ERST
+ #endif
 +
 +    {
 +        .name       = "savevm-start",
@@ -80,22 +86,6 @@ index 5efb47fc32..1ad13b668b 100644
 +    },
 +
 +    {
-+        .name       = "snapshot-drive",
-+        .args_type  = "device:s,name:s",
-+        .params     = "device name",
-+        .help       = "Create internal snapshot.",
-+        .cmd = hmp_snapshot_drive,
-+    },
-+
-+    {
-+        .name       = "delete-drive-snapshot",
-+        .args_type  = "device:s,name:s",
-+        .params     = "device name",
-+        .help       = "Delete internal snapshot.",
-+        .cmd = hmp_delete_drive_snapshot,
-+    },
-+
-+    {
 +        .name       = "savevm-end",
 +        .args_type  = "",
 +        .params     = "",
@@ -115,10 +105,10 @@ index e72083b117..c846d37806 100644
 +
  #endif
 diff --git a/include/monitor/hmp.h b/include/monitor/hmp.h
-index 96d014826a..3a39ba41b5 100644
+index fdb69b7f9c..fdf6b45fb8 100644
 --- a/include/monitor/hmp.h
 +++ b/include/monitor/hmp.h
-@@ -26,6 +26,7 @@ void hmp_info_status(Monitor *mon, const QDict *qdict);
+@@ -28,6 +28,7 @@ void hmp_info_status(Monitor *mon, const QDict *qdict);
  void hmp_info_uuid(Monitor *mon, const QDict *qdict);
  void hmp_info_chardev(Monitor *mon, const QDict *qdict);
  void hmp_info_mice(Monitor *mon, const QDict *qdict);
@@ -126,36 +116,35 @@ index 96d014826a..3a39ba41b5 100644
  void hmp_info_migrate(Monitor *mon, const QDict *qdict);
  void hmp_info_migrate_capabilities(Monitor *mon, const QDict *qdict);
  void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict);
-@@ -80,6 +81,10 @@ void hmp_netdev_add(Monitor *mon, const QDict *qdict);
- void hmp_netdev_del(Monitor *mon, const QDict *qdict);
- void hmp_getfd(Monitor *mon, const QDict *qdict);
- void hmp_closefd(Monitor *mon, const QDict *qdict);
+@@ -94,6 +95,8 @@ void hmp_closefd(Monitor *mon, const QDict *qdict);
+ void hmp_mouse_move(Monitor *mon, const QDict *qdict);
+ void hmp_mouse_button(Monitor *mon, const QDict *qdict);
+ void hmp_mouse_set(Monitor *mon, const QDict *qdict);
 +void hmp_savevm_start(Monitor *mon, const QDict *qdict);
-+void hmp_snapshot_drive(Monitor *mon, const QDict *qdict);
-+void hmp_delete_drive_snapshot(Monitor *mon, const QDict *qdict);
 +void hmp_savevm_end(Monitor *mon, const QDict *qdict);
  void hmp_sendkey(Monitor *mon, const QDict *qdict);
- void hmp_screendump(Monitor *mon, const QDict *qdict);
+ void coroutine_fn hmp_screendump(Monitor *mon, const QDict *qdict);
  void hmp_chardev_add(Monitor *mon, const QDict *qdict);
 diff --git a/migration/meson.build b/migration/meson.build
-index f8714dcb15..ea9aedeefc 100644
+index 8a142fc7a9..a7824b5266 100644
 --- a/migration/meson.build
 +++ b/migration/meson.build
-@@ -23,6 +23,7 @@ softmmu_ss.add(files(
+@@ -25,6 +25,7 @@ softmmu_ss.add(files(
    'multifd-zlib.c',
    'postcopy-ram.c',
    'savevm.c',
 +  'savevm-async.c',
    'socket.c',
    'tls.c',
- ), gnutls)
+   'threadinfo.c',
 diff --git a/migration/savevm-async.c b/migration/savevm-async.c
 new file mode 100644
-index 0000000000..79a0cda906
+index 0000000000..ac1fac6378
 --- /dev/null
 +++ b/migration/savevm-async.c
-@@ -0,0 +1,598 @@
+@@ -0,0 +1,533 @@
 +#include "qemu/osdep.h"
++#include "migration/channel-savevm-async.h"
 +#include "migration/migration.h"
 +#include "migration/savevm.h"
 +#include "migration/snapshot.h"
@@ -176,12 +165,10 @@ index 0000000000..79a0cda906
 +#include "qemu/timer.h"
 +#include "qemu/main-loop.h"
 +#include "qemu/rcu.h"
++#include "qemu/yank.h"
 +
 +/* #define DEBUG_SAVEVM_STATE */
 +
-+/* used while emulated sync operation in progress */
-+#define NOT_DONE -EINPROGRESS
-+
 +#ifdef DEBUG_SAVEVM_STATE
 +#define DPRINTF(fmt, ...) \
 +    do { printf("savevm-async: " fmt, ## __VA_ARGS__); } while (0)
@@ -210,7 +197,7 @@ index 0000000000..79a0cda906
 +    int64_t total_time;
 +    QEMUBH *finalize_bh;
 +    Coroutine *co;
-+    QemuCoSleep *target_close_wait;
++    QemuCoSleep target_close_wait;
 +} snap_state;
 +
 +static bool savevm_aborted(void)
@@ -229,24 +216,20 @@ index 0000000000..79a0cda906
 +        info->bytes = s->bs_pos;
 +        switch (s->state) {
 +        case SAVE_STATE_ERROR:
-+            info->has_status = true;
 +            info->status = g_strdup("failed");
 +            info->has_total_time = true;
 +            info->total_time = s->total_time;
 +            if (s->error) {
-+                info->has_error = true;
 +                info->error = g_strdup(error_get_pretty(s->error));
 +            }
 +            break;
 +        case SAVE_STATE_ACTIVE:
-+            info->has_status = true;
 +            info->status = g_strdup("active");
 +            info->has_total_time = true;
 +            info->total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME)
 +                - s->total_time;
 +            break;
 +        case SAVE_STATE_COMPLETED:
-+            info->has_status = true;
 +            info->status = g_strdup("completed");
 +            info->has_total_time = true;
 +            info->total_time = s->total_time;
@@ -268,6 +251,7 @@ index 0000000000..79a0cda906
 +
 +    if (snap_state.file) {
 +        ret = qemu_fclose(snap_state.file);
++        snap_state.file = NULL;
 +    }
 +
 +    if (snap_state.target) {
@@ -285,9 +269,7 @@ index 0000000000..79a0cda906
 +        blk_unref(snap_state.target);
 +        snap_state.target = NULL;
 +
-+        if (snap_state.target_close_wait) {
-+            qemu_co_sleep_wake(snap_state.target_close_wait);
-+        }
++        qemu_co_sleep_wake(&snap_state.target_close_wait);
 +    }
 +
 +    return ret;
@@ -313,60 +295,6 @@ index 0000000000..79a0cda906
 +    snap_state.state = SAVE_STATE_ERROR;
 +}
 +
-+static int block_state_close(void *opaque, Error **errp)
-+{
-+    snap_state.file = NULL;
-+    return blk_flush(snap_state.target);
-+}
-+
-+typedef struct BlkRwCo {
-+    int64_t offset;
-+    QEMUIOVector *qiov;
-+    ssize_t ret;
-+} BlkRwCo;
-+
-+static void coroutine_fn block_state_write_entry(void *opaque) {
-+    BlkRwCo *rwco = opaque;
-+    rwco->ret = blk_co_pwritev(snap_state.target, rwco->offset, rwco->qiov->size,
-+                               rwco->qiov, 0);
-+    aio_wait_kick();
-+}
-+
-+static ssize_t block_state_writev_buffer(void *opaque, struct iovec *iov,
-+                                         int iovcnt, int64_t pos, Error **errp)
-+{
-+    QEMUIOVector qiov;
-+    BlkRwCo rwco;
-+
-+    assert(pos == snap_state.bs_pos);
-+    rwco = (BlkRwCo) {
-+        .offset = pos,
-+        .qiov = &qiov,
-+        .ret = NOT_DONE,
-+    };
-+
-+    qemu_iovec_init_external(&qiov, iov, iovcnt);
-+
-+    if (qemu_in_coroutine()) {
-+        block_state_write_entry(&rwco);
-+    } else {
-+        Coroutine *co = qemu_coroutine_create(&block_state_write_entry, &rwco);
-+        bdrv_coroutine_enter(blk_bs(snap_state.target), co);
-+        BDRV_POLL_WHILE(blk_bs(snap_state.target), rwco.ret == NOT_DONE);
-+    }
-+    if (rwco.ret < 0) {
-+        return rwco.ret;
-+    }
-+
-+    snap_state.bs_pos += qiov.size;
-+    return qiov.size;
-+}
-+
-+static const QEMUFileOps block_file_ops = {
-+    .writev_buffer =  block_state_writev_buffer,
-+    .close =          block_state_close,
-+};
-+
 +static void process_savevm_finalize(void *opaque)
 +{
 +    int ret;
@@ -401,7 +329,7 @@ index 0000000000..79a0cda906
 +        (void)qemu_savevm_state_complete_precopy(snap_state.file, false, false);
 +        ret = qemu_file_get_error(snap_state.file);
 +        if (ret < 0) {
-+                save_snapshot_error("qemu_savevm_state_iterate error %d", ret);
++            save_snapshot_error("qemu_savevm_state_complete_precopy error %d", ret);
 +        }
 +    }
 +
@@ -422,8 +350,11 @@ index 0000000000..79a0cda906
 +    } else if (snap_state.state == SAVE_STATE_ACTIVE) {
 +        snap_state.state = SAVE_STATE_COMPLETED;
 +    } else if (aborted) {
-+        save_snapshot_error("process_savevm_cleanup: found aborted state: %d",
-+                            snap_state.state);
++        /*
++         * If there was an error, there's no need to set a new one here.
++         * If the snapshot was canceled, leave setting the state to
++         * qmp_savevm_end(), which is waked by save_snapshot_cleanup().
++         */
 +    } else {
 +        save_snapshot_error("process_savevm_cleanup: invalid state: %d",
 +                            snap_state.state);
@@ -455,18 +386,32 @@ index 0000000000..79a0cda906
 +    }
 +
 +    while (snap_state.state == SAVE_STATE_ACTIVE) {
-+        uint64_t pending_size, pend_precopy, pend_compatible, pend_postcopy;
++        uint64_t pending_size, pend_precopy, pend_postcopy;
++        uint64_t threshold = 400 * 1000;
 +
-+        /* pending is expected to be called without iothread lock */
++        /*
++         * pending_{estimate,exact} are expected to be called without iothread
++         * lock. Similar to what is done in migration.c, call the exact variant
++         * only once pend_precopy in the estimate is below the threshold.
++         */
 +        qemu_mutex_unlock_iothread();
-+        qemu_savevm_state_pending(snap_state.file, 0, &pend_precopy, &pend_compatible, &pend_postcopy);
++        qemu_savevm_state_pending_estimate(&pend_precopy, &pend_postcopy);
++        if (pend_precopy <= threshold) {
++            qemu_savevm_state_pending_exact(&pend_precopy, &pend_postcopy);
++        }
 +        qemu_mutex_lock_iothread();
++        pending_size = pend_precopy + pend_postcopy;
 +
-+        pending_size = pend_precopy + pend_compatible + pend_postcopy;
++        /*
++         * A guest reaching this cutoff is dirtying lots of RAM. It should be
++         * large enough so that the guest can't dirty this much between the
++         * check and the guest actually being stopped, but it should be small
++         * enough to avoid long downtimes for non-hibernation snapshots.
++         */
++        maxlen = blk_getlength(snap_state.target) - 100*1024*1024;
 +
-+        maxlen = blk_getlength(snap_state.target) - 30*1024*1024;
-+
-+        if (pending_size > 400000 && snap_state.bs_pos + pending_size < maxlen) {
++        /* Note that there is no progress for pend_postcopy when iterating */
++        if (pend_precopy > threshold && snap_state.bs_pos + pending_size < maxlen) {
 +            ret = qemu_savevm_state_iterate(snap_state.file, false);
 +            if (ret < 0) {
 +                save_snapshot_error("qemu_savevm_state_iterate error %d", ret);
@@ -508,7 +453,9 @@ index 0000000000..79a0cda906
 +        if (bs_ctx != qemu_get_aio_context()) {
 +            DPRINTF("savevm: async flushing drive %s\n", bs->filename);
 +            aio_co_reschedule_self(bs_ctx);
++            bdrv_graph_co_rdlock();
 +            bdrv_flush(bs);
++            bdrv_graph_co_rdunlock();
 +            aio_co_reschedule_self(qemu_get_aio_context());
 +        }
 +    }
@@ -519,7 +466,7 @@ index 0000000000..79a0cda906
 +    qemu_bh_schedule(snap_state.finalize_bh);
 +}
 +
-+void qmp_savevm_start(bool has_statefile, const char *statefile, Error **errp)
++void qmp_savevm_start(const char *statefile, Error **errp)
 +{
 +    Error *local_err = NULL;
 +    MigrationState *ms = migrate_get_current();
@@ -549,13 +496,14 @@ index 0000000000..79a0cda906
 +    snap_state.bs_pos = 0;
 +    snap_state.total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
 +    snap_state.blocker = NULL;
++    snap_state.target_close_wait = (QemuCoSleep){ .to_wake = NULL };
 +
 +    if (snap_state.error) {
 +        error_free(snap_state.error);
 +        snap_state.error = NULL;
 +    }
 +
-+    if (!has_statefile) {
++    if (!statefile) {
 +        vm_stop(RUN_STATE_SAVE_VM);
 +        snap_state.state = SAVE_STATE_COMPLETED;
 +        return;
@@ -575,7 +523,9 @@ index 0000000000..79a0cda906
 +        goto restart;
 +    }
 +
-+    snap_state.file = qemu_fopen_ops(&snap_state, &block_file_ops);
++    QIOChannel *ioc = QIO_CHANNEL(qio_channel_savevm_async_new(snap_state.target,
++                                                               &snap_state.bs_pos));
++    snap_state.file = qemu_file_new_output(ioc);
 +
 +    if (!snap_state.file) {
 +        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "failed to open '%s'", statefile);
@@ -589,6 +539,7 @@ index 0000000000..79a0cda906
 +     */
 +    migrate_init(ms);
 +    memset(&ram_counters, 0, sizeof(ram_counters));
++    memset(&compression_counters, 0, sizeof(compression_counters));
 +    ms->to_dst_file = snap_state.file;
 +
 +    error_setg(&snap_state.blocker, "block device is in use by savevm");
@@ -653,9 +604,8 @@ index 0000000000..79a0cda906
 +     * call exits the statefile will be closed and can be removed immediately */
 +    DPRINTF("savevm-end: waiting for cleanup\n");
 +    timeout = 30L * 1000 * 1000 * 1000;
-+    qemu_co_sleep_ns_wakeable(snap_state.target_close_wait,
++    qemu_co_sleep_ns_wakeable(&snap_state.target_close_wait,
 +                              QEMU_CLOCK_REALTIME, timeout);
-+    snap_state.target_close_wait = NULL;
 +    if (snap_state.target) {
 +        save_snapshot_error("timeout waiting for target file close in "
 +                            "qmp_savevm_end");
@@ -664,46 +614,14 @@ index 0000000000..79a0cda906
 +        return;
 +    }
 +
++    // File closed and no other error, so ensure next snapshot can be started.
++    if (snap_state.state != SAVE_STATE_ERROR) {
++        snap_state.state = SAVE_STATE_DONE;
++    }
++
 +    DPRINTF("savevm-end: cleanup done\n");
 +}
 +
-+// FIXME: Deprecated
-+void qmp_snapshot_drive(const char *device, const char *name, Error **errp)
-+{
-+    // Compatibility to older qemu-server.
-+    qmp_blockdev_snapshot_internal_sync(device, name, errp);
-+}
-+
-+// FIXME: Deprecated
-+void qmp_delete_drive_snapshot(const char *device, const char *name,
-+                               Error **errp)
-+{
-+    // Compatibility to older qemu-server.
-+    (void)qmp_blockdev_snapshot_delete_internal_sync(device, false, NULL,
-+                                                     true, name, errp);
-+}
-+
-+static ssize_t loadstate_get_buffer(void *opaque, uint8_t *buf, int64_t pos,
-+                                    size_t size, Error **errp)
-+{
-+    BlockBackend *be = opaque;
-+    int64_t maxlen = blk_getlength(be);
-+    if (pos > maxlen) {
-+        return -EIO;
-+    }
-+    if ((pos + size) > maxlen) {
-+        size = maxlen - pos - 1;
-+    }
-+    if (size == 0) {
-+        return 0;
-+    }
-+    return blk_pread(be, pos, buf, size);
-+}
-+
-+static const QEMUFileOps loadstate_file_ops = {
-+    .get_buffer = loadstate_get_buffer,
-+};
-+
 +int load_snapshot_from_blockdev(const char *filename, Error **errp)
 +{
 +    BlockBackend *be;
@@ -711,6 +629,7 @@ index 0000000000..79a0cda906
 +    Error *blocker = NULL;
 +
 +    QEMUFile *f;
++    size_t bs_pos = 0;
 +    int ret = -EINVAL;
 +
 +    be = blk_new_open(filename, NULL, NULL, 0, &local_err);
@@ -724,7 +643,7 @@ index 0000000000..79a0cda906
 +    blk_op_block_all(be, blocker);
 +
 +    /* restore the VM state */
-+    f = qemu_fopen_ops(be, &loadstate_file_ops);
++    f = qemu_file_new_input(QIO_CHANNEL(qio_channel_savevm_async_new(be, &bs_pos)));
 +    if (!f) {
 +        error_setg(errp, "Could not open VM state file");
 +        goto the_end;
@@ -737,6 +656,10 @@ index 0000000000..79a0cda906
 +    dirty_bitmap_mig_before_vm_start();
 +
 +    qemu_fclose(f);
++
++    /* state_destroy assumes a real migration which would have added a yank */
++    yank_register_instance(MIGRATION_YANK_INSTANCE, &error_abort);
++
 +    migration_incoming_state_destroy();
 +    if (ret < 0) {
 +        error_setg_errno(errp, -ret, "Error while loading VM state");
@@ -754,39 +677,28 @@ index 0000000000..79a0cda906
 +    return ret;
 +}
 diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index e9fa9af6bd..5000ce39d1 100644
+index 6c559b48c8..91be698308 100644
 --- a/monitor/hmp-cmds.c
 +++ b/monitor/hmp-cmds.c
-@@ -1903,6 +1903,63 @@ void hmp_info_memory_devices(Monitor *mon, const QDict *qdict)
-     hmp_handle_error(mon, err);
- }
+@@ -22,6 +22,7 @@
+ #include "monitor/monitor-internal.h"
+ #include "qapi/error.h"
+ #include "qapi/qapi-commands-control.h"
++#include "qapi/qapi-commands-migration.h"
+ #include "qapi/qapi-commands-misc.h"
+ #include "qapi/qmp/qdict.h"
+ #include "qapi/qmp/qerror.h"
+@@ -443,3 +444,40 @@ void hmp_info_mtree(Monitor *mon, const QDict *qdict)
  
+     mtree_info(flatview, dispatch_tree, owner, disabled);
+ }
++
 +void hmp_savevm_start(Monitor *mon, const QDict *qdict)
 +{
 +    Error *errp = NULL;
 +    const char *statefile = qdict_get_try_str(qdict, "statefile");
 +
-+    qmp_savevm_start(statefile != NULL, statefile, &errp);
-+    hmp_handle_error(mon, errp);
-+}
-+
-+void hmp_snapshot_drive(Monitor *mon, const QDict *qdict)
-+{
-+    Error *errp = NULL;
-+    const char *name = qdict_get_str(qdict, "name");
-+    const char *device = qdict_get_str(qdict, "device");
-+
-+    qmp_snapshot_drive(device, name, &errp);
-+    hmp_handle_error(mon, errp);
-+}
-+
-+void hmp_delete_drive_snapshot(Monitor *mon, const QDict *qdict)
-+{
-+    Error *errp = NULL;
-+    const char *name = qdict_get_str(qdict, "name");
-+    const char *device = qdict_get_str(qdict, "device");
-+
-+    qmp_delete_drive_snapshot(device, name, &errp);
++    qmp_savevm_start(statefile, &errp);
 +    hmp_handle_error(mon, errp);
 +}
 +
@@ -803,7 +715,7 @@ index e9fa9af6bd..5000ce39d1 100644
 +    SaveVMInfo *info;
 +    info = qmp_query_savevm(NULL);
 +
-+    if (info->has_status) {
++    if (info->status) {
 +        monitor_printf(mon, "savevm status: %s\n", info->status);
 +        monitor_printf(mon, "total time: %" PRIu64 " milliseconds\n",
 +                       info->total_time);
@@ -813,19 +725,15 @@ index e9fa9af6bd..5000ce39d1 100644
 +    if (info->has_bytes) {
 +        monitor_printf(mon, "Bytes saved: %"PRIu64"\n", info->bytes);
 +    }
-+    if (info->has_error) {
++    if (info->error) {
 +        monitor_printf(mon, "Error: %s\n", info->error);
 +    }
 +}
-+
- void hmp_info_iothreads(Monitor *mon, const QDict *qdict)
- {
-     IOThreadInfoList *info_list = qmp_query_iothreads(NULL);
 diff --git a/qapi/migration.json b/qapi/migration.json
-index bbfd48cf0b..45686390a2 100644
+index c84fa10e86..1702b92553 100644
 --- a/qapi/migration.json
 +++ b/qapi/migration.json
-@@ -247,6 +247,40 @@
+@@ -261,6 +261,40 @@
             '*compression': 'CompressionStats',
             '*socket-address': ['SocketAddress'] } }
  
@@ -867,10 +775,10 @@ index bbfd48cf0b..45686390a2 100644
  # @query-migrate:
  #
 diff --git a/qapi/misc.json b/qapi/misc.json
-index 358548abe1..25b3febc52 100644
+index 6ddd16ea28..e5681ae8a2 100644
 --- a/qapi/misc.json
 +++ b/qapi/misc.json
-@@ -435,6 +435,38 @@
+@@ -469,6 +469,22 @@
  ##
  { 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
  
@@ -883,22 +791,6 @@ index 358548abe1..25b3febc52 100644
 +{ 'command': 'savevm-start', 'data': { '*statefile': 'str' } }
 +
 +##
-+# @snapshot-drive:
-+#
-+# Create an internal drive snapshot.
-+#
-+##
-+{ 'command': 'snapshot-drive', 'data': { 'device': 'str', 'name': 'str' } }
-+
-+##
-+# @delete-drive-snapshot:
-+#
-+# Delete a drive snapshot.
-+#
-+##
-+{ 'command': 'delete-drive-snapshot', 'data': { 'device': 'str', 'name': 'str' } }
-+
-+##
 +# @savevm-end:
 +#
 +# Resume VM after a snapshot.
@@ -910,10 +802,10 @@ index 358548abe1..25b3febc52 100644
  # @CommandLineParameterType:
  #
 diff --git a/qemu-options.hx b/qemu-options.hx
-index ae2c6dbbfc..423144abeb 100644
+index fdddfab6ff..fdd551c2bb 100644
 --- a/qemu-options.hx
 +++ b/qemu-options.hx
-@@ -4171,6 +4171,18 @@ SRST
+@@ -4398,6 +4398,18 @@ SRST
      Start right away with a saved state (``loadvm`` in monitor)
  ERST
  
@@ -933,18 +825,18 @@ index ae2c6dbbfc..423144abeb 100644
  DEF("daemonize", 0, QEMU_OPTION_daemonize, \
      "-daemonize      daemonize QEMU after initializing\n", QEMU_ARCH_ALL)
 diff --git a/softmmu/vl.c b/softmmu/vl.c
-index 620a1f1367..fd82efb8b3 100644
+index ea20b23e4c..0eabc71b68 100644
 --- a/softmmu/vl.c
 +++ b/softmmu/vl.c
-@@ -156,6 +156,7 @@ static const char *incoming;
- static const char *loadvm;
- static const char *accelerators;
+@@ -164,6 +164,7 @@ static const char *accelerators;
+ static bool have_custom_ram_size;
+ static const char *ram_memdev_id;
  static QDict *machine_opts_dict;
 +static const char *loadstate;
  static QTAILQ_HEAD(, ObjectOption) object_opts = QTAILQ_HEAD_INITIALIZER(object_opts);
  static QTAILQ_HEAD(, DeviceOption) device_opts = QTAILQ_HEAD_INITIALIZER(device_opts);
- static ram_addr_t maxram_size;
-@@ -2743,6 +2744,12 @@ void qmp_x_exit_preconfig(Error **errp)
+ static int display_remote;
+@@ -2612,6 +2613,12 @@ void qmp_x_exit_preconfig(Error **errp)
  
      if (loadvm) {
          load_snapshot(loadvm, NULL, false, NULL, &error_fatal);
@@ -957,7 +849,7 @@ index 620a1f1367..fd82efb8b3 100644
      }
      if (replay_mode != REPLAY_MODE_NONE) {
          replay_vmstate_init();
-@@ -3284,6 +3291,9 @@ void qemu_init(int argc, char **argv, char **envp)
+@@ -3159,6 +3166,9 @@ void qemu_init(int argc, char **argv)
              case QEMU_OPTION_loadvm:
                  loadvm = optarg;
                  break;

debian/patches/pve/0018-PVE-add-optional-buffer-size-to-QEMUFile.patch

@@ -10,17 +10,19 @@ Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 [increase max IOV count in QEMUFile to actually write more data]
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to removal of QEMUFileOps]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- migration/qemu-file.c    | 38 +++++++++++++++++++++++++-------------
- migration/qemu-file.h    |  1 +
- migration/savevm-async.c |  4 ++--
- 3 files changed, 28 insertions(+), 15 deletions(-)
+ migration/qemu-file.c    | 49 +++++++++++++++++++++++++++-------------
+ migration/qemu-file.h    |  2 ++
+ migration/savevm-async.c |  5 ++--
+ 3 files changed, 38 insertions(+), 18 deletions(-)
 
 diff --git a/migration/qemu-file.c b/migration/qemu-file.c
-index 6338d8e2ff..6697a93a7e 100644
+index 102ab3b439..5ced17aba4 100644
 --- a/migration/qemu-file.c
 +++ b/migration/qemu-file.c
-@@ -30,8 +30,8 @@
+@@ -31,8 +31,8 @@
  #include "trace.h"
  #include "qapi/error.h"
  
@@ -30,9 +32,9 @@ index 6338d8e2ff..6697a93a7e 100644
 +#define MAX_IOV_SIZE MIN_CONST(IOV_MAX, 256)
  
  struct QEMUFile {
-     const QEMUFileOps *ops;
-@@ -45,7 +45,8 @@ struct QEMUFile {
-                     when reading */
+     const QEMUFileHooks *hooks;
+@@ -55,7 +55,8 @@ struct QEMUFile {
+ 
      int buf_index;
      int buf_size; /* 0 when writing */
 -    uint8_t buf[IO_BUF_SIZE];
@@ -41,53 +43,76 @@ index 6338d8e2ff..6697a93a7e 100644
  
      DECLARE_BITMAP(may_free, MAX_IOV_SIZE);
      struct iovec iov[MAX_IOV_SIZE];
-@@ -103,7 +104,7 @@ bool qemu_file_mode_is_not_valid(const char *mode)
+@@ -127,7 +128,9 @@ bool qemu_file_mode_is_not_valid(const char *mode)
      return false;
  }
  
--QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops, bool has_ioc)
-+QEMUFile *qemu_fopen_ops_sized(void *opaque, const QEMUFileOps *ops, bool has_ioc, size_t buffer_size)
+-static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
++static QEMUFile *qemu_file_new_impl(QIOChannel *ioc,
++                                    bool is_writable,
++                                    size_t buffer_size)
  {
      QEMUFile *f;
  
-@@ -112,9 +113,17 @@ QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops, bool has_ioc)
-     f->opaque = opaque;
-     f->ops = ops;
-     f->has_ioc = has_ioc;
+@@ -136,6 +139,8 @@ static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
+     object_ref(ioc);
+     f->ioc = ioc;
+     f->is_writable = is_writable;
 +    f->buf_allocated_size = buffer_size;
 +    f->buf = malloc(buffer_size);
-+
+ 
      return f;
  }
+@@ -146,17 +151,27 @@ static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
+  */
+ QEMUFile *qemu_file_get_return_path(QEMUFile *f)
+ {
+-    return qemu_file_new_impl(f->ioc, !f->is_writable);
++    return qemu_file_new_impl(f->ioc, !f->is_writable, DEFAULT_IO_BUF_SIZE);
+ }
  
-+QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops, bool has_ioc)
-+{
-+    return qemu_fopen_ops_sized(opaque, ops, has_ioc, DEFAULT_IO_BUF_SIZE);
+ QEMUFile *qemu_file_new_output(QIOChannel *ioc)
+ {
+-    return qemu_file_new_impl(ioc, true);
++    return qemu_file_new_impl(ioc, true, DEFAULT_IO_BUF_SIZE);
 +}
 +
++QEMUFile *qemu_file_new_output_sized(QIOChannel *ioc, size_t buffer_size)
++{
++    return qemu_file_new_impl(ioc, true, buffer_size);
+ }
+ 
+ QEMUFile *qemu_file_new_input(QIOChannel *ioc)
+ {
+-    return qemu_file_new_impl(ioc, false);
++    return qemu_file_new_impl(ioc, false, DEFAULT_IO_BUF_SIZE);
++}
++
++QEMUFile *qemu_file_new_input_sized(QIOChannel *ioc, size_t buffer_size)
++{
++    return qemu_file_new_impl(ioc, false, buffer_size);
+ }
  
  void qemu_file_set_hooks(QEMUFile *f, const QEMUFileHooks *hooks)
- {
-@@ -349,7 +358,7 @@ static ssize_t qemu_fill_buffer(QEMUFile *f)
+@@ -414,7 +429,7 @@ static ssize_t qemu_fill_buffer(QEMUFile *f)
+     do {
+         len = qio_channel_read(f->ioc,
+                                (char *)f->buf + pending,
+-                               IO_BUF_SIZE - pending,
++                               f->buf_allocated_size - pending,
+                                &local_error);
+         if (len == QIO_CHANNEL_ERR_BLOCK) {
+             if (qemu_in_coroutine()) {
+@@ -464,6 +479,8 @@ int qemu_fclose(QEMUFile *f)
      }
+     g_clear_pointer(&f->ioc, object_unref);
  
-     len = f->ops->get_buffer(f->opaque, f->buf + pending, f->pos,
--                             IO_BUF_SIZE - pending, &local_error);
-+                             f->buf_allocated_size - pending, &local_error);
-     if (len > 0) {
-         f->buf_size += len;
-         f->pos += len;
-@@ -389,6 +398,9 @@ int qemu_fclose(QEMUFile *f)
-             ret = ret2;
-         }
-     }
-+
 +    free(f->buf);
 +
      /* If any error was spotted before closing, we should report it
       * instead of the close() return value.
       */
-@@ -443,7 +455,7 @@ static void add_buf_to_iovec(QEMUFile *f, size_t len)
+@@ -518,7 +535,7 @@ static void add_buf_to_iovec(QEMUFile *f, size_t len)
  {
      if (!add_to_iovec(f, f->buf + f->buf_index, len, false)) {
          f->buf_index += len;
@@ -96,7 +121,7 @@ index 6338d8e2ff..6697a93a7e 100644
              qemu_fflush(f);
          }
      }
-@@ -469,7 +481,7 @@ void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, size_t size)
+@@ -544,7 +561,7 @@ void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, size_t size)
      }
  
      while (size > 0) {
@@ -105,7 +130,7 @@ index 6338d8e2ff..6697a93a7e 100644
          if (l > size) {
              l = size;
          }
-@@ -516,8 +528,8 @@ size_t qemu_peek_buffer(QEMUFile *f, uint8_t **buf, size_t size, size_t offset)
+@@ -591,8 +608,8 @@ size_t qemu_peek_buffer(QEMUFile *f, uint8_t **buf, size_t size, size_t offset)
      size_t index;
  
      assert(!qemu_file_is_writable(f));
@@ -116,7 +141,7 @@ index 6338d8e2ff..6697a93a7e 100644
  
      /* The 1st byte to read from */
      index = f->buf_index + offset;
-@@ -567,7 +579,7 @@ size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
+@@ -642,7 +659,7 @@ size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
          size_t res;
          uint8_t *src;
  
@@ -125,7 +150,7 @@ index 6338d8e2ff..6697a93a7e 100644
          if (res == 0) {
              return done;
          }
-@@ -601,7 +613,7 @@ size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
+@@ -676,7 +693,7 @@ size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
   */
  size_t qemu_get_buffer_in_place(QEMUFile *f, uint8_t **buf, size_t size)
  {
@@ -134,7 +159,7 @@ index 6338d8e2ff..6697a93a7e 100644
          size_t res;
          uint8_t *src = NULL;
  
-@@ -626,7 +638,7 @@ int qemu_peek_byte(QEMUFile *f, int offset)
+@@ -701,7 +718,7 @@ int qemu_peek_byte(QEMUFile *f, int offset)
      int index = f->buf_index + offset;
  
      assert(!qemu_file_is_writable(f));
@@ -143,7 +168,7 @@ index 6338d8e2ff..6697a93a7e 100644
  
      if (index >= f->buf_size) {
          qemu_fill_buffer(f);
-@@ -778,7 +790,7 @@ static int qemu_compress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
+@@ -853,7 +870,7 @@ static int qemu_compress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
  ssize_t qemu_put_compression_data(QEMUFile *f, z_stream *stream,
                                    const uint8_t *p, size_t size)
  {
@@ -153,36 +178,39 @@ index 6338d8e2ff..6697a93a7e 100644
      if (blen < compressBound(size)) {
          return -1;
 diff --git a/migration/qemu-file.h b/migration/qemu-file.h
-index 3f36d4dc8c..67501fd9cf 100644
+index 9d0155a2a1..cc06240e8d 100644
 --- a/migration/qemu-file.h
 +++ b/migration/qemu-file.h
-@@ -121,6 +121,7 @@ typedef struct QEMUFileHooks {
+@@ -63,7 +63,9 @@ typedef struct QEMUFileHooks {
  } QEMUFileHooks;
  
- QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops, bool has_ioc);
-+QEMUFile *qemu_fopen_ops_sized(void *opaque, const QEMUFileOps *ops, bool has_ioc, size_t buffer_size);
+ QEMUFile *qemu_file_new_input(QIOChannel *ioc);
++QEMUFile *qemu_file_new_input_sized(QIOChannel *ioc, size_t buffer_size);
+ QEMUFile *qemu_file_new_output(QIOChannel *ioc);
++QEMUFile *qemu_file_new_output_sized(QIOChannel *ioc, size_t buffer_size);
  void qemu_file_set_hooks(QEMUFile *f, const QEMUFileHooks *hooks);
- int qemu_get_fd(QEMUFile *f);
  int qemu_fclose(QEMUFile *f);
+ 
 diff --git a/migration/savevm-async.c b/migration/savevm-async.c
-index 79a0cda906..970ee3b3fc 100644
+index ac1fac6378..ea3b2f36a6 100644
 --- a/migration/savevm-async.c
 +++ b/migration/savevm-async.c
-@@ -418,7 +418,7 @@ void qmp_savevm_start(bool has_statefile, const char *statefile, Error **errp)
-         goto restart;
-     }
+@@ -380,7 +380,7 @@ void qmp_savevm_start(const char *statefile, Error **errp)
  
--    snap_state.file = qemu_fopen_ops(&snap_state, &block_file_ops);
-+    snap_state.file = qemu_fopen_ops_sized(&snap_state, &block_file_ops, false, 4 * 1024 * 1024);
+     QIOChannel *ioc = QIO_CHANNEL(qio_channel_savevm_async_new(snap_state.target,
+                                                                &snap_state.bs_pos));
+-    snap_state.file = qemu_file_new_output(ioc);
++    snap_state.file = qemu_file_new_output_sized(ioc, 4 * 1024 * 1024);
  
      if (!snap_state.file) {
          error_set(errp, ERROR_CLASS_GENERIC_ERROR, "failed to open '%s'", statefile);
-@@ -567,7 +567,7 @@ int load_snapshot_from_blockdev(const char *filename, Error **errp)
+@@ -498,7 +498,8 @@ int load_snapshot_from_blockdev(const char *filename, Error **errp)
      blk_op_block_all(be, blocker);
  
      /* restore the VM state */
--    f = qemu_fopen_ops(be, &loadstate_file_ops);
-+    f = qemu_fopen_ops_sized(be, &loadstate_file_ops, false, 4 * 1024 * 1024);
+-    f = qemu_file_new_input(QIO_CHANNEL(qio_channel_savevm_async_new(be, &bs_pos)));
++    f = qemu_file_new_input_sized(QIO_CHANNEL(qio_channel_savevm_async_new(be, &bs_pos)),
++                                  4 * 1024 * 1024);
      if (!f) {
          error_setg(errp, "Could not open VM state file");
          goto the_end;

debian/patches/pve/0019-PVE-block-add-the-zeroinit-block-driver-filter.patch

@@ -4,19 +4,19 @@ Date: Mon, 6 Apr 2020 12:16:47 +0200
 Subject: [PATCH] PVE: block: add the zeroinit block driver filter
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[adapt to changed function signatures]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+[FE: adapt to changed function signatures]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/meson.build |   1 +
- block/zeroinit.c  | 196 ++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 197 insertions(+)
+ block/zeroinit.c  | 200 ++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 201 insertions(+)
  create mode 100644 block/zeroinit.c
 
 diff --git a/block/meson.build b/block/meson.build
-index deb73ca389..c9d1fdca7d 100644
+index 382bec0e7d..253fe49fa2 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -41,6 +41,7 @@ block_ss.add(files(
+@@ -44,6 +44,7 @@ block_ss.add(files(
    'vmdk.c',
    'vpc.c',
    'write-threshold.c',
@@ -26,10 +26,10 @@ index deb73ca389..c9d1fdca7d 100644
  softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
 diff --git a/block/zeroinit.c b/block/zeroinit.c
 new file mode 100644
-index 0000000000..20ee611f22
+index 0000000000..1257342724
 --- /dev/null
 +++ b/block/zeroinit.c
-@@ -0,0 +1,196 @@
+@@ -0,0 +1,200 @@
 +/*
 + * Filter to fake a zero-initialized block device.
 + *
@@ -43,6 +43,7 @@ index 0000000000..20ee611f22
 +#include "qemu/osdep.h"
 +#include "qapi/error.h"
 +#include "block/block_int.h"
++#include "block/block-io.h"
 +#include "qapi/qmp/qdict.h"
 +#include "qapi/qmp/qstring.h"
 +#include "qemu/cutils.h"
@@ -109,7 +110,9 @@ index 0000000000..20ee611f22
 +
 +    /* Open the raw file */
 +    bs->file = bdrv_open_child(qemu_opt_get(opts, "x-next"), options, "next",
-+                               bs, &child_of_bds, BDRV_CHILD_FILTERED, false, &local_err);
++                               bs, &child_of_bds,
++                               BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY,
++                               false, &local_err);
 +    if (local_err) {
 +        ret = -EINVAL;
 +        error_propagate(errp, local_err);
@@ -134,9 +137,9 @@ index 0000000000..20ee611f22
 +    (void)s;
 +}
 +
-+static int64_t zeroinit_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t zeroinit_co_getlength(BlockDriverState *bs)
 +{
-+    return bdrv_getlength(bs->file->bs);
++    return bdrv_co_getlength(bs->file->bs);
 +}
 +
 +static int coroutine_fn zeroinit_co_preadv(BlockDriverState *bs,
@@ -188,9 +191,10 @@ index 0000000000..20ee611f22
 +    return bdrv_co_truncate(bs->file, offset, exact, prealloc, req_flags, errp);
 +}
 +
-+static int zeroinit_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
++static coroutine_fn int zeroinit_co_get_info(BlockDriverState *bs,
++                                             BlockDriverInfo *bdi)
 +{
-+    return bdrv_get_info(bs->file->bs, bdi);
++    return bdrv_co_get_info(bs->file->bs, bdi);
 +}
 +
 +static BlockDriver bdrv_zeroinit = {
@@ -201,7 +205,7 @@ index 0000000000..20ee611f22
 +    .bdrv_parse_filename              = zeroinit_parse_filename,
 +    .bdrv_file_open                   = zeroinit_open,
 +    .bdrv_close                       = zeroinit_close,
-+    .bdrv_getlength                   = zeroinit_getlength,
++    .bdrv_co_getlength                = zeroinit_co_getlength,
 +    .bdrv_child_perm                  = bdrv_default_perms,
 +    .bdrv_co_flush_to_disk            = zeroinit_co_flush,
 +
@@ -217,7 +221,7 @@ index 0000000000..20ee611f22
 +    .bdrv_co_pdiscard                 = zeroinit_co_pdiscard,
 +
 +    .bdrv_co_truncate                 = zeroinit_co_truncate,
-+    .bdrv_get_info                    = zeroinit_get_info,
++    .bdrv_co_get_info                 = zeroinit_co_get_info,
 +};
 +
 +static void bdrv_zeroinit_init(void)

debian/patches/pve/0020-PVE-Add-dummy-id-command-line-parameter.patch

@@ -14,12 +14,12 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  2 files changed, 11 insertions(+)
 
 diff --git a/qemu-options.hx b/qemu-options.hx
-index 423144abeb..4879471aeb 100644
+index fdd551c2bb..4eb43b7bc5 100644
 --- a/qemu-options.hx
 +++ b/qemu-options.hx
-@@ -1019,6 +1019,9 @@ DEFHEADING()
+@@ -1162,6 +1162,9 @@ legacy PC, they are not recommended for modern configurations.
  
- DEFHEADING(Block device options:)
+ ERST
  
 +DEF("id", HAS_ARG, QEMU_OPTION_id,
 +    "-id n           set the VMID", QEMU_ARCH_ALL)
@@ -28,10 +28,10 @@ index 423144abeb..4879471aeb 100644
      "-fda/-fdb file  use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL)
  DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
 diff --git a/softmmu/vl.c b/softmmu/vl.c
-index fd82efb8b3..eb05e5a000 100644
+index 0eabc71b68..323f6a23d4 100644
 --- a/softmmu/vl.c
 +++ b/softmmu/vl.c
-@@ -2779,6 +2779,7 @@ void qemu_init(int argc, char **argv, char **envp)
+@@ -2648,6 +2648,7 @@ void qemu_init(int argc, char **argv)
      MachineClass *machine_class;
      bool userconfig = true;
      FILE *vmstate_dump_file = NULL;
@@ -39,7 +39,7 @@ index fd82efb8b3..eb05e5a000 100644
  
      qemu_add_opts(&qemu_drive_opts);
      qemu_add_drive_opts(&qemu_legacy_drive_opts);
-@@ -3421,6 +3422,13 @@ void qemu_init(int argc, char **argv, char **envp)
+@@ -3271,6 +3272,13 @@ void qemu_init(int argc, char **argv)
                  machine_parse_property_opt(qemu_find_opts("smp-opts"),
                                             "smp", optarg);
                  break;

debian/patches/pve/0021-PVE-Config-Revert-target-i386-disable-LINT0-after-re.patch

@@ -11,10 +11,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+)
 
 diff --git a/hw/intc/apic_common.c b/hw/intc/apic_common.c
-index 2a20982066..7968ad5a93 100644
+index 4a34f03047..59b917e50c 100644
 --- a/hw/intc/apic_common.c
 +++ b/hw/intc/apic_common.c
-@@ -278,6 +278,15 @@ static void apic_reset_common(DeviceState *dev)
+@@ -252,6 +252,15 @@ static void apic_reset_common(DeviceState *dev)
      info->vapic_base_update(s);
  
      apic_init_reset(dev);

debian/patches/pve/0022-PVE-Up-Config-file-posix-make-locking-optiono-on-cre.patch

@@ -13,10 +13,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  2 files changed, 42 insertions(+), 20 deletions(-)
 
 diff --git a/block/file-posix.c b/block/file-posix.c
-index 821405fd02..e3b6c3c524 100644
+index 9681bd0434..044890822d 100644
 --- a/block/file-posix.c
 +++ b/block/file-posix.c
-@@ -2465,6 +2465,7 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2483,6 +2483,7 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      int fd;
      uint64_t perm, shared;
      int result = 0;
@@ -24,7 +24,7 @@ index 821405fd02..e3b6c3c524 100644
  
      /* Validate options and set default values */
      assert(options->driver == BLOCKDEV_DRIVER_FILE);
-@@ -2505,19 +2506,22 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2523,19 +2524,22 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      perm = BLK_PERM_WRITE | BLK_PERM_RESIZE;
      shared = BLK_PERM_ALL & ~BLK_PERM_RESIZE;
  
@@ -59,7 +59,7 @@ index 821405fd02..e3b6c3c524 100644
      }
  
      /* Clear the file by truncating it to 0 */
-@@ -2571,13 +2575,15 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2589,13 +2593,15 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      }
  
  out_unlock:
@@ -82,7 +82,7 @@ index 821405fd02..e3b6c3c524 100644
      }
  
  out_close:
-@@ -2602,6 +2608,7 @@ static int coroutine_fn raw_co_create_opts(BlockDriver *drv,
+@@ -2619,6 +2625,7 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
      PreallocMode prealloc;
      char *buf = NULL;
      Error *local_err = NULL;
@@ -90,7 +90,7 @@ index 821405fd02..e3b6c3c524 100644
  
      /* Skip file: protocol prefix */
      strstart(filename, "file:", &filename);
-@@ -2624,6 +2631,18 @@ static int coroutine_fn raw_co_create_opts(BlockDriver *drv,
+@@ -2641,6 +2648,18 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
          return -EINVAL;
      }
  
@@ -109,7 +109,7 @@ index 821405fd02..e3b6c3c524 100644
      options = (BlockdevCreateOptions) {
          .driver     = BLOCKDEV_DRIVER_FILE,
          .u.file     = {
-@@ -2635,6 +2654,8 @@ static int coroutine_fn raw_co_create_opts(BlockDriver *drv,
+@@ -2652,6 +2671,8 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
              .nocow              = nocow,
              .has_extent_size_hint = has_extent_size_hint,
              .extent_size_hint   = extent_size_hint,
@@ -119,10 +119,10 @@ index 821405fd02..e3b6c3c524 100644
      };
      return raw_co_create(&options, errp);
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 1d3dd9cb48..3f81d6a5c0 100644
+index 3c945c1f93..542add004b 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -4445,7 +4445,8 @@
+@@ -4740,7 +4740,8 @@
              'size':                 'size',
              '*preallocation':       'PreallocMode',
              '*nocow':               'bool',

debian/patches/pve/0024-PVE-Compat-4.0-used-balloon-qemu-4-0-config-size-fal.patch

@@ -26,10 +26,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 1 deletion(-)
 
 diff --git a/hw/core/machine.c b/hw/core/machine.c
-index 53a99abc56..ad2cb2592e 100644
+index 2f6ccf5623..a5927e92f1 100644
 --- a/hw/core/machine.c
 +++ b/hw/core/machine.c
-@@ -113,7 +113,8 @@ GlobalProperty hw_compat_4_0[] = {
+@@ -142,7 +142,8 @@ GlobalProperty hw_compat_4_0[] = {
      { "virtio-vga",     "edid", "false" },
      { "virtio-gpu-device", "edid", "false" },
      { "virtio-device", "use-started", "false" },

debian/patches/pve/0025-PVE-Allow-version-code-in-machine-type.patch

@@ -11,70 +11,71 @@ and only if 'is-current').
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to QAPI changes]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- hw/core/machine-qmp-cmds.c |  6 ++++++
+ hw/core/machine-qmp-cmds.c |  5 +++++
  include/hw/boards.h        |  2 ++
  qapi/machine.json          |  4 +++-
  softmmu/vl.c               | 25 +++++++++++++++++++++++++
- 4 files changed, 36 insertions(+), 1 deletion(-)
+ 4 files changed, 35 insertions(+), 1 deletion(-)
 
 diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c
-index 76fff60a6b..ec9201fb9a 100644
+index 24595f618c..ee9cb0cd04 100644
 --- a/hw/core/machine-qmp-cmds.c
 +++ b/hw/core/machine-qmp-cmds.c
-@@ -103,6 +103,12 @@ MachineInfoList *qmp_query_machines(Error **errp)
+@@ -107,6 +107,11 @@ MachineInfoList *qmp_query_machines(Error **errp)
          if (strcmp(mc->name, MACHINE_GET_CLASS(current_machine)->name) == 0) {
              info->has_is_current = true;
              info->is_current = true;
 +
 +            // PVE version string only exists for current machine
 +            if (mc->pve_version) {
-+                info->has_pve_version = true;
 +                info->pve_version = g_strdup(mc->pve_version);
 +            }
          }
  
          if (mc->default_cpu_type) {
 diff --git a/include/hw/boards.h b/include/hw/boards.h
-index 9c1c190104..51e04bde62 100644
+index 6fbbfd56c8..61a526e97d 100644
 --- a/include/hw/boards.h
 +++ b/include/hw/boards.h
-@@ -227,6 +227,8 @@ struct MachineClass {
+@@ -232,6 +232,8 @@ struct MachineClass {
      const char *desc;
      const char *deprecation_reason;
  
 +    const char *pve_version;
 +
      void (*init)(MachineState *state);
-     void (*reset)(MachineState *state);
+     void (*reset)(MachineState *state, ShutdownCause reason);
      void (*wakeup)(MachineState *state);
 diff --git a/qapi/machine.json b/qapi/machine.json
-index 0905618e25..a05c46e253 100644
+index c904280085..47f3facdb2 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -160,6 +160,8 @@
+@@ -159,6 +159,8 @@
  #
- # @default-ram-id: the default ID of initial RAM memory backend (since 5.2)
+ # @acpi: machine type supports ACPI (since 8.0)
  #
 +# @pve-version: custom PVE version suffix specified as 'machine+pveN'
 +#
  # Since: 1.2
  ##
  { 'struct': 'MachineInfo',
-@@ -167,7 +169,7 @@
+@@ -166,7 +168,7 @@
              '*is-default': 'bool', '*is-current': 'bool', 'cpu-max': 'int',
              'hotpluggable-cpus': 'bool',  'numa-mem-supported': 'bool',
              'deprecated': 'bool', '*default-cpu-type': 'str',
--            '*default-ram-id': 'str' } }
-+            '*default-ram-id': 'str', '*pve-version': 'str' } }
+-            '*default-ram-id': 'str', 'acpi': 'bool' } }
++            '*default-ram-id': 'str', 'acpi': 'bool', '*pve-version': 'str' } }
  
  ##
  # @query-machines:
 diff --git a/softmmu/vl.c b/softmmu/vl.c
-index eb05e5a000..f306d21d63 100644
+index 323f6a23d4..25abdc9da7 100644
 --- a/softmmu/vl.c
 +++ b/softmmu/vl.c
-@@ -1655,6 +1655,7 @@ static const QEMUOption *lookup_opt(int argc, char **argv,
+@@ -1578,6 +1578,7 @@ static const QEMUOption *lookup_opt(int argc, char **argv,
  static MachineClass *select_machine(QDict *qdict, Error **errp)
  {
      const char *optarg = qdict_get_try_str(qdict, "type");
@@ -82,7 +83,7 @@ index eb05e5a000..f306d21d63 100644
      GSList *machines = object_class_get_list(TYPE_MACHINE, false);
      MachineClass *machine_class;
      Error *local_err = NULL;
-@@ -1672,6 +1673,11 @@ static MachineClass *select_machine(QDict *qdict, Error **errp)
+@@ -1595,6 +1596,11 @@ static MachineClass *select_machine(QDict *qdict, Error **errp)
          }
      }
  
@@ -94,7 +95,7 @@ index eb05e5a000..f306d21d63 100644
      g_slist_free(machines);
      if (local_err) {
          error_append_hint(&local_err, "Use -machine help to list supported machines\n");
-@@ -3363,12 +3369,31 @@ void qemu_init(int argc, char **argv, char **envp)
+@@ -3213,12 +3219,31 @@ void qemu_init(int argc, char **argv)
              case QEMU_OPTION_machine:
                  {
                      bool help;

debian/patches/pve/0026-block-backup-move-bcs-bitmap-initialization-to-job-c.patch

@@ -25,11 +25,11 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 4 insertions(+), 4 deletions(-)
 
 diff --git a/block/backup.c b/block/backup.c
-index 21d5983779..47e218857d 100644
+index db3791f4d1..39410dcf8d 100644
 --- a/block/backup.c
 +++ b/block/backup.c
-@@ -239,8 +239,8 @@ static void backup_init_bcs_bitmap(BackupBlockJob *job)
-         assert(ret);
+@@ -237,8 +237,8 @@ static void backup_init_bcs_bitmap(BackupBlockJob *job)
+                                          true);
      } else if (job->sync_mode == MIRROR_SYNC_MODE_TOP) {
          /*
 -         * We can't hog the coroutine to initialize this thoroughly.
@@ -39,7 +39,7 @@ index 21d5983779..47e218857d 100644
           */
          block_copy_set_skip_unallocated(job->bcs, true);
      }
-@@ -254,8 +254,6 @@ static int coroutine_fn backup_run(Job *job, Error **errp)
+@@ -252,8 +252,6 @@ static int coroutine_fn backup_run(Job *job, Error **errp)
      BackupBlockJob *s = container_of(job, BackupBlockJob, common.job);
      int ret;
  
@@ -48,7 +48,7 @@ index 21d5983779..47e218857d 100644
      if (s->sync_mode == MIRROR_SYNC_MODE_TOP) {
          int64_t offset = 0;
          int64_t count;
-@@ -493,6 +491,8 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+@@ -495,6 +493,8 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
      block_job_add_bdrv(&job->common, "target", target, 0, BLK_PERM_ALL,
                         &error_abort);
  

debian/patches/pve/0027-PVE-Backup-add-vma-backup-format-code.patch

@@ -3,40 +3,46 @@ From: Dietmar Maurer <dietmar@proxmox.com>
 Date: Mon, 6 Apr 2020 12:16:57 +0200
 Subject: [PATCH] PVE-Backup: add vma backup format code
 
+Notes about partial restoring: skipping a certain drive is done via a
+map line of the form skip=drive-scsi0. Since in PVE, most archives are
+compressed and piped to vma for restore, it's not easily possible to
+skip reads.
+
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[FE: create: register all streams before entering coroutines]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+[FE: improvements during create
+     allow partial restore]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/meson.build |   2 +
  meson.build       |   5 +
- vma-reader.c      | 860 ++++++++++++++++++++++++++++++++++++++++++++++
- vma-writer.c      | 790 ++++++++++++++++++++++++++++++++++++++++++
- vma.c             | 849 +++++++++++++++++++++++++++++++++++++++++++++
+ vma-reader.c      | 867 +++++++++++++++++++++++++++++++++++++++++++++
+ vma-writer.c      | 793 +++++++++++++++++++++++++++++++++++++++++
+ vma.c             | 878 ++++++++++++++++++++++++++++++++++++++++++++++
  vma.h             | 150 ++++++++
- 6 files changed, 2656 insertions(+)
+ 6 files changed, 2695 insertions(+)
  create mode 100644 vma-reader.c
  create mode 100644 vma-writer.c
  create mode 100644 vma.c
  create mode 100644 vma.h
 
 diff --git a/block/meson.build b/block/meson.build
-index c9d1fdca7d..72081a9974 100644
+index 253fe49fa2..744b698a82 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -44,6 +44,8 @@ block_ss.add(files(
+@@ -47,6 +47,8 @@ block_ss.add(files(
    'zeroinit.c',
  ), zstd, zlib, gnutls)
  
 +block_ss.add(files('../vma-writer.c'), libuuid)
 +
  softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ softmmu_ss.add(files('block-ram-registrar.c'))
  
- block_ss.add(when: 'CONFIG_QCOW1', if_true: files('qcow.c'))
 diff --git a/meson.build b/meson.build
-index 96de1a6ef9..54c23b9567 100644
+index 30447cfaef..38a4e2bcef 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -1202,6 +1202,8 @@ keyutils = dependency('libkeyutils', required: false,
+@@ -1527,6 +1527,8 @@ keyutils = dependency('libkeyutils', required: false,
  
  has_gettid = cc.has_function('gettid')
  
@@ -45,7 +51,7 @@ index 96de1a6ef9..54c23b9567 100644
  # libselinux
  selinux = dependency('libselinux',
                       required: get_option('selinux'),
-@@ -3070,6 +3072,9 @@ if have_tools
+@@ -3650,6 +3652,9 @@ if have_tools
                 dependencies: [blockdev, qemuutil, gnutls, selinux],
                 install: true)
  
@@ -57,10 +63,10 @@ index 96de1a6ef9..54c23b9567 100644
    subdir('contrib/elf2dmp')
 diff --git a/vma-reader.c b/vma-reader.c
 new file mode 100644
-index 0000000000..4f4ee2b47b
+index 0000000000..81a891c6b1
 --- /dev/null
 +++ b/vma-reader.c
-@@ -0,0 +1,860 @@
+@@ -0,0 +1,867 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -78,7 +84,6 @@ index 0000000000..4f4ee2b47b
 +#include <glib.h>
 +#include <uuid/uuid.h>
 +
-+#include "qemu-common.h"
 +#include "qemu/timer.h"
 +#include "qemu/ratelimit.h"
 +#include "vma.h"
@@ -92,6 +97,7 @@ index 0000000000..4f4ee2b47b
 +    bool write_zeroes;
 +    unsigned long *bitmap;
 +    int bitmap_size;
++    bool skip;
 +}  VmaRestoreState;
 +
 +struct VmaReader {
@@ -489,13 +495,14 @@ index 0000000000..4f4ee2b47b
 +}
 +
 +static void allocate_rstate(VmaReader *vmar,  guint8 dev_id,
-+                            BlockBackend *target, bool write_zeroes)
++                            BlockBackend *target, bool write_zeroes, bool skip)
 +{
 +    assert(vmar);
 +    assert(dev_id);
 +
 +    vmar->rstate[dev_id].target = target;
 +    vmar->rstate[dev_id].write_zeroes = write_zeroes;
++    vmar->rstate[dev_id].skip = skip;
 +
 +    int64_t size = vmar->devinfo[dev_id].size;
 +
@@ -510,28 +517,30 @@ index 0000000000..4f4ee2b47b
 +}
 +
 +int vma_reader_register_bs(VmaReader *vmar, guint8 dev_id, BlockBackend *target,
-+                           bool write_zeroes, Error **errp)
++                           bool write_zeroes, bool skip, Error **errp)
 +{
 +    assert(vmar);
-+    assert(target != NULL);
++    assert(target != NULL || skip);
 +    assert(dev_id);
-+    assert(vmar->rstate[dev_id].target == NULL);
++    assert(vmar->rstate[dev_id].target == NULL && !vmar->rstate[dev_id].skip);
 +
-+    int64_t size = blk_getlength(target);
-+    int64_t size_diff = size - vmar->devinfo[dev_id].size;
++    if (target != NULL) {
++        int64_t size = blk_getlength(target);
++        int64_t size_diff = size - vmar->devinfo[dev_id].size;
 +
-+    /* storage types can have different size restrictions, so it
-+     * is not always possible to create an image with exact size.
-+     * So we tolerate a size difference up to 4MB.
-+     */
-+    if ((size_diff < 0) || (size_diff > 4*1024*1024)) {
-+        error_setg(errp, "vma_reader_register_bs for stream %s failed - "
-+                   "unexpected size %zd != %zd", vmar->devinfo[dev_id].devname,
-+                   size, vmar->devinfo[dev_id].size);
-+        return -1;
++        /* storage types can have different size restrictions, so it
++         * is not always possible to create an image with exact size.
++         * So we tolerate a size difference up to 4MB.
++         */
++        if ((size_diff < 0) || (size_diff > 4*1024*1024)) {
++            error_setg(errp, "vma_reader_register_bs for stream %s failed - "
++                       "unexpected size %zd != %zd", vmar->devinfo[dev_id].devname,
++                       size, vmar->devinfo[dev_id].size);
++            return -1;
++        }
 +    }
 +
-+    allocate_rstate(vmar, dev_id, target, write_zeroes);
++    allocate_rstate(vmar, dev_id, target, write_zeroes, skip);
 +
 +    return 0;
 +}
@@ -589,7 +598,7 @@ index 0000000000..4f4ee2b47b
 +            }
 +        }
 +    } else {
-+        int res = blk_pwrite(target, sector_num * BDRV_SECTOR_SIZE, buf, nb_sectors * BDRV_SECTOR_SIZE, 0);
++        int res = blk_pwrite(target, sector_num * BDRV_SECTOR_SIZE, nb_sectors * BDRV_SECTOR_SIZE, buf, 0);
 +        if (res < 0) {
 +            error_setg(errp, "blk_pwrite to %s failed (%d)",
 +                       bdrv_get_device_name(blk_bs(target)), res);
@@ -624,19 +633,23 @@ index 0000000000..4f4ee2b47b
 +        VmaRestoreState *rstate = &vmar->rstate[dev_id];
 +        BlockBackend *target = NULL;
 +
++        bool skip = rstate->skip;
++
 +        if (dev_id != vmar->vmstate_stream) {
 +            target = rstate->target;
-+            if (!verify && !target) {
++            if (!verify && !target && !skip) {
 +                error_setg(errp, "got wrong dev id %d", dev_id);
 +                return -1;
 +            }
 +
-+            if (vma_reader_get_bitmap(rstate, cluster_num)) {
-+                error_setg(errp, "found duplicated cluster %zd for stream %s",
-+                          cluster_num, vmar->devinfo[dev_id].devname);
-+                return -1;
++            if (!skip) {
++                if (vma_reader_get_bitmap(rstate, cluster_num)) {
++                    error_setg(errp, "found duplicated cluster %zd for stream %s",
++                              cluster_num, vmar->devinfo[dev_id].devname);
++                    return -1;
++                }
++                vma_reader_set_bitmap(rstate, cluster_num, 1);
 +            }
-+            vma_reader_set_bitmap(rstate, cluster_num, 1);
 +
 +            max_sector = vmar->devinfo[dev_id].size/BDRV_SECTOR_SIZE;
 +        } else {
@@ -682,7 +695,7 @@ index 0000000000..4f4ee2b47b
 +                return -1;
 +            }
 +
-+            if (!verify) {
++            if (!verify && !skip) {
 +                int nb_sectors = end_sector - sector_num;
 +                if (restore_write_data(vmar, dev_id, target, vmstate_fd,
 +                                       buf + start, sector_num, nb_sectors,
@@ -718,7 +731,7 @@ index 0000000000..4f4ee2b47b
 +                        return -1;
 +                    }
 +
-+                    if (!verify) {
++                    if (!verify && !skip) {
 +                        int nb_sectors = end_sector - sector_num;
 +                        if (restore_write_data(vmar, dev_id, target, vmstate_fd,
 +                                               buf + start, sector_num,
@@ -743,7 +756,7 @@ index 0000000000..4f4ee2b47b
 +                            vmar->partial_zero_cluster_data += zero_size;
 +                        }
 +
-+                        if (rstate->write_zeroes && !verify) {
++                        if (rstate->write_zeroes && !verify && !skip) {
 +                            if (restore_write_data(vmar, dev_id, target, vmstate_fd,
 +                                                   zero_vma_block, sector_num,
 +                                                   nb_sectors, errp) < 0) {
@@ -914,7 +927,7 @@ index 0000000000..4f4ee2b47b
 +
 +    for (dev_id = 1; dev_id < 255; dev_id++) {
 +        if (vma_reader_get_device_info(vmar, dev_id)) {
-+            allocate_rstate(vmar, dev_id, NULL, false);
++            allocate_rstate(vmar, dev_id, NULL, false, false);
 +        }
 +    }
 +
@@ -923,10 +936,10 @@ index 0000000000..4f4ee2b47b
 +
 diff --git a/vma-writer.c b/vma-writer.c
 new file mode 100644
-index 0000000000..11d8321ffd
+index 0000000000..ac7da237d0
 --- /dev/null
 +++ b/vma-writer.c
-@@ -0,0 +1,790 @@
+@@ -0,0 +1,793 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -950,6 +963,7 @@ index 0000000000..11d8321ffd
 +#include "qemu/main-loop.h"
 +#include "qemu/coroutine.h"
 +#include "qemu/cutils.h"
++#include "qemu/memalign.h"
 +
 +#define DEBUG_VMA 0
 +
@@ -1133,9 +1147,9 @@ index 0000000000..11d8321ffd
 +    assert(qemu_in_coroutine());
 +    AioContext *ctx = qemu_get_current_aio_context();
 +    aio_set_fd_handler(ctx, fd, false, NULL, (IOHandler *)qemu_coroutine_enter,
-+                       NULL, qemu_coroutine_self());
++                       NULL, NULL, qemu_coroutine_self());
 +    qemu_coroutine_yield();
-+    aio_set_fd_handler(ctx, fd, false, NULL, NULL, NULL, NULL);
++    aio_set_fd_handler(ctx, fd, false, NULL, NULL, NULL, NULL, NULL);
 +}
 +
 +static ssize_t coroutine_fn
@@ -1239,6 +1253,8 @@ index 0000000000..11d8321ffd
 +        }
 +
 +        if (vmaw->fd < 0) {
++            error_free(*errp);
++            *errp = NULL;
 +            error_setg(errp, "can't open file %s - %s\n", filename,
 +                       g_strerror(errno));
 +            goto err;
@@ -1719,10 +1735,10 @@ index 0000000000..11d8321ffd
 +}
 diff --git a/vma.c b/vma.c
 new file mode 100644
-index 0000000000..89440733b1
+index 0000000000..304f02bc84
 --- /dev/null
 +++ b/vma.c
-@@ -0,0 +1,849 @@
+@@ -0,0 +1,878 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -1740,11 +1756,11 @@ index 0000000000..89440733b1
 +#include <glib.h>
 +
 +#include "vma.h"
-+#include "qemu-common.h"
 +#include "qemu/module.h"
 +#include "qemu/error-report.h"
 +#include "qemu/main-loop.h"
 +#include "qemu/cutils.h"
++#include "qemu/memalign.h"
 +#include "qapi/qmp/qdict.h"
 +#include "sysemu/block-backend.h"
 +
@@ -1863,6 +1879,7 @@ index 0000000000..89440733b1
 +    char *throttling_group;
 +    char *cache;
 +    bool write_zero;
++    bool skip;
 +} RestoreMap;
 +
 +static bool try_parse_option(char **line, const char *optname, char **out, const char *inbuf) {
@@ -1970,47 +1987,61 @@ index 0000000000..89440733b1
 +            char *bps = NULL;
 +            char *group = NULL;
 +            char *cache = NULL;
++            char *devname = NULL;
++            bool skip = false;
++            uint64_t bps_value = 0;
++            const char *path = NULL;
++            bool write_zero = true;
++
 +            if (!line || line[0] == '\0' || !strcmp(line, "done\n")) {
 +                break;
 +            }
 +            int len = strlen(line);
 +            if (line[len - 1] == '\n') {
 +                line[len - 1] = '\0';
-+                if (len == 1) {
++                len = len - 1;
++                if (len == 0) {
 +                    break;
 +                }
 +            }
 +
-+            while (1) {
-+                if (!try_parse_option(&line, "format", &format, inbuf) &&
-+                    !try_parse_option(&line, "throttling.bps", &bps, inbuf) &&
-+                    !try_parse_option(&line, "throttling.group", &group, inbuf) &&
-+                    !try_parse_option(&line, "cache", &cache, inbuf))
-+                {
-+                    break;
++            if (strncmp(line, "skip", 4) == 0) {
++                if (len < 6 || line[4] != '=') {
++                    g_error("read map failed - option 'skip' has no value ('%s')",
++                            inbuf);
++                } else {
++                    devname = line + 5;
++                    skip = true;
 +                }
-+            }
-+
-+            uint64_t bps_value = 0;
-+            if (bps) {
-+                bps_value = verify_u64(bps);
-+                g_free(bps);
-+            }
-+
-+            const char *path;
-+            bool write_zero;
-+            if (line[0] == '0' && line[1] == ':') {
-+                path = line + 2;
-+                write_zero = false;
-+            } else if (line[0] == '1' && line[1] == ':') {
-+                path = line + 2;
-+                write_zero = true;
 +            } else {
-+                g_error("read map failed - parse error ('%s')", inbuf);
++                while (1) {
++                    if (!try_parse_option(&line, "format", &format, inbuf) &&
++                        !try_parse_option(&line, "throttling.bps", &bps, inbuf) &&
++                        !try_parse_option(&line, "throttling.group", &group, inbuf) &&
++                        !try_parse_option(&line, "cache", &cache, inbuf))
++                    {
++                        break;
++                    }
++                }
++
++                if (bps) {
++                    bps_value = verify_u64(bps);
++                    g_free(bps);
++                }
++
++                if (line[0] == '0' && line[1] == ':') {
++                    path = line + 2;
++                    write_zero = false;
++                } else if (line[0] == '1' && line[1] == ':') {
++                    path = line + 2;
++                    write_zero = true;
++                } else {
++                    g_error("read map failed - parse error ('%s')", inbuf);
++                }
++
++                path = extract_devname(path, &devname, -1);
 +            }
 +
-+            char *devname = NULL;
-+            path = extract_devname(path, &devname, -1);
 +            if (!devname) {
 +                g_error("read map failed - no dev name specified ('%s')",
 +                        inbuf);
@@ -2024,6 +2055,7 @@ index 0000000000..89440733b1
 +            map->throttling_group = group;
 +            map->cache = cache;
 +            map->write_zero = write_zero;
++            map->skip = skip;
 +
 +            g_hash_table_insert(devmap, map->devname, map);
 +
@@ -2053,6 +2085,7 @@ index 0000000000..89440733b1
 +            const char *cache = NULL;
 +            int flags = BDRV_O_RDWR;
 +            bool write_zero = true;
++            bool skip = false;
 +
 +            BlockBackend *blk = NULL;
 +
@@ -2068,6 +2101,7 @@ index 0000000000..89440733b1
 +                throttling_group = map->throttling_group;
 +                cache = map->cache;
 +                write_zero = map->write_zero;
++                skip = map->skip;
 +            } else {
 +                devfn = g_strdup_printf("%s/tmp-disk-%s.raw",
 +                                        dirname, di->devname);
@@ -2086,57 +2120,60 @@ index 0000000000..89440733b1
 +                write_zero = false;
 +            }
 +
-+	    size_t devlen = strlen(devfn);
-+	    QDict *options = NULL;
-+            bool writethrough;
-+            if (format) {
-+                /* explicit format from commandline */
-+                options = qdict_new();
-+                qdict_put_str(options, "driver", format);
-+            } else if ((devlen > 4 && strcmp(devfn+devlen-4, ".raw") == 0) ||
-+	               strncmp(devfn, "/dev/", 5) == 0)
-+	    {
-+                /* This part is now deprecated for PVE as well (just as qemu
-+                 * deprecated not specifying an explicit raw format, too.
-+                 */
-+		/* explicit raw format */
-+		options = qdict_new();
-+		qdict_put_str(options, "driver", "raw");
-+	    }
-+            if (cache && bdrv_parse_cache_mode(cache, &flags, &writethrough)) {
-+                g_error("invalid cache option: %s\n", cache);
-+            }
-+
-+	    if (errp || !(blk = blk_new_open(devfn, NULL, options, flags, &errp))) {
-+                g_error("can't open file %s - %s", devfn,
-+                        error_get_pretty(errp));
-+            }
-+
-+            if (cache) {
-+                blk_set_enable_write_cache(blk, !writethrough);
-+            }
-+
-+            if (throttling_group) {
-+                blk_io_limits_enable(blk, throttling_group);
-+            }
-+
-+            if (throttling_bps) {
-+                if (!throttling_group) {
-+                    blk_io_limits_enable(blk, devfn);
++            if (!skip) {
++                size_t devlen = strlen(devfn);
++                QDict *options = NULL;
++                bool writethrough;
++                if (format) {
++                    /* explicit format from commandline */
++                    options = qdict_new();
++                    qdict_put_str(options, "driver", format);
++                } else if ((devlen > 4 && strcmp(devfn+devlen-4, ".raw") == 0) ||
++                    strncmp(devfn, "/dev/", 5) == 0)
++                {
++                    /* This part is now deprecated for PVE as well (just as qemu
++                     * deprecated not specifying an explicit raw format, too.
++                     */
++                    /* explicit raw format */
++                    options = qdict_new();
++                    qdict_put_str(options, "driver", "raw");
 +                }
 +
-+                ThrottleConfig cfg;
-+                throttle_config_init(&cfg);
-+                cfg.buckets[THROTTLE_BPS_WRITE].avg = throttling_bps;
-+                Error *err = NULL;
-+                if (!throttle_is_valid(&cfg, &err)) {
-+                    error_report_err(err);
-+                    g_error("failed to apply throttling");
++                if (cache && bdrv_parse_cache_mode(cache, &flags, &writethrough)) {
++                    g_error("invalid cache option: %s\n", cache);
++                }
++
++                if (errp || !(blk = blk_new_open(devfn, NULL, options, flags, &errp))) {
++                    g_error("can't open file %s - %s", devfn,
++                            error_get_pretty(errp));
++                }
++
++                if (cache) {
++                    blk_set_enable_write_cache(blk, !writethrough);
++                }
++
++                if (throttling_group) {
++                    blk_io_limits_enable(blk, throttling_group);
++                }
++
++                if (throttling_bps) {
++                    if (!throttling_group) {
++                        blk_io_limits_enable(blk, devfn);
++                    }
++
++                    ThrottleConfig cfg;
++                    throttle_config_init(&cfg);
++                    cfg.buckets[THROTTLE_BPS_WRITE].avg = throttling_bps;
++                    Error *err = NULL;
++                    if (!throttle_is_valid(&cfg, &err)) {
++                        error_report_err(err);
++                        g_error("failed to apply throttling");
++                    }
++                    blk_set_io_limits(blk, &cfg);
 +                }
-+                blk_set_io_limits(blk, &cfg);
 +            }
 +
-+            if (vma_reader_register_bs(vmar, i, blk, write_zero, &errp) < 0) {
++            if (vma_reader_register_bs(vmar, i, blk, write_zero, skip, &errp) < 0) {
 +                g_error("%s", error_get_pretty(errp));
 +            }
 +
@@ -2252,7 +2289,7 @@ index 0000000000..89440733b1
 +    struct iovec iov;
 +    QEMUIOVector qiov;
 +
-+    int64_t start, end;
++    int64_t start, end, readlen;
 +    int ret = 0;
 +
 +    unsigned char *buf = blk_blockalign(job->target, VMA_CLUSTER_SIZE);
@@ -2266,8 +2303,16 @@ index 0000000000..89440733b1
 +        iov.iov_len = VMA_CLUSTER_SIZE;
 +        qemu_iovec_init_external(&qiov, &iov, 1);
 +
++        if (start + 1 == end) {
++            memset(buf, 0, VMA_CLUSTER_SIZE);
++            readlen = job->len - start * VMA_CLUSTER_SIZE;
++            assert(readlen > 0 && readlen <= VMA_CLUSTER_SIZE);
++        } else {
++            readlen = VMA_CLUSTER_SIZE;
++        }
++
 +        ret = blk_co_preadv(job->target, start * VMA_CLUSTER_SIZE,
-+                            VMA_CLUSTER_SIZE, &qiov, 0);
++                            readlen, &qiov, 0);
 +        if (ret < 0) {
 +            vma_writer_set_error(job->vmaw, "read error", -1);
 +            goto out;
@@ -2574,7 +2619,7 @@ index 0000000000..89440733b1
 +}
 diff --git a/vma.h b/vma.h
 new file mode 100644
-index 0000000000..c895c97f6d
+index 0000000000..1b62859165
 --- /dev/null
 +++ b/vma.h
 @@ -0,0 +1,150 @@
@@ -2722,7 +2767,7 @@ index 0000000000..c895c97f6d
 +VmaDeviceInfo *vma_reader_get_device_info(VmaReader *vmar, guint8 dev_id);
 +int vma_reader_register_bs(VmaReader *vmar, guint8 dev_id,
 +                           BlockBackend *target, bool write_zeroes,
-+                           Error **errp);
++                           bool skip, Error **errp);
 +int vma_reader_restore(VmaReader *vmar, int vmstate_fd, bool verbose,
 +                       Error **errp);
 +int vma_reader_verify(VmaReader *vmar, bool verbose, Error **errp);

debian/patches/pve/0028-PVE-Backup-add-backup-dump-block-driver.patch

@@ -9,18 +9,20 @@ Subject: [PATCH] PVE-Backup: add backup-dump block driver
 - job.c: make job_should_pause non-static
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to coroutine changes]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/backup-dump.c       | 168 ++++++++++++++++++++++++++++++++++++++
- block/backup.c            |  30 ++-----
- block/meson.build         |   1 +
- include/block/block_int.h |  35 ++++++++
- job.c                     |   3 +-
+ block/backup-dump.c              | 168 +++++++++++++++++++++++++++++++
+ block/backup.c                   |  30 ++----
+ block/meson.build                |   1 +
+ include/block/block_int-common.h |  35 +++++++
+ job.c                            |   3 +-
  5 files changed, 214 insertions(+), 23 deletions(-)
  create mode 100644 block/backup-dump.c
 
 diff --git a/block/backup-dump.c b/block/backup-dump.c
 new file mode 100644
-index 0000000000..93d7f46950
+index 0000000000..232a094426
 --- /dev/null
 +++ b/block/backup-dump.c
 @@ -0,0 +1,168 @@
@@ -35,7 +37,6 @@ index 0000000000..93d7f46950
 + */
 +
 +#include "qemu/osdep.h"
-+#include "qemu-common.h"
 +#include "qom/object_interfaces.h"
 +#include "block/block_int.h"
 +
@@ -46,7 +47,8 @@ index 0000000000..93d7f46950
 +    void           *dump_cb_data;
 +} BDRVBackupDumpState;
 +
-+static int qemu_backup_dump_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
++static coroutine_fn int qemu_backup_dump_co_get_info(BlockDriverState *bs,
++                                                     BlockDriverInfo *bdi)
 +{
 +    BDRVBackupDumpState *s = bs->opaque;
 +
@@ -87,7 +89,7 @@ index 0000000000..93d7f46950
 +    /* Nothing to do. */
 +}
 +
-+static int64_t qemu_backup_dump_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t qemu_backup_dump_co_getlength(BlockDriverState *bs)
 +{
 +    BDRVBackupDumpState *s = bs->opaque;
 +
@@ -147,8 +149,8 @@ index 0000000000..93d7f46950
 +
 +    .bdrv_close                   = qemu_backup_dump_close,
 +    .bdrv_has_zero_init           = bdrv_has_zero_init_1,
-+    .bdrv_getlength               = qemu_backup_dump_getlength,
-+    .bdrv_get_info                = qemu_backup_dump_get_info,
++    .bdrv_co_getlength            = qemu_backup_dump_co_getlength,
++    .bdrv_co_get_info             = qemu_backup_dump_co_get_info,
 +
 +    .bdrv_co_writev               = qemu_backup_dump_co_writev,
 +
@@ -193,7 +195,7 @@ index 0000000000..93d7f46950
 +    return bs;
 +}
 diff --git a/block/backup.c b/block/backup.c
-index 47e218857d..4d8fad70c4 100644
+index 39410dcf8d..af87fa6aa9 100644
 --- a/block/backup.c
 +++ b/block/backup.c
 @@ -29,28 +29,6 @@
@@ -225,7 +227,7 @@ index 47e218857d..4d8fad70c4 100644
  static const BlockJobDriver backup_job_driver;
  
  static void backup_cleanup_sync_bitmap(BackupBlockJob *job, int ret)
-@@ -455,6 +433,14 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+@@ -457,6 +435,14 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
      }
  
      cluster_size = block_copy_cluster_size(bcs);
@@ -241,7 +243,7 @@ index 47e218857d..4d8fad70c4 100644
      if (perf->max_chunk && perf->max_chunk < cluster_size) {
          error_setg(errp, "Required max-chunk (%" PRIi64 ") is less than backup "
 diff --git a/block/meson.build b/block/meson.build
-index 72081a9974..7883df047c 100644
+index 744b698a82..f580f95395 100644
 --- a/block/meson.build
 +++ b/block/meson.build
 @@ -4,6 +4,7 @@ block_ss.add(files(
@@ -252,25 +254,25 @@ index 72081a9974..7883df047c 100644
    'copy-before-write.c',
    'blkdebug.c',
    'blklogwrites.c',
-diff --git a/include/block/block_int.h b/include/block/block_int.h
-index f4c75e8ba9..169dc43d59 100644
---- a/include/block/block_int.h
-+++ b/include/block/block_int.h
+diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h
+index f01bb8b617..d7ffd1826e 100644
+--- a/include/block/block_int-common.h
++++ b/include/block/block_int-common.h
 @@ -26,6 +26,7 @@
  
- #include "block/accounting.h"
- #include "block/block.h"
+ #include "block/aio.h"
+ #include "block/block-common.h"
 +#include "block/block-copy.h"
- #include "block/aio-wait.h"
- #include "qemu/queue.h"
- #include "qemu/coroutine.h"
-@@ -64,6 +65,40 @@
+ #include "block/block-global-state.h"
+ #include "block/snapshot.h"
+ #include "qemu/iov.h"
+@@ -60,6 +61,40 @@
  
  #define BLOCK_PROBE_BUF_SIZE        512
  
 +typedef int BackupDumpFunc(void *opaque, uint64_t offset, uint64_t bytes, const void *buf);
 +
-+BlockDriverState *bdrv_backuo_dump_create(
++BlockDriverState *bdrv_backup_dump_create(
 +    int dump_cb_block_size,
 +    uint64_t byte_size,
 +    BackupDumpFunc *dump_cb,
@@ -306,16 +308,16 @@ index f4c75e8ba9..169dc43d59 100644
      BDRV_TRACKED_READ,
      BDRV_TRACKED_WRITE,
 diff --git a/job.c b/job.c
-index dbfa67bb0a..af25dd5b98 100644
+index 72d57f0934..93e22d180b 100644
 --- a/job.c
 +++ b/job.c
-@@ -276,7 +276,8 @@ static bool job_started(Job *job)
-     return job->co;
+@@ -330,7 +330,8 @@ static bool job_started_locked(Job *job)
  }
  
--static bool job_should_pause(Job *job)
-+bool job_should_pause(Job *job);
-+bool job_should_pause(Job *job)
+ /* Called with job_mutex held. */
+-static bool job_should_pause_locked(Job *job)
++bool job_should_pause_locked(Job *job);
++bool job_should_pause_locked(Job *job)
  {
      return job->pause_count > 0;
  }

debian/patches/pve/0029-PVE-Add-sequential-job-transaction-support.patch

@@ -7,14 +7,14 @@ Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  include/qemu/job.h | 12 ++++++++++++
- job.c              | 31 +++++++++++++++++++++++++++++++
- 2 files changed, 43 insertions(+)
+ job.c              | 34 ++++++++++++++++++++++++++++++++++
+ 2 files changed, 46 insertions(+)
 
 diff --git a/include/qemu/job.h b/include/qemu/job.h
-index 6e67b6977f..60376c99ee 100644
+index e502787dd8..963cf2bef5 100644
 --- a/include/qemu/job.h
 +++ b/include/qemu/job.h
-@@ -294,6 +294,18 @@ typedef enum JobCreateFlags {
+@@ -381,6 +381,18 @@ void job_unlock(void);
   */
  JobTxn *job_txn_new(void);
  
@@ -34,10 +34,10 @@ index 6e67b6977f..60376c99ee 100644
   * Release a reference that was previously acquired with job_txn_add_job or
   * job_txn_new. If it's the last reference to the object, it will be freed.
 diff --git a/job.c b/job.c
-index af25dd5b98..d0d152e697 100644
+index 93e22d180b..2b31f1e14f 100644
 --- a/job.c
 +++ b/job.c
-@@ -72,6 +72,8 @@ struct JobTxn {
+@@ -93,6 +93,8 @@ struct JobTxn {
  
      /* Reference count */
      int refcnt;
@@ -45,8 +45,8 @@ index af25dd5b98..d0d152e697 100644
 +    bool sequential;
  };
  
- /* Right now, this mutex is only needed to synchronize accesses to job->busy
-@@ -102,6 +104,25 @@ JobTxn *job_txn_new(void)
+ void job_lock(void)
+@@ -118,6 +120,25 @@ JobTxn *job_txn_new(void)
      return txn;
  }
  
@@ -69,20 +69,23 @@ index af25dd5b98..d0d152e697 100644
 +    job_start(first);
 +}
 +
- static void job_txn_ref(JobTxn *txn)
+ /* Called with job_mutex held. */
+ static void job_txn_ref_locked(JobTxn *txn)
  {
-     txn->refcnt++;
-@@ -888,6 +909,9 @@ static void job_completed_txn_success(Job *job)
+@@ -1057,6 +1078,12 @@ static void job_completed_txn_success_locked(Job *job)
       */
      QLIST_FOREACH(other_job, &txn->jobs, txn_list) {
-         if (!job_is_completed(other_job)) {
+         if (!job_is_completed_locked(other_job)) {
 +            if (txn->sequential) {
++                job_unlock();
++                /* Needs to be called without holding the job lock */
 +                job_start(other_job);
++                job_lock();
 +            }
              return;
          }
          assert(other_job->ret == 0);
-@@ -1082,6 +1106,13 @@ int job_finish_sync(Job *job, void (*finish)(Job *, Error **errp), Error **errp)
+@@ -1268,6 +1295,13 @@ int job_finish_sync_locked(Job *job,
          return -EBUSY;
      }
  
@@ -90,9 +93,9 @@ index af25dd5b98..d0d152e697 100644
 +     * of cancelling, these have not begun work so job_enter won't do anything,
 +     * let's ensure they are marked as ABORTING if required */
 +    if (job->status == JOB_STATUS_CREATED && job->txn->sequential) {
-+        job_update_rc(job);
++        job_update_rc_locked(job);
 +    }
 +
-     AIO_WAIT_WHILE(job->aio_context,
-                    (job_enter(job), !job_is_completed(job)));
- 
+     job_unlock();
+     AIO_WAIT_WHILE_UNLOCKED(job->aio_context,
+                             (job_enter(job), !job_is_completed(job)));

debian/patches/pve/0030-PVE-Backup-Add-dirty-bitmap-tracking-for-incremental.patch

@@ -1,452 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Mon, 29 Jun 2020 11:06:03 +0200
-Subject: [PATCH] PVE-Backup: Add dirty-bitmap tracking for incremental backups
-
-Uses QEMU's existing MIRROR_SYNC_MODE_BITMAP and a dirty-bitmap on top
-of all backed-up drives. This will only execute the data-write callback
-for any changed chunks, the PBS rust code will reuse chunks from the
-previous index for everything it doesn't receive if reuse_index is true.
-
-On error or cancellation, remove all dirty bitmaps to ensure
-consistency.
-
-Add PBS/incremental specific information to query backup info QMP and
-HMP commands.
-
-Only supported for PBS backups.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- block/monitor/block-hmp-cmds.c |   1 +
- monitor/hmp-cmds.c             |  45 ++++++++++----
- proxmox-backup-client.c        |   3 +-
- proxmox-backup-client.h        |   1 +
- pve-backup.c                   | 103 ++++++++++++++++++++++++++++++---
- qapi/block-core.json           |  12 +++-
- 6 files changed, 142 insertions(+), 23 deletions(-)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index f6668ab01d..3c06734e6d 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1042,6 +1042,7 @@ void hmp_backup(Monitor *mon, const QDict *qdict)
-         false, NULL, // PBS fingerprint
-         false, NULL, // PBS backup-id
-         false, 0, // PBS backup-time
-+        false, false, // PBS incremental
-         true, dir ? BACKUP_FORMAT_DIR : BACKUP_FORMAT_VMA,
-         false, NULL, false, NULL, !!devlist,
-         devlist, qdict_haskey(qdict, "speed"), speed, &error);
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index b2687eae3a..cfd7a60f32 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -221,19 +221,42 @@ void hmp_info_backup(Monitor *mon, const QDict *qdict)
-             monitor_printf(mon, "End time: %s", ctime(&info->end_time));
-         }
- 
--        int per = (info->has_total && info->total &&
--            info->has_transferred && info->transferred) ?
--            (info->transferred * 100)/info->total : 0;
--        int zero_per = (info->has_total && info->total &&
--                        info->has_zero_bytes && info->zero_bytes) ?
--            (info->zero_bytes * 100)/info->total : 0;
-         monitor_printf(mon, "Backup file: %s\n", info->backup_file);
-         monitor_printf(mon, "Backup uuid: %s\n", info->uuid);
--        monitor_printf(mon, "Total size: %zd\n", info->total);
--        monitor_printf(mon, "Transferred bytes: %zd (%d%%)\n",
--                       info->transferred, per);
--        monitor_printf(mon, "Zero bytes: %zd (%d%%)\n",
--                       info->zero_bytes, zero_per);
-+
-+        if (!(info->has_total && info->total))  {
-+            // this should not happen normally
-+            monitor_printf(mon, "Total size: %d\n", 0);
-+        } else {
-+            bool incremental = false;
-+            size_t total_or_dirty = info->total;
-+            if (info->has_transferred) {
-+                if (info->has_dirty && info->dirty) {
-+                     if (info->dirty < info->total) {
-+                        total_or_dirty = info->dirty;
-+                        incremental = true;
-+                    }
-+                }
-+            }
-+
-+            int per = (info->transferred * 100)/total_or_dirty;
-+
-+            monitor_printf(mon, "Backup mode: %s\n", incremental ? "incremental" : "full");
-+
-+            int zero_per = (info->has_zero_bytes && info->zero_bytes) ?
-+                (info->zero_bytes * 100)/info->total : 0;
-+            monitor_printf(mon, "Total size: %zd\n", info->total);
-+            monitor_printf(mon, "Transferred bytes: %zd (%d%%)\n",
-+                           info->transferred, per);
-+            monitor_printf(mon, "Zero bytes: %zd (%d%%)\n",
-+                           info->zero_bytes, zero_per);
-+
-+            if (info->has_reused) {
-+                int reused_per = (info->reused * 100)/total_or_dirty;
-+                monitor_printf(mon, "Reused bytes: %zd (%d%%)\n",
-+                               info->reused, reused_per);
-+            }
-+        }
-     }
- 
-     qapi_free_BackupStatus(info);
-diff --git a/proxmox-backup-client.c b/proxmox-backup-client.c
-index a8f6653a81..4ce7bc0b5e 100644
---- a/proxmox-backup-client.c
-+++ b/proxmox-backup-client.c
-@@ -89,6 +89,7 @@ proxmox_backup_co_register_image(
-     ProxmoxBackupHandle *pbs,
-     const char *device_name,
-     uint64_t size,
-+    bool incremental,
-     Error **errp)
- {
-     Coroutine *co = qemu_coroutine_self();
-@@ -98,7 +99,7 @@ proxmox_backup_co_register_image(
-     int pbs_res = -1;
- 
-     proxmox_backup_register_image_async(
--        pbs, device_name, size ,proxmox_backup_schedule_wake, &waker, &pbs_res, &pbs_err);
-+        pbs, device_name, size, incremental, proxmox_backup_schedule_wake, &waker, &pbs_res, &pbs_err);
-     qemu_coroutine_yield();
-     if (pbs_res < 0) {
-         if (errp) error_setg(errp, "backup register image failed: %s", pbs_err ? pbs_err : "unknown error");
-diff --git a/proxmox-backup-client.h b/proxmox-backup-client.h
-index 1dda8b7d8f..8cbf645b2c 100644
---- a/proxmox-backup-client.h
-+++ b/proxmox-backup-client.h
-@@ -32,6 +32,7 @@ proxmox_backup_co_register_image(
-     ProxmoxBackupHandle *pbs,
-     const char *device_name,
-     uint64_t size,
-+    bool incremental,
-     Error **errp);
- 
- 
-diff --git a/pve-backup.c b/pve-backup.c
-index 88f5ee133f..1c49cd178d 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -28,6 +28,8 @@
-  *
-  */
- 
-+const char *PBS_BITMAP_NAME = "pbs-incremental-dirty-bitmap";
-+
- static struct PVEBackupState {
-     struct {
-         // Everithing accessed from qmp_backup_query command is protected using lock
-@@ -39,7 +41,9 @@ static struct PVEBackupState {
-         uuid_t uuid;
-         char uuid_str[37];
-         size_t total;
-+        size_t dirty;
-         size_t transferred;
-+        size_t reused;
-         size_t zero_bytes;
-     } stat;
-     int64_t speed;
-@@ -66,6 +70,7 @@ typedef struct PVEBackupDevInfo {
-     uint8_t dev_id;
-     bool completed;
-     char targetfile[PATH_MAX];
-+    BdrvDirtyBitmap *bitmap;
-     BlockDriverState *target;
- } PVEBackupDevInfo;
- 
-@@ -105,11 +110,12 @@ static bool pvebackup_error_or_canceled(void)
-     return error_or_canceled;
- }
- 
--static void pvebackup_add_transfered_bytes(size_t transferred, size_t zero_bytes)
-+static void pvebackup_add_transfered_bytes(size_t transferred, size_t zero_bytes, size_t reused)
- {
-     qemu_mutex_lock(&backup_state.stat.lock);
-     backup_state.stat.zero_bytes += zero_bytes;
-     backup_state.stat.transferred += transferred;
-+    backup_state.stat.reused += reused;
-     qemu_mutex_unlock(&backup_state.stat.lock);
- }
- 
-@@ -148,7 +154,8 @@ pvebackup_co_dump_pbs_cb(
-         pvebackup_propagate_error(local_err);
-         return pbs_res;
-     } else {
--        pvebackup_add_transfered_bytes(size, !buf ? size : 0);
-+        size_t reused = (pbs_res == 0) ? size : 0;
-+        pvebackup_add_transfered_bytes(size, !buf ? size : 0, reused);
-     }
- 
-     return size;
-@@ -208,11 +215,11 @@ pvebackup_co_dump_vma_cb(
-         } else {
-             if (remaining >= VMA_CLUSTER_SIZE) {
-                 assert(ret == VMA_CLUSTER_SIZE);
--                pvebackup_add_transfered_bytes(VMA_CLUSTER_SIZE, zero_bytes);
-+                pvebackup_add_transfered_bytes(VMA_CLUSTER_SIZE, zero_bytes, 0);
-                 remaining -= VMA_CLUSTER_SIZE;
-             } else {
-                 assert(ret == remaining);
--                pvebackup_add_transfered_bytes(remaining, zero_bytes);
-+                pvebackup_add_transfered_bytes(remaining, zero_bytes, 0);
-                 remaining = 0;
-             }
-         }
-@@ -248,6 +255,18 @@ static void coroutine_fn pvebackup_co_cleanup(void *unused)
-             if (local_err != NULL) {
-                 pvebackup_propagate_error(local_err);
-             }
-+        } else {
-+            // on error or cancel we cannot ensure synchronization of dirty
-+            // bitmaps with backup server, so remove all and do full backup next
-+            GList *l = backup_state.di_list;
-+            while (l) {
-+                PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-+                l = g_list_next(l);
-+
-+                if (di->bitmap) {
-+                    bdrv_release_dirty_bitmap(di->bitmap);
-+                }
-+            }
-         }
- 
-         proxmox_backup_disconnect(backup_state.pbs);
-@@ -303,6 +322,12 @@ static void pvebackup_complete_cb(void *opaque, int ret)
-     // remove self from job queue
-     backup_state.di_list = g_list_remove(backup_state.di_list, di);
- 
-+    if (di->bitmap && ret < 0) {
-+        // on error or cancel we cannot ensure synchronization of dirty
-+        // bitmaps with backup server, so remove all and do full backup next
-+        bdrv_release_dirty_bitmap(di->bitmap);
-+    }
-+
-     g_free(di);
- 
-     qemu_mutex_unlock(&backup_state.backup_mutex);
-@@ -472,12 +497,18 @@ static bool create_backup_jobs(void) {
- 
-         assert(di->target != NULL);
- 
-+        MirrorSyncMode sync_mode = MIRROR_SYNC_MODE_FULL;
-+        BitmapSyncMode bitmap_mode = BITMAP_SYNC_MODE_NEVER;
-+        if (di->bitmap) {
-+            sync_mode = MIRROR_SYNC_MODE_BITMAP;
-+            bitmap_mode = BITMAP_SYNC_MODE_ON_SUCCESS;
-+        }
-         AioContext *aio_context = bdrv_get_aio_context(di->bs);
-         aio_context_acquire(aio_context);
- 
-         BlockJob *job = backup_job_create(
--            NULL, di->bs, di->target, backup_state.speed, MIRROR_SYNC_MODE_FULL, NULL,
--            BITMAP_SYNC_MODE_NEVER, false, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
-+            NULL, di->bs, di->target, backup_state.speed, sync_mode, di->bitmap,
-+            bitmap_mode, false, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
-             JOB_DEFAULT, pvebackup_complete_cb, di, NULL, &local_err);
- 
-         aio_context_release(aio_context);
-@@ -528,6 +559,8 @@ typedef struct QmpBackupTask {
-     const char *fingerprint;
-     bool has_fingerprint;
-     int64_t backup_time;
-+    bool has_use_dirty_bitmap;
-+    bool use_dirty_bitmap;
-     bool has_format;
-     BackupFormat format;
-     bool has_config_file;
-@@ -619,6 +652,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     }
- 
-     size_t total = 0;
-+    size_t dirty = 0;
- 
-     l = di_list;
-     while (l) {
-@@ -656,6 +690,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-         int dump_cb_block_size = PROXMOX_BACKUP_DEFAULT_CHUNK_SIZE; // Hardcoded (4M)
-         firewall_name = "fw.conf";
- 
-+        bool use_dirty_bitmap = task->has_use_dirty_bitmap && task->use_dirty_bitmap;
-+
-         char *pbs_err = NULL;
-         pbs = proxmox_backup_new(
-             task->backup_file,
-@@ -675,7 +711,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             goto err;
-         }
- 
--        if (proxmox_backup_co_connect(pbs, task->errp) < 0)
-+        int connect_result = proxmox_backup_co_connect(pbs, task->errp);
-+        if (connect_result < 0)
-             goto err;
- 
-         /* register all devices */
-@@ -686,9 +723,40 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
- 
-             const char *devname = bdrv_get_device_name(di->bs);
- 
--            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, task->errp);
--            if (dev_id < 0)
-+            BdrvDirtyBitmap *bitmap = bdrv_find_dirty_bitmap(di->bs, PBS_BITMAP_NAME);
-+            bool expect_only_dirty = false;
-+
-+            if (use_dirty_bitmap) {
-+                if (bitmap == NULL) {
-+                    bitmap = bdrv_create_dirty_bitmap(di->bs, dump_cb_block_size, PBS_BITMAP_NAME, task->errp);
-+                    if (!bitmap) {
-+                        goto err;
-+                    }
-+                } else {
-+                    expect_only_dirty = proxmox_backup_check_incremental(pbs, devname, di->size) != 0;
-+                }
-+
-+                if (expect_only_dirty) {
-+                    dirty += bdrv_get_dirty_count(bitmap);
-+                } else {
-+                    /* mark entire bitmap as dirty to make full backup */
-+                    bdrv_set_dirty_bitmap(bitmap, 0, di->size);
-+                    dirty += di->size;
-+                }
-+                di->bitmap = bitmap;
-+            } else {
-+                dirty += di->size;
-+
-+                /* after a full backup the old dirty bitmap is invalid anyway */
-+                if (bitmap != NULL) {
-+                    bdrv_release_dirty_bitmap(bitmap);
-+                }
-+            }
-+
-+            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, task->errp);
-+            if (dev_id < 0) {
-                 goto err;
-+            }
- 
-             if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, task->errp))) {
-                 goto err;
-@@ -697,6 +765,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             di->dev_id = dev_id;
-         }
-     } else if (format == BACKUP_FORMAT_VMA) {
-+        dirty = total;
-+
-         vmaw = vma_writer_create(task->backup_file, uuid, &local_err);
-         if (!vmaw) {
-             if (local_err) {
-@@ -724,6 +794,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             }
-         }
-     } else if (format == BACKUP_FORMAT_DIR) {
-+        dirty = total;
-+
-         if (mkdir(task->backup_file, 0640) != 0) {
-             error_setg_errno(task->errp, errno, "can't create directory '%s'\n",
-                              task->backup_file);
-@@ -796,8 +868,10 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     char *uuid_str = g_strdup(backup_state.stat.uuid_str);
- 
-     backup_state.stat.total = total;
-+    backup_state.stat.dirty = dirty;
-     backup_state.stat.transferred = 0;
-     backup_state.stat.zero_bytes = 0;
-+    backup_state.stat.reused = format == BACKUP_FORMAT_PBS && dirty >= total ? 0 : total - dirty;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-@@ -821,6 +895,10 @@ err:
-         PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-         l = g_list_next(l);
- 
-+        if (di->bitmap) {
-+            bdrv_release_dirty_bitmap(di->bitmap);
-+        }
-+
-         if (di->target) {
-             bdrv_unref(di->target);
-         }
-@@ -862,6 +940,7 @@ UuidInfo *qmp_backup(
-     bool has_fingerprint, const char *fingerprint,
-     bool has_backup_id, const char *backup_id,
-     bool has_backup_time, int64_t backup_time,
-+    bool has_use_dirty_bitmap, bool use_dirty_bitmap,
-     bool has_format, BackupFormat format,
-     bool has_config_file, const char *config_file,
-     bool has_firewall_file, const char *firewall_file,
-@@ -880,6 +959,8 @@ UuidInfo *qmp_backup(
-         .backup_id = backup_id,
-         .has_backup_time = has_backup_time,
-         .backup_time = backup_time,
-+        .has_use_dirty_bitmap = has_use_dirty_bitmap,
-+        .use_dirty_bitmap = use_dirty_bitmap,
-         .has_format = has_format,
-         .format = format,
-         .has_config_file = has_config_file,
-@@ -948,10 +1029,14 @@ BackupStatus *qmp_query_backup(Error **errp)
- 
-     info->has_total = true;
-     info->total = backup_state.stat.total;
-+    info->has_dirty = true;
-+    info->dirty = backup_state.stat.dirty;
-     info->has_zero_bytes = true;
-     info->zero_bytes = backup_state.stat.zero_bytes;
-     info->has_transferred = true;
-     info->transferred = backup_state.stat.transferred;
-+    info->has_reused = true;
-+    info->reused = backup_state.stat.reused;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 551ee28275..b9d6f52f0c 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -757,8 +757,13 @@
- #
- # @total: total amount of bytes involved in the backup process
- #
-+# @dirty: with incremental mode (PBS) this is the amount of bytes involved
-+#         in the backup process which are marked dirty.
-+#
- # @transferred: amount of bytes already backed up.
- #
-+# @reused: amount of bytes reused due to deduplication.
-+#
- # @zero-bytes: amount of 'zero' bytes detected.
- #
- # @start-time: time (epoch) when backup job started.
-@@ -771,8 +776,8 @@
- #
- ##
- { 'struct': 'BackupStatus',
--  'data': {'*status': 'str', '*errmsg': 'str', '*total': 'int',
--           '*transferred': 'int', '*zero-bytes': 'int',
-+  'data': {'*status': 'str', '*errmsg': 'str', '*total': 'int', '*dirty': 'int',
-+           '*transferred': 'int', '*zero-bytes': 'int', '*reused': 'int',
-            '*start-time': 'int', '*end-time': 'int',
-            '*backup-file': 'str', '*uuid': 'str' } }
- 
-@@ -815,6 +820,8 @@
- #
- # @backup-time: backup timestamp (Unix epoch, required for format 'pbs')
- #
-+# @use-dirty-bitmap: use dirty bitmap to detect incremental changes since last job (optional for format 'pbs')
-+#
- # Returns: the uuid of the backup job
- #
- ##
-@@ -825,6 +832,7 @@
-                                     '*fingerprint': 'str',
-                                     '*backup-id': 'str',
-                                     '*backup-time': 'int',
-+                                    '*use-dirty-bitmap': 'bool',
-                                     '*format': 'BackupFormat',
-                                     '*config-file': 'str',
-                                     '*firewall-file': 'str',

debian/patches/pve/0031-PVE-Backup-pbs-restore-new-command-to-restore-from-p.patch

@@ -5,17 +5,19 @@ Subject: [PATCH] PVE-Backup: pbs-restore - new command to restore from proxmox
  backup server
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[WB: add namespace support]
+Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 ---
  meson.build   |   4 +
- pbs-restore.c | 224 ++++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 228 insertions(+)
+ pbs-restore.c | 236 ++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 240 insertions(+)
  create mode 100644 pbs-restore.c
 
 diff --git a/meson.build b/meson.build
-index 37dab249cc..1a4dfab4e2 100644
+index 443b3238f9..32ab849ce6 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -3076,6 +3076,10 @@ if have_tools
+@@ -3656,6 +3656,10 @@ if have_tools
    vma = executable('vma', files('vma.c', 'vma-reader.c') + genh,
                     dependencies: [authz, block, crypto, io, qom], install: true)
  
@@ -28,10 +30,10 @@ index 37dab249cc..1a4dfab4e2 100644
    subdir('contrib/elf2dmp')
 diff --git a/pbs-restore.c b/pbs-restore.c
 new file mode 100644
-index 0000000000..4d3f925a1b
+index 0000000000..f03d9bab8d
 --- /dev/null
 +++ b/pbs-restore.c
-@@ -0,0 +1,224 @@
+@@ -0,0 +1,236 @@
 +/*
 + * Qemu image restore helper for Proxmox Backup
 + *
@@ -50,7 +52,6 @@ index 0000000000..4d3f925a1b
 +#include <getopt.h>
 +#include <string.h>
 +
-+#include "qemu-common.h"
 +#include "qemu/module.h"
 +#include "qemu/error-report.h"
 +#include "qemu/main-loop.h"
@@ -64,7 +65,7 @@ index 0000000000..4d3f925a1b
 +static void help(void)
 +{
 +    const char *help_msg =
-+        "usage: pbs-restore [--repository <repo>] snapshot archive-name target [command options]\n"
++        "usage: pbs-restore [--repository <repo>] [--ns namespace] snapshot archive-name target [command options]\n"
 +        ;
 +
 +    printf("%s", help_msg);
@@ -96,7 +97,7 @@ index 0000000000..4d3f925a1b
 +        }
 +        res = blk_pwrite_zeroes(callback_data->target, offset, data_len, 0);
 +    } else {
-+        res = blk_pwrite(callback_data->target, offset, data, data_len, 0);
++        res = blk_pwrite(callback_data->target, offset, data_len, data, 0);
 +    }
 +
 +    if (res < 0) {
@@ -112,6 +113,7 @@ index 0000000000..4d3f925a1b
 +    Error *main_loop_err = NULL;
 +    const char *format = "raw";
 +    const char *repository = NULL;
++    const char *backup_ns = NULL;
 +    const char *keyfile = NULL;
 +    int verbose = false;
 +    bool skip_zero = false;
@@ -125,6 +127,7 @@ index 0000000000..4d3f925a1b
 +            {"verbose", no_argument, 0, 'v'},
 +            {"format", required_argument, 0, 'f'},
 +            {"repository", required_argument, 0, 'r'},
++            {"ns", required_argument, 0, 'n'},
 +            {"keyfile", required_argument, 0, 'k'},
 +            {0, 0, 0, 0}
 +        };
@@ -145,6 +148,9 @@ index 0000000000..4d3f925a1b
 +            case 'r':
 +                repository = g_strdup(argv[optind - 1]);
 +                break;
++            case 'n':
++                backup_ns = g_strdup(argv[optind - 1]);
++                break;
 +            case 'k':
 +                keyfile = g_strdup(argv[optind - 1]);
 +                break;
@@ -195,8 +201,16 @@ index 0000000000..4d3f925a1b
 +        fprintf(stderr, "connecting to repository '%s'\n", repository);
 +    }
 +    char *pbs_error = NULL;
-+    ProxmoxRestoreHandle *conn = proxmox_restore_new(
-+        repository, snapshot, password, keyfile, key_password, fingerprint, &pbs_error);
++    ProxmoxRestoreHandle *conn = proxmox_restore_new_ns(
++        repository,
++        snapshot,
++        backup_ns,
++        password,
++        keyfile,
++        key_password,
++        fingerprint,
++        &pbs_error
++    );
 +    if (conn == NULL) {
 +        fprintf(stderr, "restore failed: %s\n", pbs_error);
 +        return -1;

debian/patches/pve/0031-PVE-various-PBS-fixes.patch

@@ -1,219 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Dietmar Maurer <dietmar@proxmox.com>
-Date: Thu, 9 Jul 2020 12:53:08 +0200
-Subject: [PATCH] PVE: various PBS fixes
-
-pbs: fix crypt and compress parameters
-Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
-
-PVE: handle PBS write callback with big blocks correctly
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-
-PVE: add zero block handling to PBS dump callback
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- block/monitor/block-hmp-cmds.c |  4 ++-
- pve-backup.c                   | 57 +++++++++++++++++++++++++++-------
- qapi/block-core.json           |  6 ++++
- 3 files changed, 54 insertions(+), 13 deletions(-)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index 3c06734e6d..4481b60a5c 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1042,7 +1042,9 @@ void hmp_backup(Monitor *mon, const QDict *qdict)
-         false, NULL, // PBS fingerprint
-         false, NULL, // PBS backup-id
-         false, 0, // PBS backup-time
--        false, false, // PBS incremental
-+        false, false, // PBS use-dirty-bitmap
-+        false, false, // PBS compress
-+        false, false, // PBS encrypt
-         true, dir ? BACKUP_FORMAT_DIR : BACKUP_FORMAT_VMA,
-         false, NULL, false, NULL, !!devlist,
-         devlist, qdict_haskey(qdict, "speed"), speed, &error);
-diff --git a/pve-backup.c b/pve-backup.c
-index 1c49cd178d..c15abefdda 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -8,6 +8,7 @@
- #include "block/blockjob.h"
- #include "qapi/qapi-commands-block.h"
- #include "qapi/qmp/qerror.h"
-+#include "qemu/cutils.h"
- 
- /* PVE backup state and related function */
- 
-@@ -67,6 +68,7 @@ opts_init(pvebackup_init);
- typedef struct PVEBackupDevInfo {
-     BlockDriverState *bs;
-     size_t size;
-+    uint64_t block_size;
-     uint8_t dev_id;
-     bool completed;
-     char targetfile[PATH_MAX];
-@@ -135,10 +137,13 @@ pvebackup_co_dump_pbs_cb(
-     PVEBackupDevInfo *di = opaque;
- 
-     assert(backup_state.pbs);
-+    assert(buf);
- 
-     Error *local_err = NULL;
-     int pbs_res = -1;
- 
-+    bool is_zero_block = size == di->block_size && buffer_is_zero(buf, size);
-+
-     qemu_co_mutex_lock(&backup_state.dump_callback_mutex);
- 
-     // avoid deadlock if job is cancelled
-@@ -147,17 +152,29 @@ pvebackup_co_dump_pbs_cb(
-         return -1;
-     }
- 
--    pbs_res = proxmox_backup_co_write_data(backup_state.pbs, di->dev_id, buf, start, size, &local_err);
--    qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
-+    uint64_t transferred = 0;
-+    uint64_t reused = 0;
-+    while (transferred < size) {
-+        uint64_t left = size - transferred;
-+        uint64_t to_transfer = left < di->block_size ? left : di->block_size;
- 
--    if (pbs_res < 0) {
--        pvebackup_propagate_error(local_err);
--        return pbs_res;
--    } else {
--        size_t reused = (pbs_res == 0) ? size : 0;
--        pvebackup_add_transfered_bytes(size, !buf ? size : 0, reused);
-+        pbs_res = proxmox_backup_co_write_data(backup_state.pbs, di->dev_id,
-+            is_zero_block ? NULL : buf + transferred, start + transferred,
-+            to_transfer, &local_err);
-+        transferred += to_transfer;
-+
-+        if (pbs_res < 0) {
-+            pvebackup_propagate_error(local_err);
-+            qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
-+            return pbs_res;
-+        }
-+
-+        reused += pbs_res == 0 ? to_transfer : 0;
-     }
- 
-+    qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
-+    pvebackup_add_transfered_bytes(size, is_zero_block ? size : 0, reused);
-+
-     return size;
- }
- 
-@@ -178,6 +195,7 @@ pvebackup_co_dump_vma_cb(
-     int ret = -1;
- 
-     assert(backup_state.vmaw);
-+    assert(buf);
- 
-     uint64_t remaining = size;
- 
-@@ -204,9 +222,7 @@ pvebackup_co_dump_vma_cb(
-         qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
- 
-         ++cluster_num;
--        if (buf) {
--            buf += VMA_CLUSTER_SIZE;
--        }
-+        buf += VMA_CLUSTER_SIZE;
-         if (ret < 0) {
-             Error *local_err = NULL;
-             vma_writer_error_propagate(backup_state.vmaw, &local_err);
-@@ -569,6 +585,10 @@ typedef struct QmpBackupTask {
-     const char *firewall_file;
-     bool has_devlist;
-     const char *devlist;
-+    bool has_compress;
-+    bool compress;
-+    bool has_encrypt;
-+    bool encrypt;
-     bool has_speed;
-     int64_t speed;
-     Error **errp;
-@@ -692,6 +712,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
- 
-         bool use_dirty_bitmap = task->has_use_dirty_bitmap && task->use_dirty_bitmap;
- 
-+
-         char *pbs_err = NULL;
-         pbs = proxmox_backup_new(
-             task->backup_file,
-@@ -701,8 +722,10 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             task->has_password ? task->password : NULL,
-             task->has_keyfile ? task->keyfile : NULL,
-             task->has_key_password ? task->key_password : NULL,
-+            task->has_compress ? task->compress : true,
-+            task->has_encrypt ? task->encrypt : task->has_keyfile,
-             task->has_fingerprint ? task->fingerprint : NULL,
--            &pbs_err);
-+             &pbs_err);
- 
-         if (!pbs) {
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-@@ -721,6 +744,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-             l = g_list_next(l);
- 
-+            di->block_size = dump_cb_block_size;
-+
-             const char *devname = bdrv_get_device_name(di->bs);
- 
-             BdrvDirtyBitmap *bitmap = bdrv_find_dirty_bitmap(di->bs, PBS_BITMAP_NAME);
-@@ -941,6 +966,8 @@ UuidInfo *qmp_backup(
-     bool has_backup_id, const char *backup_id,
-     bool has_backup_time, int64_t backup_time,
-     bool has_use_dirty_bitmap, bool use_dirty_bitmap,
-+    bool has_compress, bool compress,
-+    bool has_encrypt, bool encrypt,
-     bool has_format, BackupFormat format,
-     bool has_config_file, const char *config_file,
-     bool has_firewall_file, const char *firewall_file,
-@@ -951,6 +978,8 @@ UuidInfo *qmp_backup(
-         .backup_file = backup_file,
-         .has_password = has_password,
-         .password = password,
-+        .has_keyfile = has_keyfile,
-+        .keyfile = keyfile,
-         .has_key_password = has_key_password,
-         .key_password = key_password,
-         .has_fingerprint = has_fingerprint,
-@@ -961,6 +990,10 @@ UuidInfo *qmp_backup(
-         .backup_time = backup_time,
-         .has_use_dirty_bitmap = has_use_dirty_bitmap,
-         .use_dirty_bitmap = use_dirty_bitmap,
-+        .has_compress = has_compress,
-+        .compress = compress,
-+        .has_encrypt = has_encrypt,
-+        .encrypt = encrypt,
-         .has_format = has_format,
-         .format = format,
-         .has_config_file = has_config_file,
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index b9d6f52f0c..5d8e2eb303 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -822,6 +822,10 @@
- #
- # @use-dirty-bitmap: use dirty bitmap to detect incremental changes since last job (optional for format 'pbs')
- #
-+# @compress: use compression (optional for format 'pbs', defaults to true)
-+#
-+# @encrypt: use encryption ((optional for format 'pbs', defaults to true if there is a keyfile)
-+#
- # Returns: the uuid of the backup job
- #
- ##
-@@ -833,6 +837,8 @@
-                                     '*backup-id': 'str',
-                                     '*backup-time': 'int',
-                                     '*use-dirty-bitmap': 'bool',
-+                                    '*compress': 'bool',
-+                                    '*encrypt': 'bool',
-                                     '*format': 'BackupFormat',
-                                     '*config-file': 'str',
-                                     '*firewall-file': 'str',

debian/patches/pve/0032-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch

@@ -7,22 +7,27 @@ Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 [error cleanups, file_open implementation]
 Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[adapt to changed function signatures]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+[WB: add namespace support]
+Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
+[FE: adapt to changed function signatures
+     make pbs_co_preadv return values consistent with QEMU
+     getlength is now a coroutine function]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/meson.build    |   3 +
- block/pbs.c          | 276 +++++++++++++++++++++++++++++++++++++++++++
+ block/pbs.c          | 305 +++++++++++++++++++++++++++++++++++++++++++
  configure            |   9 ++
- meson.build          |   1 +
+ meson.build          |   2 +-
  qapi/block-core.json |  13 ++
- 5 files changed, 302 insertions(+)
+ qapi/pragma.json     |   1 +
+ 6 files changed, 332 insertions(+), 1 deletion(-)
  create mode 100644 block/pbs.c
 
 diff --git a/block/meson.build b/block/meson.build
-index 9d3dd5b7c3..8c758c0218 100644
+index 5bcebb934b..eece0d5743 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -51,6 +51,9 @@ block_ss.add(files(
+@@ -54,6 +54,9 @@ block_ss.add(files(
    '../pve-backup.c',
  ), libproxmox_backup_qemu)
  
@@ -31,13 +36,13 @@ index 9d3dd5b7c3..8c758c0218 100644
 +
  
  softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
- 
+ softmmu_ss.add(files('block-ram-registrar.c'))
 diff --git a/block/pbs.c b/block/pbs.c
 new file mode 100644
-index 0000000000..0b05ea9080
+index 0000000000..a2211e0f3b
 --- /dev/null
 +++ b/block/pbs.c
-@@ -0,0 +1,276 @@
+@@ -0,0 +1,305 @@
 +/*
 + * Proxmox Backup Server read-only block driver
 + */
@@ -50,10 +55,12 @@ index 0000000000..0b05ea9080
 +#include "qemu/option.h"
 +#include "qemu/cutils.h"
 +#include "block/block_int.h"
++#include "block/block-io.h"
 +
 +#include <proxmox-backup-qemu.h>
 +
 +#define PBS_OPT_REPOSITORY "repository"
++#define PBS_OPT_NAMESPACE "namespace"
 +#define PBS_OPT_SNAPSHOT "snapshot"
 +#define PBS_OPT_ARCHIVE "archive"
 +#define PBS_OPT_KEYFILE "keyfile"
@@ -67,6 +74,7 @@ index 0000000000..0b05ea9080
 +    int64_t length;
 +
 +    char *repository;
++    char *namespace;
 +    char *snapshot;
 +    char *archive;
 +} BDRVPBSState;
@@ -81,6 +89,11 @@ index 0000000000..0b05ea9080
 +            .help = "The server address and repository to connect to.",
 +        },
 +        {
++            .name = PBS_OPT_NAMESPACE,
++            .type = QEMU_OPT_STRING,
++            .help = "Optional: The snapshot's namespace.",
++        },
++        {
 +            .name = PBS_OPT_SNAPSHOT,
 +            .type = QEMU_OPT_STRING,
 +            .help = "The snapshot to read.",
@@ -116,7 +129,7 @@ index 0000000000..0b05ea9080
 +
 +
 +// filename format:
-+// pbs:repository=<repo>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
++// pbs:repository=<repo>,namespace=<ns>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
 +static void pbs_parse_filename(const char *filename, QDict *options,
 +                                     Error **errp)
 +{
@@ -152,6 +165,7 @@ index 0000000000..0b05ea9080
 +    s->archive = g_strdup(qemu_opt_get(opts, PBS_OPT_ARCHIVE));
 +    const char *keyfile = qemu_opt_get(opts, PBS_OPT_KEYFILE);
 +    const char *password = qemu_opt_get(opts, PBS_OPT_PASSWORD);
++    const char *namespace = qemu_opt_get(opts, PBS_OPT_NAMESPACE);
 +    const char *fingerprint = qemu_opt_get(opts, PBS_OPT_FINGERPRINT);
 +    const char *key_password = qemu_opt_get(opts, PBS_OPT_ENCRYPTION_PASSWORD);
 +
@@ -164,9 +178,12 @@ index 0000000000..0b05ea9080
 +    if (!key_password) {
 +        key_password = getenv("PBS_ENCRYPTION_PASSWORD");
 +    }
++    if (namespace) {
++        s->namespace = g_strdup(namespace);
++    }
 +
 +    /* connect to PBS server in read mode */
-+    s->conn = proxmox_restore_new(s->repository, s->snapshot, password,
++    s->conn = proxmox_restore_new_ns(s->repository, s->snapshot, s->namespace, password,
 +        keyfile, key_password, fingerprint, &pbs_error);
 +
 +    /* invalidates qemu_opt_get char pointers from above */
@@ -211,12 +228,13 @@ index 0000000000..0b05ea9080
 +static void pbs_close(BlockDriverState *bs) {
 +    BDRVPBSState *s = bs->opaque;
 +    g_free(s->repository);
++    g_free(s->namespace);
 +    g_free(s->snapshot);
 +    g_free(s->archive);
 +    proxmox_restore_disconnect(s->conn);
 +}
 +
-+static int64_t pbs_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t pbs_co_getlength(BlockDriverState *bs)
 +{
 +    BDRVPBSState *s = bs->opaque;
 +    return s->length;
@@ -240,11 +258,20 @@ index 0000000000..0b05ea9080
 +    BDRVPBSState *s = bs->opaque;
 +    int ret;
 +    char *pbs_error = NULL;
-+    uint8_t *buf = malloc(bytes);
++    uint8_t *buf;
++    bool inline_buf = true;
++
++    /* for single-buffer IO vectors we can fast-path the write directly to it */
++    if (qiov->niov == 1 && qiov->iov->iov_len >= bytes) {
++        buf = qiov->iov->iov_base;
++    } else {
++        inline_buf = false;
++        buf = g_malloc(bytes);
++    }
 +
 +    if (offset < 0 || bytes < 0) {
 +        fprintf(stderr, "unexpected negative 'offset' or 'bytes' value!\n");
-+        return -EINVAL;
++        return -EIO;
 +    }
 +
 +    ReadCallbackData rcb = {
@@ -263,10 +290,12 @@ index 0000000000..0b05ea9080
 +        return -EIO;
 +    }
 +
-+    qemu_iovec_from_buf(qiov, 0, buf, bytes);
-+    free(buf);
++    if (!inline_buf) {
++        qemu_iovec_from_buf(qiov, 0, buf, bytes);
++        g_free(buf);
++    }
 +
-+    return ret;
++    return 0;
 +}
 +
 +static coroutine_fn int pbs_co_pwritev(BlockDriverState *bs,
@@ -281,8 +310,13 @@ index 0000000000..0b05ea9080
 +static void pbs_refresh_filename(BlockDriverState *bs)
 +{
 +    BDRVPBSState *s = bs->opaque;
-+    snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
-+             s->repository, s->snapshot, s->archive);
++    if (s->namespace) {
++        snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s:%s(%s)",
++                 s->repository, s->namespace, s->snapshot, s->archive);
++    } else {
++        snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
++                 s->repository, s->snapshot, s->archive);
++    }
 +}
 +
 +static const char *const pbs_strong_runtime_opts[] = {
@@ -299,7 +333,7 @@ index 0000000000..0b05ea9080
 +    .bdrv_file_open         = pbs_file_open,
 +    .bdrv_open              = pbs_open,
 +    .bdrv_close             = pbs_close,
-+    .bdrv_getlength         = pbs_getlength,
++    .bdrv_co_getlength      = pbs_co_getlength,
 +
 +    .bdrv_co_preadv         = pbs_co_preadv,
 +    .bdrv_co_pwritev        = pbs_co_pwritev,
@@ -315,71 +349,72 @@ index 0000000000..0b05ea9080
 +
 +block_init(bdrv_pbs_init);
 diff --git a/configure b/configure
-index 48c21775f3..eda4e9225a 100755
+index a62a3e6be9..1ac0feb46b 100755
 --- a/configure
 +++ b/configure
-@@ -356,6 +356,7 @@ vdi=${default_feature:-yes}
- vvfat=${default_feature:-yes}
- qed=${default_feature:-yes}
- parallels=${default_feature:-yes}
+@@ -288,6 +288,7 @@ linux_user=""
+ bsd_user=""
+ pie=""
+ coroutine=""
 +pbs_bdrv="yes"
- debug_mutex="no"
  plugins="$default_feature"
- rng_none="no"
-@@ -1126,6 +1127,10 @@ for opt do
+ meson=""
+ ninja=""
+@@ -873,6 +874,10 @@ for opt do
    ;;
-   --enable-parallels) parallels="yes"
+   --with-coroutine=*) coroutine="$optarg"
    ;;
 +  --disable-pbs-bdrv) pbs_bdrv="no"
 +  ;;
 +  --enable-pbs-bdrv) pbs_bdrv="yes"
 +  ;;
-   --disable-vhost-user) vhost_user="no"
+   --with-git=*) git="$optarg"
    ;;
-   --enable-vhost-user) vhost_user="yes"
-@@ -1465,6 +1470,7 @@ cat << EOF
-   vvfat           vvfat image format support
-   qed             qed image format support
-   parallels       parallels image format support
+   --with-git-submodules=*)
+@@ -1049,6 +1054,7 @@ cat << EOF
+   debug-info      debugging information
+   safe-stack      SafeStack Stack Smash Protection. Depends on
+                   clang/llvm and requires coroutine backend ucontext.
 +  pbs-bdrv        Proxmox backup server read-only block driver support
-   crypto-afalg    Linux AF_ALG crypto backend driver
-   debug-mutex     mutex debugging support
-   rng-none        dummy RNG, avoid using /dev/(u)random and getrandom()
-@@ -3534,6 +3540,9 @@ if test "$xen" = "enabled" ; then
-   echo "XEN_CFLAGS=$xen_cflags" >> $config_host_mak
-   echo "XEN_LIBS=$xen_libs" >> $config_host_mak
+ 
+ NOTE: The object files are built at the place where configure is launched
+ EOF
+@@ -2386,6 +2392,9 @@ echo "TARGET_DIRS=$target_list" >> $config_host_mak
+ if test "$modules" = "yes"; then
+   echo "CONFIG_MODULES=y" >> $config_host_mak
  fi
 +if test "$pbs_bdrv" = "yes" ; then
 +  echo "CONFIG_PBS_BDRV=y" >> $config_host_mak
 +fi
- if test "$vhost_scsi" = "yes" ; then
-   echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
- fi
+ 
+ # XXX: suppress that
+ if [ "$bsd" = "yes" ] ; then
 diff --git a/meson.build b/meson.build
-index 1a4dfab4e2..85b3c63199 100644
+index 32ab849ce6..69afe3441b 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -3448,6 +3448,7 @@ summary_info += {'lzfse support':     liblzfse}
+@@ -4041,7 +4041,7 @@ summary_info += {'bzip2 support':     libbzip2}
+ summary_info += {'lzfse support':     liblzfse}
  summary_info += {'zstd support':      zstd}
- summary_info += {'NUMA host support': config_host.has_key('CONFIG_NUMA')}
- summary_info += {'libxml2':           libxml2}
+ summary_info += {'NUMA host support': numa}
+-summary_info += {'capstone':          capstone}
 +summary_info += {'PBS bdrv support':  config_host.has_key('CONFIG_PBS_BDRV')}
- summary_info += {'capstone':          capstone_opt == 'internal' ? capstone_opt : capstone}
  summary_info += {'libpmem support':   libpmem}
  summary_info += {'libdaxctl support': libdaxctl}
+ summary_info += {'libudev':           libudev}
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 5d8e2eb303..777863e33b 100644
+index 4ec70acf95..47118bf83e 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -3053,6 +3053,7 @@
-             'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
-             'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+@@ -3301,6 +3301,7 @@
+             'parallels', 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum',
+             'raw', 'rbd',
              { 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
 +            'pbs',
-             'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
- 
- ##
-@@ -3125,6 +3126,17 @@
+             'ssh', 'throttle', 'vdi', 'vhdx',
+             { 'name': 'virtio-blk-vfio-pci', 'if': 'CONFIG_BLKIO' },
+             { 'name': 'virtio-blk-vhost-user', 'if': 'CONFIG_BLKIO' },
+@@ -3377,6 +3378,17 @@
  { 'struct': 'BlockdevOptionsNull',
    'data': { '*size': 'int', '*latency-ns': 'uint64', '*read-zeroes': 'bool' } }
  
@@ -392,16 +427,28 @@ index 5d8e2eb303..777863e33b 100644
 +{ 'struct': 'BlockdevOptionsPbs',
 +  'data': { 'repository': 'str', 'snapshot': 'str', 'archive': 'str',
 +            '*keyfile': 'str', '*password': 'str', '*fingerprint': 'str',
-+            '*key_password': 'str' } }
++            '*key_password': 'str', '*namespace': 'str' } }
 +
  ##
  # @BlockdevOptionsNVMe:
  #
-@@ -4367,6 +4379,7 @@
+@@ -4750,6 +4762,7 @@
        'nfs':        'BlockdevOptionsNfs',
        'null-aio':   'BlockdevOptionsNull',
        'null-co':    'BlockdevOptionsNull',
 +      'pbs':        'BlockdevOptionsPbs',
        'nvme':       'BlockdevOptionsNVMe',
-       'parallels':  'BlockdevOptionsGenericFormat',
-       'preallocate':'BlockdevOptionsPreallocate',
+       'nvme-io_uring': { 'type': 'BlockdevOptionsNvmeIoUring',
+                          'if': 'CONFIG_BLKIO' },
+diff --git a/qapi/pragma.json b/qapi/pragma.json
+index 325e684411..b6079f6a0e 100644
+--- a/qapi/pragma.json
++++ b/qapi/pragma.json
+@@ -45,6 +45,7 @@
+         'BlockInfo',                # query-block
+         'BlockdevAioOptions',       # blockdev-add, -blockdev
+         'BlockdevDriver',           # blockdev-add, query-blockstats, ...
++        'BlockdevOptionsPbs',       # for PBS backwards compat
+         'BlockdevVmdkAdapterType',  # blockdev-create (to match VMDK spec)
+         'BlockdevVmdkSubformat',    # blockdev-create (to match VMDK spec)
+         'ColoCompareProperties',    # object_add, -object

debian/patches/pve/0033-PVE-add-query_proxmox_support-QMP-command.patch

@@ -1,74 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 8 Jul 2020 11:57:53 +0200
-Subject: [PATCH] PVE: add query_proxmox_support QMP command
-
-Generic interface for future use, currently used for PBS dirty-bitmap
-backup support.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[PVE: query-proxmox-support: include library version]
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- pve-backup.c         |  9 +++++++++
- qapi/block-core.json | 29 +++++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
-diff --git a/pve-backup.c b/pve-backup.c
-index c15abefdda..4684789813 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -1075,3 +1075,12 @@ BackupStatus *qmp_query_backup(Error **errp)
- 
-     return info;
- }
-+
-+ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
-+{
-+    ProxmoxSupportStatus *ret = g_malloc0(sizeof(*ret));
-+    ret->pbs_library_version = g_strdup(proxmox_backup_qemu_version());
-+    ret->pbs_dirty_bitmap = true;
-+    ret->pbs_dirty_bitmap_savevm = true;
-+    return ret;
-+}
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 777863e33b..cfd980b70f 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -867,6 +867,35 @@
- ##
- { 'command': 'backup-cancel' }
- 
-+##
-+# @ProxmoxSupportStatus:
-+#
-+# Contains info about supported features added by Proxmox.
-+#
-+# @pbs-dirty-bitmap: True if dirty-bitmap-incremental backups to PBS are
-+#                    supported.
-+#
-+# @pbs-dirty-bitmap-savevm: True if 'dirty-bitmaps' migration capability can
-+#                           safely be set for savevm-async.
-+#
-+# @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
-+#
-+##
-+{ 'struct': 'ProxmoxSupportStatus',
-+  'data': { 'pbs-dirty-bitmap': 'bool',
-+            'pbs-dirty-bitmap-savevm': 'bool',
-+            'pbs-library-version': 'str' } }
-+
-+##
-+# @query-proxmox-support:
-+#
-+# Returns information about supported features added by Proxmox.
-+#
-+# Returns: @ProxmoxSupportStatus
-+#
-+##
-+{ 'command': 'query-proxmox-support', 'returns': 'ProxmoxSupportStatus' }
-+
- ##
- # @BlockDeviceTimedStats:
- #

debian/patches/pve/0033-PVE-redirect-stderr-to-journal-when-daemonized.patch

@@ -14,10 +14,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  2 files changed, 7 insertions(+), 2 deletions(-)
 
 diff --git a/meson.build b/meson.build
-index 85b3c63199..31ba7d70d6 100644
+index 69afe3441b..b2e9b2aec7 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -1203,6 +1203,7 @@ keyutils = dependency('libkeyutils', required: false,
+@@ -1528,6 +1528,7 @@ keyutils = dependency('libkeyutils', required: false,
  has_gettid = cc.has_function('gettid')
  
  libuuid = cc.find_library('uuid', required: true)
@@ -25,7 +25,7 @@ index 85b3c63199..31ba7d70d6 100644
  libproxmox_backup_qemu = cc.find_library('proxmox_backup_qemu', required: true)
  
  # libselinux
-@@ -2571,6 +2572,7 @@ if have_block
+@@ -3144,6 +3145,7 @@ if have_block
    # os-posix.c contains POSIX-specific functions used by qemu-storage-daemon,
    # os-win32.c does not
    blockdev_ss.add(when: 'CONFIG_POSIX', if_true: files('os-posix.c'))
@@ -34,7 +34,7 @@ index 85b3c63199..31ba7d70d6 100644
  endif
  
 diff --git a/os-posix.c b/os-posix.c
-index ae6c9f2a5e..36807806bf 100644
+index 90ea71725f..33745a8c22 100644
 --- a/os-posix.c
 +++ b/os-posix.c
 @@ -28,6 +28,8 @@
@@ -44,15 +44,15 @@ index ae6c9f2a5e..36807806bf 100644
 +#include <systemd/sd-journal.h>
 +#include <syslog.h>
  
- #include "qemu-common.h"
  /* Needed early for CONFIG_BSD etc. */
-@@ -291,9 +293,10 @@ void os_setup_post(void)
+ #include "net/slirp.h"
+@@ -301,9 +303,10 @@ void os_setup_post(void)
  
          dup2(fd, 0);
          dup2(fd, 1);
 -        /* In case -D is given do not redirect stderr to /dev/null */
 +        /* In case -D is given do not redirect stderr to journal */
-         if (!qemu_logfile) {
+         if (!qemu_log_enabled()) {
 -            dup2(fd, 2);
 +            int journal_fd = sd_journal_stream_fd("QEMU", LOG_ERR, 0);
 +            dup2(journal_fd, 2);

debian/patches/pve/0034-PVE-Migrate-dirty-bitmap-state-via-savevm.patch

@@ -13,21 +13,23 @@ safe migration is possible and makes sense.
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: split up state_pending for 8.0]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  include/migration/misc.h |   3 ++
  migration/meson.build    |   2 +
  migration/migration.c    |   1 +
- migration/pbs-state.c    | 106 +++++++++++++++++++++++++++++++++++++++
+ migration/pbs-state.c    | 104 +++++++++++++++++++++++++++++++++++++++
  pve-backup.c             |   1 +
  qapi/block-core.json     |   6 +++
- 6 files changed, 119 insertions(+)
+ 6 files changed, 117 insertions(+)
  create mode 100644 migration/pbs-state.c
 
 diff --git a/include/migration/misc.h b/include/migration/misc.h
-index 465906710d..4f0aeceb6f 100644
+index 8b49841016..78f63ca400 100644
 --- a/include/migration/misc.h
 +++ b/include/migration/misc.h
-@@ -75,4 +75,7 @@ bool migration_in_bg_snapshot(void);
+@@ -77,4 +77,7 @@ bool migration_in_bg_snapshot(void);
  /* migration/block-dirty-bitmap.c */
  void dirty_bitmap_mig_init(void);
  
@@ -36,11 +38,11 @@ index 465906710d..4f0aeceb6f 100644
 +
  #endif
 diff --git a/migration/meson.build b/migration/meson.build
-index ea9aedeefc..c27dc9bd97 100644
+index a7824b5266..de6a271b58 100644
 --- a/migration/meson.build
 +++ b/migration/meson.build
-@@ -7,8 +7,10 @@ migration_files = files(
-   'qemu-file-channel.c',
+@@ -6,8 +6,10 @@ migration_files = files(
+   'vmstate.c',
    'qemu-file.c',
    'yank_functions.c',
 +  'pbs-state.c',
@@ -51,10 +53,10 @@ index ea9aedeefc..c27dc9bd97 100644
  softmmu_ss.add(files(
    'block-dirty-bitmap.c',
 diff --git a/migration/migration.c b/migration/migration.c
-index abaf6f9e3d..d925fd7488 100644
+index 99f86bd6c2..db229e72c9 100644
 --- a/migration/migration.c
 +++ b/migration/migration.c
-@@ -213,6 +213,7 @@ void migration_object_init(void)
+@@ -245,6 +245,7 @@ void migration_object_init(void)
      blk_mig_init();
      ram_mig_init();
      dirty_bitmap_mig_init();
@@ -64,10 +66,10 @@ index abaf6f9e3d..d925fd7488 100644
  void migration_cancel(const Error *error)
 diff --git a/migration/pbs-state.c b/migration/pbs-state.c
 new file mode 100644
-index 0000000000..29f2b3860d
+index 0000000000..887e998b9e
 --- /dev/null
 +++ b/migration/pbs-state.c
-@@ -0,0 +1,106 @@
+@@ -0,0 +1,104 @@
 +/*
 + * PBS (dirty-bitmap) state migration
 + */
@@ -86,11 +88,8 @@ index 0000000000..29f2b3860d
 +/* state is accessed via this static variable directly, 'opaque' is NULL */
 +static PBSState pbs_state;
 +
-+static void pbs_state_save_pending(QEMUFile *f, void *opaque,
-+                                      uint64_t max_size,
-+                                      uint64_t *res_precopy_only,
-+                                      uint64_t *res_compatible,
-+                                      uint64_t *res_postcopy_only)
++static void pbs_state_pending(void *opaque, uint64_t *must_precopy,
++                              uint64_t *can_postcopy)
 +{
 +    /* we send everything in save_setup, so nothing is ever pending */
 +}
@@ -160,7 +159,8 @@ index 0000000000..29f2b3860d
 +static SaveVMHandlers savevm_pbs_state_handlers = {
 +    .save_setup = pbs_state_save_setup,
 +    .has_postcopy = pbs_state_has_postcopy,
-+    .save_live_pending = pbs_state_save_pending,
++    .state_pending_exact = pbs_state_pending,
++    .state_pending_estimate = pbs_state_pending,
 +    .is_active_iterate = pbs_state_is_active_iterate,
 +    .load_state = pbs_state_load,
 +    .is_active = pbs_state_is_active,
@@ -175,22 +175,22 @@ index 0000000000..29f2b3860d
 +                         NULL);
 +}
 diff --git a/pve-backup.c b/pve-backup.c
-index 6f05796fad..5fa3cc1352 100644
+index dd72ee0ed6..cb5312fff3 100644
 --- a/pve-backup.c
 +++ b/pve-backup.c
-@@ -1132,6 +1132,7 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
+@@ -1090,6 +1090,7 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
      ret->pbs_library_version = g_strdup(proxmox_backup_qemu_version());
      ret->pbs_dirty_bitmap = true;
      ret->pbs_dirty_bitmap_savevm = true;
 +    ret->pbs_dirty_bitmap_migration = true;
      ret->query_bitmap_info = true;
-     return ret;
- }
+     ret->pbs_masterkey = true;
+     ret->backup_max_workers = true;
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 6a67adf923..c99ddf8628 100644
+index 47118bf83e..809f3c61bc 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -883,6 +883,11 @@
+@@ -984,6 +984,11 @@
  # @pbs-dirty-bitmap-savevm: True if 'dirty-bitmaps' migration capability can
  #                           safely be set for savevm-async.
  #
@@ -199,14 +199,14 @@ index 6a67adf923..c99ddf8628 100644
 +#                              migration cap if this is false/unset may lead
 +#                              to crashes on migration!
 +#
- # @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
+ # @pbs-masterkey: True if the QMP backup call supports the 'master_keyfile'
+ #                 parameter.
  #
- ##
-@@ -890,6 +895,7 @@
+@@ -994,6 +999,7 @@
    'data': { 'pbs-dirty-bitmap': 'bool',
              'query-bitmap-info': 'bool',
              'pbs-dirty-bitmap-savevm': 'bool',
 +            'pbs-dirty-bitmap-migration': 'bool',
-             'pbs-library-version': 'str' } }
- 
- ##
+             'pbs-masterkey': 'bool',
+             'pbs-library-version': 'str',
+             'backup-max-workers': 'bool' } }

debian/patches/pve/0034-PVE-add-query-pbs-bitmap-info-QMP-call.patch

@@ -1,441 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 19 Aug 2020 17:02:00 +0200
-Subject: [PATCH] PVE: add query-pbs-bitmap-info QMP call
-
-Returns advanced information about dirty bitmaps used (or not used) for
-the latest PBS backup.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- monitor/hmp-cmds.c   |  28 ++++++-----
- pve-backup.c         | 117 ++++++++++++++++++++++++++++++++-----------
- qapi/block-core.json |  56 +++++++++++++++++++++
- 3 files changed, 159 insertions(+), 42 deletions(-)
-
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index cfd7a60f32..b613190a3c 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -198,6 +198,7 @@ void hmp_info_mice(Monitor *mon, const QDict *qdict)
- void hmp_info_backup(Monitor *mon, const QDict *qdict)
- {
-     BackupStatus *info;
-+    PBSBitmapInfoList *bitmap_info;
- 
-     info = qmp_query_backup(NULL);
- 
-@@ -228,26 +229,29 @@ void hmp_info_backup(Monitor *mon, const QDict *qdict)
-             // this should not happen normally
-             monitor_printf(mon, "Total size: %d\n", 0);
-         } else {
--            bool incremental = false;
-             size_t total_or_dirty = info->total;
--            if (info->has_transferred) {
--                if (info->has_dirty && info->dirty) {
--                     if (info->dirty < info->total) {
--                        total_or_dirty = info->dirty;
--                        incremental = true;
--                    }
--                }
-+            bitmap_info = qmp_query_pbs_bitmap_info(NULL);
-+
-+            while (bitmap_info) {
-+                monitor_printf(mon, "Drive %s:\n",
-+                        bitmap_info->value->drive);
-+                monitor_printf(mon, "  bitmap action: %s\n",
-+                        PBSBitmapAction_str(bitmap_info->value->action));
-+                monitor_printf(mon, "  size: %zd\n",
-+                        bitmap_info->value->size);
-+                monitor_printf(mon, "  dirty: %zd\n",
-+                        bitmap_info->value->dirty);
-+                bitmap_info = bitmap_info->next;
-             }
- 
--            int per = (info->transferred * 100)/total_or_dirty;
--
--            monitor_printf(mon, "Backup mode: %s\n", incremental ? "incremental" : "full");
-+            qapi_free_PBSBitmapInfoList(bitmap_info);
- 
-             int zero_per = (info->has_zero_bytes && info->zero_bytes) ?
-                 (info->zero_bytes * 100)/info->total : 0;
-             monitor_printf(mon, "Total size: %zd\n", info->total);
-+            int trans_per = (info->transferred * 100)/total_or_dirty;
-             monitor_printf(mon, "Transferred bytes: %zd (%d%%)\n",
--                           info->transferred, per);
-+                           info->transferred, trans_per);
-             monitor_printf(mon, "Zero bytes: %zd (%d%%)\n",
-                            info->zero_bytes, zero_per);
- 
-diff --git a/pve-backup.c b/pve-backup.c
-index 4684789813..f90abaa50a 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -46,6 +46,7 @@ static struct PVEBackupState {
-         size_t transferred;
-         size_t reused;
-         size_t zero_bytes;
-+        GList *bitmap_list;
-     } stat;
-     int64_t speed;
-     VmaWriter *vmaw;
-@@ -672,7 +673,6 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     }
- 
-     size_t total = 0;
--    size_t dirty = 0;
- 
-     l = di_list;
-     while (l) {
-@@ -693,18 +693,33 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
- 
-     uuid_generate(uuid);
- 
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+    backup_state.stat.reused = 0;
-+
-+    /* clear previous backup's bitmap_list */
-+    if (backup_state.stat.bitmap_list) {
-+        GList *bl = backup_state.stat.bitmap_list;
-+        while (bl) {
-+            g_free(((PBSBitmapInfo *)bl->data)->drive);
-+            g_free(bl->data);
-+            bl = g_list_next(bl);
-+        }
-+        g_list_free(backup_state.stat.bitmap_list);
-+        backup_state.stat.bitmap_list = NULL;
-+    }
-+
-     if (format == BACKUP_FORMAT_PBS) {
-         if (!task->has_password) {
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'password'");
--            goto err;
-+            goto err_mutex;
-         }
-         if (!task->has_backup_id) {
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-id'");
--            goto err;
-+            goto err_mutex;
-         }
-         if (!task->has_backup_time) {
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-time'");
--            goto err;
-+            goto err_mutex;
-         }
- 
-         int dump_cb_block_size = PROXMOX_BACKUP_DEFAULT_CHUNK_SIZE; // Hardcoded (4M)
-@@ -731,12 +746,12 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-                       "proxmox_backup_new failed: %s", pbs_err);
-             proxmox_backup_free_error(pbs_err);
--            goto err;
-+            goto err_mutex;
-         }
- 
-         int connect_result = proxmox_backup_co_connect(pbs, task->errp);
-         if (connect_result < 0)
--            goto err;
-+            goto err_mutex;
- 
-         /* register all devices */
-         l = di_list;
-@@ -747,6 +762,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             di->block_size = dump_cb_block_size;
- 
-             const char *devname = bdrv_get_device_name(di->bs);
-+            PBSBitmapAction action = PBS_BITMAP_ACTION_NOT_USED;
-+            size_t dirty = di->size;
- 
-             BdrvDirtyBitmap *bitmap = bdrv_find_dirty_bitmap(di->bs, PBS_BITMAP_NAME);
-             bool expect_only_dirty = false;
-@@ -755,49 +772,59 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-                 if (bitmap == NULL) {
-                     bitmap = bdrv_create_dirty_bitmap(di->bs, dump_cb_block_size, PBS_BITMAP_NAME, task->errp);
-                     if (!bitmap) {
--                        goto err;
-+                        goto err_mutex;
-                     }
-+                    action = PBS_BITMAP_ACTION_NEW;
-                 } else {
-                     expect_only_dirty = proxmox_backup_check_incremental(pbs, devname, di->size) != 0;
-                 }
- 
-                 if (expect_only_dirty) {
--                    dirty += bdrv_get_dirty_count(bitmap);
-+                    /* track clean chunks as reused */
-+                    dirty = MIN(bdrv_get_dirty_count(bitmap), di->size);
-+                    backup_state.stat.reused += di->size - dirty;
-+                    action = PBS_BITMAP_ACTION_USED;
-                 } else {
-                     /* mark entire bitmap as dirty to make full backup */
-                     bdrv_set_dirty_bitmap(bitmap, 0, di->size);
--                    dirty += di->size;
-+                    if (action != PBS_BITMAP_ACTION_NEW) {
-+                        action = PBS_BITMAP_ACTION_INVALID;
-+                    }
-                 }
-                 di->bitmap = bitmap;
-             } else {
--                dirty += di->size;
--
-                 /* after a full backup the old dirty bitmap is invalid anyway */
-                 if (bitmap != NULL) {
-                     bdrv_release_dirty_bitmap(bitmap);
-+                    action = PBS_BITMAP_ACTION_NOT_USED_REMOVED;
-                 }
-             }
- 
-             int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, task->errp);
-             if (dev_id < 0) {
--                goto err;
-+                goto err_mutex;
-             }
- 
-             if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, task->errp))) {
--                goto err;
-+                goto err_mutex;
-             }
- 
-             di->dev_id = dev_id;
-+
-+            PBSBitmapInfo *info = g_malloc(sizeof(*info));
-+            info->drive = g_strdup(devname);
-+            info->action = action;
-+            info->size = di->size;
-+            info->dirty = dirty;
-+            backup_state.stat.bitmap_list = g_list_append(backup_state.stat.bitmap_list, info);
-         }
-     } else if (format == BACKUP_FORMAT_VMA) {
--        dirty = total;
--
-         vmaw = vma_writer_create(task->backup_file, uuid, &local_err);
-         if (!vmaw) {
-             if (local_err) {
-                 error_propagate(task->errp, local_err);
-             }
--            goto err;
-+            goto err_mutex;
-         }
- 
-         /* register all devices for vma writer */
-@@ -807,7 +834,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             l = g_list_next(l);
- 
-             if (!(di->target = bdrv_backup_dump_create(VMA_CLUSTER_SIZE, di->size, pvebackup_co_dump_vma_cb, di, task->errp))) {
--                goto err;
-+                goto err_mutex;
-             }
- 
-             const char *devname = bdrv_get_device_name(di->bs);
-@@ -815,16 +842,14 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             if (di->dev_id <= 0) {
-                 error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-                           "register_stream failed");
--                goto err;
-+                goto err_mutex;
-             }
-         }
-     } else if (format == BACKUP_FORMAT_DIR) {
--        dirty = total;
--
-         if (mkdir(task->backup_file, 0640) != 0) {
-             error_setg_errno(task->errp, errno, "can't create directory '%s'\n",
-                              task->backup_file);
--            goto err;
-+            goto err_mutex;
-         }
-         backup_dir = task->backup_file;
- 
-@@ -841,18 +866,18 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-                             di->size, flags, false, &local_err);
-             if (local_err) {
-                 error_propagate(task->errp, local_err);
--                goto err;
-+                goto err_mutex;
-             }
- 
-             di->target = bdrv_open(di->targetfile, NULL, NULL, flags, &local_err);
-             if (!di->target) {
-                 error_propagate(task->errp, local_err);
--                goto err;
-+                goto err_mutex;
-             }
-         }
-     } else {
-         error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "unknown backup format");
--        goto err;
-+        goto err_mutex;
-     }
- 
- 
-@@ -860,7 +885,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     if (task->has_config_file) {
-         if (pvebackup_co_add_config(task->config_file, config_name, format, backup_dir,
-                                     vmaw, pbs, task->errp) != 0) {
--            goto err;
-+            goto err_mutex;
-         }
-     }
- 
-@@ -868,12 +893,11 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     if (task->has_firewall_file) {
-         if (pvebackup_co_add_config(task->firewall_file, firewall_name, format, backup_dir,
-                                     vmaw, pbs, task->errp) != 0) {
--            goto err;
-+            goto err_mutex;
-         }
-     }
-     /* initialize global backup_state now */
--
--    qemu_mutex_lock(&backup_state.stat.lock);
-+    /* note: 'reused' and 'bitmap_list' are initialized earlier */
- 
-     if (backup_state.stat.error) {
-         error_free(backup_state.stat.error);
-@@ -893,10 +917,9 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     char *uuid_str = g_strdup(backup_state.stat.uuid_str);
- 
-     backup_state.stat.total = total;
--    backup_state.stat.dirty = dirty;
-+    backup_state.stat.dirty = total - backup_state.stat.reused;
-     backup_state.stat.transferred = 0;
-     backup_state.stat.zero_bytes = 0;
--    backup_state.stat.reused = format == BACKUP_FORMAT_PBS && dirty >= total ? 0 : total - dirty;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-@@ -913,6 +936,9 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     task->result = uuid_info;
-     return;
- 
-+err_mutex:
-+    qemu_mutex_unlock(&backup_state.stat.lock);
-+
- err:
- 
-     l = di_list;
-@@ -1076,11 +1102,42 @@ BackupStatus *qmp_query_backup(Error **errp)
-     return info;
- }
- 
-+PBSBitmapInfoList *qmp_query_pbs_bitmap_info(Error **errp)
-+{
-+    PBSBitmapInfoList *head = NULL, **p_next = &head;
-+
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+
-+    GList *l = backup_state.stat.bitmap_list;
-+    while (l) {
-+        PBSBitmapInfo *info = (PBSBitmapInfo *)l->data;
-+        l = g_list_next(l);
-+
-+        /* clone bitmap info to avoid auto free after QMP marshalling */
-+        PBSBitmapInfo *info_ret = g_malloc0(sizeof(*info_ret));
-+        info_ret->drive = g_strdup(info->drive);
-+        info_ret->action = info->action;
-+        info_ret->size = info->size;
-+        info_ret->dirty = info->dirty;
-+
-+        PBSBitmapInfoList *info_list = g_malloc0(sizeof(*info_list));
-+        info_list->value = info_ret;
-+
-+        *p_next = info_list;
-+        p_next = &info_list->next;
-+    }
-+
-+    qemu_mutex_unlock(&backup_state.stat.lock);
-+
-+    return head;
-+}
-+
- ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
- {
-     ProxmoxSupportStatus *ret = g_malloc0(sizeof(*ret));
-     ret->pbs_library_version = g_strdup(proxmox_backup_qemu_version());
-     ret->pbs_dirty_bitmap = true;
-     ret->pbs_dirty_bitmap_savevm = true;
-+    ret->query_bitmap_info = true;
-     return ret;
- }
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index cfd980b70f..8833060385 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -875,6 +875,8 @@
- # @pbs-dirty-bitmap: True if dirty-bitmap-incremental backups to PBS are
- #                    supported.
- #
-+# @query-bitmap-info: True if the 'query-pbs-bitmap-info' QMP call is supported.
-+#
- # @pbs-dirty-bitmap-savevm: True if 'dirty-bitmaps' migration capability can
- #                           safely be set for savevm-async.
- #
-@@ -883,6 +885,7 @@
- ##
- { 'struct': 'ProxmoxSupportStatus',
-   'data': { 'pbs-dirty-bitmap': 'bool',
-+            'query-bitmap-info': 'bool',
-             'pbs-dirty-bitmap-savevm': 'bool',
-             'pbs-library-version': 'str' } }
- 
-@@ -896,6 +899,59 @@
- ##
- { 'command': 'query-proxmox-support', 'returns': 'ProxmoxSupportStatus' }
- 
-+##
-+# @PBSBitmapAction:
-+#
-+# An action taken on a dirty-bitmap when a backup job was started.
-+#
-+# @not-used: Bitmap mode was not enabled.
-+#
-+# @not-used-removed: Bitmap mode was not enabled, but a bitmap from a
-+#                    previous backup still existed and was removed.
-+#
-+# @new: A new bitmap was attached to the drive for this backup.
-+#
-+# @used: An existing bitmap will be used to only backup changed data.
-+#
-+# @invalid: A bitmap existed, but had to be cleared since it's associated
-+#           base snapshot did not match the base given for the current job or
-+#           the crypt mode has changed.
-+#
-+##
-+{ 'enum': 'PBSBitmapAction',
-+  'data': ['not-used', 'not-used-removed', 'new', 'used', 'invalid'] }
-+
-+##
-+# @PBSBitmapInfo:
-+#
-+# Contains information about dirty bitmaps used for each drive in a PBS backup.
-+#
-+# @drive: The underlying drive.
-+#
-+# @action: The action that was taken when the backup started.
-+#
-+# @size: The total size of the drive.
-+#
-+# @dirty: How much of the drive is considered dirty and will be backed up,
-+#         or 'size' if everything will be.
-+#
-+##
-+{ 'struct': 'PBSBitmapInfo',
-+  'data': { 'drive': 'str', 'action': 'PBSBitmapAction', 'size': 'int',
-+            'dirty': 'int' } }
-+
-+##
-+# @query-pbs-bitmap-info:
-+#
-+# Returns information about dirty bitmaps used on the most recently started
-+# backup. Returns nothing when the last backup was not using PBS or if no
-+# backup occured in this session.
-+#
-+# Returns: @PBSBitmapInfo
-+#
-+##
-+{ 'command': 'query-pbs-bitmap-info', 'returns': ['PBSBitmapInfo'] }
-+
- ##
- # @BlockDeviceTimedStats:
- #

debian/patches/pve/0035-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch

@@ -19,10 +19,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/migration/block-dirty-bitmap.c b/migration/block-dirty-bitmap.c
-index 9aba7d9c22..f4ecf9c9f9 100644
+index fe73aa94b1..a6440929fa 100644
 --- a/migration/block-dirty-bitmap.c
 +++ b/migration/block-dirty-bitmap.c
-@@ -538,7 +538,7 @@ static int add_bitmaps_to_list(DBMSaveState *s, BlockDriverState *bs,
+@@ -539,7 +539,7 @@ static int add_bitmaps_to_list(DBMSaveState *s, BlockDriverState *bs,
  
          if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_DEFAULT, &local_err)) {
              error_report_err(local_err);

debian/patches/pve/0036-PVE-fall-back-to-open-iscsi-initiatorname.patch

@@ -21,10 +21,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 30 insertions(+)
 
 diff --git a/block/iscsi.c b/block/iscsi.c
-index 57aa07a40d..a8902b84d5 100644
+index 9fc0bed90b..1d40933165 100644
 --- a/block/iscsi.c
 +++ b/block/iscsi.c
-@@ -1386,12 +1386,42 @@ static char *get_initiator_name(QemuOpts *opts)
+@@ -1392,12 +1392,42 @@ static char *get_initiator_name(QemuOpts *opts)
      const char *name;
      char *iscsi_name;
      UuidInfo *uuid_info;

debian/patches/pve/0037-PVE-Backup-Use-a-transaction-to-synchronize-job-stat.patch

@@ -1,295 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Thu, 20 Aug 2020 14:25:00 +0200
-Subject: [PATCH] PVE-Backup: Use a transaction to synchronize job states
-
-By using a JobTxn, we can sync dirty bitmaps only when *all* jobs were
-successful - meaning we don't need to remove them when the backup fails,
-since QEMU's BITMAP_SYNC_MODE_ON_SUCCESS will now handle that for us.
-
-To keep the rate-limiting and IO impact from before, we use a sequential
-transaction, so drives will still be backed up one after the other.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[add new force parameter to job_cancel_sync calls]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
----
- pve-backup.c | 167 +++++++++++++++------------------------------------
- 1 file changed, 49 insertions(+), 118 deletions(-)
-
-diff --git a/pve-backup.c b/pve-backup.c
-index f90abaa50a..63c686463f 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -52,6 +52,7 @@ static struct PVEBackupState {
-     VmaWriter *vmaw;
-     ProxmoxBackupHandle *pbs;
-     GList *di_list;
-+    JobTxn *txn;
-     QemuMutex backup_mutex;
-     CoMutex dump_callback_mutex;
- } backup_state;
-@@ -71,32 +72,12 @@ typedef struct PVEBackupDevInfo {
-     size_t size;
-     uint64_t block_size;
-     uint8_t dev_id;
--    bool completed;
-     char targetfile[PATH_MAX];
-     BdrvDirtyBitmap *bitmap;
-     BlockDriverState *target;
-+    BlockJob *job;
- } PVEBackupDevInfo;
- 
--static void pvebackup_run_next_job(void);
--
--static BlockJob *
--lookup_active_block_job(PVEBackupDevInfo *di)
--{
--    if (!di->completed && di->bs) {
--        for (BlockJob *job = block_job_next(NULL); job; job = block_job_next(job)) {
--            if (job->job.driver->job_type != JOB_TYPE_BACKUP) {
--                continue;
--            }
--
--            BackupBlockJob *bjob = container_of(job, BackupBlockJob, common);
--            if (bjob && bjob->source_bs == di->bs) {
--                return job;
--            }
--        }
--    }
--    return NULL;
--}
--
- static void pvebackup_propagate_error(Error *err)
- {
-     qemu_mutex_lock(&backup_state.stat.lock);
-@@ -272,18 +253,6 @@ static void coroutine_fn pvebackup_co_cleanup(void *unused)
-             if (local_err != NULL) {
-                 pvebackup_propagate_error(local_err);
-             }
--        } else {
--            // on error or cancel we cannot ensure synchronization of dirty
--            // bitmaps with backup server, so remove all and do full backup next
--            GList *l = backup_state.di_list;
--            while (l) {
--                PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
--                l = g_list_next(l);
--
--                if (di->bitmap) {
--                    bdrv_release_dirty_bitmap(di->bitmap);
--                }
--            }
-         }
- 
-         proxmox_backup_disconnect(backup_state.pbs);
-@@ -322,8 +291,6 @@ static void pvebackup_complete_cb(void *opaque, int ret)
- 
-     qemu_mutex_lock(&backup_state.backup_mutex);
- 
--    di->completed = true;
--
-     if (ret < 0) {
-         Error *local_err = NULL;
-         error_setg(&local_err, "job failed with err %d - %s", ret, strerror(-ret));
-@@ -336,20 +303,17 @@ static void pvebackup_complete_cb(void *opaque, int ret)
- 
-     block_on_coroutine_fn(pvebackup_complete_stream, di);
- 
--    // remove self from job queue
-+    // remove self from job list
-     backup_state.di_list = g_list_remove(backup_state.di_list, di);
- 
--    if (di->bitmap && ret < 0) {
--        // on error or cancel we cannot ensure synchronization of dirty
--        // bitmaps with backup server, so remove all and do full backup next
--        bdrv_release_dirty_bitmap(di->bitmap);
--    }
--
-     g_free(di);
- 
--    qemu_mutex_unlock(&backup_state.backup_mutex);
-+    /* call cleanup if we're the last job */
-+    if (!g_list_first(backup_state.di_list)) {
-+        block_on_coroutine_fn(pvebackup_co_cleanup, NULL);
-+    }
- 
--    pvebackup_run_next_job();
-+    qemu_mutex_unlock(&backup_state.backup_mutex);
- }
- 
- static void pvebackup_cancel(void)
-@@ -371,36 +335,28 @@ static void pvebackup_cancel(void)
-         proxmox_backup_abort(backup_state.pbs, "backup canceled");
-     }
- 
--    qemu_mutex_unlock(&backup_state.backup_mutex);
--
--    for(;;) {
--
--        BlockJob *next_job = NULL;
--
--        qemu_mutex_lock(&backup_state.backup_mutex);
--
--        GList *l = backup_state.di_list;
--        while (l) {
--            PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
--            l = g_list_next(l);
-+    /* it's enough to cancel one job in the transaction, the rest will follow
-+     * automatically */
-+    GList *bdi = g_list_first(backup_state.di_list);
-+    BlockJob *cancel_job = bdi && bdi->data ?
-+        ((PVEBackupDevInfo *)bdi->data)->job :
-+        NULL;
- 
--            BlockJob *job = lookup_active_block_job(di);
--            if (job != NULL) {
--                next_job = job;
--                break;
--            }
--        }
-+    /* ref the job before releasing the mutex, just to be safe */
-+    if (cancel_job) {
-+        job_ref(&cancel_job->job);
-+    }
- 
--        qemu_mutex_unlock(&backup_state.backup_mutex);
-+    /* job_cancel_sync may enter the job, so we need to release the
-+     * backup_mutex to avoid deadlock */
-+    qemu_mutex_unlock(&backup_state.backup_mutex);
- 
--        if (next_job) {
--            AioContext *aio_context = next_job->job.aio_context;
--            aio_context_acquire(aio_context);
--            job_cancel_sync(&next_job->job, true);
--            aio_context_release(aio_context);
--        } else {
--            break;
--        }
-+    if (cancel_job) {
-+        AioContext *aio_context = cancel_job->job.aio_context;
-+        aio_context_acquire(aio_context);
-+        job_cancel_sync(&cancel_job->job, true);
-+        job_unref(&cancel_job->job);
-+        aio_context_release(aio_context);
-     }
- }
- 
-@@ -459,51 +415,19 @@ static int coroutine_fn pvebackup_co_add_config(
-     goto out;
- }
- 
--bool job_should_pause(Job *job);
--
--static void pvebackup_run_next_job(void)
--{
--    assert(!qemu_in_coroutine());
--
--    qemu_mutex_lock(&backup_state.backup_mutex);
--
--    GList *l = backup_state.di_list;
--    while (l) {
--        PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
--        l = g_list_next(l);
--
--        BlockJob *job = lookup_active_block_job(di);
--
--        if (job) {
--            qemu_mutex_unlock(&backup_state.backup_mutex);
--
--            AioContext *aio_context = job->job.aio_context;
--            aio_context_acquire(aio_context);
--
--            if (job_should_pause(&job->job)) {
--                bool error_or_canceled = pvebackup_error_or_canceled();
--                if (error_or_canceled) {
--                    job_cancel_sync(&job->job, true);
--                } else {
--                    job_resume(&job->job);
--                }
--            }
--            aio_context_release(aio_context);
--            return;
--        }
--    }
--
--    block_on_coroutine_fn(pvebackup_co_cleanup, NULL); // no more jobs, run cleanup
--
--    qemu_mutex_unlock(&backup_state.backup_mutex);
--}
--
- static bool create_backup_jobs(void) {
- 
-     assert(!qemu_in_coroutine());
- 
-     Error *local_err = NULL;
- 
-+    /* create job transaction to synchronize bitmap commit and cancel all
-+     * jobs in case one errors */
-+    if (backup_state.txn) {
-+        job_txn_unref(backup_state.txn);
-+    }
-+    backup_state.txn = job_txn_new_seq();
-+
-     BackupPerf perf = { .max_workers = 16 };
- 
-     /* create and start all jobs (paused state) */
-@@ -526,7 +450,7 @@ static bool create_backup_jobs(void) {
-         BlockJob *job = backup_job_create(
-             NULL, di->bs, di->target, backup_state.speed, sync_mode, di->bitmap,
-             bitmap_mode, false, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
--            JOB_DEFAULT, pvebackup_complete_cb, di, NULL, &local_err);
-+            JOB_DEFAULT, pvebackup_complete_cb, di, backup_state.txn, &local_err);
- 
-         aio_context_release(aio_context);
- 
-@@ -538,7 +462,8 @@ static bool create_backup_jobs(void) {
-             pvebackup_propagate_error(create_job_err);
-             break;
-         }
--        job_start(&job->job);
-+
-+        di->job = job;
- 
-         bdrv_unref(di->target);
-         di->target = NULL;
-@@ -556,6 +481,10 @@ static bool create_backup_jobs(void) {
-                 bdrv_unref(di->target);
-                 di->target = NULL;
-             }
-+
-+            if (di->job) {
-+                job_unref(&di->job->job);
-+            }
-         }
-     }
- 
-@@ -946,10 +875,6 @@ err:
-         PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-         l = g_list_next(l);
- 
--        if (di->bitmap) {
--            bdrv_release_dirty_bitmap(di->bitmap);
--        }
--
-         if (di->target) {
-             bdrv_unref(di->target);
-         }
-@@ -1038,9 +963,15 @@ UuidInfo *qmp_backup(
-     block_on_coroutine_fn(pvebackup_co_prepare, &task);
- 
-     if (*errp == NULL) {
--        create_backup_jobs();
-+        bool errors = create_backup_jobs();
-         qemu_mutex_unlock(&backup_state.backup_mutex);
--        pvebackup_run_next_job();
-+
-+        if (!errors) {
-+            /* start the first job in the transaction
-+             * note: this might directly enter the job, so we need to do this
-+             * after unlocking the backup_mutex */
-+            job_txn_start_seq(backup_state.txn);
-+        }
-     } else {
-         qemu_mutex_unlock(&backup_state.backup_mutex);
-     }

debian/patches/pve/0037-PVE-block-stream-increase-chunk-size.patch

@@ -11,10 +11,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/block/stream.c b/block/stream.c
-index e45113aed6..c3c0c5febe 100644
+index 7f9e1ecdbb..6a29d80398 100644
 --- a/block/stream.c
 +++ b/block/stream.c
-@@ -28,7 +28,7 @@ enum {
+@@ -27,7 +27,7 @@ enum {
       * large enough to process multiple clusters in a single call, so
       * that populating contiguous regions of the image is efficient.
       */

debian/patches/pve/0038-PVE-Backup-Don-t-block-on-finishing-and-cleanup-crea.patch

@@ -1,503 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Mon, 28 Sep 2020 13:40:51 +0200
-Subject: [PATCH] PVE-Backup: Don't block on finishing and cleanup
- create_backup_jobs
-
-proxmox_backup_co_finish is already async, but previously we would wait
-for the coroutine using block_on_coroutine_fn(). Avoid this by
-scheduling pvebackup_co_complete_stream (and thus pvebackup_co_cleanup)
-as a real coroutine when calling from pvebackup_complete_cb. This is ok,
-since complete_stream uses the backup_mutex internally to synchronize,
-and other streams can happily continue writing in the meantime anyway.
-
-To accomodate, backup_mutex is converted to a CoMutex. This means
-converting every user to a coroutine. This is not just useful here, but
-will come in handy once this series[0] is merged, and QMP calls can be
-yield-able coroutines too. Then we can also finally get rid of
-block_on_coroutine_fn.
-
-Cases of aio_context_acquire/release from within what is now a coroutine
-are changed to aio_co_reschedule_self, which works since a running
-coroutine always holds the aio lock for the context it is running in.
-
-job_cancel_sync is called from a BH since it can't be run from a
-coroutine (uses AIO_WAIT_WHILE internally).
-
-Same thing for create_backup_jobs, which is converted to a BH too.
-
-To communicate the finishing state, a new property is introduced to
-query-backup: 'finishing'. A new state is explicitly not used, since
-that would break compatibility with older qemu-server versions.
-
-Also fix create_backup_jobs:
-
-No more weird bool returns, just the standard "errp" format used
-everywhere else too. With this, if backup_job_create fails, the error
-message is actually returned over QMP and can be shown to the user.
-
-To facilitate correct cleanup on such an error, we call
-create_backup_jobs as a bottom half directly from pvebackup_co_prepare.
-This additionally allows us to actually hold the backup_mutex during
-operation.
-
-Also add a job_cancel_sync before job_unref, since a job must be in
-STATUS_NULL to be deleted by unref, which could trigger an assert
-before.
-
-[0] https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg03515.html
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[add new force parameter to job_cancel_sync calls]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
----
- pve-backup.c         | 217 ++++++++++++++++++++++++++++---------------
- qapi/block-core.json |   5 +-
- 2 files changed, 144 insertions(+), 78 deletions(-)
-
-diff --git a/pve-backup.c b/pve-backup.c
-index 63c686463f..6f05796fad 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -33,7 +33,9 @@ const char *PBS_BITMAP_NAME = "pbs-incremental-dirty-bitmap";
- 
- static struct PVEBackupState {
-     struct {
--        // Everithing accessed from qmp_backup_query command is protected using lock
-+        // Everything accessed from qmp_backup_query command is protected using
-+        // this lock. Do NOT hold this lock for long times, as it is sometimes
-+        // acquired from coroutines, and thus any wait time may block the guest.
-         QemuMutex lock;
-         Error *error;
-         time_t start_time;
-@@ -47,20 +49,22 @@ static struct PVEBackupState {
-         size_t reused;
-         size_t zero_bytes;
-         GList *bitmap_list;
-+        bool finishing;
-+        bool starting;
-     } stat;
-     int64_t speed;
-     VmaWriter *vmaw;
-     ProxmoxBackupHandle *pbs;
-     GList *di_list;
-     JobTxn *txn;
--    QemuMutex backup_mutex;
-+    CoMutex backup_mutex;
-     CoMutex dump_callback_mutex;
- } backup_state;
- 
- static void pvebackup_init(void)
- {
-     qemu_mutex_init(&backup_state.stat.lock);
--    qemu_mutex_init(&backup_state.backup_mutex);
-+    qemu_co_mutex_init(&backup_state.backup_mutex);
-     qemu_co_mutex_init(&backup_state.dump_callback_mutex);
- }
- 
-@@ -72,6 +76,7 @@ typedef struct PVEBackupDevInfo {
-     size_t size;
-     uint64_t block_size;
-     uint8_t dev_id;
-+    int completed_ret; // INT_MAX if not completed
-     char targetfile[PATH_MAX];
-     BdrvDirtyBitmap *bitmap;
-     BlockDriverState *target;
-@@ -227,12 +232,12 @@ pvebackup_co_dump_vma_cb(
- }
- 
- // assumes the caller holds backup_mutex
--static void coroutine_fn pvebackup_co_cleanup(void *unused)
-+static void coroutine_fn pvebackup_co_cleanup(void)
- {
-     assert(qemu_in_coroutine());
- 
-     qemu_mutex_lock(&backup_state.stat.lock);
--    backup_state.stat.end_time = time(NULL);
-+    backup_state.stat.finishing = true;
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-     if (backup_state.vmaw) {
-@@ -261,35 +266,29 @@ static void coroutine_fn pvebackup_co_cleanup(void *unused)
- 
-     g_list_free(backup_state.di_list);
-     backup_state.di_list = NULL;
-+
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+    backup_state.stat.end_time = time(NULL);
-+    backup_state.stat.finishing = false;
-+    qemu_mutex_unlock(&backup_state.stat.lock);
- }
- 
--// assumes the caller holds backup_mutex
--static void coroutine_fn pvebackup_complete_stream(void *opaque)
-+static void coroutine_fn pvebackup_co_complete_stream(void *opaque)
- {
-     PVEBackupDevInfo *di = opaque;
-+    int ret = di->completed_ret;
- 
--    bool error_or_canceled = pvebackup_error_or_canceled();
--
--    if (backup_state.vmaw) {
--        vma_writer_close_stream(backup_state.vmaw, di->dev_id);
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+    bool starting = backup_state.stat.starting;
-+    qemu_mutex_unlock(&backup_state.stat.lock);
-+    if (starting) {
-+        /* in 'starting' state, no tasks have been run yet, meaning we can (and
-+         * must) skip all cleanup, as we don't know what has and hasn't been
-+         * initialized yet. */
-+        return;
-     }
- 
--    if (backup_state.pbs && !error_or_canceled) {
--        Error *local_err = NULL;
--        proxmox_backup_co_close_image(backup_state.pbs, di->dev_id, &local_err);
--        if (local_err != NULL) {
--            pvebackup_propagate_error(local_err);
--        }
--    }
--}
--
--static void pvebackup_complete_cb(void *opaque, int ret)
--{
--    assert(!qemu_in_coroutine());
--
--    PVEBackupDevInfo *di = opaque;
--
--    qemu_mutex_lock(&backup_state.backup_mutex);
-+    qemu_co_mutex_lock(&backup_state.backup_mutex);
- 
-     if (ret < 0) {
-         Error *local_err = NULL;
-@@ -301,7 +300,19 @@ static void pvebackup_complete_cb(void *opaque, int ret)
- 
-     assert(di->target == NULL);
- 
--    block_on_coroutine_fn(pvebackup_complete_stream, di);
-+    bool error_or_canceled = pvebackup_error_or_canceled();
-+
-+    if (backup_state.vmaw) {
-+        vma_writer_close_stream(backup_state.vmaw, di->dev_id);
-+    }
-+
-+    if (backup_state.pbs && !error_or_canceled) {
-+        Error *local_err = NULL;
-+        proxmox_backup_co_close_image(backup_state.pbs, di->dev_id, &local_err);
-+        if (local_err != NULL) {
-+            pvebackup_propagate_error(local_err);
-+        }
-+    }
- 
-     // remove self from job list
-     backup_state.di_list = g_list_remove(backup_state.di_list, di);
-@@ -310,21 +321,49 @@ static void pvebackup_complete_cb(void *opaque, int ret)
- 
-     /* call cleanup if we're the last job */
-     if (!g_list_first(backup_state.di_list)) {
--        block_on_coroutine_fn(pvebackup_co_cleanup, NULL);
-+        pvebackup_co_cleanup();
-     }
- 
--    qemu_mutex_unlock(&backup_state.backup_mutex);
-+    qemu_co_mutex_unlock(&backup_state.backup_mutex);
- }
- 
--static void pvebackup_cancel(void)
-+static void pvebackup_complete_cb(void *opaque, int ret)
- {
--    assert(!qemu_in_coroutine());
-+    PVEBackupDevInfo *di = opaque;
-+    di->completed_ret = ret;
-+
-+    /*
-+     * Schedule stream cleanup in async coroutine. close_image and finish might
-+     * take a while, so we can't block on them here. This way it also doesn't
-+     * matter if we're already running in a coroutine or not.
-+     * Note: di is a pointer to an entry in the global backup_state struct, so
-+     * it stays valid.
-+     */
-+    Coroutine *co = qemu_coroutine_create(pvebackup_co_complete_stream, di);
-+    aio_co_enter(qemu_get_aio_context(), co);
-+}
-+
-+/*
-+ * job_cancel(_sync) does not like to be called from coroutines, so defer to
-+ * main loop processing via a bottom half.
-+ */
-+static void job_cancel_bh(void *opaque) {
-+    CoCtxData *data = (CoCtxData*)opaque;
-+    Job *job = (Job*)data->data;
-+    AioContext *job_ctx = job->aio_context;
-+    aio_context_acquire(job_ctx);
-+    job_cancel_sync(job, true);
-+    aio_context_release(job_ctx);
-+    aio_co_enter(data->ctx, data->co);
-+}
- 
-+static void coroutine_fn pvebackup_co_cancel(void *opaque)
-+{
-     Error *cancel_err = NULL;
-     error_setg(&cancel_err, "backup canceled");
-     pvebackup_propagate_error(cancel_err);
- 
--    qemu_mutex_lock(&backup_state.backup_mutex);
-+    qemu_co_mutex_lock(&backup_state.backup_mutex);
- 
-     if (backup_state.vmaw) {
-         /* make sure vma writer does not block anymore */
-@@ -342,27 +381,22 @@ static void pvebackup_cancel(void)
-         ((PVEBackupDevInfo *)bdi->data)->job :
-         NULL;
- 
--    /* ref the job before releasing the mutex, just to be safe */
-     if (cancel_job) {
--        job_ref(&cancel_job->job);
-+        CoCtxData data = {
-+            .ctx = qemu_get_current_aio_context(),
-+            .co = qemu_coroutine_self(),
-+            .data = &cancel_job->job,
-+        };
-+        aio_bh_schedule_oneshot(data.ctx, job_cancel_bh, &data);
-+        qemu_coroutine_yield();
-     }
- 
--    /* job_cancel_sync may enter the job, so we need to release the
--     * backup_mutex to avoid deadlock */
--    qemu_mutex_unlock(&backup_state.backup_mutex);
--
--    if (cancel_job) {
--        AioContext *aio_context = cancel_job->job.aio_context;
--        aio_context_acquire(aio_context);
--        job_cancel_sync(&cancel_job->job, true);
--        job_unref(&cancel_job->job);
--        aio_context_release(aio_context);
--    }
-+    qemu_co_mutex_unlock(&backup_state.backup_mutex);
- }
- 
- void qmp_backup_cancel(Error **errp)
- {
--    pvebackup_cancel();
-+    block_on_coroutine_fn(pvebackup_co_cancel, NULL);
- }
- 
- // assumes the caller holds backup_mutex
-@@ -415,10 +449,18 @@ static int coroutine_fn pvebackup_co_add_config(
-     goto out;
- }
- 
--static bool create_backup_jobs(void) {
-+/*
-+ * backup_job_create can *not* be run from a coroutine (and requires an
-+ * acquired AioContext), so this can't either.
-+ * The caller is responsible that backup_mutex is held nonetheless.
-+ */
-+static void create_backup_jobs_bh(void *opaque) {
- 
-     assert(!qemu_in_coroutine());
- 
-+    CoCtxData *data = (CoCtxData*)opaque;
-+    Error **errp = (Error**)data->data;
-+
-     Error *local_err = NULL;
- 
-     /* create job transaction to synchronize bitmap commit and cancel all
-@@ -454,24 +496,19 @@ static bool create_backup_jobs(void) {
- 
-         aio_context_release(aio_context);
- 
--        if (!job || local_err != NULL) {
--            Error *create_job_err = NULL;
--            error_setg(&create_job_err, "backup_job_create failed: %s",
--                       local_err ? error_get_pretty(local_err) : "null");
-+        di->job = job;
- 
--            pvebackup_propagate_error(create_job_err);
-+        if (!job || local_err) {
-+            error_setg(errp, "backup_job_create failed: %s",
-+                       local_err ? error_get_pretty(local_err) : "null");
-             break;
-         }
- 
--        di->job = job;
--
-         bdrv_unref(di->target);
-         di->target = NULL;
-     }
- 
--    bool errors = pvebackup_error_or_canceled();
--
--    if (errors) {
-+    if (*errp) {
-         l = backup_state.di_list;
-         while (l) {
-             PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-@@ -483,12 +520,17 @@ static bool create_backup_jobs(void) {
-             }
- 
-             if (di->job) {
-+                AioContext *ctx = di->job->job.aio_context;
-+                aio_context_acquire(ctx);
-+                job_cancel_sync(&di->job->job, true);
-                 job_unref(&di->job->job);
-+                aio_context_release(ctx);
-             }
-         }
-     }
- 
--    return errors;
-+    /* return */
-+    aio_co_enter(data->ctx, data->co);
- }
- 
- typedef struct QmpBackupTask {
-@@ -525,11 +567,12 @@ typedef struct QmpBackupTask {
-     UuidInfo *result;
- } QmpBackupTask;
- 
--// assumes the caller holds backup_mutex
- static void coroutine_fn pvebackup_co_prepare(void *opaque)
- {
-     assert(qemu_in_coroutine());
- 
-+    qemu_co_mutex_lock(&backup_state.backup_mutex);
-+
-     QmpBackupTask *task = opaque;
- 
-     task->result = NULL; // just to be sure
-@@ -550,8 +593,9 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     const char *firewall_name = "qemu-server.fw";
- 
-     if (backup_state.di_list) {
--         error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-+        error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-                   "previous backup not finished");
-+        qemu_co_mutex_unlock(&backup_state.backup_mutex);
-         return;
-     }
- 
-@@ -618,6 +662,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-         }
-         di->size = size;
-         total += size;
-+
-+        di->completed_ret = INT_MAX;
-     }
- 
-     uuid_generate(uuid);
-@@ -849,6 +895,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     backup_state.stat.dirty = total - backup_state.stat.reused;
-     backup_state.stat.transferred = 0;
-     backup_state.stat.zero_bytes = 0;
-+    backup_state.stat.finishing = false;
-+    backup_state.stat.starting = true;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-@@ -863,6 +911,33 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     uuid_info->UUID = uuid_str;
- 
-     task->result = uuid_info;
-+
-+    /* Run create_backup_jobs_bh outside of coroutine (in BH) but keep
-+    * backup_mutex locked. This is fine, a CoMutex can be held across yield
-+    * points, and we'll release it as soon as the BH reschedules us.
-+    */
-+    CoCtxData waker = {
-+        .co = qemu_coroutine_self(),
-+        .ctx = qemu_get_current_aio_context(),
-+        .data = &local_err,
-+    };
-+    aio_bh_schedule_oneshot(waker.ctx, create_backup_jobs_bh, &waker);
-+    qemu_coroutine_yield();
-+
-+    if (local_err) {
-+        error_propagate(task->errp, local_err);
-+        goto err;
-+    }
-+
-+    qemu_co_mutex_unlock(&backup_state.backup_mutex);
-+
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+    backup_state.stat.starting = false;
-+    qemu_mutex_unlock(&backup_state.stat.lock);
-+
-+    /* start the first job in the transaction */
-+    job_txn_start_seq(backup_state.txn);
-+
-     return;
- 
- err_mutex:
-@@ -885,6 +960,7 @@ err:
-         g_free(di);
-     }
-     g_list_free(di_list);
-+    backup_state.di_list = NULL;
- 
-     if (devs) {
-         g_strfreev(devs);
-@@ -905,6 +981,8 @@ err:
-     }
- 
-     task->result = NULL;
-+
-+    qemu_co_mutex_unlock(&backup_state.backup_mutex);
-     return;
- }
- 
-@@ -958,24 +1036,8 @@ UuidInfo *qmp_backup(
-         .errp = errp,
-     };
- 
--    qemu_mutex_lock(&backup_state.backup_mutex);
--
-     block_on_coroutine_fn(pvebackup_co_prepare, &task);
- 
--    if (*errp == NULL) {
--        bool errors = create_backup_jobs();
--        qemu_mutex_unlock(&backup_state.backup_mutex);
--
--        if (!errors) {
--            /* start the first job in the transaction
--             * note: this might directly enter the job, so we need to do this
--             * after unlocking the backup_mutex */
--            job_txn_start_seq(backup_state.txn);
--        }
--    } else {
--        qemu_mutex_unlock(&backup_state.backup_mutex);
--    }
--
-     return task.result;
- }
- 
-@@ -1027,6 +1089,7 @@ BackupStatus *qmp_query_backup(Error **errp)
-     info->transferred = backup_state.stat.transferred;
-     info->has_reused = true;
-     info->reused = backup_state.stat.reused;
-+    info->finishing = backup_state.stat.finishing;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 8833060385..6a67adf923 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -774,12 +774,15 @@
- #
- # @uuid: uuid for this backup job
- #
-+# @finishing: if status='active' and finishing=true, then the backup process is
-+#             waiting for the target to finish.
-+#
- ##
- { 'struct': 'BackupStatus',
-   'data': {'*status': 'str', '*errmsg': 'str', '*total': 'int', '*dirty': 'int',
-            '*transferred': 'int', '*zero-bytes': 'int', '*reused': 'int',
-            '*start-time': 'int', '*end-time': 'int',
--           '*backup-file': 'str', '*uuid': 'str' } }
-+           '*backup-file': 'str', '*uuid': 'str', 'finishing': 'bool' } }
- 
- ##
- # @BackupFormat:

debian/patches/pve/0038-block-io-accept-NULL-qiov-in-bdrv_pad_request.patch

@@ -17,10 +17,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 4 insertions(+)
 
 diff --git a/block/io.c b/block/io.c
-index 4e4cb556c5..04061f1e68 100644
+index 2e267a85ab..449a44bf20 100644
 --- a/block/io.c
 +++ b/block/io.c
-@@ -1765,6 +1765,10 @@ static int bdrv_pad_request(BlockDriverState *bs,
+@@ -1576,6 +1576,10 @@ static int bdrv_pad_request(BlockDriverState *bs,
  {
      int ret;
  

debian/patches/pve/0039-block-add-alloc-track-driver.patch

@@ -24,20 +24,22 @@ once the backing image is removed. It will be replaced by 'file'.
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[adapt to changed function signatures]
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+[FE: adapt to changed function signatures
+     make error return value consistent with QEMU
+     avoid premature break during read]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/alloc-track.c | 350 ++++++++++++++++++++++++++++++++++++++++++++
+ block/alloc-track.c | 352 ++++++++++++++++++++++++++++++++++++++++++++
  block/meson.build   |   1 +
- 2 files changed, 351 insertions(+)
+ 2 files changed, 353 insertions(+)
  create mode 100644 block/alloc-track.c
 
 diff --git a/block/alloc-track.c b/block/alloc-track.c
 new file mode 100644
-index 0000000000..6b50fbe537
+index 0000000000..b75d7c6460
 --- /dev/null
 +++ b/block/alloc-track.c
-@@ -0,0 +1,350 @@
+@@ -0,0 +1,352 @@
 +/*
 + * Node to allow backing images to be applied to any node. Assumes a blank
 + * image to begin with, only new writes are tracked as allocated, thus this
@@ -53,6 +55,7 @@ index 0000000000..6b50fbe537
 +#include "qemu/osdep.h"
 +#include "qapi/error.h"
 +#include "block/block_int.h"
++#include "block/dirty-bitmap.h"
 +#include "qapi/qmp/qdict.h"
 +#include "qapi/qmp/qstring.h"
 +#include "qemu/cutils.h"
@@ -162,9 +165,9 @@ index 0000000000..6b50fbe537
 +    }
 +}
 +
-+static int64_t track_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t track_co_getlength(BlockDriverState *bs)
 +{
-+    return bdrv_getlength(bs->file->bs);
++    return bdrv_co_getlength(bs->file->bs);
 +}
 +
 +static int coroutine_fn track_co_preadv(BlockDriverState *bs,
@@ -181,7 +184,7 @@ index 0000000000..6b50fbe537
 +
 +    if (offset < 0 || bytes < 0) {
 +        fprintf(stderr, "unexpected negative 'offset' or 'bytes' value!\n");
-+        return -EINVAL;
++        return -EIO;
 +    }
 +
 +    /* a read request can span multiple granularity-sized chunks, and can thus
@@ -214,7 +217,8 @@ index 0000000000..6b50fbe537
 +            ret = bdrv_co_preadv(bs->backing, local_offset, local_bytes,
 +                                 &local_qiov, flags);
 +        } else {
-+            ret = qemu_iovec_memset(&local_qiov, cur_offset, 0, local_bytes);
++            qemu_iovec_memset(&local_qiov, cur_offset, 0, local_bytes);
++            ret = 0;
 +        }
 +
 +        if (ret != 0) {
@@ -364,7 +368,7 @@ index 0000000000..6b50fbe537
 +
 +    .bdrv_file_open                   = track_open,
 +    .bdrv_close                       = track_close,
-+    .bdrv_getlength                   = track_getlength,
++    .bdrv_co_getlength                = track_co_getlength,
 +    .bdrv_child_perm                  = track_child_perm,
 +    .bdrv_refresh_limits              = track_refresh_limits,
 +
@@ -389,7 +393,7 @@ index 0000000000..6b50fbe537
 +
 +block_init(bdrv_alloc_track_init);
 diff --git a/block/meson.build b/block/meson.build
-index 8c758c0218..45b72e10f1 100644
+index eece0d5743..8a68162cc0 100644
 --- a/block/meson.build
 +++ b/block/meson.build
 @@ -2,6 +2,7 @@ block_ss.add(genh)

debian/patches/pve/0040-Revert-block-rbd-workaround-for-ceph-issue-53784.patch

@@ -0,0 +1,80 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fabian Ebner <f.ebner@proxmox.com>
+Date: Thu, 23 Jun 2022 14:00:05 +0200
+Subject: [PATCH] Revert "block/rbd: workaround for ceph issue #53784"
+
+This reverts commit fc176116cdea816ceb8dd969080b2b95f58edbc0 in
+preparation to revert 0347a8fd4c3faaedf119be04c197804be40a384b.
+
+Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+---
+ block/rbd.c | 42 ++----------------------------------------
+ 1 file changed, 2 insertions(+), 40 deletions(-)
+
+diff --git a/block/rbd.c b/block/rbd.c
+index a4749f3b1b..53e0396b51 100644
+--- a/block/rbd.c
++++ b/block/rbd.c
+@@ -1511,7 +1511,6 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+     int status, r;
+     RBDDiffIterateReq req = { .offs = offset };
+     uint64_t features, flags;
+-    uint64_t head = 0;
+ 
+     assert(offset + bytes <= s->image_size);
+ 
+@@ -1539,43 +1538,7 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+         return status;
+     }
+ 
+-#if LIBRBD_VERSION_CODE < LIBRBD_VERSION(1, 17, 0)
+-    /*
+-     * librbd had a bug until early 2022 that affected all versions of ceph that
+-     * supported fast-diff. This bug results in reporting of incorrect offsets
+-     * if the offset parameter to rbd_diff_iterate2 is not object aligned.
+-     * Work around this bug by rounding down the offset to object boundaries.
+-     * This is OK because we call rbd_diff_iterate2 with whole_object = true.
+-     * However, this workaround only works for non cloned images with default
+-     * striping.
+-     *
+-     * See: https://tracker.ceph.com/issues/53784
+-     */
+-
+-    /* check if RBD image has non-default striping enabled */
+-    if (features & RBD_FEATURE_STRIPINGV2) {
+-        return status;
+-    }
+-
+-#pragma GCC diagnostic push
+-#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
+-    /*
+-     * check if RBD image is a clone (= has a parent).
+-     *
+-     * rbd_get_parent_info is deprecated from Nautilus onwards, but the
+-     * replacement rbd_get_parent is not present in Luminous and Mimic.
+-     */
+-    if (rbd_get_parent_info(s->image, NULL, 0, NULL, 0, NULL, 0) != -ENOENT) {
+-        return status;
+-    }
+-#pragma GCC diagnostic pop
+-
+-    head = req.offs & (s->object_size - 1);
+-    req.offs -= head;
+-    bytes += head;
+-#endif
+-
+-    r = rbd_diff_iterate2(s->image, NULL, req.offs, bytes, true, true,
++    r = rbd_diff_iterate2(s->image, NULL, offset, bytes, true, true,
+                           qemu_rbd_diff_iterate_cb, &req);
+     if (r < 0 && r != QEMU_RBD_EXIT_DIFF_ITERATE2) {
+         return status;
+@@ -1594,8 +1557,7 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+         status = BDRV_BLOCK_ZERO | BDRV_BLOCK_OFFSET_VALID;
+     }
+ 
+-    assert(req.bytes > head);
+-    *pnum = req.bytes - head;
++    *pnum = req.bytes;
+     return status;
+ }
+ 

debian/patches/pve/0041-Revert-block-rbd-fix-handling-of-holes-in-.bdrv_co_b.patch

@@ -0,0 +1,35 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fabian Ebner <f.ebner@proxmox.com>
+Date: Thu, 23 Jun 2022 14:00:07 +0200
+Subject: [PATCH] Revert "block/rbd: fix handling of holes in
+ .bdrv_co_block_status"
+
+This reverts commit 9e302f64bb407a9bb097b626da97228c2654cfee in
+preparation to revert 0347a8fd4c3faaedf119be04c197804be40a384b.
+
+Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+---
+ block/rbd.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/block/rbd.c b/block/rbd.c
+index 53e0396b51..0913a0af39 100644
+--- a/block/rbd.c
++++ b/block/rbd.c
+@@ -1470,11 +1470,11 @@ static int qemu_rbd_diff_iterate_cb(uint64_t offs, size_t len,
+     RBDDiffIterateReq *req = opaque;
+ 
+     assert(req->offs + req->bytes <= offs);
+-
+-    /* treat a hole like an unallocated area and bail out */
+-    if (!exists) {
+-        return 0;
+-    }
++    /*
++     * we do not diff against a snapshot so we should never receive a callback
++     * for a hole.
++     */
++    assert(exists);
+ 
+     if (!req->exists && offs > req->offs) {
+         /*

debian/patches/pve/0042-PVE-Use-coroutine-QMP-for-backup-cancel_backup.patch

@@ -1,598 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Tue, 26 Jan 2021 15:45:30 +0100
-Subject: [PATCH] PVE: Use coroutine QMP for backup/cancel_backup
-
-Finally turn backup QMP calls into coroutines, now that it's possible.
-This has the benefit that calls are asynchronous to the main loop, i.e.
-long running operations like connecting to a PBS server will no longer
-hang the VM.
-
-Additionally, it allows us to get rid of block_on_coroutine_fn, which
-was always a hacky workaround.
-
-While we're already spring cleaning, also remove the QmpBackupTask
-struct, since we can now put the 'prepare' function directly into
-qmp_backup and thus no longer need those giant walls of text.
-
-(Note that for our patches to work with 5.2.0 this change is actually
-required, otherwise monitor_get_fd() fails as we're not in a QMP
-coroutine, but one we start ourselves - we could of course set the
-monitor for that coroutine ourselves, but let's just fix it the right
-way instead)
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- block/monitor/block-hmp-cmds.c |   4 +-
- hmp-commands.hx                |   2 +
- proxmox-backup-client.c        |  31 -----
- pve-backup.c                   | 232 ++++++++++-----------------------
- qapi/block-core.json           |   4 +-
- 5 files changed, 77 insertions(+), 196 deletions(-)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index 4481b60a5c..c9849a5b29 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1016,7 +1016,7 @@ void hmp_info_snapshots(Monitor *mon, const QDict *qdict)
-     g_free(global_snapshots);
- }
- 
--void hmp_backup_cancel(Monitor *mon, const QDict *qdict)
-+void coroutine_fn hmp_backup_cancel(Monitor *mon, const QDict *qdict)
- {
-     Error *error = NULL;
- 
-@@ -1025,7 +1025,7 @@ void hmp_backup_cancel(Monitor *mon, const QDict *qdict)
-     hmp_handle_error(mon, error);
- }
- 
--void hmp_backup(Monitor *mon, const QDict *qdict)
-+void coroutine_fn hmp_backup(Monitor *mon, const QDict *qdict)
- {
-     Error *error = NULL;
- 
-diff --git a/hmp-commands.hx b/hmp-commands.hx
-index d4bb00216e..4e21911fa6 100644
---- a/hmp-commands.hx
-+++ b/hmp-commands.hx
-@@ -109,6 +109,7 @@ ERST
- 		    "\n\t\t\t Use -d to dump data into a directory instead"
- 		    "\n\t\t\t of using VMA format.",
-         .cmd = hmp_backup,
-+        .coroutine  = true,
-     },
- 
- SRST
-@@ -122,6 +123,7 @@ ERST
-         .params     = "",
-         .help       = "cancel the current VM backup",
-         .cmd        = hmp_backup_cancel,
-+        .coroutine  = true,
-     },
- 
- SRST
-diff --git a/proxmox-backup-client.c b/proxmox-backup-client.c
-index 4ce7bc0b5e..0923037dec 100644
---- a/proxmox-backup-client.c
-+++ b/proxmox-backup-client.c
-@@ -5,37 +5,6 @@
- 
- /* Proxmox Backup Server client bindings using coroutines */
- 
--typedef struct BlockOnCoroutineWrapper {
--    AioContext *ctx;
--    CoroutineEntry *entry;
--    void *entry_arg;
--    bool finished;
--} BlockOnCoroutineWrapper;
--
--static void coroutine_fn block_on_coroutine_wrapper(void *opaque)
--{
--    BlockOnCoroutineWrapper *wrapper = opaque;
--    wrapper->entry(wrapper->entry_arg);
--    wrapper->finished = true;
--    aio_wait_kick();
--}
--
--void block_on_coroutine_fn(CoroutineEntry *entry, void *entry_arg)
--{
--    assert(!qemu_in_coroutine());
--
--    AioContext *ctx = qemu_get_current_aio_context();
--    BlockOnCoroutineWrapper wrapper = {
--        .finished = false,
--        .entry = entry,
--        .entry_arg = entry_arg,
--        .ctx = ctx,
--    };
--    Coroutine *wrapper_co = qemu_coroutine_create(block_on_coroutine_wrapper, &wrapper);
--    aio_co_enter(ctx, wrapper_co);
--    AIO_WAIT_WHILE(ctx, !wrapper.finished);
--}
--
- // This is called from another thread, so we use aio_co_schedule()
- static void proxmox_backup_schedule_wake(void *data) {
-     CoCtxData *waker = (CoCtxData *)data;
-diff --git a/pve-backup.c b/pve-backup.c
-index 5fa3cc1352..323014744c 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -357,7 +357,7 @@ static void job_cancel_bh(void *opaque) {
-     aio_co_enter(data->ctx, data->co);
- }
- 
--static void coroutine_fn pvebackup_co_cancel(void *opaque)
-+void coroutine_fn qmp_backup_cancel(Error **errp)
- {
-     Error *cancel_err = NULL;
-     error_setg(&cancel_err, "backup canceled");
-@@ -394,11 +394,6 @@ static void coroutine_fn pvebackup_co_cancel(void *opaque)
-     qemu_co_mutex_unlock(&backup_state.backup_mutex);
- }
- 
--void qmp_backup_cancel(Error **errp)
--{
--    block_on_coroutine_fn(pvebackup_co_cancel, NULL);
--}
--
- // assumes the caller holds backup_mutex
- static int coroutine_fn pvebackup_co_add_config(
-     const char *file,
-@@ -533,50 +528,27 @@ static void create_backup_jobs_bh(void *opaque) {
-     aio_co_enter(data->ctx, data->co);
- }
- 
--typedef struct QmpBackupTask {
--    const char *backup_file;
--    bool has_password;
--    const char *password;
--    bool has_keyfile;
--    const char *keyfile;
--    bool has_key_password;
--    const char *key_password;
--    bool has_backup_id;
--    const char *backup_id;
--    bool has_backup_time;
--    const char *fingerprint;
--    bool has_fingerprint;
--    int64_t backup_time;
--    bool has_use_dirty_bitmap;
--    bool use_dirty_bitmap;
--    bool has_format;
--    BackupFormat format;
--    bool has_config_file;
--    const char *config_file;
--    bool has_firewall_file;
--    const char *firewall_file;
--    bool has_devlist;
--    const char *devlist;
--    bool has_compress;
--    bool compress;
--    bool has_encrypt;
--    bool encrypt;
--    bool has_speed;
--    int64_t speed;
--    Error **errp;
--    UuidInfo *result;
--} QmpBackupTask;
--
--static void coroutine_fn pvebackup_co_prepare(void *opaque)
-+UuidInfo coroutine_fn *qmp_backup(
-+    const char *backup_file,
-+    bool has_password, const char *password,
-+    bool has_keyfile, const char *keyfile,
-+    bool has_key_password, const char *key_password,
-+    bool has_fingerprint, const char *fingerprint,
-+    bool has_backup_id, const char *backup_id,
-+    bool has_backup_time, int64_t backup_time,
-+    bool has_use_dirty_bitmap, bool use_dirty_bitmap,
-+    bool has_compress, bool compress,
-+    bool has_encrypt, bool encrypt,
-+    bool has_format, BackupFormat format,
-+    bool has_config_file, const char *config_file,
-+    bool has_firewall_file, const char *firewall_file,
-+    bool has_devlist, const char *devlist,
-+    bool has_speed, int64_t speed, Error **errp)
- {
-     assert(qemu_in_coroutine());
- 
-     qemu_co_mutex_lock(&backup_state.backup_mutex);
- 
--    QmpBackupTask *task = opaque;
--
--    task->result = NULL; // just to be sure
--
-     BlockBackend *blk;
-     BlockDriverState *bs = NULL;
-     const char *backup_dir = NULL;
-@@ -593,17 +565,17 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     const char *firewall_name = "qemu-server.fw";
- 
-     if (backup_state.di_list) {
--        error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-                   "previous backup not finished");
-         qemu_co_mutex_unlock(&backup_state.backup_mutex);
--        return;
-+        return NULL;
-     }
- 
-     /* Todo: try to auto-detect format based on file name */
--    BackupFormat format = task->has_format ? task->format : BACKUP_FORMAT_VMA;
-+    format = has_format ? format : BACKUP_FORMAT_VMA;
- 
--    if (task->has_devlist) {
--        devs = g_strsplit_set(task->devlist, ",;:", -1);
-+    if (has_devlist) {
-+        devs = g_strsplit_set(devlist, ",;:", -1);
- 
-         gchar **d = devs;
-         while (d && *d) {
-@@ -611,14 +583,14 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             if (blk) {
-                 bs = blk_bs(blk);
-                 if (!bdrv_is_inserted(bs)) {
--                    error_setg(task->errp, QERR_DEVICE_HAS_NO_MEDIUM, *d);
-+                    error_setg(errp, QERR_DEVICE_HAS_NO_MEDIUM, *d);
-                     goto err;
-                 }
-                 PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
-                 di->bs = bs;
-                 di_list = g_list_append(di_list, di);
-             } else {
--                error_set(task->errp, ERROR_CLASS_DEVICE_NOT_FOUND,
-+                error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
-                           "Device '%s' not found", *d);
-                 goto err;
-             }
-@@ -641,7 +613,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     }
- 
-     if (!di_list) {
--        error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "empty device list");
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "empty device list");
-         goto err;
-     }
- 
-@@ -651,13 +623,13 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     while (l) {
-         PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-         l = g_list_next(l);
--        if (bdrv_op_is_blocked(di->bs, BLOCK_OP_TYPE_BACKUP_SOURCE, task->errp)) {
-+        if (bdrv_op_is_blocked(di->bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
-             goto err;
-         }
- 
-         ssize_t size = bdrv_getlength(di->bs);
-         if (size < 0) {
--            error_setg_errno(task->errp, -di->size, "bdrv_getlength failed");
-+            error_setg_errno(errp, -di->size, "bdrv_getlength failed");
-             goto err;
-         }
-         di->size = size;
-@@ -684,47 +656,44 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     }
- 
-     if (format == BACKUP_FORMAT_PBS) {
--        if (!task->has_password) {
--            error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'password'");
-+        if (!has_password) {
-+            error_set(errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'password'");
-             goto err_mutex;
-         }
--        if (!task->has_backup_id) {
--            error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-id'");
-+        if (!has_backup_id) {
-+            error_set(errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-id'");
-             goto err_mutex;
-         }
--        if (!task->has_backup_time) {
--            error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-time'");
-+        if (!has_backup_time) {
-+            error_set(errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-time'");
-             goto err_mutex;
-         }
- 
-         int dump_cb_block_size = PROXMOX_BACKUP_DEFAULT_CHUNK_SIZE; // Hardcoded (4M)
-         firewall_name = "fw.conf";
- 
--        bool use_dirty_bitmap = task->has_use_dirty_bitmap && task->use_dirty_bitmap;
--
--
-         char *pbs_err = NULL;
-         pbs = proxmox_backup_new(
--            task->backup_file,
--            task->backup_id,
--            task->backup_time,
-+            backup_file,
-+            backup_id,
-+            backup_time,
-             dump_cb_block_size,
--            task->has_password ? task->password : NULL,
--            task->has_keyfile ? task->keyfile : NULL,
--            task->has_key_password ? task->key_password : NULL,
--            task->has_compress ? task->compress : true,
--            task->has_encrypt ? task->encrypt : task->has_keyfile,
--            task->has_fingerprint ? task->fingerprint : NULL,
-+            has_password ? password : NULL,
-+            has_keyfile ? keyfile : NULL,
-+            has_key_password ? key_password : NULL,
-+            has_compress ? compress : true,
-+            has_encrypt ? encrypt : has_keyfile,
-+            has_fingerprint ? fingerprint : NULL,
-              &pbs_err);
- 
-         if (!pbs) {
--            error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-+            error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-                       "proxmox_backup_new failed: %s", pbs_err);
-             proxmox_backup_free_error(pbs_err);
-             goto err_mutex;
-         }
- 
--        int connect_result = proxmox_backup_co_connect(pbs, task->errp);
-+        int connect_result = proxmox_backup_co_connect(pbs, errp);
-         if (connect_result < 0)
-             goto err_mutex;
- 
-@@ -743,9 +712,9 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             BdrvDirtyBitmap *bitmap = bdrv_find_dirty_bitmap(di->bs, PBS_BITMAP_NAME);
-             bool expect_only_dirty = false;
- 
--            if (use_dirty_bitmap) {
-+            if (has_use_dirty_bitmap && use_dirty_bitmap) {
-                 if (bitmap == NULL) {
--                    bitmap = bdrv_create_dirty_bitmap(di->bs, dump_cb_block_size, PBS_BITMAP_NAME, task->errp);
-+                    bitmap = bdrv_create_dirty_bitmap(di->bs, dump_cb_block_size, PBS_BITMAP_NAME, errp);
-                     if (!bitmap) {
-                         goto err_mutex;
-                     }
-@@ -775,12 +744,12 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-                 }
-             }
- 
--            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, task->errp);
-+            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, errp);
-             if (dev_id < 0) {
-                 goto err_mutex;
-             }
- 
--            if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, task->errp))) {
-+            if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, errp))) {
-                 goto err_mutex;
-             }
- 
-@@ -794,10 +763,10 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             backup_state.stat.bitmap_list = g_list_append(backup_state.stat.bitmap_list, info);
-         }
-     } else if (format == BACKUP_FORMAT_VMA) {
--        vmaw = vma_writer_create(task->backup_file, uuid, &local_err);
-+        vmaw = vma_writer_create(backup_file, uuid, &local_err);
-         if (!vmaw) {
-             if (local_err) {
--                error_propagate(task->errp, local_err);
-+                error_propagate(errp, local_err);
-             }
-             goto err_mutex;
-         }
-@@ -808,25 +777,25 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-             l = g_list_next(l);
- 
--            if (!(di->target = bdrv_backup_dump_create(VMA_CLUSTER_SIZE, di->size, pvebackup_co_dump_vma_cb, di, task->errp))) {
-+            if (!(di->target = bdrv_backup_dump_create(VMA_CLUSTER_SIZE, di->size, pvebackup_co_dump_vma_cb, di, errp))) {
-                 goto err_mutex;
-             }
- 
-             const char *devname = bdrv_get_device_name(di->bs);
-             di->dev_id = vma_writer_register_stream(vmaw, devname, di->size);
-             if (di->dev_id <= 0) {
--                error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-+                error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-                           "register_stream failed");
-                 goto err_mutex;
-             }
-         }
-     } else if (format == BACKUP_FORMAT_DIR) {
--        if (mkdir(task->backup_file, 0640) != 0) {
--            error_setg_errno(task->errp, errno, "can't create directory '%s'\n",
--                             task->backup_file);
-+        if (mkdir(backup_file, 0640) != 0) {
-+            error_setg_errno(errp, errno, "can't create directory '%s'\n",
-+                             backup_file);
-             goto err_mutex;
-         }
--        backup_dir = task->backup_file;
-+        backup_dir = backup_file;
- 
-         l = di_list;
-         while (l) {
-@@ -840,34 +809,34 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             bdrv_img_create(di->targetfile, "raw", NULL, NULL, NULL,
-                             di->size, flags, false, &local_err);
-             if (local_err) {
--                error_propagate(task->errp, local_err);
-+                error_propagate(errp, local_err);
-                 goto err_mutex;
-             }
- 
-             di->target = bdrv_open(di->targetfile, NULL, NULL, flags, &local_err);
-             if (!di->target) {
--                error_propagate(task->errp, local_err);
-+                error_propagate(errp, local_err);
-                 goto err_mutex;
-             }
-         }
-     } else {
--        error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "unknown backup format");
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "unknown backup format");
-         goto err_mutex;
-     }
- 
- 
-     /* add configuration file to archive */
--    if (task->has_config_file) {
--        if (pvebackup_co_add_config(task->config_file, config_name, format, backup_dir,
--                                    vmaw, pbs, task->errp) != 0) {
-+    if (has_config_file) {
-+        if (pvebackup_co_add_config(config_file, config_name, format, backup_dir,
-+                                    vmaw, pbs, errp) != 0) {
-             goto err_mutex;
-         }
-     }
- 
-     /* add firewall file to archive */
--    if (task->has_firewall_file) {
--        if (pvebackup_co_add_config(task->firewall_file, firewall_name, format, backup_dir,
--                                    vmaw, pbs, task->errp) != 0) {
-+    if (has_firewall_file) {
-+        if (pvebackup_co_add_config(firewall_file, firewall_name, format, backup_dir,
-+                                    vmaw, pbs, errp) != 0) {
-             goto err_mutex;
-         }
-     }
-@@ -885,7 +854,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     if (backup_state.stat.backup_file) {
-         g_free(backup_state.stat.backup_file);
-     }
--    backup_state.stat.backup_file = g_strdup(task->backup_file);
-+    backup_state.stat.backup_file = g_strdup(backup_file);
- 
-     uuid_copy(backup_state.stat.uuid, uuid);
-     uuid_unparse_lower(uuid, backup_state.stat.uuid_str);
-@@ -900,7 +869,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
--    backup_state.speed = (task->has_speed && task->speed > 0) ? task->speed : 0;
-+    backup_state.speed = (has_speed && speed > 0) ? speed : 0;
- 
-     backup_state.vmaw = vmaw;
-     backup_state.pbs = pbs;
-@@ -910,8 +879,6 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     uuid_info = g_malloc0(sizeof(*uuid_info));
-     uuid_info->UUID = uuid_str;
- 
--    task->result = uuid_info;
--
-     /* Run create_backup_jobs_bh outside of coroutine (in BH) but keep
-     * backup_mutex locked. This is fine, a CoMutex can be held across yield
-     * points, and we'll release it as soon as the BH reschedules us.
-@@ -925,7 +892,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     qemu_coroutine_yield();
- 
-     if (local_err) {
--        error_propagate(task->errp, local_err);
-+        error_propagate(errp, local_err);
-         goto err;
-     }
- 
-@@ -938,7 +905,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     /* start the first job in the transaction */
-     job_txn_start_seq(backup_state.txn);
- 
--    return;
-+    return uuid_info;
- 
- err_mutex:
-     qemu_mutex_unlock(&backup_state.stat.lock);
-@@ -969,7 +936,7 @@ err:
-     if (vmaw) {
-         Error *err = NULL;
-         vma_writer_close(vmaw, &err);
--        unlink(task->backup_file);
-+        unlink(backup_file);
-     }
- 
-     if (pbs) {
-@@ -980,65 +947,8 @@ err:
-         rmdir(backup_dir);
-     }
- 
--    task->result = NULL;
--
-     qemu_co_mutex_unlock(&backup_state.backup_mutex);
--    return;
--}
--
--UuidInfo *qmp_backup(
--    const char *backup_file,
--    bool has_password, const char *password,
--    bool has_keyfile, const char *keyfile,
--    bool has_key_password, const char *key_password,
--    bool has_fingerprint, const char *fingerprint,
--    bool has_backup_id, const char *backup_id,
--    bool has_backup_time, int64_t backup_time,
--    bool has_use_dirty_bitmap, bool use_dirty_bitmap,
--    bool has_compress, bool compress,
--    bool has_encrypt, bool encrypt,
--    bool has_format, BackupFormat format,
--    bool has_config_file, const char *config_file,
--    bool has_firewall_file, const char *firewall_file,
--    bool has_devlist, const char *devlist,
--    bool has_speed, int64_t speed, Error **errp)
--{
--    QmpBackupTask task = {
--        .backup_file = backup_file,
--        .has_password = has_password,
--        .password = password,
--        .has_keyfile = has_keyfile,
--        .keyfile = keyfile,
--        .has_key_password = has_key_password,
--        .key_password = key_password,
--        .has_fingerprint = has_fingerprint,
--        .fingerprint = fingerprint,
--        .has_backup_id = has_backup_id,
--        .backup_id = backup_id,
--        .has_backup_time = has_backup_time,
--        .backup_time = backup_time,
--        .has_use_dirty_bitmap = has_use_dirty_bitmap,
--        .use_dirty_bitmap = use_dirty_bitmap,
--        .has_compress = has_compress,
--        .compress = compress,
--        .has_encrypt = has_encrypt,
--        .encrypt = encrypt,
--        .has_format = has_format,
--        .format = format,
--        .has_config_file = has_config_file,
--        .config_file = config_file,
--        .has_firewall_file = has_firewall_file,
--        .firewall_file = firewall_file,
--        .has_devlist = has_devlist,
--        .devlist = devlist,
--        .has_speed = has_speed,
--        .speed = speed,
--        .errp = errp,
--    };
--
--    block_on_coroutine_fn(pvebackup_co_prepare, &task);
--
--    return task.result;
-+    return NULL;
- }
- 
- BackupStatus *qmp_query_backup(Error **errp)
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index c99ddf8628..829dc7b8e9 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -846,7 +846,7 @@
-                                     '*config-file': 'str',
-                                     '*firewall-file': 'str',
-                                     '*devlist': 'str', '*speed': 'int' },
--  'returns': 'UuidInfo' }
-+  'returns': 'UuidInfo', 'coroutine': true }
- 
- ##
- # @query-backup:
-@@ -868,7 +868,7 @@
- # Notes: This command succeeds even if there is no backup process running.
- #
- ##
--{ 'command': 'backup-cancel' }
-+{ 'command': 'backup-cancel', 'coroutine': true }
- 
- ##
- # @ProxmoxSupportStatus:

debian/patches/pve/0042-Revert-block-rbd-implement-bdrv_co_block_status.patch

@@ -23,10 +23,10 @@ Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
  1 file changed, 112 deletions(-)
 
 diff --git a/block/rbd.c b/block/rbd.c
-index a4b8fb482c..3393b06a4e 100644
+index 0913a0af39..1dab254517 100644
 --- a/block/rbd.c
 +++ b/block/rbd.c
-@@ -97,12 +97,6 @@ typedef struct RBDTask {
+@@ -108,12 +108,6 @@ typedef struct RBDTask {
      int64_t ret;
  } RBDTask;
  
@@ -39,7 +39,7 @@ index a4b8fb482c..3393b06a4e 100644
  static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
                              BlockdevOptionsRbd *opts, bool cache,
                              const char *keypairs, const char *secretid,
-@@ -1267,111 +1261,6 @@ static ImageInfoSpecific *qemu_rbd_get_specific_info(BlockDriverState *bs,
+@@ -1456,111 +1450,6 @@ static ImageInfoSpecific *qemu_rbd_get_specific_info(BlockDriverState *bs,
      return spec_info;
  }
  
@@ -148,10 +148,10 @@ index a4b8fb482c..3393b06a4e 100644
 -    return status;
 -}
 -
- static int64_t qemu_rbd_getlength(BlockDriverState *bs)
+ static int64_t coroutine_fn qemu_rbd_co_getlength(BlockDriverState *bs)
  {
      BDRVRBDState *s = bs->opaque;
-@@ -1607,7 +1496,6 @@ static BlockDriver bdrv_rbd = {
+@@ -1796,7 +1685,6 @@ static BlockDriver bdrv_rbd = {
  #ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
      .bdrv_co_pwrite_zeroes  = qemu_rbd_co_pwrite_zeroes,
  #endif

debian/patches/pve/0043-PBS-add-master-key-support.patch

@@ -1,98 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 10 Feb 2021 11:07:06 +0100
-Subject: [PATCH] PBS: add master key support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-this requires a new enough libproxmox-backup-qemu0, and allows querying
-from the PVE side to avoid QMP calls with unsupported parameters.
-
-Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- block/monitor/block-hmp-cmds.c | 1 +
- pve-backup.c                   | 3 +++
- qapi/block-core.json           | 7 +++++++
- 3 files changed, 11 insertions(+)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index c9849a5b29..52ddbf95ad 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1039,6 +1039,7 @@ void coroutine_fn hmp_backup(Monitor *mon, const QDict *qdict)
-         false, NULL, // PBS password
-         false, NULL, // PBS keyfile
-         false, NULL, // PBS key_password
-+        false, NULL, // PBS master_keyfile
-         false, NULL, // PBS fingerprint
-         false, NULL, // PBS backup-id
-         false, 0, // PBS backup-time
-diff --git a/pve-backup.c b/pve-backup.c
-index 323014744c..9f6c04a512 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -533,6 +533,7 @@ UuidInfo coroutine_fn *qmp_backup(
-     bool has_password, const char *password,
-     bool has_keyfile, const char *keyfile,
-     bool has_key_password, const char *key_password,
-+    bool has_master_keyfile, const char *master_keyfile,
-     bool has_fingerprint, const char *fingerprint,
-     bool has_backup_id, const char *backup_id,
-     bool has_backup_time, int64_t backup_time,
-@@ -681,6 +682,7 @@ UuidInfo coroutine_fn *qmp_backup(
-             has_password ? password : NULL,
-             has_keyfile ? keyfile : NULL,
-             has_key_password ? key_password : NULL,
-+            has_master_keyfile ? master_keyfile : NULL,
-             has_compress ? compress : true,
-             has_encrypt ? encrypt : has_keyfile,
-             has_fingerprint ? fingerprint : NULL,
-@@ -1044,5 +1046,6 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
-     ret->pbs_dirty_bitmap_savevm = true;
-     ret->pbs_dirty_bitmap_migration = true;
-     ret->query_bitmap_info = true;
-+    ret->pbs_masterkey = true;
-     return ret;
- }
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 829dc7b8e9..d089328a1f 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -817,6 +817,8 @@
- #
- # @key-password: password for keyfile (optional for format 'pbs')
- #
-+# @master-keyfile: PEM-formatted master public keyfile (optional for format 'pbs')
-+#
- # @fingerprint: server cert fingerprint (optional for format 'pbs')
- #
- # @backup-id: backup ID (required for format 'pbs')
-@@ -836,6 +838,7 @@
-                                     '*password': 'str',
-                                     '*keyfile': 'str',
-                                     '*key-password': 'str',
-+                                    '*master-keyfile': 'str',
-                                     '*fingerprint': 'str',
-                                     '*backup-id': 'str',
-                                     '*backup-time': 'int',
-@@ -888,6 +891,9 @@
- #                              migration cap if this is false/unset may lead
- #                              to crashes on migration!
- #
-+# @pbs-masterkey: True if the QMP backup call supports the 'master_keyfile'
-+#                 parameter.
-+#
- # @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
- #
- ##
-@@ -896,6 +902,7 @@
-             'query-bitmap-info': 'bool',
-             'pbs-dirty-bitmap-savevm': 'bool',
-             'pbs-dirty-bitmap-migration': 'bool',
-+            'pbs-masterkey': 'bool',
-             'pbs-library-version': 'str' } }
- 
- ##

debian/patches/pve/0043-alloc-track-fix-deadlock-during-drop.patch

@@ -0,0 +1,153 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 6 Apr 2023 14:59:31 +0200
+Subject: [PATCH] alloc-track: fix deadlock during drop
+
+by replacing the block node directly after changing the backing file
+instead of rescheduling it.
+
+With changes in QEMU 8.0, calling bdrv_get_info (and bdrv_unref)
+during drop can lead to a deadlock when using iothread (only triggered
+with multiple disks, except during debugging where it also triggered
+with one disk sometimes):
+1. job_unref_locked acquires the AioContext and calls job->driver->free
+2. track_drop gets scheduled
+3. bdrv_graph_wrlock is called and polls which leads to track_drop being
+   called
+4. track_drop acquires the AioContext recursively
+5. bdrv_get_info is a wrapped coroutine (since 8.0) and thus polls for
+   bdrv_co_get_info. This releases the AioContext, but only once! The
+   documentation for the AIO_WAIT_WHILE macro states that the
+   AioContext lock needs to be acquired exactly once, but there does
+   not seem to be a way for track_drop to know if it acquired the lock
+   recursively or not (without adding further hacks).
+6. Because the AioContext is still held by the main thread once, it can't
+   be acquired before entering bdrv_co_get_info in co_schedule_bh_cb
+   which happens in the iothread
+
+When doing the operation in change_backing_file, the AioContext has
+already been acquired by the caller, so the issue with the recursive
+lock goes away.
+
+The comment explaining why delaying the replace is necessary is
+> we need to schedule this for later however, since when this function
+> is called, the blockjob modifying us is probably not done yet and
+> has a blocker on 'bs'
+
+However, there is no check for blockers in bdrv_replace_node. It would
+need to be done by us, the caller, with check_to_replace_node.
+Furthermore, the mirror job also does its call to bdrv_replace_node
+while there is an active blocker (inserted by mirror itself) and they
+use a specialized version to check for blockers instead of
+check_to_replace_node there. Alloc-track could also do something
+similar to check for other blockers, but it should be fine to rely on
+Proxmox VE that no other operation with the blockdev is going on.
+
+Mirror also drains the target before replacing the node, but the
+target can have other users. In case of alloc-track the file child
+should not be accessible by anybody else and so there can't be an
+in-flight operation for the file child when alloc-track is drained.
+
+The rescheduling based on refcounting is a hack and it doesn't seem to
+be necessary anymore. It's not clear what the original issue from the
+comment was. Testing with older builds with track_drop done directly
+without rescheduling also didn't lead to any noticable issue for me.
+
+One issue it might have been is the one fixed by b1e1af394d
+("block/stream: Drain subtree around graph change"), where
+block-stream had a use-after-free if the base node changed at an
+inconvenient time (which alloc-track's auto-drop does).
+
+It's also not possible to just not auto-replace the alloc-track. Not
+replacing it at all leads to other operations like block resize
+hanging, and there is no good way to replace it manually via QMP
+(there is x-blockdev-change, but it is experimental and doesn't
+implement the required operation yet). Also, it's just cleaner in
+general to not leave unnecessary block nodes lying around.
+
+Suggested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ block/alloc-track.c | 54 ++++++++++++++-------------------------------
+ 1 file changed, 16 insertions(+), 38 deletions(-)
+
+diff --git a/block/alloc-track.c b/block/alloc-track.c
+index b75d7c6460..76da140a68 100644
+--- a/block/alloc-track.c
++++ b/block/alloc-track.c
+@@ -25,7 +25,6 @@
+ 
+ typedef enum DropState {
+     DropNone,
+-    DropRequested,
+     DropInProgress,
+ } DropState;
+ 
+@@ -268,37 +267,6 @@ static void track_child_perm(BlockDriverState *bs, BdrvChild *c,
+     }
+ }
+ 
+-static void track_drop(void *opaque)
+-{
+-    BlockDriverState *bs = (BlockDriverState*)opaque;
+-    BlockDriverState *file = bs->file->bs;
+-    BDRVAllocTrackState *s = bs->opaque;
+-
+-    assert(file);
+-
+-    /* we rely on the fact that we're not used anywhere else, so let's wait
+-     * until we're only used once - in the drive connected to the guest (and one
+-     * ref is held by bdrv_ref in track_change_backing_file) */
+-    if (bs->refcnt > 2) {
+-        aio_bh_schedule_oneshot(qemu_get_aio_context(), track_drop, opaque);
+-        return;
+-    }
+-    AioContext *aio_context = bdrv_get_aio_context(bs);
+-    aio_context_acquire(aio_context);
+-
+-    bdrv_drained_begin(bs);
+-
+-    /* now that we're drained, we can safely set 'DropInProgress' */
+-    s->drop_state = DropInProgress;
+-    bdrv_child_refresh_perms(bs, bs->file, &error_abort);
+-
+-    bdrv_replace_node(bs, file, &error_abort);
+-    bdrv_set_backing_hd(bs, NULL, &error_abort);
+-    bdrv_drained_end(bs);
+-    bdrv_unref(bs);
+-    aio_context_release(aio_context);
+-}
+-
+ static int track_change_backing_file(BlockDriverState *bs,
+                                      const char *backing_file,
+                                      const char *backing_fmt)
+@@ -308,13 +276,23 @@ static int track_change_backing_file(BlockDriverState *bs,
+         backing_file == NULL && backing_fmt == NULL)
+     {
+         /* backing file has been disconnected, there's no longer any use for
+-         * this node, so let's remove ourselves from the block graph - we need
+-         * to schedule this for later however, since when this function is
+-         * called, the blockjob modifying us is probably not done yet and has a
+-         * blocker on 'bs' */
+-        s->drop_state = DropRequested;
++         * this node, so let's remove ourselves from the block graph */
++        BlockDriverState *file = bs->file->bs;
++
++        /* Just to be sure, because bdrv_replace_node unrefs it */
+         bdrv_ref(bs);
+-        aio_bh_schedule_oneshot(qemu_get_aio_context(), track_drop, (void*)bs);
++        bdrv_drained_begin(bs);
++
++        /* now that we're drained, we can safely set 'DropInProgress' */
++        s->drop_state = DropInProgress;
++
++        bdrv_child_refresh_perms(bs, bs->file, &error_abort);
++
++        bdrv_replace_node(bs, file, &error_abort);
++        bdrv_set_backing_hd(bs, NULL, &error_abort);
++
++        bdrv_drained_end(bs);
++        bdrv_unref(bs);
+     }
+ 
+     return 0;

debian/patches/pve/0044-PVE-block-pbs-fast-path-reads-without-allocation-if-.patch

@@ -1,53 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 9 Dec 2020 11:46:57 +0100
-Subject: [PATCH] PVE: block/pbs: fast-path reads without allocation if
- possible
-
-...and switch over to g_malloc/g_free while at it to align with other
-QEMU code.
-
-Tracing shows the fast-path is taken almost all the time, though not
-100% so the slow one is still necessary.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- block/pbs.c | 17 ++++++++++++++---
- 1 file changed, 14 insertions(+), 3 deletions(-)
-
-diff --git a/block/pbs.c b/block/pbs.c
-index 0b05ea9080..c5eb4d5bad 100644
---- a/block/pbs.c
-+++ b/block/pbs.c
-@@ -200,7 +200,16 @@ static coroutine_fn int pbs_co_preadv(BlockDriverState *bs,
-     BDRVPBSState *s = bs->opaque;
-     int ret;
-     char *pbs_error = NULL;
--    uint8_t *buf = malloc(bytes);
-+    uint8_t *buf;
-+    bool inline_buf = true;
-+
-+    /* for single-buffer IO vectors we can fast-path the write directly to it */
-+    if (qiov->niov == 1 && qiov->iov->iov_len >= bytes) {
-+        buf = qiov->iov->iov_base;
-+    } else {
-+        inline_buf = false;
-+        buf = g_malloc(bytes);
-+    }
- 
-     if (offset < 0 || bytes < 0) {
-         fprintf(stderr, "unexpected negative 'offset' or 'bytes' value!\n");
-@@ -223,8 +232,10 @@ static coroutine_fn int pbs_co_preadv(BlockDriverState *bs,
-         return -EIO;
-     }
- 
--    qemu_iovec_from_buf(qiov, 0, buf, bytes);
--    free(buf);
-+    if (!inline_buf) {
-+        qemu_iovec_from_buf(qiov, 0, buf, bytes);
-+        g_free(buf);
-+    }
- 
-     return ret;
- }

debian/patches/pve/0044-migration-for-snapshots-hold-the-BQL-during-setup-ca.patch

@@ -0,0 +1,190 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Fri, 5 May 2023 13:39:53 +0200
+Subject: [PATCH] migration: for snapshots, hold the BQL during setup callbacks
+
+In spirit, this is a partial revert of commit 9b09503752 ("migration:
+run setup callbacks out of big lock"), but only for the snapshot case.
+
+For snapshots, the bdrv_writev_vmstate() function is used during setup
+(in QIOChannelBlock backing the QEMUFile), but not holding the BQL
+while calling it could lead to an assertion failure. To understand
+how, first note the following:
+
+1. Generated coroutine wrappers for block layer functions spawn the
+coroutine and use AIO_WAIT_WHILE()/aio_poll() to wait for it.
+2. If the host OS switches threads at an inconvenient time, it can
+happen that a bottom half scheduled for the main thread's AioContext
+is executed as part of a vCPU thread's aio_poll().
+
+An example leading to the assertion failure is as follows:
+
+main thread:
+1. A snapshot-save QMP command gets issued.
+2. snapshot_save_job_bh() is scheduled.
+
+vCPU thread:
+3. aio_poll() for the main thread's AioContext is called (e.g. when
+the guest writes to a pflash device, as part of blk_pwrite which is a
+generated coroutine wrapper).
+4. snapshot_save_job_bh() is executed as part of aio_poll().
+3. qemu_savevm_state() is called.
+4. qemu_mutex_unlock_iothread() is called. Now
+qemu_get_current_aio_context() returns 0x0.
+5. bdrv_writev_vmstate() is executed during the usual savevm setup.
+But this function is a generated coroutine wrapper, so it uses
+AIO_WAIT_WHILE. There, the assertion
+assert(qemu_get_current_aio_context() == qemu_get_aio_context());
+will fail.
+
+To fix it, ensure that the BQL is held during setup. To avoid changing
+the behavior for migration too, introduce conditionals for the setup
+callbacks that need the BQL and only take the lock if it's not already
+held.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ include/migration/register.h   |  2 +-
+ migration/block-dirty-bitmap.c | 15 ++++++++++++---
+ migration/block.c              | 15 ++++++++++++---
+ migration/ram.c                | 16 +++++++++++++---
+ migration/savevm.c             |  2 --
+ 5 files changed, 38 insertions(+), 12 deletions(-)
+
+diff --git a/include/migration/register.h b/include/migration/register.h
+index a8dfd8fefd..fa9b0b0f10 100644
+--- a/include/migration/register.h
++++ b/include/migration/register.h
+@@ -43,9 +43,9 @@ typedef struct SaveVMHandlers {
+      * by other locks.
+      */
+     int (*save_live_iterate)(QEMUFile *f, void *opaque);
++    int (*save_setup)(QEMUFile *f, void *opaque);
+ 
+     /* This runs outside the iothread lock!  */
+-    int (*save_setup)(QEMUFile *f, void *opaque);
+     /* Note for save_live_pending:
+      * must_precopy:
+      * - must be migrated in precopy or in stopped state
+diff --git a/migration/block-dirty-bitmap.c b/migration/block-dirty-bitmap.c
+index a6440929fa..69fab3275c 100644
+--- a/migration/block-dirty-bitmap.c
++++ b/migration/block-dirty-bitmap.c
+@@ -1214,10 +1214,17 @@ static int dirty_bitmap_save_setup(QEMUFile *f, void *opaque)
+ {
+     DBMSaveState *s = &((DBMState *)opaque)->save;
+     SaveBitmapState *dbms = NULL;
++    bool release_lock = false;
+ 
+-    qemu_mutex_lock_iothread();
++    /* For snapshots, the BQL is held during setup. */
++    if (!qemu_mutex_iothread_locked()) {
++        qemu_mutex_lock_iothread();
++        release_lock = true;
++    }
+     if (init_dirty_bitmap_migration(s) < 0) {
+-        qemu_mutex_unlock_iothread();
++        if (release_lock) {
++            qemu_mutex_unlock_iothread();
++        }
+         return -1;
+     }
+ 
+@@ -1225,7 +1232,9 @@ static int dirty_bitmap_save_setup(QEMUFile *f, void *opaque)
+         send_bitmap_start(f, s, dbms);
+     }
+     qemu_put_bitmap_flags(f, DIRTY_BITMAP_MIG_FLAG_EOS);
+-    qemu_mutex_unlock_iothread();
++    if (release_lock) {
++        qemu_mutex_unlock_iothread();
++    }
+     return 0;
+ }
+ 
+diff --git a/migration/block.c b/migration/block.c
+index b2497bbd32..c9d55be642 100644
+--- a/migration/block.c
++++ b/migration/block.c
+@@ -716,21 +716,30 @@ static void block_migration_cleanup(void *opaque)
+ static int block_save_setup(QEMUFile *f, void *opaque)
+ {
+     int ret;
++    bool release_lock = false;
+ 
+     trace_migration_block_save("setup", block_mig_state.submitted,
+                                block_mig_state.transferred);
+ 
+-    qemu_mutex_lock_iothread();
++    /* For snapshots, the BQL is held during setup. */
++    if (!qemu_mutex_iothread_locked()) {
++        qemu_mutex_lock_iothread();
++        release_lock = true;
++    }
+     ret = init_blk_migration(f);
+     if (ret < 0) {
+-        qemu_mutex_unlock_iothread();
++        if (release_lock) {
++            qemu_mutex_unlock_iothread();
++        }
+         return ret;
+     }
+ 
+     /* start track dirty blocks */
+     ret = set_dirty_tracking();
+ 
+-    qemu_mutex_unlock_iothread();
++    if (release_lock) {
++        qemu_mutex_unlock_iothread();
++    }
+ 
+     if (ret) {
+         return ret;
+diff --git a/migration/ram.c b/migration/ram.c
+index 79d881f735..0ecbbc3202 100644
+--- a/migration/ram.c
++++ b/migration/ram.c
+@@ -3117,8 +3117,16 @@ static void migration_bitmap_clear_discarded_pages(RAMState *rs)
+ 
+ static void ram_init_bitmaps(RAMState *rs)
+ {
+-    /* For memory_global_dirty_log_start below.  */
+-    qemu_mutex_lock_iothread();
++    bool release_lock = false;
++
++    /*
++     * For memory_global_dirty_log_start below.
++     * For snapshots, the BQL is held during setup.
++     */
++    if (!qemu_mutex_iothread_locked()) {
++        qemu_mutex_lock_iothread();
++        release_lock = true;
++    }
+     qemu_mutex_lock_ramlist();
+ 
+     WITH_RCU_READ_LOCK_GUARD() {
+@@ -3130,7 +3138,9 @@ static void ram_init_bitmaps(RAMState *rs)
+         }
+     }
+     qemu_mutex_unlock_ramlist();
+-    qemu_mutex_unlock_iothread();
++    if (release_lock) {
++        qemu_mutex_unlock_iothread();
++    }
+ 
+     /*
+      * After an eventual first bitmap sync, fixup the initial bitmap
+diff --git a/migration/savevm.c b/migration/savevm.c
+index aa54a67fda..fc6a82a555 100644
+--- a/migration/savevm.c
++++ b/migration/savevm.c
+@@ -1621,10 +1621,8 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
+     memset(&compression_counters, 0, sizeof(compression_counters));
+     ms->to_dst_file = f;
+ 
+-    qemu_mutex_unlock_iothread();
+     qemu_savevm_state_header(f);
+     qemu_savevm_state_setup(f);
+-    qemu_mutex_lock_iothread();
+ 
+     while (qemu_file_get_error(f) == 0) {
+         if (qemu_savevm_state_iterate(f, false) > 0) {

debian/patches/pve/0045-savevm-async-don-t-hold-BQL-during-setup.patch

@@ -0,0 +1,29 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Fri, 5 May 2023 15:30:16 +0200
+Subject: [PATCH] savevm-async: don't hold BQL during setup
+
+See commit "migration: for snapshots, hold the BQL during setup
+callbacks" for why. This is separate, because a version of that one
+will hopefully land upstream.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ migration/savevm-async.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/migration/savevm-async.c b/migration/savevm-async.c
+index ea3b2f36a6..dd7744ab66 100644
+--- a/migration/savevm-async.c
++++ b/migration/savevm-async.c
+@@ -403,10 +403,8 @@ void qmp_savevm_start(const char *statefile, Error **errp)
+     snap_state.state = SAVE_STATE_ACTIVE;
+     snap_state.finalize_bh = qemu_bh_new(process_savevm_finalize, &snap_state);
+     snap_state.co = qemu_coroutine_create(&process_savevm_co, NULL);
+-    qemu_mutex_unlock_iothread();
+     qemu_savevm_state_header(snap_state.file);
+     qemu_savevm_state_setup(snap_state.file);
+-    qemu_mutex_lock_iothread();
+ 
+     /* Async processing from here on out happens in iohandler context, so let
+      * the target bdrv have its home there.

debian/patches/pve/0048-PVE-whitelist-invalid-QAPI-names-for-backwards-compa.patch

@@ -1,33 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 26 May 2021 15:26:30 +0200
-Subject: [PATCH] PVE: whitelist 'invalid' QAPI names for backwards compat
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- qapi/pragma.json | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/qapi/pragma.json b/qapi/pragma.json
-index 7c91ea3685..c3888d654c 100644
---- a/qapi/pragma.json
-+++ b/qapi/pragma.json
-@@ -12,6 +12,7 @@
-         'device_add',
-         'device_del',
-         'expire_password',
-+        'get_link_status',
-         'migrate_cancel',
-         'netdev_add',
-         'netdev_del',
-@@ -60,6 +61,8 @@
-         'SysEmuTarget',             # query-cpu-fast, query-target
-         'UuidInfo',                 # query-uuid
-         'VncClientInfo',            # query-vnc, query-vnc-servers, ...
--        'X86CPURegister32'          # qom-get of x86 CPU properties
-+        'X86CPURegister32',         # qom-get of x86 CPU properties
-                                     # feature-words, filtered-features
-+        'BlockdevOptionsPbs',       # for PBS backwards compat
-+        'BalloonInfo'
-     ] } }

debian/patches/pve/0049-PVE-savevm-async-register-yank-before-migration_inco.patch

@@ -1,35 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 26 May 2021 17:36:55 +0200
-Subject: [PATCH] PVE: savevm-async: register yank before
- migration_incoming_state_destroy
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- migration/savevm-async.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/migration/savevm-async.c b/migration/savevm-async.c
-index 970ee3b3fc..b3ccc069f1 100644
---- a/migration/savevm-async.c
-+++ b/migration/savevm-async.c
-@@ -19,6 +19,7 @@
- #include "qemu/timer.h"
- #include "qemu/main-loop.h"
- #include "qemu/rcu.h"
-+#include "qemu/yank.h"
- 
- /* #define DEBUG_SAVEVM_STATE */
- 
-@@ -580,6 +581,10 @@ int load_snapshot_from_blockdev(const char *filename, Error **errp)
-     dirty_bitmap_mig_before_vm_start();
- 
-     qemu_fclose(f);
-+
-+    /* state_destroy assumes a real migration which would have added a yank */
-+    yank_register_instance(MIGRATION_YANK_INSTANCE, &error_abort);
-+
-     migration_incoming_state_destroy();
-     if (ret < 0) {
-         error_setg_errno(errp, -ret, "Error while loading VM state");

debian/patches/pve/0051-vma-allow-partial-restore.patch

@@ -1,407 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Fabian Ebner <f.ebner@proxmox.com>
-Date: Thu, 21 Apr 2022 13:26:48 +0200
-Subject: [PATCH] vma: allow partial restore
-
-Introduce a new map line for skipping a certain drive, of the form
-skip=drive-scsi0
-
-Since in PVE, most archives are compressed and piped to vma for
-restore, it's not easily possible to skip reads.
-
-For the reader, a new skip flag for VmaRestoreState is added and the
-target is allowed to be NULL if skip is specified when registering. If
-the skip flag is set, no writes will be made as well as no check for
-duplicate clusters. Therefore, the flag is not set for verify.
-
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
-Acked-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- vma-reader.c |  64 ++++++++++++---------
- vma.c        | 157 +++++++++++++++++++++++++++++----------------------
- vma.h        |   2 +-
- 3 files changed, 126 insertions(+), 97 deletions(-)
-
-diff --git a/vma-reader.c b/vma-reader.c
-index 4f4ee2b47b..844d95a5ba 100644
---- a/vma-reader.c
-+++ b/vma-reader.c
-@@ -29,6 +29,7 @@ typedef struct VmaRestoreState {
-     bool write_zeroes;
-     unsigned long *bitmap;
-     int bitmap_size;
-+    bool skip;
- }  VmaRestoreState;
- 
- struct VmaReader {
-@@ -426,13 +427,14 @@ VmaDeviceInfo *vma_reader_get_device_info(VmaReader *vmar, guint8 dev_id)
- }
- 
- static void allocate_rstate(VmaReader *vmar,  guint8 dev_id,
--                            BlockBackend *target, bool write_zeroes)
-+                            BlockBackend *target, bool write_zeroes, bool skip)
- {
-     assert(vmar);
-     assert(dev_id);
- 
-     vmar->rstate[dev_id].target = target;
-     vmar->rstate[dev_id].write_zeroes = write_zeroes;
-+    vmar->rstate[dev_id].skip = skip;
- 
-     int64_t size = vmar->devinfo[dev_id].size;
- 
-@@ -447,28 +449,30 @@ static void allocate_rstate(VmaReader *vmar,  guint8 dev_id,
- }
- 
- int vma_reader_register_bs(VmaReader *vmar, guint8 dev_id, BlockBackend *target,
--                           bool write_zeroes, Error **errp)
-+                           bool write_zeroes, bool skip, Error **errp)
- {
-     assert(vmar);
--    assert(target != NULL);
-+    assert(target != NULL || skip);
-     assert(dev_id);
--    assert(vmar->rstate[dev_id].target == NULL);
--
--    int64_t size = blk_getlength(target);
--    int64_t size_diff = size - vmar->devinfo[dev_id].size;
--
--    /* storage types can have different size restrictions, so it
--     * is not always possible to create an image with exact size.
--     * So we tolerate a size difference up to 4MB.
--     */
--    if ((size_diff < 0) || (size_diff > 4*1024*1024)) {
--        error_setg(errp, "vma_reader_register_bs for stream %s failed - "
--                   "unexpected size %zd != %zd", vmar->devinfo[dev_id].devname,
--                   size, vmar->devinfo[dev_id].size);
--        return -1;
-+    assert(vmar->rstate[dev_id].target == NULL && !vmar->rstate[dev_id].skip);
-+
-+    if (target != NULL) {
-+        int64_t size = blk_getlength(target);
-+        int64_t size_diff = size - vmar->devinfo[dev_id].size;
-+
-+        /* storage types can have different size restrictions, so it
-+         * is not always possible to create an image with exact size.
-+         * So we tolerate a size difference up to 4MB.
-+         */
-+        if ((size_diff < 0) || (size_diff > 4*1024*1024)) {
-+            error_setg(errp, "vma_reader_register_bs for stream %s failed - "
-+                       "unexpected size %zd != %zd", vmar->devinfo[dev_id].devname,
-+                       size, vmar->devinfo[dev_id].size);
-+            return -1;
-+        }
-     }
- 
--    allocate_rstate(vmar, dev_id, target, write_zeroes);
-+    allocate_rstate(vmar, dev_id, target, write_zeroes, skip);
- 
-     return 0;
- }
-@@ -561,19 +565,23 @@ static int restore_extent(VmaReader *vmar, unsigned char *buf,
-         VmaRestoreState *rstate = &vmar->rstate[dev_id];
-         BlockBackend *target = NULL;
- 
-+        bool skip = rstate->skip;
-+
-         if (dev_id != vmar->vmstate_stream) {
-             target = rstate->target;
--            if (!verify && !target) {
-+            if (!verify && !target && !skip) {
-                 error_setg(errp, "got wrong dev id %d", dev_id);
-                 return -1;
-             }
- 
--            if (vma_reader_get_bitmap(rstate, cluster_num)) {
--                error_setg(errp, "found duplicated cluster %zd for stream %s",
--                          cluster_num, vmar->devinfo[dev_id].devname);
--                return -1;
-+            if (!skip) {
-+                if (vma_reader_get_bitmap(rstate, cluster_num)) {
-+                    error_setg(errp, "found duplicated cluster %zd for stream %s",
-+                              cluster_num, vmar->devinfo[dev_id].devname);
-+                    return -1;
-+                }
-+                vma_reader_set_bitmap(rstate, cluster_num, 1);
-             }
--            vma_reader_set_bitmap(rstate, cluster_num, 1);
- 
-             max_sector = vmar->devinfo[dev_id].size/BDRV_SECTOR_SIZE;
-         } else {
-@@ -619,7 +627,7 @@ static int restore_extent(VmaReader *vmar, unsigned char *buf,
-                 return -1;
-             }
- 
--            if (!verify) {
-+            if (!verify && !skip) {
-                 int nb_sectors = end_sector - sector_num;
-                 if (restore_write_data(vmar, dev_id, target, vmstate_fd,
-                                        buf + start, sector_num, nb_sectors,
-@@ -655,7 +663,7 @@ static int restore_extent(VmaReader *vmar, unsigned char *buf,
-                         return -1;
-                     }
- 
--                    if (!verify) {
-+                    if (!verify && !skip) {
-                         int nb_sectors = end_sector - sector_num;
-                         if (restore_write_data(vmar, dev_id, target, vmstate_fd,
-                                                buf + start, sector_num,
-@@ -680,7 +688,7 @@ static int restore_extent(VmaReader *vmar, unsigned char *buf,
-                             vmar->partial_zero_cluster_data += zero_size;
-                         }
- 
--                        if (rstate->write_zeroes && !verify) {
-+                        if (rstate->write_zeroes && !verify && !skip) {
-                             if (restore_write_data(vmar, dev_id, target, vmstate_fd,
-                                                    zero_vma_block, sector_num,
-                                                    nb_sectors, errp) < 0) {
-@@ -851,7 +859,7 @@ int vma_reader_verify(VmaReader *vmar, bool verbose, Error **errp)
- 
-     for (dev_id = 1; dev_id < 255; dev_id++) {
-         if (vma_reader_get_device_info(vmar, dev_id)) {
--            allocate_rstate(vmar, dev_id, NULL, false);
-+            allocate_rstate(vmar, dev_id, NULL, false, false);
-         }
-     }
- 
-diff --git a/vma.c b/vma.c
-index 89440733b1..21e765a469 100644
---- a/vma.c
-+++ b/vma.c
-@@ -138,6 +138,7 @@ typedef struct RestoreMap {
-     char *throttling_group;
-     char *cache;
-     bool write_zero;
-+    bool skip;
- } RestoreMap;
- 
- static bool try_parse_option(char **line, const char *optname, char **out, const char *inbuf) {
-@@ -245,47 +246,61 @@ static int extract_content(int argc, char **argv)
-             char *bps = NULL;
-             char *group = NULL;
-             char *cache = NULL;
-+            char *devname = NULL;
-+            bool skip = false;
-+            uint64_t bps_value = 0;
-+            const char *path = NULL;
-+            bool write_zero = true;
-+
-             if (!line || line[0] == '\0' || !strcmp(line, "done\n")) {
-                 break;
-             }
-             int len = strlen(line);
-             if (line[len - 1] == '\n') {
-                 line[len - 1] = '\0';
--                if (len == 1) {
-+                len = len - 1;
-+                if (len == 0) {
-                     break;
-                 }
-             }
- 
--            while (1) {
--                if (!try_parse_option(&line, "format", &format, inbuf) &&
--                    !try_parse_option(&line, "throttling.bps", &bps, inbuf) &&
--                    !try_parse_option(&line, "throttling.group", &group, inbuf) &&
--                    !try_parse_option(&line, "cache", &cache, inbuf))
--                {
--                    break;
-+            if (strncmp(line, "skip", 4) == 0) {
-+                if (len < 6 || line[4] != '=') {
-+                    g_error("read map failed - option 'skip' has no value ('%s')",
-+                            inbuf);
-+                } else {
-+                    devname = line + 5;
-+                    skip = true;
-+                }
-+            } else {
-+                while (1) {
-+                    if (!try_parse_option(&line, "format", &format, inbuf) &&
-+                        !try_parse_option(&line, "throttling.bps", &bps, inbuf) &&
-+                        !try_parse_option(&line, "throttling.group", &group, inbuf) &&
-+                        !try_parse_option(&line, "cache", &cache, inbuf))
-+                    {
-+                        break;
-+                    }
-                 }
--            }
- 
--            uint64_t bps_value = 0;
--            if (bps) {
--                bps_value = verify_u64(bps);
--                g_free(bps);
--            }
-+                if (bps) {
-+                    bps_value = verify_u64(bps);
-+                    g_free(bps);
-+                }
- 
--            const char *path;
--            bool write_zero;
--            if (line[0] == '0' && line[1] == ':') {
--                path = line + 2;
--                write_zero = false;
--            } else if (line[0] == '1' && line[1] == ':') {
--                path = line + 2;
--                write_zero = true;
--            } else {
--                g_error("read map failed - parse error ('%s')", inbuf);
-+                if (line[0] == '0' && line[1] == ':') {
-+                    path = line + 2;
-+                    write_zero = false;
-+                } else if (line[0] == '1' && line[1] == ':') {
-+                    path = line + 2;
-+                    write_zero = true;
-+                } else {
-+                    g_error("read map failed - parse error ('%s')", inbuf);
-+                }
-+
-+                path = extract_devname(path, &devname, -1);
-             }
- 
--            char *devname = NULL;
--            path = extract_devname(path, &devname, -1);
-             if (!devname) {
-                 g_error("read map failed - no dev name specified ('%s')",
-                         inbuf);
-@@ -299,6 +314,7 @@ static int extract_content(int argc, char **argv)
-             map->throttling_group = group;
-             map->cache = cache;
-             map->write_zero = write_zero;
-+            map->skip = skip;
- 
-             g_hash_table_insert(devmap, map->devname, map);
- 
-@@ -328,6 +344,7 @@ static int extract_content(int argc, char **argv)
-             const char *cache = NULL;
-             int flags = BDRV_O_RDWR;
-             bool write_zero = true;
-+            bool skip = false;
- 
-             BlockBackend *blk = NULL;
- 
-@@ -343,6 +360,7 @@ static int extract_content(int argc, char **argv)
-                 throttling_group = map->throttling_group;
-                 cache = map->cache;
-                 write_zero = map->write_zero;
-+                skip = map->skip;
-             } else {
-                 devfn = g_strdup_printf("%s/tmp-disk-%s.raw",
-                                         dirname, di->devname);
-@@ -361,57 +379,60 @@ static int extract_content(int argc, char **argv)
-                 write_zero = false;
-             }
- 
--	    size_t devlen = strlen(devfn);
--	    QDict *options = NULL;
--            bool writethrough;
--            if (format) {
--                /* explicit format from commandline */
--                options = qdict_new();
--                qdict_put_str(options, "driver", format);
--            } else if ((devlen > 4 && strcmp(devfn+devlen-4, ".raw") == 0) ||
--	               strncmp(devfn, "/dev/", 5) == 0)
--	    {
--                /* This part is now deprecated for PVE as well (just as qemu
--                 * deprecated not specifying an explicit raw format, too.
--                 */
--		/* explicit raw format */
--		options = qdict_new();
--		qdict_put_str(options, "driver", "raw");
--	    }
--            if (cache && bdrv_parse_cache_mode(cache, &flags, &writethrough)) {
--                g_error("invalid cache option: %s\n", cache);
--            }
-+            if (!skip) {
-+                size_t devlen = strlen(devfn);
-+                QDict *options = NULL;
-+                bool writethrough;
-+                if (format) {
-+                    /* explicit format from commandline */
-+                    options = qdict_new();
-+                    qdict_put_str(options, "driver", format);
-+                } else if ((devlen > 4 && strcmp(devfn+devlen-4, ".raw") == 0) ||
-+                    strncmp(devfn, "/dev/", 5) == 0)
-+                {
-+                    /* This part is now deprecated for PVE as well (just as qemu
-+                     * deprecated not specifying an explicit raw format, too.
-+                     */
-+                    /* explicit raw format */
-+                    options = qdict_new();
-+                    qdict_put_str(options, "driver", "raw");
-+                }
- 
--	    if (errp || !(blk = blk_new_open(devfn, NULL, options, flags, &errp))) {
--                g_error("can't open file %s - %s", devfn,
--                        error_get_pretty(errp));
--            }
-+                if (cache && bdrv_parse_cache_mode(cache, &flags, &writethrough)) {
-+                    g_error("invalid cache option: %s\n", cache);
-+                }
- 
--            if (cache) {
--                blk_set_enable_write_cache(blk, !writethrough);
--            }
-+                if (errp || !(blk = blk_new_open(devfn, NULL, options, flags, &errp))) {
-+                    g_error("can't open file %s - %s", devfn,
-+                            error_get_pretty(errp));
-+                }
- 
--            if (throttling_group) {
--                blk_io_limits_enable(blk, throttling_group);
--            }
-+                if (cache) {
-+                    blk_set_enable_write_cache(blk, !writethrough);
-+                }
- 
--            if (throttling_bps) {
--                if (!throttling_group) {
--                    blk_io_limits_enable(blk, devfn);
-+                if (throttling_group) {
-+                    blk_io_limits_enable(blk, throttling_group);
-                 }
- 
--                ThrottleConfig cfg;
--                throttle_config_init(&cfg);
--                cfg.buckets[THROTTLE_BPS_WRITE].avg = throttling_bps;
--                Error *err = NULL;
--                if (!throttle_is_valid(&cfg, &err)) {
--                    error_report_err(err);
--                    g_error("failed to apply throttling");
-+                if (throttling_bps) {
-+                    if (!throttling_group) {
-+                        blk_io_limits_enable(blk, devfn);
-+                    }
-+
-+                    ThrottleConfig cfg;
-+                    throttle_config_init(&cfg);
-+                    cfg.buckets[THROTTLE_BPS_WRITE].avg = throttling_bps;
-+                    Error *err = NULL;
-+                    if (!throttle_is_valid(&cfg, &err)) {
-+                        error_report_err(err);
-+                        g_error("failed to apply throttling");
-+                    }
-+                    blk_set_io_limits(blk, &cfg);
-                 }
--                blk_set_io_limits(blk, &cfg);
-             }
- 
--            if (vma_reader_register_bs(vmar, i, blk, write_zero, &errp) < 0) {
-+            if (vma_reader_register_bs(vmar, i, blk, write_zero, skip, &errp) < 0) {
-                 g_error("%s", error_get_pretty(errp));
-             }
- 
-diff --git a/vma.h b/vma.h
-index c895c97f6d..1b62859165 100644
---- a/vma.h
-+++ b/vma.h
-@@ -142,7 +142,7 @@ GList *vma_reader_get_config_data(VmaReader *vmar);
- VmaDeviceInfo *vma_reader_get_device_info(VmaReader *vmar, guint8 dev_id);
- int vma_reader_register_bs(VmaReader *vmar, guint8 dev_id,
-                            BlockBackend *target, bool write_zeroes,
--                           Error **errp);
-+                           bool skip, Error **errp);
- int vma_reader_restore(VmaReader *vmar, int vmstate_fd, bool verbose,
-                        Error **errp);
- int vma_reader_verify(VmaReader *vmar, bool verbose, Error **errp);

debian/patches/pve/0052-pbs-namespace-support.patch

@@ -1,233 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Wolfgang Bumiller <w.bumiller@proxmox.com>
-Date: Tue, 26 Apr 2022 16:06:28 +0200
-Subject: [PATCH] pbs: namespace support
-
-Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
----
- block/monitor/block-hmp-cmds.c |  1 +
- block/pbs.c                    | 25 +++++++++++++++++++++----
- pbs-restore.c                  | 19 ++++++++++++++++---
- pve-backup.c                   |  6 +++++-
- qapi/block-core.json           |  5 ++++-
- 5 files changed, 47 insertions(+), 9 deletions(-)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index 52ddbf95ad..69c868887a 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1041,6 +1041,7 @@ void coroutine_fn hmp_backup(Monitor *mon, const QDict *qdict)
-         false, NULL, // PBS key_password
-         false, NULL, // PBS master_keyfile
-         false, NULL, // PBS fingerprint
-+        false, NULL, // PBS backup-ns
-         false, NULL, // PBS backup-id
-         false, 0, // PBS backup-time
-         false, false, // PBS use-dirty-bitmap
-diff --git a/block/pbs.c b/block/pbs.c
-index c5eb4d5bad..7471e2ef9d 100644
---- a/block/pbs.c
-+++ b/block/pbs.c
-@@ -14,6 +14,7 @@
- #include <proxmox-backup-qemu.h>
- 
- #define PBS_OPT_REPOSITORY "repository"
-+#define PBS_OPT_NAMESPACE "namespace"
- #define PBS_OPT_SNAPSHOT "snapshot"
- #define PBS_OPT_ARCHIVE "archive"
- #define PBS_OPT_KEYFILE "keyfile"
-@@ -27,6 +28,7 @@ typedef struct {
-     int64_t length;
- 
-     char *repository;
-+    char *namespace;
-     char *snapshot;
-     char *archive;
- } BDRVPBSState;
-@@ -40,6 +42,11 @@ static QemuOptsList runtime_opts = {
-             .type = QEMU_OPT_STRING,
-             .help = "The server address and repository to connect to.",
-         },
-+        {
-+            .name = PBS_OPT_NAMESPACE,
-+            .type = QEMU_OPT_STRING,
-+            .help = "Optional: The snapshot's namespace.",
-+        },
-         {
-             .name = PBS_OPT_SNAPSHOT,
-             .type = QEMU_OPT_STRING,
-@@ -76,7 +83,7 @@ static QemuOptsList runtime_opts = {
- 
- 
- // filename format:
--// pbs:repository=<repo>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
-+// pbs:repository=<repo>,namespace=<ns>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
- static void pbs_parse_filename(const char *filename, QDict *options,
-                                      Error **errp)
- {
-@@ -112,6 +119,7 @@ static int pbs_open(BlockDriverState *bs, QDict *options, int flags,
-     s->archive = g_strdup(qemu_opt_get(opts, PBS_OPT_ARCHIVE));
-     const char *keyfile = qemu_opt_get(opts, PBS_OPT_KEYFILE);
-     const char *password = qemu_opt_get(opts, PBS_OPT_PASSWORD);
-+    const char *namespace = qemu_opt_get(opts, PBS_OPT_NAMESPACE);
-     const char *fingerprint = qemu_opt_get(opts, PBS_OPT_FINGERPRINT);
-     const char *key_password = qemu_opt_get(opts, PBS_OPT_ENCRYPTION_PASSWORD);
- 
-@@ -124,9 +132,12 @@ static int pbs_open(BlockDriverState *bs, QDict *options, int flags,
-     if (!key_password) {
-         key_password = getenv("PBS_ENCRYPTION_PASSWORD");
-     }
-+    if (namespace) {
-+        s->namespace = g_strdup(namespace);
-+    }
- 
-     /* connect to PBS server in read mode */
--    s->conn = proxmox_restore_new(s->repository, s->snapshot, password,
-+    s->conn = proxmox_restore_new_ns(s->repository, s->snapshot, s->namespace, password,
-         keyfile, key_password, fingerprint, &pbs_error);
- 
-     /* invalidates qemu_opt_get char pointers from above */
-@@ -171,6 +182,7 @@ static int pbs_file_open(BlockDriverState *bs, QDict *options, int flags,
- static void pbs_close(BlockDriverState *bs) {
-     BDRVPBSState *s = bs->opaque;
-     g_free(s->repository);
-+    g_free(s->namespace);
-     g_free(s->snapshot);
-     g_free(s->archive);
-     proxmox_restore_disconnect(s->conn);
-@@ -252,8 +264,13 @@ static coroutine_fn int pbs_co_pwritev(BlockDriverState *bs,
- static void pbs_refresh_filename(BlockDriverState *bs)
- {
-     BDRVPBSState *s = bs->opaque;
--    snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
--             s->repository, s->snapshot, s->archive);
-+    if (s->namespace) {
-+        snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s:%s(%s)",
-+                 s->repository, s->namespace, s->snapshot, s->archive);
-+    } else {
-+        snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
-+                 s->repository, s->snapshot, s->archive);
-+    }
- }
- 
- static const char *const pbs_strong_runtime_opts[] = {
-diff --git a/pbs-restore.c b/pbs-restore.c
-index 4d3f925a1b..62042bdd93 100644
---- a/pbs-restore.c
-+++ b/pbs-restore.c
-@@ -30,7 +30,7 @@
- static void help(void)
- {
-     const char *help_msg =
--        "usage: pbs-restore [--repository <repo>] snapshot archive-name target [command options]\n"
-+        "usage: pbs-restore [--repository <repo>] [--ns namespace] snapshot archive-name target [command options]\n"
-         ;
- 
-     printf("%s", help_msg);
-@@ -78,6 +78,7 @@ int main(int argc, char **argv)
-     Error *main_loop_err = NULL;
-     const char *format = "raw";
-     const char *repository = NULL;
-+    const char *backup_ns = NULL;
-     const char *keyfile = NULL;
-     int verbose = false;
-     bool skip_zero = false;
-@@ -91,6 +92,7 @@ int main(int argc, char **argv)
-             {"verbose", no_argument, 0, 'v'},
-             {"format", required_argument, 0, 'f'},
-             {"repository", required_argument, 0, 'r'},
-+            {"ns", required_argument, 0, 'n'},
-             {"keyfile", required_argument, 0, 'k'},
-             {0, 0, 0, 0}
-         };
-@@ -111,6 +113,9 @@ int main(int argc, char **argv)
-             case 'r':
-                 repository = g_strdup(argv[optind - 1]);
-                 break;
-+            case 'n':
-+                backup_ns = g_strdup(argv[optind - 1]);
-+                break;
-             case 'k':
-                 keyfile = g_strdup(argv[optind - 1]);
-                 break;
-@@ -161,8 +166,16 @@ int main(int argc, char **argv)
-         fprintf(stderr, "connecting to repository '%s'\n", repository);
-     }
-     char *pbs_error = NULL;
--    ProxmoxRestoreHandle *conn = proxmox_restore_new(
--        repository, snapshot, password, keyfile, key_password, fingerprint, &pbs_error);
-+    ProxmoxRestoreHandle *conn = proxmox_restore_new_ns(
-+        repository,
-+        snapshot,
-+        backup_ns,
-+        password,
-+        keyfile,
-+        key_password,
-+        fingerprint,
-+        &pbs_error
-+    );
-     if (conn == NULL) {
-         fprintf(stderr, "restore failed: %s\n", pbs_error);
-         return -1;
-diff --git a/pve-backup.c b/pve-backup.c
-index 9f6c04a512..f6a5f8c785 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -10,6 +10,8 @@
- #include "qapi/qmp/qerror.h"
- #include "qemu/cutils.h"
- 
-+#include <proxmox-backup-qemu.h>
-+
- /* PVE backup state and related function */
- 
- /*
-@@ -535,6 +537,7 @@ UuidInfo coroutine_fn *qmp_backup(
-     bool has_key_password, const char *key_password,
-     bool has_master_keyfile, const char *master_keyfile,
-     bool has_fingerprint, const char *fingerprint,
-+    bool has_backup_ns, const char *backup_ns,
-     bool has_backup_id, const char *backup_id,
-     bool has_backup_time, int64_t backup_time,
-     bool has_use_dirty_bitmap, bool use_dirty_bitmap,
-@@ -674,8 +677,9 @@ UuidInfo coroutine_fn *qmp_backup(
-         firewall_name = "fw.conf";
- 
-         char *pbs_err = NULL;
--        pbs = proxmox_backup_new(
-+        pbs = proxmox_backup_new_ns(
-             backup_file,
-+            has_backup_ns ? backup_ns : NULL,
-             backup_id,
-             backup_time,
-             dump_cb_block_size,
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index d089328a1f..705f0c97ba 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -821,6 +821,8 @@
- #
- # @fingerprint: server cert fingerprint (optional for format 'pbs')
- #
-+# @backup-ns: backup namespace (required for format 'pbs')
-+#
- # @backup-id: backup ID (required for format 'pbs')
- #
- # @backup-time: backup timestamp (Unix epoch, required for format 'pbs')
-@@ -840,6 +842,7 @@
-                                     '*key-password': 'str',
-                                     '*master-keyfile': 'str',
-                                     '*fingerprint': 'str',
-+                                    '*backup-ns': 'str',
-                                     '*backup-id': 'str',
-                                     '*backup-time': 'int',
-                                     '*use-dirty-bitmap': 'bool',
-@@ -3236,7 +3239,7 @@
- { 'struct': 'BlockdevOptionsPbs',
-   'data': { 'repository': 'str', 'snapshot': 'str', 'archive': 'str',
-             '*keyfile': 'str', '*password': 'str', '*fingerprint': 'str',
--            '*key_password': 'str' } }
-+            '*key_password': 'str', '*namespace': 'str' } }
- 
- ##
- # @BlockdevOptionsNVMe:

debian/patches/pve/0054-PVE-Backup-create-jobs-correctly-cancel-in-error-sce.patch

@@ -1,59 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Fabian Ebner <f.ebner@proxmox.com>
-Date: Wed, 25 May 2022 13:59:37 +0200
-Subject: [PATCH] PVE-Backup: create jobs: correctly cancel in error scenario
-
-The first call to job_cancel_sync() will cancel and free all jobs in
-the transaction, so ensure that it's called only once and get rid of
-the job_unref() that would operate on freed memory.
-
-It's also necessary to NULL backup_state.pbs in the error scenario,
-because a subsequent backup_cancel QMP call (as happens in PVE when
-the backup QMP command fails) would try to call proxmox_backup_abort()
-and run into a segfault.
-
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
-Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
----
- pve-backup.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/pve-backup.c b/pve-backup.c
-index f6a5f8c785..5bed6f4014 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -506,6 +506,11 @@ static void create_backup_jobs_bh(void *opaque) {
-     }
- 
-     if (*errp) {
-+        /*
-+         * It's enough to cancel one job in the transaction, the rest will
-+         * follow automatically.
-+         */
-+        bool canceled = false;
-         l = backup_state.di_list;
-         while (l) {
-             PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-@@ -516,12 +521,12 @@ static void create_backup_jobs_bh(void *opaque) {
-                 di->target = NULL;
-             }
- 
--            if (di->job) {
-+            if (!canceled && di->job) {
-                 AioContext *ctx = di->job->job.aio_context;
-                 aio_context_acquire(ctx);
-                 job_cancel_sync(&di->job->job, true);
--                job_unref(&di->job->job);
-                 aio_context_release(ctx);
-+                canceled = true;
-             }
-         }
-     }
-@@ -947,6 +952,7 @@ err:
- 
-     if (pbs) {
-         proxmox_backup_disconnect(pbs);
-+        backup_state.pbs = NULL;
-     }
- 
-     if (backup_dir) {

debian/patches/pve/0055-PVE-Backup-ensure-jobs-in-di_list-are-referenced.patch

@@ -1,76 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Fabian Ebner <f.ebner@proxmox.com>
-Date: Wed, 25 May 2022 13:59:38 +0200
-Subject: [PATCH] PVE-Backup: ensure jobs in di_list are referenced
-
-Ensures that qmp_backup_cancel doesn't pick a job that's already been
-freed. With unlucky timings it seems possible that:
-1. job_exit -> job_completed -> job_finalize_single starts
-2. pvebackup_co_complete_stream gets spawned in completion callback
-3. job finalize_single finishes -> job's refcount hits zero -> job is
-   freed
-4. qmp_backup_cancel comes in and locks backup_state.backup_mutex
-   before pvebackup_co_complete_stream can remove the job from the
-   di_list
-5. qmp_backup_cancel will pick a job that's already been freed
-
-Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
-Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
----
- pve-backup.c | 25 ++++++++++++++++++++-----
- 1 file changed, 20 insertions(+), 5 deletions(-)
-
-diff --git a/pve-backup.c b/pve-backup.c
-index 5bed6f4014..0c34428713 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -316,6 +316,14 @@ static void coroutine_fn pvebackup_co_complete_stream(void *opaque)
-         }
-     }
- 
-+    if (di->job) {
-+        AioContext *ctx = di->job->job.aio_context;
-+        aio_context_acquire(ctx);
-+        job_unref(&di->job->job);
-+        di->job = NULL;
-+        aio_context_release(ctx);
-+    }
-+
-     // remove self from job list
-     backup_state.di_list = g_list_remove(backup_state.di_list, di);
- 
-@@ -491,9 +499,12 @@ static void create_backup_jobs_bh(void *opaque) {
-             bitmap_mode, false, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
-             JOB_DEFAULT, pvebackup_complete_cb, di, backup_state.txn, &local_err);
- 
--        aio_context_release(aio_context);
--
-         di->job = job;
-+        if (job) {
-+            job_ref(&job->job);
-+        }
-+
-+        aio_context_release(aio_context);
- 
-         if (!job || local_err) {
-             error_setg(errp, "backup_job_create failed: %s",
-@@ -521,12 +532,16 @@ static void create_backup_jobs_bh(void *opaque) {
-                 di->target = NULL;
-             }
- 
--            if (!canceled && di->job) {
-+            if (di->job) {
-                 AioContext *ctx = di->job->job.aio_context;
-                 aio_context_acquire(ctx);
--                job_cancel_sync(&di->job->job, true);
-+                if (!canceled) {
-+                    job_cancel_sync(&di->job->job, true);
-+                    canceled = true;
-+                }
-+                job_unref(&di->job->job);
-+                di->job = NULL;
-                 aio_context_release(ctx);
--                canceled = true;
-             }
-         }
-     }