# For printing torsen.scad on Wanhao Duplicator 4

# generated by Slic3r 1.2.10-dev on Fri Nov 20 16:06:58 2015

[filament:Simple Mode]
bed_temperature = 60
extrusion_multiplier = 1
filament_diameter = 1.75
first_layer_bed_temperature = 60
first_layer_temperature = 200
temperature = 200

[presets]
filament = Simple Mode.ini
print = Simple Mode.ini
printer = Simple Mode.ini

[print:Simple Mode]
avoid_crossing_perimeters = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 3
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 0
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 50
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 50%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0.45
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.6
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 40
interface_shells = 0
layer_height = 0.1
max_print_speed = 60
max_volumetric_speed = 0
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 60
perimeters = 3
post_process = 
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 0
skirt_height = 1
skirts = 0
small_perimeter_speed = 30
solid_infill_below_area = 80
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.6
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 45
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 1
support_material_interface_spacing = 0.5
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 0.5
support_material_speed = 60
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 0.6
top_solid_infill_speed = 40
top_solid_layers = 3
travel_speed = 130
xy_size_compensation = 0

[printer:Simple Mode]
bed_shape = -112.5x-72.5,112.5x-72.5,112.5x72.5,-112.5x72.5
before_layer_gcode = 
end_gcode = (******* End.gcode*******)\nG0 Z155\nM18\nM140 S0 T0\nM104 S0 T0\nM73 P100 (end  build progress)\nG162 X Y F2500\nM18\nM70 P5 (We <3 Making Things!)\nM72 P1 (Play Ta-Da song)\n(*********end End.gcode*******)\n
extruder_offset = 0x0,0x0
gcode_flavor = sailfish
layer_gcode = 
nozzle_diameter = 0.4,0.4
octoprint_apikey = 
octoprint_host = 
pressure_advance = 0
retract_before_travel = 2,2
retract_layer_change = 0,0
retract_length = 2,2
retract_length_toolchange = 10,10
retract_lift = 0,0
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retract_speed = 40,40
start_gcode = (**** beginning of start.gcode ****)\n(This is start code for The Replicator 2 running a single material print)\nM73 P0 (enable build progress)\nM103 (disable RPM)\nG21 (set units to mm)\nG90 (set positioning to absolute)\nM140 S60 T0 (set HBP temperature)\nM104 S200 T1 (set extruder temperature)\n(**** begin homing ****)\nG162 X Y F2500 (home XY axes maximum)\nG161 Z F1100 (home Z axis minimum)\nG92 Z-5 (set Z to -5)\nG1 Z0.0 (move Z to "0")\nG161 Z F100 (home Z axis minimum)\nM132 X Y Z A B (Recall stored home offsets for XYZAB axis)\n(**** end homing ****)\nG1 X-110.5 Y-74 Z150 F3300.0 (move to waiting position)\nG130 X0 Y0 A0 B0 (Set Stepper motor Vref to lower value while heating)\nM6 T1 (wait for toolhead parts, nozzle, HBP, etc., to reach temperature)\nG130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)\nM135 T1\nG0 X-110.5 Y-74 (Position Nozzle)\nG0 Z0.6     (Position Height)\nG92 E0 (Set E to 0)\nG1 E4 F300 (Extrude 4mm of filament)\nG92 E0 (Set E to 0 again)\n(**** end of start.gcode ****)\n
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0,0
z_offset = 0

[settings]
autocenter = 1
mode = expert

[simple]
avoid_crossing_perimeters = 1
bed_shape = 0x0,225x0,225x145,0x145
bed_temperature = 60
before_layer_gcode = 
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 3
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = (******* End.gcode*******)\nG0 Z155\nM18\nM140 S0 T0\nM104 S0 T0\nM73 P100 (end  build progress)\nG162 X Y F2500\nM18\nM70 P5 (We <3 Making Things!)\nM72 P1 (Play Ta-Da song)\n(*********end End.gcode*******)\n
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
fill_angle = 45
fill_density = 100%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_bed_temperature = 60
first_layer_extrusion_width = 200%
first_layer_height = 0.4
first_layer_speed = 30
first_layer_temperature = 200
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = sailfish
infill_acceleration = 0
infill_every_layers = 10
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 80
interface_shells = 0
layer_gcode = 
layer_height = 0.2
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
min_skirt_length = 0
notes = 
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
perimeters = 3
post_process = 
pressure_advance = 0
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 0
retract_length = 2
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 5
small_perimeter_speed = 15
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 20
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = (**** beginning of start.gcode ****)\n(This is start code for The Replicator 2 running a single material print)\nM73 P0 (enable build progress)\nM103 (disable RPM)\nG21 (set units to mm)\nG90 (set positioning to absolute)\nM140 S60 T0 (set HBP temperature)\nM104 S200 T1 (set extruder temperature)\n(**** begin homing ****)\nG162 X Y F2500 (home XY axes maximum)\nG161 Z F1100 (home Z axis minimum)\nG92 Z-5 (set Z to -5)\nG1 Z0.0 (move Z to "0")\nG161 Z F100 (home Z axis minimum)\nM132 X Y Z A B (Recall stored home offsets for XYZAB axis)\n(**** end homing ****)\nG1 X-110.5 Y-74 Z150 F3300.0 (move to waiting position)\nG130 X0 Y0 A0 B0 (Set Stepper motor Vref to lower value while heating)\nM6 T1 (wait for toolhead parts, nozzle, HBP, etc., to reach temperature)\nG130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)\nM135 T1\nG0 X-110.5 Y-74 (Position Nozzle)\nG0 Z0.6     (Position Height)\nG92 E0 (Set E to 0)\nG1 E4 F300 (Extrude 4mm of filament)\nG92 E0 (Set E to 0 again)\n(**** end of start.gcode ****)\n
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 0
temperature = 200
thin_walls = 1
threads = 2
toolchange_gcode = 
top_infill_extrusion_width = 0
top_solid_infill_speed = 15
top_solid_layers = 3
travel_speed = 130
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
xy_size_compensation = 0
z_offset = 0