mirror of https://github.com/vitalif/Slic3r
New --solid-infill-extrusion-width option
Alessandro Ranellucci
parent
c13d9e9fb3
commit
35bd5a3423
|
|
@ -300,6 +300,8 @@ The author of the Silk icon set is Mark James.
|
|||
Set a different extrusion width for perimeters
|
||||
--infill-extrusion-width
|
||||
Set a different extrusion width for infill
|
||||
--solid-infill-extrusion-width
|
||||
Set a different extrusion width for solid infill
|
||||
--top-infill-extrusion-width
|
||||
Set a different extrusion width for top infill
|
||||
--support-material-extrusion-width
|
||||
|
|
|
|||
|
|
@ -446,8 +446,16 @@ our $Options = {
|
|||
type => 'f',
|
||||
default => 0,
|
||||
},
|
||||
'solid_infill_extrusion_width' => {
|
||||
label => 'Solid infill',
|
||||
tooltip => 'Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If expressed as percentage (for example 90%) if will be computed over layer height.',
|
||||
sidetext => 'mm or % (leave 0 for default)',
|
||||
cli => 'solid-infill-extrusion-width=s',
|
||||
type => 'f',
|
||||
default => 0,
|
||||
},
|
||||
'top_infill_extrusion_width' => {
|
||||
label => 'Top infill',
|
||||
label => 'Top solid infill',
|
||||
tooltip => 'Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. If expressed as percentage (for example 90%) if will be computed over layer height.',
|
||||
sidetext => 'mm or % (leave 0 for default)',
|
||||
cli => 'top-infill-extrusion-width=s',
|
||||
|
|
|
|||
|
|
@ -100,7 +100,7 @@ sub make_fill {
|
|||
|
||||
# add spacing between surfaces
|
||||
{
|
||||
my $distance = $layerm->infill_flow->scaled_spacing / 2;
|
||||
my $distance = $layerm->solid_infill_flow->scaled_spacing / 2;
|
||||
@surfaces = map $_->offset(-$distance), @surfaces;
|
||||
}
|
||||
|
||||
|
|
@ -109,9 +109,12 @@ sub make_fill {
|
|||
SURFACE: foreach my $surface (@surfaces) {
|
||||
my $filler = $Slic3r::Config->fill_pattern;
|
||||
my $density = $Slic3r::Config->fill_density;
|
||||
my $flow_spacing = ($surface->surface_type == S_TYPE_TOP)
|
||||
? $layerm->top_infill_flow->spacing
|
||||
: $layerm->infill_flow->spacing;
|
||||
my $flow = ($surface->surface_type == S_TYPE_TOP)
|
||||
? $layerm->top_infill_flow
|
||||
: $surface->is_solid
|
||||
? $layerm->solid_infill_flow
|
||||
: $layerm->infill_flow;
|
||||
my $flow_spacing = $flow->spacing;
|
||||
my $is_bridge = $layerm->id > 0 && $surface->is_bridge;
|
||||
my $is_solid = $surface->is_solid;
|
||||
|
||||
|
|
|
|||
|
|
@ -511,7 +511,7 @@ sub build {
|
|||
{
|
||||
title => 'Extrusion width',
|
||||
label_width => 180,
|
||||
options => [qw(extrusion_width first_layer_extrusion_width perimeter_extrusion_width infill_extrusion_width top_infill_extrusion_width support_material_extrusion_width)],
|
||||
options => [qw(extrusion_width first_layer_extrusion_width perimeter_extrusion_width infill_extrusion_width solid_infill_extrusion_width top_infill_extrusion_width support_material_extrusion_width)],
|
||||
},
|
||||
{
|
||||
title => 'Flow',
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@ has 'layer' => (
|
|||
has 'region' => (is => 'ro', required => 1, handles => [qw(extruders)]);
|
||||
has 'perimeter_flow' => (is => 'rw');
|
||||
has 'infill_flow' => (is => 'rw');
|
||||
has 'solid_infill_flow' => (is => 'rw');
|
||||
has 'top_infill_flow' => (is => 'rw');
|
||||
has 'infill_area_threshold' => (is => 'lazy');
|
||||
has 'overhang_width' => (is => 'lazy');
|
||||
|
|
@ -59,15 +60,15 @@ sub _update_flows {
|
|||
return if !$self->region;
|
||||
|
||||
if ($self->id == 0) {
|
||||
$self->perimeter_flow
|
||||
($self->region->first_layer_flows->{perimeter} || $self->region->flows->{perimeter});
|
||||
$self->infill_flow
|
||||
($self->region->first_layer_flows->{infill} || $self->region->flows->{infill});
|
||||
$self->top_infill_flow
|
||||
($self->region->first_layer_flows->{top_infill} || $self->region->flows->{top_infill});
|
||||
for (qw(perimeter infill solid_infill top_infill)) {
|
||||
my $method = "${_}_flow";
|
||||
$self->$method
|
||||
($self->region->first_layer_flows->{$_} || $self->region->flows->{$_});
|
||||
}
|
||||
} else {
|
||||
$self->perimeter_flow($self->region->flows->{perimeter});
|
||||
$self->infill_flow($self->region->flows->{infill});
|
||||
$self->solid_infill_flow($self->region->flows->{solid_infill});
|
||||
$self->top_infill_flow($self->region->flows->{top_infill});
|
||||
}
|
||||
}
|
||||
|
|
@ -80,7 +81,7 @@ sub _build_overhang_width {
|
|||
|
||||
sub _build_infill_area_threshold {
|
||||
my $self = shift;
|
||||
return $self->infill_flow->scaled_spacing ** 2;
|
||||
return $self->solid_infill_flow->scaled_spacing ** 2;
|
||||
}
|
||||
|
||||
# build polylines from lines
|
||||
|
|
@ -160,7 +161,7 @@ sub make_perimeters {
|
|||
my $self = shift;
|
||||
|
||||
my $perimeter_spacing = $self->perimeter_flow->scaled_spacing;
|
||||
my $infill_spacing = $self->infill_flow->scaled_spacing;
|
||||
my $infill_spacing = $self->solid_infill_flow->scaled_spacing;
|
||||
my $gap_area_threshold = $self->perimeter_flow->scaled_width ** 2;
|
||||
|
||||
# this array will hold one arrayref per original surface (island);
|
||||
|
|
|
|||
|
|
@ -201,8 +201,9 @@ sub init_extruders {
|
|||
my $region = $self->regions->[$region_id];
|
||||
|
||||
# per-role extruders and flows
|
||||
for (qw(perimeter infill top_infill)) {
|
||||
my $extruder_name = $_ eq 'top_infill' ? 'infill' : $_;
|
||||
for (qw(perimeter infill solid_infill top_infill)) {
|
||||
my $extruder_name = $_;
|
||||
$extruder_name =~ s/^(?:solid|top)_//;
|
||||
$region->extruders->{$_} = ($self->regions_count > 1)
|
||||
? $self->extruders->[$extruder_mapping{$region_id}]
|
||||
: $self->extruders->[$self->config->get("${extruder_name}_extruder")-1];
|
||||
|
|
|
|||
|
|
@ -581,7 +581,7 @@ sub discover_horizontal_shells {
|
|||
# make sure the new internal solid is wide enough, as it might get collapsed when
|
||||
# spacing is added in Fill.pm
|
||||
{
|
||||
my $margin = 3 * $layerm->infill_flow->scaled_width; # require at least this size
|
||||
my $margin = 3 * $layerm->solid_infill_flow->scaled_width; # require at least this size
|
||||
my $too_narrow = diff_ex(
|
||||
[ map @$_, @$new_internal_solid ],
|
||||
[ offset([ offset([ map @$_, @$new_internal_solid ], -$margin) ], +$margin) ],
|
||||
|
|
@ -708,12 +708,12 @@ sub combine_infill {
|
|||
# so let's remove those areas from all layers
|
||||
|
||||
my @intersection_with_clearance = map $_->offset(
|
||||
$layerms[-1]->infill_flow->scaled_width / 2
|
||||
$layerms[-1]->solid_infill_flow->scaled_width / 2
|
||||
+ $layerms[-1]->perimeter_flow->scaled_width / 2
|
||||
# Because fill areas for rectilinear and honeycomb are grown
|
||||
# later to overlap perimeters, we need to counteract that too.
|
||||
+ (($type == S_TYPE_INTERNALSOLID || $Slic3r::Config->fill_pattern =~ /(rectilinear|honeycomb)/)
|
||||
? $layerms[-1]->infill_flow->scaled_width * &Slic3r::PERIMETER_INFILL_OVERLAP_OVER_SPACING
|
||||
? $layerms[-1]->solid_infill_flow->scaled_width * &Slic3r::PERIMETER_INFILL_OVERLAP_OVER_SPACING
|
||||
: 0)
|
||||
), @$intersection;
|
||||
|
||||
|
|
|
|||
|
|
@ -353,6 +353,8 @@ $j
|
|||
Set a different extrusion width for perimeters
|
||||
--infill-extrusion-width
|
||||
Set a different extrusion width for infill
|
||||
--solid-infill-extrusion-width
|
||||
Set a different extrusion width for solid infill
|
||||
--top-infill-extrusion-width
|
||||
Set a different extrusion width for top infill
|
||||
--support-material-extrusion-width
|
||||
|
|
|
|||
Loading…
Reference in New Issue