mirror of https://github.com/vitalif/Slic3r
New option for support material pattern spacing; also, fixes and speedups to the overhang detection
Alessandro Ranellucci
parent
36753d85b7
commit
a6dca1d82a
|
|
@ -168,6 +168,8 @@ The author is Alessandro Ranellucci.
|
|||
Overhang threshold angle (range: 0-90, default: 45)
|
||||
--support-material-pattern
|
||||
Pattern to use for support material (default: rectilinear)
|
||||
--support-material-spacing
|
||||
Spacing between pattern lines (mm, default: 2.5)
|
||||
--support-material-angle
|
||||
Support material angle in degrees (range: 0-90, default: 0)
|
||||
|
||||
|
|
|
|||
|
|
@ -125,6 +125,7 @@ our $randomize_start = 1;
|
|||
our $support_material = 0;
|
||||
our $support_material_threshold = 45;
|
||||
our $support_material_pattern = 'rectilinear';
|
||||
our $support_material_spacing = 2.5;
|
||||
our $support_material_angle = 0;
|
||||
our $support_material_tool = 0;
|
||||
our $start_gcode = "G28 ; home all axes";
|
||||
|
|
|
|||
|
|
@ -296,6 +296,11 @@ our $Options = {
|
|||
values => [qw(rectilinear honeycomb)],
|
||||
labels => [qw(rectilinear honeycomb)],
|
||||
},
|
||||
'support_material_spacing' => {
|
||||
label => 'Pattern spacing (mm)',
|
||||
cli => 'support-material-spacing=f',
|
||||
type => 'f',
|
||||
},
|
||||
'support_material_angle' => {
|
||||
label => 'Pattern angle (°)',
|
||||
cli => 'support-material-angle=i',
|
||||
|
|
|
|||
|
|
@ -86,7 +86,7 @@ sub new {
|
|||
},
|
||||
support_material => {
|
||||
title => 'Support material',
|
||||
options => [qw(support_material support_material_threshold support_material_pattern support_material_angle support_material_tool)],
|
||||
options => [qw(support_material support_material_threshold support_material_pattern support_material_spacing support_material_angle support_material_tool)],
|
||||
},
|
||||
);
|
||||
$self->{panels} = \%panels;
|
||||
|
|
|
|||
|
|
@ -490,10 +490,7 @@ sub generate_support_material {
|
|||
|
||||
my $threshold_rad = deg2rad($Slic3r::support_material_threshold + 1); # +1 makes the threshold inclusive
|
||||
my $overhang_width = $threshold_rad == 0 ? undef : scale $Slic3r::layer_height * ((cos $threshold_rad) / (sin $threshold_rad));
|
||||
my $distance_from_object = scale $Slic3r::flow->width;
|
||||
printf "width = %s\n", unscale $overhang_width;
|
||||
# determine unsupported surfaces
|
||||
my @unsupported_expolygons = ();
|
||||
my $distance_from_object = 1.5 * scale $Slic3r::flow->width;
|
||||
|
||||
# determine support regions in each layer (for upper layers)
|
||||
Slic3r::debugf "Detecting regions\n";
|
||||
|
|
@ -503,46 +500,36 @@ sub generate_support_material {
|
|||
my @queue = (); # the number of items of this array determines the number of empty interface layers
|
||||
for my $i (reverse 0 .. $#{$self->layers}) {
|
||||
my $layer = $self->layers->[$i];
|
||||
my $upper_layer = $i < $#{$self->layers} ? $self->layers->[$i+1] : undef;
|
||||
my $lower_layer = $i > 0 ? $self->layers->[$i-1] : undef;
|
||||
|
||||
# step 1: generate support material in current layer (for upper layers)
|
||||
push @current_support_regions, @{ shift @queue } if @queue && $i < $#{$self->layers};
|
||||
|
||||
@current_support_regions = @{diff_ex(
|
||||
[ map @$_, @current_support_regions ],
|
||||
[ map @$_, map $_->expolygon->offset_ex($distance_from_object), @{$layer->slices} ],
|
||||
[ map @{$_->expolygon}, @{$layer->slices} ],
|
||||
)};
|
||||
|
||||
$layers{$i} = [@current_support_regions];
|
||||
$layers{$i} = diff_ex(
|
||||
[ map @$_, @current_support_regions ],
|
||||
[ map @$_, map $_->expolygon->offset_ex($distance_from_object), @{$layer->slices} ],
|
||||
);
|
||||
$_->simplify(scale $layer->flow->spacing * 2) for @{$layers{$i}};
|
||||
|
||||
# step 2: get layer overhangs and put them into queue for adding support inside lower layers
|
||||
# we need an angle threshold for this
|
||||
my @overhangs = ();
|
||||
if ($upper_layer) {
|
||||
if ($lower_layer) {
|
||||
@overhangs = map $_->offset_ex(2 * $overhang_width), @{diff_ex(
|
||||
[ map @$_, map $_->expolygon->offset_ex(-$overhang_width), @{$upper_layer->slices} ],
|
||||
[ map @{$_->expolygon}, @{$layer->slices} ],
|
||||
[ map @$_, map $_->expolygon->offset_ex(-$overhang_width), @{$layer->slices} ],
|
||||
[ map @{$_->expolygon}, @{$lower_layer->slices} ],
|
||||
1,
|
||||
)};
|
||||
}
|
||||
|
||||
# get unsupported surfaces for current layer as all bottom slices
|
||||
# minus the bridges offsetted to cover their perimeters.
|
||||
# actually, we are marking as bridges more than we should be, so
|
||||
# better build support material for bridges too rather than ignoring
|
||||
# those parts. a visibility check algorithm is needed.
|
||||
# @overhangs = @{diff_ex(
|
||||
# [ map @$_, @overhangs ],
|
||||
# [ map @$_, map $_->expolygon->offset_ex(scale $layer->flow->spacing * $Slic3r::perimeters),
|
||||
# grep $_->surface_type == S_TYPE_BOTTOM && defined $_->bridge_angle,
|
||||
# @{$layer->fill_surfaces} ],
|
||||
# )};
|
||||
push @queue, [ map $_->clone, @overhangs ];
|
||||
|
||||
$_->simplify(scale $layer->flow->spacing * 3) for @{ $queue[-1] };
|
||||
push @unsupported_expolygons, @{ $queue[-1] };
|
||||
push @queue, [@overhangs];
|
||||
}
|
||||
}
|
||||
return if !@unsupported_expolygons;
|
||||
return if !map @$_, values %layers;
|
||||
|
||||
# generate paths for the pattern that we're going to use
|
||||
Slic3r::debugf "Generating patterns\n";
|
||||
|
|
@ -550,7 +537,7 @@ sub generate_support_material {
|
|||
{
|
||||
# 0.5 makes sure the paths don't get clipped externally when applying them to layers
|
||||
my @support_material_areas = map $_->offset_ex(- 0.5 * scale $Slic3r::flow->width),
|
||||
@{union_ex([ map $_->contour, @unsupported_expolygons ])};
|
||||
@{union_ex([ map $_->contour, map @$_, values %layers ])};
|
||||
|
||||
my $fill = Slic3r::Fill->new(print => $params{print});
|
||||
my $filler = $fill->filler($Slic3r::support_material_pattern);
|
||||
|
|
@ -560,7 +547,7 @@ sub generate_support_material {
|
|||
foreach my $expolygon (@support_material_areas) {
|
||||
my @paths = $filler->fill_surface(
|
||||
Slic3r::Surface->new(expolygon => $expolygon),
|
||||
density => 0.20,
|
||||
density => $Slic3r::flow->spacing / $Slic3r::support_material_spacing,
|
||||
flow_spacing => $Slic3r::flow->spacing,
|
||||
);
|
||||
my $params = shift @paths;
|
||||
|
|
|
|||
|
|
@ -213,6 +213,8 @@ $j
|
|||
Overhang threshold angle (range: 0-90, default: $Slic3r::support_material_threshold)
|
||||
--support-material-pattern
|
||||
Pattern to use for support material (default: $Slic3r::support_material_pattern)
|
||||
--support-material-spacing
|
||||
Spacing between pattern lines (mm, default: $Slic3r::support_material_spacing)
|
||||
--support-material-angle
|
||||
Support material angle in degrees (range: 0-90, default: $Slic3r::support_material_angle)
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue