vitalif
/
Slic3r
mirror of https://github.com/vitalif/Slic3r
1
0
Fork 0
Code Issues Releases Wiki Activity

Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77

degen-loop-screen
Alessandro Ranellucci 2011-12-01 22:03:13 +01:00
parent 2a02d26ca5
commit e99c9f9e5f
6 changed files with 120 additions and 112 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
README.markdown
View File

@ -100,17 +100,17 @@ The author is Alessandro Ranellucci (me).
Filament options:
--filament-diameter Diameter in mm of your raw filament (default: 3)
--extrusion-multiplier
Change this to alter the amount of plastic extruded. There should be
Change this to alter the amount of plastic extruded. There should be
very little need to change this value, which is only useful to
compensate for filament packing (default: 1)
--temperature Extrusion temperature, set 0 to disable (default: 200)
Speed options:
--print-feed-rate Speed of print moves in mm/sec (default: 60)
--travel-feed-rate Speed of non-print moves in mm/sec (default: 130)
--perimeter-feed-rate
Speed of print moves for perimeters in mm/sec (default: 60)
--bridge-feed-rate Speed of bridge print moves in mm/sec (default: 60)
--travel-speed Speed of non-print moves in mm/sec (default: 130)
--perimeter-speed Speed of print moves for perimeters in mm/sec (default: 30)
--infill-speed Speed of print moves in mm/sec (default: 60)
--solid-infill-speed Speed of print moves for solid surfaces in mm/sec (default: 60)
--bridge-speed Speed of bridge print moves in mm/sec (default: 60)
--bottom-layer-speed-ratio
Factor to increase/decrease speeds on bottom
layer by (default: 0.3)

10
lib/Slic3r.pm
View File

@ -48,11 +48,11 @@ our $extrusion_multiplier = 1;
our $temperature = 200;
# speed options
our $travel_feed_rate = 130; # mm/sec
our $perimeter_feed_rate = 30; # mm/sec
our $infill_feed_rate = 60; # mm/sec
our $solid_infill_feed_rate = 60; # mm/sec
our $bridge_feed_rate = 60; # mm/sec
our $travel_speed = 130; # mm/sec
our $perimeter_speed = 30; # mm/sec
our $infill_speed = 60; # mm/sec
our $solid_infill_speed = 60; # mm/sec
our $bridge_speed = 60; # mm/sec
our $bottom_layer_speed_ratio = 0.3;
# accuracy options

71
lib/Slic3r/Config.pm
View File

@ -10,119 +10,158 @@ our $Options = {
# printer options
'nozzle_diameter' => {
label => 'Nozzle diameter',
cli => 'nozzle-diameter=f',
type => 'f',
},
'print_center' => {
label => 'Print center',
cli => 'print-center=s',
type => 'point',
serialize => sub { join ',', @{$_[0]} },
deserialize => sub { [ split /,/, $_[0] ] },
},
'use_relative_e_distances' => {
label => 'Use relative E distances',
cli => 'use-relative-e-distances',
type => 'bool',
},
'no_extrusion' => {
label => 'No extrusion',
cli => 'no-extrusion',
type => 'bool',
},
'z_offset' => {
label => 'Z offset',
cli => 'z-offset=f',
type => 'f',
},
'gcode_arcs' => {
label => 'Use native GCODE arcs',
cli => 'gcode-arcs',
type => 'bool',
},
'g0' => {
label => 'Use g0 for travel moves',
cli => 'g0',
type => 'bool',
},
# filament options
'filament_diameter' => {
label => 'Diameter (mm)',
cli => 'filament-diameter=f',
type => 'f',
},
'extrusion_multiplier' => {
label => 'Extrusion multiplier',
cli => 'extrusion-multiplier=f',
type => 'f',
aliases => [qw(filament_packing_density)],
},
'temperature' => {
label => 'Temperature (°C)',
cli => 'temperature=i',
type => 'i',
},
# speed options
'travel_feed_rate' => {
'travel_speed' => {
label => 'Travel (mm/s)',
cli => 'travel-speed=i',
type => 'f',
aliases => [qw(travel_feed_rate)],
},
'perimeter_feed_rate' => {
'perimeter_speed' => {
label => 'Perimeters (mm/s)',
cli => 'perimeter-speed=i',
type => 'f',
aliases => [qw(perimeter_feed_rate)],
},
'infill_feed_rate' => {
'infill_speed' => {
label => 'Infill (mm/s)',
cli => 'infill-speed=i',
type => 'f',
aliases => [qw(print_feed_rate)],
aliases => [qw(print_feed_rate infill_feed_rate)],
},
'solid_infill_feed_rate' => {
'solid_infill_speed' => {
label => 'Solid infill (mm/s)',
cli => 'solid-infill-speed=i',
type => 'f',
aliases => [qw(solid_infill_feed_rate)],
},
'bridge_feed_rate' => {
'bridge_speed' => {
label => 'Bridges (mm/s)',
cli => 'bridge-speed=i',
type => 'f',
aliases => [qw(bridge_feed_rate)],
},
'bottom_layer_speed_ratio' => {
label => 'Bottom layer speed ratio',
cli => 'bottom-layer-speed-ratio=f',
type => 'f',
},
# accuracy options
'layer_height' => {
label => 'Layer height (mm)',
cli => 'layer-height=f',
type => 'f',
},
'extrusion_width_ratio' => {
label => 'Extrusion width (ratio over layer height; leave zero to calculate automatically)',
cli => 'extrusion-width-ratio=f',
type => 'f',
},
'first_layer_height_ratio' => {
label => 'First layer height ratio',
cli => 'first-layer-height-ratio=f',
type => 'f',
},
'infill_every_layers' => {
label => 'Infill every N layers',
cli => 'infill-every-layers=i',
type => 'i',
},
# print options
'perimeters' => {
label => 'Perimeters',
cli => 'perimeters=i',
type => 'i',
aliases => [qw(perimeter_offsets)],
},
'solid_layers' => {
label => 'Solid layers',
cli => 'solid-layers=i',
type => 'i',
},
'fill_pattern' => {
label => 'Fill pattern',
cli => 'fill-pattern=s',
type => 'select',
values => [qw(rectilinear line concentric hilbertcurve archimedeanchords octagramspiral)],
labels => [qw(rectilinear line concentric), 'hilbertcurve (slow)', 'archimedeanchords (slow)', 'octagramspiral (slow)'],
},
'solid_fill_pattern' => {
label => 'Solid fill pattern',
cli => 'solid-fill-pattern=s',
type => 'select',
values => [qw(rectilinear concentric hilbertcurve archimedeanchords octagramspiral)],
labels => [qw(rectilinear concentric), 'hilbertcurve (slow)', 'archimedeanchords (slow)', 'octagramspiral (slow)'],
},
'fill_density' => {
label => 'Fill density',
cli => 'fill-density=f',
type => 'f',
},
'fill_angle' => {
label => 'Fill angle (°)',
cli => 'fill-angle=i',
type => 'i',
},
'start_gcode' => {
label => 'Start GCODE',
cli => 'start-gcode=s',
type => 's',
multiline => 1,
width => 350,
@ -132,6 +171,7 @@ our $Options = {
},
'end_gcode' => {
label => 'End GCODE',
cli => 'end-gcode=s',
type => 's',
multiline => 1,
width => 350,
@ -143,60 +183,73 @@ our $Options = {
# retraction options
'retract_length' => {
label => 'Length (mm)',
cli => 'retract-length=f',
type => 'f',
},
'retract_speed' => {
label => 'Speed (mm/s)',
cli => 'retract-speed=i',
type => 'i',
},
'retract_restart_extra' => {
label => 'Extra length on restart (mm)',
cli => 'retract-restart-extra=f',
type => 'f',
},
'retract_before_travel' => {
label => 'Minimum travel after retraction (mm)',
cli => 'retract-before-travel=f',
type => 'f',
},
'retract_lift' => {
label => 'Lift Z (mm)',
cli => 'retract-lift=f',
type => 'f',
},
# skirt options
'skirts' => {
label => 'Loops',
cli => 'skirts=i',
type => 'i',
},
'skirt_distance' => {
label => 'Distance from object (mm)',
cli => 'skirt-distance=i',
type => 'i',
},
'skirt_height' => {
label => 'Skirt height (layers)',
cli => 'skirt-height=i',
type => 'i',
},
# transform options
'scale' => {
label => 'Scale',
cli => 'scale=f',
type => 'f',
},
'rotate' => {
label => 'Rotate (°)',
cli => 'rotate=i',
type => 'i',
},
'duplicate_x' => {
label => 'Copies along X',
cli => 'duplicate-x=i',
type => 'i',
aliases => [qw(multiply_x)],
},
'duplicate_y' => {
label => 'Copies along Y',
cli => 'duplicate-y=i',
type => 'i',
aliases => [qw(multiply_y)],
},
'duplicate_distance' => {
label => 'Distance between copies',
cli => 'duplicate-distance=i',
type => 'i',
aliases => [qw(multiply_distance)],
},
@ -260,7 +313,7 @@ sub validate_cli {
die "Invalid value for --${_}-gcode: file does not exist"
if !-e $opt->{$_."_gcode"};
open my $fh, "<", $opt->{$_."_gcode"};
set($_."_gcode", do { local $/; <$fh> });
$opt->{$_."_gcode"} = do { local $/; <$fh> };
close $fh;
}
}
@ -361,8 +414,8 @@ sub validate {
if $Slic3r::skirt_height < 1;
# legacy with existing config files
$Slic3r::bridge_feed_rate ||= $Slic3r::infill_feed_rate;
$Slic3r::solid_infill_feed_rate ||= $Slic3r::infill_feed_rate;
$Slic3r::bridge_speed ||= $Slic3r::infill_speed;
$Slic3r::solid_infill_speed ||= $Slic3r::infill_speed;
}
1;

30
lib/Slic3r/Extruder.pm
View File

@ -16,25 +16,25 @@ has 'last_f' => (is => 'rw', default => sub {0});
has 'dec' => (is => 'ro', default => sub { 3 } );
# calculate speeds
has 'travel_feed_rate' => (
has 'travel_speed' => (
is => 'ro',
default => sub { $Slic3r::travel_feed_rate * 60 }, # mm/min
default => sub { $Slic3r::travel_speed * 60 }, # mm/min
);
has 'perimeter_feed_rate' => (
has 'perimeter_speed' => (
is => 'ro',
default => sub { $Slic3r::perimeter_feed_rate * 60 }, # mm/min
default => sub { $Slic3r::perimeter_speed * 60 }, # mm/min
);
has 'infill_feed_rate' => (
has 'infill_speed' => (
is => 'ro',
default => sub { $Slic3r::infill_feed_rate * 60 }, # mm/min
default => sub { $Slic3r::infill_speed * 60 }, # mm/min
);
has 'solid_infill_feed_rate' => (
has 'solid_infill_speed' => (
is => 'ro',
default => sub { $Slic3r::solid_infill_feed_rate * 60 }, # mm/min
default => sub { $Slic3r::solid_infill_speed * 60 }, # mm/min
);
has 'bridge_feed_rate' => (
has 'bridge_speed' => (
is => 'ro',
default => sub { $Slic3r::bridge_feed_rate * 60 }, # mm/min
default => sub { $Slic3r::bridge_speed * 60 }, # mm/min
);
has 'retract_speed' => (
is => 'ro',
@ -122,10 +122,10 @@ sub extrude {
# extrude arc or line
$self->print_feed_rate(
$path->role =~ /^(perimeter|skirt)$/o ? $self->perimeter_feed_rate
: $path->role eq 'fill' ? $self->infill_feed_rate
: $path->role eq 'solid-fill' ? $self->solid_infill_feed_rate
: $path->role eq 'bridge' ? $self->bridge_feed_rate
$path->role =~ /^(perimeter|skirt)$/o ? $self->perimeter_speed
: $path->role eq 'fill' ? $self->infill_speed
: $path->role eq 'solid-fill' ? $self->solid_infill_speed
: $path->role eq 'bridge' ? $self->bridge_speed
: die "Unknown role: " . $path->role
);
if ($path->isa('Slic3r::ExtrusionPath::Arc')) {
@ -268,7 +268,7 @@ sub _Gx {
: 1;
# determine speed
my $speed = ($e ? $self->print_feed_rate : $self->travel_feed_rate) * $speed_multiplier;
my $speed = ($e ? $self->print_feed_rate : $self->travel_speed) * $speed_multiplier;
# output speed if it's different from last one used
# (goal: reduce gcode size)

4
lib/Slic3r/GUI/SkeinPanel.pm
View File

@ -25,11 +25,11 @@ sub new {
},
print_speed => {
title => 'Print speed',
options => [qw(perimeter_feed_rate infill_feed_rate solid_infill_feed_rate bridge_feed_rate)],
options => [qw(perimeter_speed infill_speed solid_infill_speed bridge_speed)],
},
speed => {
title => 'Other speed settings',
options => [qw(travel_feed_rate bottom_layer_speed_ratio)],
options => [qw(travel_speed bottom_layer_speed_ratio)],
},
accuracy => {
title => 'Accuracy',

105
slic3r.pl
View File

@ -11,76 +11,29 @@ BEGIN {
use Getopt::Long;
use Slic3r;
use XXX;
$|++;
our %opt;
GetOptions(
'help' => sub { usage() },
'debug' => \$Slic3r::debug,
'o|output=s' => \$opt{output},
'close-after-slicing' => \$opt{close_after_slicing},
my %opt = ();
my %cli_options = ();
{
my %options = (
'help' => sub { usage() },
'debug' => \$Slic3r::debug,
'o|output=s' => \$opt{output},
'close-after-slicing' => \$opt{close_after_slicing},
'save=s' => \$opt{save},
'load=s' => \$opt{load},
);
foreach my $opt_key (keys %$Slic3r::Config::Options) {
my $opt = $Slic3r::Config::Options->{$opt_key};
$options{ $opt->{cli} } = \$cli_options{$opt_key}
if $opt->{cli};
}
'save=s' => \$opt{save},
'load=s' => \$opt{load},
# printer options
'nozzle-diameter=f' => \$Slic3r::nozzle_diameter,
'print-center=s' => \$Slic3r::print_center,
'use-relative-e-distances' => \$Slic3r::use_relative_e_distances,
'no-extrusion' => \$Slic3r::no_extrusion,
'z-offset=f' => \$Slic3r::z_offset,
'gcode-arcs' => \$Slic3r::gcode_arcs,
'g0' => \$Slic3r::g0,
# filament options
'filament-diameter=f' => \$Slic3r::filament_diameter,
'extrusion-multiplier=f' => \$Slic3r::extrusion_multiplier,
'temperature=i' => \$Slic3r::temperature,
# speed options
'travel-feed-rate=i' => \$Slic3r::travel_feed_rate,
'perimeter-feed-rate=i' => \$Slic3r::perimeter_feed_rate,
'infill-feed-rate=i' => \$Slic3r::infill_feed_rate,
'solid-infill-feed-rate=i' => \$Slic3r::solid_infill_feed_rate,
'bridge-feed-rate=i' => \$Slic3r::bridge_feed_rate,
'bottom-layer-speed-ratio=f' => \$Slic3r::bottom_layer_speed_ratio,
# accuracy options
'layer-height=f' => \$Slic3r::layer_height,
'extrusion-width-ratio=f' => \$Slic3r::extrusion_width_ratio,
'first-layer-height-ratio=f' => \$Slic3r::first_layer_height_ratio,
'infill-every-layers=i' => \$Slic3r::infill_every_layers,
# print options
'perimeters=i' => \$Slic3r::perimeters,
'solid-layers=i' => \$Slic3r::solid_layers,
'fill-pattern=s' => \$Slic3r::fill_pattern,
'solid-fill-pattern=s' => \$Slic3r::solid_fill_pattern,
'fill-density=f' => \$Slic3r::fill_density,
'fill-angle=i' => \$Slic3r::fill_angle,
'start-gcode=s' => \$opt{start_gcode},
'end-gcode=s' => \$opt{end_gcode},
# retraction options
'retract-length=f' => \$Slic3r::retract_length,
'retract-speed=i' => \$Slic3r::retract_speed,
'retract-restart-extra=f' => \$Slic3r::retract_restart_extra,
'retract-before-travel=f' => \$Slic3r::retract_before_travel,
'retract-lift=f' => \$Slic3r::retract_lift,
# skirt options
'skirts=i' => \$Slic3r::skirts,
'skirt-distance=i' => \$Slic3r::skirt_distance,
'skirt-height=i' => \$Slic3r::skirt_height,
# transform options
'scale=f' => \$Slic3r::scale,
'rotate=i' => \$Slic3r::rotate,
'duplicate-x=i' => \$Slic3r::duplicate_x,
'duplicate-y=i' => \$Slic3r::duplicate_y,
'duplicate-distance=i' => \$Slic3r::duplicate_distance,
) or usage(1);
GetOptions(%options) or usage(1);
}
# load configuration
if ($opt{load}) {
@ -89,7 +42,11 @@ if ($opt{load}) {
}
# validate command line options
Slic3r::Config->validate_cli(\%opt);
Slic3r::Config->validate_cli(\%cli_options);
# apply command line options
Slic3r::Config->set($_ => $cli_options{$_})
for grep defined $cli_options{$_}, keys %cli_options;
# validate configuration
Slic3r::Config->validate;
@ -155,13 +112,11 @@ Usage: slic3r.pl [ OPTIONS ] file.stl
--temperature Extrusion temperature, set 0 to disable (default: $Slic3r::temperature)
Speed options:
--travel-feed-rate Speed of non-print moves in mm/sec (default: $Slic3r::travel_feed_rate)
--perimeter-feed-rate
Speed of print moves for perimeters in mm/sec (default: $Slic3r::perimeter_feed_rate)
--infill-feed-rate Speed of print moves in mm/sec (default: $Slic3r::infill_feed_rate)
--solid-infill-feed-rate
Speed of print moves for solid surfaces in mm/sec (default: $Slic3r::solid_infill_feed_rate)
--bridge-feed-rate Speed of bridge print moves in mm/sec (default: $Slic3r::bridge_feed_rate)
--travel-speed Speed of non-print moves in mm/sec (default: $Slic3r::travel_speed)
--perimeter-speed Speed of print moves for perimeters in mm/sec (default: $Slic3r::perimeter_speed)
--infill-speed Speed of print moves in mm/sec (default: $Slic3r::infill_speed)
--solid-infill-speed Speed of print moves for solid surfaces in mm/sec (default: $Slic3r::solid_infill_speed)
--bridge-speed Speed of bridge print moves in mm/sec (default: $Slic3r::bridge_speed)
--bottom-layer-speed-ratio
Factor to increase/decrease speeds on bottom
layer by (default: $Slic3r::bottom_layer_speed_ratio)