mirror of https://github.com/vitalif/Slic3r
105 lines
4.1 KiB
Perl
105 lines
4.1 KiB
Perl
use Test::More;
|
|
use strict;
|
|
use warnings;
|
|
|
|
BEGIN {
|
|
use FindBin;
|
|
use lib "$FindBin::Bin/../lib";
|
|
}
|
|
|
|
use List::Util qw(first);
|
|
use Slic3r;
|
|
use Slic3r::Test;
|
|
|
|
plan tests => 2;
|
|
|
|
{
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
$config->set('layer_height', 0.2);
|
|
$config->set('first_layer_height', 0.2);
|
|
$config->set('nozzle_diameter', [0.5]);
|
|
$config->set('infill_every_layers', 2);
|
|
$config->set('infill_extruder', 2);
|
|
$config->set('top_solid_layers', 0);
|
|
$config->set('bottom_solid_layers', 0);
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
ok my $gcode = Slic3r::Test::gcode($print), "infill_every_layers does not crash";
|
|
|
|
my $tool = undef;
|
|
my %layer_infill = (); # layer_z => has_infill
|
|
Slic3r::GCode::Reader->new->parse($gcode, sub {
|
|
my ($self, $cmd, $args, $info) = @_;
|
|
|
|
if ($cmd =~ /^T(\d+)/) {
|
|
$tool = $1;
|
|
} elsif ($cmd eq 'G1' && $info->{extruding} && $info->{dist_XY} > 0) {
|
|
$layer_infill{$self->Z} //= 0;
|
|
if ($tool == $config->infill_extruder-1) {
|
|
$layer_infill{$self->Z} = 1;
|
|
}
|
|
}
|
|
});
|
|
my $layers_with_infill = grep $_, values %layer_infill;
|
|
$layers_with_infill--; # first layer is never combined
|
|
is $layers_with_infill, scalar(keys %layer_infill)/2, 'infill is only present in correct number of layers';
|
|
}
|
|
|
|
# the following needs to be adapted to the new API
|
|
if (0) {
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
$config->set('skirts', 0);
|
|
$config->set('solid_layers', 0);
|
|
$config->set('bottom_solid_layers', 0);
|
|
$config->set('top_solid_layers', 0);
|
|
$config->set('infill_every_layers', 6);
|
|
$config->set('layer_height', 0.06);
|
|
$config->set('perimeters', 1);
|
|
|
|
my $test = sub {
|
|
my ($shift) = @_;
|
|
|
|
my $self = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
|
|
$shift /= &Slic3r::SCALING_FACTOR;
|
|
my $scale = 4; # make room for fat infill lines with low layer height
|
|
|
|
# Put a slope on the box's sides by shifting x and y coords by $tilt * (z / boxheight).
|
|
# The test here is to put such a slight slope on the walls that it should
|
|
# not trigger any extra fill on fill layers that should be empty when
|
|
# combine infill is enabled.
|
|
$_->[0] += $shift * ($_->[2] / (20 / &Slic3r::SCALING_FACTOR)) for @{$self->objects->[0]->meshes->[0]->vertices};
|
|
$_->[1] += $shift * ($_->[2] / (20 / &Slic3r::SCALING_FACTOR)) for @{$self->objects->[0]->meshes->[0]->vertices};
|
|
$_ = [$_->[0]*$scale, $_->[1]*$scale, $_->[2]] for @{$self->objects->[0]->meshes->[0]->vertices};
|
|
|
|
# copy of Print::export_gcode() up to the point
|
|
# after fill surfaces are combined
|
|
$self->init_extruders;
|
|
$_->slice for @{$self->objects};
|
|
$_->make_perimeters for @{$self->objects};
|
|
$_->detect_surfaces_type for @{$self->objects};
|
|
$_->prepare_fill_surfaces for map @{$_->regions}, map @{$_->layers}, @{$self->objects};
|
|
$_->process_external_surfaces for map @{$_->regions}, map @{$_->layers}, @{$self->objects};
|
|
$_->discover_horizontal_shells for @{$self->objects};
|
|
$_->combine_infill for @{$self->objects};
|
|
|
|
# Only layers with id % 6 == 0 should have fill.
|
|
my $spurious_infill = 0;
|
|
foreach my $layer (map @{$_->layers}, @{$self->objects}) {
|
|
++$spurious_infill if ($layer->id % 6 && grep @{$_->fill_surfaces} > 0, @{$layer->regions});
|
|
}
|
|
|
|
$spurious_infill -= scalar(@{$self->objects->[0]->layers} - 1) % 6;
|
|
|
|
fail "spurious fill surfaces found on layers that should have none (walls " . sprintf("%.4f", Slic3r::Geometry::rad2deg(atan2($shift, 20/&Slic3r::SCALING_FACTOR))) . " degrees off vertical)"
|
|
unless $spurious_infill == 0;
|
|
1;
|
|
};
|
|
|
|
# Test with mm skew offsets for the top of the 20mm-high box
|
|
for my $shift (0, 0.0001, 1) {
|
|
ok $test->($shift), "no spurious fill surfaces with box walls " . sprintf("%.4f",Slic3r::Geometry::rad2deg(atan2($shift, 20))) . " degrees off of vertical";
|
|
}
|
|
}
|
|
|
|
__END__
|