diff --git a/Bugzilla/JobQueue/Runner.pm b/Bugzilla/JobQueue/Runner.pm
index 693319e8d..cfaa6351a 100644
--- a/Bugzilla/JobQueue/Runner.pm
+++ b/Bugzilla/JobQueue/Runner.pm
@@ -1,5 +1,3 @@
-# -*- Mode: perl; indent-tabs-mode: nil -*-
-#
 # The contents of this file are subject to the Mozilla Public
 # License Version 1.1 (the "License"); you may not use this file
 # except in compliance with the License. You may obtain a copy of
@@ -16,7 +14,7 @@
 # Portions created by the Initial Developer are Copyright (C) 2008
 # Mozilla Corporation. All Rights Reserved.
 #
-# Contributor(s): 
+# Contributor(s):
 #   Mark Smith <mark@mozilla.com>
 #   Max Kanat-Alexander <mkanat@bugzilla.org>
 
@@ -39,6 +37,7 @@ BEGIN { eval "use base qw(Daemon::Generic)"; }
 
 our $VERSION = BUGZILLA_VERSION;
 
+# FIXME: Support Debian :)
 # Info we need to install/uninstall the daemon on RHEL/Fedora.
 our $chkconfig = "/sbin/chkconfig";
 our $initd = "/etc/init.d";
@@ -48,28 +47,32 @@ our $initscript = "bugzilla-queue";
 # things from gd_preconfig, but in fact it does not. The
 # only thing it uses from gd_preconfig is the "pidfile"
 # config parameter.
-sub gd_preconfig {
+sub gd_preconfig
+{
     my $self = shift;
 
     my $pidfile = $self->{gd_args}{pidfile};
-    if (!$pidfile) {
-        $pidfile = bz_locations()->{datadir} . '/' . $self->{gd_progname} 
-                   . ".pid";
+    if (!$pidfile)
+    {
+        $pidfile = bz_locations()->{datadir} . '/' . $self->{gd_progname} . ".pid";
     }
     return (pidfile => $pidfile);
 }
 
 # All config other than the pidfile has to be done in gd_getopt
 # in order for it to be set up early enough.
-sub gd_getopt {
+sub gd_getopt
+{
     my $self = shift;
 
     $self->SUPER::gd_getopt();
 
-    if ($self->{gd_args}{progname}) {
+    if ($self->{gd_args}{progname})
+    {
         $self->{gd_progname} = $self->{gd_args}{progname};
     }
-    else {
+    else
+    {
         $self->{gd_progname} = basename($0);
     }
 
@@ -79,14 +82,16 @@ sub gd_getopt {
     $0 = $self->{gd_progname};
 }
 
-sub gd_postconfig {
+sub gd_postconfig
+{
     my $self = shift;
     # See the hack above in gd_getopt. This just reverses it
     # in case anything else needs the accurate $0.
     $0 = delete $self->{_original_zero};
 }
 
-sub gd_more_opt {
+sub gd_more_opt
+{
     my $self = shift;
     return (
         'pidfile=s' => \$self->{gd_args}{pidfile},
@@ -94,12 +99,14 @@ sub gd_more_opt {
     );
 }
 
-sub gd_usage {
+sub gd_usage
+{
     pod2usage({ -verbose => 0, -exitval => 'NOEXIT' });
     return 0
 }
 
-sub gd_can_install {
+sub gd_can_install
+{
     my $self = shift;
 
     my $source_file = "contrib/$initscript";
@@ -107,19 +114,24 @@ sub gd_can_install {
     my $sysconfig = '/etc/sysconfig';
     my $config_file = "$sysconfig/$initscript";
 
-    if (!-x $chkconfig  or !-d $initd) {
+    if (!-x $chkconfig or !-d $initd)
+    {
         return $self->SUPER::gd_can_install(@_);
     }
 
-    return sub {
-        if (!-w $initd) {
+    return sub
+    {
+        if (!-w $initd)
+        {
             print "You must run the 'install' command as root.\n";
             return;
         }
-        if (-e $dest_file) {
+        if (-e $dest_file)
+        {
             print "$initscript already in $initd.\n";
         }
-        else {
+        else
+        {
             copy($source_file, $dest_file)
                 or die "Could not copy $source_file to $dest_file: $!";
             chmod(0755, $dest_file)
@@ -127,11 +139,12 @@ sub gd_can_install {
         }
 
         system($chkconfig, '--add', $initscript);
-        print "$initscript installed.",
-              " To start the daemon, do \"$dest_file start\" as root.\n";
+        print "$initscript installed. To start the daemon, do \"$dest_file start\" as root.\n";
 
-        if (-d $sysconfig and -w $sysconfig) {
-            if (-e $config_file) {
+        if (-d $sysconfig and -w $sysconfig)
+        {
+            if (-e $config_file)
+            {
                 print "$config_file already exists.\n";
                 return;
             }
@@ -148,50 +161,58 @@ USER=$owner
 END
             close($config_fh);
         }
-        else {
+        else
+        {
             print "Please edit $dest_file to configure the daemon.\n";
         }
     }
 }
 
-sub gd_can_uninstall {
+sub gd_can_uninstall
+{
     my $self = shift;
 
-    if (-x $chkconfig and -d $initd) {
-        return sub {
-            if (!-e "$initd/$initscript") {
+    if (-x $chkconfig and -d $initd)
+    {
+        return sub
+        {
+            if (!-e "$initd/$initscript")
+            {
                 print "$initscript not installed.\n";
                 return;
             }
             system($chkconfig, '--del', $initscript);
-            print "$initscript disabled.",
-                  " To stop it, run: $initd/$initscript stop\n";
+            print "$initscript disabled. To stop it, run: $initd/$initscript stop\n";
         }
     }
 
     return $self->SUPER::gd_can_install(@_);
 }
 
-sub gd_check {
+sub gd_check
+{
     my $self = shift;
 
     # Get a count of all the jobs currently in the queue.
     my $jq = Bugzilla->job_queue();
     my @dbs = $jq->bz_databases();
     my $count = 0;
-    foreach my $driver (@dbs) {
+    foreach my $driver (@dbs)
+    {
         $count += $driver->select_one('SELECT COUNT(*) FROM ts_job', []);
     }
     print get_text('job_queue_depth', { count => $count }) . "\n";
 }
 
-sub gd_setup_signals {
+sub gd_setup_signals
+{
     my $self = shift;
     $self->SUPER::gd_setup_signals();
     $SIG{TERM} = sub { $self->gd_quit_event(); }
 }
 
-sub gd_run {
+sub gd_run
+{
     my $self = shift;
 
     my $jq = Bugzilla->job_queue();