diff --git a/debian/rules b/debian/rules index ccf2412e..cc73333b 100755 --- a/debian/rules +++ b/debian/rules @@ -341,11 +341,6 @@ binary-arch: install install-udeb ${debdir}/ss-dev/usr/share/doc/libss${SS_SOVERSION}/examples $(INSTALL) -d ${debdir}/uuid-dev/usr/share/doc/libuuid${UUID_SOVERSION} - if test -f /etc/lsb-release && \ - grep -q DISTRIB_ID=Ubuntu /etc/lsb-release; then \ - $(INSTALL) -p -m 0644 doc/rfc4122.txt \ - ${debdir}/uuid-dev/usr/share/doc/libuuid${UUID_SOVERSION}; \ - fi dh_installinfo -pcomerr-dev ${stdbuilddir}/lib/et/com_err.info dh_installinfo -pe2fslibs-dev ${stdbuilddir}/doc/libext2fs.info diff --git a/doc/rfc4122.txt b/doc/rfc4122.txt deleted file mode 100644 index 31ceaab4..00000000 --- a/doc/rfc4122.txt +++ /dev/null @@ -1,1795 +0,0 @@ - - - - - - -Network Working Group P. Leach -Request for Comments: 4122 Microsoft -Category: Standards Track M. Mealling - Refactored Networks, LLC - R. Salz - DataPower Technology, Inc. - July 2005 - - - A Universally Unique IDentifier (UUID) URN Namespace - -Status of This Memo - - This document specifies an Internet standards track protocol for the - Internet community, and requests discussion and suggestions for - improvements. Please refer to the current edition of the "Internet - Official Protocol Standards" (STD 1) for the standardization state - and status of this protocol. Distribution of this memo is unlimited. - -Copyright Notice - - Copyright (C) The Internet Society (2005). - -Abstract - - This specification defines a Uniform Resource Name namespace for - UUIDs (Universally Unique IDentifier), also known as GUIDs (Globally - Unique IDentifier). A UUID is 128 bits long, and can guarantee - uniqueness across space and time. UUIDs were originally used in the - Apollo Network Computing System and later in the Open Software - Foundation's (OSF) Distributed Computing Environment (DCE), and then - in Microsoft Windows platforms. - - This specification is derived from the DCE specification with the - kind permission of the OSF (now known as The Open Group). - Information from earlier versions of the DCE specification have been - incorporated into this document. - - - - - - - - - - - - - - -Leach, et al. Standards Track [Page 1] - -RFC 4122 A UUID URN Namespace July 2005 - - -Table of Contents - - 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2. Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3. Namespace Registration Template . . . . . . . . . . . . . . . 3 - 4. Specification . . . . . . . . . . . . . . . . . . . . . . . . 5 - 4.1. Format. . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 4.1.1. Variant. . . . . . . . . . . . . . . . . . . . . . 6 - 4.1.2. Layout and Byte Order. . . . . . . . . . . . . . . 6 - 4.1.3. Version. . . . . . . . . . . . . . . . . . . . . . 7 - 4.1.4. Timestamp. . . . . . . . . . . . . . . . . . . . . 8 - 4.1.5. Clock Sequence . . . . . . . . . . . . . . . . . . 8 - 4.1.6. Node . . . . . . . . . . . . . . . . . . . . . . . 9 - 4.1.7. Nil UUID . . . . . . . . . . . . . . . . . . . . . 9 - 4.2. Algorithms for Creating a Time-Based UUID . . . . . . . . 9 - 4.2.1. Basic Algorithm. . . . . . . . . . . . . . . . . . 10 - 4.2.2. Generation Details . . . . . . . . . . . . . . . . 12 - 4.3. Algorithm for Creating a Name-Based UUID. . . . . . . . . 13 - 4.4. Algorithms for Creating a UUID from Truly Random or - Pseudo-Random Numbers . . . . . . . . . . . . . . . . . . 14 - 4.5. Node IDs that Do Not Identify the Host. . . . . . . . . . 15 - 5. Community Considerations . . . . . . . . . . . . . . . . . . . 15 - 6. Security Considerations . . . . . . . . . . . . . . . . . . . 16 - 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 16 - 8. Normative References . . . . . . . . . . . . . . . . . . . . . 16 - A. Appendix A - Sample Implementation . . . . . . . . . . . . . . 18 - B. Appendix B - Sample Output of utest . . . . . . . . . . . . . 29 - C. Appendix C - Some Name Space IDs . . . . . . . . . . . . . . . 30 - -1. Introduction - - This specification defines a Uniform Resource Name namespace for - UUIDs (Universally Unique IDentifier), also known as GUIDs (Globally - Unique IDentifier). A UUID is 128 bits long, and requires no central - registration process. - - The information here is meant to be a concise guide for those wishing - to implement services using UUIDs as URNs. Nothing in this document - should be construed to override the DCE standards that defined UUIDs. - - There is an ITU-T Recommendation and ISO/IEC Standard [3] that are - derived from earlier versions of this document. Both sets of - specifications have been aligned, and are fully technically - compatible. In addition, a global registration function is being - provided by the Telecommunications Standardisation Bureau of ITU-T; - for details see . - - - - - -Leach, et al. Standards Track [Page 2] - -RFC 4122 A UUID URN Namespace July 2005 - - -2. Motivation - - One of the main reasons for using UUIDs is that no centralized - authority is required to administer them (although one format uses - IEEE 802 node identifiers, others do not). As a result, generation - on demand can be completely automated, and used for a variety of - purposes. The UUID generation algorithm described here supports very - high allocation rates of up to 10 million per second per machine if - necessary, so that they could even be used as transaction IDs. - - UUIDs are of a fixed size (128 bits) which is reasonably small - compared to other alternatives. This lends itself well to sorting, - ordering, and hashing of all sorts, storing in databases, simple - allocation, and ease of programming in general. - - Since UUIDs are unique and persistent, they make excellent Uniform - Resource Names. The unique ability to generate a new UUID without a - registration process allows for UUIDs to be one of the URNs with the - lowest minting cost. - -3. Namespace Registration Template - - Namespace ID: UUID - Registration Information: - Registration date: 2003-10-01 - - Declared registrant of the namespace: - JTC 1/SC6 (ASN.1 Rapporteur Group) - - Declaration of syntactic structure: - A UUID is an identifier that is unique across both space and time, - with respect to the space of all UUIDs. Since a UUID is a fixed - size and contains a time field, it is possible for values to - rollover (around A.D. 3400, depending on the specific algorithm - used). A UUID can be used for multiple purposes, from tagging - objects with an extremely short lifetime, to reliably identifying - very persistent objects across a network. - - The internal representation of a UUID is a specific sequence of - bits in memory, as described in Section 4. To accurately - represent a UUID as a URN, it is necessary to convert the bit - sequence to a string representation. - - Each field is treated as an integer and has its value printed as a - zero-filled hexadecimal digit string with the most significant - digit first. The hexadecimal values "a" through "f" are output as - lower case characters and are case insensitive on input. - - - - -Leach, et al. Standards Track [Page 3] - -RFC 4122 A UUID URN Namespace July 2005 - - - The formal definition of the UUID string representation is - provided by the following ABNF [7]: - - UUID = time-low "-" time-mid "-" - time-high-and-version "-" - clock-seq-and-reserved - clock-seq-low "-" node - time-low = 4hexOctet - time-mid = 2hexOctet - time-high-and-version = 2hexOctet - clock-seq-and-reserved = hexOctet - clock-seq-low = hexOctet - node = 6hexOctet - hexOctet = hexDigit hexDigit - hexDigit = - "0" / "1" / "2" / "3" / "4" / "5" / "6" / "7" / "8" / "9" / - "a" / "b" / "c" / "d" / "e" / "f" / - "A" / "B" / "C" / "D" / "E" / "F" - - The following is an example of the string representation of a UUID as - a URN: - - urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6 - - Relevant ancillary documentation: - [1][2] - Identifier uniqueness considerations: - This document specifies three algorithms to generate UUIDs: the - first leverages the unique values of 802 MAC addresses to - guarantee uniqueness, the second uses pseudo-random number - generators, and the third uses cryptographic hashing and - application-provided text strings. As a result, the UUIDs - generated according to the mechanisms here will be unique from all - other UUIDs that have been or will be assigned. - - Identifier persistence considerations: - UUIDs are inherently very difficult to resolve in a global sense. - This, coupled with the fact that UUIDs are temporally unique - within their spatial context, ensures that UUIDs will remain as - persistent as possible. - - Process of identifier assignment: - Generating a UUID does not require that a registration authority - be contacted. One algorithm requires a unique value over space - for each generator. This value is typically an IEEE 802 MAC - address, usually already available on network-connected hosts. - The address can be assigned from an address block obtained from - the IEEE registration authority. If no such address is available, - - - -Leach, et al. Standards Track [Page 4] - -RFC 4122 A UUID URN Namespace July 2005 - - - or privacy concerns make its use undesirable, Section 4.5 - specifies two alternatives. Another approach is to use version 3 - or version 4 UUIDs as defined below. - - Process for identifier resolution: - Since UUIDs are not globally resolvable, this is not applicable. - - Rules for Lexical Equivalence: - Consider each field of the UUID to be an unsigned integer as shown - in the table in section Section 4.1.2. Then, to compare a pair of - UUIDs, arithmetically compare the corresponding fields from each - UUID in order of significance and according to their data type. - Two UUIDs are equal if and only if all the corresponding fields - are equal. - - As an implementation note, equality comparison can be performed on - many systems by doing the appropriate byte-order canonicalization, - and then treating the two UUIDs as 128-bit unsigned integers. - - UUIDs, as defined in this document, can also be ordered - lexicographically. For a pair of UUIDs, the first one follows the - second if the most significant field in which the UUIDs differ is - greater for the first UUID. The second precedes the first if the - most significant field in which the UUIDs differ is greater for - the second UUID. - - Conformance with URN Syntax: - The string representation of a UUID is fully compatible with the - URN syntax. When converting from a bit-oriented, in-memory - representation of a UUID into a URN, care must be taken to - strictly adhere to the byte order issues mentioned in the string - representation section. - - Validation mechanism: - Apart from determining whether the timestamp portion of the UUID - is in the future and therefore not yet assignable, there is no - mechanism for determining whether a UUID is 'valid'. - - Scope: - UUIDs are global in scope. - -4. Specification - -4.1. Format - - The UUID format is 16 octets; some bits of the eight octet variant - field specified below determine finer structure. - - - - -Leach, et al. Standards Track [Page 5] - -RFC 4122 A UUID URN Namespace July 2005 - - -4.1.1. Variant - - The variant field determines the layout of the UUID. That is, the - interpretation of all other bits in the UUID depends on the setting - of the bits in the variant field. As such, it could more accurately - be called a type field; we retain the original term for - compatibility. The variant field consists of a variable number of - the most significant bits of octet 8 of the UUID. - - The following table lists the contents of the variant field, where - the letter "x" indicates a "don't-care" value. - - Msb0 Msb1 Msb2 Description - - 0 x x Reserved, NCS backward compatibility. - - 1 0 x The variant specified in this document. - - 1 1 0 Reserved, Microsoft Corporation backward - compatibility - - 1 1 1 Reserved for future definition. - - Interoperability, in any form, with variants other than the one - defined here is not guaranteed, and is not likely to be an issue in - practice. - -4.1.2. Layout and Byte Order - - To minimize confusion about bit assignments within octets, the UUID - record definition is defined only in terms of fields that are - integral numbers of octets. The fields are presented with the most - significant one first. - - Field Data Type Octet Note - # - - time_low unsigned 32 0-3 The low field of the - bit integer timestamp - - time_mid unsigned 16 4-5 The middle field of the - bit integer timestamp - - time_hi_and_version unsigned 16 6-7 The high field of the - bit integer timestamp multiplexed - with the version number - - - - - -Leach, et al. Standards Track [Page 6] - -RFC 4122 A UUID URN Namespace July 2005 - - - clock_seq_hi_and_rese unsigned 8 8 The high field of the - rved bit integer clock sequence - multiplexed with the - variant - - clock_seq_low unsigned 8 9 The low field of the - bit integer clock sequence - - node unsigned 48 10-15 The spatially unique - bit integer node identifier - - In the absence of explicit application or presentation protocol - specification to the contrary, a UUID is encoded as a 128-bit object, - as follows: - - The fields are encoded as 16 octets, with the sizes and order of the - fields defined above, and with each field encoded with the Most - Significant Byte first (known as network byte order). Note that the - field names, particularly for multiplexed fields, follow historical - practice. - - 0 1 2 3 - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | time_low | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | time_mid | time_hi_and_version | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - |clk_seq_hi_res | clk_seq_low | node (0-1) | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | node (2-5) | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - -4.1.3. Version - - The version number is in the most significant 4 bits of the time - stamp (bits 4 through 7 of the time_hi_and_version field). - - The following table lists the currently-defined versions for this - UUID variant. - - Msb0 Msb1 Msb2 Msb3 Version Description - - 0 0 0 1 1 The time-based version - specified in this document. - - 0 0 1 0 2 DCE Security version, with - embedded POSIX UIDs. - - - -Leach, et al. Standards Track [Page 7] - -RFC 4122 A UUID URN Namespace July 2005 - - - 0 0 1 1 3 The name-based version - specified in this document - that uses MD5 hashing. - - 0 1 0 0 4 The randomly or pseudo- - randomly generated version - specified in this document. - - 0 1 0 1 5 The name-based version - specified in this document - that uses SHA-1 hashing. - - The version is more accurately a sub-type; again, we retain the term - for compatibility. - -4.1.4. Timestamp - - The timestamp is a 60-bit value. For UUID version 1, this is - represented by Coordinated Universal Time (UTC) as a count of 100- - nanosecond intervals since 00:00:00.00, 15 October 1582 (the date of - Gregorian reform to the Christian calendar). - - For systems that do not have UTC available, but do have the local - time, they may use that instead of UTC, as long as they do so - consistently throughout the system. However, this is not recommended - since generating the UTC from local time only needs a time zone - offset. - - For UUID version 3 or 5, the timestamp is a 60-bit value constructed - from a name as described in Section 4.3. - - For UUID version 4, the timestamp is a randomly or pseudo-randomly - generated 60-bit value, as described in Section 4.4. - -4.1.5. Clock Sequence - - For UUID version 1, the clock sequence is used to help avoid - duplicates that could arise when the clock is set backwards in time - or if the node ID changes. - - If the clock is set backwards, or might have been set backwards - (e.g., while the system was powered off), and the UUID generator can - not be sure that no UUIDs were generated with timestamps larger than - the value to which the clock was set, then the clock sequence has to - be changed. If the previous value of the clock sequence is known, it - can just be incremented; otherwise it should be set to a random or - high-quality pseudo-random value. - - - - -Leach, et al. Standards Track [Page 8] - -RFC 4122 A UUID URN Namespace July 2005 - - - Similarly, if the node ID changes (e.g., because a network card has - been moved between machines), setting the clock sequence to a random - number minimizes the probability of a duplicate due to slight - differences in the clock settings of the machines. If the value of - clock sequence associated with the changed node ID were known, then - the clock sequence could just be incremented, but that is unlikely. - - The clock sequence MUST be originally (i.e., once in the lifetime of - a system) initialized to a random number to minimize the correlation - across systems. This provides maximum protection against node - identifiers that may move or switch from system to system rapidly. - The initial value MUST NOT be correlated to the node identifier. - - For UUID version 3 or 5, the clock sequence is a 14-bit value - constructed from a name as described in Section 4.3. - - For UUID version 4, clock sequence is a randomly or pseudo-randomly - generated 14-bit value as described in Section 4.4. - -4.1.6. Node - - For UUID version 1, the node field consists of an IEEE 802 MAC - address, usually the host address. For systems with multiple IEEE - 802 addresses, any available one can be used. The lowest addressed - octet (octet number 10) contains the global/local bit and the - unicast/multicast bit, and is the first octet of the address - transmitted on an 802.3 LAN. - - For systems with no IEEE address, a randomly or pseudo-randomly - generated value may be used; see Section 4.5. The multicast bit must - be set in such addresses, in order that they will never conflict with - addresses obtained from network cards. - - For UUID version 3 or 5, the node field is a 48-bit value constructed - from a name as described in Section 4.3. - - For UUID version 4, the node field is a randomly or pseudo-randomly - generated 48-bit value as described in Section 4.4. - -4.1.7. Nil UUID - - The nil UUID is special form of UUID that is specified to have all - 128 bits set to zero. - -4.2. Algorithms for Creating a Time-Based UUID - - Various aspects of the algorithm for creating a version 1 UUID are - discussed in the following sections. - - - -Leach, et al. Standards Track [Page 9] - -RFC 4122 A UUID URN Namespace July 2005 - - -4.2.1. Basic Algorithm - - The following algorithm is simple, correct, and inefficient: - - o Obtain a system-wide global lock - - o From a system-wide shared stable store (e.g., a file), read the - UUID generator state: the values of the timestamp, clock sequence, - and node ID used to generate the last UUID. - - o Get the current time as a 60-bit count of 100-nanosecond intervals - since 00:00:00.00, 15 October 1582. - - o Get the current node ID. - - o If the state was unavailable (e.g., non-existent or corrupted), or - the saved node ID is different than the current node ID, generate - a random clock sequence value. - - o If the state was available, but the saved timestamp is later than - the current timestamp, increment the clock sequence value. - - o Save the state (current timestamp, clock sequence, and node ID) - back to the stable store. - - o Release the global lock. - - o Format a UUID from the current timestamp, clock sequence, and node - ID values according to the steps in Section 4.2.2. - - If UUIDs do not need to be frequently generated, the above algorithm - may be perfectly adequate. For higher performance requirements, - however, issues with the basic algorithm include: - - o Reading the state from stable storage each time is inefficient. - - o The resolution of the system clock may not be 100-nanoseconds. - - o Writing the state to stable storage each time is inefficient. - - o Sharing the state across process boundaries may be inefficient. - - Each of these issues can be addressed in a modular fashion by local - improvements in the functions that read and write the state and read - the clock. We address each of them in turn in the following - sections. - - - - - -Leach, et al. Standards Track [Page 10] - -RFC 4122 A UUID URN Namespace July 2005 - - -4.2.1.1. Reading Stable Storage - - The state only needs to be read from stable storage once at boot - time, if it is read into a system-wide shared volatile store (and - updated whenever the stable store is updated). - - If an implementation does not have any stable store available, then - it can always say that the values were unavailable. This is the - least desirable implementation because it will increase the frequency - of creation of new clock sequence numbers, which increases the - probability of duplicates. - - If the node ID can never change (e.g., the net card is inseparable - from the system), or if any change also reinitializes the clock - sequence to a random value, then instead of keeping it in stable - store, the current node ID may be returned. - -4.2.1.2. System Clock Resolution - - The timestamp is generated from the system time, whose resolution may - be less than the resolution of the UUID timestamp. - - If UUIDs do not need to be frequently generated, the timestamp can - simply be the system time multiplied by the number of 100-nanosecond - intervals per system time interval. - - If a system overruns the generator by requesting too many UUIDs - within a single system time interval, the UUID service MUST either - return an error, or stall the UUID generator until the system clock - catches up. - - A high resolution timestamp can be simulated by keeping a count of - the number of UUIDs that have been generated with the same value of - the system time, and using it to construct the low order bits of the - timestamp. The count will range between zero and the number of - 100-nanosecond intervals per system time interval. - - Note: If the processors overrun the UUID generation frequently, - additional node identifiers can be allocated to the system, which - will permit higher speed allocation by making multiple UUIDs - potentially available for each time stamp value. - -4.2.1.3. Writing Stable Storage - - The state does not always need to be written to stable store every - time a UUID is generated. The timestamp in the stable store can be - periodically set to a value larger than any yet used in a UUID. As - long as the generated UUIDs have timestamps less than that value, and - - - -Leach, et al. Standards Track [Page 11] - -RFC 4122 A UUID URN Namespace July 2005 - - - the clock sequence and node ID remain unchanged, only the shared - volatile copy of the state needs to be updated. Furthermore, if the - timestamp value in stable store is in the future by less than the - typical time it takes the system to reboot, a crash will not cause a - reinitialization of the clock sequence. - -4.2.1.4. Sharing State Across Processes - - If it is too expensive to access shared state each time a UUID is - generated, then the system-wide generator can be implemented to - allocate a block of time stamps each time it is called; a per- - process generator can allocate from that block until it is exhausted. - -4.2.2. Generation Details - - Version 1 UUIDs are generated according to the following algorithm: - - o Determine the values for the UTC-based timestamp and clock - sequence to be used in the UUID, as described in Section 4.2.1. - - o For the purposes of this algorithm, consider the timestamp to be a - 60-bit unsigned integer and the clock sequence to be a 14-bit - unsigned integer. Sequentially number the bits in a field, - starting with zero for the least significant bit. - - o Set the time_low field equal to the least significant 32 bits - (bits zero through 31) of the timestamp in the same order of - significance. - - o Set the time_mid field equal to bits 32 through 47 from the - timestamp in the same order of significance. - - o Set the 12 least significant bits (bits zero through 11) of the - time_hi_and_version field equal to bits 48 through 59 from the - timestamp in the same order of significance. - - o Set the four most significant bits (bits 12 through 15) of the - time_hi_and_version field to the 4-bit version number - corresponding to the UUID version being created, as shown in the - table above. - - o Set the clock_seq_low field to the eight least significant bits - (bits zero through 7) of the clock sequence in the same order of - significance. - - - - - - - -Leach, et al. Standards Track [Page 12] - -RFC 4122 A UUID URN Namespace July 2005 - - - o Set the 6 least significant bits (bits zero through 5) of the - clock_seq_hi_and_reserved field to the 6 most significant bits - (bits 8 through 13) of the clock sequence in the same order of - significance. - - o Set the two most significant bits (bits 6 and 7) of the - clock_seq_hi_and_reserved to zero and one, respectively. - - o Set the node field to the 48-bit IEEE address in the same order of - significance as the address. - -4.3. Algorithm for Creating a Name-Based UUID - - The version 3 or 5 UUID is meant for generating UUIDs from "names" - that are drawn from, and unique within, some "name space". The - concept of name and name space should be broadly construed, and not - limited to textual names. For example, some name spaces are the - domain name system, URLs, ISO Object IDs (OIDs), X.500 Distinguished - Names (DNs), and reserved words in a programming language. The - mechanisms or conventions used for allocating names and ensuring - their uniqueness within their name spaces are beyond the scope of - this specification. - - The requirements for these types of UUIDs are as follows: - - o The UUIDs generated at different times from the same name in the - same namespace MUST be equal. - - o The UUIDs generated from two different names in the same namespace - should be different (with very high probability). - - o The UUIDs generated from the same name in two different namespaces - should be different with (very high probability). - - o If two UUIDs that were generated from names are equal, then they - were generated from the same name in the same namespace (with very - high probability). - - The algorithm for generating a UUID from a name and a name space are - as follows: - - o Allocate a UUID to use as a "name space ID" for all UUIDs - generated from names in that name space; see Appendix C for some - pre-defined values. - - o Choose either MD5 [4] or SHA-1 [8] as the hash algorithm; If - backward compatibility is not an issue, SHA-1 is preferred. - - - - -Leach, et al. Standards Track [Page 13] - -RFC 4122 A UUID URN Namespace July 2005 - - - o Convert the name to a canonical sequence of octets (as defined by - the standards or conventions of its name space); put the name - space ID in network byte order. - - o Compute the hash of the name space ID concatenated with the name. - - o Set octets zero through 3 of the time_low field to octets zero - through 3 of the hash. - - o Set octets zero and one of the time_mid field to octets 4 and 5 of - the hash. - - o Set octets zero and one of the time_hi_and_version field to octets - 6 and 7 of the hash. - - o Set the four most significant bits (bits 12 through 15) of the - time_hi_and_version field to the appropriate 4-bit version number - from Section 4.1.3. - - o Set the clock_seq_hi_and_reserved field to octet 8 of the hash. - - o Set the two most significant bits (bits 6 and 7) of the - clock_seq_hi_and_reserved to zero and one, respectively. - - o Set the clock_seq_low field to octet 9 of the hash. - - o Set octets zero through five of the node field to octets 10 - through 15 of the hash. - - o Convert the resulting UUID to local byte order. - -4.4. Algorithms for Creating a UUID from Truly Random or - Pseudo-Random Numbers - - The version 4 UUID is meant for generating UUIDs from truly-random or - pseudo-random numbers. - - The algorithm is as follows: - - o Set the two most significant bits (bits 6 and 7) of the - clock_seq_hi_and_reserved to zero and one, respectively. - - o Set the four most significant bits (bits 12 through 15) of the - time_hi_and_version field to the 4-bit version number from - Section 4.1.3. - - o Set all the other bits to randomly (or pseudo-randomly) chosen - values. - - - -Leach, et al. Standards Track [Page 14] - -RFC 4122 A UUID URN Namespace July 2005 - - - See Section 4.5 for a discussion on random numbers. - -4.5. Node IDs that Do Not Identify the Host - - This section describes how to generate a version 1 UUID if an IEEE - 802 address is not available, or its use is not desired. - - One approach is to contact the IEEE and get a separate block of - addresses. At the time of writing, the application could be found at - , and the cost - was US$550. - - A better solution is to obtain a 47-bit cryptographic quality random - number and use it as the low 47 bits of the node ID, with the least - significant bit of the first octet of the node ID set to one. This - bit is the unicast/multicast bit, which will never be set in IEEE 802 - addresses obtained from network cards. Hence, there can never be a - conflict between UUIDs generated by machines with and without network - cards. (Recall that the IEEE 802 spec talks about transmission - order, which is the opposite of the in-memory representation that is - discussed in this document.) - - For compatibility with earlier specifications, note that this - document uses the unicast/multicast bit, instead of the arguably more - correct local/global bit. - - Advice on generating cryptographic-quality random numbers can be - found in RFC1750 [5]. - - In addition, items such as the computer's name and the name of the - operating system, while not strictly speaking random, will help - differentiate the results from those obtained by other systems. - - The exact algorithm to generate a node ID using these data is system - specific, because both the data available and the functions to obtain - them are often very system specific. A generic approach, however, is - to accumulate as many sources as possible into a buffer, use a - message digest such as MD5 [4] or SHA-1 [8], take an arbitrary 6 - bytes from the hash value, and set the multicast bit as described - above. - -5. Community Considerations - - The use of UUIDs is extremely pervasive in computing. They comprise - the core identifier infrastructure for many operating systems - (Microsoft Windows) and applications (the Mozilla browser) and in - many cases, become exposed to the Web in many non-standard ways. - - - - -Leach, et al. Standards Track [Page 15] - -RFC 4122 A UUID URN Namespace July 2005 - - - This specification attempts to standardize that practice as openly as - possible and in a way that attempts to benefit the entire Internet. - -6. Security Considerations - - Do not assume that UUIDs are hard to guess; they should not be used - as security capabilities (identifiers whose mere possession grants - access), for example. A predictable random number source will - exacerbate the situation. - - Do not assume that it is easy to determine if a UUID has been - slightly transposed in order to redirect a reference to another - object. Humans do not have the ability to easily check the integrity - of a UUID by simply glancing at it. - - Distributed applications generating UUIDs at a variety of hosts must - be willing to rely on the random number source at all hosts. If this - is not feasible, the namespace variant should be used. - -7. Acknowledgments - - This document draws heavily on the OSF DCE specification for UUIDs. - Ted Ts'o provided helpful comments, especially on the byte ordering - section which we mostly plagiarized from a proposed wording he - supplied (all errors in that section are our responsibility, - however). - - We are also grateful to the careful reading and bit-twiddling of Ralf - S. Engelschall, John Larmouth, and Paul Thorpe. Professor Larmouth - was also invaluable in achieving coordination with ISO/IEC. - -8. Normative References - - [1] Zahn, L., Dineen, T., and P. Leach, "Network Computing - Architecture", ISBN 0-13-611674-4, January 1990. - - [2] "DCE: Remote Procedure Call", Open Group CAE Specification C309, - ISBN 1-85912-041-5, August 1994. - - [3] ISO/IEC 9834-8:2004 Information Technology, "Procedures for the - operation of OSI Registration Authorities: Generation and - registration of Universally Unique Identifiers (UUIDs) and their - use as ASN.1 Object Identifier components" ITU-T Rec. X.667, - 2004. - - [4] Rivest, R., "The MD5 Message-Digest Algorithm ", RFC 1321, April - 1992. - - - - -Leach, et al. Standards Track [Page 16] - -RFC 4122 A UUID URN Namespace July 2005 - - - [5] Eastlake, D., 3rd, Schiller, J., and S. Crocker, "Randomness - Requirements for Security", BCP 106, RFC 4086, June 2005. - - [6] Moats, R., "URN Syntax", RFC 2141, May 1997. - - [7] Crocker, D. and P. Overell, "Augmented BNF for Syntax - Specifications: ABNF", RFC 2234, November 1997. - - [8] National Institute of Standards and Technology, "Secure Hash - Standard", FIPS PUB 180-1, April 1995, - . - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Leach, et al. Standards Track [Page 17] - -RFC 4122 A UUID URN Namespace July 2005 - - -Appendix A. Appendix A - Sample Implementation - - This implementation consists of 5 files: uuid.h, uuid.c, sysdep.h, - sysdep.c and utest.c. The uuid.* files are the system independent - implementation of the UUID generation algorithms described above, - with all the optimizations described above except efficient state - sharing across processes included. The code has been tested on Linux - (Red Hat 4.0) with GCC (2.7.2), and Windows NT 4.0 with VC++ 5.0. - The code assumes 64-bit integer support, which makes it much clearer. - - All the following source files should have the following copyright - notice included: - -copyrt.h - -/* -** Copyright (c) 1990- 1993, 1996 Open Software Foundation, Inc. -** Copyright (c) 1989 by Hewlett-Packard Company, Palo Alto, Ca. & -** Digital Equipment Corporation, Maynard, Mass. -** Copyright (c) 1998 Microsoft. -** To anyone who acknowledges that this file is provided "AS IS" -** without any express or implied warranty: permission to use, copy, -** modify, and distribute this file for any purpose is hereby -** granted without fee, provided that the above copyright notices and -** this notice appears in all source code copies, and that none of -** the names of Open Software Foundation, Inc., Hewlett-Packard -** Company, Microsoft, or Digital Equipment Corporation be used in -** advertising or publicity pertaining to distribution of the software -** without specific, written prior permission. Neither Open Software -** Foundation, Inc., Hewlett-Packard Company, Microsoft, nor Digital -** Equipment Corporation makes any representations about the -** suitability of this software for any purpose. -*/ - - -uuid.h - -#include "copyrt.h" -#undef uuid_t -typedef struct { - unsigned32 time_low; - unsigned16 time_mid; - unsigned16 time_hi_and_version; - unsigned8 clock_seq_hi_and_reserved; - unsigned8 clock_seq_low; - byte node[6]; -} uuid_t; - - - - -Leach, et al. Standards Track [Page 18] - -RFC 4122 A UUID URN Namespace July 2005 - - -/* uuid_create -- generate a UUID */ -int uuid_create(uuid_t * uuid); - -/* uuid_create_md5_from_name -- create a version 3 (MD5) UUID using a - "name" from a "name space" */ -void uuid_create_md5_from_name( - uuid_t *uuid, /* resulting UUID */ - uuid_t nsid, /* UUID of the namespace */ - void *name, /* the name from which to generate a UUID */ - int namelen /* the length of the name */ -); - -/* uuid_create_sha1_from_name -- create a version 5 (SHA-1) UUID - using a "name" from a "name space" */ -void uuid_create_sha1_from_name( - - uuid_t *uuid, /* resulting UUID */ - uuid_t nsid, /* UUID of the namespace */ - void *name, /* the name from which to generate a UUID */ - int namelen /* the length of the name */ -); - -/* uuid_compare -- Compare two UUID's "lexically" and return - -1 u1 is lexically before u2 - 0 u1 is equal to u2 - 1 u1 is lexically after u2 - Note that lexical ordering is not temporal ordering! -*/ -int uuid_compare(uuid_t *u1, uuid_t *u2); - - -uuid.c - -#include "copyrt.h" -#include -#include -#include -#include -#include "sysdep.h" -#include "uuid.h" - -/* various forward declarations */ -static int read_state(unsigned16 *clockseq, uuid_time_t *timestamp, - uuid_node_t *node); -static void write_state(unsigned16 clockseq, uuid_time_t timestamp, - uuid_node_t node); -static void format_uuid_v1(uuid_t *uuid, unsigned16 clockseq, - uuid_time_t timestamp, uuid_node_t node); - - - -Leach, et al. Standards Track [Page 19] - -RFC 4122 A UUID URN Namespace July 2005 - - -static void format_uuid_v3or5(uuid_t *uuid, unsigned char hash[16], - int v); -static void get_current_time(uuid_time_t *timestamp); -static unsigned16 true_random(void); - -/* uuid_create -- generator a UUID */ -int uuid_create(uuid_t *uuid) -{ - uuid_time_t timestamp, last_time; - unsigned16 clockseq; - uuid_node_t node; - uuid_node_t last_node; - int f; - - /* acquire system-wide lock so we're alone */ - LOCK; - /* get time, node ID, saved state from non-volatile storage */ - get_current_time(×tamp); - get_ieee_node_identifier(&node); - f = read_state(&clockseq, &last_time, &last_node); - - /* if no NV state, or if clock went backwards, or node ID - changed (e.g., new network card) change clockseq */ - if (!f || memcmp(&node, &last_node, sizeof node)) - clockseq = true_random(); - else if (timestamp < last_time) - clockseq++; - - /* save the state for next time */ - write_state(clockseq, timestamp, node); - - UNLOCK; - - /* stuff fields into the UUID */ - format_uuid_v1(uuid, clockseq, timestamp, node); - return 1; -} - -/* format_uuid_v1 -- make a UUID from the timestamp, clockseq, - and node ID */ -void format_uuid_v1(uuid_t* uuid, unsigned16 clock_seq, - uuid_time_t timestamp, uuid_node_t node) -{ - /* Construct a version 1 uuid with the information we've gathered - plus a few constants. */ - uuid->time_low = (unsigned long)(timestamp & 0xFFFFFFFF); - uuid->time_mid = (unsigned short)((timestamp >> 32) & 0xFFFF); - uuid->time_hi_and_version = - - - -Leach, et al. Standards Track [Page 20] - -RFC 4122 A UUID URN Namespace July 2005 - - - (unsigned short)((timestamp >> 48) & 0x0FFF); - uuid->time_hi_and_version |= (1 << 12); - uuid->clock_seq_low = clock_seq & 0xFF; - uuid->clock_seq_hi_and_reserved = (clock_seq & 0x3F00) >> 8; - uuid->clock_seq_hi_and_reserved |= 0x80; - memcpy(&uuid->node, &node, sizeof uuid->node); -} - -/* data type for UUID generator persistent state */ -typedef struct { - uuid_time_t ts; /* saved timestamp */ - uuid_node_t node; /* saved node ID */ - unsigned16 cs; /* saved clock sequence */ -} uuid_state; - -static uuid_state st; - -/* read_state -- read UUID generator state from non-volatile store */ -int read_state(unsigned16 *clockseq, uuid_time_t *timestamp, - uuid_node_t *node) -{ - static int inited = 0; - FILE *fp; - - /* only need to read state once per boot */ - if (!inited) { - fp = fopen("state", "rb"); - if (fp == NULL) - return 0; - fread(&st, sizeof st, 1, fp); - fclose(fp); - inited = 1; - } - *clockseq = st.cs; - *timestamp = st.ts; - *node = st.node; - return 1; -} - -/* write_state -- save UUID generator state back to non-volatile - storage */ -void write_state(unsigned16 clockseq, uuid_time_t timestamp, - uuid_node_t node) -{ - static int inited = 0; - static uuid_time_t next_save; - FILE* fp; - - - - -Leach, et al. Standards Track [Page 21] - -RFC 4122 A UUID URN Namespace July 2005 - - - if (!inited) { - next_save = timestamp; - inited = 1; - } - - /* always save state to volatile shared state */ - st.cs = clockseq; - st.ts = timestamp; - st.node = node; - if (timestamp >= next_save) { - fp = fopen("state", "wb"); - fwrite(&st, sizeof st, 1, fp); - fclose(fp); - /* schedule next save for 10 seconds from now */ - next_save = timestamp + (10 * 10 * 1000 * 1000); - } -} - -/* get-current_time -- get time as 60-bit 100ns ticks since UUID epoch. - Compensate for the fact that real clock resolution is - less than 100ns. */ -void get_current_time(uuid_time_t *timestamp) -{ - static int inited = 0; - static uuid_time_t time_last; - static unsigned16 uuids_this_tick; - uuid_time_t time_now; - - if (!inited) { - get_system_time(&time_now); - uuids_this_tick = UUIDS_PER_TICK; - inited = 1; - } - - for ( ; ; ) { - get_system_time(&time_now); - - /* if clock reading changed since last UUID generated, */ - if (time_last != time_now) { - /* reset count of uuids gen'd with this clock reading */ - uuids_this_tick = 0; - time_last = time_now; - break; - } - if (uuids_this_tick < UUIDS_PER_TICK) { - uuids_this_tick++; - break; - } - - - -Leach, et al. Standards Track [Page 22] - -RFC 4122 A UUID URN Namespace July 2005 - - - /* going too fast for our clock; spin */ - } - /* add the count of uuids to low order bits of the clock reading */ - *timestamp = time_now + uuids_this_tick; -} - -/* true_random -- generate a crypto-quality random number. - **This sample doesn't do that.** */ -static unsigned16 true_random(void) -{ - static int inited = 0; - uuid_time_t time_now; - - if (!inited) { - get_system_time(&time_now); - time_now = time_now / UUIDS_PER_TICK; - srand((unsigned int) - (((time_now >> 32) ^ time_now) & 0xffffffff)); - inited = 1; - } - - return rand(); -} - -/* uuid_create_md5_from_name -- create a version 3 (MD5) UUID using a - "name" from a "name space" */ -void uuid_create_md5_from_name(uuid_t *uuid, uuid_t nsid, void *name, - int namelen) -{ - MD5_CTX c; - unsigned char hash[16]; - uuid_t net_nsid; - - /* put name space ID in network byte order so it hashes the same - no matter what endian machine we're on */ - net_nsid = nsid; - net_nsid.time_low = htonl(net_nsid.time_low); - net_nsid.time_mid = htons(net_nsid.time_mid); - net_nsid.time_hi_and_version = htons(net_nsid.time_hi_and_version); - - MD5Init(&c); - MD5Update(&c, &net_nsid, sizeof net_nsid); - MD5Update(&c, name, namelen); - MD5Final(hash, &c); - - /* the hash is in network byte order at this point */ - format_uuid_v3or5(uuid, hash, 3); -} - - - -Leach, et al. Standards Track [Page 23] - -RFC 4122 A UUID URN Namespace July 2005 - - -void uuid_create_sha1_from_name(uuid_t *uuid, uuid_t nsid, void *name, - int namelen) -{ - SHA_CTX c; - unsigned char hash[20]; - uuid_t net_nsid; - - /* put name space ID in network byte order so it hashes the same - no matter what endian machine we're on */ - net_nsid = nsid; - net_nsid.time_low = htonl(net_nsid.time_low); - net_nsid.time_mid = htons(net_nsid.time_mid); - net_nsid.time_hi_and_version = htons(net_nsid.time_hi_and_version); - - SHA1_Init(&c); - SHA1_Update(&c, &net_nsid, sizeof net_nsid); - SHA1_Update(&c, name, namelen); - SHA1_Final(hash, &c); - - /* the hash is in network byte order at this point */ - format_uuid_v3or5(uuid, hash, 5); -} - -/* format_uuid_v3or5 -- make a UUID from a (pseudo)random 128-bit - number */ -void format_uuid_v3or5(uuid_t *uuid, unsigned char hash[16], int v) -{ - /* convert UUID to local byte order */ - memcpy(uuid, hash, sizeof *uuid); - uuid->time_low = ntohl(uuid->time_low); - uuid->time_mid = ntohs(uuid->time_mid); - uuid->time_hi_and_version = ntohs(uuid->time_hi_and_version); - - /* put in the variant and version bits */ - uuid->time_hi_and_version &= 0x0FFF; - uuid->time_hi_and_version |= (v << 12); - uuid->clock_seq_hi_and_reserved &= 0x3F; - uuid->clock_seq_hi_and_reserved |= 0x80; -} - -/* uuid_compare -- Compare two UUID's "lexically" and return */ -#define CHECK(f1, f2) if (f1 != f2) return f1 < f2 ? -1 : 1; -int uuid_compare(uuid_t *u1, uuid_t *u2) -{ - int i; - - CHECK(u1->time_low, u2->time_low); - CHECK(u1->time_mid, u2->time_mid); - - - -Leach, et al. Standards Track [Page 24] - -RFC 4122 A UUID URN Namespace July 2005 - - - CHECK(u1->time_hi_and_version, u2->time_hi_and_version); - CHECK(u1->clock_seq_hi_and_reserved, u2->clock_seq_hi_and_reserved); - CHECK(u1->clock_seq_low, u2->clock_seq_low) - for (i = 0; i < 6; i++) { - if (u1->node[i] < u2->node[i]) - return -1; - if (u1->node[i] > u2->node[i]) - return 1; - } - return 0; -} -#undef CHECK - - -sysdep.h - -#include "copyrt.h" -/* remove the following define if you aren't running WIN32 */ -#define WININC 0 - -#ifdef WININC -#include -#else -#include -#include -#include -#endif - -#include "global.h" -/* change to point to where MD5 .h's live; RFC 1321 has sample - implementation */ -#include "md5.h" - -/* set the following to the number of 100ns ticks of the actual - resolution of your system's clock */ -#define UUIDS_PER_TICK 1024 - -/* Set the following to a calls to get and release a global lock */ -#define LOCK -#define UNLOCK - -typedef unsigned long unsigned32; -typedef unsigned short unsigned16; -typedef unsigned char unsigned8; -typedef unsigned char byte; - -/* Set this to what your compiler uses for 64-bit data type */ -#ifdef WININC - - - -Leach, et al. Standards Track [Page 25] - -RFC 4122 A UUID URN Namespace July 2005 - - -#define unsigned64_t unsigned __int64 -#define I64(C) C -#else -#define unsigned64_t unsigned long long -#define I64(C) C##LL -#endif - -typedef unsigned64_t uuid_time_t; -typedef struct { - char nodeID[6]; -} uuid_node_t; - -void get_ieee_node_identifier(uuid_node_t *node); -void get_system_time(uuid_time_t *uuid_time); -void get_random_info(char seed[16]); - - -sysdep.c - -#include "copyrt.h" -#include -#include "sysdep.h" - -/* system dependent call to get IEEE node ID. - This sample implementation generates a random node ID. */ -void get_ieee_node_identifier(uuid_node_t *node) -{ - static inited = 0; - static uuid_node_t saved_node; - char seed[16]; - FILE *fp; - - if (!inited) { - fp = fopen("nodeid", "rb"); - if (fp) { - fread(&saved_node, sizeof saved_node, 1, fp); - fclose(fp); - } - else { - get_random_info(seed); - seed[0] |= 0x01; - memcpy(&saved_node, seed, sizeof saved_node); - fp = fopen("nodeid", "wb"); - if (fp) { - fwrite(&saved_node, sizeof saved_node, 1, fp); - fclose(fp); - } - } - - - -Leach, et al. Standards Track [Page 26] - -RFC 4122 A UUID URN Namespace July 2005 - - - inited = 1; - } - - *node = saved_node; -} - -/* system dependent call to get the current system time. Returned as - 100ns ticks since UUID epoch, but resolution may be less than - 100ns. */ -#ifdef _WINDOWS_ - -void get_system_time(uuid_time_t *uuid_time) -{ - ULARGE_INTEGER time; - - /* NT keeps time in FILETIME format which is 100ns ticks since - Jan 1, 1601. UUIDs use time in 100ns ticks since Oct 15, 1582. - The difference is 17 Days in Oct + 30 (Nov) + 31 (Dec) - + 18 years and 5 leap days. */ - GetSystemTimeAsFileTime((FILETIME *)&time); - time.QuadPart += - - (unsigned __int64) (1000*1000*10) // seconds - * (unsigned __int64) (60 * 60 * 24) // days - * (unsigned __int64) (17+30+31+365*18+5); // # of days - *uuid_time = time.QuadPart; -} - -/* Sample code, not for use in production; see RFC 1750 */ -void get_random_info(char seed[16]) -{ - MD5_CTX c; - struct { - MEMORYSTATUS m; - SYSTEM_INFO s; - FILETIME t; - LARGE_INTEGER pc; - DWORD tc; - DWORD l; - char hostname[MAX_COMPUTERNAME_LENGTH + 1]; - } r; - - MD5Init(&c); - GlobalMemoryStatus(&r.m); - GetSystemInfo(&r.s); - GetSystemTimeAsFileTime(&r.t); - QueryPerformanceCounter(&r.pc); - r.tc = GetTickCount(); - - - -Leach, et al. Standards Track [Page 27] - -RFC 4122 A UUID URN Namespace July 2005 - - - r.l = MAX_COMPUTERNAME_LENGTH + 1; - GetComputerName(r.hostname, &r.l); - MD5Update(&c, &r, sizeof r); - MD5Final(seed, &c); -} - -#else - -void get_system_time(uuid_time_t *uuid_time) -{ - struct timeval tp; - - gettimeofday(&tp, (struct timezone *)0); - - /* Offset between UUID formatted times and Unix formatted times. - UUID UTC base time is October 15, 1582. - Unix base time is January 1, 1970.*/ - *uuid_time = ((unsigned64)tp.tv_sec * 10000000) - + ((unsigned64)tp.tv_usec * 10) - + I64(0x01B21DD213814000); -} - -/* Sample code, not for use in production; see RFC 1750 */ -void get_random_info(char seed[16]) -{ - MD5_CTX c; - struct { - struct sysinfo s; - struct timeval t; - char hostname[257]; - } r; - - MD5Init(&c); - sysinfo(&r.s); - gettimeofday(&r.t, (struct timezone *)0); - gethostname(r.hostname, 256); - MD5Update(&c, &r, sizeof r); - MD5Final(seed, &c); -} - -#endif - -utest.c - -#include "copyrt.h" -#include "sysdep.h" -#include -#include "uuid.h" - - - -Leach, et al. Standards Track [Page 28] - -RFC 4122 A UUID URN Namespace July 2005 - - -uuid_t NameSpace_DNS = { /* 6ba7b810-9dad-11d1-80b4-00c04fd430c8 */ - 0x6ba7b810, - 0x9dad, - 0x11d1, - 0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8 -}; - -/* puid -- print a UUID */ -void puid(uuid_t u) -{ - int i; - - printf("%8.8x-%4.4x-%4.4x-%2.2x%2.2x-", u.time_low, u.time_mid, - u.time_hi_and_version, u.clock_seq_hi_and_reserved, - u.clock_seq_low); - for (i = 0; i < 6; i++) - printf("%2.2x", u.node[i]); - printf("\n"); -} - -/* Simple driver for UUID generator */ -void main(int argc, char **argv) -{ - uuid_t u; - int f; - - uuid_create(&u); - printf("uuid_create(): "); puid(u); - - f = uuid_compare(&u, &u); - printf("uuid_compare(u,u): %d\n", f); /* should be 0 */ - f = uuid_compare(&u, &NameSpace_DNS); - printf("uuid_compare(u, NameSpace_DNS): %d\n", f); /* s.b. 1 */ - f = uuid_compare(&NameSpace_DNS, &u); - printf("uuid_compare(NameSpace_DNS, u): %d\n", f); /* s.b. -1 */ - uuid_create_md5_from_name(&u, NameSpace_DNS, "www.widgets.com", 15); - printf("uuid_create_md5_from_name(): "); puid(u); -} - -Appendix B. Appendix B - Sample Output of utest - - uuid_create(): 7d444840-9dc0-11d1-b245-5ffdce74fad2 - uuid_compare(u,u): 0 - uuid_compare(u, NameSpace_DNS): 1 - uuid_compare(NameSpace_DNS, u): -1 - uuid_create_md5_from_name(): e902893a-9d22-3c7e-a7b8-d6e313b71d9f - - - - - -Leach, et al. Standards Track [Page 29] - -RFC 4122 A UUID URN Namespace July 2005 - - -Appendix C. Appendix C - Some Name Space IDs - - This appendix lists the name space IDs for some potentially - interesting name spaces, as initialized C structures and in the - string representation defined above. - - /* Name string is a fully-qualified domain name */ - uuid_t NameSpace_DNS = { /* 6ba7b810-9dad-11d1-80b4-00c04fd430c8 */ - 0x6ba7b810, - 0x9dad, - 0x11d1, - 0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8 - }; - - /* Name string is a URL */ - uuid_t NameSpace_URL = { /* 6ba7b811-9dad-11d1-80b4-00c04fd430c8 */ - 0x6ba7b811, - 0x9dad, - 0x11d1, - 0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8 - }; - - /* Name string is an ISO OID */ - uuid_t NameSpace_OID = { /* 6ba7b812-9dad-11d1-80b4-00c04fd430c8 */ - 0x6ba7b812, - 0x9dad, - 0x11d1, - 0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8 - }; - - /* Name string is an X.500 DN (in DER or a text output format) */ - uuid_t NameSpace_X500 = { /* 6ba7b814-9dad-11d1-80b4-00c04fd430c8 */ - 0x6ba7b814, - 0x9dad, - 0x11d1, - 0x80, 0xb4, 0x00, 0xc0, 0x4f, 0xd4, 0x30, 0xc8 - }; - - - - - - - - - - - - - - -Leach, et al. Standards Track [Page 30] - -RFC 4122 A UUID URN Namespace July 2005 - - -Authors' Addresses - - Paul J. Leach - Microsoft - 1 Microsoft Way - Redmond, WA 98052 - US - - Phone: +1 425-882-8080 - EMail: paulle@microsoft.com - - - Michael Mealling - Refactored Networks, LLC - 1635 Old Hwy 41 - Suite 112, Box 138 - Kennesaw, GA 30152 - US - - Phone: +1-678-581-9656 - EMail: michael@refactored-networks.com - URI: http://www.refactored-networks.com - - - Rich Salz - DataPower Technology, Inc. - 1 Alewife Center - Cambridge, MA 02142 - US - - Phone: +1 617-864-0455 - EMail: rsalz@datapower.com - URI: http://www.datapower.com - - - - - - - - - - - - - - - - - - -Leach, et al. Standards Track [Page 31] - -RFC 4122 A UUID URN Namespace July 2005 - - -Full Copyright Statement - - Copyright (C) The Internet Society (2005). - - This document is subject to the rights, licenses and restrictions - contained in BCP 78, and except as set forth therein, the authors - retain all their rights. - - This document and the information contained herein are provided on an - "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS - OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET - ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, - INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE - INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED - WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. - -Intellectual Property - - The IETF takes no position regarding the validity or scope of any - Intellectual Property Rights or other rights that might be claimed to - pertain to the implementation or use of the technology described in - this document or the extent to which any license under such rights - might or might not be available; nor does it represent that it has - made any independent effort to identify any such rights. Information - on the procedures with respect to rights in RFC documents can be - found in BCP 78 and BCP 79. - - Copies of IPR disclosures made to the IETF Secretariat and any - assurances of licenses to be made available, or the result of an - attempt made to obtain a general license or permission for the use of - such proprietary rights by implementers or users of this - specification can be obtained from the IETF on-line IPR repository at - http://www.ietf.org/ipr. - - The IETF invites any interested party to bring to its attention any - copyrights, patents or patent applications, or other proprietary - rights that may cover technology that may be required to implement - this standard. Please address the information to the IETF at ietf- - ipr@ietf.org. - -Acknowledgement - - Funding for the RFC Editor function is currently provided by the - Internet Society. - - - - - - - -Leach, et al. Standards Track [Page 32] - diff --git a/util/debian.exclude b/util/debian.exclude deleted file mode 100644 index 2be83f10..00000000 --- a/util/debian.exclude +++ /dev/null @@ -1,13 +0,0 @@ -.hg -.hgignore -.pc -patches -README.subset -build -rpm.log -TODO -powerquest -.exclude-file -po/stamp-cat-id -po/cat-id-tbl.c -doc/rfc4122.txt diff --git a/util/gen-tarball.in b/util/gen-tarball.in index 8365df14..8dcaf040 100644 --- a/util/gen-tarball.in +++ b/util/gen-tarball.in @@ -13,11 +13,7 @@ deb_pkgver=`echo @E2FSPROGS_PKGVER@ | sed -e 's/_/-/g'` echo Debian package $deb_pkgver case $1 in - debian) - SRCROOT="e2fsprogs-$deb_pkgver+dfsg" - list=debian - ;; - ubuntu) + debian|ubuntu) SRCROOT="e2fsprogs-$deb_pkgver" list=all ;;