If there are any PREEN_OK problems fixed in check_super_block(), don't
skip checking the full file system.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When pass1 finds blocks that are mapped to multiple files, it will
print every duplicated block. If there are long sequences of
duplicate blocks (e.g. the e_pblk field is wrong in an extent), this
can cause a gigantic flood of output when a range could convey the
same information. Therefore, teach pass1b to print ranges when
possible.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In e2fsck_expand_directory() we don't handle a dir with inline data
because when this function is called the directory inode shouldn't
contains inline data.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously, this message used 8193 as the example alternate
superblock. But for most file systems, the backup superblock is
located at 32768 (since most file systems have a block size of 4k, and
not 1k).
Addresses-Debian-Bug: #719185
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix the e2fsck problem comments to match the actual message printed,
so that it is possible to find the problem code when searching by
the message.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since it's impossible to address all blocks of a 64bit filesystem
without extents, have e2fsck turn on the feature if it finds (64bit &&
!extents).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
e2fsck does not detect extents which are outside their location in the
extent tree. This can result in a bad extent at the end of an extent-block
not being detected.
From a part of a dump_extents output:
1/ 2 37/ 68 143960 - 146679 123826181 2720
2/ 2 1/ 2 143960 - 146679 123785816 - 123788535 2720
2/ 2 2/ 2 146680 - 147583 123788536 - 123789439 904 Uninit <-bad extent
1/ 2 38/ 68 146680 - 149391 123826182 2712
2/ 2 1/ 2 146680 - 147583 18486 - 19389 904
2/ 2 2/ 2 147584 - 149391 123789440 - 123791247 1808
e2fsck does not detect this bad extent which both overlaps another, valid
extent, and is invalid by being beyond the end of the extent above it in
the tree.
This patch modifies e2fsck to detect this invalid extent and remove it.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Quiet a number of simple compiler warnings:
- pointers not initialized by ext2fs_get_mem()
- return without value in non-void function
- dereferencing type-punned pointers
- unused variables
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
An index node's logical start (ei_block) should
match the logical start of the first node (index
or leaf) below it. If we find a node whose start
does not match its parent, fix all of its parents
accordingly.
If it finds such a problem, we'll see:
Pass 1: Checking inodes, blocks, and sizes
Interior extent node level 0 of inode 274258:
Logical start 3666 does not match logical start 4093 at next level. Fix<y>?
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check and handle MMP checksum problems by resetting the block.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the helper function to determine if group descriptors have a
checksum. Ensure that metadata_csum and uninit_bg flags are not set
simultaneously, as part of pass 0.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Verify the checksums of separate extended attribute blocks and offer
to clear it if there is a mismatch.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Checks that directory leaf blocks have the necessary fake dir_entry at
the end of the block to hold a checksum and that the checksum is
valid. It will resize the block and/or rebuild the directory if
necessary.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Check htree internal node checksums. If broken, ask user to clear
the htree index and recreate it later.
[ Move the check for not rehashing the lost+found directory to pass1
so that we don't end up truncating lost+found when the metadata
checksum feature is enabled. -- TYT ]
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we encounter an extent tree block that passes the header check
but fails the checksum, offer to clear just that extent block instead
of failing the whole tree, which results in the entire inode being
wiped out.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Check block bitmap checksum and write a new checksum if the
verification fails. This is ok because e2fsck has already computed
the correct block bitmap.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rewrite the block bitmap when the checksum doesn't match. This is
ok since e2fsck will have already computed the correct inode bitmap.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Detect mismatches of the inode and checksum, and prompt the user to
fix the situation.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If user chooses to not fix quota info, then the FS should be
marked as having errors. PR_NO_OK prevented this from happening.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since "bool" is a valid C type, declarations of the form "int bool"
will cause compiler errors if <stdbool.h> is included. Rename these
variables to avoid this name clash.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Don't consider only an error in the superblock summary as incorrect.
The kernel does not update this field except at unmount time, so
don't print errors during a "-n" run if there is nothing else wrong.
Any other unfixed errors will themselves mark the filesystem invalid.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently fsck recomputes quotas and overwrites quota files
whenever its run. This causes unnecessary modification of
filesystem even when quotas were never inconsistent. We also
lose the limits information because of this. With this patch,
e2fsck compares the computed quotas to the on-disk quotas
(while updating the in-memory limits) and writes out the
quota inode only if it is inconsistent.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently e2fsck always incorrectly detects that quota inodes
need to be hidden (even if they are already hidden) and
modifies the superblock unnecessarily. This patch fixes the
check for hidden quota files and avoids modifying the
filesystem if quota inodes are already hidden.
Also, zero-out the old quota inode so that next fsck scan
doesn't complain.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've decided to remove EOFBLOCKS_FL from the ext4 file system entirely,
because it is not actually very useful and it is causing more problems
than it solves. We're going to remove it from e2fsprogs first and then
after the new e2fsprogs version is common enough we can remove the
kernel part as well.
This commit changes e2fsck to not check for EOFBLOCKS_FL. Instead we
simply search for initialized extents past the i_size as this should not
happen. Uninitialized extents can be past the i_size as we can do
fallocate with KEEP_SIZE flag.
Also remove the EXT4_EOFBLOCKS_FL from lib/ext2fs/ext2_fs.h since it is
no longer needed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Print the actual errors returned by ext2fs_open2() and
ext2fs_check_desc() before we fall back to the backup block group
descriptors so that it's easier to see if there is some obscure
failure that is causing e2fsck to think that it should use the backup
block group descriptors.
Addresses-Google-Bug: #6208183
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the ability to log messages about a file system to a specified
directory, using a file name templace that can be specified in
/etc/e2fsck.conf. This allows us to suppress the output of overly
verbose e2fsck outputs while still allowing the full logging output to
go to an appropriate file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also add appropriate documentation for options/max_count_problems and
problems/0xXXXXXX/max_count settings in /etc/e2fsck.conf
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This throttles the output of a particular problem type, to avoid a
bottleneck caused by (for example) printing a large number of
characters over a rate-limited a serial console.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If an extent has e_len set to zero, the kernel will oops with a
BUG_ON. Unfortunately, e2fsck wasn't catching this case. The kernel
needs to be fixed to notice this case and call ext4_error() instead of
failing an assertion check, but e2fsck should catch this case and
repair it (by deleting the errant extent).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Removing this check will allow us to eventually eliminate code from
the kernel which forcibly initialized the block bitmap when the inode
bitmap is first used. This would eliminate a required journal credit
and extra disk write.
Addresses-Google-Bug: #5944440
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In some cases the bad block inode gets corrupted. If it looks insane,
offer to clear it before trying to interpret it does more harm than
good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Multi-mount protection is feature that allows mke2fs, e2fsck, and
others to detect if the filesystem is mounted on a remote node (on
SAN disks) and avoid corrupting the filesystem. For e2fsprogs this
means that it checks the MMP block to see if the filesystem is in use,
and marks the filesystem busy while e2fsck is running on the system.
This is useful on SAN disks that are shared between high-availability
servers, or accessible by multiple nodes that aren't in HA pairs. MMP
isn't intended to serve as a primary HA exclusion mechanism, but as a
failsafe to protect against user, software, or hardware errors.
There is no requirement that e2fsck updates the MMP block at regular
intervals, but e2fsck does this occasionally to provide useful
information to the sysadmin in case of a detected conflict.
For the kernel (since Linux 3.0) MMP adds a "heartbeat" mechanism to
periodically write to disk (every few seconds by default) to notify
other nodes that the filesystem is still in use and unsafe to modify.
Originally-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Several compiler errors are quieted:
- zero-length gnu_printf format string
- unused variable
- uninitalized variable (though it isn't actually used for anything)
- fixed a bug in ext2fs_stat() if stat64() does not exist
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 2a77a784a3 (firest released in e2fsprogs 1.33) compared
superblock summary free blocks and inode counts with the allocation
bitmap counts before starting the file system check proper, and if
they differed, set the superblock and marked it as dirty. If no other
file systme changes were required, this would cause a "*** FILE SYSTEM
WAS MODIFIED ***" message without any explanation of what e2fsck had
changed.
We fix this by only setting the superblock summary free block/inodes
counts if we are skipping a full check, and in non-preen mode, e2fsck
will now print an explicit message stating how the superblock had been
updated.
In a full check, any updates to the superblock free blocks/inodes
fields will be noted in pass5.
This change requires changing a few test results (essentially
reversing the changes made in commit 2a77a784a3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The boolean options "force_no" in the problems stanza of e2fsck.conf
allows a particular problem code be treated as if the user will answer
"no" to the question of whether a particular problem should be fixed
--- even if e2fsck is run with the -y option.
As an example use case, suppose a distribution had widely deployed a
version of the kernel where under some circumstances, the EOFBLOCKS_FL
flag would be left set even though it should not be left set, and a
customer had a workload which exercised the fencepost error all the
time, resulting in many large number of inodes that had EOFBLOCKS_FL
set erroneously. Enough, in fact, the e2fsck runs were taking too
long. (There was such a bug in the kernel, which was fixed by commit
58590b06d in 2.6.36).
Leaving EOFBLOCKS_FL set when it should not be isn't a huge deal, and
is certainly than having high availability timeout alerts going off
left and right. So in this case, the best fix might be to put the
following in /etc/e2fsck.conf:
[problems]
0x010060 = { # PR_1_EOFBLOCKS_FL_SET
force_no = true
no_ok = true
no_nomsg = true
}
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are broken embedded devices that have system clocks that always
reset to January 1, 1970 whenever they boot (even if no power is
lost). There are also systems that have super cheap clock crystals
that can be very inaccurate. So if the option broken_system_clock is
given, disable all time based checks. E2fsck will also try to detect
incorrect system clock times, and automatically mark the system clock
as insane.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There were a number of problems that were prompting the user whether
or not to ABORT, but then would abort regardless of whether the user
answered yes or no. Change those to be PROMPT_NONE, PR_FATAL.
Also, fix PR_1_RESIZE_INODE_CREATE so that it recovers appropriately
after failing to create the resize inode. This problem now uses
PROMPT_CONTINUE instead of PROMPT_ABORT, and if the user says, "no",
the code will abort.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some kernels will crash if EOFBLOCKS_FL is set when it is it not
needed, and this if it is left set when it isn't needed, it is a sign
of a kernel bug.
Addresses-Google-Bug: #2604224
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The broken_system_clock allows the time to be in the future when in
preen mode. It's useful for people who have, as the name implies,
broken system clocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unfortunately, due to Windows' unfortunate design decision to
configure the hardware clock to tick localtime, instead of the more
proper and less error-prone UTC time, many users end up in the
situation where the system clock is incorrectly set at the time when
e2fsck is run.
Historically this was usually due to some distributions having buggy
init scripts and/or installers that didn't correctly detect this case
and take appropriate countermeasures. However, it's still possible,
despite the best efforts of init script and installer authors to not
be able to detect this misconfiguration, usually due to a buggy or
misconfigured virtualization manager or the installer not having
access to a network time server during the installation process. So
by default, we allow the superblock times to be fudged by up to 24
hours. This can be disabled by setting options.accept_time_fudge to
the boolean value of false in e2fsck.conf. The old
options.buggy_init_scripts is left for backwards compatibility.
Since we are now accepting the 24 hour time fudge by default, there is
no longer a need to install an Ubuntu-specific e2fsck.conf file, so we
can remove it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Non-expert users get confused when they see messages like this:
Illegal block #-1 (2291965952) in inode 176. CLEARED.
So change it to be something a little bit more understandable:
Illegal indirect block (2291965952) in inode 176. CLEARED.
Addresses-SourceForge-Bug: #2871782
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Very often all the block group descriptors will have bad checksums, so
don't force the user answer 'yes' many, many times.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixed a bug where e2fsck would report that last mount time was in the
future when it was really the last write time that was in the future.
Also, since people can't seem to believe that (a) their distribution
has buggy init scripts, or (b) their CMOS/RTC clock or backup battery
is dead, print the incorrect time and the current system time.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unfortunately, distributions like Ubuntu seem to have buggy init
scripts that run e2fsck and mount the root filesystem before making
sure the system time and time zone is correctly set. As a result, a
filesystem's last write and last mounted time can be set in future.
The buggy_init_scripts configuration option will stop e2fsck from
aborting the boot process, but it also inhibits the superblock times
from getting fixed. This causes resize2fs to refuse to resize the
filesystem, even after running e2fsck on the file system. To deal
with this, we need to fix the superblock write times unconditionally.
Addresses-Launchpad-bug: #373409
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext3 filesystems don't care if i_file_acl_hi is non-zero in some
inode, and newer kernels should ignore this field (although 2.6.29 and
older kernels will not). So e2fsck should fix this without aborting
an e2fsck preen operation.
Addresses-Debian-Bug: #526524
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cleanup whitespace in the problem.h and problem.c files. Removes a
bunch of places where tabs follow spaces, whitespace on empty lines, etc.
I didn't reformat the indenting of the entire problem.h error codes,
but there is some room for doing this...
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've hit a number of cases where the error codes in problem.h have
been assigned duplicate values compared to problems in our own e2fsck
patches, and this can lead to confusing and difficult to find bugs
in e2fsck (e.g. wrong problem messages, incorrect repair action, etc).
Attached is a test case for the problem.c file to ensure that the
problem table is sorted and does not contain any duplicate values.
Having the problem table sorted allows the correctness checking to be
very simple, and if it ever became important for performance we could
use binary searching of the problem table for the specific problem code.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The other problem codes associated with failing to create the
lost+found directory are non-fatal, and this one should be non-fatal
as well. The two places which call e2fsck_get_lost_and_found()
already deal with a failure to create the directory, so there's no
point making this be a fatal error.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4 filesystem uses journals too, so remove "ext3" from the
problem descriptions involving journals.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A corrupted interior node in an extent tree would cause e2fsck to
crash with the error message:
Error1: Corrupt extent header on inode 107192
Aborted (core dumped)
Handle this and related failures when scanning an inode's extent tree
more robustly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A few e2fsck problem messages supply their own prompt, and set a
prompt value of PROMPT_NULL. We have to check for this case, and not
pass the null string to _(), since that will result in the translation
header getting printed, like this:
Run journal anywayProject-Id-Version: e2fsprogs
Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>
POT-Creation-Date: 2008-02-28 21:45-0500
PO-Revision-Date: 2006-05-23 11:12+0000
Last-Translator: Somebody32 <som32@mail.ru>
Language-Team: Russian <ru@li.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 &&
n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;
X-Launchpad-Export-Date: 2008-05-28 00:43+0000
X-Generator: Launchpad (build Unknown)
<y>? yes
Addresses-Launchpad-Bug: #246892
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The rec_len field in the directory entry is 16 bits, so if the
filesystem is completely empty, rec_len of 0 is used to designate
65536, for the case where the directory entry takes the entire 64k
block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix error message to print the depth of a corrupt htree directory.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This makes it easier to locate the problem code in question.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The logical block numbers must be monotonically increasing, and there
must not be any overlapping extents. If any are found, report them as
filesystem corruption.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a check for the UNINIT_BLOCKS flag set in the last group. The kernel
patch doesn't handle this gracefully, because it assumes there are a full
set of blocks in each group marked UNINIT_BLOCKS. The kernel should be
fixed up, but in the meantime this avoids hitting the problem, and is
more consistent with lazy_bg not marking the last group UNINIT.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch has all the necesary pieces to open and fix filesystems created
with the uninit block group feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the prompt so it is clear to the user that e2fsck will be
clearing the htree information, not the directory inode itself, when
the htree information has proven to be corrupt.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Turns out a "should never happen" error can indeed happen very easily
if a directory with an htree index has an incorrect, and too-large,
i_size field. This patch fixes this so that we handle this situation
gracefully, allowing filesystems with this error to be fixed.
In another patch I will clean up the specific problem which caused the
internal "should never happen" error from happening at all, but patch
will prevent e2fsck from crashing, and prompt the user to remove the
htree index, so it can be rebuilt again after pass 3.
Thanks to Bas van Schaik at Tetra for giving me access to his system
so this problem could be debugged.
Addresses-Launchpad-Bug: #129395
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add vertificaton of the in-inode EA information, and allow in-inode
EA's to have a checksum.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If superblock mount time or last write time is in the future, and the
user refuses to fix the problem, don't mark the filesystem as being
invalid and needing to be checked.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Turkish translation has a bug in it where it has the translation
of "E@e '%Dn' in %p (%i)" to "E@E". This causes @E to be expanded at
@E, recursively, forever, until the stack fills up e2fsck core dumps.
Fix it by stopping after a recursive depth of 10, which is far more
than we need.
Addresses-Sourceforge-Bug: 1646081
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the journal had been removed because it was corrupt, the
E2F_FLAG_JOURNAL_INODE flag will be set. If this flag is set, then
recreate the filesystem after checking the filesystem.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
This is probably only useful in artificial test cases, but it will be
useful if we ever do the "inodes in directory" idea for ext4.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs and kernel implementation of directory hash tree has a
bug which causes the implementation to be dependent on whether
characters are signed or unsigned. Platforms such as the PowerPC,
Arm, and S/390 have signed characters by default, which means that
hash directories on those systems are incompatible with hash
directories on other systems, such as the x86.
To fix this we add a new flags field to the superblock, and define two
new bits in that field to indicate whether or not the directory should
be signed or unsigned. If the bits are not set, e2fsck and fixed
kernels will set them to the signed/unsigned value of the currently
running platform, and then respect those bits when calculating the
directory hash. This allows compatibility with current filesystems,
as well as allowing cross-architectural compatibility.
Addresses Debian Bug: #389772
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE (0x0008) - change i_blocks to be
in units of s_blocksize units instead of 512-byte sectors, use
l_i_frag and l_i_fsize as i_blocks_hi (could also be part of 64BIT).
E2fsck and debugfs changed to support i_blocks_hi instead of l_i_frag and
l_i_fsize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check to see if the superblock hint for the external journal needs to
be updated, and if so, offer to update it. (Addresses Debian Bug:
#355644)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the ability for the e2fsck configuration file to override the
behaviour of e2fsck when a particular filesystem problem is
encountered. This allows reconnecting an inode to lost+found to not
stop the boot sequence, if a system administrator really badly wants
this behaviour for some specialized reason, for example.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the superblock last mount time or last write time is in the future, fix
this automatically if e2fsck is in preeen mode, since Debian's boot sequence
bogusly doesn't set the time correctly until potentially very late in the bootup
process, and this can cause false positives that will cause users' systems
to fail to booting. (Addresses Debian Bugs #343662 and #343645)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Detect if the superblock's last mount field or last write field is in
the future, and offer to fix if so. (Addresses Debian Bug #327580)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
easier to understand (sorry, translators).
Add new @m (multiply-claimed) and @n (invalid) expansions for e2fsck
problem descriptions.
Add Dutch translation, and update French translation.
Add an explanation of how the @-expansion and %-exapansion works in
e2fsck/problem.c to make life easier for the translators.
Synchronize and update po files.
stored in inodes into e2fsck.
There are a number of bug fixes and enhancements over the original lustre fsck
BK repository. The biggest one is that this extended attribute values must
be aligned on 4-byte boundaries.
resize_inode capability disabled, but which still have the
s_reserved_gdt_blocks field set in the superblock, or which
still have blocks in the inode #7 (the resize inode).
Theodore Ts'o