Clean up some compile warnings related to fstat64(), which is
verbosely deprecated on OSX.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
calculate_minimum_resize_size() forgot to account s_first_data_block
into minimum filesystem size. Thus in case the size of filesystem was
such that the last group had the minimal size (50 blocks + metadata
overhead), the code in adjust_fs_info() decided the group is unneeded,
removed it, and in some cases the resizing then failed with ENOSPC.
Fix the issue by properly accounting for s_first_data_block in
calculate_minimum_resize_size().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linux's compat_sys_ioctl() function, which is run when executing a
ioctl using a 32-bit binary on a 64-bit kernel, returns EINVAL when an
inode does not exist. Sigh. See /usr/src/linux/fs/compat_ioctl.c.
This is probably a kernel bug, but work around it for now.
Addresses-Debian-Bug: #644989
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit fixes a failure when running the commands:
dd if=/dev/zero of=fs bs=1k count=100k; mke2fs fs; resize2fs -Mp fs
We should not try truncating the file system if there is only a single
block group in the file system.
Addresses-Sourceforge-Bug: #3404051
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 9f6ba888f0 added support for new online resize ioctl
EXT4_IOC_RESIZE_FS. It is also trying to avoid failure when this
ioctl() is not supported by the kernel however it is checking wrong
error code (EINVAL).
When the ioctl does not exist, errno is set to ENOTTY, so we should
check for that, rather than EINVAL which means that ioctl arguments
are not valid. So change the code to check for ENOTTY and allow
resize2fs to try to use the old approach. Also add some comments.
Addresses-Red-Hat-Bugzilla: #746284
Addresses-Debian-Bug: #644989
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also remove the _("<foo>") marker from a string that was all numbers
and hence didn't need punctuation.
Thanks to Philipp Thomas and Goeran Uddeborg for reporting these
buglets.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For those e2fsprogs programs which use libcom_err and are
internationalized, pass the gettext() function to libcom_err during
program initialization.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On-line resizing has been broken in the 1.42 series for two reasons:
(a) the call to the new EXT4_IOC_RESIZE_FS ioctl checked for ENOTTY to
indicate that the ioctl does not exist, when in fact EINVAL is what is
returned if the ioctl doesn't exist. (b) resize2fs was passing in a
pointer to a 64-bit value, when the ioctl expected a 32-bit value.
This was OK on little-endian systems, but it wouldn't work at all on
big-endian systems.
Fix both problems.
Addresses-Debian-Bug: #451388
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Code to count the number of blocks in the last partial
group is cut and pasted around the e2fsprogs codebase
a few times.
Making this a helper function should improve matters.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In many places we are using #ifdef HAVE_OPEN64 to determine if we can
use open64() but that's ugly. This commit creates two new helpers
ext2fs_open_file() for open() and ext2fs_stat() for stat(). Also we need
new typedef ext2fs_struct_stat for struct stat.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is needed to support online resizing for > 32-bit file systems
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The write_journal_inode() code is only setting the low 32-bit i_size
for the journal size, even though it is possible to specify a journal
up to 10M blocks in size. Trying to create a journal larger than 2GB
will succeed, but an immediate e2fsck would fail. Store i_size_high
for the journal inode when creating it, and load it upon access.
Use s_jnl_blocks[15] to store the journal i_size_high backup. This
field is currently unused, as EXT2_N_BLOCKS is 15, so it is using
s_jnl_blocks[0..14], and i_size is in s_jnl_blocks[16].
Rename the "size" argument "num_blocks" for the journal creation functions
to clarify this parameter is in units of filesystem blocks and not bytes.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I ran into odd behavior where mkfs.ext4 of a 16T filesystem would
create a resize inode with 0 reserved blocks, and mark the resize_inode
feature.
A subsequent slight downward resize of the filesystem would remove
the resize inode, making any further offline resizing impossible.
This is especially odd in light of the fact that a large downward
resize (say, to 8T) will actually add blocks to the resize inode -
so a small resize removes it, a large resize expands it ...
commit 8ade268cf2 had added this:
If the filesystem is grown to the point where the resize_inode is no
longer needed, clean it up properly so e2fsck doesn't have to.
but, it seems e2fsck does not care about this situation, either.
So, simply leave the resize_inode intact in this case, and everything
seems to be happy.
Note, this is for the 1.41.xx branch.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before we go whole-hog on 64-bit e2fsprogs, I wonder if this
is worth considering as a last-minute addition to the 1.41
stream. Currently, mke2fs will shave a block off an exactly-16T
device to fit*, but resize2fs does not do the same, leading
to some asymmetry. This patch fixes that up, and allows 16T
devices to be handled more gracefully in offline resize.
(in fact resize2fs will not even open a 16T device, today).
*commit 37d17a65ec
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Requiring an immediate pre-fsck before printing a minimum
resize size seems a bit draconian; if the fs isn't clean or marked
with error, then certainly, but for an informational minimum
size, I don't think we need to require a fsck since last mount.
I had simply copied the checks from the actual resize path,
previously.
Installers use this option (-P) to gather minimum resize info,
and requiring an actual fsck before use just seems to go too far.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 641b66b fixed a floating point precision error which can result
in a search algorithm looping forever. It can also result in an array
index being out of bounds and causing a segfault. Here are two more
cases in e2fsck and resize2fs that need to be fixed. I've just used
the same fix from the that commit.
Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Right now, resize2fs -P on a dirty filesystem will give you a number;
however, it's probably wrong if the fs is not clean:
# resize2fs -P myimage.img
resize2fs 1.41.9 (22-Aug-2009)
Estimated minimum size of the filesystem: 75623
# e2fsck -fy myimage.img
e2fsck 1.41.9 (22-Aug-2009)
myimage.img: recovering journal
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
myimage.img: ***** FILE SYSTEM WAS MODIFIED *****
myimage.img: 9530/53760 files (0.1% non-contiguous), 24737/98304 blocks
# resize2fs -P myimage.img
resize2fs 1.41.9 (22-Aug-2009)
Estimated minimum size of the filesystem: 32165
We should issue the same "Please run e2fsck ..." message for
-P as we do for an actual resize request.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 74128f8 added tests for uninit groups, but it could access past
the end of the group_desc[] array after processing the last group:
==19668== Invalid read of size 2
==19668== at 0x40518C: resize_fs (resize2fs.c:1824)
==19668== by 0x405A46: main (main.c:451)
==19668== Address 0x5a0d002 is not stack'd, malloc'd or (recently) free'd
==19668==
==19668== Invalid read of size 2
==19668== at 0x405391: resize_fs (resize2fs.c:1864)
==19668== by 0x405A46: main (main.c:451)
==19668== Address 0x5a0d002 is not stack'd, malloc'd or (recently) free'd
==19668==
It was found by Eric Sandeen running the regression suite through
valgrind.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Resizing a filesystem with an external journal fails when it tries
to read inode 0:
# touch testfs
# truncate testfs 1342177280
# touch testjournal
# truncate testjournal 134217728
# mke2fs -O journal_dev testjournal
# losetup /dev/loop0 testjournal
# mkfs.ext4 -J device=/dev/loop0 testfs 127680
# resize2fs testfs
resize2fs 1.41.9 (22-Aug-2009)
Resizing the filesystem on testfs to 327680 (4k) blocks.
resize2fs: Illegal inode number while trying to resize testfs
Please run 'e2fsck -fy testfs' to fix the filesystem
after the aborted resize operation.
I think the right, simple thing to do is just bail out early
for an external journal here, as there are no backup blocks
to update.
Reported-by: mjevans1983@gmail.com
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit forces the use of the system-provided blkid or uuid header
files if we are using the system-provided blkid or uuid libraries.
This avoids using the in-tree header files with the system libraries.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When flex_bg is on, calculate_minimum_resize_size() should add more meta
blocks for newly added flex_bg.
Addresses-RedHat-Bugzilla: #519131
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When running resize2fs -M, no need to recalculate the minimal fs size.
Signed-off-by: "Peng Tao" <bergwolf@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Andreas Dilger