There is a bug in how e2fsck handles being interrupted by CTRL-C.
If CTRL-C is pressed to kill e2fsck rather than e.g. kill -9, then
the interrupt handler sets E2F_FLAG_CANCEL in the context but doesn't
actually kill the process. Instead, e2fsck_pass1() checks this flag
before processing the next inode.
If a filesystem is running in fix mode (e2fsck -fy) is interrupted,
and the quota feature is enabled, then the quota file will still be
written to disk even though the inode scan was not complete and the
quota information is totally inaccurate. Even worse, if the Pass 1
inode and block scan was not finished, then the in-memory block
bitmaps (which are used for block allocation during e2fsck) are also
invalid, so any blocks allocated to the quota files may corrupt other
files if those blocks were actually used.
e2fsck 1.42.13.wc3 (28-Aug-2015)
Pass 1: Checking inodes, blocks, and sizes
^C[QUOTA WARNING] Usage inconsistent for ID 0:
actual (6455296, 168) != expected (8568832, 231)
[QUOTA WARNING] Usage inconsistent for ID 695:
actual (614932320256, 63981) != expected (2102405386240, 176432)
Update quota info for quota type 0? yes
[QUOTA WARNING] Usage inconsistent for ID 0:
actual (6455296, 168) != expected (8568832, 231)
[QUOTA WARNING] Usage inconsistent for ID 538:
actual (614932320256, 63981) != expected (2102405386240, 176432)
Update quota info for quota type 1? yes
myth-OST0001: e2fsck canceled.
myth-OST0001: ***** FILE SYSTEM WAS MODIFIED *****
There may be a desire to flush out modified inodes and such that have
been repaired, so that restarting an interrupted e2fsck will make
progress, but the quota file update is plain wrong unless at least
pass1 has finished, and the journal recreation is also dangerous if
the block bitmaps have not been fully updated.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, e2fsck accessed the field osd2.linux2.l_i_file_acl_high
field without checking that the filesystem is indeed created for
Linux. This lead to e2fsck constantly complaining about certain
nodes:
i_file_acl_hi for inode XXX (/dev/console) is 32, should be zero.
By "correcting" this problem, e2fsck would clobber the field
osd2.hurd2.h_i_mode_high.
Properly guard access to the OS dependent fields.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Sami Liedes reports that e2fsck fails to report the correct directory
inode number during a pass2 check for unexpected HTREE blocks.
Provide the inode number in the problem report.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reported-by: Sami Liedes <sami.liedes@iki.fi>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we're forced to delete a crosslinked file, only call
ext2fs_block_alloc_stats2() on cluster boundaries, since the block
bitmaps are all cluster bitmaps at this point. It's safe to do this
only once per cluster since we know all the blocks are going away.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we're filling a directory hole, we need to perform an implied
cluster allocation to satisfy the bigalloc rule of mapping only one
pblk to a logical cluster.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide an API to set i_size in an inode and take care of all required
feature flag modifications. Refactor the code to use this new
function.
[ Moved the function to lib/ext2fs/blk_num.c, which is the rest of
these sorts of functions live, and renamed it to be
ext2fs_inode_size_set() instead of ext2fs_inode_set_size() to be
consistent with the other functions in in blk_num.c -- tytso ]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During the later passes of efsck, we sometimes need to allocate and
map blocks into a file. This can happen either by fsck directly
calling new_block() or indirectly by the library calling new_block
because it needs to allocate a block for lower level metadata (bmap2()
with BMAP_SET; block_iterate3() with BLOCK_CHANGED).
We need to force new_block to allocate blocks from the found block
map, because the FS block map could be inaccurate for various reasons:
the map is wrong, there are missing blocks, the checksum failed, etc.
Therefore, any time fsck does something that could to allocate blocks,
we need to intercept allocation requests so that they're sourced from
the found block map. Remove the previous code that swapped bitmap
pointers as this is now unneeded.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Mostly by adding static and removing excess extern qualifiers. Also
convert a few remaining non-ANSI function declarations to ANSI.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For each site where we test for a large file (> 2GB) and set the
LARGE_FILE feature, use a helper function to make the size test
consistent with the test that's in e2fsck. This fixes the fsck
complaints when we try to create a 2GB journal (not so hard with 64k
block size) and fixes the incorrect test in fileio.c.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The use of ext2fs_write_dir_block() meant that attempts to fix
deleted/unused inodes in a directory would not be fixed for file
systems with 64-bit block numbers. (And some random block with the
high 32-bits cleared would get corrupted.)
Fix a similar problem when expanding directories and when creating the
lost+found dirctory.
Signed-off-by: Kit Westneat <kwestneat@ddn.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
The function deallocate_inode() in e2fsck/pass2.c was buggy in that it
would clear out the inode's mode and flags fields before trying to
deallocate any blocks which might belong to the inode.
The good news is that deallocate_inode() is mostly used to free inodes
which do not have blocks: device inodes, FIFO's, Unix-domain sockets.
The bad news is that if deallocate_inode() tried to free an invalid
extent-mapped inode, it would try to interpret the root of the extent
node as block numbers, and would therefore mark various file system
metadata blocks (the superblock, block group descriptors, the root
directory, etc.) as free and available for allocation. This was
unfortunate.
(Try running an older e2fsck against the test file system image in the
new test f_invalid_extent_symlink, and then run e2fsck a second time
on the fs image, and weep.)
Fortunately, this kind of file system image corruption appears to be
fairly rare in actual practice, since it would require a very unlucky
set of bits to be flipped, or a buggy file system implementation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Perhaps the most serious fix up is a type-punning warning which could
result in miscompilation with overly enthusiastic compilers.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that we have multiple backend implementations of the bitmap code,
this commit teaches e2fsck to use either the most appropriate backend
for each use case.
Since we don't know for sure if we will get it all right, the default
choices can be overridden via e2fsck.conf. The various definitions
are shown here, with the current defaults (which may change as we add
more bitmap implementations and as learn what works better).
; EXT2FS_BAMP64_BITARRAY is 1
; EXT2FS_BMAP64_RBTREE is 2
; EXT2FS_BMAP64_AUTODIR is 3
[bitmaps]
inode_used_map = 2 ; pass1
inode_dir_map = 3 ; pass1
inode_reg_map = 2 ; pass1
block_found_map = 2 ; pass1
inode_bad_map = 2 ; pass1
inode_imagic_map = 2 ; pass1
block_dup_map = 2 ; pass1
block_ea_map = 2 ; pass1
inode_link_info = 2 ; pass1
inode_dup_map = 2 ; pass1b
inode_done_map = 3 ; pass3
inode_loop_detect = 3 ; pass3
fs_bitmaps = 2
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
old_op is set but never used, because we restore "0"
not old_op. So don't bother with it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The name_len field in ext2_dir_entry is actually comprised of
the name length in the lower 8 bytes, and the filetype in the
high 8 bytes. So in places, we mask name_len with 0xFF to
get the actual length.
But once we have masked name_len with 0xFF, there is no point
in testing whether it is greater than EXT2_NAME_LEN, which
is 255 - or 0xFF. So all of these tests are extraneous.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 6267ee4 avoided repeating pass #1 over and over again if
multiple block groups are found with inodes in the bg_itable_unused
region during pass #2. This caused a regression because the problem
with not restarting pass #1 right away is that e2fsck will offer to
clear directory entries for inodes that are deleted, and e2fsck can't
easily distinguish between deleted inodes and inodes that were skipped
because of an incorrect bg_itable_unused value. So once an inode is
found in an unused region and we know that we're going to restart the
e2fsck pass, don't offer to clear any deleted inodes --- since those
will be caught in the second round.
Addresses-Google-Bug: #2642165
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In pass 2, when allocating new blocks for holes in directories, use
ext2fs_set_bmap() instead of ext2fs_block_iterate2() with a helper
function so that the newly allocated directory blocks are correctly
assigned in extent-mapped directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Remove the continue statement because it calls at the end of the loop.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously e2fsprogs interpreted 0 for a rec_len of 65536 (which could
occur if the directory block is completely empty in 64k blocksize
filesystems), while the kernel interpreted 65535 to mean 65536. The
kernel will accept both to mean 65536, and encodes 65535 to be 65536.
This commit changes e2fsprogs to match.
We add the encoding agreed upon for 128k and 256k filesystems, but we
don't enable support for these larger block sizes, since they haven't
been fully tested.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
in the case of ! defined RESOURCE_TRACK, so that we can clean up #ifdef
throughout e2fsck source.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Restart e2fsck only once in case of multiple inodes in uninit range.
Display correct inode number during BG_INO_UNINIT and INOREF_IN_USED errors.
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some of these could affect filesystems between 2^31 and 2^32-1 blocks.
Thanks to Valerie Aurora Henson for pointing out the problems in
lib/ext2fs/alloc_tables.c, which led me to do a "make gcc-wall" scan
over the source tree.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The rec_len field in the directory entry is 16 bits, so if the
filesystem is completely empty, rec_len of 0 is used to designate
65536, for the case where the directory entry takes the entire 64k
block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix error message to print the depth of a corrupt htree directory.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch has all the necesary pieces to open and fix filesystems created
with the uninit block group feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Andreas Dilger