Requiring an immediate pre-fsck before printing a minimum
resize size seems a bit draconian; if the fs isn't clean or marked
with error, then certainly, but for an informational minimum
size, I don't think we need to require a fsck since last mount.
I had simply copied the checks from the actual resize path,
previously.
Installers use this option (-P) to gather minimum resize info,
and requiring an actual fsck before use just seems to go too far.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 641b66b fixed a floating point precision error which can result
in a search algorithm looping forever. It can also result in an array
index being out of bounds and causing a segfault. Here are two more
cases in e2fsck and resize2fs that need to be fixed. I've just used
the same fix from the that commit.
Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case where the original superblock and the backup superblock
are both invalid in some way, e2fsck will try to go back to the
orignal superblock. To do that, it must close the attempted open
using the backup superblock first (since otherwise the exclusive open
will prevent the subsequent open from succeding).
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The getopt() function returns an int, not a char. On systems where the
default char is unsigned (like ppc), we get weird behavior where -1 is
truncated to 0xff but compared to (int)-1.
Also fix this same bug for two test programs, test_rel and iscan,
which aren't currently used at the moment.
Addresses-Gentoo-Bug: #299386
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The test now checks to make sure the superblock fields are correctly
aligned and prints them out so they can be manually checked to make
sure they are where we expect them to be.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add superblock fields which track where and when the first and most
recent file system errors occured. These fields are displayed by
dumpe2fs and cleared by e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We also support for byte-swapping the Next3 fields, although the
current Next3 implementation doesn't support big-endian systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
To prevent direct array indexing of fs->group_desc[i] (because the
group_desc may be a different size for different filesystems) make it
an opaque pointer that may only be accessed through the accessor
functions in blknum.c. The type itself is still available in a public
header; if we have a group_desc that we know is one type or another,
it's ok to access its fields directly. This change only prevents us
from indexing off fs->group_desc[i] directly.
Old-style applications who don't want to change their source code can
(as a temporary short-term hack) #define EXT2FS_OLD_32_COMPAT before
including ext2fs.h.
Change the accessors in blknum.c to use ext4fs_group_desc(), a version
of ext2fs_group_desc() which returns a ext4_group_desc pointer.
This simplifies and collapses a fair bit of code in blknum.c
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to defer setting the blocks count field in the fs_param
structure until it is known whether 64-bit feature will be enabled
(and whether the blocks count is valid).
We also add a new mke2fs.conf configuration parameter,
auto_64-bit_support which will automatically enable the 64-bit feature
if the number of blocks requires it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use 64-bit interfaces in mke2fs. This should be most most of whats
needed to support creating a 64-bit filesystem.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is needed to enable 64-bit mke2fs to work correctly.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reserve the EXT4_FEATURE_INCOMPAT_DIRDATA feature flag for adding
extra file data in ext2_dir_entry_2 entries.
This changes the on-disk layout in the following way.
Firstly, the ext2_dir_entry_2 file_type field now has a mask: that
limits the "filetype" information to the low 4 bits of this field.
Since these values are sequentially assigned, this allows for up to 7
more filetypes to be assigned. When reading the "filetype" field, the
high 4 bits should be masked off when converting to DT_* filetypes for
userspace.
The high 4 bits of "filetype" are used as a bitmask to register up to
4 different "extended" directory entry fields. Extended data fields
are packed without alignment into the directory entry after the "name"
field in order of increasing bitmask value, for each field where bit
is set. In order to avoid the need to "understand" each of the
extended fields, the first byte of each extended data field holds the
size of that data field (including the size itself), so they can be
skipped if not understood. For fields that change the semantics of
the filesystem it is expected that a separate ROCOMPAT or INCOMPAT
field is registered.
There is a single dirent data type defined currently, for Lustre:
which holds a 128-bit file identifier. It is expected that if there
are 64-bit inode values that this will be assigned the 0x20 value.
Should a need ever arise to use all 4 of the extended dirent data
fields, it would be possible to keep the last bit (0x80) for use as a
multiplexor that stores a 1-byte aggregate data size, then a series of
"<u8_size><u8_type><data>" records in the last extended data record.
It is not expected that this will actually be needed in the lifetime
of ext4.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reserve the EXT4_INCOMPAT_EA_INODE feature flag for use with
large extended attributes that are stored in a separate inode.
This changes the on-disk format in several ways:
First, replace the e_value_block field with e_value_inum, so that
an xattr entry can reference an external inode. This field is
currently unused, as all of the entries live in the same block.
struct ext2_ext_attr_entry {
__u8 e_name_len; /* length of name */
__u8 e_name_index; /* attribute name index */
__le16 e_value_offs; /* offset in disk block of value */
> __le32 e_value_inum; /* inode in which the value is stored */
__le32 e_value_size; /* size of attribute value */
__le32 e_hash; /* hash value of name and value */
char e_name[0]; /* attribute name */
}
Second, add a flag to the inode that indicates it is using a large
(external) extended attribute. This is needed so that when unlinking
an inode the xattrs will be scanned to unlink the xattr inodes
referenced by the main inode.
Third, for inodes that have a number of xattrs that are larger than
a single block, but not large enough to justify an external inode
(less than 64kB total xattr size, due to e_value_offs limitation)
the ext2_ext_attr_header->h_blocks field can grow beyond a single
block to represent a contiguous allocation of blocks for the xattr.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The system header file can end up causing type conflicts, and
including kernel header files is always dodgy/dangerous (and this case
not needed).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This test, added to e2fsprogs-1.41.12, is backwards.
If EOFBLOCKS is set, then the size -should- be less than
the last physical block...
xfstests 013 caught this.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allow the uninit_bg feature to be set without requiring an fsck. The
first full fsck will require scanning all of the inode table blocks,
but subsequent fsck's will be fast. This allows flexibility over
requiring a full fsck after setting this feature, which is what
tune2fs previously mandated.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a dependency on subs to all-libs-recursive and all-progs-recursive
to dpkg-buildpackage -j2, since it builds make target 'libs'
explicitly, and we need to make sure the 'subs' target is run first.
Addresses-Debian-Bug: #563487
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It's a bad idea to set the checksums if e2fsck is aborted by the user,
and it often causes an error message, "Inode bitmap not loaded while
setting block group checksum info".
Addresses-Launchpad-Bug: #582035
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o