pass1b.c (clone_file_block): Don't clear the dup_map flag if the block
also shares data with the fs metadata when the count drops to 1, since
the block should still be cloned, as fs metadata isn't included in the
count.
ChangeLog, pass3.c:
pass3.c (adjust_inode_count): Fix bug where we didn't keep the
internal and external inode counts in sync when we decremented an
inode whose link count was already zero. Now we skip incrementing or
decrementing both link counts if we would cause an overflow condition.
(expand_dir, expand_dir_proc): Change where we update the inode block
count and size files so that the block count field is updated
correctly when we create an indirect block.
unix.c: Add support for calculating a progress bar if the -C0 option
is given. The function e2fsck_clear_progbar() clears the progress bar
and must be called before any message is issued. SIGUSR1 will enable
the progress bar, and SIGUSR2 will disable the progress bar. This is
used by fsck to handle parallel filesystem checks. Also, set the
device_name from the filesystem label if it is available.
e2fsck.h: Add new flags E2F_FLAG_PROG_BAR and E2F_FLAG_PROG_SUPRESS.
Add new field in the e2fsck structure which contains the last tenth of
a percent printed for the user.
message.c (print_e2fsck_message): Add call to e2fsck_clear_progbar().
pass1.c (e2fsck_pass1):
pass2.c (e2fsck_pass2):
pass3.c (e2fsck_pass3):
pass4.c (e2fsck_pass4):
pass5.c (e2fsck_pass5): Add call to e2fsck_clear_progbar when printing
the resource tracking information.
pass5.c (check_block_bitmaps, check_inode_bitmaps): If there is an
error in the bitmaps, suppress printing the progress bar using the
suppression flag for the remainder of the check, in order to clean up
the display.
util.c (print_resource_track): Use mallinfo if present to get more
accurate malloc statistics.
pass3.c (get_lost_and_found): Check to see if lost+found is a plain
fail; if so, offer to unlink it.
problem.c, problem.h (PR_3_LPF_NOTDIR): Add new problem code.
problem.c: Fix problem message for PR_1_BAD_GROUP_DESCRIPTORS so that
the block group number is printed. Add new prompt, PROMPT_UNLINK.
pass3.c (get_lost_and_found): If the filesystem is not opened
read-only, then force /lost+found to be created if it is not present.
problem.c: Allow PR_3_NO_LF_DIR to be handled during a preen operation.
ChangeLog, Makefile.in:
Makefile.in: Updated dependencies.
ChangeLog, fsck.c:
fsck.c (load_fs_info): Parse /etc/fstab ourselves, instead of relying
on getmntent(). This has the advantage of allowing us to properly
handle missing pass numbers correctly.
ChangeLog, configure.in:
configure.in: Add paths.h to header files for which we search.
problem.c: Add PR_3_NO_DIRINFO error code.
super.c (check_super_value): Rename min and max to min_val and max_val
to avoid possible cpp macro conflicts.
pass4.c (e2fsck_pass4): Rename max to maxgroup, to avoid possible cpp
macro conflicts.
pass3.c (e2fsck_pass3): Rename max to maxdirs, to avoid possible cpp
macro conflicts.
(check_directory): Fix logic to avoid possible core dump in the
case of ext2fs_get_dir_info returning NULL. (By the time we get here,
it should never happen, but...). Also simply/streamline the control
flow of the function.
pass2.c (e2fsck_pass2): Fix the progress accounting so that we get to
100%.
pass3.c (e2fsck_pass3): Change progress accounting to be consistent
with the other e2fsck passes.
e2fsck.c (e2fsck_run): At the end of each pass, call the progress
function with the pass number set to zero.
unix.c (e2fsck_update_progress): If the pass number is zero, ignore
the call, since that indicates that we just want to deallocate any
progress structures.
emptydir.c:
Commit partially done file.
ChangeLog, badblocks.c:
badblocks.c (ext2fs_badblocks_list_add): Use a bigger increment than
10 blocks when we need to expand the size of the badblocks list.
Change the progress function to return an integer; if returns 1, then
the progress function is expected to have set the e2fsck context flag
signalling a user abort, and the caller should also initiate a user
abort.
e2fsck.h: Add new field, priv_data to the e2fsck context structure.
It should be used by callers of the e2fsck functions only, and not by
anything in e2fsck itself.
super.c: Instead of call ext2fs_get_device_size(), define and call
e2fsck_get_device_size(). (This function may be stubbed out in
special versions of e2fsck.)
pass3.c, pass4.c: Remove extra calls to the progress function that
weren't needed.
mke2fs.8.in: Update man page to note that the format of the bad block
file is the same as the one generated by badblocks.
e2fsck.h: If EXT2_FLAT_INCLUDES is defined, then assume all of
the ext2-specific header files are in a flat directory.
dirinfo.c, ehandler.c, pass1.c, pass1b.c, pass2.c, pass5.c,
super.c, swapfs.c, unix.c: Explicitly cast all assignments
from void * to be compatible with C++.
unix.c (sync_disk): Remove sync_disk and calls to that function,
since ext2fs_close() now takes care of this.
pass1.c, pass1b.c, pass2.c, pass3.c, swapfs, badblocks.c,
ehandler.c, unix.c: Change use of private to be priv_data, to
avoid C++ reserved name clash.
Fix bug which could cause core dump when expanding the directory, and
the bitmaps hadn't yet been read in. Also, only use
ext2fs_write_dir_block when writing a directory block, not when
writing out a fresh indirect block.
pass1.c, pass2.c, pass3.c, pass4.c, pass5.c: Add calls to the progress
indicator function.
pass1.c (scan_callback): Add call to the progress feedback function
(if it exists).
super.c (check_super_block): Skip the device size check if the
get_device_size returns EXT2_EXT_UNIMPLEMENTED.
iscan.c (main): Don't use fatal_error() anymore.
pass1b.c, swapfs.c, badblocks.c: Set E2F_FLAG_ABORT instead of calling
fatal_error(0).
problem.c, pass3.c (PR_3_ROOT_NOT_DIR_ABORT,
PR_3_NO_ROOT_INODE_ABORT): New problem codes.
problem.c, pass2.c (PR_2_SPLIT_DOT): New problem code.
problem.c, pass1.c (PR_1_SUPPRESS_MESSAGES): New problem code.
problemP.h: New file which separates out the private fix_problem data
structures.
util.c, dirinfo.c, pass1.c, pass1b.c, pass2.c, pass5.c, super.c,
swapfs.c util.c: allocate_memory() now takes a e2fsck context as its
first argument, and rename it to be e2fsck_allocate_memory().
problemP.h:
New file which contains the private problem abstraction definitions.
Makefile.pq:
Remove include of MAKEFILE.STD, which doesn't exist at this point.
Change ext2fs_read_inode, ext2fs_write_inode to take the e2fsck
context as their first argument.
Change dir_info.c routines to take an e2fsck_context, renamed them to
start with e2fsck_ to avoid namespace issues, and changed them to
store the directory information inside the e2fsck context.
Added e2fsck_run() which calls all of the e2fsck passes in the correct
order, and which handles the return of abort codes.
Added abort processing, both via setjmp/longjmp and via flags in the
e2fsck context.
Use a flag in the e2fsck context instead of the restart_e2fsck global
variable.
Change uses of free and malloc to ext2fs_free_mem and ext2fs_get_mem.
Rename new error codes to _ET_ in them for consistency.
ChangeLog, et_c.awk, et_h.awk:
Remove support for non STDC compilers, since the workarounds caused
problems with the header file.
Makefile.pq:
Checkpoint of powerquest work.
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
pass*.c, super.c: Massive changes to avoid using printf and com_err
routines. All diagnostic messages are now routed through the
fix_problem interface.
pass2.c (check_dir_block): Check for duplicate '.' and '..' entries.
problem.c, problem.h: Add new problem codes PR_2_DUP_DOT and
PR_2_DUP_DOT_DOT.
problem.c: Added new problem codes for some of the superblock
corruption checks, and for the pass header messages. ("Pass
1: xxxxx")
util.c (print_resource_track): Now takes a description argument.
super.c, unix.c, e2fsck.c: New files to separate out the
operating-specific operations out from e2fsck.c. e2fsck.c now
contains the global e2fsck context management routines, and
super.c contains the "pass 0" initial validation of the
superblock and global block group descriptors.
pass1.c, pass2.c, pass3.c, pass4.c, pass5.c, util.c: Eliminate
(nearly) all global variables and moved them to the e2fsck
context structure.
problem.c, problem.h: Added new problem codes PR_0_SB_CORRUPT,
PR_0_FS_SIZE_WRONG, PR_0_NO_FRAGMENTS, PR_0_BLOCKS_PER_GROUP,
PR_0_FIRST_DATA_BLOCK
expect.1, expect.2:
Updated tests to align with e2fsck problem.c changes.
Theodore Ts'o