This patch adds project quota support. An new quota type PRJQUOTA(2)
is added. EXT4_PRJ_QUOTA_INO(11) is reserved for project quota inode.
The super block reservers an field s_prj_quota_inum for saving
project quota inode. And each inode adds an internal field i_projid
for saving its project ID.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch add project feature flag EXT4_FEATURE_RO_COMPAT_PROJECT.
Project feature is a read-only compat feature. Thus, an ext4 file
system with project feature enabled could only be read by ext4
kernel module without project feature support.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Project quota related fields are reserved in Linux kernel.
As a preparation for it, this patch cleans up quota codes
of e2fsprogs so as to make it easier to add new quota type(s).
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We will be using libsupport.a for e2fsprogs's internal support
functions. It will contain the quota support functions, but we will
also be moving code such as profile.c and plausible.c to libsupport.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There were some generated files that weren't getting removed by the
clean and distclean targets; fix this.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Having multiple versions of jfs_user.h was confusing the Android
build. Clean up things by removing the lib/ext2fs/jfs_user.h and
misc/jfs_user.h and simplifying how we emulate the kernel
infrastructure needed by journal replay code and removing the
kernel-specific lines from kernel-jbd.h.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The compression patches were an out-of-kernel patch set that was (a)
only available for ext2, (b) something that was never could be
stablized due to file system corruption, and (c) the most recent
patches were for 3.1, last updated in 2011.
The history of the compression patches has been a bit checkered.
There is a long history here at http://e2compr.sourceforge.net which
lists the perspective of the people working on it from the e2compr
side.
From the ext2/3/4 mainline developers' perspective, initial
compression support was added to e2fsprogs in 2000 (in the Linux 2.2
era), but due to stability concerns the kernel patches were never
merged into the mainline kernel. While there were some sporadic
efforts to try to get the ext2 compression patches working in the 2.4
and 2.6 era, by that time mainline work had moved on to ext4, and the
e2compr approach could only work with 32-bit block numbers and
indirect mapped files.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add missing new lib/ext2fs source files that were added for encryption
support. Also move configuration #define's from individual Android.mk
to the android_config.h file, since we've moved away from specifying
configuration #define's on the command-line upstream.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, e4crypt required the user to manually specify the salt
used for their passphrase. This was user unfriendly to say the least.
The e4crypt program can now request the salt using an ioctl, which
will automatically generate the salt if necessary, and keep it in the
ext4 superblock.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The Android.mk files were taken from the Android AOSP sources, and
updated for the 1.43 next branch. The intention is that this will
allow the repository which is currently located in external/e2fsprogs
with one which is based off of the upstream e2fsprogs. Right now
external/e2fsprogs was not created using "git clone", so it means that
git merges don't work. After the external/e2fsprogs Android
repository is replaced, with one based off the upstream repository,
Android will be able to synchronize with the upstream repository by
pulling and merging from upstream, and then running the script
"./util/gen-android-files" to update any generated files. (This is
necessary because in the Android build system, the Android.mk files
are rather stylized and don't make it easy to run arbitrary shell
scripts during the build phase.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It turns out that there are some serious problems with the on-disk
format of journal checksum v2. The foremost is that the function to
calculate descriptor tag size returns sizes that are too big. This
causes alignment issues on some architectures and is compounded by the
fact that some parts of jbd2 use the structure size (incorrectly) to
determine the presence of a 64bit journal instead of checking the
feature flags. These errors regrettably lead to the journal
corruption reported by Mr. Reardon.
Therefore, introduce journal checksum v3, which enlarges the
descriptor block tag format to allow for full 32-bit checksums of
journal blocks, fix the journal tag function to return the correct
sizes, and fix the jbd2 recovery code to use feature flags to
determine 64bitness.
Add a few function helpers so we don't have to open-code quite so
many pieces.
Switching to a 16-byte block size was found to increase journal size
overhead by a maximum of 0.1%, to convert a 32-bit journal with no
checksumming to a 32-bit journal with checksum v3 enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reported-by: TR Reardon <thomas_reardon@hotmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Per http://www.gnu.org/software/checker/ the gcc "-checker" option
is long deprecated. Nuke it from e2fsprogs.
Most people would never hit this, but people who love to turn knobs,
such as the reporter of kernel.org bz#74171, might run into it and be
sad.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix some minor bugs relating to passing CFLAGS to cppcheck, and
package the cppcheck output into nicer looking reports.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Adding the pkgconfigdir variable allows specifying an installation
location for pkg-config files independent of libdir.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In C++, "private" is a reserved keyword, so don't use it in the header
file as a function parameter name.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In practice, it is **extremely** rare for users to try to use more
than the first backup superblock located at the beginning of block
group #1. (i.e., at block number 32768 for file systems with a 4k
block size). This new compat feature restricts the backup superblock
to block group #1 and the last block group in the file system.
Aside from reducing the overhead of the file system by a small number
of blocks, by eliminating the rest of the backup superblocks, it
allows us to have a much more flexible metadata layout. For example,
we can force all of the allocation bitmaps and inode table blocks to
the beginning of the disk, which allows most of the disk to be
exclusively used for contiguous data blocks.
This simplifies taking advantage of certain HDD specific features,
such as Shingled Magnetic Recording (aka Shingled Drives), and the
TCG's OPAL Storage Specification where having a simple mapping between
LBA block ranges and the data blocks used by the file system can make
life much simpler.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a LOG2_CHECK mode for check_super_value() so that it is easy
to verify values that are supposed to be power-of-two values
(s_desc_size and s_inode_size so far). In ext2fs_check_desc()
also check for a power-of-two s_desc_size.
Print out s_desc_size in debugfs "stats" and dumpe2fs output, if
it is non-zero.
It turns out that the s_desc_size validation in check_super_block()
is not currently used by e2fsck, because the group descriptors are
verified earlier by ext2fs_check_desc(), and even without an
explicit check of s_desc_size the group descriptors fail to align
correctly on disk. It makes sense to keep the check_super_block()
regardless, in case the code changes at some point in the future.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Run sparse against source files when building e2fsprogs with 'make C=1'. If
instead C=2, it configures basic ext2 types for bitwise checking with sparse,
which can help find the (many many) spots where conversion errors are
(possibly) happening.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
parse_num_blocks2() wrongly did:
num << 1;
when log_block_size < 0. That is obviously wrong as such statement has
no effect (and the compiler properly warns about it). Callers expect
returned value to be in bytes when log_block_size < 0 so fix the
statement accordingly.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously the behavior of parse_num_block2 was undefined if
log_block_size was less than zero. It will now return a number in
units of bytes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
[ Also teach libe2p's print_flags() function to display this flag so
that lsattr will allow us to see whether a file has inline data or not.
--tytso ]
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is what the patches from Zhen Liu uses, so let's make this change
now to keep things easier. INCOMPAT_INLINE_DATA also looks better
IMHO. :-)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Modify the dump code to print information about jbd2 v2 checksum data.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Record the type of checksum algorithm we're using for metadata in the
superblock, in case we ever want/need to change the algorithm.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change the include path in the Cflags field so that #include
<lib/foo.h> and <foo.h> will work. We had originally used a C flags
which allowed <foo.h> to work, but many applications (especially those
not using pkg-config) had been using the <lob/foo.h> formulation which
didn't require an explicit -I{$includedir} option to the C compiler.
If those applications then converted over to pkg-config, and the
e2fsprogs libraries were installed with a prefix other than /usr, so
that the header files were in some directory such as
/usr/local/include, a program that used #include <lib/foo.h> would
fail to compile.
So change the pkg-config files to include both -I{$includedir} and
-I{$includir}/lib.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The replica is a feature which stores multiple copies of the key
metadata blocks so a single block failure in failure-prone media
(read: certain types of flash storage) doesn't take out the entire
file system.
Discussion on the upstream list proved not to be very positive on this
feature; the arguments were that it added complexity that wasn't
warrented, since common practice in industry is to insist on reliable
media, and if media is unreliable, you're kind of toast anyway (unless
the file system is being used as the back-end store of a cluster file
system where checksuming and data replication is happening above the
local disk file system level). So, this feature is being developed
out of tree.
We reserve the code points so that other people won't accidentally
step on them. Since it's not upstream, it's a soft reservation, but
it's not like we have any shortage of RO_COMPAT features. We are a
bit more tight on reserved inodes, but EXT2_BOOT_LOADER_INO and
EXT2_UNDEL_DIR_INO are not currently used anywhere, and
EXT2_EXCLUDE_INO is a reservation for another out-of-tree feature.
There are no features currently being discussed which require a
reserved inode, but if a need were to arise, we can claw back code
point reservations that were never used or not in tree, as those will
always be considered lower priority than in-tree features.
Cc: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Multi-mount protection is feature that allows mke2fs, e2fsck, and
others to detect if the filesystem is mounted on a remote node (on
SAN disks) and avoid corrupting the filesystem. For e2fsprogs this
means that it checks the MMP block to see if the filesystem is in use,
and marks the filesystem busy while e2fsck is running on the system.
This is useful on SAN disks that are shared between high-availability
servers, or accessible by multiple nodes that aren't in HA pairs. MMP
isn't intended to serve as a primary HA exclusion mechanism, but as a
failsafe to protect against user, software, or hardware errors.
There is no requirement that e2fsck updates the MMP block at regular
intervals, but e2fsck does this occasionally to provide useful
information to the sysadmin in case of a detected conflict.
For the kernel (since Linux 3.0) MMP adds a "heartbeat" mechanism to
periodically write to disk (every few seconds by default) to notify
other nodes that the filesystem is still in use and unsafe to modify.
Originally-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The EOPNOTSUPP case is unreachable, being outside a set of:
#if
...
return;
#else
...
return;
#endif
Fix this up so that if neither HAVE_CHFLAGS nor
HAVE_EXT2_IOCTLS applies, we set EOPNOTSUPP.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Li Xi