Provide an API to set i_size in an inode and take care of all required
feature flag modifications. Refactor the code to use this new
function.
[ Moved the function to lib/ext2fs/blk_num.c, which is the rest of
these sorts of functions live, and renamed it to be
ext2fs_inode_size_set() instead of ext2fs_inode_set_size() to be
consistent with the other functions in in blk_num.c -- tytso ]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are a number of places where we need convert groups to blocks or
clusters by multiply the groups by blocks/clusters per group.
Unfortunately, both quantities are 32-bit, but the result needs to be
64-bit, and very often the cast to 64-bit gets lost.
Fix this by adding new macros, EXT2_GROUPS_TO_BLOCKS() and
EXT2_GROUPS_TO_CLUSTERS().
This should fix a bug where resizing a 64bit file system can result in
calculate_minimum_resize_size() looping forever.
Addresses-Launchpad-Bug: #1321958
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The s_desc_size in the superblock specifies the group descriptor
size in bytes, but in various places the EXT4_FEATURE_INCOMPAT_64BIT
flag implies that the descriptor size is EXT2_MIN_DESC_SIZE_64BIT
(64 bytes) instead of checking the actual size. In other places,
the s_desc_size field is used without checking for INCOMPAT_64BIT.
In the case of ext2fs_group_desc() the s_desc_size was being ignored,
and assumed to be sizeof(struct ext4_group_desc), which would result
in garbage for any but the first group descriptor. Similarly, in
ext2fs_group_desc_csum() and print_csum() they assumed that the
maximum group descriptor size was sizeof(struct ext4_group_desc).
Fix these functions to use the actual superblock s_desc_size if
INCOMPAT_64BIT.
Conversely, in ext2fs_swap_group_desc2() s_desc_size was used
without checking for INCOMPAT_64BIT being set.
The e2fsprogs behaviour is different than that of the kernel,
which always checks INCOMPAT_64BIT, and only uses s_desc_size to
determine the offset of group descriptors and what range of bytes
to checksum.
Allow specifying the s_desc_size field at mke2fs time with the
"-E desc_size=NNN" option. Allow a power-of-two s_desc_size
value up to s_blocksize if INCOMPAT_64BIT is specified. This
is not expected to be used by regular users at this time, so it
is not currently documented in the mke2fs usage or man page.
Add m_desc_size_128, f_desc_size_128, and f_desc_bad test cases to
verify mke2fs and e2fsck handling of larger group descriptor sizes.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Provide a field in the block group descriptor to store inode bitmap
checksum, and some helper functions to calculate and verify it.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Code to count the number of blocks in the last partial
group is cut and pasted around the e2fsprogs codebase
a few times.
Making this a helper function should improve matters.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Creating a 4TB file on a filesystem with the 64bit flag set results in
e2fsck consistently complaining about i_blocks being wrong, with
confusing messages like this:
Inode 29818882, i_blocks is 8388608816, should be 8388608816. Fix? no
That appears to be caused by ext2fs_inode_i_blocks() checking for the
EXT4_FEATURE_RO_COMPAT_HUGE_FILE in the wrong place. Fix it.
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To prevent direct array indexing of fs->group_desc[i] (because the
group_desc may be a different size for different filesystems) make it
an opaque pointer that may only be accessed through the accessor
functions in blknum.c. The type itself is still available in a public
header; if we have a group_desc that we know is one type or another,
it's ok to access its fields directly. This change only prevents us
from indexing off fs->group_desc[i] directly.
Old-style applications who don't want to change their source code can
(as a temporary short-term hack) #define EXT2FS_OLD_32_COMPAT before
including ext2fs.h.
Change the accessors in blknum.c to use ext4fs_group_desc(), a version
of ext2fs_group_desc() which returns a ext4_group_desc pointer.
This simplifies and collapses a fair bit of code in blknum.c
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Several routines in lib/ext2fs/blknum.c:
ext2fs_bg_free_blocks_count()
ext2fs_bg_free_inodes_count()
ext2fs_bg_used_dirs_count()
ext2fs_bg_itable_unused()
and their _set() counterparts, operate as if they are dealing with
blk64_t quantities, but they should be dealing with __u32 counts
instead.
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add new blknum.c file which contains funtions to handle blk64_t and
low/high values in super blocks and inodes.
(Includes fixes from Nick Dokos, and additions from Valerie Aurora Henson)
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o