When calculating the number reserved blocks, use floating point for
better accuracy, since for big filesystems it really makes a
difference. In addition, mke2fs and tune2fs accepts a floating point
number from the user, so they should provide that level of accuracy.
Addresses-Debian-Bug: #452639
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The combination of meta_bg and resize_inode leads to a corrupt
filesystem, and it's not really clear it makes any logical sense.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously, fsck was only passing in -Cn to the first e2fsck process
to start up, and enabling the progress information by sending a
SIGUSR1 signal. This didn't work if the progress information was
intended to go to file descriptor, since the information was never
passed to e2fsck.
So we now pass the progress fd in as a negative number if the progress
information is intended to be initially suppressed.
Addresses-Launchpad-Bug: #203323
Addresses-Sourceforge-Bug: #1926023
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The exiting fsck instance wasn't marked as DONE, so the safety checks
thought a progress bar was still in progress, and so we didn't enable
another filesystem's checking.
Addresses-Debian-Bug: #432865
Addresses-Launchpad-Bug: #203323
Addresses-Sourceforge-Bug: #1926023
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to set tm_isdst to -1 so that mktime will automatically
determine whether or not daylight savings time (DST) is in effect.
Previously tm_isdst was set to 0, which caused mktime to interpret the
time as if it was always not using DST.
Addresses-Debian-Bug: #471882
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
SuSE's security team audited uuidd and came up with these issues.
None of them are serious given that uuidd runs setuid as a
unprivileged user which has no special access other than libuuid
directory, but it's good to get them fixed.
Signed-off-by: Matthias Koenig <mkoenig@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Clearing SPARSE_SUPER is dangerous; it can result in a filesystem
which e2fsck can't fix easily. Since there is very few good reasons
for wanting to turn this feature off, disable tune2fs's abiity to do
this. Users who really want this can use debugfs.
Also, deprecate the tune2fs -s option. Remove it from the man page
and usage message.
Addresses-Sourceforge-Bug: #1840286
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make debugfs and tune2fs reference each other in the "SEE ALSO"
section.
Addresses-Sourceforge-Patches: #1399325
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously we just let the kernel and e2fsck do this automatically,
but e2fsck will no longer automatically clear the large_file feature.
It still isn't really necessary to worry about this feature flag
explicitly, but some users seem to care.
Addresses-Red-Hat-Bugzilla: #258381
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The dumpe2fs syntax documented in the man page has been broken for
some time due to getopt() changes. Change the option syntax in
dumpe2fs to be one which is more extensible and consistent with the
format for extended options in mke2fs and tune2fs.
Addresses-Sourceforge-Bug: #1830994
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This requires an fsck aftwards. We don't allow setting the
resize_inode feature because extensive work to tune2fs or e2fsck to
safely relocate blocks is necessary in order to reserve the blocks
needed by the resize inode.
Addresses-Red-Hat-Bugzilla: #167816
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use a more abstract set of feature tests to avoid merge conflicts as
we add support for new features in the maint, master, next, and pu git
branches.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is useful for mballoc to align block allocation on the RAID
stripe boundaries.
Signed-off-by: Rupesh Thakare <rupesh@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Adapted from the SuSE patch, but fixes a number of very serious
problems with the patch in SLES:
1) This changeset uses -M instead of -m; most lowercase options are
reserved for use by the filesystem-specific fsck programs. All new
fsck options must be upper case.
2) This changeset will skip the root filesystem in "fsck -AM", which
the SLES patch will not do.
3) Loading /proc/mounts into the fs_info can cause -t opts matching to
malfuction. So this changeset uses a simplified version of the
ismounted.c function from the ext2fs library.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The pid file was getting created before the fork(), so it had the
incorrect pid number. No one noticed for a while, since "uuidd -k"
will kill the daemon and it has enough automatic convenience functions
that it's usually not necessary to refer to the pid file except as a
convenient place for uuidd to lock against multiple instances of the
daemon starting up.
Addresses-Sourceforge-Bug: #1893244
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This isn't necessary since we don't install the init.d script (and
it's not the recommended way to start uuidd anyway).
Addresses-Sourceforge-Bug: #1885085
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since recent kernels have a tendency to set this feature willy-nilly,
let's just enable by default. It's only very old kernels that don't
support it any more.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This makes it easier to upgrade to ext4 in the future, and it speeds
up extended attributes handling --- important on SELinux systems!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The test_fs flag is an "ok to be used with test kernel code" flag. It
makes it easier for us to determine whether a filesystem should be
mounted using ext4 or not.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the disk fills while e2image is writing its output file, it will
spew a large number of error messages instead of exiting with a
non-zero status code after the first failure.
Addresses-Sourceforge-Feature-Request: #606508
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a configure option which causes the uuidd helper daemon not to be
built or used by the uuid library.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use an improved locking protocol based on the pid file to assure that
only one uuidd is started. Apparently the kernel does not prevent
multiple processes from racing to bind to a Unix domain socket.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also store the clock sequence information in a state file in
/var/lib/misc/uuid-clock so that if the time goes backwards the clock
sequence counter can get bumped. This allows us to completely
correctly generate time-based (version 1) UUID's according to the
algorithm specified RFC 4122.
Addresses-Sourceforge-Bug: #1529672
Addresses-Red-Hat-Bugzilla: #233471
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fuse and ssh fstab lines such as:
wdfs#https://dav.hoster.com/foo/bar /mnt/hoster fuse user,noauto 0 0
will cause fsck to issue warnings about invalid fstab lines, because
fsck was previously treating '#' as a comment when it appeared
anywhere in an fstab line, not just at the beginning of the line.
Addresses-Gentoo-bug: #195405
Addresses-Sourceforge-bug: #1826147
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When printing the value of tags in a formatted format, print control
characters and characters with the high eight bit set using the ^ and
M- notation, respectively. This prevents a filesystem with a garbage
label from potentially screwing up the user's screen (for example,
putting it into graphical mode).
Addresses-Ubuntu-Bug: #78087
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In raw mode (-r), e2image appends an extra byte to the image-file's
end if the last block requires a sparse write. Consequently, the
resulting image-file is one byte larger than the original in
size. This patch fixes the problem by seeking to one less than the
given offset, so that the byte write does not overflow into the next
block.
This problem can be reproduced by doing an e2image -r dev image-file
and comparing the original and resulting image sizes. This assumes the
image is sparse at the end. For my tests, I created a 100MB sparse
image with two files.
Signed-off-by: Arun Thomas <thomasar@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The -R option is only used for backwards compatibility, and -E is
preferred, so change the usage message accordingly.
Signed-off-by: Coly Li <coyli@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a user specifies a bind mount with a non-zero fsck pass number, for
example:
/foo /bar ext3 bind,defaults 1 3
print a warning and ignore the fstab entry.
Addresses-Red-Hat-Bugzilla: #151533
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix up $(root_sysconfdir) handling misc/Makefile.in so that
make install and make uninstall works correctly when $prefix != /.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
People are getting surprised by mke2fs creating filesystems with
different defaults than earlier versions of mke2fs if mke2fs.conf is
not present. Having gotten two complaints about ramdisks getting
created by with 4k blocksizes which then blow up when the ramdisk is
mounted with a "Magic mismatch, very weird" error message from the
kernel, let's fix this by making sure mke2fs has a built-in version of
mke2fs.conf file. People can still override the built-in version of
mke2fs.conf by editing /etc/mke2fs.conf, but this maintains the
previous behavior.
Addresses-Sourceforge-Bug: #1745818
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o