Mostly by adding static and removing excess extern qualifiers. Also
convert a few remaining non-ANSI function declarations to ANSI.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Quiet a number of simple compiler warnings:
- pointers not initialized by ext2fs_get_mem()
- return without value in non-void function
- dereferencing type-punned pointers
- unused variables
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In inode_open(), if the allocation of &io fails, we go to cleanup
and dereference io to test io->name, which is a bug.
Similarly in undo_open() if allocation of &data fails, we
go to cleanup and dereference data to test data->real.
In the test_open() case we explicitly set retval to the only
possible error return from ext2fs_get_mem(), so remove that
for tidiness.
The other changes just make make earlier returns go through
the error goto for consistency.
In many cases we returned directly from the first error, but
"goto cleanup" etc for every subsequent error. In some
cases this leads to "impossible" tests such as:
if (ptr)
ext2fs_free_mem(&ptr)
on paths where ptr cannot be null because we would have
returned directly earlier, and Coverity flags this.
This isn't really indicative of an error in most cases, but
I think it can be clearer to always exit through the error goto
if it's used later in the function.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext2fs_add_dir_block() the dblist allocation size was changed to
grow as the number of items in the dblist increases. However, the
error handling in case of allocation failure wasn't changed to match.
Fix the error case to revert to the old allocation size on failure.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make the dblist grow more quickly when many directory blocks are added,
otherwise the array has to get copied too often, which is slow when it
is large.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add two new functions which allows the caller to examine the last
directory block entry added to the list, and to drop if it necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This addresses a potential security vulnerability where an untrusted
filesystem can be corrupted in such a way that a program using
libext2fs will allocate a buffer which is far too small. This can
lead to either a crash or potentially a heap-based buffer overflow
crash. No known exploits exist, but main concern is where an
untrusted user who possesses privileged access in a guest Xen
environment could corrupt a filesystem which is then accessed by the
pygrub program, running as root in the dom0 host environment, thus
allowing the untrusted user to gain privileged access in the host OS.
Thanks to the McAfee AVERT Research group for reporting this issue.
Addresses CVE-2007-5497.
Signed-off-by: Rafal Wojtczuk <rafal_wojtczuk@mcafee.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
using a non-zero hash version (i.e., half MD4 or TEA hash).
The hash version wasn't getting copied into dx_dir->hashversion and
this caused the kernel to treat all directories if they were using the
legacy hash, which was Bad.
alloc.c, bb_inode.c, bitmaps.c, bitops.h, block.c, bmap.c, bmove.c,
brel.h, cmp_bitmaps.c, dblist.c, dblist_dir.c, dir_iterate.c,
expanddir.c, ext2fs.h, ext2fsP.h, fileio.c, finddev.c, get_pathname.c,
icount.c, inode.c, irel.h, irel_ma.c, ismounted.c, link.c, lookup.c,
mkdir.c, mkjournal.c, namei.c, newdir.c, read_bb_file.c, test_io.c,
tst_iscan.c, unix_io.c, unlink.c: Change use of ino_t to ext2_ino_t,
to protect applications that attempt to compile
-D_FILE_OFFSET_BITS=64, since this inexplicably changes ino_t(!?). So
we use ext2_ino_t to avoid an unexpected ABI change.
rw_bitmaps.c: Fixed signed/unsigned warnings.
fileio.c (ext2fs_file_set_size): Remove unneeded extern from the
function declaration.
dblist.c (make_dblist): Add safety check in case the dblist pointer
passed in is null (in which case, assign it to fs->dblist). Fixed
some signed/unsigned warnings.
bmap.c: Make addr_per_block be of type blk_t to avoid signed/unsigned
warnings.
namei.c (ext2fs_follow_link): Remove uneeded extern from the function
declaration.
get_pathname.c (get_pathname_proc): Use return value from
ext2fs_get_mem, instead of checking if &gp->name is NULL.
dir_iterate.c (ext2fs_process_dir_block):
dblist_dir.c (ext2fs_dblist_dir_iterate): Remove uneeded extern from
the function declaration.
block.c (ext2fs_block_iterate2): If the read_inode call fails, return
the error directly instead of jumping to the cleanup routine, since we
don't need to do any cleanup.
alloc_table.c (ext2fs_allocate_group_table): Make this function take a
dgrp_t for its group argument.
ext2fs.h: Make dgrp_t an __u32 type, and make fs->desc_group_count be
of type dgrp_t.
pass1.c (process_inode_cmp): Use EXT2_QSORT_TYPE to define the
appropriate return type for comparison functions for qsort.
e2fsck.h: Add #ifdef protection for unistd.h
super.c: Remove header files already included by e2fsck.h
ChangeLog, dblist.c, ext2fs.h:
ext2fs.h: Define EXT2_QSORT_TYPE appropriately for the return type for
comparison functions for qsort.
dblist.c (dir_block_cmp): Use EXT2_QSORT_TYPE in function declaration.
ChangeLog, extent.c:
extent.c (ext2fs_create_extent_table): Use ext2fs_free_mem instead of
free().
(extent_cmp): Use EXT2_QSORT_TYPE to define the appropriate return
type for comparison functions for qsort.
ext2fs.h, bitops.h: Add support for the Watcom C compiler to do inline
functions.
ext2fs.h, dosio.c: Use asm/types.h instead of linux/types.h to evade a
potential problem with glibc's header files trying to spike out
linux/types.h.
ext2fs.h (ext2fs_resize_mem): Change the function prototype to include
the old size of the memory, which is needed for some braindamaged
memory allocation systems that don't support realloc().
badblocks.c (ext2fs_badblocks_list_add):
bb_inode.c (clear_bad_block_proc):
dblist.c (ext2fs_add_dir_block):
icount.c (insert_icount_el):
irel_ma.c (ima_put):
rs_bitmap.c (ext2fs_resize_generic_bitmap): Update functions to pass
the old size of the memory to be resized to ext2fs_resize_mem().
ChangeLog, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Update function to pass the old size
of the memory to be resized to ext2fs_resize_mem().
ChangeLog, extent.c, resize2fs.c:
resize2fs.c (adjust_superblock):
extent.c (ext2fs_add_extent_entry): Update functions to pass the old
size of the memory to be resized to ext2fs_resize_mem().
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
Added definition of ext2fs_get_mem, ext2fs_free_mem, and
ext2fs_resize_mem in ext2fs.h, and changed all library routines to use
these wrapper functions.
Fix buggy use of the INLINE macros.
ChangeLog, dblist.c, ext2_err.et.in, mkdir.c:
dblist.c, mkdir.c: use EXT2_DIR_EXISTS and EXT2_DB_NOT_FOUND instead
of the system error messages.
ext2_err.et.in: Added new error messages EXT2_DIR_EXISTS and
EXT2_DB_NOT_FOUND
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
dosio.c: New file to do DOS/BIOS disk accesses.
namei.c (open_namei): Make pathlen be of type size_t.
llseek.c: Always #include stdlib.h since it's need to define
size_t.
io.h: Use errcode_t for magic numbers.
icount.c (get_icount_el), dupfs.c (ext2fs_dup_handle), dblist.c
(dir_block_cmp): Use size_t where appropriate.
read_bb.c (ext2fs_read_bb_inode), cmp_bitmaps.c
(ext2fs_compare_inode_bitmap): Use blk_t, ino_t and size_t
where appropriate.
closefs.c (ext2fs_flush): Use dgrp_t instead of int where
appropriate.
openfs.c (ext2fs_open), check_desc.c (ext2fs_check_desc): Use blk_t
instead of int where appropriate.
rw_bitmaps.c (read_bitmaps), irel_ma.c, inode.c (ext2fs_write_inode),
initialize.c (ext2fs_initialize): brel_ma.c: Fix to make be
16-bit safe.
link.c (ext2fs_link), unlink.c (ext2fs_unlink), lookup.c (lookup_proc),
ismounted.c (ext2fs_check_if_mounted), block.c (xlate_func):
Add #pragma argsused for Turbo C.
block.c (ext2fs_block_iterate2): Use retval which is a errcode_t type.
bitmaps.c (make_bitmap): Use size_t instead of int where appropriate.
bb_inode.c (set_bad_block_proc): Add #pragma argsused for Turbo C.
alloc.c (ext2fs_new_inode): Use ino_t instead of int for the group number.
get_pathname.c: Use ino_t instead of int where appropriate.
ext2fs.h: Make the magic structure element be errcode_t instead of int.
alloc.c alloc_tables.c badblocks.c bb_compat.c bb_inode.c
bitmaps.c block.c bmove.c brel_ma.c check_desc.c closefs.c
cmp_bitmaps.c dblist.c dblist_dir.c dir_iterate.c dirblock.c
dupfs.c expanddir.c freefs.c get_pathname.c icount.c
initialize.c inline.c inode.c irel_ma.c link.c llseek.c
lookup.c mkdir.c namei.c newdir.c read_bb.c read_bb_file.c
rs_bitmap.c rw_bitmaps.c swapfs.c test_io.c tst_badblocks.c
tst_iscan.c unix_io.c unlink.c valid_blk.c version.c: Add an
#ifdef for HAVE_UNISTD_H
bmove.c (ext2fs_move_blocks): New function which takes a bitmap of
blocks which need to be moved, and moves those blocks to another
location in the filesystem.
rs_bitmap.c (ext2fs_resize_generic_bitmap): When expanding a bitmap,
make sure all of the new parts of the bitmap are zero.
bitmaps.c (ext2fs_copy_bitmap): Fix bug; the destination bitmap wasn't
being returned to the caller.
alloc_tables.c (ext2fs_allocate_group_table): Add new function
ext2fs_allocate_group_table() which sets the group tables for a
particular block group. The relevant code was factored out of
ext2fs_allocate_tables().
dblist.c (make_dblist): Adjust the initial size of the directory block
list to be a bit more realize (ten plus twice the number of
directories in the filesystem).
Check in interim work.