ext2fs_free() does not set the ext2_filsys pointer to null so the
caller is responsible to setting it himself if it is needed.
This patch fixes some places where caller did not set ext2_filsys
pointer to NULL after ext2fs_free() which might result in use after
free. Fix it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On a filesystem with 1K blocks and meta_bg enabled, opening a
filesystem with automatic superblock detection tries to compensate for
the fact that the superblock lives in block 1. However, the method by
which this is done is later misinterpreted to mean "read the backup
group descriptors", which is not what we want in this case.
Therefore, in ext2fs_open3() separate the 'group zero' adjustment into
its own variable so that we don't get fed backup group descriptors
when we try to load meta_bg group descriptors.
Furthermore, enhance ext2fs_descriptor_block_loc2() to perform its own
group zero correction. The other caller of this function neglects to
do any group-zero correction of their own, so this fixes them too.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext2fs_descriptor_block_loc2() is called with a meta_bg filesystem
and group_block is not the normal value, the function will return the
location of the backup group descriptor block in the next block group.
Unfortunately, it fails to account for the possibility that the backup
group contains a backup superblock but the regular superblock does
not. This is the case with block groups 48-49 on a meta_bg fs with 1k
blocks; in this case, libext2fs will fail to open the filesystem.
Therefore, teach the function to adjust for superblocks in the backup
group, if necessary.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These memory leaks were discovered by using "valgrind
--leak-check=full" while running "e2image -I bar.img foo.e2i"
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
e2image manually opens a new IO channel, and then sets the file system
to use this new IO channel via ext2fs_rewrite+to_io(). We need to
make sure the IO channel is set to the file system's block size to
avoid some nasty buffer overruns.
[ Modified by tytso to use io_channel_set_blksize() ]
Signed-off-by: Kit Westneat <kwestneat@ddn.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Currently, only the new 64-bit bitmap implementation supports the
block<->cluster conversions that bigalloc requires. Therefore, if we
have a bigalloc filesystem, require EXT2_FLAGS_64BITS be passed in to
ext2fs_open(). This does not mean that bigalloc file systems have to
be 64-bits; just that the userspace utilities have to be able to use
the new 64-bit capable library functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
The addition of MMP code was added in the wrong place, so ret_fs could
get set (and EXT2_FLAG_NOFREE_ON_ERROR was cleared as well, which
could confuse e2fsck which depends on this flag being cleared if
ext2fs_open2() succeeded.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the block group algorithm to use the same algorithm as the rest
of the metadata_csum. This mostly involves providing a helper
function to tell if group descriptors should have checksums set or
verified, and modifying the gdt checksum code to use the correct
algorithm.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Record the type of checksum algorithm we're using for metadata in the
superblock, in case we ever want/need to change the algorithm.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Calculate and verify the superblock checksums. Each copy of the
superblock records the number of the group it's in and the FS UUID, so
we can simply checksum the whole block.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Precompute the FS UUID checksum seed that is used for all metadata
checksumming operations and store it in ext2_filsys.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since various parts of the library depend on the value of s_desc_size,
check to make sure it is the correct, expected value based on the file
system features.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create a new function, io_channel_alloc_buf() which allocates I/O
buffers with appropriate alignment if we are using direct I/O. The
original code was sometimes using a larger alignment factor than
necessary, and would always request an aligned memory buffer even when
it was not necessary since the block device was not opened with
O_DIRECT.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the file system is read/only opened with a backup superblock, and
the file system has uninit_bg enabled, the super block must not be
marked as dirty; otherwise, ext2fs_close() will call ext2fs_flush(),
which will fail, since the file descriptor for the block device was
opened read/only, and then the file descriptor won't actually be
closed.
This is normally not a problem since most of the time the program will
exit shortly after calling ext2fs_close(), and many programs don't
bother checking the error return from ext2fs_close(), especially if
the file system was opened read/only.
A big exception to this is e2fsck, since it opens and close the file
systems during its startup, and to make matters worse, registers an
error handler which will noisly complain about the failed writes
caused by ext2fs_flush().
Fix this by not marking the superblock as dirty if the file system was
opened read/only. The changes to the block group descriptors to clear
the uninit bits will still happen, so that e2fsck -n will properly
scan the whole file system. However, those changes will get dropped
when the file system handle is closed.
Addresses-SourceForge-Bug: #3444351
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we have to read the backup group descriptor checksums, the UNINIT
flags are cleared to ensure that all of the inodes in the filesystem
are scanned. However, the code that reset the UNINIT flags did not
reset the group checksum, and this produced many spurious error
messages in e2fsck.
Group descriptor 0 checksum is invalid. FIXED.
Group descriptor 1 checksum is invalid. FIXED.
:
:
Recompute checksums after modifying group descriptors to avoid these
error messages. Remove expected error messages in f_illitable_flexbg.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Without this change, we go back to getting group descriptor
"0" each time we go around the "for i" loop. It must properly
advance through the filesystem.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Multi-mount protection is feature that allows mke2fs, e2fsck, and
others to detect if the filesystem is mounted on a remote node (on
SAN disks) and avoid corrupting the filesystem. For e2fsprogs this
means that it checks the MMP block to see if the filesystem is in use,
and marks the filesystem busy while e2fsck is running on the system.
This is useful on SAN disks that are shared between high-availability
servers, or accessible by multiple nodes that aren't in HA pairs. MMP
isn't intended to serve as a primary HA exclusion mechanism, but as a
failsafe to protect against user, software, or hardware errors.
There is no requirement that e2fsck updates the MMP block at regular
intervals, but e2fsck does this occasionally to provide useful
information to the sysadmin in case of a detected conflict.
For the kernel (since Linux 3.0) MMP adds a "heartbeat" mechanism to
periodically write to disk (every few seconds by default) to notify
other nodes that the filesystem is still in use and unsafe to modify.
Originally-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
EXT2_LIB_SOFTSUPP_INCOMPAT_* are supposed to be bitmasks
of features which can be opened even though they are
under development. The intent is that these are masked
out of the features list, so that they will be ignored
on open.
However, the code does a logical not vs. a bitwise not:
features &= !EXT2_LIB_SOFTSUPP_INCOMPAT;
which will not have the desired effect...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The dump program relies on fs->frag_size and the
EXT2_FRAGS_PER_BLOCK() macro. Kind of silly for it to do so, but it's
part of the kludgy way the dump program (which was originally written
for the BSD FFS was ported over to support ext2/3.) Given how it
makes assumptions about the ext2/3/4 file system being similar to the
BSD FFS, it's a bit of a miracle it works for ext4 --- or at least
appears to work...
Addresses-Debian-Bug: #636418
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Filesystems with a blocksize of 1024 have the superblock starting at
block #1. However, the first data block in the superblock is 0 to
simplify the cluster calculations. So we must compensate for this in
a number of places, mostly in the ext2fs library, but also in e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The log2 of the ratio of cluster size to block size is far more useful
than just storing the cluster size. So make this change, and then
define basic utility macros: EXT2FS_CLUSTER_RATIO(),
EXT2FS_CLUSTER_MASK(), EXT2FS_B2C(), EXT2FS_C2B(), and
EXT2FS_NUM_B2C().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext2fs_open() check to make sure the cluster size superblock field
is the same as the block size field when the bigalloc feature is not
set. This is necessary since we will start introducing calculations
based on the cluster size field.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds the superblock fields needed so that dumpe2fs works and the
code points and renames the superblock fields from describing
fragments to clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allocate various memory structures to be properly aligned to avoid
needing to use a bounce buffer when doing direct I/O read/writes.
This should also help on FreeBSD systems which require aligned buffers
unconditionally.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds the basic support for Direct I/O to unix_io.c, and adds a
new flag EXT_FLAG_DIRECT_IO which can be passed to ext2fs_open() or
ext2fs_open2() to request Direct I/O support.
Note that device mapper devices in Linux don't support Direct I/O, and
in some circumstances using Direct I/O can actually make performance
*worse*!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These patches fix obvious bone-headed mistakes, so e2fsprogs will now
build and mostly work on powerpc. The m_meta_bg, u_mke2fs, and
u_tune2fs tests are still failing, however, so there's still work to do...
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>