The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck modifies certain superblock fields which the kernel doesn't
look at, mark the superblock as dirty without marking the file system
as changed. This will avoid e2fsck signalling the init scripts that a
reboot is necessary. This is safe, because the kernel doesn't
actually look at these superblock fields.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystems with a blocksize of 1024 have the superblock starting at
block #1. However, the first data block in the superblock is 0 to
simplify the cluster calculations. So we must compensate for this in
a number of places, mostly in the ext2fs library, but also in e2fsck.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Treat the s_blocks_count field in the superblock as a free block count
(instead of the number of free clusters) for bigalloc file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 2a77a784a3 (firest released in e2fsprogs 1.33) compared
superblock summary free blocks and inode counts with the allocation
bitmap counts before starting the file system check proper, and if
they differed, set the superblock and marked it as dirty. If no other
file systme changes were required, this would cause a "*** FILE SYSTEM
WAS MODIFIED ***" message without any explanation of what e2fsck had
changed.
We fix this by only setting the superblock summary free block/inodes
counts if we are skipping a full check, and in non-preen mode, e2fsck
will now print an explicit message stating how the superblock had been
updated.
In a full check, any updates to the superblock free blocks/inodes
fields will be noted in pass5.
This change requires changing a few test results (essentially
reversing the changes made in commit 2a77a784a3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds the superblock fields needed so that dumpe2fs works and the
code points and renames the superblock fields from describing
fragments to clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are broken embedded devices that have system clocks that always
reset to January 1, 1970 whenever they boot (even if no power is
lost). There are also systems that have super cheap clock crystals
that can be very inaccurate. So if the option broken_system_clock is
given, disable all time based checks. E2fsck will also try to detect
incorrect system clock times, and automatically mark the system clock
as insane.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unfortunately, due to Windows' unfortunate design decision to
configure the hardware clock to tick localtime, instead of the more
proper and less error-prone UTC time, many users end up in the
situation where the system clock is incorrectly set at the time when
e2fsck is run.
Historically this was usually due to some distributions having buggy
init scripts and/or installers that didn't correctly detect this case
and take appropriate countermeasures. However, it's still possible,
despite the best efforts of init script and installer authors to not
be able to detect this misconfiguration, usually due to a buggy or
misconfigured virtualization manager or the installer not having
access to a network time server during the installation process. So
by default, we allow the superblock times to be fudged by up to 24
hours. This can be disabled by setting options.accept_time_fudge to
the boolean value of false in e2fsck.conf. The old
options.buggy_init_scripts is left for backwards compatibility.
Since we are now accepting the 24 hour time fudge by default, there is
no longer a need to install an Ubuntu-specific e2fsck.conf file, so we
can remove it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixed a bug where e2fsck would report that last mount time was in the
future when it was really the last write time that was in the future.
Also, since people can't seem to believe that (a) their distribution
has buggy init scripts, or (b) their CMOS/RTC clock or backup battery
is dead, print the incorrect time and the current system time.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unfortunately, distributions like Ubuntu seem to have buggy init
scripts that run e2fsck and mount the root filesystem before making
sure the system time and time zone is correctly set. As a result, a
filesystem's last write and last mounted time can be set in future.
The buggy_init_scripts configuration option will stop e2fsck from
aborting the boot process, but it also inhibits the superblock times
from getting fixed. This causes resize2fs to refuse to resize the
filesystem, even after running e2fsck on the file system. To deal
with this, we need to fix the superblock write times unconditionally.
Addresses-Launchpad-bug: #373409
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck needs to check to see if the backup superblock differs from the
primary superblock. Previously it was doing so by calling
ext2fs_open(), which does a lot of unnecessary work, including reading
all of the backup block group descriptors. Avoid this by reading in
the backup superblock directly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move check_resize_inode() out of check_super_block(), since we only
need to test the resize_inode for correctness only if the filesystem
requires checking. This change avoids a lot of I/O operations which
slows down a 1 second boot.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we resize online, the primary superblock gets copied to all
the backups, and of course since we're mounted the NEEDS_RECOVERY
flag is set. A subsequent fsck will find the backups have the
NEEDS_RECOVERY flag set while the primary does not, and this
forces a full fsck pass.
I think this flag can be safely ignored in the flag comparisons.
Addresses-Red-Hat-Bugzilla: #471925
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
An deliberately corrupted filesystem with an insanely large
s_first_ino field could cause e2fsck to crash with a seg fault.
Thanks to Eric Sesterhenn for supplying test cases which demonstrated
this issue.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This simplifies the code, and using the uninit_bg with the inode table
lazily initialized is just as good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a check for the UNINIT_BLOCKS flag set in the last group. The kernel
patch doesn't handle this gracefully, because it assumes there are a full
set of blocks in each group marked UNINIT_BLOCKS. The kernel should be
fixed up, but in the meantime this avoids hitting the problem, and is
more consistent with lazy_bg not marking the last group UNINIT.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch has all the necesary pieces to open and fix filesystems created
with the uninit block group feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Recent e2fsprogs (1.40.3 and higher) fsck compares primary superblock to
backups, and if things differ, it forces a full check. However, the
kernel has a penchant for updating flags the first time a feature is
used - attributes, large files, etc.
This is a bad idea, and we should break the kernel of this habit,
especially for the ext4 feature flags. But for now, let's make e2fsck
avoid forcing a full check and backup except when absolutely
necessary.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The FLEX_BG feature allows the inode table, block bitmap, and inode
bitmaps to be located anywhere in the filesystem. Update e2fsck and
libext2fs's checking code to recognize this.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
e2fsck/super.c | 14 ++++++++++++--
lib/ext2fs/check_desc.c | 15 +++++++++++++--
2 files changed, 25 insertions(+), 4 deletions(-)
If the primary superblock differs from the backup superblock in
certain key respects, force a full check (if e2fsck was invoked in
preen mode). If the filesystem check passes cleanly, and the
filesystem was opened in read/write mode, then write the primary
superblock to all of the backups.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck adds or deletes any of the feature bitmasks, clear
EXT2_FLAG_MASTER_SB_ONLY so the backup superblocks are updated when
e2fsck finishes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Ubuntu init scripts don't properly set the system time correctly
from hardware clock if the hardware clock is configured to tick local
time instead of GMT time.
Work around this as best as we can by providing an option in
/etc/e2fsck.conf which can be set on Ubuntu systems:
[options]
buggy_init_scripts = 1
Addresses-Debian-Bug: #441093
Addresses-Ubuntu-Bug: #131201
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Linux floppy driver is a bit different from the other block device
drivers, in that if the device has been opened with O_EXCL, it disallows
another open(), even if the second open() does not have the O_EXCL flag.
So this patch moves the call to ext2fs_get_device_size() so that if it
returns EBUSY, e2fsck can close the filesystem, retry the device size,
and then reopen it. This rather complicated approach is required since
we need to know the blocksize of the filesystem before we can call
ext2fs_get_device_size().
Addresses Debian Bug: #410569
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>