This simplifies the code, and using the uninit_bg with the inode table
lazily initialized is just as good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The dumpe2fs syntax documented in the man page has been broken for
some time due to getopt() changes. Change the option syntax in
dumpe2fs to be one which is more extensible and consistent with the
format for extended options in mke2fs and tune2fs.
Addresses-Sourceforge-Bug: #1830994
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new functions ext2fs_{set,get}_{inode,block}_bitmap_range()
which allow programs like e2fsck, dumpe2fs, etc. to get and set chunks
of the bitmap at a time.
Move the representation details of the 32-bit old-style bitmaps into
gen_bitmap.c.
Change calls in dumpe2fs, mke2s, et. al to use the new abstractions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change all of the e2fsprogs programs to use the newer add_error_table()
and remove_error_table() interfaces instead of the much older
initialize_*_error_table() function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add support for the new flag EXT2_FLAG_SOFTSUPP_FEATURES flag to
ext2fs_open() , which allows application to open filesystes with features
which are currently only partially supported by e2fsprogs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new ext2fs library inline functions in order to calculate
the starting and ending blocks in a block group.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
There were still some %d's lurking when we print blocks & inodes; also
many of the counters in the e2fsck_struct were signed, and probably
need to be unsigned to avoid overflows.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
For loops iterating over all group descriptors, consistently define
first_block and last_block in a way that they are inclusive of the
range, and do not overflow.
Previously on the last block group we did a test of <= first +
dec_blocks; this would actually wrap back to 0 for a total block count
of 2^32-1
Also add handling of last block group which may be smaller.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
This feature is initially intended for testing purposes; it allows an
ext2/ext3 developer to create very large filesystems using sparse files
where most of the block groups are not initialized and so do not require
much disk space. Eventually it could be used as a way of speeding up
mke2fs and e2fsck for large filesystem, but that would be best done by
adding an RO_COMPAT extension to the filesystem to allow the inode table
to be lazily initialized on a per-block basis, instead of being entirely initialized
or entirely unused on a per-blockgroup basis.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the format string(%d, %ld) for a block number and inode number
to %u or %lu.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
the superblock and block group descriptors into two functions:
ext2fs_reserve_super_and_bgd, found in lib/ext2fs/alloc_sb.c, and
ext2fs_super_and_bgd_lock, found in lib/ext2fs/close.c.
Change e2fsck/pass1.c (mark_table_blocks), lib/ext2fs/closefs.c
(ext2fs_flush), lib/ext2fs/initialize.c (ext2fs_initialize),
and misc/dumpe2fs.c (list_desc) to use these functions.
e2fsck/ChangeLog
pass1.c (mark_table_blocks): Use the new function
ext2fs_reserve_super_and_bgd to calculate the blocks to be
reserved.
lib/ext2fs/ChangeLog
closefs.c (ext2fs_super_and_bgd_loc): New function which
centralizes the calculation of the superblock and block
group descriptors.
(ext2fs_flush): Use ext2fs_super_and_bgd_lock to figure
out where to write the superblock and block group
descriptors.
alloc_sb.c (ext2fs_reserve_super_and_bgd): New function which
reserves space in the block bitmap using
ext2fs_super_and_bgd_loc.
initialize.c (ext2fs_initialize): Use
ext2fs_reserve_super_and_bgd to initialize the block bitmap.
misc/ChangeLog
dumpe2fs.c (list_desc): Use ext2fs_super_and_bgd_loc to
determine the locations of the superblock and block group
descriptors.
dumpe2fs.c: Use WORDS_BIGENDIAN to determine whether or not we're
(not) using i386 byte order.
dumpe2fs.c, mke2fs.c: Stop using the compatibility badblocks function,
and use the ext2fs_badblocks_* functions instead.
ChangeLog, inode.c, tst_iscan.c:
inode.c, tst_iscan.c: Stop using the compatibility badblocks function,
and use the ext2fs_badblocks_* functions instead.
ChangeLog, badblocks.c:
badblocks.c: Stop using the compatibility badblocks function, and use
the ext2fs_badblocks_* functions instead.
badblocks.c, chattr.c, dumpe2fs.c, e2image.c, findsuper.c, lsattr.c,
mke2fs.c, mklost+found.c, tune2fs.c, util.c: Change location of
ext2_fs.h to be ext2fs/ext2_fs.h
ChangeLog, Makefile.in, resize2fs.h:
resize2fs.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h
ChangeLog, Makefile.in, debugfs.h:
debugfs.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h
ChangeLog, Makefile.in, e2fsck.h, scantest.c:
e2fsck.h, scantest.c: Change location of ext2_fs.h to be
ext2fs/ext2_fs.h
ChangeLog, Makefile.in, tst_uuid.c, uuid_time.c:
tst_uuid.c, uuid_time.c: Remove unneeded #include of ext2_fs.h
ChangeLog, Makefile.in, e2p.h:
e2p.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h
ChangeLog, Makefile.in, test_icount.c, test_rel.c:
test_icount.c, test_rel.c: Change location of ext2_fs.h to be
ext2fs/ext2_fs.h
dumpe2fs.c (main): Add new flag, -i, which will allow dumpe2fs to dump
out the filesystem statistics from an ext2 image file.
Many files:
e2image.8.in: New manual page
badblocks.8.in, e2label.8.in, mke2fs.8.in mklost+found.8.in,
tune2fs.8.in: Update location of e2fsprogs to be
http://e2fsprogs.sourceforge.net.
mkjournal.c (ext2fs_add_journal_device): Fix bug where the device
number of the filesystem (instead of the journal) was being dropped
into s_journal_dev.
ChangeLog, dumpe2fs.c:
dumpe2fs.c (print_journal_information): Use s_first_data_block to find
the correct block to read the journal superblock.
tune2fs.c: Changed the external journal code so that it simply adds a
filesystem to a journal; the journal must have bene created via
"mke2fs -O journal_dev /dev/XXX".
mke2fs.c: Add support for creating an external journal device by using
the command "mke2fs -O journal_dev /dev/XXX". Also changed the
external journal code so -j device=/dev/XXX it simply adds a
filesystem to that journal; the journal must have been created via
separate step.
dumpe2fs.c (print_journal_information): Add support for dumping
information about an external journal device.
mke2fs.c (zap_sector): Fix error message printed when zap_sector
fails.
dumpe2fs.c (list_desc): Fixed format string bug when printing the
inode table location in non-hex format.
dumpe2fs.c (usage): add fhx options to usage message, add -x option to
print out the per-group block numbers in hex, add line for location of
primary/backup superblock and group descriptors
mke2fs.c: rename max to group_blk_max avoid potential macro conflict
badblocks.c, dumpe2fs.c, e2label.c, mke2fs.c, tune2fs.c, uuidgen.c:
For platforms that don't define optarg.h, manually define optarg and
optind.
ChangeLog, main.c:
main.c: For platforms that don't define optarg.h, manually define
optarg and optind.
ChangeLog, unix.c:
unix.c: For platforms that don't define optarg.h, manually define
optarg and optind.
partinfo.c: Fix minor compilation bugs pointed out by Yann Dirson.
mke2fs.c: Don't turn on sparse superblocks by default on pre-2.2 kernels.
mke2fs.8.in: Add the possible valid block sizes for mke2fs. Document
the -n flag, and the new defaults for the -s flag.
dumpe2fs.c, dumpe2fs.8.in: Add new options -f (force) and -h (header-only).
mke2fs.c (PRS): Fix logic for turning on/off the sparse superblock option.
Many files:
Updated copyright statements to reflect the GPL with permission of the
original authors.
dumpe2fs.c, dumpe2fs.8.in: Added new command-line options which allow
a filesystem expert to specify the superblock and blocksize when
opening a filesystem. This is mainly useful when examining the
remains of a toasted filesystem.
Add a -V option which displays the current version.
ChangeLog, unix.c:
unix.c (e2fsck_update_progress): Remove unused variables.
ChangeLog, inode.c:
inode.c (get_next_blockgroup): Fix bug where if get_next_blockgroup()
is called early because of a missing inode table in a block group, the
current_inode counter wasn't incremented correctly.
ChangeLog, tst_uuid.c:
tst_uuid.c (main): Fixed bogus declaration of the main's argv parameter.
ChangeLog, test_icount.c:
test_icount.c (main): Fix main() declaration so that it returns int,
not void.
Many files:
fsck.c (ignore): Remove unused variable cp.
chattr.c (fatal_error):
tune2fs.c (usage):
lsattr.c (usage):
dumpe2fs.c (usage):
badblocks.c (usage): Remove volatile from declaration.
fsck.c: Change use of strdup to be string_copy, since we don't trust
what glibc is doing with strdup. (Whatever it is, it isn't pretty.)
fsck.c:
chattr.c: Remove #include of getopt.h, since it's not needed.
tune2fs.c (main):
lsattr.c (main):
badblocks.c (main):
dumpe2fs.c (main):
mke2fs.c (PRS): Make the variable which getopt returns into be
an int, so that it won't lose on platforms where char is
unsigned.
ChangeLog, unix.c:
Make the variable which getopt returns into be an int, so that it
won't lose on platforms where char is unsigned.