Fix a number of things that cppcheck complains about. Most of these
are minor resource leaks and forgotten declarations.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit tries to make mkdir command in debugfs support inline data.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Introduce small structures for recording directory tree checksums, and
some API changes to support writing out directory blocks with
checksums.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds the ability for the libext2fs functions to read and
write the inode checksum.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
As Li Zefan <lizf@cn.fujitsu.com> reported, the creation timestamp was
not getting set on the lost+found inode. This patch makes sure all of
the timestamps are appropriately set.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If fs->now is non-zero, use that as the time instead of the system
time when setting various filesystem fields (last modified time, last
write time, etc.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
a new inode we make sure that the extra information in the inode (any extra
fields in a large inode and any ea-in-inode information) is cleared. This
can happen when e2fsck creates a new root inode or a new lost+found directory,
or when the user uses the debugfs write, mknod, or mkdir commands. Otherwise,
the newly create inode could inherit garbage (or old EA information) from
a previously deleted inode.
Add support for a new flag, DIRENT_FLAG_INCLUDE_REMOVED,
which will return deleted directory entries.
ext2fs_dir_iterate2 takes a new callback function which
is identical with the one used by
ext2fs_dblist_dir_iterate(). If the directory entry is
deleted, the callback function will be called with the
entry paraemter set to DIRENT_DELETED_FILE.
Makefile.in, alloc_stats.c (ext2fs_inode_alloc_stats,
ext2fs_block_alloc_stats): New functions which update
block/inode allocation statistics in the bitmaps, block
group descriptors, and superblock.
mkjournal.c (mkjournal_proc), mkdir.c (ext2fs_mkdir),
expanddir.c (expand_dir_proc), bb_inode.c
(clear_bad_block_proc, set_bad_block_proc,
ext2fs_update_bb_inode), alloc.c (ext2fs_alloc_block):
Update to use new block/inode allocation statistics.
since files which get dropped into that directory may have come
from a protected directory, and the system administrator may not
deal with immediately. (Addresses Debian bug #118443)
alloc.c, bb_inode.c, bitmaps.c, bitops.h, block.c, bmap.c, bmove.c,
brel.h, cmp_bitmaps.c, dblist.c, dblist_dir.c, dir_iterate.c,
expanddir.c, ext2fs.h, ext2fsP.h, fileio.c, finddev.c, get_pathname.c,
icount.c, inode.c, irel.h, irel_ma.c, ismounted.c, link.c, lookup.c,
mkdir.c, mkjournal.c, namei.c, newdir.c, read_bb_file.c, test_io.c,
tst_iscan.c, unix_io.c, unlink.c: Change use of ino_t to ext2_ino_t,
to protect applications that attempt to compile
-D_FILE_OFFSET_BITS=64, since this inexplicably changes ino_t(!?). So
we use ext2_ino_t to avoid an unexpected ABI change.
debugfs.8.in: Documented new behaviour.
ls.c (ls_l_file): Fix Y2K bug -- was printing 22-May-100 for recent
files. Switched to 4-digit years.
dump.c, debug_cmds.ct (do_rdump): Add new debugfs command "rdump",
which recursively dumps a directory and its contents.
(fix_perms): New function. Break permission-fixing code out of
dump_file() so it can be called by rdump code as well.
(dump_file): Call fix_perms().
debugfs.c, debug_cmds.ct (do_lcd): Add new debugfs command "lcd",
which changes the cwd on the native filesystem.
debugfs.c (open_filesystem): Extra args for superblock, blocksize, and
catastrophic mode. Changed callers.
(do_open_filesys, main): Accept new -b, -s, -c options for
open_filesystem.
ChangeLog, mkdir.c:
mkdir.c (ext2fs_mkdir): Read the parent directory's inode earlier, so
that if there's an error reading it, we can more cleanly back out of
the operation.
version.h:
Update version file for WIP release.
mkdir.c (ext2fs_mkdir): Pass EXT2_FT_DIR flag to ext2fs_link().
link.c (ext2fs_link): This call now uses the low three bits of the
flags parameter to pass the directory filetype information; it will
set the directory entry FILETYPE information if the filesystem
supports it.
newdir.c (ext2fs_new_dir_block): If the FILETYPE superblock option is
set, then create the '.' and '..' entries with the filetype set to
EXT2_FT_DIR.
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
Added definition of ext2fs_get_mem, ext2fs_free_mem, and
ext2fs_resize_mem in ext2fs.h, and changed all library routines to use
these wrapper functions.
Fix buggy use of the INLINE macros.
ChangeLog, dblist.c, ext2_err.et.in, mkdir.c:
dblist.c, mkdir.c: use EXT2_DIR_EXISTS and EXT2_DB_NOT_FOUND instead
of the system error messages.
ext2_err.et.in: Added new error messages EXT2_DIR_EXISTS and
EXT2_DB_NOT_FOUND
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
block.c (ext2fs_block_iterate2): Use retval which is a errcode_t type.
bitmaps.c (make_bitmap): Use size_t instead of int where appropriate.
bb_inode.c (set_bad_block_proc): Add #pragma argsused for Turbo C.
alloc.c (ext2fs_new_inode): Use ino_t instead of int for the group number.
get_pathname.c: Use ino_t instead of int where appropriate.
ext2fs.h: Make the magic structure element be errcode_t instead of int.
alloc.c alloc_tables.c badblocks.c bb_compat.c bb_inode.c
bitmaps.c block.c bmove.c brel_ma.c check_desc.c closefs.c
cmp_bitmaps.c dblist.c dblist_dir.c dir_iterate.c dirblock.c
dupfs.c expanddir.c freefs.c get_pathname.c icount.c
initialize.c inline.c inode.c irel_ma.c link.c llseek.c
lookup.c mkdir.c namei.c newdir.c read_bb.c read_bb_file.c
rs_bitmap.c rw_bitmaps.c swapfs.c test_io.c tst_badblocks.c
tst_iscan.c unix_io.c unlink.c valid_blk.c version.c: Add an
#ifdef for HAVE_UNISTD_H
Darrick J. Wong