the superblock and block group descriptors into two functions:
ext2fs_reserve_super_and_bgd, found in lib/ext2fs/alloc_sb.c, and
ext2fs_super_and_bgd_lock, found in lib/ext2fs/close.c.
Change e2fsck/pass1.c (mark_table_blocks), lib/ext2fs/closefs.c
(ext2fs_flush), lib/ext2fs/initialize.c (ext2fs_initialize),
and misc/dumpe2fs.c (list_desc) to use these functions.
e2fsck/ChangeLog
pass1.c (mark_table_blocks): Use the new function
ext2fs_reserve_super_and_bgd to calculate the blocks to be
reserved.
lib/ext2fs/ChangeLog
closefs.c (ext2fs_super_and_bgd_loc): New function which
centralizes the calculation of the superblock and block
group descriptors.
(ext2fs_flush): Use ext2fs_super_and_bgd_lock to figure
out where to write the superblock and block group
descriptors.
alloc_sb.c (ext2fs_reserve_super_and_bgd): New function which
reserves space in the block bitmap using
ext2fs_super_and_bgd_loc.
initialize.c (ext2fs_initialize): Use
ext2fs_reserve_super_and_bgd to initialize the block bitmap.
misc/ChangeLog
dumpe2fs.c (list_desc): Use ext2fs_super_and_bgd_loc to
determine the locations of the superblock and block group
descriptors.
large number of inodes, then reduce the number of blocks
per group until we find a workable set of filesystem
parameters.
ext2_err.et.in (EXT2_ET_TOO_MANY_INODES): Add new error code.
the filesystem was created. It is set via mke2fs, and printed
via list_super2() (which is called by dumpe2fs).
Also, list_super2() will now print "n/a" if the last mount time
(s_mtime) is zero.
8192-byte and 16384-byte blocksize filesystems.
Change the default bytes-per-inode ratio of a new filesystem to be at most
one inode per block for large blocksizes.
since files which get dropped into that directory may have come
from a protected directory, and the system administrator may not
deal with immediately. (Addresses Debian bug #118443)
Makefile.in: Add message.c and swapfs.c to the list of source files to
build the make depend.
swapfs.c, unix.c: Only support the -s and -S options to e2fsck if
ENABLE_SWAPFS is defined.
Many files:
ext2fs.h, bitops.h, block.c, bmap.c, closefs.c, dirblock.c, inode.c,
native.c, openfs.c, rw_bitmaps.c, swapfs.c: Only include the
byte-swapping logic if ENABLE_SWAPFS is turned on or if we're on a
big-endian machine.
initialize.c (ext2fs_initialize):Use WORDS_BIGENDIAN directly to set
EXT2_FLAG_SWAP_BYTES, instead of using ext2fs_native_flag.
native.c (ext2fs_native_flag): Use WORDS_BIGENDIAN provided by
autoconf to determine whether or not return EXT2_FLAG_SWAP_BYTES.
initialize.c (ext2fs_initialize): Add support for initializing the
ext2 superblock for external journal devices. This basically means we
don't bother to allocate any block group descriptors.
openfs.c (ext2fs_open): Only open external journal devices if the new
flag EXT2_FLAG_JOURNAL_DEV_OK is passed to ext2fs_open. When opening
such devices, don't try to read the block group descriptors, since
they're not there.
ext2_err.et.in (EXT2_NO_JOURNAL_SB): Add new error code
mkjournal.c: Export a new function,
ext2fs_create_journal_superblock(), which allocates and returns a
buffer containing a journal superblock. This is needed by mke2fs to
create an external journal. Rewrote ext2fs_add_journal_device() so
that it no longer creates the external journal, but rather adds a
filesystem to an existing external journal. It handles all of the
UUID manipulation.
ext2fs.h: List the EXT3_FEATURE_JOURNAL_DEV as a flag supported by the
library. Define the EXT2_FLAG_JOURNAL_DEV_OK. Changed function
prototype for ext2fs_add_journal_device().
ext2fs.h: Remove definition of ext2fs_sb. Note: this may break source
(but not binary) compatibility of some users of the ext2 library.
They should just simply do a global search and replace of struct
ext2fs_sb with struct ext2_super_block, and use their own private copy
of ext2_fs.h if they aren't already.
closefs.c, initialize.c, link.c, newdir.c, openfs.c, swapfs.c: Replace
use of ext2fs_sb with ext2_super_block.
ChangeLog, main.c:
main.c (main): Replace use of struct ext2fs_sb with struct ext2_super_block.
ext2_fs.h (i_reserved2): Use __GNU__ instead of __hurd__ to detect the
Hurd OS. To protect against future irrationality on the part of the
FSF concerning whether Linux is GNU or not, on a system which defines
both __linux__ and __GNU___, __linux__ takes precedence.
ChangeLog, initialize.c:
initialize.c (CREATOR_OS): Use __GNU__ instead of __gnu__ to detect
the Hurd OS.
ChangeLog, debugfs.c:
debugfs.c (do_dirty_filesys): Make the "dirty" command clear the valid
bit on the superblock. (And with a -clean option to set the valid
bit.) Originally it was used just to set the "needs to be written"
bit in the in-core version of the fs structure.
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
Added definition of ext2fs_get_mem, ext2fs_free_mem, and
ext2fs_resize_mem in ext2fs.h, and changed all library routines to use
these wrapper functions.
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
Makefile.in (ELF_SO_VERSION): Bump version to be 2.4 since we've added
a new field to the io_channel (app_data).
io.h: Add a new element to the io_channel structure, app_data.
initialize.c, openfs.c: Set io->app_data to point at the filesystem handle.
dosio.c: New file to do DOS/BIOS disk accesses.
namei.c (open_namei): Make pathlen be of type size_t.
llseek.c: Always #include stdlib.h since it's need to define
size_t.
io.h: Use errcode_t for magic numbers.
icount.c (get_icount_el), dupfs.c (ext2fs_dup_handle), dblist.c
(dir_block_cmp): Use size_t where appropriate.
read_bb.c (ext2fs_read_bb_inode), cmp_bitmaps.c
(ext2fs_compare_inode_bitmap): Use blk_t, ino_t and size_t
where appropriate.
closefs.c (ext2fs_flush): Use dgrp_t instead of int where
appropriate.
openfs.c (ext2fs_open), check_desc.c (ext2fs_check_desc): Use blk_t
instead of int where appropriate.
rw_bitmaps.c (read_bitmaps), irel_ma.c, inode.c (ext2fs_write_inode),
initialize.c (ext2fs_initialize): brel_ma.c: Fix to make be
16-bit safe.
link.c (ext2fs_link), unlink.c (ext2fs_unlink), lookup.c (lookup_proc),
ismounted.c (ext2fs_check_if_mounted), block.c (xlate_func):
Add #pragma argsused for Turbo C.
block.c (ext2fs_block_iterate2): Use retval which is a errcode_t type.
bitmaps.c (make_bitmap): Use size_t instead of int where appropriate.
bb_inode.c (set_bad_block_proc): Add #pragma argsused for Turbo C.
alloc.c (ext2fs_new_inode): Use ino_t instead of int for the group number.
get_pathname.c: Use ino_t instead of int where appropriate.
ext2fs.h: Make the magic structure element be errcode_t instead of int.
alloc.c alloc_tables.c badblocks.c bb_compat.c bb_inode.c
bitmaps.c block.c bmove.c brel_ma.c check_desc.c closefs.c
cmp_bitmaps.c dblist.c dblist_dir.c dir_iterate.c dirblock.c
dupfs.c expanddir.c freefs.c get_pathname.c icount.c
initialize.c inline.c inode.c irel_ma.c link.c llseek.c
lookup.c mkdir.c namei.c newdir.c read_bb.c read_bb_file.c
rs_bitmap.c rw_bitmaps.c swapfs.c test_io.c tst_badblocks.c
tst_iscan.c unix_io.c unlink.c valid_blk.c version.c: Add an
#ifdef for HAVE_UNISTD_H
Theodore Ts'o