Reserve EXT4_FEATURE_RO_COMPAT_METADATA_CSUM and
EXT2_FEATURE_COMPAT_EXCLUDE_BITMAP. Also reserve fields in the
superblock and the inode for the checksums. In the block group
descriptor, reserve the exclude bitmap field for the snapshot feature,
and checksums for the inode and block allocation bitmaps.
With this commit, the metadata checksum and exclude bitmap features
should have reserved all of the fields they need in ext4's on-disk
format.
This commit also fixes an a missing byte swap for s_overhead_blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Amir Goldstein <amir73il@gmail.com>
The blocks command prints out the blocks used by a particular inode,
in a format which is useful for test suite automation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The write_journal_inode() code is only setting the low 32-bit i_size
for the journal size, even though it is possible to specify a journal
up to 10M blocks in size. Trying to create a journal larger than 2GB
will succeed, but an immediate e2fsck would fail. Store i_size_high
for the journal inode when creating it, and load it upon access.
Use s_jnl_blocks[15] to store the journal i_size_high backup. This
field is currently unused, as EXT2_N_BLOCKS is 15, so it is using
s_jnl_blocks[0..14], and i_size is in s_jnl_blocks[16].
Rename the "size" argument "num_blocks" for the journal creation functions
to clarify this parameter is in units of filesystem blocks and not bytes.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This was an "uninitialized variable" warning, but it turns out to be
a real bug. Without this change, it is not possible to use "icheck"
to find blocks that are used for the i_file_acl (xattr) block.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The debugfs commands dirsearch, dx_hash, and htree_dump were
never documented in the man page. Do so.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The long_opt / -l argument was apparently never implemented,
so remove it and associated argument parsing.
This slightly changes the (undocumented) behavior because it
no longer defaults to cwd if no filespec is specified...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a few typos in manpages.
Reported-by: Branislav Náter <bnater@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It turns out that it's very hard to calculate overheads in the face of
clustered allocation (bigalloc). This is because multiple metadata
blocks from different block groups can end up in the same allocation
cluster. Calculating the exact overhead requires O(all block bitmaps)
in memory, or O(number of block groups**2) in time. So we will
calculate this at mkfs time and stash it in the superblock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds the superblock fields needed so that dumpe2fs works and the
code points and renames the superblock fields from describing
fragments to clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for detecting the new 'quota' feature in ext4.
The patch reserves code points for usr and group quota inodes and also
for the feature flag EXT4_FEATURE_RO_COMPAT_QUOTA.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use "[u]" instead of "[uninit]" and limit the amount of detail printed
for the extent tree blocks, so it is more similar to the format used
for direct/indirect mapped inodes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We also support for byte-swapping the Next3 fields, although the
current Next3 implementation doesn't support big-endian systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The offset in the bitmap was not getting correctly calculated when the
user specifics a block to track using "logdump -b <block-num>"
Addresses-Debian-Bug: #564084
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit forces the use of the system-provided blkid or uuid header
files if we are using the system-provided blkid or uuid libraries.
This avoids using the in-tree header files with the system libraries.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the cmd_file is not stdin, we should close the file handle via fclose().
Thanks David Binderman to point this out.
Addresses-Novell-Bugzilla: #524526
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Extend the stat command to display more detailed extent information if
the file uses extent mapping instead of displaying the block map using
the block_iterate funtion.
Add the command dump_extents which displays even more detailed
information about an inode's extent tree.
This commit is an extension of a patch from Curt Wohlgemuth.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some people don't want to see the concise "kernel-style" make output.
This configure option allows build engines that want to see the full
set of commands executed by the makefile to get what they want. Most
people will find this more distracting than useful, unless they need
to debug the Makefiles.
(It is not necessary to rerun configure to enable this verbose make
output temprarily; if a developer wants to do a quick debug of a
directory's makefile, he or she can simply edit the definition of the
$(E) and $(Q) variables in the Makefile; instructions can be found in
the MCONFIG file which is included in at the beginning of every
Makefile.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs makefiles were using the same Makefile variable
LIBCOM_ERR for the link-line arguments as well as the dependencies.
Since LIBCOM_ERR can now include non-file arguments such as
"-lpthread", we need to use a separate DEPLIBCOM_ERR variable that
only has build file dependencies.
Do the same thing for STATIC_LIBCOM_ERR and PROFILED_LIBCOM_ERR.
Addresses-Sourceforge-Patches: #2813809
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
do_logdump may jump to errout if fopen(out_file) fails,
but in that case out_file is NULL, and fclose will segfault.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously e2fsprogs interpreted 0 for a rec_len of 65536 (which could
occur if the directory block is completely empty in 64k blocksize
filesystems), while the kernel interpreted 65535 to mean 65536. The
kernel will accept both to mean 65536, and encodes 65535 to be 65536.
This commit changes e2fsprogs to match.
We add the encoding agreed upon for 128k and 256k filesystems, but we
don't enable support for these larger block sizes, since they haven't
been fully tested.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs programs have historically just said that they operate
on ext2 and ext3 file system in their man pages. Update them to say
that they also operate on ext4 file systems.
Addresses-Launchpad-bug: #381854
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add an -a option to the close_filesys command which writes any changes
to the superblock or block group descriptors to all of the backup
superblock locations.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is a regression from commit
8fdf29117f, which attempts to access
current_fs via a feature check before we check that it's open.
Just moving the feature check below the open check should fix it.
Reported-by: Andrew Hecox <ahecox@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This field tracks the lifetime amount of writes to the filesystem. It
will be updated by the kernel as well as by e2fsprogs programs which
write to the filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Gcc is too stupid to realize that:
const char *usage="String which has no percent signs";
com_err(progname, 0, usage);
is OK. I refuse to bow to stupidity with:
com_err(progname, 0, "%s", usage);
but I will use the string directly for the sake of people who like to
build with -Werror=format-security.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ncheck command in debugfs had a bug where some inodes would not
have their pathnames printed if other inodes had more than one hard
link. Fix this bug and simplify the code by printing all of the
pathnames for the requested inodes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Thanks to A. Costa for pointing these out.
Addresses-Debian-Bug: #498100
Addresses-Debian-Bug: #498101
Addresses-Debian-Bug: #498102
Addresses-Debian-Bug: #498103
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also the progname printed as "ncheck" instead of "do_ncheck" to be
consistent with the other error messages in debugfs.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The rec_len field in the directory entry is 16 bits, so if the
filesystem is completely empty, rec_len of 0 is used to designate
65536, for the case where the directory entry takes the entire 64k
block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Print out the currently supported features of e2fsprogs/libext2fs
via a new "debugfs supported_features" command. This helps scripts
to know whether it is possible to try and enable specific features
in the filesystem.
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Trivial fix to print the progname instead of argv[0] in error message.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Close the filehandle and return in case if we are unable to expand the
directory during write.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On Solaris setbuf() will discard any pending output to the stream, so
make we call fflush() before calling setbuf().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Solaris's header files are very picky about which C compiler can be
used for SUSv3 conformance. Use of C99 is not compatible with SUSv2
(_XOPEN_SOURCE=500), and C89 is not compatible with SUSv3
(_XOPEN_SOURCE=600). Since we need some SUSv3 functions, consistently
use SUSv3 so that e2fsprogs will build on Solaris using c99.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
$(LIBSS) should automatically include @DLOPEN_LIB@ so the right thing
happens for programs that need to use the ss library.
Reorder the library link order for tst_extents since the blkid library
uses libuuid functions.
Thanks to Eric Sandeen for pointing this problem out!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to set tm_isdst to -1 so that mktime will automatically
determine whether or not daylight savings time (DST) is in effect.
Previously tm_isdst was set to 0, which caused mktime to interpret the
time as if it was always not using DST.
Addresses-Debian-Bug: #471882
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we are redirecting the output of debugfs to a file or to another
process via a pipe, there's no point sending the output to a pager.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make debugfs and tune2fs reference each other in the "SEE ALSO"
section.
Addresses-Sourceforge-Patches: #1399325
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Taking a cue from getfattr... if a string is "mostly"
printable characters, go ahead & print as a string,
and escape what's left over.
so we get:
Extended attributes stored in inode body:
selinux = "system_u:object_r:root_t:s0\000" (28)
instead of:
Extended attributes stored in inode body:
selinux = "73 79 73 74 65 6d 5f 75 3a 6f 62 6a 65 63 74 5f 72 3a 72 6f 6f 74 5f 74 3a 73 30 00 " (28)
(selinux includes the trailing null in "len" so it
never prints as a string today)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pass BLOCK_FLAG_READ_ONLY to ext2fs_block_iterate2() so that debugfs,
e2image, and tune2fs will work well with filesystems containing
extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This change allows debugfs to be reused as the base for e2fsprogs
internal test programs, by linking debugfs object files with
additional object file(s) that define additional commands. The test
program's object file(s) should define their own comand table, and
define the symbol extra_cmds to be a pointer to the ss_request_table.
In addition, the symbol debug_prog_name can be used to override the
name of the program printed in the version banner and in the ss
prompt.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix strtoblk() to allow a block number 0, and
common_block_args_process() so it prints an error message if a block
number that can't be parsed by strtoul().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Originally submitted by Jason Pyeron:
While working with a compromized system (suckit root kit) hidden files
were viewable by debugfs but not any other utility. When spaces and
tabs were put into the directory names defugfs did not "show" them.
"ls -p" quotes the output so is can be parsed easily.
Addresses-Red-Hat-Bugzilla: #149480
Addresses-Sourceforge-Feature-Request: #1201667
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>