The quota code required that we included dict.o in libsupport.a, so we
might as well just move dict.c and dict.h to lib/support, and then
have e2fsck use the version of dict.c in libsupport.a. This
simplifies the build system and eliminates having two identical copies
of dict.o floating around in the build tree.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check_plausibility() function is now used all over the place, so
we should move the plausible.c file to lib/support and remove the
special case handling for that file that had been in the build system.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The profile functions started as something specific to e2fsck. It's
now used by mke2fs and e2fsck, so it's better to move it into
libsupport.a.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We will be using libsupport.a for e2fsprogs's internal support
functions. It will contain the quota support functions, but we will
also be moving code such as profile.c and plausible.c to libsupport.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There were some generated files that weren't getting removed by the
clean and distclean targets; fix this.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Teach e2fsck to (re)construct extent trees. This enables us to do
either of the following: compress a highly sparse extent tree into
fewer ETB blocks; or convert a ext3-style block mapped file to an
extent file. The reconstruction is performed during pass 1E or 3A,
as detailed below.
For files that are already extent based, this algorithm will
automatically run (pending user approval) if pass1 determines either
(1) that a whole level of extent tree will fit into a higher level of
the tree; (2) that the size of any level can be reduced by at least
one ETB block; or (3) the extent tree is unnecessarily deep. It will
not run at all if errors are found and the user declines to fix the
errors.
The option "-E bmap2extent" can be used to force e2fsck to convert all
block map files to extent trees, and to rebuild all extent files'
extent trees. After conversion, files larger than 12 blocks should be
defragmented to eliminate empty holes where a block lives.
The extent tree constructor is pretty dumb -- it creates a list of
leaf extents (adjacent extents are collapsed), marks all indirect
blocks / ETB blocks free, installs a new extent tree root in the
inode, then loads the leaf extents into the tree.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds to e2fsck the ability to pre-fetch metadata into the
page cache in the hopes of speeding up fsck runs. There are two new
functions -- the first allows a caller to readahead a list of blocks,
and the second is a helper function that uses that first mechanism to
load group data (bitmaps, inode tables).
These new e2fsck routines require the addition of a dblist API to
allow us to iterate a subset of a dblist. This will enable
incremental directory block readahead in e2fsck pass 2.
There's also a function to estimate the readahead given a FS.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we're using check_plausibility() to try to identify something that
obviously isn't an ext* filesystem and libblkid doesn't know what it
is, try libmagic instead.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If any of these utilities detect a bad superblock magic, call
check_plausibility to see if blkid can identify the passed-in argument
as something else (xfs, partition, etc.) in the hopes of catching a
user error.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create a journal.c with routines adapted from e2fsck/journal.c to
handle opening and closing the journal, and setting up the
descriptors, and all that. Unlike e2fsck's versions which try to
identify and fix problems, the routines here have no way to repair
anything.
[ Modified by tytso to fold debugfs/jfs_user.h into e2fsck/jfs_user.h,
so we don't have to copy recovery.c and revoke.c into debugfs. --tytso ]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Per http://www.gnu.org/software/checker/ the gcc "-checker" option
is long deprecated. Nuke it from e2fsprogs.
Most people would never hit this, but people who love to turn knobs,
such as the reporter of kernel.org bz#74171, might run into it and be
sad.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are interfaces that are used by mke2fs.c and tune2fs.c which are
in quotaio.h, and some future changes will be much simpler if we can
combine the two header files together. Also the guard #ifdef for
mkquota.h was incorrect, which caused problems when both header files
needed to be included.
Also remove quota.pc and installation rules for libquota, since this
library is never going to be something that we can export externally
anyway. Eventually we'll want to clean up the interfaces and move the
external publishable interfaces to the libext2fs library, and then
rename what's left from libquota.a to libsupport.a for internal use
only.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Aditya Kali <adityakali@google.com>
Fix some minor bugs relating to passing CFLAGS to cppcheck, and
package the cppcheck output into nicer looking reports.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To check the coverage of e2fsprogs's regression test, do the
following:
configure --enable-gcov
make -j8 ; make -j8 check ; make coverage.txt
The coverage information will be the coverage.txt and *.gcov files in
the build directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Newer versions of autoconf pull in AC_PROG_GCC as part of
AC_CANONICAL_HOST. So we need check for WITH_DIET_LIBC earlier in
configure.in.
Also, e2fsprogs now needs functions which are found in diet libc's
compat library. So add support for autoconf's LIBS function, and
automatically set libs to include -lcompat.
Finally, disable compiling e4defrag by deault if --with-diet-libc is
specified because the program has too many glibc dependencies.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Run sparse against source files when building e2fsprogs with 'make C=1'. If
instead C=2, it configures basic ext2 types for bitwise checking with sparse,
which can help find the (many many) spots where conversion errors are
(possibly) happening.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a test to see if the backtrace() function requires linking in a
library in /usr/lib.
Addresses-Debian-Bug: #708307
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also fix a bug caused by a stray continuation backslash which caused
the e2fsck/Makefile to fail when profiling is enabled.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Remove crc32_be in favor of the implementation in libext2fs.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The Build Log Hardening Check is a debian tool which scans the output
of a package build making sure that the security hardening flags are
used when compiling and linking all of binaries in a package.
For the most part we were passing CFLAGS, CPPFLAGS, and LDFLAGS down
to the compiler and link commands, but there there were one or two
exceptions. In addition, there where a few places in "make install"
where the V=1 option was not being honored, which triggered blhc
warnings since it couldn't analyze those commands.
The e2fsck.static was the only binary that was not getting built and
packaged with the hardening flags, but I've fixed all of the blhc
warnings so in the future it will be obvious if we regress.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Quite some definitions in quota library are not necessary. Remove them.
Also fold quota.h file into quotaio.h since it didn't contain that many
definitions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the ability to log messages about a file system to a specified
directory, using a file name templace that can be specified in
/etc/e2fsck.conf. This allows us to suppress the output of overly
verbose e2fsck outputs while still allowing the full logging output to
go to an appropriate file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These options allow e2fsprogs to be built using symlinks instead of
hard links, and to be installed using symlinks instead of hard links,
respectively.
Addresses-Sourceforge-Bug: #1436294
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixes build problem on systems where gettext() isn't in libc,
such as FreeBSD.
Signed-off-by: Matthias Andree <matthias.andree@gmx.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This commit forces the use of the system-provided blkid or uuid header
files if we are using the system-provided blkid or uuid libraries.
This avoids using the in-tree header files with the system libraries.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some people don't want to see the concise "kernel-style" make output.
This configure option allows build engines that want to see the full
set of commands executed by the makefile to get what they want. Most
people will find this more distracting than useful, unless they need
to debug the Makefiles.
(It is not necessary to rerun configure to enable this verbose make
output temprarily; if a developer wants to do a quick debug of a
directory's makefile, he or she can simply edit the definition of the
$(E) and $(Q) variables in the Makefile; instructions can be found in
the MCONFIG file which is included in at the beginning of every
Makefile.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs makefiles were using the same Makefile variable
LIBCOM_ERR for the link-line arguments as well as the dependencies.
Since LIBCOM_ERR can now include non-file arguments such as
"-lpthread", we need to use a separate DEPLIBCOM_ERR variable that
only has build file dependencies.
Do the same thing for STATIC_LIBCOM_ERR and PROFILED_LIBCOM_ERR.
Addresses-Sourceforge-Patches: #2813809
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We've hit a number of cases where the error codes in problem.h have
been assigned duplicate values compared to problems in our own e2fsck
patches, and this can lead to confusing and difficult to find bugs
in e2fsck (e.g. wrong problem messages, incorrect repair action, etc).
Attached is a test case for the problem.c file to ensure that the
problem table is sorted and does not contain any duplicate values.
Having the problem table sorted allows the correctness checking to be
very simple, and if it ever became important for performance we could
use binary searching of the problem table for the specific problem code.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It's been a while since I've done a build using "configure
--enable-profile", and some bitrot had set into the Makefiles...
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some recent changes had caused diet libc support to bitrot. Fix up
missing header files and other portability fixups needed for dietlibc.
(Many of these changes also improve general portability.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pass in -rpath-link option to the linker so that blkid will build
correctly on systems that don't have libcom_err.so.2 installed.
Fix debugfs to only try to link with -ldl when building without shared
libraries; with ELF shared libraries, the library which requires -ldl
(libss.so) can required the library dependency itself.
Fix how we build tune2fs.static so that we use @LDFLAG_STATIC@, via
$(LDFLAGS_STATIC), instead of hard-coding the use of -static.
Addresses-Sourceforge-Bug: #2088537
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Makefile should use BUILD_CFLAGS instead of ALL_CFLAGS since it
will be built for the host, not the target.
Addresses-Sourceforge-Bug: #2019287
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is needed so that "make check" works in the e2fsck library even
if the shared libraries are not yet installed, and so that we run
those programs against the version of the libraries built in the build
tree.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o