e2fsck.h:
pass1.c (mark_table_blocks, e2fsck_pass1): Remove
ctx->block_illegal_map, since it's not needed by pass1, and pass1b has
been modified to calculate it manually if needed. This reduces the
memory footprint needed by e2fsck.
pass1b.c (check_if_fs_block): New static function which returns
whether or not a block overlaps with filesystem metadata. This
replaces consulting the block_illegal_map bitmap.
util.c:
Make resource tracking message more concise.
bitops.h (ext2fs_mark_generic_bitmap, ext2fs_unmark_generic_bitmap,
ext2fs_mark_block_bitmap, ext2fs_unmark_block_bitmap,
ext2fs_mark_inode_bitmap, ext2fs_unmark_inode_bitmap): Change to
return the previous state of the bit that is being marked or unmarked.
For speed optimization.
ChangeLog, pass3.c:
pass3.c (check_directory): Only do the loop detection algorithm if
we've searched over 2048 parent directories and haven't found the end
yet. This means that in the common case, we don't allocate or clear
the inode_loop_detection bitmap, which for large systems, merely
clearing the bitmap for each directory was turning out to be quite
expensive. Thanks to Jani Jaakkola (jjaakkol@cs.helsinki.fi) for
identifying this problem.
ChangeLog, Makefile.in, e2fsck.h, unix.c:
Makefile.in: Call sync after finishing building all in this directory.
unix.c (PRS): sync the filesystem before trying to use BLKFLSBUF, to
minimize the chance of causing dirty blocks to get dropped.
e2fsck.h: Manually define BLKFLSBUF if not defined, and we're on a
Linux/i386 system.
debugfs.c (dump_inode): Remove #ifdef for i_version vs. i_generation
since we know it will always be i_generation now.
ChangeLog, e2fsck.h, flushb.c, scantest.c:
e2fsck.h, flushb.c, scantest.c: Remove uneeded include of linux/fs.h
bmap.c:
Fix silly spelling typo.
ChangeLog, getsize.c, ismounted.c, swapfs.c:
getsize.c, ismounted.c: Remove unneeded include of linux/fs.h
swapfs.c: Remove #ifdef HAVE_EXT2_INODE_VERSION since it's not needed
any more; we know it will always be i_generation. Add support for
swapping the high bits of the uid and gid.
Makefile.in (distclean): Remove TAGS and Makefile.in.old from the
source directory. Also, when making the .exclude file for the
source_tar_file, exclude those two files as well.
Makefile.in (distclean): Remove TAGS and Makefile.in.old from the
source directory.
problem.c (fix_problem): Support a new flag, PR_PREEN_NO which means
the answer is assumed to be no in preen mode. This is now used in the
PR_1_SET_IMMUTABLE code, so that in preen mode we ignore these inodes
and just print a warning message.
pass1.c (e2fsck_pass1): If the filesystem does not support imagic
inodes, if an inode has the imagic flag set, offer to clear the imagic
flag. If a valid device/fifo/socket has the immutable flag set, call
the new helper function check_immutable() to offerto clear the
immutable flag.
pass2.c (check_filetype): Use the new ext2_file_type() helper function
instead of calculating the file_type information manually.
pass3.c (e2fsck_reconnect_file): When adding a link to lost+found,
calculate the filetype information so that ext2fs_link() can use the
information if applicable. (get_lost_and_found): Create the
/lost+found directory with the correct filetype information if
applicable.
util.c (ext2_file_type), e2fsck.h: New function which returns the
directory entry file type information given the inode's mode bits.
problem.c, problem.h: Added new problem codes PR_1_SET_IMAGIC and
PR_1_SET_IMMUTABLE.
ChangeLog, mke2fs.8.in:
mke2fs.8.in: Update manual page so that the sparse_option filesystem
option is properly named.
pass4.c (e2fsck_pass4): Clear inode_imagic_map after freeing it, to
prevent it from getting freed twice.
unix.c (main): Close the filesystem before freeing the context, so
that in the event of a free()-related segmentation violation, the
filesystem is properly closed and written out.
e2fsck.c (e2fsck_reset_context): When freeing ctx->inode_reg_map, we
weren't zero'ing ctx->inode_reg_map, which could cause a segfault
later on in the e2fsck run.
problem.h (PR_2_SPLIT_DOT): Fix excess zero in problem code (now
matches the standard convention).
debugfs.h: Add declaration for do_features()
debugfs.c: Add #incldue of e2p.h to fix gcc warnings.
ChangeLog, message.c:
message.c (safe_print): Make safe_print take an char instead of an
unsigned char to fix gcc warnings.
mke2fs.c (PRS): Use __u64 instead of long long for portability
reasons.
Moved #include of sys/stat.h inside #ifdef HAVE_LINUX_MAJOR_H for
portability reasons.
ChangeLog, util.c:
util.c: For NT portability, don't redefine getchar(), since stdio
defines that. Instead we introduce a new abstract macro read_a_char()
which is #defined to the right function as necessary.
problem.c, problem.h (PR_2_NULL_NAME): Add new problem code.
pass2.c (check_dir_block): Require that the length of the directory
entry be at least 12 bytes. Check to see if the filename is
zero-length, and flag that as an error.
pass2.c (check_filetype): If the filetype filesystem feature is not
set, and a directory entry has a dirent feature, offer to clear it
(since 2.0 kernels will do complain will interpret it as a very large
name length field).
badblocks.8.in, chattr.1.in, dumpe2fs.8.in, e2label.8.in,
fsck.8.in, lsattr.1.in, mke2fs.8.in, mklost+found.8.in,
tune2fs.8.in, uuidgen.1.in: Update man page to use a more standard
format (bold option flags and italicized variables), as suggested by
Andreas Dilger (adilger@enel.ucalgary.ca)
ChangeLog, e2fsck.8.in:
e2fsck.8.in: Update man page to use a more standard format (bold
option flags and italicized variables), as suggested by Andreas Dilger
(adilger@enel.ucalgary.ca)
ChangeLog, uuid_generate.3.in:
uuid_generate.8.in: Update man page to use a more standard format
(bold option flags and italicized variables), as suggested by Andreas
Dilger (adilger@enel.ucalgary.ca)
pass4.c (e2fsck_pass4): If an inode is set in the inode_imagic_map
bitmap, don't check to see if it is disconnected from the inode tree
(because it almost certainly will be). Free inode_imagic_map at the
end of pass 4.
pass2.c (check_dir_block, check_filetype): If the FILETYPE feature is
set, check the directory entry's filetype information field, and
fix/set it if necessary. (e2fsck_pass2): Free the inode_reg_map
bitmap at the end of pass 2.
pass1.c (e2fsck_pass1, alloc_imagic_map): Allocate and fill in
information for inode_reg_map and inode_imagic_map, which indicates
which inodes are regular files and AFS inodes, respectively.
Since only the master superblock is written during a restart, force
that superblock to be used after a restart; otherwise changes to the
block group descriptors end up getting ignored.
problem.c, problemP.h: If e2fsck is run -n, make def_yn variable be 0
for "no". Add support for a new flag, PR_NO_NOMSG, which supresses
the problem message if e2fsck is run with the -n option.
problem.c, problem.h (PR_2_SET_FILETYPE, PR_2_BAD_FILETYPE): Add new
problem codes.
message.c (expand_dirent_expression): Add support for %dt which prints
the dirent type information.
e2fsck.c (e2fsck_reset_context): Free new bitmaps (inode_reg_map and
inode_imagic_map).
e2fsck.h (e2fsck_t): Add new inode_reg_map and inode_magic_map to the
context structure.
ChangeLog, nt_io.c:
nt_io.c: New file which supports I/O under Windows NT.
ChangeLog, gen_uuid_nt.c:
gen_uuid_nt.c: New file which creates a UUID under Windows NT.
Many files:
Add support for non-Unix compiles
pass1b.c (clone_file_block): Don't clear the dup_map flag if the block
also shares data with the fs metadata when the count drops to 1, since
the block should still be cloned, as fs metadata isn't included in the
count.
ChangeLog, pass3.c:
pass3.c (adjust_inode_count): Fix bug where we didn't keep the
internal and external inode counts in sync when we decremented an
inode whose link count was already zero. Now we skip incrementing or
decrementing both link counts if we would cause an overflow condition.
(expand_dir, expand_dir_proc): Change where we update the inode block
count and size files so that the block count field is updated
correctly when we create an indirect block.
unix.c: Add support for calculating a progress bar if the -C0 option
is given. The function e2fsck_clear_progbar() clears the progress bar
and must be called before any message is issued. SIGUSR1 will enable
the progress bar, and SIGUSR2 will disable the progress bar. This is
used by fsck to handle parallel filesystem checks. Also, set the
device_name from the filesystem label if it is available.
e2fsck.h: Add new flags E2F_FLAG_PROG_BAR and E2F_FLAG_PROG_SUPRESS.
Add new field in the e2fsck structure which contains the last tenth of
a percent printed for the user.
message.c (print_e2fsck_message): Add call to e2fsck_clear_progbar().
pass1.c (e2fsck_pass1):
pass2.c (e2fsck_pass2):
pass3.c (e2fsck_pass3):
pass4.c (e2fsck_pass4):
pass5.c (e2fsck_pass5): Add call to e2fsck_clear_progbar when printing
the resource tracking information.
pass5.c (check_block_bitmaps, check_inode_bitmaps): If there is an
error in the bitmaps, suppress printing the progress bar using the
suppression flag for the remainder of the check, in order to clean up
the display.
e2fsck.h:
pass1.c (pass1_get_blocks, pass1_read_inode, pass1_write_inode,
pass1_check_directory, e2fsck_use_inode_shortcuts): Make pass1_* be
private static functions, and create new function
e2fsck_use_inode_shortcuts which sets and clears the inode shortcut
functions in the fs structure.
e2fsck.h:
pass2.c (e2fsck_process_bad_inode): Make process_bad_inode() an
exported function.
pass4.c (e2fsck_pass4): Call e2fsck_process_bad_inode to check if a
disconnected inode has any problems before connecting it to
/lost+found. Bug and suggested fix by Pavel Machek <pavel@bug.ucw.cz>
ChangeLog, swapfs.c:
swapfs.c (ext2fs_swap_inode): Add compatibility for Linux 2.3 kernels
that use i_generation instead of i_version. Patch supplied by Jon
Bright <sircus@sircus.demon.co.uk>.
ChangeLog, mke2fs.8.in:
mke2fs.8.in: Fix typo in man page which caused the badblocks command
to not show up in the "SEE ALSO" section.
ChangeLog, expect.1, expect.2, image.gz, name:
f_recnect_bad: New test which checks the case where a disconnect inode
also bad inode fields; we need to make sure e2fsck offers to fix the
inode (or clear the inode, as necessary).
dir_iterate.c (ext2fs_process_dir_block): Check for corrupted
directory entry before calling the callback function. This should
prevent some core dumps of insufficiently paranoid callback functions.
ChangeLog, unix.c:
unix.c (main): Add missing space in the disk write-protected message.
problem.c, problem.h (PR_0_INODE_COUNT_WRONG): Add new problem code.
super.c (check_super_block): Add check to make sure the total number
of inodes is sane, since this can be calculated from the number of
groups times the number of inodes per group. Offer to correct it if
it is incorrect.
util.c (print_resource_track): Use mallinfo if present to get more
accurate malloc statistics.
pass3.c (get_lost_and_found): Check to see if lost+found is a plain
fail; if so, offer to unlink it.
problem.c, problem.h (PR_3_LPF_NOTDIR): Add new problem code.
problem.c: Fix problem message for PR_1_BAD_GROUP_DESCRIPTORS so that
the block group number is printed. Add new prompt, PROMPT_UNLINK.
message.c (safe_print): New function which prints strings, converting
non-printable characters using the '^' and M-notation. This function
is now used to print directory name entries and pathnames.
ChangeLog:
Update for release of E2fsprogs 1.14.
unix.c (main): Reset the context before calling ext2fs_close(), to
avoid referencing already freed memory.
ChangeLog, llseek.c:
llseek.c (ext2fs_llseek): Change ext2fs_llseek() in the non-Linux case
to use EINVAL by default, unless it isn't defined, in which case we
use EXT2_ET_INVALID_ARGUMENT instead.
ChangeLog, mk_cmds.sh.in:
mk_cmds.sh.in: Fixed portability bug in shell script; we were
depending on a bash'ism.
ChangeLog, uuid.c:
uuid.c: Use asm/types.h instead of linux/types.h, to be consistent
with other locations where we've had to do this to work around glibc.
pass3.c (get_lost_and_found): If the filesystem is not opened
read-only, then force /lost+found to be created if it is not present.
problem.c: Allow PR_3_NO_LF_DIR to be handled during a preen operation.
ChangeLog, Makefile.in:
Makefile.in: Updated dependencies.
ChangeLog, fsck.c:
fsck.c (load_fs_info): Parse /etc/fstab ourselves, instead of relying
on getmntent(). This has the advantage of allowing us to properly
handle missing pass numbers correctly.
ChangeLog, configure.in:
configure.in: Add paths.h to header files for which we search.
tune2fs.8.in: Fix minor display bug in the nroff.
mke2fs.c (show_stats, write_inode_tables): Use the log10 function to
calculate the display of block numbers so that things look nice on an
80 character display.
mke2fs.c (usage): Add the sparse-super-flag to the usage message.
ChangeLog, e2fsck.c, pass1.c, pass2.c, problem.c, problem.h, unix.c:
unix.c (main): Move ext2fs_close() after e2fsck_free_context() since
e2fsck_free_context may reference data in ctx->fs.
e2fsck.c (e2fsck_reset_context): Make sure ctx->fs is non-NULL before
checking ctx->fs->dblist.
pass1.c (e2fsck_pass1): Use the device check subroutine on FIFO's and
Socket's, so that we catch bogus immutable inodes.
pass2.c (process_bad_inode): Process bad socket and fifo's.
problem.h, problem.c: Define new problem codes PR_2_BAD_FIFO and
PR_2_BAD_SOCKET.
problem.c: Add PR_3_NO_DIRINFO error code.
super.c (check_super_value): Rename min and max to min_val and max_val
to avoid possible cpp macro conflicts.
pass4.c (e2fsck_pass4): Rename max to maxgroup, to avoid possible cpp
macro conflicts.
pass3.c (e2fsck_pass3): Rename max to maxdirs, to avoid possible cpp
macro conflicts.
(check_directory): Fix logic to avoid possible core dump in the
case of ext2fs_get_dir_info returning NULL. (By the time we get here,
it should never happen, but...). Also simply/streamline the control
flow of the function.
unix.c (check_if_skip): Move the "not cleanly mounted" check ahead of
the maximal mount and too long since checked tests.
(reserve_stdio_fds): Make sure 0,1,2 file descriptors are open, so
that we don't open the filesystem using the same file
descriptor as stdout or stderr.
pass2.c (e2fsck_pass2): Fix the progress accounting so that we get to
100%.
pass3.c (e2fsck_pass3): Change progress accounting to be consistent
with the other e2fsck passes.
e2fsck.c (e2fsck_run): At the end of each pass, call the progress
function with the pass number set to zero.
unix.c (e2fsck_update_progress): If the pass number is zero, ignore
the call, since that indicates that we just want to deallocate any
progress structures.
emptydir.c:
Commit partially done file.
ChangeLog, badblocks.c:
badblocks.c (ext2fs_badblocks_list_add): Use a bigger increment than
10 blocks when we need to expand the size of the badblocks list.
badblocks.c (test_disk): Don't clear the existing bad blocks list when
using e2fsck -c, since it may cause blocks with marginal errors to be
dropped from the bad blocks list.
Add a -V option which displays the current version.
ChangeLog, unix.c:
unix.c (e2fsck_update_progress): Remove unused variables.
ChangeLog, inode.c:
inode.c (get_next_blockgroup): Fix bug where if get_next_blockgroup()
is called early because of a missing inode table in a block group, the
current_inode counter wasn't incremented correctly.
ChangeLog, tst_uuid.c:
tst_uuid.c (main): Fixed bogus declaration of the main's argv parameter.
ChangeLog, test_icount.c:
test_icount.c (main): Fix main() declaration so that it returns int,
not void.
Many files:
fsck.c (ignore): Remove unused variable cp.
chattr.c (fatal_error):
tune2fs.c (usage):
lsattr.c (usage):
dumpe2fs.c (usage):
badblocks.c (usage): Remove volatile from declaration.
fsck.c: Change use of strdup to be string_copy, since we don't trust
what glibc is doing with strdup. (Whatever it is, it isn't pretty.)
pass1.c, problem.h: Change blkcnt_t to be e2_blkcnt_t to avoid
collision with LFS API.
pass1.c (e2fsck_pass1): Fix bug so that ext2_max_sizes is properly
initialized.
(e2fsck_pass1): Don't allow the the boot loader inode to be a
directory (clear the inode mode field if so).