The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the callback interator modifies a block in the middle of an extent
during a call to the block iterator, causing the extent to be split,
ext2_block_iterate3() will end up calling the callback function twice
for some number of blocks. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When ext2fs_block_iterate2() is called on an extent-mapped file with a
depth > 1, it will erroneously calling the callback function starting
all over again with an offset of logical block 0. It shouldn't do
this, and it cases mke2fs to become very slow when creating files with
very large journals.
Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The patch below adds a function, ext2fs_extent_open2(), that behaves
as ext2fs_extent_open(), but will use the user-supplied inode
structure when opening an extent instead of reading the inode from
disk. It also changes several of the calls to extent_open() to use
this enhancement.
Signed-off-by: Nic Case <number9652@yahoo.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When modifying a block via the block_iterate interface, preserve the
uninit flag in the extent. Resize2fs uses this interface, so we have
to preserve the uninit status when relocating a block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the callback function tries to change a block, and
ext2fs_extent_set_bmap() fails for some reason (for example, there
isn't enough disk space to split a node and expand the extent tree,
make sure that error is reflected back up to the caller.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is needed so that extent-based inodes (including a journal inode)
can be created via block_iterate.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Resize2fs needs to be able to relocate the interior nodes of an extent
tree. Add support for this feature via ext2fs_extent_replace().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit enables read/write access via the block iterator for
extent-based inodes.
Also fixed some bugs regarding the handling on non-leaf extent nodes
when iterating over extents in a file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This flag allows the caller to promise that it will not try to modify
the block numbers returned by the iterator.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This addresses a potential security vulnerability where an untrusted
filesystem can be corrupted in such a way that a program using
libext2fs will allocate a buffer which is far too small. This can
lead to either a crash or potentially a heap-based buffer overflow
crash. No known exploits exist, but main concern is where an
untrusted user who possesses privileged access in a guest Xen
environment could corrupt a filesystem which is then accessed by the
pygrub program, running as root in the dom0 host environment, thus
allowing the untrusted user to gain privileged access in the host OS.
Thanks to the McAfee AVERT Research group for reporting this issue.
Addresses CVE-2007-5497.
Signed-off-by: Rafal Wojtczuk <rafal_wojtczuk@mcafee.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Makefile.in: Add message.c and swapfs.c to the list of source files to
build the make depend.
swapfs.c, unix.c: Only support the -s and -S options to e2fsck if
ENABLE_SWAPFS is defined.
Many files:
ext2fs.h, bitops.h, block.c, bmap.c, closefs.c, dirblock.c, inode.c,
native.c, openfs.c, rw_bitmaps.c, swapfs.c: Only include the
byte-swapping logic if ENABLE_SWAPFS is turned on or if we're on a
big-endian machine.
initialize.c (ext2fs_initialize):Use WORDS_BIGENDIAN directly to set
EXT2_FLAG_SWAP_BYTES, instead of using ext2fs_native_flag.
native.c (ext2fs_native_flag): Use WORDS_BIGENDIAN provided by
autoconf to determine whether or not return EXT2_FLAG_SWAP_BYTES.
ext2fs.h (EXT2_FLAG_IMAGE_FILE): Add new flag, and add image_header
field in the ext2_filsys structure
block.c (block_iterate_ind, block_iterate_dind, block_iterate_tind):
inode.c (ext2fs_read_inode):
rw_bitmaps.c (read_bitmaps):
openfs.c (ext2fs_open): Add support for EXT2_FLAG_IMAGE_FILE
imager.c (ext2fs_image_bitmap_read): Fix bug in imager to make sure
the full bitmap is saved.
alloc.c, bb_inode.c, bitmaps.c, bitops.h, block.c, bmap.c, bmove.c,
brel.h, cmp_bitmaps.c, dblist.c, dblist_dir.c, dir_iterate.c,
expanddir.c, ext2fs.h, ext2fsP.h, fileio.c, finddev.c, get_pathname.c,
icount.c, inode.c, irel.h, irel_ma.c, ismounted.c, link.c, lookup.c,
mkdir.c, mkjournal.c, namei.c, newdir.c, read_bb_file.c, test_io.c,
tst_iscan.c, unix_io.c, unlink.c: Change use of ino_t to ext2_ino_t,
to protect applications that attempt to compile
-D_FILE_OFFSET_BITS=64, since this inexplicably changes ino_t(!?). So
we use ext2_ino_t to avoid an unexpected ABI change.
rw_bitmaps.c: Fixed signed/unsigned warnings.
fileio.c (ext2fs_file_set_size): Remove unneeded extern from the
function declaration.
dblist.c (make_dblist): Add safety check in case the dblist pointer
passed in is null (in which case, assign it to fs->dblist). Fixed
some signed/unsigned warnings.
bmap.c: Make addr_per_block be of type blk_t to avoid signed/unsigned
warnings.
namei.c (ext2fs_follow_link): Remove uneeded extern from the function
declaration.
get_pathname.c (get_pathname_proc): Use return value from
ext2fs_get_mem, instead of checking if &gp->name is NULL.
dir_iterate.c (ext2fs_process_dir_block):
dblist_dir.c (ext2fs_dblist_dir_iterate): Remove uneeded extern from
the function declaration.
block.c (ext2fs_block_iterate2): If the read_inode call fails, return
the error directly instead of jumping to the cleanup routine, since we
don't need to do any cleanup.
alloc_table.c (ext2fs_allocate_group_table): Make this function take a
dgrp_t for its group argument.
ext2fs.h: Make dgrp_t an __u32 type, and make fs->desc_group_count be
of type dgrp_t.
alloc_tables.c (ext2fs_allocate_group_table): Fix bug so that if the
stride length hits a bad value, we retry the block allocation starting
at the beginning of the block group.
ext2fs.h, bb_inode.c, block.c, bmove.c, dir_iterate.c, expanddir.c,
ext2fsP.h, read_bb.c: Change blkcnt_t to be e2_blkcnt_t to avoid
collision with LFS API.
block.c (ext2fs_block_iterate3): Make the ref_offset field contain the
offset into the inode.i_blocks array when ref_block is zero. Since we
haven't done a formal release of e2fsprogs since block_iterate2 was
first introduced, I removed block_iterate2, and renamed block_iterate3
to be block_iterate2.
bb_inode.c, bmove.c, dblist_dir.c, dir_iterate.c, expanddir.c,
ext2fs.h, ext2fsP.h, read_bb.c: Change use of block_iterate and
block_iterate2 to block_iterate2 with the new prototype for the
interator function. (using blkcnt_t forr blockcount)
ChangeLog, debugfs.c, ls.c, lsdel.c:
debugfs.c, ls.c, lsdel.c: Add support for large files. (The high 32
bits share space with the i_dir_acl field.)
ext2fs.h: Add new superblock fields (s_algorithm_usage_bitmap,
s_prealloc_blocks, s_prealloc_dir_blocks). Added conditional defines
of new features COMPAT_DIR_PREALLOC, RO_COMPAT_LARGE_FILE
RO_COMPAT_BTREE_DIR, INCOMPAT_COMPRESSION, INCOMPAT_DIRNAME_SIZE.
Changed the library to declare that we support COMPAT_DIR_PREALLOC,
INCOMPAT_DIRNAME_SIZE, RO_COMPAT_LARGE_FILE.
fileio.c: Rename function ext2fs_file_llseek to be ext2fs_file_lseek,
which is more accurate.
block.c: Add new function ext2fs_block_iterate3 which calls the
iterator function with the blockcount argument of type blkcnt_t. This
version of the function is allowed to handle large files; the other
fucntions are not.
ext2fs.h: Add new type blkcnt_t
ext2_err.et.in: Add error code EXT2_ET_FILE_TOO_BIG
block.c (ext2fs_block_iterate2): Fix bug where the block count field
wasn't getting correctly incremented for sparse files when the
indirect or doubly-indirect block specified in the inode was zero.
unlink.c (unlink_proc):
lookup.c (lookup_proc):
link.c (link_proc):
get_pathname.c (get_pathname_proc):
dir_iterate.c (ext2fs_process_dir_block): Mask off high 8 bits from
dirent->name_len, so it can be used for other purposes.
ext2fs.h: Add definition of EXT2_FEATURE_INCOMPAT_DIRNAME_SIZE, and
indicate that we have support for this incompatible option.
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
Added definition of ext2fs_get_mem, ext2fs_free_mem, and
ext2fs_resize_mem in ext2fs.h, and changed all library routines to use
these wrapper functions.
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
dosio.c: New file to do DOS/BIOS disk accesses.
namei.c (open_namei): Make pathlen be of type size_t.
llseek.c: Always #include stdlib.h since it's need to define
size_t.
io.h: Use errcode_t for magic numbers.
icount.c (get_icount_el), dupfs.c (ext2fs_dup_handle), dblist.c
(dir_block_cmp): Use size_t where appropriate.
read_bb.c (ext2fs_read_bb_inode), cmp_bitmaps.c
(ext2fs_compare_inode_bitmap): Use blk_t, ino_t and size_t
where appropriate.
closefs.c (ext2fs_flush): Use dgrp_t instead of int where
appropriate.
openfs.c (ext2fs_open), check_desc.c (ext2fs_check_desc): Use blk_t
instead of int where appropriate.
rw_bitmaps.c (read_bitmaps), irel_ma.c, inode.c (ext2fs_write_inode),
initialize.c (ext2fs_initialize): brel_ma.c: Fix to make be
16-bit safe.
link.c (ext2fs_link), unlink.c (ext2fs_unlink), lookup.c (lookup_proc),
ismounted.c (ext2fs_check_if_mounted), block.c (xlate_func):
Add #pragma argsused for Turbo C.
block.c (ext2fs_block_iterate2): Use retval which is a errcode_t type.
bitmaps.c (make_bitmap): Use size_t instead of int where appropriate.
bb_inode.c (set_bad_block_proc): Add #pragma argsused for Turbo C.
alloc.c (ext2fs_new_inode): Use ino_t instead of int for the group number.
get_pathname.c: Use ino_t instead of int where appropriate.
ext2fs.h: Make the magic structure element be errcode_t instead of int.
alloc.c alloc_tables.c badblocks.c bb_compat.c bb_inode.c
bitmaps.c block.c bmove.c brel_ma.c check_desc.c closefs.c
cmp_bitmaps.c dblist.c dblist_dir.c dir_iterate.c dirblock.c
dupfs.c expanddir.c freefs.c get_pathname.c icount.c
initialize.c inline.c inode.c irel_ma.c link.c llseek.c
lookup.c mkdir.c namei.c newdir.c read_bb.c read_bb_file.c
rs_bitmap.c rw_bitmaps.c swapfs.c test_io.c tst_badblocks.c
tst_iscan.c unix_io.c unlink.c valid_blk.c version.c: Add an
#ifdef for HAVE_UNISTD_H
Theodore Ts'o