ext2_types.h.in: If linux/types.h has been defined, then don't try to
redefine the typedefs.
ChangeLog, Makefile.in:
Makefile.in: Make the install target depend on $(SUBS) to accomodate
the fools who want to compile and install e2fsprogs as root using just
one command.
setsuper.c: Add s_lastcheck field to the fields which can be modified
using set_super_value. (Suggested by Andreas Dilger)
ChangeLog, Makefile.in:
Makefile.in (HFILES): Add ext2_types.h to the list of files which
should be installed.
Makefile.in: Limit some .o files from being included into the library
if --disable-debugfs, --disable-swapfs, --disable-imager, or
--disable-resizer are used.
dumpe2fs.c: Use WORDS_BIGENDIAN to determine whether or not we're
(not) using i386 byte order.
dumpe2fs.c, mke2fs.c: Stop using the compatibility badblocks function,
and use the ext2fs_badblocks_* functions instead.
ChangeLog, inode.c, tst_iscan.c:
inode.c, tst_iscan.c: Stop using the compatibility badblocks function,
and use the ext2fs_badblocks_* functions instead.
ChangeLog, badblocks.c:
badblocks.c: Stop using the compatibility badblocks function, and use
the ext2fs_badblocks_* functions instead.
Makefile.in, gen_bitmap.c, bitops.h: Move inline functions
ext2fs_mark_generic_bitmap and ext2fs_unmark_generic_bitmap to
gen_bitmap.c as normal functions. (This saves space and doesn't
significantly change the speed of e2fsck on a P-III.)
ChangeLog:
Add missing log entry for unix.c.
Makefile.in: Add message.c and swapfs.c to the list of source files to
build the make depend.
swapfs.c, unix.c: Only support the -s and -S options to e2fsck if
ENABLE_SWAPFS is defined.
Many files:
ext2fs.h, bitops.h, block.c, bmap.c, closefs.c, dirblock.c, inode.c,
native.c, openfs.c, rw_bitmaps.c, swapfs.c: Only include the
byte-swapping logic if ENABLE_SWAPFS is turned on or if we're on a
big-endian machine.
initialize.c (ext2fs_initialize):Use WORDS_BIGENDIAN directly to set
EXT2_FLAG_SWAP_BYTES, instead of using ext2fs_native_flag.
native.c (ext2fs_native_flag): Use WORDS_BIGENDIAN provided by
autoconf to determine whether or not return EXT2_FLAG_SWAP_BYTES.
Makefile.in: Remove the dependence on the libe2p library.
mkjournal.c (ext2fs_add_journal_inode): Replace use of fsetflags with
direct usage of the ioctl/fchflags so that we don't have to depend on
the libe2p library.
icount.c (insert_icount_el): Fix the code used to estimate the size of
the new icount array to be more intelligent, to avoid reallocating the
array too many times.
ChangeLog, ext2_types.h.in:
ext2_types.h.in: Use unsigned ints in favor of unsigned longs when
trying to find a 32-bit wide type.
Makefile.in: Move include/asm/types.h.in to lib/ext2fs/ext2_fs.h.in.
wordwrap.pl: Add some rules which help fix up the dependencies.
Many files:
Move include/asm/types.h.in to lib/ext2fs/ext2_fs.h.in.
ismounted.c: More cleanups for ismounted.c, some from Andreas, some to
clean up Andreas's patches. Use strncpy instead of strcpy to save the
root's mountpoint. Clean up #ifdef structure. Remove uneeded
variable in testing/debug driver.
ismounted.c: Add check for root device which doesn't depend on
/etc/fstab or /proc/mounts to be correct. Don't call endmntent()
before we are done with mnt struct.
ext2_fs.h: Change assignment of EXT2_FEATURE_COMPAT_DIR_INDEX to make
room for pre-existing usage of EXT2_FEATURE_COMPAT_EXT_ATTR. Add flag
EXT2_INDEX_FL with the same codepoint as EXT2_BTREE_FL.
ext2fs.h: #include <> instead of "" for ext2fs and et header files,
since they will be installed in /usr/include
ChangeLog, e2p.h:
e2p.h: #include <> instead of "" for ext2fs and et header files, since
they will be installed in /usr/include
fileio.c (ext2fs_file_read): Factored out common code and cleaned up
function. Fixed a bug where if there was an error reading from the
disk, the number of bytes read wasn't reliably set. (Fixes Debian bug
#79163)
(ext2fs_file_write): Factored out common code and made function more
efficient; if writing a full block, don't bother to do a
read-modify-write cycle.
dirblock.c (ext2fs_read_dir_block): Check for an directory record
length which isn't a multiple four, and treat that as an invalid.
Scan the directory and return an error (EXT2_ET_DIR_CORRUPTED) if the
directory records are orrupted.
(ext2fs_write_dir_block): If while byte-swapping the directory block,
if there's an error, abort and return EXT2_ET_DIR_CORRUPTED.
ext2fs.h (EXT2_FLAG_IMAGE_FILE): Add new flag, and add image_header
field in the ext2_filsys structure
block.c (block_iterate_ind, block_iterate_dind, block_iterate_tind):
inode.c (ext2fs_read_inode):
rw_bitmaps.c (read_bitmaps):
openfs.c (ext2fs_open): Add support for EXT2_FLAG_IMAGE_FILE
imager.c (ext2fs_image_bitmap_read): Fix bug in imager to make sure
the full bitmap is saved.
dir_iterate.c (ext2fs_process_dir_block): Add a double-check to make
sure the rec_len is a multiple of 4, to prevent bus-errors on
architectures which care about mis-aligned pointer references.
ismounted.c (check_mntent): Check /proc/mounts on Linux systems before
checking /etc/mtab. The EXT2_MF_READONLY flag is now set from the
/etc/mtab options field for all filesystems, not just the root
filesystem. Add debugging code to make it easier to test
ext2fs_check_if_mounted().
mkjournal.c (ext2fs_create_journal_superblock): Add safety check;
return an error if there's an attempt to create a journal less than
1024 filesystem blocks.
ext2_err.et.in, mkjournal.c: Change EXT2_JOURNAL_NOT_BLOCK and
EXT2_NO_JOURNAL_SB to be EXT2_ET_*.
bitops.h (ext2fs_swab16, ext2fs_swab32): Add i386 assembly inline
functions.
tst_byteswap.c: New function to test the byteswap functions. Add to
regression test suite.
mkjournal.c (ext2fs_create_journal_superblock): Fix the setting of
s_first for external devices to always be 1, since jsb->s_first is
always relative to the start of the journal superblock. Use htonl(1)
when setting s_nr_users.
mkjournal.c (ext2fs_add_journal_device): Fix bug where the device
number of the filesystem (instead of the journal) was being dropped
into s_journal_dev.
ChangeLog, dumpe2fs.c:
dumpe2fs.c (print_journal_information): Use s_first_data_block to find
the correct block to read the journal superblock.
initialize.c (ext2fs_initialize): Add support for initializing the
ext2 superblock for external journal devices. This basically means we
don't bother to allocate any block group descriptors.
openfs.c (ext2fs_open): Only open external journal devices if the new
flag EXT2_FLAG_JOURNAL_DEV_OK is passed to ext2fs_open. When opening
such devices, don't try to read the block group descriptors, since
they're not there.
ext2_err.et.in (EXT2_NO_JOURNAL_SB): Add new error code
mkjournal.c: Export a new function,
ext2fs_create_journal_superblock(), which allocates and returns a
buffer containing a journal superblock. This is needed by mke2fs to
create an external journal. Rewrote ext2fs_add_journal_device() so
that it no longer creates the external journal, but rather adds a
filesystem to an existing external journal. It handles all of the
UUID manipulation.
ext2fs.h: List the EXT3_FEATURE_JOURNAL_DEV as a flag supported by the
library. Define the EXT2_FLAG_JOURNAL_DEV_OK. Changed function
prototype for ext2fs_add_journal_device().
MCONFIG.in: Change --enable-gcc-wall handling so that it's no longer a
configure option, but something which is done when the developer uses
the command "make gcc-wall".
configure.in: Remove test for ino_t, since we don't use it any more
(we always use our own ext2_ino_t). Remove --enable-gcc-wall support.
Add test for sys/ioctl.h
.del-types.h.in~ca55114a:
Remove definition of ino_t
ChangeLog, Makefile.in, ext2fs.h, flushb.c, jump.funcs:
flushb.c (ext2fs_sync_device): New function which centralizes all of
the places which might try to use the BLKFLSBUF or FDFLUSH ioctls (and
usually failing to define them since the system header files don't
usually do this for us, and we're trying to avoid usage of kernel
include files now.)
alloc.c, bb_inode.c, bitmaps.c, bitops.h, block.c, bmap.c, bmove.c,
brel.h, cmp_bitmaps.c, dblist.c, dblist_dir.c, dir_iterate.c,
expanddir.c, ext2fs.h, ext2fsP.h, fileio.c, finddev.c, get_pathname.c,
icount.c, inode.c, irel.h, irel_ma.c, ismounted.c, link.c, lookup.c,
mkdir.c, mkjournal.c, namei.c, newdir.c, read_bb_file.c, test_io.c,
tst_iscan.c, unix_io.c, unlink.c: Change use of ino_t to ext2_ino_t,
to protect applications that attempt to compile
-D_FILE_OFFSET_BITS=64, since this inexplicably changes ino_t(!?). So
we use ext2_ino_t to avoid an unexpected ABI change.
dirblock.c (ext2fs_read_dir_block): Fix a potential case where we may
overrun allocated memory in case of a corrupted filesystem (or an
e2fsck test case :-) when byte-swapping the directory block.
mkjournal.c (ext2fs_add_journal_device): Fix various gcc -Wall
complaints including a missing return 0 at the end of
ext2fs_add_journal_device.
ChangeLog, ext2fs.h:
ext2fs.h: Indent the #warning to fix gcc -Wall complaint.
Makefile.in: Link in libe2p when creating libext2fs as a shared
library, since mkjournal.c now references fsetflags().
mkjournal.c (ext2fs_add_journal_inode): Folded in Andreas Dilger's
changes (with fixups) to allow on-line creation of a journal file.
.del-types.h.in~ca55114a:
Change what we use to protect the header file to be _ASM_TYPES_H
instead of _LINUX_TYPES_H. (Needed to make libc5 builds happy).
version.h:
Update for WIP release.
ismounted.c: add ext2fs_check_mount_point() function, which will
optionally return the mount point of a device if mounted
ChangeLog, closefs.c, ext2fs.h:
ext2fs.h, closefs.c (ext2fs_flush): Add new flag,
EXT2_FLAG_SUPER_ONLY, which the close routines to only update the
superblock, and not the group descriptors.
ext2fs.h: Remove definition of ext2fs_sb. Note: this may break source
(but not binary) compatibility of some users of the ext2 library.
They should just simply do a global search and replace of struct
ext2fs_sb with struct ext2_super_block, and use their own private copy
of ext2_fs.h if they aren't already.
closefs.c, initialize.c, link.c, newdir.c, openfs.c, swapfs.c: Replace
use of ext2fs_sb with ext2_super_block.
ChangeLog, main.c:
main.c (main): Replace use of struct ext2fs_sb with struct ext2_super_block.
ext2fs.h: Cleaned up header file by removing definitions of feature
flags that might not have been defined in older ext2 header files.
Now that we're using our own include/linux/ext2fs.h header file, this
can never happen.
jfs_dat.h: Removed old header file which is no longer needed.
ChangeLog:
jfs_compat.h: Remove uneeded header file.
ext2fs.h, mkjournal.c (ext2fs_add_journal_fs,
ext2fs_add_journal_device): Add a new argument to the APIs of these
function, which is a flags word. This is used to allow the creation
of a V1 superblock for those folks who are using ext3 0.3b in
production. Note, the user-land interface for getting at this flag
won't be documented, as the V1 superblock is deprecated.
jfs_e2fsck.h, jfs_user.h: Replaces jfs_compat.h. The jfs.h file has
been moved to the include/linux directory.
journal.c, revoke.c, recovery.c: Updated files from Stephen to support
the V2 superblock and revoke processing. The journal.c and revoke.c
files are copies from the ext3 kernel source.
Makefile.in: Added revoke.c to the list of source/object files.
Makefile.in:
Fix up some mistakes in the source file list, and regenerate the
dependencies.
Update Makefile dependencies.
ChangeLog, jfs.h:
jfs.h: Remove excess #include of JFS_DEBUG. Not needed for e2fsprogs,
since we optioanlly define it in the configuration file system.
mkjournal.c (init_journal_superblock): Sync Stephen's changes which
creates a V2 superblock instead of a V1 superblock.
ChangeLog, jfs.h, jfs_compat.h, list.h:
jfs.h, jfs_compat.h, list.h: New files added to support ext3.
imager.c (ext2fs_image_{inode,super,bitmap}_{read,write}, ext2_fs.h,
Makefile.in: New file that has routines that save ext2fs metadata to a
file.
ext2_err.et.in (EXT2_ET_MAGIC_E2IMAGE): New error code assigned.
e2image.h: New file which defines the file format for the ext2 image
file. (Saved copy of ext2 metadata to a file as a saving throw
against worst-case damage.)
ChangeLog, Makefile.in, e2image.c:
e2image.c, Makefile.in: New program which saves ext2 metadata to a
file for people who need a last-ditch saving throw.
inode.c (ext2fs_flush_icache): Add new function ext2fs_flush_icache()
which flushes the internal inode cache. Applications which modify the
inode table blocks directly must call this function.
ext2_io.h (io_channel_write_byte): Add new interface to allow callers
to write specific byte ranges. This is an optional interface, which
not all IO channels may implement.
unix_io.c (unix_write_byte): test_io.c (test_write_byte): Add
implementation of the write_byte function.
closefs.c (write_primary_superblock, ext2fs_flush): Add a new function
which writes the primary superblock. If the IO channel supports
writing raw bytes directly, only fields which were modified are
written to the disk. This makes it safe(r) to use utilities like
tune2fs on a mounted filesystem.
freefs.c (ext2fs_free): Free the original superblock if it is available.
openfs.c (ext2fs_open): Store a copy of the original superblock when
opening it.
ext2fs.h: Add a field to store the original superblock in the ext2
context structure.
llseek.c: Add #ifdef's for IA64 (it's a 64-bit platform, so we don't
need to use llseek).
ChangeLog, fsck.c:
fsck.c (device_already_active): Add a special case check for MD
devices, so we don't try to check them in parallel with other devices.
finddev.c, ext2fs.h, Makefile.in: Add new file, finddev.c, which
provides the function ext2fs_find_block_device(). This function
returns the pathname to a block device, given its device number.
Commit this file for future use; contains a configure.in script for when
libuuid gets separtead out into its own package.
libext2fs.texinfo:
Update version numbers for 1.19 release.
TODO:
Commit TODO list for 1.19 release.
README:
Update file for 1.19 release.
ChangeLog, e2fsprogs.spec:
e2fsprogs.spec: Merge in a few changes from the Red Hat 6.2 spec file,
now that we're using a modern rpm to build e2fsprogs. Also updated
version number to 1.19.
version.h:
Update version number for 1.19 release.
ChangeLog:
Check in changes for 1.19 release.
ext2fs.h (EXT2_LIB_FEATURE_INCOMPAT_SUPP): Add
EXT3_FEATURE_INCOMPAT_RECOVER (aka needs_recovery) to the list of
filesystem flags supported by the library.
ChangeLog, e2fsprogs.spec:
e2fsprogs.spec (%post): Remove resize2fs from its old location in
/usr/sbin in the postinstall script.
RELEASE-NOTES, version.h:
Update for WIP release.
ext2fs.h: Update to include latest journalling additions to the superblock.
.del-ext2_fs.h~7a460879, ChangeLog:
ext2_fs.h: Update to include latest journalling additions to the
superblock.
tst_badblocks.c: Update test program to test ext2fs_read_bb_FILE2 and
ext2fs_write_FILE.
write_bb_file.c (ext2fs_write_bb_FILE): New function which writes out
bad blocks list to a file.
read_bb_file.c (ext2fs_read_bb_FILE2): Add new function which changes
the callback function to take two additional arguments; a private
blind pointer supplied by the caller, and pointer to a char *
containing a pointer to the invalid string.
badblocks.c (ext2fs_badblocks_equal): Add new function which returns
true if two badblocks list are equal.
Makefile.in: Remove explicit link of -lc in the shared library. (It
shouldn't be necessary, and is harmful in some cases).
jump.funcs:
dll/jump.funcs: Add new jumptable entries for ext2fs_write_bb_FILE,
ext2fs_read_bb_FILE2, and ext2fs_badblocks_equal.
debugfs.8.in: Documented new behaviour.
ls.c (ls_l_file): Fix Y2K bug -- was printing 22-May-100 for recent
files. Switched to 4-digit years.
dump.c, debug_cmds.ct (do_rdump): Add new debugfs command "rdump",
which recursively dumps a directory and its contents.
(fix_perms): New function. Break permission-fixing code out of
dump_file() so it can be called by rdump code as well.
(dump_file): Call fix_perms().
debugfs.c, debug_cmds.ct (do_lcd): Add new debugfs command "lcd",
which changes the cwd on the native filesystem.
debugfs.c (open_filesystem): Extra args for superblock, blocksize, and
catastrophic mode. Changed callers.
(do_open_filesys, main): Accept new -b, -s, -c options for
open_filesystem.
ChangeLog, mkdir.c:
mkdir.c (ext2fs_mkdir): Read the parent directory's inode earlier, so
that if there's an error reading it, we can more cleanly back out of
the operation.
version.h:
Update version file for WIP release.
getsize.c: Under linux, manually define the ioctl for BLKGETSIZE if it
isn't already defined and it's safe to do so.
.cvsignore:
Ignore build files when builddir==srcdir
getsize.c (ext2fs_get_device_size): Use open64() instead of open() if
it exists.
unix_io.c (unix_open): Use open64() instead of open() if it exists.
llseek.c: Simplify header includes of unistd.h. If lseek64 is
available (and prototypes are defined) use it in preference to llseek.
gen_uuid.c (get_random_bytes): Make more paranoid about misbehaving
/dev/urandom. If we get a return of zero without an error more than 8
times in a row, we break out and return an error. Also, if
/dev/urandom doesn't exist, try /dev/random.
ChangeLog, ext2fs.h:
ext2fs.h: Use AUTOCONF SIZEOF_* macros if available to determine how
to define __s64 and __u64. Turn off "compression is experimental"
warning if the cpp macro I_KNOW_THAT_COMPRESSION_IS_EXPERIMENTAL is
defined.
ext2fs.h: Define EXT2FS_COMPRESSED_BLKADDR and HOLE_BLKADDR.
Conditionally include Compression as a supported type if
ENABLE_COMPRESSION (via --enable-compression) is turned on.
bitops.h (ext2fs_mark_generic_bitmap, ext2fs_unmark_generic_bitmap,
ext2fs_mark_block_bitmap, ext2fs_unmark_block_bitmap,
ext2fs_mark_inode_bitmap, ext2fs_unmark_inode_bitmap): Change to
return the previous state of the bit that is being marked or unmarked.
For speed optimization.
ChangeLog, pass3.c:
pass3.c (check_directory): Only do the loop detection algorithm if
we've searched over 2048 parent directories and haven't found the end
yet. This means that in the common case, we don't allocate or clear
the inode_loop_detection bitmap, which for large systems, merely
clearing the bitmap for each directory was turning out to be quite
expensive. Thanks to Jani Jaakkola (jjaakkol@cs.helsinki.fi) for
identifying this problem.
ChangeLog, Makefile.in, e2fsck.h, unix.c:
Makefile.in: Call sync after finishing building all in this directory.
unix.c (PRS): sync the filesystem before trying to use BLKFLSBUF, to
minimize the chance of causing dirty blocks to get dropped.
e2fsck.h: Manually define BLKFLSBUF if not defined, and we're on a
Linux/i386 system.
debugfs.c (dump_inode): Remove #ifdef for i_version vs. i_generation
since we know it will always be i_generation now.
ChangeLog, e2fsck.h, flushb.c, scantest.c:
e2fsck.h, flushb.c, scantest.c: Remove uneeded include of linux/fs.h
bmap.c:
Fix silly spelling typo.
ChangeLog, getsize.c, ismounted.c, swapfs.c:
getsize.c, ismounted.c: Remove unneeded include of linux/fs.h
swapfs.c: Remove #ifdef HAVE_EXT2_INODE_VERSION since it's not needed
any more; we know it will always be i_generation. Add support for
swapping the high bits of the uid and gid.
Makefile.in (distclean): Remove TAGS and Makefile.in.old from the
source directory. Also, when making the .exclude file for the
source_tar_file, exclude those two files as well.
Makefile.in (distclean): Remove TAGS and Makefile.in.old from the
source directory.
Makefile.in (tst_badblocks): Add freefs.o to the object list, since
ext2fs_badblocks_list_free was moved to freefs.c.
tst_badblocks.c: Use the newer badblocks API names. Add duplicate
blocks to the test inputs to test dealing with adding blocks which are
already in the badblocks list.
badblocks.c (ext2fs_badblocks_list_add): If appending to the end of
the list, use a shortcut O(1) operations instead of an O(n) operation.
(Idea suggested by David Beattie.)
freefs.c (ext2fs_free): Use ext2fs_badblocks_list_free() instead of
badblocks_list_free(), to save a procedure call.
nt_io.c (_OpenNtName): Open the device using
FILE_SYNCHRONOUS_IO_NONALERT instead of FILE_SYNCHRONOUS_IO_ALERT
(nt_open): At the end of the device open routine, unlock the drive but
do not dismount it.
ext2_fs.h (i_reserved2): Use __GNU__ instead of __hurd__ to detect the
Hurd OS. To protect against future irrationality on the part of the
FSF concerning whether Linux is GNU or not, on a system which defines
both __linux__ and __GNU___, __linux__ takes precedence.
ChangeLog, initialize.c:
initialize.c (CREATOR_OS): Use __GNU__ instead of __gnu__ to detect
the Hurd OS.
ChangeLog, debugfs.c:
debugfs.c (do_dirty_filesys): Make the "dirty" command clear the valid
bit on the superblock. (And with a -clean option to set the valid
bit.) Originally it was used just to set the "needs to be written"
bit in the in-core version of the fs structure.
mkdir.c (ext2fs_mkdir): Pass EXT2_FT_DIR flag to ext2fs_link().
link.c (ext2fs_link): This call now uses the low three bits of the
flags parameter to pass the directory filetype information; it will
set the directory entry FILETYPE information if the filesystem
supports it.
newdir.c (ext2fs_new_dir_block): If the FILETYPE superblock option is
set, then create the '.' and '..' entries with the filetype set to
EXT2_FT_DIR.
pass4.c (e2fsck_pass4): If an inode is set in the inode_imagic_map
bitmap, don't check to see if it is disconnected from the inode tree
(because it almost certainly will be). Free inode_imagic_map at the
end of pass 4.
pass2.c (check_dir_block, check_filetype): If the FILETYPE feature is
set, check the directory entry's filetype information field, and
fix/set it if necessary. (e2fsck_pass2): Free the inode_reg_map
bitmap at the end of pass 2.
pass1.c (e2fsck_pass1, alloc_imagic_map): Allocate and fill in
information for inode_reg_map and inode_imagic_map, which indicates
which inodes are regular files and AFS inodes, respectively.
Since only the master superblock is written during a restart, force
that superblock to be used after a restart; otherwise changes to the
block group descriptors end up getting ignored.
problem.c, problemP.h: If e2fsck is run -n, make def_yn variable be 0
for "no". Add support for a new flag, PR_NO_NOMSG, which supresses
the problem message if e2fsck is run with the -n option.
problem.c, problem.h (PR_2_SET_FILETYPE, PR_2_BAD_FILETYPE): Add new
problem codes.
message.c (expand_dirent_expression): Add support for %dt which prints
the dirent type information.
e2fsck.c (e2fsck_reset_context): Free new bitmaps (inode_reg_map and
inode_imagic_map).
e2fsck.h (e2fsck_t): Add new inode_reg_map and inode_magic_map to the
context structure.
ChangeLog, nt_io.c:
nt_io.c: New file which supports I/O under Windows NT.
ChangeLog, gen_uuid_nt.c:
gen_uuid_nt.c: New file which creates a UUID under Windows NT.
Many files:
Add support for non-Unix compiles
ext2fs.h: Add new fields for journalling and define new feature bits
used by newer filesystems: IMAGIC_INODES, HAS_JOURNAL, RECOVER.
expanddir.c (ext2fs_expand_dir, expand_dir_proc): Change where we
update the inode block count and size files so that the block count
field is updated correctly when we create an indirect block.
MCONFIG.in (BUILD_CC):
configure.in (BUILD_CC): If cross compiling, find the native C
compiler and set it to BUILD_CC so that we can successfully build
util/subst.
ChangeLog, Makefile.in:
Makefile.in (subst): Build subst using $(BUILD_CC), since it's a
helper program which must be built using the native C compiler during
a cross-compilation.
Makefile.in:
Update dependencies.
e2fsck.h:
pass1.c (pass1_get_blocks, pass1_read_inode, pass1_write_inode,
pass1_check_directory, e2fsck_use_inode_shortcuts): Make pass1_* be
private static functions, and create new function
e2fsck_use_inode_shortcuts which sets and clears the inode shortcut
functions in the fs structure.
e2fsck.h:
pass2.c (e2fsck_process_bad_inode): Make process_bad_inode() an
exported function.
pass4.c (e2fsck_pass4): Call e2fsck_process_bad_inode to check if a
disconnected inode has any problems before connecting it to
/lost+found. Bug and suggested fix by Pavel Machek <pavel@bug.ucw.cz>
ChangeLog, swapfs.c:
swapfs.c (ext2fs_swap_inode): Add compatibility for Linux 2.3 kernels
that use i_generation instead of i_version. Patch supplied by Jon
Bright <sircus@sircus.demon.co.uk>.
ChangeLog, mke2fs.8.in:
mke2fs.8.in: Fix typo in man page which caused the badblocks command
to not show up in the "SEE ALSO" section.
ChangeLog, expect.1, expect.2, image.gz, name:
f_recnect_bad: New test which checks the case where a disconnect inode
also bad inode fields; we need to make sure e2fsck offers to fix the
inode (or clear the inode, as necessary).
dir_iterate.c (ext2fs_process_dir_block): Check for corrupted
directory entry before calling the callback function. This should
prevent some core dumps of insufficiently paranoid callback functions.
ChangeLog, unix.c:
unix.c (main): Add missing space in the disk write-protected message.
fileio.c (ext2fs_file_open): Remove obsolete comment stating that we
don't handle writing yet (we do). Fixed bug where we weren't
allocating a big enough buffer for ext2_bmap.
ChangeLog, ext2fs.h:
ext2fs.h: Add feature definition for AFS IMAGIC inodes.
ChangeLog, MCONFIG.in, config.sub:
MCONFIG.in: Define man1dir, man3dir, and man8dir in terms of mandir.
config.sub: Update config.sub from autoconf 2.13 so that it will
recognize new machine types from the Alpha.
configure:
Update to match latest changes to configure.in
message.c (safe_print): New function which prints strings, converting
non-printable characters using the '^' and M-notation. This function
is now used to print directory name entries and pathnames.
ChangeLog:
Update for release of E2fsprogs 1.14.
inode.c (ext2fs_read_inode, ext2fs_write_inode): Check to see if the
inode number is zero; if it's zero, return EXT2_ET_BAD_INODE_NUM.
ChangeLog, fsck.c:
fsck.c (load_fs_info): If the pass number field is missing, it needs
to be treated as zero.
libext2fs.texinfo, README:
Update for 1.14 release.
unix.c (main): Reset the context before calling ext2fs_close(), to
avoid referencing already freed memory.
ChangeLog, llseek.c:
llseek.c (ext2fs_llseek): Change ext2fs_llseek() in the non-Linux case
to use EINVAL by default, unless it isn't defined, in which case we
use EXT2_ET_INVALID_ARGUMENT instead.
ChangeLog, mk_cmds.sh.in:
mk_cmds.sh.in: Fixed portability bug in shell script; we were
depending on a bash'ism.
ChangeLog, uuid.c:
uuid.c: Use asm/types.h instead of linux/types.h, to be consistent
with other locations where we've had to do this to work around glibc.
pass3.c (get_lost_and_found): If the filesystem is not opened
read-only, then force /lost+found to be created if it is not present.
problem.c: Allow PR_3_NO_LF_DIR to be handled during a preen operation.
ChangeLog, Makefile.in:
Makefile.in: Updated dependencies.
ChangeLog, fsck.c:
fsck.c (load_fs_info): Parse /etc/fstab ourselves, instead of relying
on getmntent(). This has the advantage of allowing us to properly
handle missing pass numbers correctly.
ChangeLog, configure.in:
configure.in: Add paths.h to header files for which we search.
rw_bitmaps.c: Fixed signed/unsigned warnings.
fileio.c (ext2fs_file_set_size): Remove unneeded extern from the
function declaration.
dblist.c (make_dblist): Add safety check in case the dblist pointer
passed in is null (in which case, assign it to fs->dblist). Fixed
some signed/unsigned warnings.
bmap.c: Make addr_per_block be of type blk_t to avoid signed/unsigned
warnings.
namei.c (ext2fs_follow_link): Remove uneeded extern from the function
declaration.
get_pathname.c (get_pathname_proc): Use return value from
ext2fs_get_mem, instead of checking if &gp->name is NULL.
dir_iterate.c (ext2fs_process_dir_block):
dblist_dir.c (ext2fs_dblist_dir_iterate): Remove uneeded extern from
the function declaration.
block.c (ext2fs_block_iterate2): If the read_inode call fails, return
the error directly instead of jumping to the cleanup routine, since we
don't need to do any cleanup.
alloc_table.c (ext2fs_allocate_group_table): Make this function take a
dgrp_t for its group argument.
ext2fs.h: Make dgrp_t an __u32 type, and make fs->desc_group_count be
of type dgrp_t.
pass2.c (e2fsck_pass2): Fix the progress accounting so that we get to
100%.
pass3.c (e2fsck_pass3): Change progress accounting to be consistent
with the other e2fsck passes.
e2fsck.c (e2fsck_run): At the end of each pass, call the progress
function with the pass number set to zero.
unix.c (e2fsck_update_progress): If the pass number is zero, ignore
the call, since that indicates that we just want to deallocate any
progress structures.
emptydir.c:
Commit partially done file.
ChangeLog, badblocks.c:
badblocks.c (ext2fs_badblocks_list_add): Use a bigger increment than
10 blocks when we need to expand the size of the badblocks list.
closefs.c (ext2fs_flush): Update the s_block_group_nr field as
appropriate for all of the block group copies, so that it's clear
where the beginning of the filesystem is on the disk. (For when the
partition table gets scrod.)
ext2fs.h: Change the name of the feature from
EXT2_FEATURE_INCOMPAT_DIRNAME_SIZE to EXT2_FEATURE_INCOMPAT_FILESIZE
(to match with the kernel).
Add a -V option which displays the current version.
ChangeLog, unix.c:
unix.c (e2fsck_update_progress): Remove unused variables.
ChangeLog, inode.c:
inode.c (get_next_blockgroup): Fix bug where if get_next_blockgroup()
is called early because of a missing inode table in a block group, the
current_inode counter wasn't incremented correctly.
ChangeLog, tst_uuid.c:
tst_uuid.c (main): Fixed bogus declaration of the main's argv parameter.
ChangeLog, test_icount.c:
test_icount.c (main): Fix main() declaration so that it returns int,
not void.
Many files:
fsck.c (ignore): Remove unused variable cp.
chattr.c (fatal_error):
tune2fs.c (usage):
lsattr.c (usage):
dumpe2fs.c (usage):
badblocks.c (usage): Remove volatile from declaration.
fsck.c: Change use of strdup to be string_copy, since we don't trust
what glibc is doing with strdup. (Whatever it is, it isn't pretty.)
alloc_tables.c (ext2fs_allocate_group_table): Fix bug so that if the
stride length hits a bad value, we retry the block allocation starting
at the beginning of the block group.
ext2fs.h, bb_inode.c, block.c, bmove.c, dir_iterate.c, expanddir.c,
ext2fsP.h, read_bb.c: Change blkcnt_t to be e2_blkcnt_t to avoid
collision with LFS API.
pass1.c (process_inode_cmp): Use EXT2_QSORT_TYPE to define the
appropriate return type for comparison functions for qsort.
e2fsck.h: Add #ifdef protection for unistd.h
super.c: Remove header files already included by e2fsck.h
ChangeLog, dblist.c, ext2fs.h:
ext2fs.h: Define EXT2_QSORT_TYPE appropriately for the return type for
comparison functions for qsort.
dblist.c (dir_block_cmp): Use EXT2_QSORT_TYPE in function declaration.
ChangeLog, extent.c:
extent.c (ext2fs_create_extent_table): Use ext2fs_free_mem instead of
free().
(extent_cmp): Use EXT2_QSORT_TYPE to define the appropriate return
type for comparison functions for qsort.
ext2fs.h, bitops.h: Add support for the Watcom C compiler to do inline
functions.
ext2fs.h, dosio.c: Use asm/types.h instead of linux/types.h to evade a
potential problem with glibc's header files trying to spike out
linux/types.h.
ext2fs.h (ext2fs_resize_mem): Change the function prototype to include
the old size of the memory, which is needed for some braindamaged
memory allocation systems that don't support realloc().
badblocks.c (ext2fs_badblocks_list_add):
bb_inode.c (clear_bad_block_proc):
dblist.c (ext2fs_add_dir_block):
icount.c (insert_icount_el):
irel_ma.c (ima_put):
rs_bitmap.c (ext2fs_resize_generic_bitmap): Update functions to pass
the old size of the memory to be resized to ext2fs_resize_mem().
ChangeLog, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Update function to pass the old size
of the memory to be resized to ext2fs_resize_mem().
ChangeLog, extent.c, resize2fs.c:
resize2fs.c (adjust_superblock):
extent.c (ext2fs_add_extent_entry): Update functions to pass the old
size of the memory to be resized to ext2fs_resize_mem().
ext2fs.h: If __STRICT_ANSI__ is defined and we're on a platform with
32 bit longs, then we need to manually define __s64 and __u64, since
the current kernel header files don't define these if __STRICT_ANSI__
is defined. This is a problem if we are compiling with full GCC
warnings, since we do need 64 bit support.
Makefile.in (OBJS): Remove bmove.o from files to be built, since we're
not using ext2fs_move_blocks() and there is some question as to its
usefulness in its current form.
bmap.c (block_bmap): Remove unused function.
bmove.c (process_block): Fix -Wall warning.
ChangeLog, debugfs.c, debugfs.h, dump.c:
debugfs.h: Add declaration for do_dirty_filsys() to prevent -Wall
warnings.
debugfs.c (copy_file):
dump.c (dump_file): Fix -Wall warning caused by signed/unsigned mismatch.
block.c (ext2fs_block_iterate3): Make the ref_offset field contain the
offset into the inode.i_blocks array when ref_block is zero. Since we
haven't done a formal release of e2fsprogs since block_iterate2 was
first introduced, I removed block_iterate2, and renamed block_iterate3
to be block_iterate2.
bb_inode.c, bmove.c, dblist_dir.c, dir_iterate.c, expanddir.c,
ext2fs.h, ext2fsP.h, read_bb.c: Change use of block_iterate and
block_iterate2 to block_iterate2 with the new prototype for the
interator function. (using blkcnt_t forr blockcount)
ChangeLog, debugfs.c, ls.c, lsdel.c:
debugfs.c, ls.c, lsdel.c: Add support for large files. (The high 32
bits share space with the i_dir_acl field.)
ext2fs.h: Add new superblock fields (s_algorithm_usage_bitmap,
s_prealloc_blocks, s_prealloc_dir_blocks). Added conditional defines
of new features COMPAT_DIR_PREALLOC, RO_COMPAT_LARGE_FILE
RO_COMPAT_BTREE_DIR, INCOMPAT_COMPRESSION, INCOMPAT_DIRNAME_SIZE.
Changed the library to declare that we support COMPAT_DIR_PREALLOC,
INCOMPAT_DIRNAME_SIZE, RO_COMPAT_LARGE_FILE.
fileio.c: Rename function ext2fs_file_llseek to be ext2fs_file_lseek,
which is more accurate.
block.c: Add new function ext2fs_block_iterate3 which calls the
iterator function with the blockcount argument of type blkcnt_t. This
version of the function is allowed to handle large files; the other
fucntions are not.
ext2fs.h: Add new type blkcnt_t
ext2_err.et.in: Add error code EXT2_ET_FILE_TOO_BIG
block.c (ext2fs_block_iterate2): Fix bug where the block count field
wasn't getting correctly incremented for sparse files when the
indirect or doubly-indirect block specified in the inode was zero.
unlink.c (unlink_proc):
lookup.c (lookup_proc):
link.c (link_proc):
get_pathname.c (get_pathname_proc):
dir_iterate.c (ext2fs_process_dir_block): Mask off high 8 bits from
dirent->name_len, so it can be used for other purposes.
ext2fs.h: Add definition of EXT2_FEATURE_INCOMPAT_DIRNAME_SIZE, and
indicate that we have support for this incompatible option.
Set the immutable flag on the block and character device so that
e2fsck notices them as bad devices, and offers to fix them. E2fsck
currently only checks devices with the immutable flag set, since
otherwise there might be some false positives --- the kernel doesn't
always clear the all of i_blocks[n], n>=4, due to a race condition.
ChangeLog, inode.c:
inode.c (ext2fs_get_next_inode): Always do the check to see if the
inode table is missing so that we catch the case where the first block
group is missing.
ext2_io.h, ext2fs.h: Protect against being included multiple times.
bmove.c: #include ext2fsP.h instead of "ext2fs/ext2fs.h"
test_io.c (test_flush): Add a debugging printf when the flush method
is called.
rw_bitmaps.c (ext2fs_read_bitmaps): If the bitmaps are already read
in, return right away.
bitops.h: Don't try to do i386 inline asm functions if the compiler
isn't GCC.
ext2fs.h: If EXT2_FLAT_INCLUDES is defined, #include e2_types.h,
instead of linux/types.h, and e2_bitops.h instead of ext2fs/bitops.h.
icount.c, version.c: Don't #include <et/com_err.h>, as it isn't necessary.
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
expanddir.c (ext2fs_expand_dir): Check to make sure the block bitmap
is loaded, and return an error if it is not.
expanddir.c (expand_dir_proc): Only use ext2fs_write_dir_block when
writing a directory block, not when writing out a fresh indirect
block.
pass1.c, pass2.c, pass3.c, pass4.c, pass5.c: Add calls to the progress
indicator function.
pass1.c (scan_callback): Add call to the progress feedback function
(if it exists).
super.c (check_super_block): Skip the device size check if the
get_device_size returns EXT2_EXT_UNIMPLEMENTED.
iscan.c (main): Don't use fatal_error() anymore.
pass1b.c, swapfs.c, badblocks.c: Set E2F_FLAG_ABORT instead of calling
fatal_error(0).
problem.c, pass3.c (PR_3_ROOT_NOT_DIR_ABORT,
PR_3_NO_ROOT_INODE_ABORT): New problem codes.
problem.c, pass2.c (PR_2_SPLIT_DOT): New problem code.
problem.c, pass1.c (PR_1_SUPPRESS_MESSAGES): New problem code.
problemP.h: New file which separates out the private fix_problem data
structures.
util.c, dirinfo.c, pass1.c, pass1b.c, pass2.c, pass5.c, super.c,
swapfs.c util.c: allocate_memory() now takes a e2fsck context as its
first argument, and rename it to be e2fsck_allocate_memory().
problemP.h:
New file which contains the private problem abstraction definitions.
Makefile.pq:
Remove include of MAKEFILE.STD, which doesn't exist at this point.
Makefile.in, tst_getsize.c: Added new file which is used to test the
ext2fs_get_device_size function.
ext2_err.et.in (EXT2_ET_UNIMPLEMENTED): Added new error code.
ext2fs.h: Make ext2fs_get_mem take an unsigned argument.
fileio.c (ext2fs_file_get_size, ext2fs_file_set_size, ext2fs_file_get_fs):
New functions added.
bitops.c (ext2fs_warn_bitmap, ext2fs_warn_bitmap2): Don't call com_err
if OMIT_COM_ERR is defined.
Rename new error codes to _ET_ in them for consistency.
ChangeLog, et_c.awk, et_h.awk:
Remove support for non STDC compilers, since the workarounds caused
problems with the header file.
Makefile.pq:
Checkpoint of powerquest work.
Added definition of ext2fs_get_mem, ext2fs_free_mem, and
ext2fs_resize_mem in ext2fs.h, and changed all library routines to use
these wrapper functions.
Fix buggy use of the INLINE macros.
ChangeLog, dblist.c, ext2_err.et.in, mkdir.c:
dblist.c, mkdir.c: use EXT2_DIR_EXISTS and EXT2_DB_NOT_FOUND instead
of the system error messages.
ext2_err.et.in: Added new error messages EXT2_DIR_EXISTS and
EXT2_DB_NOT_FOUND
Update version.h for interim release
ChangeLog, Makefile.in, test_icount.c:
Makefile.in (PROGS): Remove test_rel from the test programs that we
build for now.
test_icount.c: Fix some random lint warnings.
Makefile.in:
Fix typo in removing brel_ma.o and irel_ma.o from the Makefile
ext2fs.h: Added function declarations and constants for bmap.c and
fileio.c.
ext2_err.et.in: Added new error messages EXT2_FILE_RO and
EXT2_ET_MAGIC_EXT2_FILE
Makefile.in: Added files bmap.c and fileio.c, and temporarily
commented out brel_ma.c and irel_ma.c
bmap.c: New file which maps a file's logical block number to its
physical block number.
fileio.c: New file which implements simple file reading and writing
primitives.
alloc.c (ext2fs_alloc_block): New function which allocates a block,
zeros it, and updates the filesystem accounting records appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these errors instead of EINVAL,
ENOENT, etc.
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
Added check to see if llseek is declared in unistd.h
ChangeLog, llseek.c:
Check HAVE_LLSEEK_PROTOTYPE to see whether or not we need to declare
llseek().
llseek.c (ext2fs_llseek): Fix type error for ext2fs_llseek()
icount.c (ext2fs_icount_validate):
bmove.c (process_block): Fix lint error in type for fprintf().
inode.c (ext2fs_check_directory): Add support for the callback
to return the error code EXT2_ET_CALLBACK_NOTHANDLED.
ChangeLog, mke2fs.c:
Make parse_raid_opts return a void, to fix a -Wall warning.
Makefile.in (ELF_SO_VERSION): Bump version to be 2.4 since we've added
a new field to the io_channel (app_data).
io.h: Add a new element to the io_channel structure, app_data.
initialize.c, openfs.c: Set io->app_data to point at the filesystem handle.
io.h: Change the prototype of ext2fs_llseek() to use int's instead of
unsigned int's.
llseek.c: Change to allow PIC and !HAVE_LLSEEK. Add a prototype to
make life easer for GNU Libc 2.
rw_bitmaps.c: On the PowerPC, the big-endian variant of the ext2
filesystem has its bitmaps stored as 32-bit words with bit 0 as the
LSB of each word. Thus a bitmap with only bit 0 set would be, as a
string of bytes, 00 00 00 01 00 ... To cope with this, we
byte-reverse each word of a bitmap if we have a big-endian filesystem,
that is, if we are *not* byte-swapping other word-sized numbers.
ChangeLog, expect.1, image.gz:
f_badinode: Modify test to check for "bad" character and block devices
(i.e., ones which contain garbage block entries)
dosio.c: New file to do DOS/BIOS disk accesses.
namei.c (open_namei): Make pathlen be of type size_t.
llseek.c: Always #include stdlib.h since it's need to define
size_t.
io.h: Use errcode_t for magic numbers.
icount.c (get_icount_el), dupfs.c (ext2fs_dup_handle), dblist.c
(dir_block_cmp): Use size_t where appropriate.
read_bb.c (ext2fs_read_bb_inode), cmp_bitmaps.c
(ext2fs_compare_inode_bitmap): Use blk_t, ino_t and size_t
where appropriate.
closefs.c (ext2fs_flush): Use dgrp_t instead of int where
appropriate.
openfs.c (ext2fs_open), check_desc.c (ext2fs_check_desc): Use blk_t
instead of int where appropriate.
rw_bitmaps.c (read_bitmaps), irel_ma.c, inode.c (ext2fs_write_inode),
initialize.c (ext2fs_initialize): brel_ma.c: Fix to make be
16-bit safe.
link.c (ext2fs_link), unlink.c (ext2fs_unlink), lookup.c (lookup_proc),
ismounted.c (ext2fs_check_if_mounted), block.c (xlate_func):
Add #pragma argsused for Turbo C.
block.c (ext2fs_block_iterate2): Use retval which is a errcode_t type.
bitmaps.c (make_bitmap): Use size_t instead of int where appropriate.
bb_inode.c (set_bad_block_proc): Add #pragma argsused for Turbo C.
alloc.c (ext2fs_new_inode): Use ino_t instead of int for the group number.
get_pathname.c: Use ino_t instead of int where appropriate.
ext2fs.h: Make the magic structure element be errcode_t instead of int.
alloc.c alloc_tables.c badblocks.c bb_compat.c bb_inode.c
bitmaps.c block.c bmove.c brel_ma.c check_desc.c closefs.c
cmp_bitmaps.c dblist.c dblist_dir.c dir_iterate.c dirblock.c
dupfs.c expanddir.c freefs.c get_pathname.c icount.c
initialize.c inline.c inode.c irel_ma.c link.c llseek.c
lookup.c mkdir.c namei.c newdir.c read_bb.c read_bb_file.c
rs_bitmap.c rw_bitmaps.c swapfs.c test_io.c tst_badblocks.c
tst_iscan.c unix_io.c unlink.c valid_blk.c version.c: Add an
#ifdef for HAVE_UNISTD_H
unix_io.c (unix_read_blk): If ext2fs_llseek() fails, but errno is
zero, then return EXT2_IO_LLSEEK_FAILED.
ext2_err.et.in: Add a new error code, EXT2_IO_LLSEEK_FAILED.
Fix bug; the current inode number wasn't being set by the
goto_blockgroup function.
bmove.c, ext2fs.h:
Added new argument to bmove, so that the caller can pass the
allocation bitmap. If not specified, the allocation bitmap defaults
to fs->block_map.
bmove.c (ext2fs_move_blocks): New function which takes a bitmap of
blocks which need to be moved, and moves those blocks to another
location in the filesystem.
rs_bitmap.c (ext2fs_resize_generic_bitmap): When expanding a bitmap,
make sure all of the new parts of the bitmap are zero.
bitmaps.c (ext2fs_copy_bitmap): Fix bug; the destination bitmap wasn't
being returned to the caller.
alloc_tables.c (ext2fs_allocate_group_table): Add new function
ext2fs_allocate_group_table() which sets the group tables for a
particular block group. The relevant code was factored out of
ext2fs_allocate_tables().
dblist.c (make_dblist): Adjust the initial size of the directory block
list to be a bit more realize (ten plus twice the number of
directories in the filesystem).
Check in interim work.
Pass the blocksize to the bad blocks command so that all of the
filesystem gets tested in the case where the blocksize 2048 or 4096.
ChangeLog, badblocks.c:
Fix bug where ext2fs_badblocks_list_test would test the list (and
exceed array boundaries) if there were no bad blocks on the bad blocks
list. (Showed up when user tried: mke2fs -c -b 4096).
Theodore Ts'o