Fix a number of non-literal string format warnings from LLVM due
to the use of _() that were not fixed in commit 45ff69ffeb.
Fix mismatched int vs. __u64 format warnings in blkmap64_rb.c.
There were also some comparisons of __u64 start or count <= 0.
Change them to be comparisons == 0, or start + count overflow.
Fix operator precedence warning for (value & (value - 1) != 0)
introduced in 11d1116a7c. It seems "&" is lower precedence
than "!=", so the above didn't fail for power-of-two values,
but only odd values. Fortunately, either s_desc_size nor
s_inode_size is valid if odd.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It's highly unlikely after five seconds that zero blocks would have
been written, but let's silence the Coverity warning.
Addresses-Coverity-ID: 1147780
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Dividing a floating point number by zero is undefined in C. It
happens to work with gcc/glibc, but it's not something that's
guaranteed.
Addresses-Coverity-ID: #1147781
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
This allows "e2image -rp /dev/sdc1 - | bzip2 > sdc1.img.bz2" to work
correctly, so the progress information doesn't corrupt the image being
sent to stdout.
Also add a diagnostic indicating that the -p option is currently only
implemented for raw mode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The old progress reporting code would crash on small file systems.
For example:
cp /dev/null /tmp/foo.img
mke2fs -t ext4 -F /tmp/foo.img 100
e2image -o 0 -O 4096 -rap /tmp/foo.img
Fix this, and while we're at it, factor out the code to make it easier
to read and maintain.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2image progam was originally intended to create image files.
However, some people have started using e2image to copy a file system
from one block device to another, since it is more efficient than
using dd because it only copies the blocks which are in use. If we
are doing this, however, we must not skip writing blocks which are all
zero in the source device, since they may not be zero in the
destination device.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Phillip Susi <psusi@ubuntu.com>
Refactor calls to ext2fs_llseek(). This makes the code more compact,
easier to read, and it also fixes a number of places where we call
ext2fs_llseek() without doing proper error checking.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When doing an in place move, interrupting it past the
point of no return will destroy the filesystem since
parts of it have been overwritten. Catch SIGINT the
first time and issue a warning if this is the case.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When given the -p switch, print progress information, including
block counts, percentage complete, estimated time remaining, and
throughput.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If given at least one offset and only one file, assume source
and dest are the same, and do an in place move.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add -o and -O switches to specify the offset where the source
and destination filesystems start. This is useful if you have
an image of a partitioned disk or wish to create one.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mostly by adding static and removing excess extern qualifiers. Also
convert a few remaining non-ANSI function declarations to ANSI.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Compiling with LLVM generates a large number of warnings due
to the use of _() for wrapping strings for i18n:
warning: format string is not a string literal
(potentially insecure) [-Wformat-security]
./nls-enable.h:4:14: note: expanded from macro '_'
#define _(a) (gettext (a))
^~~~~~~~~~~~
These warnings are fixed by using "%s" as the format string,
and then _() is used as the string argument.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
metadata_csum implies uninit_bg, and in fact forces the bit off for
rocompat with older implementations. Therefore, to detect the
presence of checksums, we should use the predicate function to decide
if group descriptor checksums are turned on, not open-coded flag
tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit bf0449b1a6, which added the ability to write qcow2 files,
generalized the write_header() file to take the size of the header
structure which it writes out. Unfortunately, it changed the call
which supported original e2image format to pass in fs->blocksize,
instead of the actual size of the e2image header structure (which is
substantially smaller than fs->blocksize). This meant that we copied
in stack garbage into the e2image file, and it made valgrind quite
unhappy.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Several users have used e2image on a mounted RW filesystem, resulting in
inconsistent, useless e2images for debugging purposes.
This commit will forbid this and print an error message, although the
user can override this using a new force option.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
All data cannot be included in normal image file so e2image should exit
in this case.
Signed-off-by: Tomas Racek <tracek@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Exit is called right after the install_image anyway so this one can
be removed.
Signed-off-by: Tomas Racek <tracek@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Normally the raw and QCOW2 images only contain fs metadata.
Add a new switch ( -a ) to include all data. This makes it
possible to use e2image to clone a whole filesystem.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since "bool" is a valid C type, declarations of the form "int bool"
will cause compiler errors if <stdbool.h> is included. Rename these
variables to avoid this name clash.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the block bitmap is uninitialized, skip copying it.
When the inode bitmap is uninitialized, skip copying it,
as well as the inode table. When there are unused inodes
towards the end of the table, skip those blocks too.
Signed-off-by: Phillip Susi <psusi@ubuntu.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ftruncate64() exists, try to use it to set i_size. This isn't
guaranteed to work, per SuSv3, but if it doesn't work, it's guaranteed
to return an error. So for file systems and/or operating systems that
don't support extending i_size via ftruncate64(), fall back to writing
the trailing null.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the size of the last "hole" in the raw file was an exact multiple
of a megabyte, then we wouldn't write a null at the end of the file in
order to extend the size of the raw image to correspond with the file
system size. Thanks to Lukas Czerner for suggesting the fix, and
Phillip Susi for pointing out the problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For those e2fsprogs programs which use libcom_err and are
internationalized, pass the gettext() function to libcom_err during
program initialization.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In many places we are using #ifdef HAVE_OPEN64 to determine if we can
use open64() but that's ugly. This commit creates two new helpers
ext2fs_open_file() for open() and ext2fs_stat() for stat(). Also we need
new typedef ext2fs_struct_stat for struct stat.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In flush_l2_cache() we are using ext2fs_llseek() however we do not
properly detect the error code returned from the function, because we
are assigning it into ULL variable, hence we will not see negative
values.
Fix this by changing the type of the variable to ext2_loff_t which is
signed and hence will store negative values.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit adds support for converting QCOW2 image created previously
with e2image into raw image. The QCOW2 image is detected automatically,
so there is not new option. Just use following command:
e2image -r image.qcow image.raw
No that this tool is aimed to quickly convert qcow2 image created with
e2image into raw image. In order to improve speed we are doing some
assumption I believe might not be true for regular qcow2 images. So it
was not tested with regular QCOW2 images and it might not work with
them. The intention of this tool is only convert images previously
created by e2image.
Note that there is nothing special with QCOW2 images created by e2images
and it can be used with tools like qemu-img, or qemu-nbd without any
problems.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This commit adds support for exporting filesystem into QCOW2 image
format. Like sparse format this saves space, by writing only necessary
(metadata blocks) into image. Unlike sparse image, QCOW2 image is NOT
sparse, hence does not change its size by copying with not-sparse-aware
tools.
New options '-Q' has been added to tell the e2image to use QCOW2 as an
output image format. QCOW2 supports encryption and compression, however
e2image so far does no support such features, however you can still
scramble filenames with '-s' option.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>