If the user does not specify the file system size, and the file does
not exist, give an error message like this:
The file /tmp/foo.img does not exist and no size was specified.
instead of this:
Creating regular file /tmp/foo.img
mke2fs: Device size reported to be zero. Invalid partition specified, or
partition table wasn't reread after running fdisk, due to
a modified partition being busy and in use. You may need to reboot
to re-read your partition table.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On big-endian systems, if the dirent swap routine finds a rec_len that
it doesn't like, it continues processing the block as if rec_len == 8.
This means that the name field gets byte swapped, which means that
salvage will not detect the correct name length (unless the name has a
length that's an exact multiple of four bytes), and it'll discard the
entry (unnecessarily) and the rest of the dirent block. Therefore,
swap the rest of the block back to disk order, run salvage, and
re-swap anything after the salvaged dirent.
The test case for this is f_inlinedata_repair if you run it on a BE
system.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix more problems that I found when testing on ppc64:
- Inode swap cut and paste error leads to immutable inodes being
detected as inlinedata inodes, leading to e2fsck incorrectly barfing
on i_block[] contents.
- Superblock csum/verify must be aware of the fs->super byte order
when checking for metadata_csum feature flag. (Hint: in _openfs(),
fs->super is in LE order for the first csum verification)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On BE platforms, we need to swap the inode bytes after doing the
checksum verification but before looking at i_blocks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Select pwrite64 or pwrite depending on what autoconf finds. This
makes e2fuzz find a suitable pwrite variant regardless of platform.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add to ext2fs_symlink the ability to create inline data symlinks.
[ Modified by tytso to add more logging to the test script ]
Suggested-by: Pu Hou <houpu.hp@alibaba-inc.com>
Cc: Pu Hou <houpu.hp@alibaba-inc.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we determine that we can't parse the array value as an integer,
we need to restore the square brackets to the field name, so that we
can find a match with block[IND], block[DIND], and block[TIND] in the
inode field table.
Reported-by: Jun He <jhe@cs.wisc.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The extent count calculation works correctly with the FIBMAP ioctl in
verbose (-v) mode, but without the verbose option, the calculation was
broken because we weren't properly updating the fm_ext data structures
in non-verbose mode.
Addresses-Launchpad-Bug: #1356496
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The following tests were using md5sum: i_e2image, u_mke2fs, and
u_tune2fs. Convert them to use crcsum for better portability (not all
environments have md5sum; some might have sha1sum instead :-)
For our purposes crcsum is quite sufficient.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_flush2() unconditionally writes the block group descriptors to
disk even if the underlying FS isn't marked dirty. This causes the
following error message on a fsck -n run:
e2fsck 1.43-WIP (09-Jul-2014)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Error writing block 2 (Attempt to write block to filesystem resulted in short write). Ignore error? no
Error writing block 2 (Attempt to write block to filesystem resulted in short write). Ignore error? no
Error writing file system info: Attempt to write block to filesystem resulted in short write
Since ext2fs_close2() only calls flush if the dirty flag is set,
modify e2fsck to exhibit the same behavior so that we don't spit out
write errors for a read only check.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a regression test to ensure that previous patches' fixes to e2fsck
do not revert.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In an inline directory, the '..' entry is compacted down to just the
inode number; there is no full '..' entry. Therefore, it makes no
sense to assign 'prev' to the fake dotdot entry we put on the stack,
as this could confuse a salvage_directory call on a corrupted next
entry into modifying stack contents (the fake dotdot entry).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a file is marked inline_data but its i_size isn't a multiple of
four, it probably isn't an inline directory, because directory entries
have sizes that are multiples of four.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Directory entries must have a size that's a multiple of 4; therefore
the inline directory structure must also have a size that is a muliple
of 4. Since e2fsck doesn't check this, we should check that now.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that the directory salvaging operation is fed the block size,
teach pass 2 that it should use the size of the inline data if the
directory is inline_data. Without this, it'll "fix" inline
directories by setting the rec_len to something approaching the FS
blocksize, which is clearly wrong.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we encounter a directory whose i_size != the inline data size, just
set i_size to the size of the inline data. The pb.last_block
calculation is wrong since pb.last_block == -1, which results in
i_size being set to zero, which corrupts the directory.
Clear the inline_data inode flag if we actually /are/ setting i_size
to zero.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we come across an inode with the inline data and extents inode flag
set, try to figure out the correct flag settings from the contents of
i_block and i_size. If i_blocks looks like an extent tree head, we'll
make it an extent inode; if it's small enough for inline data, set it
to that. This leaves the weird gray area where there's no extent
tree but it's too big for the inode -- if /could/ be a block map,
change it to that; otherwise, just clear the inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since fifo, socket, and device inodes cannot have inline data or
extents, strip off these flags if we find them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Inodes with inline_data set do not have iterable blocks, so don't try
to iterate the blocks, because that will just fail, causing e2fsck to
abort.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since the inline data flag will cause the extent/block map iteration
code to abort fsck early, move the test for the inode flag and the
actual block check call further forward in check_blocks. This
eliminates an e2fsck abort on an inline data symlink when the file ACL
block is set.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Perform some basic checks on inline-data symlinks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If i_size indicates that an inode requires a system.data extended
attribute to hold overflow from i_blocks but the EA cannot be found,
offer to truncate the file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ensure that the various blobs in the in-inode EA region do not overlap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The xattr_get method returns to us a pointer to a buffer containing
the EA value. If for some reason we decide to fail out of iterating
the EA part of an inline-data directory, we must free the buffer that
xattr_get passed to us (via inline_data_ea_get).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix up the rest of the inline data code not to complain if there's no
EA, since it's possible that there's no EA because we're in the
process of creating an inline data file. Also, don't return an error
code when removing a nonexistent EA, because there's no reason to.
Furthermore, if we write less than 60 bytes of inline data, remove the
EA to avoid wasting space.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we're doing a strict overwrite (same data size) of data in an
inline data file, we should be able to skip the size check. If the
in-core EA representation is fine but the on-disk EA is slightly
corrupt (this happens when fixing minor errors in an inline dir), the
ext2fs_xattr_inode_max_size() call, which reads the disk EA, can lead
us to think that there's no space when in reality there is no issue
with doing a strict overwrite.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The inline data code fails to perform endianness conversions correctly
or at all in a number of places, so fix this so that big-endian
machines function properly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we're (a) reading EAs into a buffer; (b) byte-swapping EA
entries; or (c) checking EA data, be careful not to run off the end of
the memory buffer, because this causes invalid memory accesses and
e2fsck crashes. This can happen if we encounter a specially crafted
FS image.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Perform a little more sanity checking of EA value offsets so that we
don't crash while trying to load things from the filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In pass 3, convert the "delete files and re-run e2fsck" message to a
proper error code for more consistent error reporting and to make
translation easier.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix clang warnings about forgotten header files, dead code, and pwrite
support on OS X. The unistd.h inclusion also fixes a parameter
truncation bug on i386.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A user who sees the message
***** REBOOT LINUX *****
or
***** FILE SYSTEM WAS MODIFIED *****
might think that e2fsck was complete even though we haven't finished
writing out the superblock or bitmap blocks, and then either forcibly
reboot or power cycle the box, or yank the USB key out while the
storage device is still being written (before e2fsck exits).
So rearrange the exit path of e2fsck so that we flush out the dirty
superblock/bg descriptors/bitmaps before we print the final message.
Also clean up this code so that the flow of control is easier to
understand, and add error checking to catch any errors (normally
caused by I/O errors writing to the disk) for these final writebacks.
Addresses-Debian-Bugs: #757543, #757544
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Dan Jacobson <jidanni@jidanni.org>
This test checks to make sure resize2fs can properly handle a file
system which started life as a normal ext4 file system and then was
grown to a size where meta_bg was enabled, and then shrunk back below
the point where the meta_bg format is still needed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The test verifies that e2fsck can properly fix a file system where the
value of s_first_meta_bg in the superblock is larger than the number
of block group descriptors in the file system. E2fsck will fix this
by clearing the meta_bg feature.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When shrinking a file system, if the number block groups drops below
the point where we started using the meta_bg layout, disable the
meta_bg feature and set s_first_meta_bg to zero. This is necessary to
avoid creating an invalid/corrupted file system after the shrink.
Addresses-Debian-Bug: #756922
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Marcin Wolcendorf <antymat+debian@chelmska.waw.pl>
Tested-by: Marcin Wolcendorf <antymat+debian@chelmska.waw.pl>
If s_first_meta_bg is greater than the of number block group
descriptor blocks, then reading or writing the block group descriptors
will end up overruning the memory buffer allocated for the
descriptors. Fix this by limiting first_meta_bg to no more than
fs->desc_blocks. This doesn't correct the bad s_first_meta_bg value,
but it avoids causing the e2fsprogs userspace programs from
potentially crashing.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit baa3544609 ("libext2fs: have UNIX IO manager use
pread/pwrite) causes a breakage on 32-bit systems where off_t is
32-bits for file systems larger than 4GB. Fix this by using
pread64/pwrite64 if possible, and if pread64/pwrite64 is not present,
using pread/pwrite only if the size of off_t is at least as big as
ext2_loff_t.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No behaviour changes. This will simplify the next commit.
Signed-off-by: Aaron Crane <arc@aaroncrane.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Petr Pisar