Fix clang warnings about forgotten header files, dead code, and pwrite
support on OS X. The unistd.h inclusion also fixes a parameter
truncation bug on i386.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Warn the user to run e2fsck if the superblock or bitmaps fails
checksum verification.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix the handling of 'fs' when closing the FS fails so that we don't
dereference a NULL pointer. Adapt to use ext2fs_close_free while
we're at it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fixes-Coverity-Bug: 1229241
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When do_freefrag() is called from debugfs, the value of optind is
not reset. Rectify that by calling reset_getopt().
Signed-off-by: Artemiy Volkov <artemiyv@acm.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Print filefrag_fiemap() error message to stderr instead of stdout.
Only call ioctl(EXT3_IOC_GETFLAGS) for ext{2,3,4} filesystems to
decide if the ext2 indirect block allocation heuristic shold be used.
Properly handle the the force_bmap (-B) option.
Exit with a positive error number instead of a negative one.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Quiet warnings about signed vs. unsigned character mismatch.
Use __u8 for storing UUIDs instead of char to match the superblock
s_uuid field.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This bug was introduced by commit 7dfefaf413 ("tune2fs: update
journal super block when changing UUID for fs").
Fixes-Coverity-Bug: 1229243
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using -U option you can change the UUID for fs, however it will not work
for journal device, since it have a copy of this UUID inside jsb (i.e.
journal super block). So copy UUID on change into that block.
Here is the initial thread:
http://comments.gmane.org/gmane.comp.file-systems.ext4/44532
You can reproduce this by executing following commands:
$ fallocate -l100M /tmp/dev
$ fallocate -l100M /tmp/journal
$ sudo /sbin/losetup /dev/loop1 /tmp/dev
$ sudo /sbin/losetup /dev/loop0 /tmp/journal
$ mke2fs -O journal_dev /tmp/journal
$ tune2fs -U da1f2ed0-60f6-aaaa-92fd-738701418523 /tmp/journal
$ sudo mke2fs -t ext4 -J device=/dev/loop0 /dev/loop1
$ dumpe2fs -h /tmp/dev | fgrep UUID
dumpe2fs 1.43-WIP (18-May-2014)
Filesystem UUID: 8a776be9-12eb-411f-8e88-b873575ecfb6
Journal UUID: e3d02151-e776-4865-af25-aecb7291e8e5
$ sudo e2fsck /dev/vdc
e2fsck 1.43-WIP (18-May-2014)
External journal does not support this filesystem
/dev/loop1: ********** WARNING: Filesystem still has errors **********
Reported-by: Chin Tzung Cheng <chintzung@gmail.com>
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use EXT2_MIN_BLOCK_SIZE, JFS_MIN_JOURNAL_BLOCKS, SUPERBLOCK_SIZE, and
SUPERBLOCK_OFFSET instead of hardcoded 1024 when it is okay, and also
add a helper ext2fs_journal_sb_start() that will return start of
journal sb with special case for fs with 1k block size.
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When creating a file system using a source directory, also copy any extended
attributes that have been set.
[ Add configure tests for Linux-specific xattr syscalls and add fallback
when compiling on non-Linux systems. --tytso ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ioctl(FIGETBSZ) was used to get block size earlier but 2508eaa7
(filefrag: improvements to filefrag FIEMAP handling) moved to fstatfs
f_bsize which doesn't work well for many files systems.
Block size returned using fstatfs isn't block size but "optimal
transfer block size" as per man page. Even stat st_blksize is
"preferred I/O block size" and in may file systems it may even vary
from file to file (POSIX). This patch changes filefrag to use
FIGETBSZ preferentially over f_bsize.
[ Modified by tytso to add the fallback to f_bsize if FIGETBSZ fails
for some reason ]
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
29758d2 broke -B option which is useful for filesystems not supporting
FIEMAP. Also, fix extents calculation for -B which is broken since
2508eaa7.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide an API to set i_size in an inode and take care of all required
feature flag modifications. Refactor the code to use this new
function.
[ Moved the function to lib/ext2fs/blk_num.c, which is the rest of
these sorts of functions live, and renamed it to be
ext2fs_inode_size_set() instead of ext2fs_inode_set_size() to be
consistent with the other functions in in blk_num.c -- tytso ]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are a number of places where we need convert groups to blocks or
clusters by multiply the groups by blocks/clusters per group.
Unfortunately, both quantities are 32-bit, but the result needs to be
64-bit, and very often the cast to 64-bit gets lost.
Fix this by adding new macros, EXT2_GROUPS_TO_BLOCKS() and
EXT2_GROUPS_TO_CLUSTERS().
This should fix a bug where resizing a 64bit file system can result in
calculate_minimum_resize_size() looping forever.
Addresses-Launchpad-Bug: #1321958
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a few warnings about unused and uninitialized variables.
Also fix util/subst.c to include <sys/time.h> to avoid using
undeclared functions gettimeofday() and futimes().
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Creates a program that fuzzes only the metadata blocks (or optionally
all in-use blocks) of an ext* filesystem. There's also a script to
automate fuzz testing of the kernel and e2fsck in a loop.
[ Modified by tytso to add e2fuzz to the clean makefile rule ]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Port tune2fs' -e flag to mke2fs so that we can set error behavior at
format time, and introduce the equivalent errors= setting into
mke2fs.conf.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The third argument to strncat is the maximum number of characters to
copy out of the second argument; it is not the maximum length of the
first argument.
Therefore, code in a check just in case we ever find a /sys/block/X
path long enough to hit the end of the buffer. FWIW the longest path
I could find on my machine was 133 bytes.
Fixes-Coverity-Bug: 1252003
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, e4defrag avoids increasing file fragmentation by comparing
the number of runs of physical extents of both the original and the
donor files. Unfortunately, there is a bug in the routine that counts
physical extents, since it doesn't look at the logical block offsets
of the extents. Therefore, a file whose blocks were allocated in
reverse order will be seen as only having one big physical extent, and
therefore will not be defragmented.
Fix the counting routine to consider logical extent offset so that we
defragment backwards-allocated files. This could be problematic if we
ever gain the ability to lay out logically sparse extents in a
physically contiguous manner, but presumably one wouldn't call defrag
on such a file.
Reported-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There were other protections which would prevent a buffer overflow
from happening, but we should fix this nevertheless.
Addresses-Coverity-Bug: #1225003
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The single quote character must not be in the first character in a
line, or else it can get mistaken as a macro call.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the mke2fs.conf configuration option which causes the hugefiles to
be aligned to the beginning of the disk. This is important if the the
reason for aligning the hugefiles is to support hard-drive specific
features such as Shingled Magnetic Recording (SMR).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We can set flex_bg count only up to 2^30 with profile
because get_int_from_profile can handle it to 2^31-1.
Add get_uint_from_profile to read unsigned int value
so that mke2fs with profile can handle up to 2^31 flex_bg same as -G option.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mke2fs -G option allows root user to set flex_bg count (power of 2).
However ext4 has bad metadata layout if we specify more than or equal to
2^32 to mke2fs -G, because of the 32bit shift operation
in ext2fs_allocate_group_table().
And the maximum block group count of ext4 is 2^32 -1 (ext4_group_t
s_groups_count), so diallow more than 2^32 flex_bg count.
Steps to reproduce:
# mke2fs -t ext4 -G 4294967296 DEV
# dumpe2fs DEV
...
Flex block group size: 1 <----- flex_bg is 1!
...
Group 0: (Blocks 0-32767)
Checksum 0x4afd, unused inodes 7541
Primary superblock at 0, Group descriptors at 1-1
Reserved GDT blocks at 2-59
Block bitmap at 60 (+60), Inode bitmap at 61 (+61)
Inode table at 62-533 (+62)
32228 free blocks, 7541 free inodes, 2 directories, 7541 unused inodes
Free blocks: 540-32767
Free inodes: 12-7552
Group 1: (Blocks 32768-65535) [INODE_UNINIT]
Checksum 0xc890, unused inodes 7552
Backup superblock at 32768, Group descriptors at 32769-32769
Reserved GDT blocks at 32770-32827
Block bitmap at 32828 (+60), Inode bitmap at 32829 (+61)
Inode table at 32830-33301 (+62)
32234 free blocks, 7552 free inodes, 0 directories, 7552 unused inodes
Free blocks: 33302-65535
Free inodes: 7553-15104
...
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <darrick.wong@oracle.com>
Currently is used did not specified lazy_itable_init option we rely on
information from ext4 module exported via sysfs interface. However if
the ext4 module is not loaded it will not be enabled even though kernel
might support it.
With this commit we set the default according to the kernel version,
however we still allow it to be set manually via extended option or be
enabled in case that ext4 module advertise that it supports this
feature.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Currently there are many uses of ext2fs_close() which might be wrong.
First of all ext2fs_close() does not set the ext2_filsys pointer to NULL
so the caller is responsible for clearing it, however there are some
cases there we do not do it.
Second of all very small number of users of ext2fs_close() actually
check the return value. If there is a problem in ext2fs_close() it will
not even free the ext2_filsys structure, but majority of users expect it
to do so.
To fix both problems this commit introduces a new helper
ext2fs_close_free() which will not only check for the return value and
free the ext2_filsys structure if the call to ext2fs_close2() failed,
but it will also set the ext2_filsys pointer to NULL.
Replace every use of ext2fs_close() in e2fsprogs tools with
ext2fs_close_free() - there is no real reason to keep using
ext2fs_close().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
This is a straight cut and paste from the util-linux
mount manpage to ext4.5 (with commented-out lines
removed).
It's pretty much impossible for util-linux to keep up
with every filesystem out there, and Karel has more than
once expressed a wish that mount options move into fs-specific
manpages.
So, here we go.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The chattr(1) manpage and chattr usage() output were missing some flags.
Add those, and make some other minor cosmetic fixes.
(I've left out the 'B' (EXT2_COMPRBLK_FL) flag, because
it's not actually used anywhere, and I can't figure out
how it differs from 'c' (EXT2_COMPR_FL))
Also, because the matrix of filesystems & flags is quite large,
refer to filesystem-specific manpages for detailed discussion
of flags supported by those filesystems, rather than trying to
cover it all in this manpage. I'll send those manpage
updates to the appropriate lists a bit later.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
The flags described in chattr usage() and the chattr(1) manpage
were in semi-random order, which makes it hard to ascertain
which flags might be missing or undocumented, and to locate
flags within the manpage.
Re-order the list of flags in alphanumeric order, and do
the same for the flag descriptions in the body of the manpage.
There should be no content changes here, just reordering
for consistency.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
It's a bit strange to accept revision levels higher than
the code creating the filesystem can understand, so don't
allow it.
At least the kernel will mount the fs readonly if it's too
high, but no other utility will touch it, so you can't
fix the error.
Just reject anything > EXT2_MAX_SUPP_REV at mkfs time.
Signed-off-by: Frank Sorenson <fsorenso@redhat.com>
[sandeen@redhat.com: Add more verbose commit log]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Quiet a couple of build warnings in tst_libext2fs.c
Add missing unistd.h header for misc/util.c.
Ignore generated files for lib/ext2fs/tst_libext2fs and intl/ files.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
29758d2 filefrag: exit with error code if an error is hit
introduced a couple errors; in one case it missed returning
a value, and possibly picked up errno from (unchecked) close(),
and in the other used a test where it needed an
assignment. So capture the error, move perror() directly
after the failed call in both cases, and fix the assignment.
Also fix a precedence problem with:
if (fe_flags & mask == 0)
which is equivalent to:
if (fe_flags & (mask == 0))
but we need:
if ((fe_flags & mask) == 0)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fix compile warnings found on the master branch when using LLVM.
- Add missing format string when using the libintl _() macro
- include <limits.h> header to get PATH_MAX definition
- fix format vs. variable mismatches
- add header block for create_inode.c file
- remove use of bzero(), use ext2fs_get_memzero() instead
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>