Fix a signed vs. unsigned bug that was accidentally introduced in
commit f1f115a7, which was introduced in e2fsprogs 1.41.0
Addresses-Debian-Bug: #495830
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This simplifies the code, and using the uninit_bg with the inode table
lazily initialized is just as good.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create new functions ext2fs_{set,get}_{inode,block}_bitmap_range()
which allow programs like e2fsck, dumpe2fs, etc. to get and set chunks
of the bitmap at a time.
Move the representation details of the 32-bit old-style bitmaps into
gen_bitmap.c.
Change calls in dumpe2fs, mke2s, et. al to use the new abstractions.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This feature is initially intended for testing purposes; it allows an
ext2/ext3 developer to create very large filesystems using sparse files
where most of the block groups are not initialized and so do not require
much disk space. Eventually it could be used as a way of speeding up
mke2fs and e2fsck for large filesystem, but that would be best done by
adding an RO_COMPAT extension to the filesystem to allow the inode table
to be lazily initialized on a per-block basis, instead of being entirely initialized
or entirely unused on a per-blockgroup basis.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When byte-swapping a filesystem on a PPC architecture, byte-swap
the bitmaps since the historical big-endian ext2 variant had
byte-swapped bitmaps, and the ext2fs library assumes this. Otherwise
the regression test suite will fail...
Makefile.in: Add message.c and swapfs.c to the list of source files to
build the make depend.
swapfs.c, unix.c: Only support the -s and -S options to e2fsck if
ENABLE_SWAPFS is defined.
Many files:
ext2fs.h, bitops.h, block.c, bmap.c, closefs.c, dirblock.c, inode.c,
native.c, openfs.c, rw_bitmaps.c, swapfs.c: Only include the
byte-swapping logic if ENABLE_SWAPFS is turned on or if we're on a
big-endian machine.
initialize.c (ext2fs_initialize):Use WORDS_BIGENDIAN directly to set
EXT2_FLAG_SWAP_BYTES, instead of using ext2fs_native_flag.
native.c (ext2fs_native_flag): Use WORDS_BIGENDIAN provided by
autoconf to determine whether or not return EXT2_FLAG_SWAP_BYTES.
ext2fs.h (EXT2_FLAG_IMAGE_FILE): Add new flag, and add image_header
field in the ext2_filsys structure
block.c (block_iterate_ind, block_iterate_dind, block_iterate_tind):
inode.c (ext2fs_read_inode):
rw_bitmaps.c (read_bitmaps):
openfs.c (ext2fs_open): Add support for EXT2_FLAG_IMAGE_FILE
imager.c (ext2fs_image_bitmap_read): Fix bug in imager to make sure
the full bitmap is saved.
rw_bitmaps.c: Fixed signed/unsigned warnings.
fileio.c (ext2fs_file_set_size): Remove unneeded extern from the
function declaration.
dblist.c (make_dblist): Add safety check in case the dblist pointer
passed in is null (in which case, assign it to fs->dblist). Fixed
some signed/unsigned warnings.
bmap.c: Make addr_per_block be of type blk_t to avoid signed/unsigned
warnings.
namei.c (ext2fs_follow_link): Remove uneeded extern from the function
declaration.
get_pathname.c (get_pathname_proc): Use return value from
ext2fs_get_mem, instead of checking if &gp->name is NULL.
dir_iterate.c (ext2fs_process_dir_block):
dblist_dir.c (ext2fs_dblist_dir_iterate): Remove uneeded extern from
the function declaration.
block.c (ext2fs_block_iterate2): If the read_inode call fails, return
the error directly instead of jumping to the cleanup routine, since we
don't need to do any cleanup.
alloc_table.c (ext2fs_allocate_group_table): Make this function take a
dgrp_t for its group argument.
ext2fs.h: Make dgrp_t an __u32 type, and make fs->desc_group_count be
of type dgrp_t.
ext2_io.h, ext2fs.h: Protect against being included multiple times.
bmove.c: #include ext2fsP.h instead of "ext2fs/ext2fs.h"
test_io.c (test_flush): Add a debugging printf when the flush method
is called.
rw_bitmaps.c (ext2fs_read_bitmaps): If the bitmaps are already read
in, return right away.
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
Added definition of ext2fs_get_mem, ext2fs_free_mem, and
ext2fs_resize_mem in ext2fs.h, and changed all library routines to use
these wrapper functions.
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
io.h: Change the prototype of ext2fs_llseek() to use int's instead of
unsigned int's.
llseek.c: Change to allow PIC and !HAVE_LLSEEK. Add a prototype to
make life easer for GNU Libc 2.
rw_bitmaps.c: On the PowerPC, the big-endian variant of the ext2
filesystem has its bitmaps stored as 32-bit words with bit 0 as the
LSB of each word. Thus a bitmap with only bit 0 set would be, as a
string of bytes, 00 00 00 01 00 ... To cope with this, we
byte-reverse each word of a bitmap if we have a big-endian filesystem,
that is, if we are *not* byte-swapping other word-sized numbers.
ChangeLog, expect.1, image.gz:
f_badinode: Modify test to check for "bad" character and block devices
(i.e., ones which contain garbage block entries)
dosio.c: New file to do DOS/BIOS disk accesses.
namei.c (open_namei): Make pathlen be of type size_t.
llseek.c: Always #include stdlib.h since it's need to define
size_t.
io.h: Use errcode_t for magic numbers.
icount.c (get_icount_el), dupfs.c (ext2fs_dup_handle), dblist.c
(dir_block_cmp): Use size_t where appropriate.
read_bb.c (ext2fs_read_bb_inode), cmp_bitmaps.c
(ext2fs_compare_inode_bitmap): Use blk_t, ino_t and size_t
where appropriate.
closefs.c (ext2fs_flush): Use dgrp_t instead of int where
appropriate.
openfs.c (ext2fs_open), check_desc.c (ext2fs_check_desc): Use blk_t
instead of int where appropriate.
rw_bitmaps.c (read_bitmaps), irel_ma.c, inode.c (ext2fs_write_inode),
initialize.c (ext2fs_initialize): brel_ma.c: Fix to make be
16-bit safe.
link.c (ext2fs_link), unlink.c (ext2fs_unlink), lookup.c (lookup_proc),
ismounted.c (ext2fs_check_if_mounted), block.c (xlate_func):
Add #pragma argsused for Turbo C.
block.c (ext2fs_block_iterate2): Use retval which is a errcode_t type.
bitmaps.c (make_bitmap): Use size_t instead of int where appropriate.
bb_inode.c (set_bad_block_proc): Add #pragma argsused for Turbo C.
alloc.c (ext2fs_new_inode): Use ino_t instead of int for the group number.
get_pathname.c: Use ino_t instead of int where appropriate.
ext2fs.h: Make the magic structure element be errcode_t instead of int.
alloc.c alloc_tables.c badblocks.c bb_compat.c bb_inode.c
bitmaps.c block.c bmove.c brel_ma.c check_desc.c closefs.c
cmp_bitmaps.c dblist.c dblist_dir.c dir_iterate.c dirblock.c
dupfs.c expanddir.c freefs.c get_pathname.c icount.c
initialize.c inline.c inode.c irel_ma.c link.c llseek.c
lookup.c mkdir.c namei.c newdir.c read_bb.c read_bb_file.c
rs_bitmap.c rw_bitmaps.c swapfs.c test_io.c tst_badblocks.c
tst_iscan.c unix_io.c unlink.c valid_blk.c version.c: Add an
#ifdef for HAVE_UNISTD_H