Multi-mount protection is feature that allows mke2fs, e2fsck, and
others to detect if the filesystem is mounted on a remote node (on
SAN disks) and avoid corrupting the filesystem. For e2fsprogs this
means that it checks the MMP block to see if the filesystem is in use,
and marks the filesystem busy while e2fsck is running on the system.
This is useful on SAN disks that are shared between high-availability
servers, or accessible by multiple nodes that aren't in HA pairs. MMP
isn't intended to serve as a primary HA exclusion mechanism, but as a
failsafe to protect against user, software, or hardware errors.
There is no requirement that e2fsck updates the MMP block at regular
intervals, but e2fsck does this occasionally to provide useful
information to the sysadmin in case of a detected conflict.
For the kernel (since Linux 3.0) MMP adds a "heartbeat" mechanism to
periodically write to disk (every few seconds by default) to notify
other nodes that the filesystem is still in use and unsafe to modify.
Originally-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a slicing-by-8 CRC32c implementation for metadata checksumming.
Adapted from Bob Pearson's kernel patch.
Also added a self-test mechanism so we can verify that the crc32c
implementation is working correctly.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
lib/ext2fs/Makefile.in had a buggy entry for blkmap64_ba.c in $(SRCS),
which caused this source file to not have a valid Makefile dependency
entry, so blkmap64_ba.o would not get rebuilt when it needed to be.
Also updated the Makefile dependency for the misc directory while
we're at it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit adds support for exporting filesystem into QCOW2 image
format. Like sparse format this saves space, by writing only necessary
(metadata blocks) into image. Unlike sparse image, QCOW2 image is NOT
sparse, hence does not change its size by copying with not-sparse-aware
tools.
New options '-Q' has been added to tell the e2image to use QCOW2 as an
output image format. QCOW2 supports encryption and compression, however
e2image so far does no support such features, however you can still
scramble filenames with '-s' option.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Flags used during RHEL/Fedora builds lead to a couple type-punning
warnings:
recovery.c: In function 'do_one_pass':
recovery.c:539: warning: dereferencing type-punned pointer will break strict-aliasing rules
./csum.c: In function 'print_csum':
./csum.c:170: warning: dereferencing type-punned pointer will break strict-aliasing rules
The two changes below fix this up.
Note that the csum test binary output changes slightly, but this does
not break any tests.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
namei.o is also needed by e2initrd_helper.
Long term, if we care about reduced e2fsprogs builds, we need a more
general solution for deciding what .o files are needed for a
particular build. Given that install floppies are going (gone?) the
way the dodo bird, we probably don't care, though.
Addresses-Sourceforge-Bug: #2911433
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 1d9b818: dumpe2fs: Print more information about the inline journal
caused dumpe2fs to use ext2fs_file_open2(). Previously the file_io
functions were only used by debugfs, so if debugfs was disabled,
file_io was not built. Now that dumpe2fs is also using file_io, we
need to build it unconditionally.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With 64-bit file systems, mke2fs can take a long time to do things
other than write inode tables. I exported the mke2fs numeric progress
meter and used it for allocating group tables and the final file
system flush.
Signed-off-by: Valerie Aurora (Henson) <vaurora@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Initial design was done by Theodore Ts'o; implementation was fleshed
out by Valerie Aurora Henson. Also includes some fixes from Nick Dokos.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
The tst_csum test is now part of csum.c, so there isn't a separate
tst_csum.c file that should be listed as one of the source files in
lib/ext2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some people don't want to see the concise "kernel-style" make output.
This configure option allows build engines that want to see the full
set of commands executed by the makefile to get what they want. Most
people will find this more distracting than useful, unless they need
to debug the Makefiles.
(It is not necessary to rerun configure to enable this verbose make
output temprarily; if a developer wants to do a quick debug of a
directory's makefile, he or she can simply edit the definition of the
$(E) and $(Q) variables in the Makefile; instructions can be found in
the MCONFIG file which is included in at the beginning of every
Makefile.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs makefiles were using the same Makefile variable
LIBCOM_ERR for the link-line arguments as well as the dependencies.
Since LIBCOM_ERR can now include non-file arguments such as
"-lpthread", we need to use a separate DEPLIBCOM_ERR variable that
only has build file dependencies.
Do the same thing for STATIC_LIBCOM_ERR and PROFILED_LIBCOM_ERR.
Addresses-Sourceforge-Patches: #2813809
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add new blknum.c file which contains funtions to handle blk64_t and
low/high values in super blocks and inodes.
(Includes fixes from Nick Dokos, and additions from Valerie Aurora Henson)
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the test code which is used to build the tst_csum progam from
tst_csum into csum.c under an #ifdef DEBUG to simplify things and to
avoid compile problems caused by not having a prototype for
ext2fs_group_desc_csum().
Addresses-Sourceforge-Bug: #2484331
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Test I/O debugging is incredibly useful for rooting out problems, so
let's enable by default, especially now that its overhead is only
incurred when it is needed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This I/O manager saves the contents of the location being overwritten
to a tdb database. This helps in undoing the changes done to the
file system.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
$(LIBSS) should automatically include @DLOPEN_LIB@ so the right thing
happens for programs that need to use the ss library.
Reorder the library link order for tst_extents since the blkid library
uses libuuid functions.
Thanks to Eric Sandeen for pointing this problem out!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- Add support for computing CRC-16 value.
- Add call to check/verify/set csum on block_groups.
- Add a test program to verify csum operations.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
All files under $(OBJS) and $(SRCS) should be in alphabetical order
but this is not always the case. Let fix some some of these before
applying new files to the list of $(SRCS).
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
--
lib/ext2fs/Makefile.in | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
Move the 32-bit specific bitmap code into gen_bitmap.c, and the
high-level interfaces into bitmaps.c. Eventually we'll move the
new-style bitmap code into gen_bitmap64.c, but first we need to
isolate the code with knowledge of the bitmap internals in one place
first.
In this patch we move allocation, free, copy, clear, set_padding, and
fudge_end function into gen_bitmap.c, and make sure that the bitmaps.c
and bitops.c no longer have any knowledge of the bitmap internals.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This caused FTBFS bugs on AMD64 platforms, since it uses a different
64-bit type when compared with IA64, so we need to make our
autoconfiguration system more intelligent.
Addresses Debian Bugs: #360661, #360317
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The x86 assembly instructures for bit test-and-set, test-and-clear,
etc., interpret the bit number as a 32-bit signed number, which is
problematic in order to support filesystems > 8TB.
Added new inline functions (in C) to implement a
ext2fs_fast_set/clear_bit() that does not return the old value of the
bit, and use it for the fast block/bitmap functions.
Added a regression test suite to test the low-level bit operations
functions to make sure they work correctly.
Note that a bitmap can address 2**32 blocks requires 2**29 bytes, or
512 megabytes. E2fsck requires 3 (and possibly 4 block bitmaps),
which means that the block bitmaps can require 2GB all by themselves,
and this doesn't include the 4 or 5 inode bitmaps (which assuming an
8k inode ratio, will take 256 megabytes each). This means that it's
more likely that a filesystem check of a filesystem greater than 2**31
blocks will fail if the e2fsck is dynamically linked (since the shared
libraries can consume a substantial portion of the 3GB address space
available to x86 userspace applications). Even if e2fsck is
statically linked, for a badly damaged filesystem, which may require
additional block and/or inode bitmaps, I am not sure e2fsck will
succeed in all cases.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a dependency to make sure that the subdirectories are created before
creating all of the object files.
Addresses Sourceforge Bug: #1261553
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Andreas Dilger