On my FC8 install, ismounted.c fails to build because open(O_CREAT) is
used without passing a mode. The following trivial patch fixes it.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When fgets() function fails, contents of the buffer is undefined. That
is, fgets() return value needs to be checked, to avoid undefined behavior.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
support for loopback-mounted filesystems. Check /etc/mtab
if /proc/mounts doesn't turn up any mount flags, since
/etc/mtab has the loopback image filename, instead of
/dev/loop0. Also, check based on st_dev and st_ino, so
that if a relative pathname or a pathnames using symbolic
links are used, we can detect the the filesystem correctly
in those cases. (Addresses Sourceforge bug #619119)
file we are checking is a block device file before looking
at st_rdev, since it's not valid for normal files.
(is_swap_device): Move so that it is outside the
HAVE_MNTENT_H, so that it is always built.
ext2fs_check_if_mounted and ext2fs_check_mount_point which
determines whether or not the specified device is a swap
device by using /proc/swaps. More bulletproofing for
idiotic/careless system administrators!
/etc/mtab to make sure the filesystem is really mounted,
since some broken distributions (read: Slackware) have
buggy boot scripts that don't initialize /etc/mtab before
checking non-root filesystems. (Slackware also doesn't
check the root filesystem separately, and reboot if the
root filesystem had changes applied to it, which is
dangerous and broken.)
ismounted.c (check_mntent_file): Use a test file in / to check to see
if the root filesystem is mounted read-only. This protects against
the case where /etc might not be on /, as well as the case where
/etc/mtab doesn't exist. (Both are should-never happen scenarios, but
you never know...)
ismounted.c: More cleanups for ismounted.c, some from Andreas, some to
clean up Andreas's patches. Use strncpy instead of strcpy to save the
root's mountpoint. Clean up #ifdef structure. Remove uneeded
variable in testing/debug driver.
ismounted.c: Add check for root device which doesn't depend on
/etc/fstab or /proc/mounts to be correct. Don't call endmntent()
before we are done with mnt struct.
ismounted.c (check_mntent): Check /proc/mounts on Linux systems before
checking /etc/mtab. The EXT2_MF_READONLY flag is now set from the
/etc/mtab options field for all filesystems, not just the root
filesystem. Add debugging code to make it easier to test
ext2fs_check_if_mounted().
alloc.c, bb_inode.c, bitmaps.c, bitops.h, block.c, bmap.c, bmove.c,
brel.h, cmp_bitmaps.c, dblist.c, dblist_dir.c, dir_iterate.c,
expanddir.c, ext2fs.h, ext2fsP.h, fileio.c, finddev.c, get_pathname.c,
icount.c, inode.c, irel.h, irel_ma.c, ismounted.c, link.c, lookup.c,
mkdir.c, mkjournal.c, namei.c, newdir.c, read_bb_file.c, test_io.c,
tst_iscan.c, unix_io.c, unlink.c: Change use of ino_t to ext2_ino_t,
to protect applications that attempt to compile
-D_FILE_OFFSET_BITS=64, since this inexplicably changes ino_t(!?). So
we use ext2_ino_t to avoid an unexpected ABI change.
ismounted.c: add ext2fs_check_mount_point() function, which will
optionally return the mount point of a device if mounted
ChangeLog, closefs.c, ext2fs.h:
ext2fs.h, closefs.c (ext2fs_flush): Add new flag,
EXT2_FLAG_SUPER_ONLY, which the close routines to only update the
superblock, and not the group descriptors.
debugfs.c (dump_inode): Remove #ifdef for i_version vs. i_generation
since we know it will always be i_generation now.
ChangeLog, e2fsck.h, flushb.c, scantest.c:
e2fsck.h, flushb.c, scantest.c: Remove uneeded include of linux/fs.h
bmap.c:
Fix silly spelling typo.
ChangeLog, getsize.c, ismounted.c, swapfs.c:
getsize.c, ismounted.c: Remove unneeded include of linux/fs.h
swapfs.c: Remove #ifdef HAVE_EXT2_INODE_VERSION since it's not needed
any more; we know it will always be i_generation. Add support for
swapping the high bits of the uid and gid.
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
dosio.c: New file to do DOS/BIOS disk accesses.
namei.c (open_namei): Make pathlen be of type size_t.
llseek.c: Always #include stdlib.h since it's need to define
size_t.
io.h: Use errcode_t for magic numbers.
icount.c (get_icount_el), dupfs.c (ext2fs_dup_handle), dblist.c
(dir_block_cmp): Use size_t where appropriate.
read_bb.c (ext2fs_read_bb_inode), cmp_bitmaps.c
(ext2fs_compare_inode_bitmap): Use blk_t, ino_t and size_t
where appropriate.
closefs.c (ext2fs_flush): Use dgrp_t instead of int where
appropriate.
openfs.c (ext2fs_open), check_desc.c (ext2fs_check_desc): Use blk_t
instead of int where appropriate.
rw_bitmaps.c (read_bitmaps), irel_ma.c, inode.c (ext2fs_write_inode),
initialize.c (ext2fs_initialize): brel_ma.c: Fix to make be
16-bit safe.
link.c (ext2fs_link), unlink.c (ext2fs_unlink), lookup.c (lookup_proc),
ismounted.c (ext2fs_check_if_mounted), block.c (xlate_func):
Add #pragma argsused for Turbo C.
Theodore Ts'o