If we're using check_plausibility() to try to identify something that
obviously isn't an ext* filesystem and libblkid doesn't know what it
is, try libmagic instead.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If any of these utilities detect a bad superblock magic, call
check_plausibility to see if blkid can identify the passed-in argument
as something else (xfs, partition, etc.) in the hopes of catching a
user error.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move check_plausibility() into a separate file so that various
programs can use it without having to declare useless global variables
that the util.c functions seem to require.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Creates a program that fuzzes only the metadata blocks (or optionally
all in-use blocks) of an ext* filesystem. There's also a script to
automate fuzz testing of the kernel and e2fsck in a loop.
[ Modified by tytso to add e2fuzz to the clean target ]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are interfaces that are used by mke2fs.c and tune2fs.c which are
in quotaio.h, and some future changes will be much simpler if we can
combine the two header files together. Also the guard #ifdef for
mkquota.h was incorrect, which caused problems when both header files
needed to be included.
Also remove quota.pc and installation rules for libquota, since this
library is never going to be something that we can export externally
anyway. Eventually we'll want to clean up the interfaces and move the
external publishable interfaces to the libext2fs library, and then
rename what's left from libquota.a to libsupport.a for internal use
only.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Aditya Kali <adityakali@google.com>
Fix some minor bugs relating to passing CFLAGS to cppcheck, and
package the cppcheck output into nicer looking reports.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This option is used for adding the files from a given directory (the
root-directory) to the filesystem, it is similiar to genext2fs, but
genext2fs doesn't fully support ext4.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To check the coverage of e2fsprogs's regression test, do the
following:
configure --enable-gcov
make -j8 ; make -j8 check ; make coverage.txt
The coverage information will be the coverage.txt and *.gcov files in
the build directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Newer versions of autoconf pull in AC_PROG_GCC as part of
AC_CANONICAL_HOST. So we need check for WITH_DIET_LIBC earlier in
configure.in.
Also, e2fsprogs now needs functions which are found in diet libc's
compat library. So add support for autoconf's LIBS function, and
automatically set libs to include -lcompat.
Finally, disable compiling e4defrag by deault if --with-diet-libc is
specified because the program has too many glibc dependencies.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Run sparse against source files when building e2fsprogs with 'make C=1'. If
instead C=2, it configures basic ext2 types for bitwise checking with sparse,
which can help find the (many many) spots where conversion errors are
(possibly) happening.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also fix a bug caused by a stray continuation backslash which caused
the e2fsck/Makefile to fail when profiling is enabled.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
The Build Log Hardening Check is a debian tool which scans the output
of a package build making sure that the security hardening flags are
used when compiling and linking all of binaries in a package.
For the most part we were passing CFLAGS, CPPFLAGS, and LDFLAGS down
to the compiler and link commands, but there there were one or two
exceptions. In addition, there where a few places in "make install"
where the V=1 option was not being honored, which triggered blhc
warnings since it couldn't analyze those commands.
The e2fsck.static was the only binary that was not getting built and
packaged with the hardening flags, but I've fixed all of the blhc
warnings so in the future it will be obvious if we regress.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Quite some definitions in quota library are not necessary. Remove them.
Also fold quota.h file into quotaio.h since it didn't contain that many
definitions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rename mke2fs.conf to mke2fs.conf.in, so that the makefile can choose
to use either mke2fs.conf.in or mke2fs.conf.custom.in (if it is
present). If there is custom configuration file, it's likely that it
is very different from the upstream mke2fs.conf.in, so by having the
separate mke2fs.conf.custom.in file, it minimizes merge conflicts if
the upstream mke2fs.conf file changes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for setting the quota feature in superblock
and allows selectively creating quota inodes (user or group or both)
in the superblock. Currently, modifying the quota feature is only
supported when the filesystem is unmounted.
Also, when setting the quota feature, tune2fs will use aquota.user or
aquota.group file inode number in superblock if these files exist.
Otherwise it will initialize empty quota inodes #3 and #4 and use them.
Here is how it works:
# Set quota feature and initialize both (user and group) quota inodes
$ tune2fs -O quota /dev/ram1
# Enable only one type of quota
$ tune2fs -Q usrquota /dev/ram1
# Enable grpquota, disable usrquota
$ tune2fs -Q ^usrquota,grpquota /dev/ram1
# Clear quota feature and remove quota inodes
$ tune2fs -O ^quota /dev/ram1
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mke2fs also creates quota inodes (userquota: inode# 3 and
groupquota: inode #4) inodes while creating a filesystem when 'quota'
feature is set.
# To set quota feature and initialize quota inodes during mke2fs:
$mke2fs -t ext4 -O quota /dev/ram1
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
lib/ext2fs/Makefile.in had a buggy entry for blkmap64_ba.c in $(SRCS),
which caused this source file to not have a valid Makefile dependency
entry, so blkmap64_ba.o would not get rebuilt when it needed to be.
Also updated the Makefile dependency for the misc directory while
we're at it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These options allow e2fsprogs to be built using symlinks instead of
hard links, and to be installed using symlinks instead of hard links,
respectively.
Addresses-Sourceforge-Bug: #1436294
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit forces the use of the system-provided blkid or uuid header
files if we are using the system-provided blkid or uuid libraries.
This avoids using the in-tree header files with the system libraries.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some people don't want to see the concise "kernel-style" make output.
This configure option allows build engines that want to see the full
set of commands executed by the makefile to get what they want. Most
people will find this more distracting than useful, unless they need
to debug the Makefiles.
(It is not necessary to rerun configure to enable this verbose make
output temprarily; if a developer wants to do a quick debug of a
directory's makefile, he or she can simply edit the definition of the
$(E) and $(Q) variables in the Makefile; instructions can be found in
the MCONFIG file which is included in at the beginning of every
Makefile.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs makefiles were using the same Makefile variable
LIBCOM_ERR for the link-line arguments as well as the dependencies.
Since LIBCOM_ERR can now include non-file arguments such as
"-lpthread", we need to use a separate DEPLIBCOM_ERR variable that
only has build file dependencies.
Do the same thing for STATIC_LIBCOM_ERR and PROFILED_LIBCOM_ERR.
Addresses-Sourceforge-Patches: #2813809
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
To make it easier to maintain changes and fixes to the e4defrag
program, check it into the e2fsprogs source tree.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add an option to switch between the private (in-tree) libblkid and
public (in-system installed) library. The private version is still
enabled by default.
If --disable-libblkid is specified the findfs(8) program, which is a
variant of tune2fs, is also not built or installed.
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Nice for testing w/o needing to swizzle around system
libraries...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Darrick J. Wong