One of these fixes was triggering failures when running:
./test_scripts --valgrind r_move_itable r_inline_xattr r_resize_inode
It should be a false positive, but it fixing this makes it easier to
see real problems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Resize2fs can't handle resizing flex_bg file systems that do not have
the resize inode, but when the kernel adds support for resizing using
the meta_bg layout, we should allow it be able to resize the file
system.
So move the flex_bg/resize_inode check to the just before we start
doing the off-line resize, instead of doing it earlier where it would
prohibit these file systems for both on-line and off-line resizes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The 16TB limit must be enforced regardless of whether the new size is
specified on the command line or implied by the size of the device,
but only if the file system does not support 64-bit block sizes, or
the kernel does not advertise support of meta_bg resizing.
Previously we were unconditionally enforcing it when it was implied by
the device size, but not if the new size was specified on the command
line.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
By passing EXT2_FLAG_64BITS to ext2fs_open2() we can avoid some
unnecessary redirection in critical paths. While resize2fs does not
currently otherwise support so big filesystems that this would matter,
passing this flag is entirely harmless and only tells libext2fs that
the caller has been recompiled against current headers.
With this change the CPU time needed to shrink a 100G filesystem drops
by 20%.
Signed-off-by: Sami Liedes <sami.liedes@iki.fi>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Clean up some compile warnings related to fstat64(), which is
verbosely deprecated on OSX.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For those e2fsprogs programs which use libcom_err and are
internationalized, pass the gettext() function to libcom_err during
program initialization.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In many places we are using #ifdef HAVE_OPEN64 to determine if we can
use open64() but that's ugly. This commit creates two new helpers
ext2fs_open_file() for open() and ext2fs_stat() for stat(). Also we need
new typedef ext2fs_struct_stat for struct stat.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before we go whole-hog on 64-bit e2fsprogs, I wonder if this
is worth considering as a last-minute addition to the 1.41
stream. Currently, mke2fs will shave a block off an exactly-16T
device to fit*, but resize2fs does not do the same, leading
to some asymmetry. This patch fixes that up, and allows 16T
devices to be handled more gracefully in offline resize.
(in fact resize2fs will not even open a 16T device, today).
*commit 37d17a65ec
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Requiring an immediate pre-fsck before printing a minimum
resize size seems a bit draconian; if the fs isn't clean or marked
with error, then certainly, but for an informational minimum
size, I don't think we need to require a fsck since last mount.
I had simply copied the checks from the actual resize path,
previously.
Installers use this option (-P) to gather minimum resize info,
and requiring an actual fsck before use just seems to go too far.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Right now, resize2fs -P on a dirty filesystem will give you a number;
however, it's probably wrong if the fs is not clean:
# resize2fs -P myimage.img
resize2fs 1.41.9 (22-Aug-2009)
Estimated minimum size of the filesystem: 75623
# e2fsck -fy myimage.img
e2fsck 1.41.9 (22-Aug-2009)
myimage.img: recovering journal
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
myimage.img: ***** FILE SYSTEM WAS MODIFIED *****
myimage.img: 9530/53760 files (0.1% non-contiguous), 24737/98304 blocks
# resize2fs -P myimage.img
resize2fs 1.41.9 (22-Aug-2009)
Estimated minimum size of the filesystem: 32165
We should issue the same "Please run e2fsck ..." message for
-P as we do for an actual resize request.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When running resize2fs -M, no need to recalculate the minimal fs size.
Signed-off-by: "Peng Tao" <bergwolf@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the resize operation fails in the middle of the operation, mark the
filesystem as needing to be checked, and tell the user that they
should run e2fsck -fy on the device.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The resize2fs program was freeing the mountpoint information too
early, so garbage was getting printed instead of the correct
information in an error message.
Addresses-Debian-Bug: #535452
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Without a force flag, don't allow resize2fs to even start resizing
below what it thinks the minimum safe value is.
This may stop resizes which could otherwise proceed with a bit
of space still left, but seems like a reasonably safe thing to do.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Resize2fs will attempt to truncate an image file of a filesystem down
to size for the convenience of the system administrator. If the
truncate operation fails, print a warning message. This also avoids a
gcc warning message.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we don't check for new_size == 0, bogus values send resize2fs into
a tailspin:
resize2fs 1.41.0 (10-Jul-2008)
Illegal block number passed to ext2fs_test_block_bitmap #1 for block bitmap for
/tmp/tmp.lntZtMFvz8/fake-disk
...the same message repeated zillion times...
Probably should see where that loop is, but at any rate we should
error-check parse_num_blocks.
Thanks to Petr Muller for reporting this.
Addresses-Red-Hat-Bugzilla: #465984
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In order to make it possible for the test_io manager to be compiled in
by default, make all of the programs that might try to use it to only
do so if the environment variables TEST_IO_FLAGS and TEST_IO_DEBUG are
set.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allow the old name of uninit_groups when converting feature names for
backwards compatibility for scripts running mke2fs and tune2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the -P option to print the minimum filesystem size and exit.
Add the -M option to force resizing the filesystem to the minimum
filesystem size.
Signed-off-by: Josef Back <jbacik@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Apparently Mac OS 10.5 defines fstat64(), but not ftruncate64(),
causing resize2fs to fail to build. So check explicitly for
ftruncate64(), and fall back to ftruncate() if necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we can't use ftruncate64(), and have to use ftruncate() instead,
make sure that we don't accidentally truncate the size when we chop it
down to an off_t before calling ftruncate(), lest we severely damage a
filesystem image file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Store the RAID stride value when a filesystem is created with a requested
RAID stride, and then use it automatically in resize2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change all of the e2fsprogs programs to use the newer add_error_table()
and remove_error_table() interfaces instead of the much older
initialize_*_error_table() function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Resize2fs will now automatically determine the RAID stride parameter that
had been used to create the filesystem, and use that for newly created
block groups. The RAID stride parameter may also be manually specified
on the command line using the new -S option to resize2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the format string(%d, %ld) for a block number and inode number
to %u or %lu.
Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the filesystem is mounted, open it in read-only mode since the userspace
program should not try to modify it directly. If the filesystem is not mounted,
open it in exclusive mode to avoid potential problems (such as someone
trying to mount the filesystem while it is being resized).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
example, /tmp/test.img?offset=1024. Multiple options can separated using
the & character, although at the moment the only option implemented is
the offset option in the unix_io layer.
parameter, and make the error and information messages
display explicitly the blocksize used by the filesystem,
to avoid confusion. (Addresses Debian bug: #189814)
Theodore Ts'o