Mke2fs previously would give an error if the user tried setting the
stride and stripe-width parameters to zero; but this is necessary to
override the stride and stripe-width settings which get automatically
set from the block device's geometry information in sysfs. So allow
setting these parameters to zero.
Addresses-Google-Bug: #4988555
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The extended options parsing for mount_opts was horribly buggy.
Invalid mount options that had an argument would get interpreted as an
extended mount options. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tune2fs previously would give an error if the user tried setting the
stride and stripe-width parameters to zero; but this is necessary to
disable the stride and stripe-width settings. So allow setting these
superblock fields to zero.
Addresses-Google-Bug: #4988557
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
lib/ext2fs/Makefile.in had a buggy entry for blkmap64_ba.c in $(SRCS),
which caused this source file to not have a valid Makefile dependency
entry, so blkmap64_ba.o would not get rebuilt when it needed to be.
Also updated the Makefile dependency for the misc directory while
we're at it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Treat the s_blocks_count field in the superblock as a free block count
(instead of the number of free clusters) for bigalloc file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the ability to skip zeroing journal blocks on disk. This can
significantly speed up mke2fs with large journals. At worst the
uninitialized journal is only a very short-term risk (if at all),
because the journal will be overwritten on any new filesystem as
soon as any significant amount of data is written to disk, and
the new journal TID would need to match the offset/TID of an old
commit block still left on disk.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add description of missing dir_index feature to tune2fs(8) man page.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If "mke2fs -n" is used, there should be no changes to the underlying
device. Unfortunately, when the "discard" option was added in commit
c7cd908be5, it did not check for the "-n"
flag, and will discard all data on a flash device even if "-n" is given.
Check for the "noaction" flag before discarding any filesystem data.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The log2 of the ratio of cluster size to block size is far more useful
than just storing the cluster size. So make this change, and then
define basic utility macros: EXT2FS_CLUSTER_RATIO(),
EXT2FS_CLUSTER_MASK(), EXT2FS_B2C(), EXT2FS_C2B(), and
EXT2FS_NUM_B2C().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add the check of maximum check interval.
s_checkinterval is 32bit variable, so it cannot be set more than 2^32.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In e2fsprogs, the upper limit of reserved blocks count is a half of
filesystem's blocks count. This patch fixes the incorrect checks of
reserved blocks count.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block devices may set minimum or optimal IO hints equal to
blocksize; in this case there is really nothing for ext4
to do with this information (i.e. search for a block-aligned
allocation?) so don't set fs geometry with single-block
values.
Zeev also reported that with a block-sized stripe, the
ext4 allocator spends time spinning in ext4_mb_scan_aligned(),
oddly enough.
Reported-by: Zeev Tarantov <zeev.tarantov@gmail.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This commit adds support for converting QCOW2 image created previously
with e2image into raw image. The QCOW2 image is detected automatically,
so there is not new option. Just use following command:
e2image -r image.qcow image.raw
No that this tool is aimed to quickly convert qcow2 image created with
e2image into raw image. In order to improve speed we are doing some
assumption I believe might not be true for regular qcow2 images. So it
was not tested with regular QCOW2 images and it might not work with
them. The intention of this tool is only convert images previously
created by e2image.
Note that there is nothing special with QCOW2 images created by e2images
and it can be used with tools like qemu-img, or qemu-nbd without any
problems.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This commit adds support for exporting filesystem into QCOW2 image
format. Like sparse format this saves space, by writing only necessary
(metadata blocks) into image. Unlike sparse image, QCOW2 image is NOT
sparse, hence does not change its size by copying with not-sparse-aware
tools.
New options '-Q' has been added to tell the e2image to use QCOW2 as an
output image format. QCOW2 supports encryption and compression, however
e2image so far does no support such features, however you can still
scramble filenames with '-s' option.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for specifying 'reserved_ratio' (percent blocks
reserved for super user, same as '-m' command line option) in mke2fs.conf.
It adds profile_get_double function in profile.c that allows reading
floating point values from profile files.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
/boot/a: 0 extents found
works properly, but
Filesystem type is: ef53
Filesystem cylinder groups is approximately 61
File size of a is 0 (0 blocks, blocksize 1024)
ext logical physical expected length flags
a: 1 extent found
yields 1 extent when it should be 0.
Fix this up by special-casing no extents returned in verbose
mode; skip printing the header for the columns too, since there
are no columns to print.
Also, in nonverbose mode we can set fm_extent_count to 0
so that FIEMAP will just query the extent count without gathering
details; clarify this with a comment.
Addresses-RedHat-Bugzilla: 653234
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a few typos in manpages.
Reported-by: Branislav Náter <bnater@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Check to see if the device supports discard before starting the
progress bar, and then printing an error about inappropriate ioctl for
device (when creating a file system image to a file, for example).
Also, add a function signature in the ext2_io.h header file for
io_channel_discard() and fix an extra, uneeded argument in mke2fs's
call to that function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds the superblock fields needed so that dumpe2fs works and the
code points and renames the superblock fields from describing
fragments to clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For some time now we are doing initial discard of the device prior to
filesystem creation. However, there is no feedback for the user and
hence on some devices with slow TRIM implementation it may appear that
mke2fs is stuck.
This commit introduce new function mke2fs_discard_device(), which is a
wrapper for io_channel_discard(). The discard is done in chunks of
2GB, which seems reasonably well for both slow and fast devices, and
discard progress is reported back to the user.
I gave up on doing fancy things like align discard according to
discard_alignment, checking for discard granularity and computing
estimate time. First of all, because it would require either new ioctl
to retrieve those information or use of libudev library, none of it
seems to be worth it. Regarding discard_granularity, I doubt there is
any sane device with discard granularity that big it would affect this.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It is not true that 'nodiscard' is set as default, so remove this
sentence. The default is 'discard' and it is properly documented in man
page.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
User namespace xattrs are generally useful, and I think extN
is the only filesystem requiring a special mount option to
enable them, when xattrs are otherwise available. So this
change sets that mount option into the defaults, via a
mke2fs.conf option.
Note that if xattrs are config'd off, this will lead to a
mostly-harmless:
EXT4-fs (sdc1): (no)user_xattr options not supported
message at mount time...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The forced fsck often comes at unexpected and inopportune moments,
and even enterprise customers are often caught by surprise when
this happens. Because a filesystem with an error condition will
be marked as requiring fsck anyway, I submit that the time-based
and mount-based checks are not particularly useful, and that
administrators can schedule fscks on their own time, or tune2fs
the enforced intervals if they so choose. This patch disables the
intervals by default, and I've added a new mkfs.conf option to
turn on the old behavior of random, unexpected, time-consuming
fscks at boot time. ;)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When using the -v option, report a breakdown of the number of read,
write, and comparison errors that were found by badblocks.
Thanks to Ragnar Kjørstad for providing this patch.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If there was a bad block for block #0, badblocks would never switch
back testing blocks more efficiently. In addition, we were
double-incrementing the blocks to be tested in the read/write test due
to failure to remove code.
Thanks to Ragnar Kjørstad for pointing these problems out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With Direct I/O, the kernel can report 0 bytes read even though the
first block has no errors. So there are any errors, we need try to
read/write blocks one at a time and to get an accurate report.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently, e4defrag always does byte-swapping when it gets superblock
information, so the calculation of the best extents count is not
correct on little endian machine. This doesn't cause data corruption,
but it may confuse users by showing the wrong extent count. To solve
this problem, we use ext2fs_open() instead of get_superblock_info()
that is the original function.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a file gets deleted or truncated while e4defrag is trying to
operate on it, it's possible for it seg fault.
Addresses-Red-Hat-Bugzilla: #641926
Reported-by: Michal Piotrowski <mkkp4x4@gmail.com>
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o