Allow the old name of uninit_groups when converting feature names for
backwards compatibility for scripts running mke2fs and tune2fs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Provide mke2fs with a much more sophisticated system for controlling
configuration parameters of a newly created filesystem based on a
split filesystem and usage type system. The -t option to mke2fs was a
deprecated alias to -c; it now specifies a filesystem type (ext2,
ext3, ext4, etc.), while the -T option can now be a comma separated
usage list.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The m_no_opt test has been silently failing since the addition of
mke2fs.conf, since it was trying to use resize_inode on a non-sparse
filesystem. Fix it so it works correctly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Split the m_lazy testcase into two tests - one that has resize enabled,
and one that does not. There were previously problems with lazy+resize
because the resize feature consumed blocks in some of the groups.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Never set the UNINIT_BLOCKS flag for the last group since the kernel
doesn't handle the case graefully if there is a full set of blocks in
each blockgroup marked UNINIT_BLOCKS. The kernel should be fixed up,
but in the meantime this avoids hitting the problem, and is more
consistent with lazy_bg not marking the last group UNINIT.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add test case to test for uninit block groups.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add test case for lazy bg feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch has all the necesary pieces to open and fix filesystems created
with the uninit block group feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the prompt so it is clear to the user that e2fsck will be
clearing the htree information, not the directory inode itself, when
the htree information has proven to be corrupt.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a directory's i_size is bigger than the number of blocks, don't try
to allocate extra empty blocks to the end of the directory; there's no
real point to do that. Also, if a directory's i_size is not a
multiple of the blocksize, flag that as a mistake so it can be fixed.
This more elegantly addresses the problem which was found on Bas van
Schaik's filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The image contains an inode past the resize point with an inline xattr
value of "propervalue". It also contains deleted inodes which had the
xattr value "oldvalue".
When resize2fs moves the inode, it should copy the xattr as well, so
that post-resize we see "propervalue" not "oldvalue".
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since the test_script driver uses [A-Za-z], we need to set the locale
so we don't get bitten on locals where the sort order might be
different.
Addresses-Sourceforge-Bug: #1890526
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since recent kernels have a tendency to set this feature willy-nilly,
let's just enable by default. It's only very old kernels that don't
support it any more.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This makes it easier to upgrade to ext4 in the future, and it speeds
up extended attributes handling --- important on SELinux systems!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Older e2fsck's would crash; e2fsck should now automatically retry
using the backup superblock if it is present.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The resize2fs tests, r_move_itable and r_resize_inode, were not
deleting the test.img tmpfile after completing the test.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
E2fsck currently only retries with the backup superblock if the
primary superblock is missing (e.g., overwritten with garbage). If
the superblock is just corrupted enough that it looks like ext2/3/4
superblock, but it is corrupt enough that ext2fs_open2() returns an
error, e2fsck stops without retrying. Let's fix this oversight.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The test in ext2fs_check_desc() is off by one; if the inode table
goes all the way to the last block of the block group, it will
falsely assert that it has extended past it. The last block
of a range is start + len -1, not start + len.
You can create (valid) filesystems that will cause e2fsck to complain
via one of the following mkfs commands:
mkfs.ext3 -F -b 1024 /dev/sdb1 2046000000
mke2fs -j -F -b 4096 -m 0 -N 5217280 /mnt/test/fsfile2 327680
mkfs.ext2 -F -b 1024 -m 0 -g 256 -N 3744 fsfile 1024
Addresses-Red-Hat-Bugzilla: #214765
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For some odd geometries*, mkfs will try to allocate inode tables off
the end of the block group and fail, rather than warning that too
many inodes have been requested.
This is because when ext2fs_initialize calculates metadata overhead,
it is only adding in group descriptor blocks and the superblock
if the *last* bg contains them - but the first bg also has all of
the various metadata bits taking up space.
We need to calculate the overhead both for the first block group and
the last block groups separately, since the two different tests need
to know what the overheads are for those two cases, which may be
different.
*for example "mke2fs -b 1024 -m 0 -g 256 -N 3745 fsfile 1024"
(Note, the test here is a little funky; the expected output is
actually a mkfs failure - but a proper failure instead of the
allocator catching the problem at the last minute)
Addresses-Red-Hat-Bugzilla: #241767
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Recently, one of our customers found this message in pass2 of e2fsck
while doing some regression testing:
"Entry '4, 0x695a, 0x81ff, 0x0040, 0x8320, 0xa192, 0x0021' in ??? (136554) has
rec_len of 14200, should be 26908."
Both the displayed rec_len and the "should be" value are bogus. The
reason is that salvage_directory sets a offset beyond blocksize
leading to bogus messages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
LC_ALL is the "high priority" environment variable that overrides all
others, where as LANG is the lowest priorty environment variable. If
LC_ALL is set, it doesn't matter whether LANG, LANGUAGE, LC_COLLATE,
LC_MESSAGES, and the all the rest are set. This will assure that the
locale when running the test suites is the "C" locale.
Obviates Gentoo patch: e2fsprogs-1.38-tests-locale.patch
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the journal had been removed because it was corrupt, the
E2F_FLAG_JOURNAL_INODE flag will be set. If this flag is set, then
recreate the filesystem after checking the filesystem.
Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
I think this is a small buglet in e2fsck: if a file has multiple hard
links, e2fsck pass1c search_dirent_proc() doesn't maintain its count
properly and may return DIRENT_ABORT before it has found containing
directories for all inodes sharing blocks.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When patching and unpatching quilt files, empty directories get left
behind in the tests/ directory. Ignore them to avoid false test
failures.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o