Older kernels on 64-bit machines would incorrectly encode pre-1970
ext4 dates as post-2311 dates. Detect and correct this (assuming the
current date is before 2242).
Include tests for this, as well as changes to debugfs to correctly
set crtimes.
Signed-off-by: David Turner <novalis@novalis.org>
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If resize2fs_get_alloc_block() allocates from a BLOCK_UNINIT group, we
need to make sure that the UNINIT flag is cleared on both file system
structures which are maintained by resize2fs. This causes the
modified bitmaps to not get written out, which leads to post-resize2fs
e2fsck errors; used blocks in UNINIT groups, not marked in the block
bitmap. This was seen on r_ext4_small_bg.
This patch uses clear_block_uninit() to clear the flag,
and my problem goes away.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace the EXT2FS_RB_EMPTY_ROOT(), EXT2FS_RB_EMPTY_NODE(),
EXT2FS_RB_CLEAR_NODE(), IS_BLOCK_BM(), IS_INODE_BM(), and
IS_INODE_TB() macros with static inline functions to avoid
suprious compiler warnings with clang:
pass1.c:618:28: warning: equality comparison with extraneous
parentheses [-Wparentheses-equality]
if ((*((__u32 *)(entry)) == 0UL)) {
~~~~~~~~~~~~~~~~~~~~^~~~~~
pass1.c:618:28: note: remove extraneous parentheses
around the comparison to silence this warning
if ((*((__u32 *)(entry)) == 0UL)) {
^~
pass1.c:618:28: note: use '=' to turn this equality
comparison into an assignment
if ((*((__u32 *)(entry)) == 0UL)) {
^~
=
The static inline functions should compile identically, and allow
some extra compile-time checking for the arguments over macros.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Richard Purdie reports that libext2fs doesn't sort attribute keys in
the xattr block correctly, causing the kernel to return -ENODATA when
querying attributes that should be there. Therefore, sort attributes
so that whatever ends up in the xattr block is sorted according to
what the kernel expects.
Cc: Darren Hart <dvhart@linux.intel.com>
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tested-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allow the filesystem to store the metadata checksum seed in the
superblock and add an incompat feature to say that we're using it.
This enables tune2fs to change the UUID on a mounted metadata_csum
FS without having to (racy!) rewrite all disk metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Li Xi's patch was missing the sources for fgetproject.c and
fsetproject.c. I've created replacement files which will service the
purpose.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Chattr and lsattr can be used to set or get project ID:
chattr -p <project id> file
lsattr -p file
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The EXT2_GETVERSION ioctl is defined to take a "long" parameter, but
fgetversion() calls ioctl() with an "int" parameter instead. This is
handled in the kernel correctly, but the generation is sign-extended
in fgetversion() before return on 64-bit systems and lsattr prints
it as a huge positive number for inode generation above 0x80000000:
1635574212 -------------e-- /mnt/ost0/O/0/d0/12928
18446744073045131735 -------------e-- /mnt/ost0/O/0/d0/166240
782808861 -------------e-- /mnt/ost0/O/0/d0/31744
18446744072181134840 -------------e-- /mnt/ost0/O/0/d0/135008
Correctly assign the returned generation number as an unsigned value,
and print it with a 10-character field width. The version is printed
left-aligned for consistency with the old code and to ensure it is
always printed in the first column for use with tools like "cut":
1635574212 -------------e-- /mnt/ost0/O/0/d0/12928
3630547415 -------------e-- /mnt/ost0/O/0/d0/166240
782808861 -------------e-- /mnt/ost0/O/0/d0/31744
2766550520 -------------e-- /mnt/ost0/O/0/d0/135008
Do not return a random value from the stack as the version on error.
Clean up some style issues and consolidate some duplicate code.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While the main blkid functionality is in util-linux, there is still
use for blkid on non-Linux platforms.
Fix the ZFS device detection by looking at multiple uberblocks to
see if any are present, rather than looking for the ZFS boot block
which is not always present.
There are slots for up to 128 uberblocks, but the first 4 are not
written to disk on a newly-formatted filesystem, so check several
of them at different offsets within the uberblock array.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch add EXT4_PROJINHERIT_FL to enable inherit feature for
project ID. If an directory has its inherit flag set, all its
newly created children will inherit its project ID. Conversely,
new inodes will get a default project ID (i.e. zero). Also, no
hard link or rename is permitted if the directory and child has
different project ID.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds project quota support. An new quota type PRJQUOTA(2)
is added. EXT4_PRJ_QUOTA_INO(11) is reserved for project quota inode.
The super block reservers an field s_prj_quota_inum for saving
project quota inode. And each inode adds an internal field i_projid
for saving its project ID.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch add project feature flag EXT4_FEATURE_RO_COMPAT_PROJECT.
Project feature is a read-only compat feature. Thus, an ext4 file
system with project feature enabled could only be read by ext4
kernel module without project feature support.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Project quota related fields are reserved in Linux kernel.
As a preparation for it, this patch cleans up quota codes
of e2fsprogs so as to make it easier to add new quota type(s).
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
FreeBSD 10.2 will blow up compiling its own header files in sys/file.h
if _XOPEN_SOURCE is defined.
In file included from tdb.c:59:
/usr/include/sys/file.h:209:2: error: unknown type name 'u_int'
u_int xf_flag; /* flags (see fcntl.h) */
^
1 error generated.
This is despite the fact that POSIX.1 requires comforming applications
to define _XOPEN_SOURCE (to different numbers depending on the version
of POSIX.1 the program is expecting to work against). See section
2.2.1 in POSIX.1 for chapter and verse.
Work around this by removing the _XOPEN_SOURCE declaration. This will
cause compiler warnings (and will cause builds against some versions
of Solaris to break), so only do this for FreeBSD.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext2fs_punch() was called with "end = ~0ULL" to indicate truncate
to the end of file it tried to compute "count" for ext2fs_punch_ind()
based on "start" and "end", but incorrectly passed "count = ~0U" even
when "start" was non-zero, causing an overflow in some cases.
The calling convention for ext2fs_punch_ind() was also gratuitously
different from ext2fs_punch() and ext2fs_punch_extent(), passing
"count" instead of "end" as the last parameter. Fix this by passing
it "end" like the other functions, and handle "count" internally.
Add checks to ext2fs_punch_ind() if "end" is at or beyond the 2^32
indirect block limit so the 32-bit internal variables don't overflow.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The test2[] array is not 0-terminated and the create_test_list() for
loop does not terminate properly at the end of this array, but
continues until it hits the 0 at the end of test3[].
Reported-by: Hanno Boeck <hanno@hboeck.de>
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=104311
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This code is partially derived from patches from David Turner to allow
debugfs to properly support extended timestamps.
Cc: David Turner <novalis@novalis.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext2fs_extent_set_bmap() and ext2fs_punch_extent(), fix the parents
when altering either end of an extent so that the parent nodes reflect
the added mapping.
There's a slight complication to using fix_parents: if there are two
mappings to an lblk in the tree, the value of handle->path->curr can
point to either extent afterwards), which is documented in a comment.
Some additional color commentary from Darrick:
In the _set_bmap() case, I noticed that the "remapping last block in
extent" case would produce symptoms if we are trying to remap a
block from "extent" to "next_extent", and the two extents are
pointed to by different index nodes. _extent_replace(...,
next_extent) updates e_lblk in the leaf extent, but because there's
no _extent_fix_parents() call, the index nodes never get updated.
In the _punch_extent() case, we conclude that we need to split an
extent into two pieces since we're punching out the middle. If the
extent is the last extent in the block, the second extent will be
inserted into a new leaf node block. Without _fix_parents(), the
index node doesn't seem to get updated.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If during formatting we'd lose more than 75% a block group to group
descriptors and other metadata, enable the meta_bg feature. This
enables us to create >500T filesystems with default options.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When meta_bg is enabled at mkfs time, we put at most one group
descriptor block in each blockgroup. Unfortunately, the calculation
of max overhead per bg doesn't know this, so mkfs fails when it isn't
strictly necessary. Fix it, since Dave reported that he couldn't
create a 500TB ext4 filesystem.
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there are directory entries with file names which are less than 16
bytes, it turns out that passing less than the crypto block size to
the kernel's crypto layer will cause the kernel to crash.
However, since there never should be encrypted directory entries where
the file name is less than 16 bytes (the AES block size), change
e2fsck to offer to address this corruption by deleting the directory
entry.
(We need to checks for this condition into the kernel as well.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Also change ext2fs_symlink() so that the target parameter is a const
char *, thus promising that we will never change the incoming string.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The quota code required that we included dict.o in libsupport.a, so we
might as well just move dict.c and dict.h to lib/support, and then
have e2fsck use the version of dict.c in libsupport.a. This
simplifies the build system and eliminates having two identical copies
of dict.o floating around in the build tree.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check_plausibility() function is now used all over the place, so
we should move the plausible.c file to lib/support and remove the
special case handling for that file that had been in the build system.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The profile functions started as something specific to e2fsck. It's
now used by mke2fs and e2fsck, so it's better to move it into
libsupport.a.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We will be using libsupport.a for e2fsprogs's internal support
functions. It will contain the quota support functions, but we will
also be moving code such as profile.c and plausible.c to libsupport.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For the 1.43 release, quota support will be the default. It's much
simpler if we don't try to make quota support optional. This was done
originally because the quota feature wasn't fully tested. It is now,
so we can remove this as an option.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The presence of --disable-htree is very much a legacy thing. Remove
it since supporting the lack of htree support is pretty silly.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There were some generated files that weren't getting removed by the
clean and distclean targets; fix this.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some newer versions of autoconf kvetch if we are still using
configure.in. As of this writing the only version of autoconf which I
support is autoconf 2.69, and if you try to recreate the configure
script which is shipped with e2fsprogs, and it breaks, you get to keep
both pieces.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Diet libc doesn't support syscall correctly, but it does have
add_key() and keyctl() in libc (although glibc does not). So change
e4crypt to use add_key() and keyctl() directly if they are available.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove all flushes of the undo file except for the one that happens just
prior to the file being closed; it seems that the arbitrary flushes
aren't sufficiently useful.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is the initial implementation of a FUSE server based on
e2fsprogs. The point of this program is to enable ext4 to run on any
OS that FUSE supports (and doesn't already have a native driver), such
as MacOS X, BSDs, and Windows. The code requires FUSE API v28, which
is available in Linux fuse and osxfuse releases that are available as
of August 2013.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the new fallocate API for creating the journal and the mk_hugefile
feature.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create a library function to perform fallocation on arbitrary files.
This is a bit more intense than Ted's original mk_hugefiles
implementation since we have to honor any blocks that may already be
allocated to the file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a new get_alloc_blocks hook and a block_alloc_stats_range hook so
that e2fsck can capture allocation requests spanning more than a
block to its block_found_map.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>