Enhance debugfs to be able to display and modify extended attributes, and
create some simple tests for the extended attribute editing functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add magic number checking to the extended attribute editing handle;
move inline data to the head of the attribute list when writing so
that inline data ends up in the inode area; and always zero the
attribute space before writing to ensure that we can delete the last
xattr.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since create_inode.c is shared between debugfs and mke2fs, don't
spread debugfs internal state into mke2fs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Use the functions in misc/create_inode.c, and remove the duplicated
code.
* The CREATE_INODE_DEPS in the debugfs/Makefile.in is used for recording
create_inode.o's depends which is from misc/Makefile.in, we have to
recompile create_inode.o because we need it to print more messages when
it is used by debugfs, just like we recompile e2freefrag.o, but it seems
that the e2freefrag.o's depends in debugfs/Makefile.in is incorrect, it
would not rebuild when its depends (e.g.: lib/config.h) is changed,
which would cause unexpected errors. Make duplicated code in
debugfs/Makefile.in and misc/Makefile.in is not a good idea, maybe we'd
better define CREATE_INODE_DEPS in the top Makefile, I'd like to send
another patch and fix the e2freefrag if you are fine with it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext2fs_file_read/write are used to copy data from/to a file.
But they manipulate data by blocksize. For supporting inline data, we
handle it in two new fucntions called ext2fs_file_read/write_inline_data.
In read path the implementation is straightforward. But in write path
things get more complicated because if the size of data is greater than
the maximum size of inline data we will expand this file. So now we
will check this in ext2fs_inline_data_set. If this inode doesn't have
enough space, it will return EXT2_ET_INLINE_DATA_NO_SPACE error. Then
the caller will check this error and tries to expand the file.
The following commands in debugfs can handle inline_data feature after
applying this patch:
- dump
- cat
- rdump
- write
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After checking inline data in ext2fs_inode_have_valid_blocks2() we won't
traverse the block in do_lsdel() function. But if an inode has inline
data we also need to report it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If there is an inode with inline data, we just print the size of inline
data in stat command.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After applied this commit (a7f4c635), we have banned to traverse blocks
for an inode which has inline data because no block belongs to it. But
before calling this function, we need to check inline data flag. This
commit add a sanity check ext2fs_inode_has_valid_blocks2() to fix them
except that ext2fs_expand_dir because it will be fixed by another patch.
Meanwhile in this commit it fixes a bug that when we kill a file we
could leak an inode.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the new extended attribute APIs to display all extended attributes
(current code does not look in the EA block) and display full names
(current code ignores name index too).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
To check the coverage of e2fsprogs's regression test, do the
following:
configure --enable-gcov
make -j8 ; make -j8 check ; make coverage.txt
The coverage information will be the coverage.txt and *.gcov files in
the build directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In practice, it is **extremely** rare for users to try to use more
than the first backup superblock located at the beginning of block
group #1. (i.e., at block number 32768 for file systems with a 4k
block size). This new compat feature restricts the backup superblock
to block group #1 and the last block group in the file system.
Aside from reducing the overhead of the file system by a small number
of blocks, by eliminating the rest of the backup superblocks, it
allows us to have a much more flexible metadata layout. For example,
we can force all of the allocation bitmaps and inode table blocks to
the beginning of the disk, which allows most of the disk to be
exclusively used for contiguous data blocks.
This simplifies taking advantage of certain HDD specific features,
such as Shingled Magnetic Recording (aka Shingled Drives), and the
TCG's OPAL Storage Specification where having a simple mapping between
LBA block ranges and the data blocks used by the file system can make
life much simpler.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The dietlibc doesn't support the TZ environment variable, which is
required by the standard. Work around this so that we can run the
regression test suite when building with dietlibc. (This is useful
for finding problems.)
With this change, the only thing which doesn't work as far as dietlibc
is concerned is the posix_memalign test, and the MMP support tests
(because posix_memalign isn't provided by dietlibc, sigh.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Newer versions of autoconf pull in AC_PROG_GCC as part of
AC_CANONICAL_HOST. So we need check for WITH_DIET_LIBC earlier in
configure.in.
Also, e2fsprogs now needs functions which are found in diet libc's
compat library. So add support for autoconf's LIBS function, and
automatically set libs to include -lcompat.
Finally, disable compiling e4defrag by deault if --with-diet-libc is
specified because the program has too many glibc dependencies.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The read_journal_block() function was needlessly complicated, which
made it harder to read/maintain, and it also tripped up Coverity.
Cleaning it up also avoided some signed/unsigned casts, and allows us
to avoid passing got back to the caller, since it wasn't needed.
Addresses-Coverity-Bug: #709539
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In response to reviewer comments, commit fe56188b07 included changes
that modified some of the code used to output error messages when
checking user-supplied block numbers. These changes converted calls
to parse_ulonglong() to calls to strtoblk(). Because strtoblk() calls
parse_ulonglong(), and both output error messages, two redundant and
relatively generic messages were output on each error.
Fix this by removing the error message output from strtoblk(), and
extending it to accept an optional error message argument that it
supplies in lieu of a default to parse_ulonglong(). Also, revert to
the more descriptive original error messages with mods per reviewer
comments, and fix an error message in do_replace_node().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit a17e9f30 set up the extent header for a new file.
Unfortunately it didn't correctly handle byte swapping; fix this so
the regression tests pass on PowerPC systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Eric Sandeen <sandeen@redhat.com>
Commit fe56188b07 modified the code used to check the block number
argument to the command line -s switch, adding a call to com_err().
This causes a compile time warning because the third argument to
com_err() isn't a string. Also, when the block number argument is
bad it outputs an incorrect error message - "Operation not permitted".
Fix these minor problems by removing the call to com_err(). Other
code provides enough error reporting information in this case.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The s_desc_size in the superblock specifies the group descriptor
size in bytes, but in various places the EXT4_FEATURE_INCOMPAT_64BIT
flag implies that the descriptor size is EXT2_MIN_DESC_SIZE_64BIT
(64 bytes) instead of checking the actual size. In other places,
the s_desc_size field is used without checking for INCOMPAT_64BIT.
In the case of ext2fs_group_desc() the s_desc_size was being ignored,
and assumed to be sizeof(struct ext4_group_desc), which would result
in garbage for any but the first group descriptor. Similarly, in
ext2fs_group_desc_csum() and print_csum() they assumed that the
maximum group descriptor size was sizeof(struct ext4_group_desc).
Fix these functions to use the actual superblock s_desc_size if
INCOMPAT_64BIT.
Conversely, in ext2fs_swap_group_desc2() s_desc_size was used
without checking for INCOMPAT_64BIT being set.
The e2fsprogs behaviour is different than that of the kernel,
which always checks INCOMPAT_64BIT, and only uses s_desc_size to
determine the offset of group descriptors and what range of bytes
to checksum.
Allow specifying the s_desc_size field at mke2fs time with the
"-E desc_size=NNN" option. Allow a power-of-two s_desc_size
value up to s_blocksize if INCOMPAT_64BIT is specified. This
is not expected to be used by regular users at this time, so it
is not currently documented in the mke2fs usage or man page.
Add m_desc_size_128, f_desc_size_128, and f_desc_bad test cases to
verify mke2fs and e2fsck handling of larger group descriptor sizes.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mostly by adding static and removing excess extern qualifiers. Also
convert a few remaining non-ANSI function declarations to ANSI.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Clean up the formatting of the debugfs(8) man page:
- add command aliases to the main descriptions
- use bold for sub-commands and italics for their arguments
- remove trailing spaces
- add "dirty" sub-command
- clarify "block_dump" and "zap_block" sub-commands
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext2fs_free_mem() takes a pointer to a pointer, similar to
ext2fs_get_mem(). Improve the documentation, and fix debugfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The caller of dump_file provides a fd to write to, so the caller
should also dispose of the fd. Also, the fd never gets closed if
preserve=1.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
debugfs should use strtoull wrappers for reading block numbers from
the command line. "unsigned long" isn't wide enough to handle block
numbers on 32bit platforms.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We should really use the ext2fs memory allocator functions in
copy_file(), and we really should return a value if there's allocation
problems.
Also fix up a minor bogosity in an error message.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: Robert Yang <liezhi.yang@windriver.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The help text for debugfs' init_filesys command is incorrect; the
second parameter is the size of the filesystem in blocks, not the size
of an individual filesystem block. There is in fact no way to set
that parameter.
Reported-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ussage message for the open and filefrag commands were missing
options; this commit fixes this.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
commit 2ae5d1fdb8 was supposed to teach
'seti' and 'freei' to act on a range of consecutive inodes. apparently
only 'seti' has learned: 'freei' doesn't advance the ino, repeatedly
acting on the same one instead.
Signed-off-by: Lev Solomonov <solo@primarydata.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix the checking of s_mmp_block in e2fsck_pass1() and
ext2fs_mmp_read() to handle the high 32 bits of s_blocks_count.
Remove redundant check of s_mmp_block in do_dump_mmp() right before
ext2fs_mmp_read() is called.
Also fix s_blocks_count_hi in check_backup_super_block(), since it
cannot use the ext2fs_blocks_count() helper easily.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Let debugfs do sparse copy when src is a sparse file, just like
"cp --sparse=auto"
* For the:
#define IO_BUFSIZE 64*1024
this is a suggested value from gnu coreutils:
http://git.savannah.gnu.org/gitweb/?p=coreutils.git;a=blob;f=src/ioblksize.h;h=1ae93255e7d0ccf0855208c7ae5888209997bf16;hb=HEAD
* Use malloc() to allocate memory for the buffer since put 64K (or
more) on the stack seems not a good idea.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The max length of debugfs argument is 256 which is too short, the
arguments are two paths, the PATH_MAX is 4096 according to
/usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux
systems), that's also what the ss library uses.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Run sparse against source files when building e2fsprogs with 'make C=1'. If
instead C=2, it configures basic ext2 types for bitwise checking with sparse,
which can help find the (many many) spots where conversion errors are
(possibly) happening.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Darrick J. Wong