mkfsing a plain file would lead to a warning about being unable
to determine geometry; we should just skip the topology-getting
if we see that we have a regular file.
This was breaking "make check" but I had missed it since I
inadvertently stopped running the checks during the Fedora
RPM build.
Also, add a newline to the warning.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On 32-bit platforms where the file system block size is 8k or greater,
the calculation bpib*bpib*bpib* will overflow a 32-bit calculation,
leading to a divide by zero error. Fix this.
Thanks to Mikulas Patocka for pointing this out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Sorry about that, the discard ioctl doesn't actually work
unless you open the file with write capabilities...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Try calling the BLKDISCARD ioctl at mkfs time to pre-discard all blocks
on an ssd, or a thinly-provisioned storage device.
No real error checking; if it fails, it fails, and that's ok - it's
just an optimization. Also, it cannot work in conjunction with
the undo io manager, for obvious reasons.
Optionally disabled with a "-K" (mnemonic: Keep) option.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Try calling the BLKDISCARD ioctl at mkfs time to pre-discard all blocks
on an ssd, or a thinly-provisioned storage device.
No real error checking; if it fails, it fails, and that's ok - it's
just an optimization. Also, it cannot work in conjunction with
the undo io manager, for obvious reasons.
Optionally disabled with a "-K" (mnemonic: Keep) option.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Handle automatic selection of stride/stripe:
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=16 blocks, Stripe width=32 blocks
...
And warn on block device misalignment:
mke2fs 1.41.9 (22-Aug-2009)
/dev/sdc1 alignment is offset by 32256 bytes.
This may result in very poor performance, (re)-partitioning suggested.
Proceed anyway? (y,n)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This commit forces the use of the system-provided blkid or uuid header
files if we are using the system-provided blkid or uuid libraries.
This avoids using the in-tree header files with the system libraries.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
fsck leaks fds when invoked with -R -A -M -a -t noopts=nofail
Signed-off-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a more explicit description of how specifying the flex_bg file
system feature changes the layout of the per-block group metadata.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With 64-bit file systems, mke2fs can take a long time to do things
other than write inode tables. I exported the mke2fs numeric progress
meter and used it for allocating group tables and the final file
system flush.
Signed-off-by: Valerie Aurora (Henson) <vaurora@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ppc glibc seems to be missing sync_file_range, so we fell back
to the local define, and there ppc differs as well, so the
build was failing.
Thanks to Kyle for the patch w/ the tidy solution.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The feature name "extent" is documented in mke2fs.conf, although both
"extent" and "extents" are accepted by e2fsprogs.
Addreses-Debian-Bug: #540111
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When increasing inode size if we find that the new block
that we needed to increase the inode table size is a bad
block we fail. This make sure we don't end up with a corrupt
file system when doing inode resize on a file system having
bad blocks.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With file system formated for RAID arrays we can have inode bitmap
and block bitmap after inode table. Make sure we move them around
properly when doing inode resize.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This removes the metadata block bitmap and makes the error handling
simpler. It also check for the enospc with the correct number needed
blocks. Also added specific error messages. We need to run e2undo
only if we start modiyfing inode, group desc and inode table.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The extent list header gets printed before we fall back to bmap:
# filefrag -v /mnt/test/bar
Filesystem type is: 58465342
File size of /mnt/test/bar is 12288 (3 blocks, blocksize 4096)
ext logical physical expected length flags <---- HERE
Discontinuity: Block 2 is at 17 (was 16)
/mnt/test/bar: 2 extents found
so delay printing it until we know fiemap is working.
(though ideally it'd be nice to have the same verbose output
regardless of the interface we used, I think).
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The fragmentation count in the bmap case seems to be
off by one:
/mnt/test/bar: 0 extents found
Addresses-Debian-Bug: #540376
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a bug in e2freefrag where if the last free extent is at the very
end of the filesystem, it would be disregarded.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the file system has a non-zero s_first_data_block, as is the case
when the block size is 1kb, e2freefrag would incorrectly try to
reference invalid data blocks in the block allocation bitmap.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
"Free chunks" is confusing since it has nothing to do with the
chunksize; use "free extents" instead.
Also add a missing newline in an error message.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o