Also accessed via -o list, this new output format is much more
user-friendly and lists whether or not a particular device is mounted.
Addresses-Debian-Bug #490527
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The public header files depend on the the autoconf defines
WORDS_BIGENDIAN and HAVE_SYS_TYPES_H, so we add them to ext2_types.h
so that external programs which try to use ext2fs_swap*() will work
correctly on big-endian systems. Fortunately, few if any programs
need to use this libext2's byte-swap functions directly.
Addresses-Debian-Bug: #484879
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since version 2.50 autoconf fully supports checking sizes of types
(with AC_CHECK_SIZEOF) when cross-compiling. Therefore there is no
need to preset the respective cache variables anymore. The following
patch removes the special case. There is no need to adjust AC_PREREQ
as it's set to 2.50 already.
Tested successfully cross-building for the mips64el-linux-gnu host on
an i386-linux-gnu build system, removing the following warning
(because of a mismatch for the "long" type):
Sizeof(__U64__TYPEDEF) is 4 should be 8
Problem detected with asm_types.h
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
DJGPP lacks sys/select.h and sys/un.h; add header checks to be more
portable.
Signed-off-by: Christophe Grenier <grenier@cgsecurity.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some systems don't have the 'dc' command installed, and this causes
configure to print a warning message unnecessarily for a standard
(non-WIP and non-pre) release of e2fsprogs.
It's easy enough to avoid this problem, so let's do it.
Addresses-Sourceforge-Bug: #1893024
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also removed the --enable-dynamic-static configure option.
Unfortunately the usefulness of building e2fsck statically is gone on
all modern distributions, since everything else on the system is built
dynamically these days. In fact on some distributions it is almost
impossible to build programs statically any more.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Apparently Mac OS 10.5 defines fstat64(), but not ftruncate64(),
causing resize2fs to fail to build. So check explicitly for
ftruncate64(), and fall back to ftruncate() if necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the user specifies as arguments to configure --bindir, --sbindir,
--libdir, or --sysconfdir, then set corresponding $root_FOO variable,
so that the request from the user to set a specific --sbindir is
honored.
Addresses-Sourceforge-Bug: 498381
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fedora and Red Hat puts the devmapper library in different locations
compared to Debian, so we use pkg-config. Unfortunately Debian's
devmapper.pc file is buggy (See Debian Bug #390243), so we have to
work around it.
Historically, e2fsprogs has tried not to depend on pkg-config, since
its answers are so often **wrong** (the Debian bug has been ignored
for over a year), so I'm hoping I'm not going to regret this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When compiling with dietlibc, sys/syscall.h isn't supported; as of
dietlibc 0.30, it exists but it references a non-existent asm/unistd.h
header file. So we have to test for its existence and avoid using it
in lib/uuid/gen_uuid.c if it is not supported.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a configure option which causes the uuidd helper daemon not to be
built or used by the uuid library.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also store the clock sequence information in a state file in
/var/lib/misc/uuid-clock so that if the time goes backwards the clock
sequence counter can get bumped. This allows us to completely
correctly generate time-based (version 1) UUID's according to the
algorithm specified RFC 4122.
Addresses-Sourceforge-Bug: #1529672
Addresses-Red-Hat-Bugzilla: #233471
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a potential security problem if e2fsprogs is built as root (as
Gentoo does!). In addition fix the script and how it is called from
the configure script so that it does the right thing when
cross-compiling.
Fixes-Gentoo-bug: #146903
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fixed version number generation so that the same common
algorithm is used for Debian and RPM version numbering schemes.
This allows the RPM spec file to do the right thing for WIP releases.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add in randomness based on Linux's thread id (gettid) to avoid race
conditions when two threads try to generate uuid's at the same time.
This shouldn't be an issue if /dev/urandom has proper locking and is
present, so this is just a failsafe.
Addresses SourceForge Bug: #1529672
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This caused FTBFS bugs on AMD64 platforms, since it uses a different
64-bit type when compared with IA64, so we need to make our
autoconfiguration system more intelligent.
Addresses Debian Bugs: #360661, #360317
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On systems where is multi-path storage device is problem with duplicated
filesystems. The solution is select "the best" device. This is possible
by device-mapper library.
Short quotation from RH bugzilla:
With my patch, all dm devices remains in libblkid cache.
Only the top level dm devices are given high priority
and more appropriate node names (i.e. /dev/mapper/*) are used.
For example, if we have linear mapped dm device "ov1" over
dm device "disk1p3" which is multipath mapped to /dev/sdd3 and /dev/sdh3:
# dmsetup.static ls --tree
ov1 (253:5) <-- /dev/mapper/ov1 or /dev/dm-5
`-disk1p3 (253:4) <-- /dev/mapper/disk1p3 or /dev/dm-4
`-disk1 (253:0)
|- (8:112) <-- /dev/sdh
`- (8:48) <-- /dev/sdd
Original version of blkid will show:
# ./orig/blkid -t LABEL=mpdisk1p3 -l
/dev/sdd3: LABEL="mpdisk1p3" ... TYPE="ext3"
With my patch, blkid will show:
# ./deptree/blkid -t LABEL=mpdisk1p3 -l
/dev/mapper/ov1: LABEL="mpdisk1p3" ... TYPE="ext3"
In blkid cache, all devices are listed:
# ./orig/blkid -t LABEL=mpdisk1p3
/dev/sdd3: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/sdh3: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/dm-4: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/dm-5: LABEL="mpdisk1p3" ... TYPE="ext3"
# ./deptree/blkid -t LABEL=mpdisk1p3
/dev/mapper/ov1: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/sdd3: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/sdh3: LABEL="mpdisk1p3" ... TYPE="ext3"
/dev/dm-4: LABEL="mpdisk1p3" ... TYPE="ext3"
For more details see discussion on:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=156324
Addresses Red Hat Bug: #156324
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use BUILD_CCFLAGS and BUILD_LDFLAGS instead of CCFLAGS and LDFLAGS in
the build system when building files in the util directory which are
needed during the build process. This avoids potential problems when
cross-compiling some of the options are not recognized as valid by the
host compiler. (Addresses Sourceforge Bug #1261547)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
target is a regular file, instead of doing binary searching. It also
fixes a couple of cases where a file descriptor is leaked in the
ext2fs_getsize() routine on error.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
environment variables if the libraries are called from setuid or setguid
programs, or if kernel believes that the process is not eligible to create
a core dump. In addition, if the libc has __secure_getenv(), use it so that
the libc can also do any additional limitations regarding when libraries can
trust environment variables (i.e., to integrate with systems like SELinux
and Posix capabilities).
than the GCC 3.4 compile code and triggers compiler warnings on
sparc64. Thanks to Matthias Andree for his analysis and suggestions.
(Addresses Debian Bug #232326)
Remove support for the --enable-old-bitops configure option which
was only for very old sparc systems.
llseek, lseek64, sockaddr.sa_len and make the lseek checks
immune to compiler warnings, so that they can be compiled
with Intel C++ 8.1.
Patch from: Matthias Andree <matthias.andree@gmx.de>
autoconf 2.13 version of AC_CHECK_TYPE. Otherwise, on some platforms
intptr_t might get erroneously #define'd to be long. (Addresses
Debian Bug #289133)
e2initrd_helper, which obviates the need for using /bin/awk
and mounting/unmounting the root filesystem during the initrd
process. (Addresses Debian Bug #247775)
and lib/ext2fs/getsize.c
In lib/blkid/getsize.c, include <sys/disk.h> if present since
this is where the DIOCGMEDIASIZE ioctl is defined on FreeBSD.
(Addresses Debian Bug #264630)
test to honor the -c option (number of blocks at a time).
do_read and do_write will try to turn on the O_DIRECT flag
if it appears that it is possible to use it. (Addresses
Debian bug #198006)
tune2fs to use the test I/O manager.
The test I/O manager has been changed to not do anything extra by
default, unless the TEST_IO_FLAGS and/or TEST_IO_BLOCK environment
variables are set, which controls what I/O operations are logged and
a block number to watch, respectively. The log messages are sent to
stderr by default, unless a filename is specified via the
TEST_IO_LOGFILE environment variable.
Disable certain tests that depend on the byteswapping functions
being present so that "make check" succeeds even if --disable-swapfs
is passed to the configure script.
The iterate_on_dir function in libe2p has been changed to be more
general, so it relies less on the layout of struct dirent. We also
make sure the errno returned by the ioctl is returned by
fgetversion() and fsetversion().
that it will compile on modern systems. The top-level makefile does not recurse
into the ext2ed directory for now, pending determination of whether the original
author is still maintaining ext2ed.
The documentation files have been renamed to remove the version from the filename.
In addition, the SGML files have been converted from LinuxDoc to DocBook.
The way root_bindir, root_sbindir, and root_libdir have been changed so that
if root_prefix is not set, the values set by the configure command-line options to
set the directory names using --bindir, --sbindir, --libdir will affect the
root_bindir, et.al Makefile variables.
configure.in: Add --disable-resizer, --disable-imager, and
--disable-debugfs switches, which allow people who are building boot
floppies to build a very restricted e2fsprogs distribution. Note:
these functions limit the functions in the shared library, so beware!
Makefile.in, ChangeLog:
Makefile.in: Don't recurse into debugfs and resize subdirectory if
--disable-debugfs or --disable-resizer is given as a configuration
option.
ChangeLog, Makefile.in:
Makefile.in: Don't build e2image if --disable-imager is specified to
configure.
configure.in: Add new switch, --disable-swapfs which disables support
of byte-swapping old filesystems. Add new test, AC_C_BIGENDIAN, which
sets WORDS_BIGENDIAN on big-endian machines. Change handling of
--with-ccopts so that if set, the default CFLAGS is suppressed.
Theodore Ts'o