Commit c8ee0d60 fixed most of these, but missed this one.
# e2image -r -p <device> - > imagefile
leads to a corrupted image due to the "Scanning inodes..."
printf going to stdout.
Reported-by: Alex Markley <alex@malexmedia.net>
Addresses-Red-Hat-Bugzilla: #1327329
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Configure the io channel with the specified offset before
calling mke2fs_discard_device(). Otherwise the data before offset
is discarded.
Signed-off-by: Marcus Huewe <suse-tux@gmx.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Glibc has depcreated _SVID_SOURCE and _BSD_SOURCE in favor of
_DEFAULT_SOURCE. So define _DEFAULT_SOURCE to shut up glibc 2.20
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Most libraries use the "-host" suffix when building for the host. This
patch renames all the libraries to use -host instead of _host.
Addresses-Google-Bug: #24619596
TEST=make dist
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When adding 'libext2fs' as a library dependency from any other binary,
the binary needs to find the library headers. Users of this library
should not hard-code the include path themselves. This patch exports the
library headers on all three version of the libext2fs library and
removes the redundant include path from executables in e2fsprogs.
Addresses-Google-Bug: #23084776
TEST=mma
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use libfuse's command line parsing, which is much more powerful and
flexible than what we had before, and to allow the user to have more
fine-grained control over FUSE's run-time options.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the journal needs to be recovered to avoid clobbering whatever
changes tune2fs makes, do so.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Give admins a short amount of time to confirm that they want to
proceed with a dangerous operation. Refuse to perform the op
unless the filesystem is freshly checked.
Cc: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, filefrag's "expected physical block" column expects extent
records to be physically adjacent regardless of the amount of logical
block space between the two records. This means that if we punch a
hole in a file, we get reports like this:
ext: logical_offset: physical_offset: length: expected: flags:
4: 4096.. 8343: 57376.. 61623: 4248:
5: 8345.. 10313: 61625.. 63593: 1969: 61624:
Notice how it expects 8345 to map to 61624, and scores this against
the fragmentation of the file. Flagging this as "unexpected" is
incorrect because the gap in the logical mapping is exactly the same
size as the gap in the physical extents.
Furthermore, this particular mapping leaves the door open to the
optimal mapping -- if a write to block 8344 causes it to be mapped to
61624, the entire range 4096-10313 can be mapped with a single extent.
Until that happens, there's no way to combine extents 4 and 5 because
of the gap in the logical mapping at block 8344.
Therefore, tweak the extent report to account for holes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Allow users to turn on metadata_csum_seed at format time so that UUIDs
can be live-changed at any time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Chattr and lsattr can be used to set or get project ID:
chattr -p <project id> file
lsattr -p file
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If s_mkfs_time is not set in the superblock, print the s_mtime field
instead to identify the different superblocks. This can happen if the
superblock is corrupted, since s_mkfs_time is not reset by e2fsck.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The EXT2_GETVERSION ioctl is defined to take a "long" parameter, but
fgetversion() calls ioctl() with an "int" parameter instead. This is
handled in the kernel correctly, but the generation is sign-extended
in fgetversion() before return on 64-bit systems and lsattr prints
it as a huge positive number for inode generation above 0x80000000:
1635574212 -------------e-- /mnt/ost0/O/0/d0/12928
18446744073045131735 -------------e-- /mnt/ost0/O/0/d0/166240
782808861 -------------e-- /mnt/ost0/O/0/d0/31744
18446744072181134840 -------------e-- /mnt/ost0/O/0/d0/135008
Correctly assign the returned generation number as an unsigned value,
and print it with a 10-character field width. The version is printed
left-aligned for consistency with the old code and to ensure it is
always printed in the first column for use with tools like "cut":
1635574212 -------------e-- /mnt/ost0/O/0/d0/12928
3630547415 -------------e-- /mnt/ost0/O/0/d0/166240
782808861 -------------e-- /mnt/ost0/O/0/d0/31744
2766550520 -------------e-- /mnt/ost0/O/0/d0/135008
Do not return a random value from the stack as the version on error.
Clean up some style issues and consolidate some duplicate code.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix compile warnings for missing declarations on the maint branch.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch add EXT4_PROJINHERIT_FL to enable inherit feature for
project ID. If an directory has its inherit flag set, all its
newly created children will inherit its project ID. Conversely,
new inodes will get a default project ID (i.e. zero). Also, no
hard link or rename is permitted if the directory and child has
different project ID.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds project quota support. An new quota type PRJQUOTA(2)
is added. EXT4_PRJ_QUOTA_INO(11) is reserved for project quota inode.
The super block reservers an field s_prj_quota_inum for saving
project quota inode. And each inode adds an internal field i_projid
for saving its project ID.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch add project feature flag EXT4_FEATURE_RO_COMPAT_PROJECT.
Project feature is a read-only compat feature. Thus, an ext4 file
system with project feature enabled could only be read by ext4
kernel module without project feature support.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Project quota related fields are reserved in Linux kernel.
As a preparation for it, this patch cleans up quota codes
of e2fsprogs so as to make it easier to add new quota type(s).
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This fixes a number of incompatibilities which caused maint branch to
fail to build on on FreeBSD. Also fix the Makefile in the tests
directory so that "make -jN check" works correctly on FreeBSD.
Previously the Makefile in the tests directory used a construct which
was specific to GNU Make, which which silently expanded to an empty
list, which caused "make check" to be a no-op when running using BSD's
pmake. This Makefile has been changed to use the != macro assignment
syntax which is common to GNU make and BSD pmake. It's technically
not completely portable (it will not be recognized by Solaris's ccs
make, for example), but most other operating systems ship GNU make
(Solaris, AIX), or BSD pmake (*BSD, Mac OS) as either the primary or
alternative make utility that this should an acceptable compromise,
since it makes running all of tests using something like "make -j8
check" or "make -j16 check" run *much* faster.
There are still some caveats if using BSD pmake; in particular, if the
configure script is run on a system which has GNU make (installed as
gmake on FreeBSD for example), the configure script will find it, and
enable some GNU make features in the Makefile, and the generated
makefiles *must* be built using gmake. However, if isolated build
jail / chroot is used which only has pmake, the Makefiles should now
work with pmake.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move the mke2fs "-d" option to be alphabetical like other options.
Rename "root_dir" to "src_root_dir" to avoid confusion with the
actual root inode in the new filesystem.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When creating a file in op_create, set the file's uid and gid to the
user's uid and gid. Do the same in op_mknod.
Reported-by: Lennart Lövstrand <lennart@lovstrand.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Running tune2fs on a filesystem with an unrecovered journal can
cause the tune2fs settings changes in the superblock to be reverted
when the journal is replayed if it contains an uncommitted copy of
the superblock. Print a warning if this is detected so that the
user isn't surprised if it happens.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Updated message printed to include steps to replay journal.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are times when it is necessary to update the UUID on a mounted
root file system (for example). So when we add this this safety check
to e2fsprogs 1.43, we will likely break some scripts. Allow the -f
option to force an override of this safety check.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The posix_fadvise() to hint to the system that the file can be removed
from memory will probably not work well without the sync_file_range(2)
call, but e4defrag should still fundamentally work, and this will
allow e4defrag to compile if the C library doesn't happen this system
call exposed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Also change ext2fs_symlink() so that the target parameter is a const
char *, thus promising that we will never change the incoming string.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We are using __func__ without any backup definition in the rest of
e2fsprogs, and this is causing warnings in the Android build, so just
remove it.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The quota code required that we included dict.o in libsupport.a, so we
might as well just move dict.c and dict.h to lib/support, and then
have e2fsck use the version of dict.c in libsupport.a. This
simplifies the build system and eliminates having two identical copies
of dict.o floating around in the build tree.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check_plausibility() function is now used all over the place, so
we should move the plausible.c file to lib/support and remove the
special case handling for that file that had been in the build system.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Theodore Ts'o