ext2fs.h now calls open() so it should include the headers needed
for this system call as well.
Addresses-Red-Hat-Bugzilla: #742147
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix several minor errors in structure definitions, the byteswap code,
and Makefiles that result from merging the crc32c and initial parts of
the metadata checksumming patchset.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Multi-mount protection is feature that allows mke2fs, e2fsck, and
others to detect if the filesystem is mounted on a remote node (on
SAN disks) and avoid corrupting the filesystem. For e2fsprogs this
means that it checks the MMP block to see if the filesystem is in use,
and marks the filesystem busy while e2fsck is running on the system.
This is useful on SAN disks that are shared between high-availability
servers, or accessible by multiple nodes that aren't in HA pairs. MMP
isn't intended to serve as a primary HA exclusion mechanism, but as a
failsafe to protect against user, software, or hardware errors.
There is no requirement that e2fsck updates the MMP block at regular
intervals, but e2fsck does this occasionally to provide useful
information to the sysadmin in case of a detected conflict.
For the kernel (since Linux 3.0) MMP adds a "heartbeat" mechanism to
periodically write to disk (every few seconds by default) to notify
other nodes that the filesystem is still in use and unsafe to modify.
Originally-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Several compiler errors are quieted:
- zero-length gnu_printf format string
- unused variable
- uninitalized variable (though it isn't actually used for anything)
- fixed a bug in ext2fs_stat() if stat64() does not exist
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds new APIs: ext2fs_flush2 and ext2fs_close2 which take an
extra 'int flags' parameter.
This allows us to pass in an EXT2_FLAG_FLUSH_NO_SYNC flag which avoids
fsync'ing the filesystem when closing it. For the case we have in
mind where we are just constructing a throwaway ext2 filesystem in a
file in order to boot a VM, this saves over 5 seconds during the boot
process and avoids many unnecessary disk writes.
Existing code using ext2fs_flush and ext2fs_close remains unaffected
by this change.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Code to count the number of blocks in the last partial
group is cut and pasted around the e2fsprogs codebase
a few times.
Making this a helper function should improve matters.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In many places we are using #ifdef HAVE_OPEN64 to determine if we can
use open64() but that's ugly. This commit creates two new helpers
ext2fs_open_file() for open() and ext2fs_stat() for stat(). Also we need
new typedef ext2fs_struct_stat for struct stat.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a slicing-by-8 CRC32c implementation for metadata checksumming.
Adapted from Bob Pearson's kernel patch.
Also added a self-test mechanism so we can verify that the crc32c
implementation is working correctly.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The dump program relies on fs->frag_size and the
EXT2_FRAGS_PER_BLOCK() macro. Kind of silly for it to do so, but it's
part of the kludgy way the dump program (which was originally written
for the BSD FFS was ported over to support ext2/3.) Given how it
makes assumptions about the ext2/3/4 file system being similar to the
BSD FFS, it's a bit of a miracle it works for ext4 --- or at least
appears to work...
Addresses-Debian-Bug: #636418
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the ability to skip zeroing journal blocks on disk. This can
significantly speed up mke2fs with large journals. At worst the
uninitialized journal is only a very short-term risk (if at all),
because the journal will be overwritten on any new filesystem as
soon as any significant amount of data is written to disk, and
the new journal TID would need to match the offset/TID of an old
commit block still left on disk.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The write_journal_inode() code is only setting the low 32-bit i_size
for the journal size, even though it is possible to specify a journal
up to 10M blocks in size. Trying to create a journal larger than 2GB
will succeed, but an immediate e2fsck would fail. Store i_size_high
for the journal inode when creating it, and load it upon access.
Use s_jnl_blocks[15] to store the journal i_size_high backup. This
field is currently unused, as EXT2_N_BLOCKS is 15, so it is using
s_jnl_blocks[0..14], and i_size is in s_jnl_blocks[16].
Rename the "size" argument "num_blocks" for the journal creation functions
to clarify this parameter is in units of filesystem blocks and not bytes.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Older distros do not define posix_memalign() by default in the
headers. If ext2fs.h is included early in the headers, it is
possible to "#define _XOPEN_SOURCE 600" so that the stdlib.h
header will define it, but if ext2fs.h is included after stdlib.h
there is no posix_memalign() declaration.
Add a posix_memalign() declaration if stdlib.h didn't do it. This
is a bit of a hack for GNU headers, but it works on Linux and OS/X
without problems.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch makes the following changes:
* ext2fs_allocate_block_bitmap() now allocates a bitmap with cluster
granularity for bigalloc file systems. For mke2fs and e2fsck, a
newly added function, ext2fs_allocate_subcluster_bitmap() allocates
a bitmap with block granularity (even for bigalloc file systems).
The newly added function ext2fs_get_bitmap_granularity() will return
the number of bits (log2) of the granularity used by the bitmap.
* The ext2fs_{mark,unmark,test}_block_bitmap2() functions will shift
their passed-in argument by log2(cluster_ganularity) bits right.
This means that the arguments for the single-argument bitmap
functions will be interpreted with block granluarity, since this
minimizes code changes in the rest of the code base.
* The ext2fs_{get,set}_block_bitmap_range() functions will interpret
their arguments in cluster granularity. This is a bit inconsistent,
but the caller of those functions will need to be taught about the
subtleties of clusters for bigalloc file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The log2 of the ratio of cluster size to block size is far more useful
than just storing the cluster size. So make this change, and then
define basic utility macros: EXT2FS_CLUSTER_RATIO(),
EXT2FS_CLUSTER_MASK(), EXT2FS_B2C(), EXT2FS_C2B(), and
EXT2FS_NUM_B2C().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add functions ext2fs_get_memzero() which will malloc() the memory
using ext2fs_get_mem(), but it will zero the allocated memory afterwards
with memset().
Add function ext2fs_get_arrayzero() which will use calloc() for
allocating and zero-out the array.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds the superblock fields needed so that dumpe2fs works and the
code points and renames the superblock fields from describing
fragments to clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The development branch of e2fsprogs already has a code point assigned
in conflict with EXT2_FLAG_DIRECT_IO. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds the basic support for Direct I/O to unix_io.c, and adds a
new flag EXT_FLAG_DIRECT_IO which can be passed to ext2fs_open() or
ext2fs_open2() to request Direct I/O support.
Note that device mapper devices in Linux don't support Direct I/O, and
in some circumstances using Direct I/O can actually make performance
*worse*!
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds a 64-bit interface for ext2fs_file_size_size() and enhances
it to trunate the file if necessary.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds a very simple function:
struct ext2_inode *ext2fs_file_get_inode(ext2_file_t file);
which is useful for fuse-ext2 when it needs to read the inode of an
open file.
Signed-off-by: renzo davoli <renzo@cs.unibo.it>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To prevent direct array indexing of fs->group_desc[i] (because the
group_desc may be a different size for different filesystems) make it
an opaque pointer that may only be accessed through the accessor
functions in blknum.c. The type itself is still available in a public
header; if we have a group_desc that we know is one type or another,
it's ok to access its fields directly. This change only prevents us
from indexing off fs->group_desc[i] directly.
Old-style applications who don't want to change their source code can
(as a temporary short-term hack) #define EXT2FS_OLD_32_COMPAT before
including ext2fs.h.
Change the accessors in blknum.c to use ext4fs_group_desc(), a version
of ext2fs_group_desc() which returns a ext4_group_desc pointer.
This simplifies and collapses a fair bit of code in blknum.c
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use 64-bit interfaces in mke2fs. This should be most most of whats
needed to support creating a 64-bit filesystem.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some devices, notably 4k sector drives, may have a 512 logical
sector size, mapped onto a 4k physical sector size.
When mke2fs is ratcheting down the blocksize for small filesystems,
or when a blocksize is specified on the commandline, we should not
willingly go below the physical sector size of the device.
When a blocksize is specified, we -must- not go below
the logical sector size of the device.
Add a new library function, ext2fs_get_device_phys_sectsize()
to get the physical sector size if possible, and adjust the
logic in mke2fs to enforce the above rules.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With 64-bit file systems, mke2fs can take a long time to do things
other than write inode tables. I exported the mke2fs numeric progress
meter and used it for allocating group tables and the final file
system flush.
Signed-off-by: Valerie Aurora (Henson) <vaurora@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Several routines in lib/ext2fs/blknum.c:
ext2fs_bg_free_blocks_count()
ext2fs_bg_free_inodes_count()
ext2fs_bg_used_dirs_count()
ext2fs_bg_itable_unused()
and their _set() counterparts, operate as if they are dealing with
blk64_t quantities, but they should be dealing with __u32 counts
instead.
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Initial design was done by Theodore Ts'o; implementation was fleshed
out by Valerie Aurora Henson. Also includes some fixes from Nick Dokos.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Previously e2fsprogs interpreted 0 for a rec_len of 65536 (which could
occur if the directory block is completely empty in 64k blocksize
filesystems), while the kernel interpreted 65535 to mean 65536. The
kernel will accept both to mean 65536, and encodes 65535 to be 65536.
This commit changes e2fsprogs to match.
We add the encoding agreed upon for 128k and 256k filesystems, but we
don't enable support for these larger block sizes, since they haven't
been fully tested.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Added 64-bit mkjournal.c interface. Needed to zero inode tables.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add new ext2fs_descriptor_block_loc2() routine that takes blk64_t as
an input.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add new ext2fs_super_and_bgd_loc2() that returns blk64_t pointers.
The function now returns the number of blocks used by super block and
group descriptors since with flex_bg, it can no longer be assumed that
bitmaps and inode tables still resided within the block group.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Eric Sandeen