Now that we have multiple backend implementations of the bitmap code,
this commit teaches e2fsck to use either the most appropriate backend
for each use case.
Since we don't know for sure if we will get it all right, the default
choices can be overridden via e2fsck.conf. The various definitions
are shown here, with the current defaults (which may change as we add
more bitmap implementations and as learn what works better).
; EXT2FS_BAMP64_BITARRAY is 1
; EXT2FS_BMAP64_RBTREE is 2
; EXT2FS_BMAP64_AUTODIR is 3
[bitmaps]
inode_used_map = 2 ; pass1
inode_dir_map = 3 ; pass1
inode_reg_map = 2 ; pass1
block_found_map = 2 ; pass1
inode_bad_map = 2 ; pass1
inode_imagic_map = 2 ; pass1
block_dup_map = 2 ; pass1
block_ea_map = 2 ; pass1
inode_link_info = 2 ; pass1
inode_dup_map = 2 ; pass1b
inode_done_map = 3 ; pass3
inode_loop_detect = 3 ; pass3
fs_bitmaps = 2
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
old_op is set but never used, because we restore "0"
not old_op. So don't bother with it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The name_len field in ext2_dir_entry is actually comprised of
the name length in the lower 8 bytes, and the filetype in the
high 8 bytes. So in places, we mask name_len with 0xFF to
get the actual length.
But once we have masked name_len with 0xFF, there is no point
in testing whether it is greater than EXT2_NAME_LEN, which
is 255 - or 0xFF. So all of these tests are extraneous.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for doing quota accounting during full
e2fsck scan if the 'quota' feature was set on the superblock.
If user-visible quota inodes are in use, they will be hidden
and converted to the reserved quota inodes.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 6267ee4 avoided repeating pass #1 over and over again if
multiple block groups are found with inodes in the bg_itable_unused
region during pass #2. This caused a regression because the problem
with not restarting pass #1 right away is that e2fsck will offer to
clear directory entries for inodes that are deleted, and e2fsck can't
easily distinguish between deleted inodes and inodes that were skipped
because of an incorrect bg_itable_unused value. So once an inode is
found in an unused region and we know that we're going to restart the
e2fsck pass, don't offer to clear any deleted inodes --- since those
will be caught in the second round.
Addresses-Google-Bug: #2642165
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In pass 2, when allocating new blocks for holes in directories, use
ext2fs_set_bmap() instead of ext2fs_block_iterate2() with a helper
function so that the newly allocated directory blocks are correctly
assigned in extent-mapped directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Remove the continue statement because it calls at the end of the loop.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously e2fsprogs interpreted 0 for a rec_len of 65536 (which could
occur if the directory block is completely empty in 64k blocksize
filesystems), while the kernel interpreted 65535 to mean 65536. The
kernel will accept both to mean 65536, and encodes 65535 to be 65536.
This commit changes e2fsprogs to match.
We add the encoding agreed upon for 128k and 256k filesystems, but we
don't enable support for these larger block sizes, since they haven't
been fully tested.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
in the case of ! defined RESOURCE_TRACK, so that we can clean up #ifdef
throughout e2fsck source.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Restart e2fsck only once in case of multiple inodes in uninit range.
Display correct inode number during BG_INO_UNINIT and INOREF_IN_USED errors.
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some of these could affect filesystems between 2^31 and 2^32-1 blocks.
Thanks to Valerie Aurora Henson for pointing out the problems in
lib/ext2fs/alloc_tables.c, which led me to do a "make gcc-wall" scan
over the source tree.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The rec_len field in the directory entry is 16 bits, so if the
filesystem is completely empty, rec_len of 0 is used to designate
65536, for the case where the directory entry takes the entire 64k
block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix error message to print the depth of a corrupt htree directory.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch has all the necesary pieces to open and fix filesystems created
with the uninit block group feature.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Turns out a "should never happen" error can indeed happen very easily
if a directory with an htree index has an incorrect, and too-large,
i_size field. This patch fixes this so that we handle this situation
gracefully, allowing filesystems with this error to be fixed.
In another patch I will clean up the specific problem which caused the
internal "should never happen" error from happening at all, but patch
will prevent e2fsck from crashing, and prompt the user to remove the
htree index, so it can be rebuilt again after pass 3.
Thanks to Bas van Schaik at Tetra for giving me access to his system
so this problem could be debugged.
Addresses-Launchpad-Bug: #129395
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Stop clearing the EXT2_FEATURE_RO_COMPAT_LARGE_FILE flag automatically
if there are no large files in the filesystem. It's been almost a
decade since there have been kernels that don't support this flag, and
e2fsck clears it quietly without telling the user why the filesystem
has been changed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Factor out code to clear a bogus inode and update e2fsck's internal
data structures accordingly into a common routine,
e2fsck_clear_inode(). This saves about 200 bytes in the compiled x86
e2fsck executable, and makes the code more maintainable in the
long-term.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck adds or deletes any of the feature bitmasks, clear
EXT2_FLAG_MASTER_SB_ONLY so the backup superblocks are updated when
e2fsck finishes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch instruments the libext2fs unix I/O manager and adds bytes
read/written and data rate to e2fsck -tt pass/overall timing output.
Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Recently, one of our customers found this message in pass2 of e2fsck
while doing some regression testing:
"Entry '4, 0x695a, 0x81ff, 0x0040, 0x8320, 0xa192, 0x0021' in ??? (136554) has
rec_len of 14200, should be 26908."
Both the displayed rec_len and the "should be" value are bogus. The
reason is that salvage_directory sets a offset beyond blocksize
leading to bogus messages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix a problem byte-swapping fast symlinks inodes that contain extended
attributes.
Addresses Red Hat Bugzilla: #232663
Addresses LTC Bugzilla: #27634
Signed-off-by: "Bryn M. Reeves" <breeves@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add better ehandler_operation() markers so it is clearer what e2fsck was
doing when an I/O error is reported.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck.conf configures a scratch_files directory which is available,
and the number of directories exceeds scratch_files.numdirs_threshold,
then try to use the tdb library to store the inode count abstraction.
This allows us to check very large filesystems without needing as much
physical memory.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the iterator abstraction and replace e2fsck_get_dir_info() with
e2fsck_dir_info_{set,get}_{parent,dotdot} so that we can support an
on-disk dirinfo implementation. This allows e2fsck to check very large
filesystems on systems with smaller amounts of memory and/or address
space.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o