Change autoconf to test for setmntent() and use that to decide whether
to use getmntent() and setmntent(), since some systems don't have
setmntent() but they do have the mntent.h header file.
Also, remove the includes of mntent.h from e2fsck and mke2fs and other
places where it is not needed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Linux <= 2.6.19 contained a bug in the /proc/swaps code where the
header would not be displayed (the first line).
This issue has been reported by Mike Frysinger for swapon(8).
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To reduce user confusion, if the /etc/mtab file is missing
ext2fs_check_mount_point and ext2fs_check_if_mounted will return a
new, explicit error code to indicate this case.
Addresses-Debian-Bug: #527859
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The functions which test to see if a device is mounted can get
confused by entries in /etc/mtab for virtual filesystems:
rootfs / rootfs rw 0 0
none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
If the device name doesn't start with a slash, ignore the /etc/mtab
entry, so that relative pathnames passed into functions such as
ext2fs_check_mount_point() or ext2fs_check_if_mounted() don't return
false positives.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On my FC8 install, ismounted.c fails to build because open(O_CREAT) is
used without passing a mode. The following trivial patch fixes it.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When fgets() function fails, contents of the buffer is undefined. That
is, fgets() return value needs to be checked, to avoid undefined behavior.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
support for loopback-mounted filesystems. Check /etc/mtab
if /proc/mounts doesn't turn up any mount flags, since
/etc/mtab has the loopback image filename, instead of
/dev/loop0. Also, check based on st_dev and st_ino, so
that if a relative pathname or a pathnames using symbolic
links are used, we can detect the the filesystem correctly
in those cases. (Addresses Sourceforge bug #619119)
file we are checking is a block device file before looking
at st_rdev, since it's not valid for normal files.
(is_swap_device): Move so that it is outside the
HAVE_MNTENT_H, so that it is always built.
ext2fs_check_if_mounted and ext2fs_check_mount_point which
determines whether or not the specified device is a swap
device by using /proc/swaps. More bulletproofing for
idiotic/careless system administrators!
/etc/mtab to make sure the filesystem is really mounted,
since some broken distributions (read: Slackware) have
buggy boot scripts that don't initialize /etc/mtab before
checking non-root filesystems. (Slackware also doesn't
check the root filesystem separately, and reboot if the
root filesystem had changes applied to it, which is
dangerous and broken.)
ismounted.c (check_mntent_file): Use a test file in / to check to see
if the root filesystem is mounted read-only. This protects against
the case where /etc might not be on /, as well as the case where
/etc/mtab doesn't exist. (Both are should-never happen scenarios, but
you never know...)
ismounted.c: More cleanups for ismounted.c, some from Andreas, some to
clean up Andreas's patches. Use strncpy instead of strcpy to save the
root's mountpoint. Clean up #ifdef structure. Remove uneeded
variable in testing/debug driver.
ismounted.c: Add check for root device which doesn't depend on
/etc/fstab or /proc/mounts to be correct. Don't call endmntent()
before we are done with mnt struct.
ismounted.c (check_mntent): Check /proc/mounts on Linux systems before
checking /etc/mtab. The EXT2_MF_READONLY flag is now set from the
/etc/mtab options field for all filesystems, not just the root
filesystem. Add debugging code to make it easier to test
ext2fs_check_if_mounted().
alloc.c, bb_inode.c, bitmaps.c, bitops.h, block.c, bmap.c, bmove.c,
brel.h, cmp_bitmaps.c, dblist.c, dblist_dir.c, dir_iterate.c,
expanddir.c, ext2fs.h, ext2fsP.h, fileio.c, finddev.c, get_pathname.c,
icount.c, inode.c, irel.h, irel_ma.c, ismounted.c, link.c, lookup.c,
mkdir.c, mkjournal.c, namei.c, newdir.c, read_bb_file.c, test_io.c,
tst_iscan.c, unix_io.c, unlink.c: Change use of ino_t to ext2_ino_t,
to protect applications that attempt to compile
-D_FILE_OFFSET_BITS=64, since this inexplicably changes ino_t(!?). So
we use ext2_ino_t to avoid an unexpected ABI change.
ismounted.c: add ext2fs_check_mount_point() function, which will
optionally return the mount point of a device if mounted
ChangeLog, closefs.c, ext2fs.h:
ext2fs.h, closefs.c (ext2fs_flush): Add new flag,
EXT2_FLAG_SUPER_ONLY, which the close routines to only update the
superblock, and not the group descriptors.
debugfs.c (dump_inode): Remove #ifdef for i_version vs. i_generation
since we know it will always be i_generation now.
ChangeLog, e2fsck.h, flushb.c, scantest.c:
e2fsck.h, flushb.c, scantest.c: Remove uneeded include of linux/fs.h
bmap.c:
Fix silly spelling typo.
ChangeLog, getsize.c, ismounted.c, swapfs.c:
getsize.c, ismounted.c: Remove unneeded include of linux/fs.h
swapfs.c: Remove #ifdef HAVE_EXT2_INODE_VERSION since it's not needed
any more; we know it will always be i_generation. Add support for
swapping the high bits of the uid and gid.
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
dblist.c (ext2fs_get_num_dirs): Make ext2fs_get_num_dirs more paranoid
about validating the directory counts from the block group
information.
all files: Don't include stdlib.h anymore; include it in ext2_fs.h,
since that file requires stdlib.h
ChangeLog, Makefile.in, dirinfo.c:
dirinfo.c (e2fsck_add_dir_info): Use ext2fs_get_num_dirs instead of
e2fsck_get_num_dirs, which has been removed.
Makefile.in (PROGS): Remove @EXTRA_PROGS@, since we don't want to
compile and install flushb.
ChangeLog, configure.in:
Remove @EXTRA_PROGS@, since we aren't using it in 2fsck/Makefile.in anymore
ChangeLog, Makefile.in:
Install debugfs in /sbin, instead of /usr/sbin.
libext2fs.texinfo:
Update version string to be 1.12
Makefile.in:
Fix bug in find script which made the exclusion list, where a '-' was
missing from an -name option.
alloc.c (ext2fs_alloc_block): New function which allocates a
block and updates the filesystem accounting records
appropriately.
ext2_err.et.in: Added new error codes: EXT2_NO_MEMORY,
EXT2_INVALID_ARGUMENT, EXT2_BLOCK_ALLOC_FAIL, EXT2_INODE_ALLOC_FAIL,
EXT2_NOT_DIRECTORY
Change various library files to use these functions instead of EINVAL,
ENOENT, etc.
ChangeLog, pass1.c, pass3.c:
pass3.c (get_lost_and_found): Check error return of
EXT2_FILE_NOT_FOUND instead of ENOTDIR
pass1.c (pass1_check_directory): Return EXT2_NO_DIRECTORY instead of
ENOTDIR
expect.icount:
Change expected error string to be "Invalid argument passed to ext2 library"
instead of just "Invalid argument"
dosio.c: New file to do DOS/BIOS disk accesses.
namei.c (open_namei): Make pathlen be of type size_t.
llseek.c: Always #include stdlib.h since it's need to define
size_t.
io.h: Use errcode_t for magic numbers.
icount.c (get_icount_el), dupfs.c (ext2fs_dup_handle), dblist.c
(dir_block_cmp): Use size_t where appropriate.
read_bb.c (ext2fs_read_bb_inode), cmp_bitmaps.c
(ext2fs_compare_inode_bitmap): Use blk_t, ino_t and size_t
where appropriate.
closefs.c (ext2fs_flush): Use dgrp_t instead of int where
appropriate.
openfs.c (ext2fs_open), check_desc.c (ext2fs_check_desc): Use blk_t
instead of int where appropriate.
rw_bitmaps.c (read_bitmaps), irel_ma.c, inode.c (ext2fs_write_inode),
initialize.c (ext2fs_initialize): brel_ma.c: Fix to make be
16-bit safe.
link.c (ext2fs_link), unlink.c (ext2fs_unlink), lookup.c (lookup_proc),
ismounted.c (ext2fs_check_if_mounted), block.c (xlate_func):
Add #pragma argsused for Turbo C.