Fix a file handle leak for the target file in copy_file() when error
handlers return without closing the file. Instead, clean up at the
end of the function to handle cleanup in normal and error cases.
Minor other code style cleanups.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This allows us to verify quota information in an ext4 file systems
with the quota feature.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Aditya Kali <adityakali@google.com>
In response to reviewer comments, commit fe56188b07 included changes
that modified some of the code used to output error messages when
checking user-supplied block numbers. These changes converted calls
to parse_ulonglong() to calls to strtoblk(). Because strtoblk() calls
parse_ulonglong(), and both output error messages, two redundant and
relatively generic messages were output on each error.
Fix this by removing the error message output from strtoblk(), and
extending it to accept an optional error message argument that it
supplies in lieu of a default to parse_ulonglong(). Also, revert to
the more descriptive original error messages with mods per reviewer
comments, and fix an error message in do_replace_node().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit a17e9f30 set up the extent header for a new file.
Unfortunately it didn't correctly handle byte swapping; fix this so
the regression tests pass on PowerPC systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Eric Sandeen <sandeen@redhat.com>
Commit fe56188b07 modified the code used to check the block number
argument to the command line -s switch, adding a call to com_err().
This causes a compile time warning because the third argument to
com_err() isn't a string. Also, when the block number argument is
bad it outputs an incorrect error message - "Operation not permitted".
Fix these minor problems by removing the call to com_err(). Other
code provides enough error reporting information in this case.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
debugfs should use strtoull wrappers for reading block numbers from
the command line. "unsigned long" isn't wide enough to handle block
numbers on 32bit platforms.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We should really use the ext2fs memory allocator functions in
copy_file(), and we really should return a value if there's allocation
problems.
Also fix up a minor bogosity in an error message.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: Robert Yang <liezhi.yang@windriver.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The help text for debugfs' init_filesys command is incorrect; the
second parameter is the size of the filesystem in blocks, not the size
of an individual filesystem block. There is in fact no way to set
that parameter.
Reported-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ussage message for the open and filefrag commands were missing
options; this commit fixes this.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
commit 2ae5d1fdb8 was supposed to teach
'seti' and 'freei' to act on a range of consecutive inodes. apparently
only 'seti' has learned: 'freei' doesn't advance the ino, repeatedly
acting on the same one instead.
Signed-off-by: Lev Solomonov <solo@primarydata.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix the checking of s_mmp_block in e2fsck_pass1() and
ext2fs_mmp_read() to handle the high 32 bits of s_blocks_count.
Remove redundant check of s_mmp_block in do_dump_mmp() right before
ext2fs_mmp_read() is called.
Also fix s_blocks_count_hi in check_backup_super_block(), since it
cannot use the ext2fs_blocks_count() helper easily.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Let debugfs do sparse copy when src is a sparse file, just like
"cp --sparse=auto"
* For the:
#define IO_BUFSIZE 64*1024
this is a suggested value from gnu coreutils:
http://git.savannah.gnu.org/gitweb/?p=coreutils.git;a=blob;f=src/ioblksize.h;h=1ae93255e7d0ccf0855208c7ae5888209997bf16;hb=HEAD
* Use malloc() to allocate memory for the buffer since put 64K (or
more) on the stack seems not a good idea.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The max length of debugfs argument is 256 which is too short, the
arguments are two paths, the PATH_MAX is 4096 according to
/usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux
systems), that's also what the ss library uses.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
do_write doesn't fully set up the first extent header on a new
inode, so if we write a 0-length file, and don't write any data
to the new file, we end up creating something that looks corrupt
to kernelspace:
EXT4-fs error (device loop0): ext4_ext_check_inode:464: inode #12: comm ls: bad header/extent: invalid magic - magic 0, entries 0, max 0(0), depth 0(0)
Do something similar to ext4_ext_tree_init() here, and
fill out the first extent header upon creation to avoid this.
Reported-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Robert Yang <liezhi.yang@windriver.com>
Add support for symbolic links using a new symlink command. Modeled
after the do_mkdir() command.
Testing demonstrates both fastlinks and slowlinks work correctly.
Very long target paths fail as the command parsing appears to truncate
the input to somewhere around 256 bytes.
Signed-off-by: Darren Hart <dvhart@infradead.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Andreas Dilger <adilger@dilger.ca>
Fix the missing function prototypes from the recently added new
debugfs commands, plus some signed vs unsigned comparison complaints.
Also change the abbreviation of the block_dump command from "bp" to
the more appropriate "bp".
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit adds the functionality which had previously only been in
the tst_extents command to debugfs. The debugfs command extent_open
will open extent tree of a particular inode, and enables a series of
commands which will allow the user to interact with the extent tree
directly. Once the extent tree is closed via extent_open(), these
additional commands will be disabled again.
This commit exports two new functions from lib/ext2fs/extent.c which
had previously been statically defined: ext2fs_extent_node_split() and
ext2fs_extent_goto2().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create a version of debugfs which only supports read-only examination
of the file system metadata (but not the data blocks). The idea is
that this version of debugfs might be suitable to be setuid root, and
executable only by members of a particular group, or setgid disk, and
globally executable, depending on the security/privacy policies in
force at a particular site.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Several small fixes:
* Gracefully fail mmp commands if fs is not open
* Show magic number in dump_mmp command
* Fix header in output for set_mmp_value -l
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext2fs_file_acl_block() and ext2fs_set_file_acl_block() needs to
only check i_file_acl_high if the 64-bit flag is set. This is needed
because otherwise we will run into problems on Hurd systems which
actually use that field for h_i_mode_high.
This involves an ABI change since we need to pass ext2_filsys to these
functions. Fortunately these functions were first included in the
1.42-WIP series, so it's OK for us to change them now. (This is why
we have 1.42-WIP releases. :-)
Addresses-Sourceforge-Bug: #3379227
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Multi-mount protection is feature that allows mke2fs, e2fsck, and
others to detect if the filesystem is mounted on a remote node (on
SAN disks) and avoid corrupting the filesystem. For e2fsprogs this
means that it checks the MMP block to see if the filesystem is in use,
and marks the filesystem busy while e2fsck is running on the system.
This is useful on SAN disks that are shared between high-availability
servers, or accessible by multiple nodes that aren't in HA pairs. MMP
isn't intended to serve as a primary HA exclusion mechanism, but as a
failsafe to protect against user, software, or hardware errors.
There is no requirement that e2fsck updates the MMP block at regular
intervals, but e2fsck does this occasionally to provide useful
information to the sysadmin in case of a detected conflict.
For the kernel (since Linux 3.0) MMP adds a "heartbeat" mechanism to
periodically write to disk (every few seconds by default) to notify
other nodes that the filesystem is still in use and unsafe to modify.
Originally-by: Kalpak Shah <kalpak@clusterfs.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The blocks command prints out the blocks used by a particular inode,
in a format which is useful for test suite automation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the EXT2_I_SIZE() macro consistently to access the inode size.
The i_size/i_size_high combination is open coded in several places.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix several types of compiler warnings (unused variables/labels),
uninitialized variables, etc that are hit with gcc -Wall.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use "[u]" instead of "[uninit]" and limit the amount of detail printed
for the extent tree blocks, so it is more similar to the format used
for direct/indirect mapped inodes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After cleaning up ext2fs_bg_flag_set() and ext2fs_bg_flag_clear(),
we're left with ext2fs_bg_flag_test(). Convert it to
ext2fs_bg_flags_test().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the cmd_file is not stdin, we should close the file handle via fclose().
Thanks David Binderman to point this out.
Addresses-Novell-Bugzilla: #524526
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Extend the stat command to display more detailed extent information if
the file uses extent mapping instead of displaying the block map using
the block_iterate funtion.
Add the command dump_extents which displays even more detailed
information about an inode's extent tree.
This commit is an extension of a patch from Curt Wohlgemuth.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>