It seems that if we have the test_filesystem flag set on an ext3
filesystem(!) on a system which provides ext4, blkid gets confused.
According to the current logic:
* It's not an ext4dev filesystem, because the system provides ext4.
* It's not an ext4 filesystem, because it has no ext4 features.
* It's not an ext3 filesystem, because the test flag is set.
In the end, it's nothing.
blkid should return *something* that is mountable... I'm inclined to
think that ext3 should be the right answer, if no ext4-specific features
are set.
This would mean just dropping the EXT2_FLAGS_TEST_FILESYS test in
probe_ext3(), because ext4 & ext4dev probes have come first already.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix blkid_get_dev() so it will never return a device structure if the
device file doesn't exist.
Addresses-Debian-Bug: #502541
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a block device is read-only, e2fsck -p gets into an infinite loop
trying to preenhalt, closing and flushing the fs, which tries to flush
the cache, which gets a write error and calls preenhalt which tries to
close and flush the fs ... ad infinitum.
Per Ted's suggestion just flag the ctx as "exiting" and short-circuit
the infinite loop.
Tested by running e2fsck -p on a block device set read-only by BLKROSET.
Thanks to Vlado Potisk for reporting this.
Addresses-Red-Hat-Bugzilla: #465679
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we don't check for new_size == 0, bogus values send resize2fs into
a tailspin:
resize2fs 1.41.0 (10-Jul-2008)
Illegal block number passed to ext2fs_test_block_bitmap #1 for block bitmap for
/tmp/tmp.lntZtMFvz8/fake-disk
...the same message repeated zillion times...
Probably should see where that loop is, but at any rate we should
error-check parse_num_blocks.
Thanks to Petr Muller for reporting this.
Addresses-Red-Hat-Bugzilla: #465984
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we open a device on linux, test whether it is writable
right away, rather than trying to proceed and clean up when
writes start failing.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If only ext4 is available (as a module or in /proc/filesystems)
blkid wasn't properly testing for it, because the time checks
were backwards and always failed. This caused old ext4dev
filesystems to fail to mount as ext4. With this patch it works
fine.
Also, don't try to check for modules on a non-Linux system.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some applications repeatedly re-exec themselves, and if they use the
com_err library, they can leak a file descriptor for each re-exec.
Fix this by setting the close-on-exec flag on the debug file
descriptor. In addition, if the COMERR_DEBUG environment variable
isn't set, don't open the file handle at all.
Addresses-Red-Hat-Bugzilla: #464689
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Always initialize the starting time so that badblocks -sw works.
Thanks Jelle de Jong (jelledejong at powercraft.nl) for reporting this
bug.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check the return value of ext2fs_get_mem, since prog isn't initialized
so checking may miss a failed memory allocation.
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ncheck command in debugfs had a bug where some inodes would not
have their pathnames printed if other inodes had more than one hard
link. Fix this bug and simplify the code by printing all of the
pathnames for the requested inodes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
SuSE has been carrying a patch for a long time to prevent a largely
theoretical race condition if a multi-threaded application adds and
removes error tables in multiple threads. Unfortunately SuSE's
approach breaks compatibility by forcing applications to link and
compile with the -pthread option; using pthread mutexes has
historically been problematic.
This commit fixes things in a more portable way by using
sem_post/sem_wait instead, which is an older interface that doesn't
require the pthreads library. Linux happens to implement
sem_post/sem_init using futexes, and -lrt ends up pulling in
-lpthread, but the advantage of using POSIX semaphores is that
applications don't have to be built using -pthread, unlike the use of
pthread mutexes.
The add_error_table() and remove_error_table() interfaces are the
preferred interfaces and locking protection have been added to only
these interfaces. I have not added locking protection to the
generated initialize_xxx_error_table and initialize_xxx_error_table_r
interfaces, to avoid adding symbol dependencies that would cause a
library to fail to work when linking against older com_err libraries
that do not export et_list_lock() and et_list_unlock(). Threaded
applications shouldn't be using these interfaces in any case.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes a regression introduced in commit 4f2e8f19 where we
inadvertently disabled the use of dietlibc on all architectures,
instead of just on those architectures which didn't support dietlibc.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some recent changes had caused diet libc support to bitrot. Fix up
missing header files and other portability fixups needed for dietlibc.
(Many of these changes also improve general portability.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes a regression that was introduced in commit dcc91e10 (it
showed up first in e2fsprogs 1.40.7). Since we weren't freeing the
filesystem handle, ext2fs_open2() was returning EBUSY, and so this
caused a failure in the code that would automatically determine the
filesystem block size when only the superblock number was specified by
the user.
This was discussed in http://ubuntuforums.org/showthread.php?t=789323,
and Matthias Bannach pointed this out to me, for which I am very
grateful.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
gen-tarball currently assumes that the top-level directory is called
e2fsprogs, which breaks building the tarball if it's named differently.
Since we have already computed the basename, let's use it.
Signed-off-by: Matthias Andree <matthias.andree@gmx.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Thanks to A. Costa for pointing these out.
Addresses-Debian-Bug: #498100
Addresses-Debian-Bug: #498101
Addresses-Debian-Bug: #498102
Addresses-Debian-Bug: #498103
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When installing the ELF link library, avoid using absolute pathnames
if $(root_libdir) and $(libdir) are the same.
Addresses-Sourceforge-Bug: #1782913
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A few e2fsck problem messages supply their own prompt, and set a
prompt value of PROMPT_NULL. We have to check for this case, and not
pass the null string to _(), since that will result in the translation
header getting printed, like this:
Run journal anywayProject-Id-Version: e2fsprogs
Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>
POT-Creation-Date: 2008-02-28 21:45-0500
PO-Revision-Date: 2006-05-23 11:12+0000
Last-Translator: Somebody32 <som32@mail.ru>
Language-Team: Russian <ru@li.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 &&
n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;
X-Launchpad-Export-Date: 2008-05-28 00:43+0000
X-Generator: Launchpad (build Unknown)
<y>? yes
Addresses-Launchpad-Bug: #246892
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also the progname printed as "ncheck" instead of "do_ncheck" to be
consistent with the other error messages in debugfs.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
... especially when using ELF shared libraries. We only need to link
with a library if the executable uses that library directly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Eric Sandeen