This is needed to enable 64-bit mke2fs to work correctly.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: Nick Dokos <nicholas.dokos@hp.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext2fs_bg_flag* functions were confusing.
Currently we have this:
void ext2fs_bg_flags_set(ext2_filsys fs, dgrp_t group, __u16 bg_flags);
void ext2fs_bg_flags_clear(ext2_filsys fs, dgrp_t group,__u16 bg_flags);
(_set (unused) sets exactly bg_flags; _clear clears all and ignores bg_flags)
and these, which can twiddle individual bits in bg_flags:
void ext2fs_bg_flag_set(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
void ext2fs_bg_flag_clear(ext2_filsys fs, dgrp_t group, __u16 bg_flag);
A better interface, after the patch below, is just:
ext2fs_bg_flags_zap(fs, group) /* zeros bg_flags */
ext2fs_bg_flags_set(fs, group, flags) /* adds flags to bg_flags */
ext2fs_bg_flags_clear(fs, group, flags) /* clears flags in bg_flags */
and remove the original ext2fs_bg_flags_set / ext2fs_bg_flags_clear.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Below patch ensures that cleanup is done properly in ext2fs_initialize
from all return paths in case of errors.
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some bootloaders, like SILO, don't provide sprintf in their limited
bootloader environment. Since the uses in rw_bitmaps.c is only doing
sprintf("foo %s"), it's easy to replace that usage with strcpy/strcat.
Addresses-Sourceforge-Bug: #2049120
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we fail doing ext2fs_allocate_block_bitmap() or
ext2fs_allocate_inode_bitmap() we directly goto cleanup and don't free
the memory allocated to buf.
Signed-off-by: "Manish Katiyar" <mkatiyar@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change the way we allocate bitmaps and inode tables if the FLEX_BG
feature is used at mke2fs time. It places calculates a new offset for
bitmaps and inode table base on the number of groups that the user
wishes to pack together using the new "-G" option. Creating a
filesystem with 64 block groups in a flex group can be done by:
mke2fs -j -I 256 -O flex_bg -G 32 /dev/sdX
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This fixes some bugs which I introduced recently while revamping the
uninit_bg code. Since mke2fs is no longer calling
ext2fs_set_gdt_csum(), it's important that ext2fs_initialize()
correctly initialize bg_itable_unused for all block group descriptors.
In addition, mke2fs needs to zero out the the reserved inodes based on
the values of bg_itable_unused set by ext2fs_initialize().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mke2fs used to have special case, ugly code in
setup_lazy_bg/setup_uninit_bg flag which set the flags based on all
sorts of special cases. Change it so that it is done in libext2fs,
and fix mke2fs to use alloc_stats functions which will take care of
clearing the *_UNINIT flags automatically as needed.
This is preparatory work to make the flex_bg allocation patch much
cleaner.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Set the s_min_extra_isize and s_wanted_extra_isize superblock fields
to reasonable defaults in ext2fs_initialize().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is useful for mballoc to align block allocation on the RAID
stripe boundaries.
Signed-off-by: Rupesh Thakare <rupesh@clusterfs.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The test_fs flag is an "ok to be used with test kernel code" flag. It
makes it easier for us to determine whether a filesystem should be
mounted using ext4 or not.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This addresses a potential security vulnerability where an untrusted
filesystem can be corrupted in such a way that a program using
libext2fs will allocate a buffer which is far too small. This can
lead to either a crash or potentially a heap-based buffer overflow
crash. No known exploits exist, but main concern is where an
untrusted user who possesses privileged access in a guest Xen
environment could corrupt a filesystem which is then accessed by the
pygrub program, running as root in the dom0 host environment, thus
allowing the untrusted user to gain privileged access in the host OS.
Thanks to the McAfee AVERT Research group for reporting this issue.
Addresses CVE-2007-5497.
Signed-off-by: Rafal Wojtczuk <rafal_wojtczuk@mcafee.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add macros to support variable-length group descriptors for ext4.
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For some odd geometries*, mkfs will try to allocate inode tables off
the end of the block group and fail, rather than warning that too
many inodes have been requested.
This is because when ext2fs_initialize calculates metadata overhead,
it is only adding in group descriptor blocks and the superblock
if the *last* bg contains them - but the first bg also has all of
the various metadata bits taking up space.
We need to calculate the overhead both for the first block group and
the last block groups separately, since the two different tests need
to know what the overheads are for those two cases, which may be
different.
*for example "mke2fs -b 1024 -m 0 -g 256 -N 3745 fsfile 1024"
(Note, the test here is a little funky; the expected output is
actually a mkfs failure - but a proper failure instead of the
allocator catching the problem at the last minute)
Addresses-Red-Hat-Bugzilla: #241767
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsprogs and kernel implementation of directory hash tree has a
bug which causes the implementation to be dependent on whether
characters are signed or unsigned. Platforms such as the PowerPC,
Arm, and S/390 have signed characters by default, which means that
hash directories on those systems are incompatible with hash
directories on other systems, such as the x86.
To fix this we add a new flags field to the superblock, and define two
new bits in that field to indicate whether or not the directory should
be signed or unsigned. If the bits are not set, e2fsck and fixed
kernels will set them to the signed/unsigned value of the currently
running platform, and then respect those bits when calculating the
directory hash. This allows compatibility with current filesystems,
as well as allowing cross-architectural compatibility.
Addresses Debian Bug: #389772
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new function, ext2fs_div_ceil(), which correctly calculates a division
of two unsigned integer where the result is always rounded up the next
largest integer. This is used everywhere where we might have
previously caused an overflow when the number of blocks
or inodes is too close to 2**32-1.
Based on patches from Eric Sandeen, but generalized to use this new function
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
This flag when specified to ext2fs_open or ext2fs_initialize indicates
that the application wants the io_channel to be opened in exclusive mode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If fs->now is non-zero, use that as the time instead of the system
time when setting various filesystem fields (last modified time, last
write time, etc.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
any debugging statements from within library code (always a bad idea), and
ext2fs_create_resize_inode() will return a proper error code if the
resize inode is corrupt, instead of returning -1.
the superblock and block group descriptors into two functions:
ext2fs_reserve_super_and_bgd, found in lib/ext2fs/alloc_sb.c, and
ext2fs_super_and_bgd_lock, found in lib/ext2fs/close.c.
Change e2fsck/pass1.c (mark_table_blocks), lib/ext2fs/closefs.c
(ext2fs_flush), lib/ext2fs/initialize.c (ext2fs_initialize),
and misc/dumpe2fs.c (list_desc) to use these functions.
e2fsck/ChangeLog
pass1.c (mark_table_blocks): Use the new function
ext2fs_reserve_super_and_bgd to calculate the blocks to be
reserved.
lib/ext2fs/ChangeLog
closefs.c (ext2fs_super_and_bgd_loc): New function which
centralizes the calculation of the superblock and block
group descriptors.
(ext2fs_flush): Use ext2fs_super_and_bgd_lock to figure
out where to write the superblock and block group
descriptors.
alloc_sb.c (ext2fs_reserve_super_and_bgd): New function which
reserves space in the block bitmap using
ext2fs_super_and_bgd_loc.
initialize.c (ext2fs_initialize): Use
ext2fs_reserve_super_and_bgd to initialize the block bitmap.
misc/ChangeLog
dumpe2fs.c (list_desc): Use ext2fs_super_and_bgd_loc to
determine the locations of the superblock and block group
descriptors.
large number of inodes, then reduce the number of blocks
per group until we find a workable set of filesystem
parameters.
ext2_err.et.in (EXT2_ET_TOO_MANY_INODES): Add new error code.
the filesystem was created. It is set via mke2fs, and printed
via list_super2() (which is called by dumpe2fs).
Also, list_super2() will now print "n/a" if the last mount time
(s_mtime) is zero.
8192-byte and 16384-byte blocksize filesystems.
Change the default bytes-per-inode ratio of a new filesystem to be at most
one inode per block for large blocksizes.
since files which get dropped into that directory may have come
from a protected directory, and the system administrator may not
deal with immediately. (Addresses Debian bug #118443)
Makefile.in: Add message.c and swapfs.c to the list of source files to
build the make depend.
swapfs.c, unix.c: Only support the -s and -S options to e2fsck if
ENABLE_SWAPFS is defined.
Many files:
ext2fs.h, bitops.h, block.c, bmap.c, closefs.c, dirblock.c, inode.c,
native.c, openfs.c, rw_bitmaps.c, swapfs.c: Only include the
byte-swapping logic if ENABLE_SWAPFS is turned on or if we're on a
big-endian machine.
initialize.c (ext2fs_initialize):Use WORDS_BIGENDIAN directly to set
EXT2_FLAG_SWAP_BYTES, instead of using ext2fs_native_flag.
native.c (ext2fs_native_flag): Use WORDS_BIGENDIAN provided by
autoconf to determine whether or not return EXT2_FLAG_SWAP_BYTES.
initialize.c (ext2fs_initialize): Add support for initializing the
ext2 superblock for external journal devices. This basically means we
don't bother to allocate any block group descriptors.
openfs.c (ext2fs_open): Only open external journal devices if the new
flag EXT2_FLAG_JOURNAL_DEV_OK is passed to ext2fs_open. When opening
such devices, don't try to read the block group descriptors, since
they're not there.
ext2_err.et.in (EXT2_NO_JOURNAL_SB): Add new error code
mkjournal.c: Export a new function,
ext2fs_create_journal_superblock(), which allocates and returns a
buffer containing a journal superblock. This is needed by mke2fs to
create an external journal. Rewrote ext2fs_add_journal_device() so
that it no longer creates the external journal, but rather adds a
filesystem to an existing external journal. It handles all of the
UUID manipulation.
ext2fs.h: List the EXT3_FEATURE_JOURNAL_DEV as a flag supported by the
library. Define the EXT2_FLAG_JOURNAL_DEV_OK. Changed function
prototype for ext2fs_add_journal_device().